GS-Series turning centers are rigid andreliable machines that feature a robustone-piece cast iron base, heavy-dutylinear guideways and ballscrews, and manystandard value-added features—heavy-dutydual-wound spindle motor, 40-psi throughtooland headwall coolant, foot switch, chipconveyor interface, air hose with air gun, aswing-out CNC control panel for ease ofoperation, and much more.
www.hardinge.comTURNINGHARDINGE GS-SeriesPerformance Turning
Centers2GS-Series turning centers are rigid and reliable machines
that feature a robust one-piece cast iron base, heavy-duty linear
guideways and ballscrews, and many standard value-added
featuresheavy-duty dual-wound spindle motor, 40-psi through-tool
and headwall coolant, foot switch, chip conveyor interface, air
hose with air gun, a swing-out CNC control panel for ease of
operation, and much more. Oi-TD CNC controls include many
value-added features that are offered as options by other ma-chine
builders. Choose from the numerous productivity options and youll
have a truly versatile machineand with the level of quality you
would expect with any Hardinge product.Exceptional combination
offeatures for speed, power,accuracy, and durability ina compact
design andaffordable priceGS-Series Performance Turning Centers-
A2-5 spindle nose- 11-kW (15-hp) spindle drive system- 175Nm
(126.5ft-lb) torque- 6,000-rpm spindle speed - 150mm (6) jaw chuck
standardGS 150- A2-6 spindle nose- 11-kW (15-hp) spindle drive
system- 210Nm (154ft-lb) torque - 5,000-rpm spindle speed - 200mm
(8) jaw chuck standardGS 200GS 42- A2-5, 16C spindle nose- 11-kW
(15-hp) spindle drive system- 175Nm (126.5ft-lb) torque- 6,000-rpm
spindle speed - 42mm (1.65) bar capacityGS 51- A2-6, 20C spindle
nose- 11-kW (15-hp) spindle drive system- 210Nm (154ft-lb) torque -
5,000-rpm spindle speed - 51mm (2) bar capacityGS 200/66 and GS
200/66 LGS 250 and GS 250 L GS 65- A2-6 spindle nose- 18.5-kW
(25-hp) spindle drive system - 504Nm (371.4ft-lb) torque- 4,200-rpm
spindle speed - 200mm (8) jaw chuck standard- A2-8 spindle nose-
18.5-kW (25-hp) spindle drive system - 605Nm (445.6ft-lb) torque-
3,500-rpm spindle speed - 250mm (10) jaw chuck standard- A2-6 / 25C
Spindle Nose- 18.5-kW (25-hp) spindle drive system- 504Nm
(371.4ft-lb) torque- 4,200-rpm spindle speed - 65mm (2.55)Compact
and Large Frame- Collet seats directly in the Hardinge spindle-
Minimum overhang from the spindle bearingsassures that spindle
accuracy is transferreddirectly to the workpiece- Maximum rigidity
and gripping power istransferred to the part- Minimum weight on
spindle- Maximum utilization of RPM- Optimum T.I.R.- Gripping force
directly over the workpiece- Superior tolerances and fnishes-
Capable of using maximum machine strokecapacity- Quick changeover
collet draw tube is easilyand accurately adjusted from the back of
thespindle- Longer tool life- Ability to use a wide variety of
workholding devices:Sure-Grip 3-jaw chucks, collets, FlexC
quick-change collets, step chucks, Sure Grip expanding collets,
Dead-Length systems, fxture plates and othersHardinge Spindleshown
with ColletHardinge Spindleshown with 3-Jaw ChuckThe Hardinge
spindle designallows quick changeover frombar work to chucking
work!The Hardinge spindle design is both collet and jaw chuck-ready
and does NOT require a spindle adapter. Colletready spindle only
available on GS 42, 51 & 65 models.Minimal distance from
spindle bearings to tool tipCOLLET-READYSPINDLE DESIGNCOLLET
ADAPTERCONFIGURATIONExcessive overhang from spindle ColletColletBar
runoutCollet adapterGrip on bar stockThe Hardinge AdvantageMinimal
distance from spindle bearings to tool tipCOLLET-READYSPINDLE
DESIGNCOLLET ADAPTERCONFIGURATIONExcessive overhang from spindle
ColletColletBar runoutCollet adapterGrip on bar stock3Industrys
most reliable motors and drives.Heavy-duty axis motors and drives
provide superior machine capability. Non-contact magnetic spindle
encoder eliminates the need for belted encoder, increasing overall
reliability. One-degree spindle orient included.Best-in-class
spindle design incorporates 2-roller and 2-angular contact bearing
for superior rigidity, thermalstability and overall spindle
life.Machine base and all major castings are made with high quality
grey cast iron for superior rigidity, durability, and thermal
stability.Dual-wound spindle motor provides heavy-duty cutting
capabilities.Fully-programmable #4 MT hydraulic tailstock option
eliminates human intervention compared to competitive
designs.Environmentally friendly grease lubrication minimizes
overall maintenance cost. High class double-nut ball screws provide
superior machine accuracy andrepeatability.Strategically ribbed
45-degree slant bed design of one piece construction.High quality
linear roller guideways provide greater positioning accuracy,
faster traverse rates, less machine wear, longer machine life and
overall machining consistency.GS 200/66(L), GS 250(L) and GS 65 GS
150, GS 200, GS 42 & GS 51Heavy-duty linear roller guideways
provide optimum stiffness and rigidity, resulting in heavier
cutting capability and longer machine life.Fully-programmable #5 MT
hydraulic tailstock option features robust boxway design for
optimum tailstock rigidity.All of the features and benefts listed
above that are not called out below also apply to the GS 150 and GS
200 models.Strategically ribbed30-degree slant bed design of one
piece construction.Heavy-duty, fxed pre-tensioned double-nut
C2-class ballscrews provide superior rigidity, machineaccuracy and
repeatability.All machines are laser inspeced to strict quality
standards.12-Station vertical block top plate standardVDI top plate
withlive tooling is available as an option.Standard features
include: 3-Jaw wedge-style chuck (N/A GS 42/51) One-degree spindle
orient Spindle reference (servo lock) Rigid tapping Run time and
parts counter Chuck/collet closer foot switch Chip conveyor
Interface Swing-out CNC pendant Air hose with air gun Complete
operators, programmers and maintenance documentation Machine
