-
Haward Technology Middle East
IE1090 - Page 1 of 6 .
IE1090-12-19|Rev.01|07 August 2019
COURSE OVERVIEW IE1090
Practical CCTV Installation
Course TitlePractical CCTV Installation
Course Date/VenueDecember 08-12, 2019/Bateen MeetingRoom, Crowne
Plaza Abu Dhabi Hotel,Abu Dhabi, UAE
Course ReferenceIE1090
Course Duration/CreditsFive days/3.0 CEUs/30 PDHs
Course DescriptionThis hands-on, highly-interactive
courseincludes various practical sessions andexercises. Theory
learnt will be applied using“MS Office” applications.
This course is designed to provide participants adetailed and
up-to-date overview of practicalCCTV installation. It covers basic
elements ofCCTV system including the camera, monitor anddigital
recorder; camera types and uses which arefixed and movable, for
indoor and outdoor,monochrome and colour and for day and nightuse.
It also covers camera specifications thatdeals with sensitivity,
signal to noise ratio andresolution.
Further, the course will also discuss the differenttypes of lens
which are fixed and variable focallength, manual and motorized zoom
and describethe various types of cables and connectors, its
types,uses, limitations, preparation and testing. Thecourse will
also enhance the skills to carryout backfocus adjustment, use of
lens calculator, recordingfootage using analogue and digital video
recorders,time lapse recording and reviewing video
footage.Delegates will be able to successfully identify,diagnose
and rectify a wide range of CCTV faultswith confidence and
efficiency.
-
Haward Technology Middle East
IE1090 - Page 2 of 6 .
IE1090-12-19|Rev.01|07 August 2019
Course ObjectivesUpon the successful completion of this course,
each participant will be able to:-
Apply systematic techniques and skills on CCTV operating system
and report writing
Identify the fundamental elements that make up a CCTV system
Set-up camera, monitor, switches, quads, multiplexers and
recording devices
Connect-up and test system elements as well as recognize the
issues associated withlighting and scene illumination
Adjust the back focus of a lens to prevent picture going out of
focus from day to night
Determine the significance of the “operational requirement” and
the EN50132 testprotocols
Recognize the relevant standards and issues
Use a lens calculator to choose correct lens for particular
application
Discuss the changing technology and its impact on the
industry
Exclusive Smart Training Kit - H-STK®
Participants of this course will receive the exclusive
“HawardSmart Training Kit” (H-STK®). The H-STK® consists of
acomprehensive set of technical content which includes
electronicversion of the course materials, sample video clips of
theinstructor’s actual lectures & practical sessions during the
courseconveniently saved in a Tablet PC.
Who Should AttendThis course provides an overview of all
significant aspects and considerations of CCTVoperating system for
operation and maintenance staff who are involved in the
installation,commissioning and maintaining CCTV systems. The course
is specifically designed toenhance the competence of both technical
and non-technical personnel such asmanagers, superintendents,
engineers, heads of departments, team leaders and
unitsupervisors.
AccommodationAccommodation is not included in the course fees.
However, any accommodationrequired can be arranged at the time of
booking.
Training MethodologyThis interactive training course includes
the following training methodologies as apercentage of the total
tuition hours:-
30% Lectures20% Workshops & Work Presentations20% Case
Studies & Practical Exercises30% Videos, Software &
Simulators
In an unlikely event, the course instructor may modify the above
training methodologybefore or during the course for technical
reasons.
-
Haward Technology Middle East
IE1090 - Page 3 of 6 .
IE1090-12-19|Rev.01|07 August 2019
Course Certificate(s)Internationally recognized certificates
will be issued to all participants of the course.
Certificate AccreditationsCertificates are accredited by the
following international accreditation organizations: -
● USA International Association for Continuing Education and
Training (IACET)
Haward Technology is an Authorized Training Provider by the
InternationalAssociation for Continuing Education and Training
(IACET), 2201 Cooperative Way,Suite 600, Herndon, VA 20171, USA. In
obtaining this authority, HawardTechnology has demonstrated that it
complies with the ANSI/IACET 1-2013Standard which is widely
recognized as the standard of good practiceinternationally. As a
result of our Authorized Provider membership status,
HawardTechnology is authorized to offer IACET CEUs for its programs
that qualify underthe ANSI/IACET 1-2013 Standard.
