Harris MSA-100 Multi Source Analyzer TCE CABLE TOOLS › pdf › selenio_media... · 969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 [email protected]

SelenioÊ Media Convergence Platform

969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]

With the growing need in broadcast environments to support content from many newsources — and deliver it over many new mediums — there is an increasing demand toapply some of the networking efficiencies inherent in the IP domain.

Today’s customers recognize that IP infrastructure will eventually become the norm in thebroadcast facility as compression gets better, networks get larger and products get lessexpensive. While this shift will ultimately drive cost savings, the transition period willundoubtedly present challenges.

Selenio™ is a next-generation, modular solution that presents an all-new approach tonetworking and signal processing in this converging baseband/broadband arena. WithSelenio, Harris has introduced the industry’s first integrated media convergenceplatform.

An evolution in platform — a revolution in what you can do.Selenio combines traditional baseband video and audio processing, compression and IPnetworking features — all in a single, space-saving 3RU frame. This combination oftechnologies enables full-featured multichannel video and audio processing, distributionand compression applications at a size and density scale that is unprecedented in themarketplace.

To manage all that functionality? A built-in, highly intuitive, graphically rich, web-basedinterface using Microsoft® Silverlight® technology, which enables operators to get themost functionality from the new platform — without being buried under an avalanche ofmanuals and bespoke commands.

Now you can manage baseband and IP intelligently and efficiently. Reduce cabling andsimplify your broadcast infrastructure. Deftly juggle multiple compression standards,video/audio signals, encoding formats. Get all the functionality you need to run yourbusiness today — and a clear, cost-effective growth path to whatever is on your horizon.


IMAGES/DIAGRAMS

NEXIO Volt Integrated Storage Server

NEXIO Volt Shared Storage Server

NEXIO Volt Rear Panel View


FEATURES

▪ Combined IP and baseband sub-networks in a single platform▪ Video processing, advanced audio processing, compression and multiplexing in a single, flexible platform

with intuitive graphical management tools◦ Dual-channel baseband modules provide 28 channels of high-density baseband video

processing, including up-, down-, and cross-conversion and synchronization◦ Advanced audio processing capabilities, including integrated Dolby® E, Dolby® Digital,

AAC, AAC-HE, MPEG audio and DTS Neural Surround™ UpMix, DownMix and DTSNeural Loudness Control

◦ Audio and video multiplexing and demultiplexing for compressed streams◦ MPEG-2 and H.264 compression standards are supported from SD and HD to 3 Gb/s and

mobile▪ Support for up to 14 independent, single-slot modules with internal connectivity

◦ 3 Gb/s baseband connections to/from each module◦ 1 Gb/s data connection to/from each module◦ Independent control network to/from each module

▪ Integrated, seamless signal redundancy with full redundant configurations across processing, compressionand routing for critical broadcast paths

▪ Inputs/outputs include analog video/audio, SD-SDI, HD-SDI, AES audio (balanced, unbalanced), fiber optics,Ethernet for control and IP video, ASI and serial data

▪ Hot-swappable front and back modules, and controllers▪ Standard support for thumbnails, customizable alarms and MPEG-4 streaming▪ Two external reference genlock loops; high-performance passive loop-through inputs▪ Support for two hot-swappable, redundant power supplies — each independently able to handle the

complete frame power load (650 W)▪ Integral fan cooling with front-to-back primary airflow; designed to support full load at 40° C ambient with no

thermal stacking limitations▪ Direct Ethernet connectivity (1000Base-T for control/monitoring, 1000Base-T for data) to the frame with

optional redundancy▪ A variety of control methods to suit every operational environment: NUCLEUS™, CCS Navigator™, local

control panel, rich interface application (RIA) HTTP web browser or third-party control systems via publishedSNMP MIBs for application modules



• Two genlock reference looping inputs utilizing standard BNC connectors• Built-in, browser-based management system (no software required) that incorporates support for rich

interactive features through Microsoft® Silverlight®• A General Purpose Interface (GPI) — Two GPI inputs and outputs are provided on a multi-pin type

connector• Power Supply — Each frame includes one energy-efficient, 80 Plus Gold-certified power supply that

will power a fully loaded frameSelenio options include a second power supply and a second controller for redundancy, as well as alocal control panel.

N+1 RedundancyN+1 redundancy is supported in the Selenio frame. Redundancy is accomplished by using an externalrouter or a crosspoint on the Selenio controller module.

Redundancy is implemented through software provisioning (controller module, application module andcontrol system).