Construction412-Station vertical block top plate standardVDI top
plate with or without live tooling is available as an option. *BMT
for GS65A BCDEFG : GS 42H : GS 51 I : GS 150J : GS 200K : GS
200/66L : GS 250Minimal tool interference Bidirectional turret
indexing allows shortest path indexing for reduced non-cut time.The
non-lift turret indexing ensures con-taminant-free
operationindexing is by a brushless servomotor with positive
hydraulic clamping on a 3-piece curvic coupling.The turret pivot
(safety shear) feature helps prevent damage to the machine. Coolant
is fed through round shank tool holders via turret ports, allowing
coolant to be precisely directed to the machining operation.Live
tooling is not available.Rigid tapping Synchronization between the
main spindle and the Z-axis motion provides precise and fast rigid
tapping operations.Standard 12-station vertical block top plate GS
150, GS 200, GS 42, and GS 51 GS 200/66, GS 250 and GS
65454mm(17.87)Minimal tool interference12-Station Vertical Top
Plate5Large machining area GS 42 and GS 51A112.5mm (4.429)B456.0mm
(17.952)C10.0mm (0.394)D152.0mm (5.984)E11.0mm (0.433)F341.0mm
(13.425) G117.3mm (4.618)H117.3mm (4.618) GS 150 and GS 200A162.5mm
(6.398)B406.0mm (15.984)C10.0mm (0.394)D152.0mm (5.984) E11.0mm
(0.433)F341.0mm (13.425) I182.5mm (7.185)J222.5mm (8.169) GS 200/66
and GS 250A188.5mm (7.421)B600.0mm (23.622)C10.0mm (0.394)D210.5mm
(8.287) E16.0mm (0.630)F625.0mm (24.606) K222.5mm (8.759)L231.5mm
(9.114) GS 200/66L and GS 250L A188.5mm (7.421)B1050.0mm (41.338)
C10.0mm (0.394)D210.5mm (8.287) E16.0mm (0.630)F625.0mm (24.606)
K222.5mm (8.759)L231.5mm (9.114)*plus 120mm(4.724) quill storkeA
BCDEFG : GS 42H : GS 51 I : GS 150J : GS 200K : GS 200/66L : GS
250VDI Top PlateVDI top plate live tooling optionBidirectional
indexing of the 12-station VDI-30 turret top plate (VDI-40 on GS
200/66 and GS 250 models) allows shortest path indexing for reduced
non-cut time.Easier processing of part families and fewer setups
are realized due to the fact there are a large number of tool
stations. Fast setup times are possible by using quick-change VDI
tool holders. The non-lift turret index-ing ensures
contaminant-free operationindexing is by a brushless servomotor
with positive hydraulic clamping on a 3-piece curvic coupling.The
turret pivot (safety shear) feature helps prevent damage to the
machine. Coolant is fed through tool holders via turret ports. This
allows the operator to direct coolant precisely to the machining
operation, providing enhanced cutting and chip management. Live
tooling is available as an option. Rigid tapping is included. GS
150 and GS 200 shownStatic VDI top plate is a full lead time
option.Minimal tool interferenceThe illustrations represent the
maximum part diameters that can clear adjacent tool holders. A
balanced weight distribution of tooling on the top plate is
recommended.GS 150, GS 200, GS 42, and GS 51GS 200/66, GS
250Optional VDI top plate6Large machining areaGS 42 and GS
51A112.5mm (4.429)B456.0mm (17.952)C10.0mm (0.394)D152.0mm
(5.984)E76.0mm (2.992)F341.0mm (13.425)G117.3mm (4.618)H117.3mm
(4.618)GS 150 and GS 200A162.5mm (6.398)B406.0mm (15.984) C10.0mm
(0.394)D152.0mm (5.984) E76.0mm (2.992)F341.0mm (13.425) I 182.5mm
(7.185)J222.5mm (8.169) GS 200/66 and GS 250 A181.5mm
(7.145)B600.0mm (23.622) C10.0mm (0.394)D188.0mm (7.401) E93.5mm
(3.681)F625.0mm (24.606) K222.5mm (8.759)L231.5mm (9.114)GS 200/66L
and GS 250L A181.5mm (7.145)B1050.0mm (41.338)C10.0mm
(0.394)D188.0mm (7.401) E93.5mm (3.681)F625.0mm (24.606) K222.5mm
(8.759)L231.5mm (9.114)
*plus 120mm(4.724) quill stroke*BMT top plate used on GS65 with
live toolingParts catchers The catcher options allow the operator
to conveniently retrieve fnished work-pieces from outside the
machining area during the machining cycle.A slide-type catcher is
offered on GS 150 and GS200 machines.Arm-type is offered onall GS
models. Automatic tool touch probeThe retractable probe arm
provides quick setup and easy use, enabling automaticinsertion of
tool offsets.The four-direction probe makes it possible to touch
off both internal and external working tools.The machine can also
be programmed toautomatically touch off tools and be used for
in-cycle tool wear and breakagedetection. The probe arm swings up
to storage position on the headwall.Thermal Stabilization
PackageIncludes a spindle chiller, circulation fan and, X &
Z-axis scales. This option will improve the overal thermal
stabilityand minimize the warm up period. This productivity option
makes the machine more thermally stable, requiring lesshuman
intervention for offset changes during the warm up period. Only
available on the GS 42, 51, 150, and 200. Robust hydraulic
tailstocksThe fully-programmable tailstock options offer a robust
design for greater stability when machining long components between
centers, allowing closer tolerances, bettersurface fnishes and
higher speeds and feeds. It is hydraulically positioned
andautomatically controlled by the part program or manually
pressure regu-lated via the control panel.GS 150 and GS 200
machines feature a MT #4 tailstock on with 3470N (780lb) thrust
rating.GS 200/66, GS 250 and GS 65 machines feature a MT #5
tailstock with 9354N (2103lb) thrust rating.A 5.5m/min (216ipm)
maximum feedrate is featured on all machine models.Steady rest The
steady rest is available on GS 200/66(L), GS 250(L) and GS 65 long
bed models to support long cylindrical parts, allowing heavier cuts
and reduced tooling chatter while maintaining precision tolerances
and surface fnishes. Other optional features:- Chip Conveyor -VDI
Turret Tooling - Manual VDI Tool Presetter System- Bar Feed
Systems- Power Transformers- Stack light- Mist collectorLive
tooling/C-Axis contouringThe 5,000-rpm live tooling option
(4,000-rpm on GS 200/66 and GS 250 models) eliminates the need for
manysecondary milling machine operations,reducing additional part
handling andsetup cost.All stations of the top plate are live-tool
ready with only one station actively driven at one time.
