Upload
nguyennhi
View
213
Download
0
Embed Size (px)
Citation preview
Introduction to Centurion Safety Products 2
Hard Hat and Bump Cap Standards 2
Lightweight Hard Hat 4
General Purpose Hard Hats 5
Specialized Hard Hats 6 & 7
High Temperature Hard Hat 8
Anti Electric Arc System 8
Face Protection 8
Seasonal Products and Spares 9
Bump Caps 10 & 11
P a g e
Contents
2
Centurion Safety Products is a market leading manufacturer of industrial hard hats. Established in Norfolk, England in 1879, Centurion have produced Personal Protective Equipment since the first World War, manufacturing hard hats for the military.
ANSI Electrical Insulation RequirementsClass E Withstand 20,000 volts AC, 60 Hertz, for 3 minutes. Leakage shall not exceed 9 milliamperes.Class G Withstand 2,200 volts AC, 60 Hertz, for 1 minute. Leakage shall not exceed 3 milliamperes.Class C Not tested for electrical insulation
70.9 inches3.8 kiloNewtons (average)64 joules1.9in radius hemispherical, 7.9lb
118.1 inches30 joules2.2lbs
9.8 inches15 kiloNewtons12.5 joules3.9in diameter flat, 11.0lbs
19.7 inches2.5 joules1.1lbs
Drop height Maximum force allowed Energy Transmitted during test Striker face and weight Drop height Energy Transmitted during test Striker mass
Penetration Resistance ANSI - Safety Hard Hats EN 812 - Bump Caps
Shock Absorption/Impact Resistance ANSI Z89 - Safety Hard Hats EN 812 - Bump Caps*
Hard Hat and Bump Cap StandardsMandatory tests:
Hard hats are used in industry to provide protection to the wearer against falling objects and consequential brain injury and/or skull fracture.
Bump Caps provide protection to the wearer against the effects of striking the head/scalp against hard or sharp stationary objects. Not intended to provide protection against the effects of falling, thrown objects, moving or suspended loads.
-22°F Low temperature performanceEN 812 Optional test: * Note: There are no existing ANSI Standards for Bump Caps
Today Centurion manufactures hard hats for general purpose and specialized applications as well as producing face and hearing protection accessories under the Connect brand.
Our commitment is to first class product quality with the ability to respond quickly to changes in legislation and market requirements. This, combined with the Centurion policy of innovation and rigorous testing in product development, ensures that now and in the future the company offers products and services which meet customer demands quickly and efficiently.
3
Made in the U.K.All Centurion industrial safety helmets are produced in our manufacturing plant in Norfolk, United Kingdom.
°
Penetration ResistanceShock Absorption
General Purpose Hard Hats
5
PLUS
PLUS
Colors available
* Insert Color code of helmet (i.e. W for White)
Product CodeReflex Plus Mid Peak High Vis.^ Rear Flash S12PLUS*HVY/OAReflex Plus Mid Peak Silver Rear Flash S12PLUS*SA Reflex Plus Mid Peak High Vis.^ Shell & Flash S12PLUSHV*HV*A Above with Standard Ratchet S12PLUS**R
The Reflex Plus hard hat has many safety features including extra strength due to the Acrylonitrile-Butadiene-Styrene (ABS) shell. - High visibility shell/rear flash options - Clip-on Reflectors available as spare - Textile cradle and standard sweatband - Ventilation provided as standard - Low temperature performance (-22°F) - ANSI LT option - Approved to ANSI/ISEA Z89.1-2009 Type 1, Class C LT European Standards: EN 397, MM, LD, -40°F and EN 50365
^ High Visibility Colors - slight variations in color density may be apparent over time but in no way affect the safety and performance of the product.
TM
1125
Colors Available
Product CodeFull Peak S03*A Full Peak with Ratchet S03*R * Insert Color code of helmet (i.e. W for White)
A general purpose, well balanced High Density Polyethylene (HDPE) hard hat with a 6 point Terylene cradle and a comfortable standard sweatband. - Approved to ANSI/ISEA Z89.1-2009 Type 1, Class E (20,000V a.c) European Standards: EN 397, 440V a.c, MM, LD, -40oF.
Range of Spares
available for ALL
Hard Hats
W B R Y O G
Product CodeConcept Reduced Peak S08*AConcept Reduced Peak Vented S08*F
Designed to take the weight off your shoulders!Lighter than most other hard hats, providing the user with the lightest, strongest and most comfortable hard hat available.