Without Selenio: Complex broadcast infrastructure and workflow

With Selenio: Significantly streamlined infrastructure and workflow

PRODUCT DETAILS

Every shipment of the Selenio frame includes the following:

• A controller for interface to control networks (with an option for data networks)

Genlock ReferenceThere are three means of utilizing the external reference:

1. Main and back-up color black (blackburst) or TLS (Tri-Level Sync) references2. Color black (blackburst) or TLS and DARS

(Digital Audio Reference Signal) for AES-11 compliance configurations

3. Two different reference signals – e.g., color black NTSC and (black burst) PAL – can be

applied to the frame, and each module capableof locking to an external reference can bechosen to lock to either reference

Application modules with a frame synchronizer function have an analog reference connection to the twoexternal reference inputs. Neither of these analog reference connections is broken if the controllermodule must be removed for servicing.

Application modules that require a digital reference — such as the encoder, decoder ormultiplexer/demultplexer — have a digital reference connection to each of the two controller modules.

Intuitive Web-based GUIFeaturing a built-in, browser-based management system (no software required) that incorporates supportfor rich interactive features through Microsoft® Silverlight®, Selenio provides a graphically rich interfacethat enables operators to get the most functionality from the new platform — without being buried underan avalanche of manuals and bespoke commands.

Operators can access the platform from their web browser and, using graphical block diagrams for eachparticular module, can easily step through the configuration process — significantly reducing the chanceof error.

HD-BNC ConnectorsSelenio application modules utilize high-density HD-BNC connectors for video and audio connectivity.The HD-BNC offers the same strength and is the same bayonet-locking connector as standard BNCconnectors.

HD-BNC connectors meet all SMPTE 292M and SMPTE 424M return loss specifications — and exceedsthem at 3 Gb/s. For high-density applications, a cable insertion/extraction tool is available, which is assimple to use as the standard BNC tool.




Back modules are easily connected to the frame utilizing alignment pins and captive machine screws.

Controller ModulesThe Selenio system redundant controller module provides control and management for the entiresystem. Functions include provisioning, status, fault management and supervisory control. IntegralSDI/ASI and Ethernet switching with external routing provides N+1 redundancy.

Each controller includes two 1000Base-T Ethernet interfaces. One interface provides an IP connectionfor system control and firmware upgrades, as well as for monitoring purposes. The second 1000Base-TEthernet interface is enabled for video and audio data applications with an optional plug-in sub-module,and may be provided with an RJ-45 or optional SFP fiber transceiver.

One controller is included with every frame and features two RJ-45 connections: one for control and onefor video networking applications (utilizing the optional video IP sub module). For optical connectivity invideo networking applications, an SFP transceiver option is available for the controller module. Asecondary controller can be provided with the appropriate connectivity at the time of order or easilyadded in the field.

Expansion ModulesInputs, outputs and functionality can be easily increased in Selenio application modules by simply addingvideo and audio expansion modules.

Video and audio signals are connected internally over bidirectional high-speed busses — eliminatingexternal cabling. When an expansion module is installed beside an application module, an automaticconnection takes place. The corresponding block diagram in the graphical user interface is updated,giving the user setup, control and monitoring functions.

One video expansion module can be placed beside a frame sync or video conversion applicationmodule. Five back-module options provide interfaces for electrical and optical inputs and outputs andrelay bypass for critical signals upon power loss.

For audio expansion, up to two analog audio expansion modules and/or digital audio expansion modulescan be placed beside a frame sync or video conversion application module. Audio expansion modulescan enable additional audio processing such as Dolby® codecs and DTS Neural Loudness Control.

When viewing the front of the frame, video expansion modules are added to the left of the applicationmodule (lower slot numbers). Audio expansion modules are added to the right of the application module(higher slot numbers).

Back Module Installation




IMAGES/DIAGRAMS

Web-based GUI

Media Convergence Platform Rear View

Selenio Controller Module





Input Voltage Rated 100 to 240 VAC

Operating 90 to 250 VAC

Frequency Rated 50 to 60 Hz

Operating 47 to 63 Hz

Input Current Rated 9A RMS maximum

Operating 8A RMS maximum at 90 VAC with 650 W output3A RMS maximum at 250 VAC with 650 W output

Inrush Current 40A peak maximum @ high line, hot or cold start, duration not to exceed 10 ms

Efficiency The PSU will deliver an efficiency of no less than 86% at any net power levelgreater than 25% of rated output

Power Factor >0.95 at output power >50% load @ 250 VAC input>0.95 at output power >30% load @ 90 VAC input >0.97 at 90 to 135 VAC and >0.95 at 180 to 250 VAC, typical