Separateservomotors are used for turret index-ing and live tool
operations.A disc-type hydraulic spindle brake provides positive
locking during static machining operations.C-axis provides
positioning in increments of .001 degree. Three-dimensional
contouring, complex round and prismatic machining, square shoulder
and lettering are accomplished by synchronizing the spindle with
the X and Z axes. Rigid tapping can be done with both cross-and
end-working functions.20-Bar (280-psi) thru-tool coolantThis high
capacity coolant option provides direct fow of cooant to the active
tool cutting operation, providing enhanced chip management, higher
permissible feeds and speeds, cooler machining conditions for
longer tool life and optimum surface fnishes.Part probeThe part
probe with macros allows in-process workpiece size verifcationsand
automatic CNC adjustment of workoffsets. The probe is capable of
performing rapid frst-off inspection, in-process reporting and
allows lights out machining.Slide-typeGS 150, GS 200Arm-typeGS 42,
GS 51 GS 200/66, GS 250 and GS 65GS 200/66(L), GS 250(L), GS
65Productivity options for enhanced machining performanceMachine
Options78TorquePower TORQUE POWERNm kWSPINDLE OUTPUT
POWER/TORQUE1000 200 300
40050060070080010020030040050060070015182118.536912RPM11360490604.6875292TorquePowerTORQUE
POWERNm kWTorquePowerTORQUE POWERNm kWSPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUE1000 200300
400500600700800100200300400600151818.536912RPM11409504105035090010001192401000
80054000
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW2461250114.420641711915
min, S3 15%5 min operating zone1000 8005400
0200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW246120017295.4500
5101500 6102000 0 3000 4000 6000 50007.5CONTINUOUS30 min, S3
60%75095.415 min, S3
40%920911114.5TorquePowerRPMTORQUEPOWER6020408062481090NmkW12
12011930 min, S3 60%15 min, S3 40% 114.6137.45000 4000 30007.57670
625 2000CONTINUOUSTorquePowerRPM20406080100TORQUE POWERNm kW246120
1214350 0 700 3150 2100 1400 1050 1750
24502800RPM3500438404360327280240200 1012141618.5CONTINUOUS30min,S3
60%15min,S3 15%TorquePowerTORQUE POWERNm kW40801201602468
Hardinge/Fanuc i-Series GSLow WindingSiemens 810DHardinge/Fanuc
i-Series GSHigh Winding15 min, S3 15%5 min operating
zoneCONTINUOUS15 min, S3 15%10 min operating zoneCONTINUOUS15 min,
S3 15%10 min operating zone18.5161410120RPM336.5240200280360525 840
1260 1680 2520 2100 2940 3780 3360 420015min,S3 15%30min,S3
60%CONTINUOUSTorquePowerTORQUEPOWERNmkW40801201602468Spindle
speed(6000rpm)FANUC Spindle Motor FANUC Spindle MotorSpindle
speed(5000rpm)FANUCSpindle MotorFANUC Spindle MotorSpindle speed
(4200rpm)Spindle speed (3500rpm)Spindle speed(1500rpm)Spindle
speed(1250rpm) Spindle speed (1050rpm)Spindle speed (875rpm)Spindle
speed(6000rpm) Spindle speed(5000rpm) Spindle speed
(4200rpm)SIEMENS Spindle Motor SIEMENS Spindle Motor SIEMENS
Spindle Motor SIEMENS Spindle MotorSpindle speed (3500rpm)GS 150 GS
200 GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200
GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200 GS
200/66 & GS 200/66-L GS 250 & GS 250-LTorquePowerTORQUE
POWERNm kWTorquePowerTORQUES6-40%S6-60%S1S6-40%S6-60%S1POWERNm
kWFANUC Spindle MotorFANUC Spindle MotorFANUC Spindle MotorFANUC
Spindle Motor1241101049085.970503010103.41109086.771.65030104000
3000 12000500RPM5000 6000 20003000 2000 500
0343.8360320240286.522920018016014010060200RPM5000 5000 10002000
1500 500RPM2500 3000
350040004200100013117315913117315918161286421014TorquePowerTORQUE
POWERNm
kWS6-40%S6-60%S1343.8360320240286.5229200180160140100602002000 1500
500RPM2500 3000 3500 100018161286421014S6-40%S6-60%S1GS-Series
Performance Turning Centers Powerful spindle drivesHardinge/Fanuc
High WindingTorquePower TORQUE POWERNm kWSPINDLE OUTPUT
POWER/TORQUE1000 200 300
40050060070080010020030040050060070015182118.536912RPM11360490604.6875292TorquePowerTORQUE
POWERNm kWTorquePowerTORQUE POWERNm kWSPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUE1000 200300
400500600700800100200300400600151818.536912RPM11409504105035090010001192401000
80054000
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW2461250114.420641711915
min, S3 15%5 min operating zone1000 8005400