Haward Technology’s courses meet the professional certification
and continuingeducation requirements for participants seeking
Continuing Education Units(CEUs) in accordance with the rules &
regulations of the International Associationfor Continuing
Education & Training (IACET). IACET is an international
authoritythat evaluates programs according to strict,
research-based criteria and guidelines.The CEU is an
internationally accepted uniform unit of measurement in
qualifiedcourses of continuing education.
Haward Technology Middle East will award 3.0 CEUs (Continuing
Education Units)or 30 PDHs (Professional Development Hours) for
participants who completed thetotal tuition hours of this program.
One CEU is equivalent to ten ProfessionalDevelopment Hours (PDHs)
or ten contact hours of the participation in andcompletion of
Haward Technology programs. A permanent record of a
participant’sinvolvement and awarding of CEU will be maintained by
Haward Technology.Haward Technology will provide a copy of the
participant’s CEU and PDH
Transcript of Records upon request.
● British Accreditation Council (BAC)
Haward Technology is accredited by the British Accreditation
Council forIndependent Further and Higher Education as an
International Centre. BAC isthe British accrediting body
responsible for setting standards within independentfurther and
higher education sector in the UK and overseas. As a
BAC-accreditedinternational centre, Haward Technology meets all of
the international highereducation criteria and standards set by
BAC.
Course FeeUS$ 5,500 per Delegate + 5% VAT. This rate includes
H-STK® (Haward Smart TrainingKit), buffet lunch, coffee/tea on
arrival, morning & afternoon of each day.
-
Haward Technology Middle East
IE1090 - Page 4 of 6 .
IE1090-12-19|Rev.01|07 August 2019
Course Instructor(s)This course will be conducted by the
following instructor(s). However, we have the right tochange the
course instructor(s) prior to the course date and inform
participantsaccordingly:
Dr. Mike Tay, PhD, MSc, BSc, is a Senior
Electrical,Instrumentation & Communications Engineer with over
35 years ofextensive experience. His expertise widely covers
Protection RelayMaintenance, Application & Testing, System
Analysis, PowerSystem Faults, Protection Scheme Components, Current
&Voltage Transformers, Power System Neutral Grounding,
Feeder
Overcurrent Protection, Electrical Protection Systems, Bus
Protection, MotorProtection, Starting & Control, Transformer
Protection, Generator Protection,Capacitor Protection, Numerical
Relays, SCADA Security, ESD System Analysis &Control,
Electrical & Instrumentation, Installation & Inspection,
CustodyMeasurement, Loss Control for Petroleum Products, Process
Control &Instrumentation, Fiber Optics Access Network Planning,
Safety InstrumentedSystem (SIS), Safety Integrity Level (SIL), PLC
Design, Power System, PowerSupply Design Management, Basic
Electronics & Transformers, Diesel Generator,Electric Motors,
Electrical Fundamentals, Basic Electricity & Electrical
Codes.Further, he is also well-versed in Communications,
Telecommunications, MobileProtocols, 4G LTE, GSM/UMTS, CMDA2000,
WIMAX Technology, HSPA+, AlarmManagement System, Computer
Architecture, Logic & Microprocessor Design,Embedded Systems
Design plus Computer Networking with CISCO, NetworkCommunication,
Industrial Digital Communication, DesigningTelecommunications
Distribution System, Electrical Engineering, WiMAXBroadband
Wireless System, TT Intranet & ADSL Network, TT Web &
Voicemail,Off-site ATM Network, IT Maintenance, Say2000i, IP Phone,
National Address & IDAutomation, Electricity Distribution
Network, Customs Network & Maintenance,LAN & WAN Network,
UYAP Network, Network Routing Protocols, MulticastProtocols,
Network Management Protocols, Mobile & Wireless Networks
andDigital Signal Processing. Currently, he is the Technical
Advisor of Izmir Altek.
During his career life, Dr. Tay worked with various companies
such as the KOCSistem, Meteksan Sistem, Altek BT, Yasar University,
Dokuz Eylul University,METU and occupied significant positions like
the Aegean Region Manager, GroupLeader, Technical Services Manager,
Field Engineer, Research Assistant,Instructor, Technical Advisor
and the Dr. Instructor.