Harmonic Distortion Complies with the requirements of EN61000-3-2

External Reference - Genlock

Connector BNC (IEC169-8)

Impedance 75 ohms

Return Loss >40 dB 25 Hz to 10 MHz (SMPTE 318M-1999)

Common Mode Range 5.5 V pk-pk

CMRR 60 dB @ 60 Hz, 5 V pk-pk

Input Level NTSC/PAL-B: 1 V pk-pk, –6.0 dB to +6.0 dBTri-level sync: ±300 mV, –6.0 dB to +6.0 dBDARS: 1 V pk-pk

Controller Module ReferenceStandards

525i/59.94, 625i/50, 720p/25, 720p/29.97, 720p/30, 720p/50, 720p/59.94, 720p/60,1080i/50, 1080i/59.94, 1080i/60, 1080sF/23.98, 1080sF/24, 1080sF/25,1080sF/29.97, 1080sF/30, 1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97,1080p/30

Standard SMPTE 170M (NTSC), ITU-R BT.470-6 (PAL-B), SMPTE 274M (1080i, 1080p),SMPTE 296M (720p), AES3 SMPTE 276M

Ethernet

Connector RJ-45

Standard 10/100/1000Base-T (10/100Base-T on front Ethernet port)

Differential Output Voltage 0.75 V ±0.83 dB

High Frequency Jitter 0.3 ns

CMRR 1V RMS 1 to 250 MHz

Clock Frequency 125 MHz ±0.01%

Power Supply

SPECIFICATIONS


Type LC

Average Output Power (minimum) -9 dBm

Average Output Power (maximum) -3 dBm

Mean Optical Wavelength 1270 to 1355 nm; 10 km range

Input Power (minimum) -20 dBm

Input Power (maximum) -3 dBm

Laser Mode Single-mode, 1310 nm FP laser

Supply voltage 3.135 to 3.465 V

Ejector Bail actuator operating case

Temperature -40º to 185º F (-40º to 85º C)

Gigabit Optical Multi-Mode (OP+SFP1+TRM) Laser

Output Power (minimum) -9.5 dBm

Output Power (maximum) -2 dBm

Output Center Wavelength 830 to 860 nm; 850 nm (typical)

Input Power (minimum) -17 dBm

Input Power (maximum) 0 dBm

Optical Input Wavelength 770 to 860 nm

Line Rate 1.25/1.0625 Gbaud

Laser Mode Multi-mode, 850 nm VCSEL

Voltage 3.3 V

Ejector Bail actuator operating case

Operating Case Temperature 23° to 176° F (-5° to 80°C)

Applicable Standards IEEE 802.3z 1000 Base SX specification for optical links

GPI In/Out

Connector 2 x 3 position screw terminal (Keystone 8739)

Input Signal Level +5 V

Output Signal Level ±75 V with reference to GPI out common

Physical Characteristics

Form Factor 3RU

Dimensions (H x W x D) 5.25 x 19 x 20.8 in. (13.3 x 48.3 x 52.8 cm)(Depth includes 0.7 in (1.8 cm) of optional SFP module and transceiver)

Power Consumption No modules installed 90 W maximum14 modules installed 650 W maximum

SFP

Gigabit Optical Single-Mode (OP+SFP+SEL) Laser




ORDERING INFORMATION

Mounting FrameSEL-FR3-AC-RR Selenio 3RU Frame: 1 AC PSU, 2 external reference looping BNC inputs, 1

controller (1 RJ45 for control/monitoring, 1 RJ45 for data (video IP sub modulerequired)), no control panel

SEL-FR3-AC-RR-R Selenio 3RU Frame: 2 AC PSU, 2 external reference looping BNC inputs, 2controllers (1 RJ45 for control/monitoring, 1 RJ45 for data (video IP sub modulerequired)), no control panel

SEL-FR3-AC-RR-IP Selenio 3RU Frame: 1 AC PSU, 2 external reference looping BNC inputs, 1controller (1 RJ45 for control/monitoring, 1 RJ45 for data (video IP sub moduleincluded)), includes control panel

SEL-FR3-AC-RR-IP-R Selenio 3RU Frame: 2 AC PSU, 2 external reference looping BNC inputs, 2controllers (1 RJ45 for control/monitoring, 1 RJ45 for data (video IP sub moduleincluded)), includes control panel