0200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW246120017295.4500
5101500 6102000 0 3000 4000 6000 50007.5CONTINUOUS30 min, S3
60%75095.415 min, S3
40%920911114.5TorquePowerRPMTORQUEPOWER6020408062481090NmkW12
12011930 min, S3 60%15 min, S3 40% 114.6137.45000 4000 30007.57670
625 2000CONTINUOUSTorquePowerRPM20406080100TORQUE POWERNm kW246120
1214350 0 700 3150 2100 1400 1050 1750
24502800RPM3500438404360327280240200 1012141618.5CONTINUOUS30min,S3
60%15min,S3 15%TorquePowerTORQUE POWERNm kW40801201602468
Hardinge/Fanuc i-Series GSLow WindingSiemens 810DHardinge/Fanuc
i-Series GSHigh Winding15 min, S3 15%5 min operating
zoneCONTINUOUS15 min, S3 15%10 min operating zoneCONTINUOUS15 min,
S3 15%10 min operating zone18.5161410120RPM336.5240200280360525 840
1260 1680 2520 2100 2940 3780 3360 420015min,S3 15%30min,S3
60%CONTINUOUSTorquePowerTORQUEPOWERNmkW40801201602468Spindle
speed(6000rpm)FANUC Spindle Motor FANUC Spindle MotorSpindle
speed(5000rpm)FANUCSpindle MotorFANUC Spindle MotorSpindle speed
(4200rpm)Spindle speed (3500rpm)Spindle speed(1500rpm)Spindle
speed(1250rpm) Spindle speed (1050rpm)Spindle speed (875rpm)Spindle
speed(6000rpm) Spindle speed(5000rpm) Spindle speed
(4200rpm)SIEMENS Spindle Motor SIEMENS Spindle Motor SIEMENS
Spindle Motor SIEMENS Spindle MotorSpindle speed (3500rpm)GS 150 GS
200 GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200
GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200 GS
200/66 & GS 200/66-L GS 250 & GS 250-LTorquePowerTORQUE
POWERNm kWTorquePowerTORQUES6-40%S6-60%S1S6-40%S6-60%S1POWERNm
kWFANUC Spindle MotorFANUC Spindle MotorFANUC Spindle MotorFANUC
Spindle Motor1241101049085.970503010103.41109086.771.65030104000
3000 12000500RPM5000 6000 20003000 2000 500
0343.8360320240286.522920018016014010060200RPM5000 5000 10002000
1500 500RPM2500 3000
350040004200100013117315913117315918161286421014TorquePowerTORQUE
POWERNm
kWS6-40%S6-60%S1343.8360320240286.5229200180160140100602002000 1500
500RPM2500 3000 3500 100018161286421014S6-40%S6-60%S1TorquePower
TORQUE POWERNm kWSPINDLE OUTPUT POWER/TORQUE1000 200 300 400 500
600 700
80010020030040050060070015182118.536912RPM11360490604.6875292TorquePowerTORQUE
POWERNm kWTorquePowerTORQUE POWERNm kWSPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUE1000 200300
400500600700800100200300400600151818.536912RPM11409504105035090010001192401000
80054000
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW2461250114.420641711915
min, S3 15%5 min operating zone1000 8005400 0
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW246120017295.4500
5101500 6102000 0 3000 4000 6000 50007.5CONTINUOUS30 min, S3
60%75095.415 min, S3
40%920911114.5TorquePowerRPMTORQUEPOWER6020408062481090NmkW12
12011930 min, S3 60%15 min, S3 40% 114.6137.45000 4000 30007.57670
625 2000CONTINUOUSTorquePowerRPM20406080100TORQUE POWERNm kW246120
1214350 0 700 3150 2100 1400 1050 1750
24502800RPM3500438404360327280240200 1012141618.5CONTINUOUS30min,S3
60%15min,S3 15%TorquePowerTORQUE POWERNm kW40801201602468
Hardinge/Fanuc i-Series GSLow WindingSiemens 810DHardinge/Fanuc
i-Series GSHigh Winding15 min, S3 15%5 min operating
zoneCONTINUOUS15 min, S3 15%10 min operating zoneCONTINUOUS15 min,
S3 15%10 min operating zone18.5161410120RPM336.5240200280360525 840
1260 1680 2520 2100 2940 3780 3360 420015min,S3 15%30min,S3
60%CONTINUOUSTorquePowerTORQUEPOWERNmkW40801201602468Spindle
speed(6000rpm)FANUC Spindle Motor FANUC Spindle MotorSpindle
speed(5000rpm)FANUC Spindle MotorFANUC Spindle MotorSpindle speed
(4200rpm)Spindle speed (3500rpm)Spindle speed(1500rpm)Spindle
speed(1250rpm) Spindle speed (1050rpm)Spindle speed (875rpm)Spindle
speed(6000rpm) Spindle speed(5000rpm) Spindle speed
(4200rpm)SIEMENS Spindle Motor SIEMENS Spindle Motor SIEMENS
Spindle Motor SIEMENS Spindle MotorSpindle speed (3500rpm)GS 150 GS
200 GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200
GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200 GS
200/66 & GS 200/66-L GS 250 & GS 250-LTorquePowerTORQUE
POWERNm kWTorquePowerTORQUES6-40%S6-60%S1S6-40%S6-60%S1POWERNm
kWFANUC Spindle MotorFANUC Spindle MotorFANUC Spindle MotorFANUC
Spindle Motor1241101049085.970503010103.41109086.771.65030104000
3000 12000500RPM5000 6000 20003000 2000 500