- 20% lighter than most other hard hats - Vented hard hat - approved to ANSI/ISEA Z89.1-2009 Type 1, Class C European Standards: EN 397, LD, -40°F and EN 50365 - Non-Vented hard hat - approved to ANSI/ISEA Z89.1-2009 Type 1, Class E (20,000V a.c) European Standards: EN 397, LD, 1000V a.c, MM, -40°F and EN 50365 - Manufactured from tough Acrylonitrile-Butadiene-Styrene (ABS) material- Extended nape providing increased neck protection- Terylene cradle and ‘Hydro-Flock’ premium high absorbent sweatband
With all the great features and benefits of the standard Concept hard hat, but comes complete with premium ratchet headband.
Product CodeConcept Reduced Peak Ratchet S08*RConcept Reduced Peak Vented Ratchet S08*RF
RatchetWith all the great features and benefits of the standard Concept hard hat, but comes complete with a four point security head harness with a quick release buckle.
Product CodeConcept Reduced Peak Linesman S08*L
Linesman
Less than 11oz†
4
* Insert Color code of helmet (i.e. W for White)
Badge ItService available
ask for details
L ightweight Hard Hat
Colors available
General Purpose Hard Hats
† Weight is approximate and dependent on variant
^ High Visibility Colors - slight variations in color density may be apparent over time but in no way affect the safety and performance of the product.
TM
HVOW B R Y O G LB K E
HVOW B R Y O G LB K E
HVY
HVY
Special ized Hard Hats Special ized Hard Hats
e TM
e TM
Product CodeSpectrum S20*ASpectrum Vented S20*F Spectrum Ratchet S20*RSpectrum Ratchet Vented S20*RFGlasses Clear S576
Premium, comfortable safety hard hat with integrated eye protection.
- High quality, strong Acrylonitrile-Butadiene-Styrene (ABS) shell- Fully integrated protective safety glasses that allow standard prescription glasses to be worn underneath
- Rain Management System - Terylene cradle and premium Hydro-Flock sweatband- Ventilation option- Badge holder accessory for identity card- Glasses approved to ANSI/ISEA Z87.1-2010 Z87+ (Impact rated 300ft/s) Hard Hat approved to ANSI/ISEA Z89.1-2009 Type 1 Class C (Vented) Class E (Non Vented) LT (-22ºF) European Standards: Glasses approved to EN 166 1 B T and EN 170 2C-1,2 Hard Hat approved to EN 397, -40ºF, 1000V a.c, MM, LD and EN 50365 (1000V a.c. and MM - unvented only)
Colors Available
* Insert Color code of helmet (i.e. W for White)
6 7
Range of Spares
available for ALL
Hard Hats
PLUS
PLUS
PLUS
PLUS
Product CodeVision Plus S10PLUSE*A Vision Plus Ratchet S10PLUSE*RVision Plus Visor Clear S577
Colors Available
All the key features of the Vision hard hat below but with a molded visor providing increased impact protection.
-
* Insert Color code of helmet (i.e. W for White)
Product CodeVision S10E*A Vision Ratchet S10E*RVision Visor Clear S578
TM
Specialized Acrylonitrile-Butadiene-Styrene (ABS) hard hat with integrated eye protection.
Striking, modern design, extended nape, reduced peak and a fully retractable visor that allows standard prescription glasses to be worn underneath it. Terylene cradle and ‘Hydro-Flock’ premium high absorbent sweatband.
- Visor approved to ANSI/ISEA Z87.1-2010 Hard hat approved to ANSI/ISEA Z89.1-2009 Type 1, Class E (20,000V a.c.)
Badge ItService available
ask for details
Also available with Premium ‘Twist 2 Fit’ Ratchet.
* Insert Color code of helmet (i.e. W for White)HVOW B R Y O G LB K E
HVOW B R Y O G LB K E
HVY
HVY
Hard Hat approved to ANSI/ISEA Z89.1-2009 Type 1 Class E (20,000V a.c.) LT (-22ºF)
Visor approved to ANSI/ISEA Z87.1-2010 Z87+ (Impact rated 300ft/s)
European Standards:Visor approved to EN 166 1 A T, EN 170 2C-1,2Hard Hat approved to EN 397, -40ºF, 1000V a.c, LD and MM
European Standards:Visor approved to EN 166 1 BHard hat approved to EN 397, -40°F, 1000V a.c, LD and MM
High heat hard hat, ideal for use where there is a risk of high levels of radiant heat. Fitted with standard sweatband and Terylene cradle.
- ANSI/ISEA Z89.1-2009 Type 1 Class G European Standards: EN 397: 440V a.c, MM, LD, 22°F GOST: 22°F, +194°F, LD, 2000V a.c.
