Upload
tranhanh
View
218
Download
0
Embed Size (px)
Citation preview
HCE Feeding System
D r y C a l c i u m H y p o c h l o r i t e C h l o r i n a t o r Fo r A g r i c u l t u r a l A p p l i c a t i o n s
DELIVER UNPARALLELED
CONSISTENT RESULTS
PATENTED PILLOW-SHAPED
BRIQUETTES
• Scalable feeders available to fit a wide range of
water treatment needs
• Patented circulation system concentrates and
stabilizes AvCl solution
• Effective alternative to gas and liquid hypochlorite
• Cost effective
• Low flow uses less water than traditional erosion
systems
• Rugged construction is applicable for even harsh
environments
• Requires no storage tanks or secondary
containment
BENEFITS
Specifically created to supply scalable water treatment services for agricultural applications, the Constant Chlor® HCE (High
Capacity Erosion) Feeding System provides growers with an economical water treatment solution with unequaled service and
support. From small scale to high volume, the HCE Feeding System is the delivery system of choice by providing a consistent
chlorine solution when and where it’s needed.
Automatic. Accurate. Consis tent.www.archwaterworks.com/municipal
CALL 1-800-478-5727
CONSTANT CHLOR® PLUSt o f i n d o u t m o r e a b o u t
o r v i s i t o u r w e b s i t e a t
Arch Chemicals, Inc.5660 New Northside Dr NW, Suite 1100
Atlanta, GA 30328
1-800-478-5727
©2011 Arch Chemicals, Inc. All rights reserved. Constant Chlor® is a registered trademark of Arch Chemicals, Inc.
FEATURES
• Available with 75 lb, 150 lb or 300 lb dry chemical capacities
• Unit constructed of 1/2” high impact PVC; all wetted areas, internal
fittings and level controls constructed of suitable plastics or other
non-metallic material
• Intuitive configuration allows for ease of installation and application
• Higher solution concentrations possible
• Shock treatment utilization available
• Low flow requirements
HCE Dry Calcium Hypochlorite Feeding System
CONSTANT CHLOR® BRIQUETTES
When used with Constant Chlor® Plus Briquettes, the HCE Feeding System provides
the perfect chlorine solution for agricultural applications.
These patented, pillow-shaped briquettes contain a scale inhibitor designed to reduce maintenance and
improve reliability of the feeder system.
TYPICAL PROPERTIES• Available Chlorine (wt%). . . . . . . . . . . . . . . . . . 66%• Scale Inhibitor (wt%) . . . . . . . . . . . . . . . . . . 0.5%• Weight . . . . . . . . . . . . . . . . . . 0.25 oz. (7.0 grams)• Dimensions . . . . . . . . . . . . 1-1/4 in. X 3/4 in. X 1/2 in. (approx 35mm X 19mm X 13mm)
• Dry Solid Product
• More stable than liquid bleach
• Occupies much less space than liquid
bleach
• Cost effective
• Less hazardous and easier to handle
than liquid bleach
• Does not leak
• Scale inhibited
• Low capital cost compared to onsite
generation
• Small pillow-shaped briquettes provide
an optimum spray bed pack resulting in
outstanding solution consistency
• Reduces maintenance of equipment
• Patented formulation
The HCE Feeding System passes water
into a holding reservoir until the water
level rises to a bed of briquettes,
saturating the entire bottom of the bed
evenly. The chlorinated solution mixes
into the reservoir where it is stored until
needed in the disinfection application.
Design simplicity drives
value up and long term
maintenance down.
SPECIFICATIONS
By Unit CapacityDry Chemical Capacity
HCE-075 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 lbs.
HCE-150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 lbs.
HCE-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 lbs.
Dimensions
HCE-075 . . . . . . . . . . . . . . . . . . . . . . . . . . . Diameter: 24” Height: 26”
HCE-150 . . . . . . . . . . . . . . . . . . . . . . . . . . . Diameter: 24” Height: 30”
HCE-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . Diameter: 24” Height: 30”
Chlorine Delivery Rate . . . . . . . . . . . . 13.0-1420.0 lb. AvCl/day
with 70º F inlet water temp.
Pressure Range . . . . . . . . . . . . . . . . . . . . . 10 - 150 psig
Water Inlet Size . . . . . . . . . . . . . . . . . . 1/2 inch, FNPT
Solution Outlet Size . . . . . . . . . . . . . . . 2 inch, FNPT
Site Requirements:
Inlet Water . . . . . . . . . . . . . . . . . . . . . 1.2-9.0 gpm @ 5-80 psig
Operating Temperature . . . . . . . . . . . . 40º - 105º F
All Capacities