0343.8360320240286.522920018016014010060200RPM5000 5000 10002000
1500 500RPM2500 3000
350040004200100013117315913117315918161286421014TorquePowerTORQUE
POWERNm
kWS6-40%S6-60%S1343.8360320240286.5229200180160140100602002000 1500
500RPM2500 3000 3500 100018161286421014S6-40%S6-60%S1GS 150/42 GS
200/51 GS 200/66(L) & GS 65TorquePower TORQUE POWERNm kWSPINDLE
OUTPUT POWER/TORQUE1000 200 300
40050060070080010020030040050060070015182118.536912RPM11360490604.6875292TorquePowerTORQUE
POWERNm kWTorquePowerTORQUE POWERNm kWSPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUE1000 200300
400500600700800100200300400600151818.536912RPM11409504105035090010001192401000
80054000
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW2461250114.420641711915
min, S3 15%5 min operating zone1000 8005400
0200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW246120017295.4500
5101500 6102000 0 3000 4000 6000 50007.5CONTINUOUS30 min, S3
60%75095.415 min, S3
40%920911114.5TorquePowerRPMTORQUEPOWER6020408062481090NmkW12
12011930 min, S3 60%15 min, S3 40% 114.6137.45000 4000 30007.57670
625 2000CONTINUOUSTorquePowerRPM20406080100TORQUE POWERNm kW246120
1214350 0 700 3150 2100 1400 1050 1750
24502800RPM3500438404360327280240200 1012141618.5CONTINUOUS30min,S3
60%15min,S3 15%TorquePowerTORQUE POWERNm kW40801201602468
Hardinge/Fanuc i-Series GSLow WindingSiemens 810DHardinge/Fanuc
i-Series GSHigh Winding15 min, S3 15%5 min operating
zoneCONTINUOUS15 min, S3 15%10 min operating zoneCONTINUOUS15 min,
S3 15%10 min operating zone18.5161410120RPM336.5240200280360525 840
1260 1680 2520 2100 2940 3780 3360 420015min,S3 15%30min,S3
60%CONTINUOUSTorquePowerTORQUEPOWERNmkW40801201602468Spindle
speed(6000rpm)FANUC Spindle Motor FANUC Spindle MotorSpindle
speed(5000rpm)FANUCSpindle MotorFANUC Spindle MotorSpindle speed
(4200rpm)Spindle speed (3500rpm)Spindle speed(1500rpm)Spindle
speed(1250rpm) Spindle speed (1050rpm)Spindle speed (875rpm)Spindle
speed(6000rpm) Spindle speed(5000rpm) Spindle speed
(4200rpm)SIEMENS Spindle Motor SIEMENS Spindle Motor SIEMENS
Spindle Motor SIEMENS Spindle MotorSpindle speed (3500rpm)GS 150 GS
200 GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200
GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200 GS
200/66 & GS 200/66-L GS 250 & GS 250-LTorquePowerTORQUE
POWERNm kWTorquePowerTORQUES6-40%S6-60%S1S6-40%S6-60%S1POWERNm
kWFANUC Spindle MotorFANUC Spindle MotorFANUC Spindle MotorFANUC
Spindle Motor1241101049085.970503010103.41109086.771.65030104000
3000 12000500RPM5000 6000 20003000 2000 500
0343.8360320240286.522920018016014010060200RPM5000 5000 10002000
1500 500RPM2500 3000
350040004200100013117315913117315918161286421014TorquePowerTORQUE
POWERNm
kWS6-40%S6-60%S1343.8360320240286.5229200180160140100602002000 1500
500RPM2500 3000 3500 100018161286421014S6-40%S6-60%S1GS 150/42 GS
200/51 GS 200/66(L) & GS 65Hardinge/Fanuc Low WindingGS 250
& GS 250-LSpindle DrivesTorquePower TORQUE POWERNm kWSPINDLE
OUTPUT POWER/TORQUE1000 200 300 400500600700
80010020030040050060070015182118.536912RPM11360490604.6875292TorquePowerTORQUE
POWERNm kWTorquePowerTORQUE POWERNm kWSPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUE1000 200300
400500600700800100200300400600151818.536912RPM11409504105035090010001192401000
80054000
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW2461250114.420641711915
min, S3 15%5 min operating zone1000 8005400 0
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW246120017295.4500
5101500 6102000 0 3000 4000 6000 50007.5CONTINUOUS30 min, S3
60%75095.415 min, S3
40%920911114.5TorquePowerRPMTORQUEPOWER6020408062481090NmkW12
12011930 min, S3 60%15 min, S3 40% 114.6137.45000 4000 30007.57670
625 2000CONTINUOUSTorquePowerRPM20406080100TORQUE POWERNm kW246120
1214350 0 700 3150 2100 1400 1050 1750
24502800RPM3500438404360327280240200 1012141618.5CONTINUOUS30min,S3
60%15min,S3 15%TorquePowerTORQUE POWERNm kW40801201602468
Hardinge/Fanuc i-Series GSLow WindingSiemens 810DHardinge/Fanuc
i-Series GSHigh Winding15 min, S3 15%5 min operating
zoneCONTINUOUS15 min, S3 15%10 min operating zoneCONTINUOUS15 min,
S3 15%10 min operating zone18.5161410120RPM336.5240200280360525 840
1260 1680 2520 2100 2940 3780 3360 420015min,S3 15%30min,S3