SEL-FR3-AC-RO-IP Selenio 3RU Frame: 1 AC PSU, 2 external reference looping BNC inputs, 1controller (1 RJ45 for control/monitoring, 1 optical transceiver for data (video IP submodule included)), SFP transceiver ordered separately, includes control panel

SEL-FR3-AC-RO-IP-R Selenio 3RU Frame: 2 AC PSU, 2 external reference looping BNC inputs, 2controllers (1 RJ45 for control/monitoring, 1 optical transceiver for data (video IPsub module included)), SFP transceiver ordered separately, includes control panel

Mounting Frame Options

SELOPT-LCP Optional local control panel

SELOPT-PSU-AC Optional AC power supply module

SELOPT-CTR Controller module (no back connections or video IP submodule included)

SELOPT-CTR-RR Optional controller module with one RJ45 for control and monitoring and one RJ45for data (video IP submodule required)

SELOPT-CTR-RR-IP Optional controller module with one RJ45 for control and monitoring and one RJ45for data (video IP), video IP submodule included



SELOPT-CTR-RO-IP Optional controller module with one RJ45 for control and monitoring and oneoptical transceiver for data (video IP sub module included), SFP orderedseparately

SELOPT-VIDEO-IP Optional video IP submodule for controller module

SELOPT-RR Optional dual RJ45 connections for controller module

SELOPT-RO Optional single RJ45, single optical transceiver connections for controller module(SFP tranceiver ordered separately)

SELOPT-FAN Spare fan

SFP Tranceiver Option for Data

OP+SFP1+TRM Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products. Multi-modetransceiver. Up to 1 Gb/s bandwidth capable for Datacom/Telecom or TDMSolutions

OP+SFP+SEL Small Form Factor Pluggable (SFP) for Selenio frame Controller only. Single Modetransceiver. Up to 1 Gb/s bandwidth IEEE 802.3 part 4 compliant

164-100113Q00 Spare blank back module

SELOPT-TOOL-CABLE HD-BNC insertion/extraction tool

SELOPTCAB-HD-BNC-V HD-BNC video adapter cable

SELOPTCAB-HD-BNC-A HD-BNC audio adapter cable



ServicePAKS

SEL-QS 1-day Quickstart Commissioning for Selenio to be performed by a Certified SelenioTechnician (includes travel time, travel and expenses)

SEL-QS-NT 1-day QuickStart Commissioning for Selenio to be performed by a Certified SelenioTechnician (excludes travel time, travel and expenses)

SEL-GL 1-day Go Live Support for Selenio to be performed by a Certified SelenioTechnician (includes travel time, travel and expenses)

SEL-GL-NT 1-day Go Live Support for Selenio to be performed by a Certified SelenioTechnician (excludes travel time, travel and expenses)

SEL-FR3-BASIC 1-year BASIC ServicePAK for Selenio SEL-FR3-AC-RR (frame, power supplies,controllers)

SEL-FR3-GOLD 1-year GOLD ServicePAK for Selenio SEL-FR3-AC-RR (frame, power supplies,controllers)

SEL-FR3-IP-BASIC 1-year BASIC ServicePAK for Selenio SEL-FR3-AC-RR-IP or SEL-FR3-AC-RO-IP(frame, power supplies, controllers, video IP submodules)

SEL-FR3-IP-GOLD 1-year GOLD ServicePAK for Selenio SEL-FR3-AC-RR-IP or SEL-FR3-AC-RO-IP

SEL-PSU-BASIC 1-year BASIC ServicePAK for Selenio power Supply

SEL-PSU-GOLD 1-year GOLD ServicePAK for Selenio power Supply

SEL-LCP-BASIC 1-year BASIC ServicePAK for Selenio local control panel

SEL-LCP-GOLD 1-year GOLD ServicePAK for Selenio local control panel

SEL-CTR-BASIC 1-year BASIC ServicePAK for Selenio SELOPT-CTR-RR controller

SEL-CTR-GOLD 1-year GOLD ServicePAK for Selenio SELOPT-CTR-RR controller

SEL-CTR-IP-BASIC 1-year BASIC ServicePAK for Selenio SELOPT-CTR-RR-IP andSELOPT-CTR-RO-IP controllers

SEL-CTR-IP-GOLD 1-year GOLD ServicePAK for Selenio SELOPT-CTR-RR-IP andSELOPT-CTR-RO-IP controllers

Specifications Subject To Change Without Notice Rev 11-12 ©Toner Cable Equipment, Inc.

Documents

Harris MSA-100 Multi Source Analyzer TCE CABLE TOOLS › pdf › selenio_media... · 969 Horsham Road lHorsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 [email protected]