TM
- ASTM F2178 NFPA 70 testing pending European Standards: Helmet: EN 397,1000V a.c., LD, MM, -40°F Face Screen: EN 166 and EN 170:2002 GS-ET-29:2010 2C-1.4 1 B 8-2-1 3
The Centurion PPE system has been designed to protect against Arc Flash risks posed by electrical faults which can occur during live cable jointing, phase angle testing, switchgear racking operations, excavating near live cables, isolating and reclosing of switch gear, working on or near live conductors.
TM
8
Seasonal Products and Spares
Product CodeHydro-Flock (Premium) Sweatband S31FBrushed Nylon (Standard) Sweatband S31NVabon Sweatband S31WPVC Sweatband S31PElasticated Chinstrap S30EConcept 4-point Harness S30YHigh Intensity Reflective Stickers S30HIRSConcept VentPlug S30VPHard Hat LED Light S32FMHLBaseball Bump Cap LED Light S32CML
NEW! Hard Hat Lamp Bracket and Cable Clip For Concept* S30LBCCFor Spectrum S30SLBCC* will also fit to Vision Plus, Vision and Reflex Plus hard hats
Replacement cradle/headbands are available for all hard hats- for details, refer to the Centurion web site.
Ideal for cold food storage or any outdoor applications.Modular system can be adapted to suit the weather conditions.
Sun Cape
Cold Weather Hood System
Ideal for all sunny outdoor applications.Protects the neck from sun burn and harmful UV rays with it’s UltraViolet Protection Factor UPF 50+.
S51HVY (High Visibility Yellow) S51HVO (High Visibility Orange)
Product CodeUniversal Fleece Liner S50UFLFrost Cape High Visibility Yellow S50HVYFC Frost Cape High Visibility Orange S50HVOFC Face Warmer S50FWFrost Cape with Ear Defender compatibility High Visibility Yellow S50HVYEDFCFrost Cape with Ear Defender compatibility High Visibility Orange S50HVOEDFCFace Warmer S50FWSpecialized Fleece Helmet Liner S50FLSPSpecialized Frost Cape S50NBFCSP
Spares
9
Product Code Face Screen Bracket S54 Polycarbonate Clear Face Screen S590 - Approved to ANSI/ISEA Z87.1-2010
General purpose face protection is available to fit to all Centurion hard hats.
High Temperature Hard Hat
Product CodeS22 S22*A S22 with Ratchet S22*R
* Insert Color code of helmet (i.e. W for White)
Colors AvailableW B R Y O G
TM
Face Protect ion - Special ized and General
Specialized Face Protection
General Purpose Face Protection
Product CodeLight-Medium Green Face Screen, Chin Guard and Bracket S512S57Helmet Kit - Above screen with Concept Helmet S25WCC12AEA
Green Screen
Above also compatible with the Specialised Helmet Liner and Frost Cape. Made from DuPontTM Nomex® fabric, which is flame resistant (to EN ISO 11612 A1, B1) and is anti-static (to EN 1149-3). The Nomex® Comfort fabric is also Arc Rated (to Class 2 - EN 61482-1-2:2007 box test method) and has an ATPV (Arc Thermal Performance Value) of 7.6 cal/cm².
(For images and product codes refer to page 9.)
DuPont™ and Nomex® are Trademarks or registered Trademarks of E.I. du Pont de Nemours and Company
CodeSpecialized Helmet Liner and Frost Cape, see page 8.
S22
The Three Rib helmet design is a trademark of E.D. Bullard Company used under license
Product Code AirPro Standard Peak S38*AirPro Reduced Peak S38*RPAirPro Proban Navy Blue S38PNB
Lightweight head protection where
high-impact resistance is not essential but
where there is a risk of minor bumps or
scrapes to the head. They are not to be
used as industrial hard hats.
Designed with Comfort, Safety and Style in mind
- Components include breathable fabric to maximize airflow- Inspired new design for optimum head retention- Sleek with a professional look- Proban option with flame retardant properties- Standard peak length 2 inches, reduced peak 1.2 inches- Approved to EN 812:1997+A1:2001, -22°F
Baseball Bump Cap
Badge ItService available
ask for details
Basebal l Bump Caps
10
Colors for Standard Peak
Colors for Reduced Peak
Color for Proban
DuPont™ Teflon® treated baseball cap fitted over an ABS shell.