60%CONTINUOUSTorquePowerTORQUEPOWERNmkW40801201602468Spindle
speed(6000rpm)FANUC Spindle Motor FANUC Spindle MotorSpindle
speed(5000rpm)FANUCSpindle MotorFANUC Spindle MotorSpindle speed
(4200rpm)Spindle speed (3500rpm)Spindle speed(1500rpm)Spindle
speed(1250rpm) Spindle speed (1050rpm)Spindle speed (875rpm)Spindle
speed(6000rpm) Spindle speed(5000rpm) Spindle speed
(4200rpm)SIEMENS Spindle Motor SIEMENS Spindle Motor SIEMENS
Spindle Motor SIEMENS Spindle MotorSpindle speed (3500rpm)GS 150 GS
200 GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200
GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200 GS
200/66 & GS 200/66-L GS 250 & GS 250-LTorquePowerTORQUE
POWERNm kWTorquePowerTORQUES6-40%S6-60%S1S6-40%S6-60%S1POWERNm
kWFANUC Spindle MotorFANUC Spindle MotorFANUC Spindle MotorFANUC
Spindle Motor1241101049085.970503010103.41109086.771.65030104000
3000 12000500RPM5000 6000 20003000 2000 500
0343.8360320240286.522920018016014010060200RPM5000 5000 10002000
1500 500RPM2500 3000
350040004200100013117315913117315918161286421014TorquePowerTORQUE
POWERNm
kWS6-40%S6-60%S1343.8360320240286.5229200180160140100602002000 1500
500RPM2500 3000 3500 100018161286421014S6-40%S6-60%S1TorquePower
TORQUE POWERNm kWSPINDLE OUTPUT POWER/TORQUE1000 200 300
400500600700
80010020030040050060070015182118.536912RPM11360490604.6875292TorquePowerTORQUE
POWERNm kWTorquePowerTORQUE POWERNm kWSPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUESPINDLE OUTPUT POWER/TORQUESPINDLE OUTPUT
POWER/TORQUE1000 200300
400500600700800100200300400600151818.536912RPM11409504105035090010001192401000
80054000
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW2461250114.420641711915
min, S3 15%5 min operating zone1000 8005400 0
200600CONTINUOUSTorquePowerRPM4080120160200TORQUEPOWERNmkW246120017295.4500
5101500 6102000 0 3000 4000 6000 50007.5CONTINUOUS30 min, S3
60%75095.415 min, S3
40%920911114.5TorquePowerRPMTORQUEPOWER6020408062481090NmkW12
12011930 min, S3 60%15 min, S3 40% 114.6137.45000 4000 30007.57670
625 2000CONTINUOUSTorquePowerRPM20406080100TORQUE POWERNm kW246120
1214350 0 700 3150 2100 1400 1050 1750
24502800RPM3500438404360327280240200 1012141618.5CONTINUOUS30min,S3
60%15min,S3 15%TorquePowerTORQUE POWERNm kW40801201602468
Hardinge/Fanuc i-Series GSLow WindingSiemens 810DHardinge/Fanuc
i-Series GSHigh Winding15 min, S3 15%5 min operating
zoneCONTINUOUS15 min, S3 15%10 min operating zoneCONTINUOUS15 min,
S3 15%10 min operating zone18.5161410120RPM336.5240200280360525 840
1260 1680 2520 2100 2940 3780 3360 420015min,S3 15%30min,S3
60%CONTINUOUSTorquePowerTORQUEPOWERNmkW40801201602468Spindle
speed(6000rpm)FANUC Spindle Motor FANUC Spindle MotorSpindle
speed(5000rpm)FANUCSpindle MotorFANUC Spindle MotorSpindle speed
(4200rpm)Spindle speed (3500rpm)Spindle speed(1500rpm)Spindle
speed(1250rpm) Spindle speed (1050rpm)Spindle speed (875rpm)Spindle
speed(6000rpm) Spindle speed(5000rpm) Spindle speed
(4200rpm)SIEMENS Spindle Motor SIEMENS Spindle Motor SIEMENS
Spindle Motor SIEMENS Spindle MotorSpindle speed (3500rpm)GS 150 GS
200 GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200
GS 200/66 & GS 200/66-L GS 250 & GS 250-LGS 150 GS 200 GS
200/66 & GS 200/66-L GS 250 & GS 250-LTorquePowerTORQUE
POWERNm kWTorquePowerTORQUES6-40%S6-60%S1S6-40%S6-60%S1POWERNm
kWFANUC Spindle MotorFANUC Spindle MotorFANUC Spindle MotorFANUC
Spindle Motor1241101049085.970503010103.41109086.771.65030104000
3000 12000500RPM5000 6000 20003000 2000 500
0343.8360320240286.522920018016014010060200RPM5000 5000 10002000
1500 500RPM2500 3000
350040004200100013117315913117315918161286421014TorquePowerTORQUE
POWERNm
kWS6-40%S6-60%S1343.8360320240286.5229200180160140100602002000 1500
500RPM2500 3000 3500 100018161286421014S6-40%S6-60%S1GS 150 /42
Hardinge/Fanuc High WindingSpindle Speed (6000rpm)Fanuc Spindle
Motor18.5161410120RPM120100140600 120018002400 36003000 4200
54004800 6000S3 25% Operating Zone30min,S3
60%CONTINUOUSTorquePowerTORQUE POWERNm kW2040608024687.591400
750126114.595.4 Operating ZoneSPINDLE OUTPUT
POWER/TORQUE024681012200400600800
12001000RPM25507512515010014001500175591176.3143.1kW Nm TorquePower
TORQUE5min operating zone15min ,S3 15%operating
zoneContinuousoperating zoneSPINDLE OUTPUT POWER/TORQUEGS 150 /42