Dr. Tay has PhD, Master and Bachelor degrees in Electrical &
ElectronicEngineering from the Dokuz Eylul University and the
Middle East TechnicalUniversity (METU) respectively. Further, he is
a Certified Instructor/Trainer,Technical Trainer (Australia),
Trainer for Data-Communication System (England &Canada), a
Certified Internal Verifier/Assessor/Trainer by the Institute
ofLeadership & Management (ILM), a Certified CISCO (CCSP, CCDA,
CCNP, CCNA,CCNP) Specialist, a Certified CISCO IP Telephony Design
Specialist, CISCO RichMedia Communications Specialist, CISCO
Security Solutions & Design Specialistand Information Systems
Security (INFOSEC) Professional. He has delivered andpresented
innumerable training courses and workshops worldwide.
-
Haward Technology Middle East
IE1090 - Page 5 of 6 .
IE1090-12-19|Rev.01|07 August 2019
Course ProgramThe following program is planned for this course.
However, the course instructor(s)may modify this program before or
during the course for technical reasons with no priornotice to
participants. Nevertheless, the course objectives will always be
met:
Day 1: Sunday, 08th of December 20190730 – 0800 Registration
& Coffee
0800 – 0815 Welcome & Introduction
0815 – 0830 PRE-TEST
0830 – 0930CCTV SystemsIntroduction & Uses
0930 – 0945 Break
0945 – 1030Elements of a Basic CCTV SystemCamera ● Monitor ●
Digital Recorder
1030 - 1230Camera Types & UsesFixed & Movable ● Indoor
& Outdoor ● Monochrome & Colour ● Day & Night
1230 – 1245 Break
1245 – 1420Camera SpecificationsSensitivity ● Signal to Noise
Ratio ● Resolution
1420 – 1430 Recap
1430 Lunch & End of Day One
Day 2: Monday, 09th of December 20190730 – 0930 Back Focus
Adjustment
0930 – 0945 Break
0945 – 1030Lens TypesFixed & Variable Focal Length ● Manual
& Motorised Zoom
1030 - 1230 Use of Lens Calculator
1230 – 1245 Break
1245 – 1420Scene IlluminationLighting Considerations ● LED’s ●
Infrared Lamp Maintenance ● Bulb Life
1420 – 1430 Recap
1430 Lunch & End of Day Two
Day 3: Tuesday, 10th of December 2019
0730 – 0930Switches, Quads, Multiplexers & Control
SystemsTypes & Applications
0930 – 0945 Break
0945 – 1030 Monitors & Multiple Screen Displays
1030 - 1230Recording the FootageAnalogue ● Digital Video
Recorders
1230 – 1245 Break
1245 – 1420Time-Lapse RecordingReviewing Video Footage
1420 – 1430 Recap
1430 Lunch & End of Day Three
-
Haward Technology Middle East
IE1090 - Page 6 of 6 .
IE1090-12-19|Rev.01|07 August 2019
Day 4: Wednesday, 11th of December 2019
0730 – 0930Cables & ConnectorsTypes ● Uses ● Limitations
0930 – 0945 Break
0945 – 1030Cables & Connectors (cont’d)Preparation ●
Testing
1030 - 1230 Introduction to Digital CCTV & IP Technology
1230 – 1245 Break
1245 – 1345 Connection to Other Security Systems
1420 – 1430 Recap
1430 Lunch & End of Day Four
Day 5: Thursday, 12th of December 2019
0730 – 0930Use of Test EquipmentMultimeters ● Oscilloscopes ●
Light Meters
0930 – 0945 Break
0945 – 1030Use of Test Equipment (cont’d)Pattern Generators ●
Cable Length Meters
1030 - 1230 Relevant Standards, Issues & the “Operational
Requirement”
1230 – 1245 Break
1245 – 1345The Analogue or Digital OptionChanging Technology
& Keeping Updated
1345 – 1400 Course Conclusion
1400 – 1415 POST-TEST
1415 – 1430 Presentation of Course Certificates
1430 Lunch & End of Course
Hands-on Practical SessionsThis hands-on, highly-interactive
course includes the following real-life case studies:-
Course CoordinatorCristy Mamisay, Tel: +971 2 309 1714, Fax:
+9712 309 1716, Email: [email protected]