* Insert Color code of helmet (i.e. NB for Navy Blue)
Basebal l Bump Caps
Product CodeClassic S18*
Colors
Baseball cap fitted over an ABS shell
- Cotton cover with Lycra for ease of fit/removal - Easily adjustable via Velcro rear strap- Large crown ventilation holes with 4 mesh grills- Peak length 2.4 inches- Approved to: EN 812:1997, -22°F
Baseball cap cover and ABS shell
Baseball Bump CapBadge ItService available
ask for details
Classic
*Insert Color code of cap (ie. NB for Navy Blue)
Product CodeCoolCap S28*
Colors
Baseball Bump Cap
3 panel design, brushed cotton baseball cap fitted over an ABS shell
- Sleek 3 panel design with improved side ventilation- Removable foam side inserts (providing 45% more shock absorbency compared to standard ABS liner)- Peak length 2 inches- Approved to EN 812:1997+A1:2001, -22°F
Baseball cap cover and ABS shell
TM
11
*Insert Color code of cap (ie. NB for Navy Blue)
NB RB R K E G
HVYHVO
KNB
NB
NB RB R K E G
NB RB R K G
DuPont™ and Teflon® are Trademarks or registered Trademarks of E.I. du Pont de Nemours and Company
Distributor
Spectrum, Vision Plus, Vision, Concept, Reflex Plus, S22, 1125, AirPro, CoolCap and ArcPro are trademarks of Centurion Safety Products Ltd.
Centurion Safety Products Ltd
Howlett Way, Thetford, Norfolk,
IP24 1HZ, England.
Telephone: +44 (0) 1842 754266
Customer Hotline: +44 (0) 1842 855045
Facsimile: +44 (0) 1842 765590
www.centurionsafety.co.uk
email: [email protected]
LEAFUS13
Standard Symbol Explanation
ANSI/ISEA Z89.1-2009 Type 1 Class C American National Standard for Industrial Head Protection Type 1 Class E 20,000V a.c. Electrical Insulation (American National Standard for Industrial Head Protection) Type 1 Class G 2,200V a.c. Electrical Insulation (American National Standard for Industrial Head Protection) LT Low Temperature (-22°F)
EN 397:1995+A1/EN397:2012+A1:2012 MM Molten Metal - unvented shell only (except for Spectrum, Reflex Plus and Reflex) -4°F/-22°F Low Temperature Performance -40°F Low Temperature Performance (currently outside the scope of EN 397) LD Lateral Deformation 440V a.c./1000V a.c. Electrical Insulation - unvented shell only (1000V a.c. currently outside the scope of EN 397)
EN 50365:2002 Electrically insulating helmets for use on low voltage installations (1000V a.c.)
GOST R 12.4.207-99 +194°F/-22°F Russian Standard for Industrial Head Protection (includes high heat approval to +194°F and low temperature performance to -22°C)
LD/2000V a.c. Russian Standard for Industrial Head Protection (includes Lateral Deformation and 2000V a.c. approval)
EN 812:1997 F Flame Resistant -4°F/-22°F Low Temperature Performance 440V a.c. Electrical Insulation
EN 812:1997+A1:2001 Including 60° and 30° impact protection and all wording specified to a minimum text of 8 points
EN 397:1995+A1/ All Helmets and Bump Caps perform to +122°F and 14°F EN 397:2012+A1:2012 & EN 812:1997/EN 812:1997+A1:2001
H e a d P r o t e c t i o n S t a n d a r d s a n d O p t i o n s
Standard Symbol Explanation
ANSI/ISEA Z87.1-2010 American National Standard for Eye and Face Protection Z87+ Impact Rated (299f/s)
EN 166:2001 1 Optical Class
A High Energy Impact (620f/s)
B Medium Energy Impact (393f/s)
F Low Energy Impact (148f/s)
T Resistance to high speed particles at extreme temperature (23OF and +131OF)
9 Non adherence of molten metal and resistance to penetration of hot solids
3 Protection against liquid droplets/splashes
4 Protection against large dust particles
8 Protection against Short Circuit Electric Arc
EN 170:2002 2C-1,2 For use with sources which emit predominantly Ultra Violet Radiation at wave lengths shorter than 313nm and when glare is not an important factor. This covers the UVC and most of the UVB bands. Low pressure mercury lamps such as germicidal lamps with good colour recognition
2-1, 2 As 2C-1,2 above - colour recognition may be impaired
GS-ET-29 Revision: Supplementary requirements for the testing and certification of face shields for electrical works 1 (2010 - 12)
P e r s o n a l E y e P r o t e c t i o n S t a n d a r d s
Mine and Process Service Inc. Box 484, Kewanee, Illinois 61443
Telephone: 309-852-6529
Facsimile: 309-854-5206
www.go-mpsinc.com
e-mail: [email protected]