Hardinge/Fanuc Low Winding02468200400600800
12001000RPM5010015021030020012501012500951117195.4kW Nm TorquePower
TORQUE5min operating zone15min ,S3 15%operating
zoneContinuousoperating zoneSPINDLE OUTPUT POWER/TORQUEGS 200
/51Hardinge/Fanuc Low WindingHardinge/Fanuc Low WindingGS 250&
GS 250LkW NmTorquePower
TORQUE024681012150300450600750RPM87560120180300360141642024018.529246748054060549124518157.55min
operating zone15min ,S3 15%operating zoneContinuousoperating
zoneSPINDLE OUTPUT POWER/TORQUE02.557.51012.515150300450600
900750RPM10505010015025030056017.535040935320418.5504450kW
NmTorquePowerTORQUE5min operating zone15min ,S3 15%operating
zoneContinuousoperating zoneSPINDLE OUTPUT POWER/TORQUEGS 200 /66,
GS 200/66L & GS 65Hardinge/Fanuc Low
Winding18.5161410120RPM120100500 100015002000 30002500 3500
45004000 5000S3 25% Operating Zone30min,S3
60%CONTINUOUSTorquePowerTORQUE POWERNm kW2040608024687.591167
625137151160114.5 Operating ZoneSPINDLE OUTPUT POWER/TORQUEGS 200
/51Hardinge/Fanuc High WindingSpindle Speed (5000rpm)Fanuc Spindle
MotorSPINDLE OUTPUT POWER/TORQUEGS 250& GS 250LHardinge/Fanuc
High WindingSpindle Speed (3500rpm)Fanuc Spindle
Motor05101526100015002000
30002500RPM350050150201002002505006423003503861167400437.5240327kW
NmTorquePowerS3 25%operating zone30min, S3 60%operating
zoneContinuousoperating zonePOWERSPINDLE OUTPUT POWER/TORQUEGS 200
/66, GS 200/66L & GS 65Hardinge/Fanuc High WindingSpindle Speed
(4200rpm)Fanuc Spindle Motor048122024600120018002400
36003000RPM42005010015025030026 3227701516111400200273525kW
NmTorquePowerS3 25%operating zone30min, S3 60%operating
zoneContinuousoperating zoneTORQUE POWERGS 250 & GS 250
LGeneral213mm (8.4")Color LCD Display Two Interpolating
AxesProgrammable Resolution 0.001mm (0.0001")Tool Offset Capability
0.001mm (0.0001")Tool Geometry and Tool Wear Offsets (64 pair
each)Inch/Metric Data Selection by G-Code1280 Meters (512 KB) Part
Program Storage Flash Card Slot Capability (up to 128 MB) Data
Input/OutputMDI (Manual Data Input) OperationReader/Punch Interface
Connection(RS-232 Software/Hardware)DNC (Remote Buffer) Embedded
EthernetSingle USB PortProgramming FunctionsAbsolute/Incremental
ProgrammingAdditional Tool Offsets (64 pair total) Additional
Custom Macro Variables AI Contour ControlBackground
EditingBlueprint Programming Canned Cycles (Drilling)Chamfer/Corner
RoundingConstant Surface Speed ProgrammingContinual Thread
CuttingCoordinate System Setting (G50)Custom Macro B
Diameter/Radius ProgrammingExtended Part Program Edit
(Copy/Replace) Graphic Display Hardinge Safe Start FormatInput of
Offset Value by Programming (G10)Interpolation (Linear and
Circular)Manual Guide (G-Code Assist) Multiple Repetitive Canned
Cycles I (Turning) Multiple Repetitive Canned Cycles II (Pockets)
Nano InterpolationRegistered Part Programs (200 total) Rigid
Tapping Single Block OperationSpare M-Codes (3) Thread, Synchronous
CuttingTool Life Management Tool Nose Radius CompensationVariable
Lead Thread Cutting OperationBlock DeleteClamp/Unclamp Indicator
Light Switch Coolant ControlDry Run Dwell TimeEmergency
StopFeedholdFeedrate Override (0 to 150%)Incremental JogJog Feed
Override (0 to 1260 mm/min)Machine LockManual Pulse Generator (MPG
Handwheel)On-Screen Spindle & Axis Load MetersOption StopRapid
Traverse Override (Low-25-50-100%)Single BlockSpindle Speed and
T-Code Displays on All Screens Spindle Speed Override (50 to 120%)
Fanuc Oi-TD ControlCNC ControlGS Series Performance Turning
CentersFanuc Oi-TD Control9MiscellaneousAlarm Display English Color
LCD Display with Full Keyboard French/German, Italian or
SpanishOOn-Screen HELP Functions for AlarmsProgram Protect Run Time
and Parts Counter Self-Diagnosis Function Spindle Lock (Servo)
Spindle OrientOne-Degree Stored Pitch Error Compensation Standard
value-added features that may be offered as options by other
machine builders Standard O OptionalGS-Series Performance Turning
Centers10GS 150/42GS 200/51GS 200/66/65GS 200/66 LGS 250GS 250
LSpindleChuck-Ready Spindle Confg.ANSI
1A2-5A2-6A2-6A2-6A2-8A2-8Draw Tube
TypeHydraulicHydraulicHydraulicHydraulicHydraulicHydraulicThrough
Draw Tube Capacity45mm (1.77)52mm (2.05)66mm (2.60)66mm (2.60) 78mm
(3.07)78mm (3.07) GS 42/GS 51/GS 6542 (1.65) 51mm(2) 67mm (2.63)
Jaw Chuck SizeMax.150mm (6)200mm (8)200mm (8)200mm (8)250mm
(10)250mm (10)Gripping Capacity 135mm
(5.31)7.28/185mm7.28/185mm7.28/185mm9.00/288.6mm9.00/288.6mm
Machining DiameterMax.284mm (11.10)284mm (11.10)356mm (14.015)356mm
(14.015)356mm (14.015)356mm (14.015) Turning LengthMax. 2, 3406mm
(15.98)406mm (15.98)600mm (23.62)1050mm (41.34)600mm (23.62)
1024.6mm (40.31)GS 42/GS 51/GS 65456mm (17.95)456mm (17.95)600mm
(23.62)Hang Weight with Device and Part34kg (75lb)48kg (105lb)70kg
(154lb)70kg (154lb)117kg (258lb)117kg (258lb) Spindle Centerline
Height1,000mm (39.40)1,000mm (39.40)1,041mm (41.00)1,041mm
(41.00)1,041mm (41.00)1,041mm (41.00) Operators Reach to
Spindle280mm (11)280mm (11)432mm (17)432mm (17)432mm (17)432mm (17)
AC Digital Spindle Drive System 4Fanuc Control (S3)High WindingPeak
Power Rating18.5kW (24.7hp)18.5kW (24.7hp) 26kW (35hp)26kW
(35hp)26kW (35hp)26kW (35hp)Torque Rating126Nm (93ft-lb)151Nm
(111.3ft-lb)322Nm (237.6ft-lb)322Nm (237.6ft-lb)386Nm
(285ft-lb)386Nm (285ft-lb)Base Speed 1400 rpm 1167 rpm 770 rpm770
rpm 642 rpm 642 rpmMax. Speed-I-rpm Steps6000 rpm5000 rpm4200
rpm4200 rpm3500 rpm3500 rpm Fanuc Control (S3)Low Winding *Peak
Power Rating11kW (15hp)11kW (15hp)18.5kW (24.8hp)18.5kW
(24.8hp)18.5kW (24.8hp)18.5kW (24.8hp)Torque Rating175Nm
(128.4ft-lb)210Nm (154ft-lb)504Nm (371.4ft-lb)504Nm
(371.4ft-lb)605Nm (445.6ft-lb)605Nm (445.6ft-lb)Base Speed600
rpm500 rpm350 rpm350 rpm292 rpm292 rpmMax. Speed-I-rpm Steps1500
rpm1250 rpm1050 rpm1050 rpm875 rpm875 rpmCarriage and Cross
SlideSwing Dia. Over Way CoverMax.457mm (18.00)457mm (18.00)595mm
(23.42)595mm (23.42)595mm (23.42)595mm (23.42)TravelMax.X Axis
153mm (6.023)153mm (6.023)271.5mm (10.70)271.5mm (10.70)271.5mm
(10.70)271.5mm (10.70)Z Axis 406mm (16.00)406mm (16.00)600mm
(23.62)1050mm (41.34)600mm (23.62)1050mm (41.34)Traverse RatesMax.X
and Z Axes30m/min (1,181ipm)30m/min (1,181ipm)30m/min
(1,181ipm)30m/min (1,181ipm)30m/min (1,181ipm)30m/min
(1,181ipm)Z-Axis ThrustMax.With Fanuc Control17,907N
(4,026lb)17,907N (4,026lb)21,991N (4,944lb)21,991N (4,944lb)21,991N
(4,944lb)21,991N (4,944lb) Ball Screw DiameterX Axis 28mm
(1.102)28mm (1.102)36mm (1.417)36mm (1.417)36mm (1.417)36mm
(1.417)Z Axis 28mm (1.102)28mm (1.102)40mm (1.575)40mm (1.575)40mm
(1.575)40mm (1.575)AccuracyEvaluation StandardISO 230-2ISO 230-2ISO
230-2ISO 230-2ISO 230-2ISO 230-2RepeatabilityX and Z Axes
(ISO).005mm (.0002).005mm (.0002).005mm (.0002).005mm (.0002).005mm
(.0002).005mm (.0002)1Optional collet adaptation chucks available
in many confgurations, including 5C, 16C, 20C, 3J, S15, S20, B42
and B60. 2Dependent on type of live center used.3Maximum turning
length with tailstock option.4Peak ratings used for power and
torque specifcations.5Index time (includes unclamp and
clamp).6Original equipment only. 7Available on VDI top plate
only.8Balanced, 3-phase.*Availability may be limted to certain
markets.SpecifcationsActual results may be greater or less than
those listed due to a number of factorsincluding but not limited to
warm up cycles, speeds, feeds, tooling, machine maintenance,
coolant, material, ambient temperature and type of machine
foundation.11SpecifcationsGS 150/42GS 200/51GS 200/66/65GS 200/66
LGS 250GS 250 L Turret Top PlateBidirectionalVertical Block or VDI
30Vertical Block or VDI 30Vertical Block or VDI 40Vertical Block or
VDI 40Vertical Block or VDI 40Vertical Block or VDI 40 Number of
Station121212121212Square Shank Tool SizeMax.20mm or 3420mm or
3425mm or 125mm or 125mm or 125mm or 1Round Shank Tool SizeMax.32mm
or 11432mm or 11440mm or 11240mm or 11240mm or 11240mm or 112Index
TimeAdjacent Station 5 Vertical Block.46 Second.46 Second.3
Second.3 Second.3 Second.3 SecondVDI0.78 Second0.78 Second0.78
Second0.78 Second0.78 Second0.78 SecondVDI Live Tooling/C-Axis
Option 6, 7Tool Shank Diameter w/ER25 Collets2 to 16mm2 to 16mm2 to
16mm2 to 16mm2 to 16mm2 to 16mm.079 to .625.079 to .625.079 to
.625.079 to .625 079 to .625079 to .625 Power Rating at Tool Tip
43.7kW (5hp)3.7kW (5hp)8kW (10.5hp)8kW (10.5hp)8kW (10.5hp)8kW
(10.5hp)Torque Rating at Tool Tip425Nm (18.44ft-lb)25Nm
(18.44ft-lb)35.0Nm (25.80ft-lb)35.0Nm (25.80ft-lb)35.0Nm
(25.80ft-lb)35.0Nm (25.80ft-lb)Maximum Speed1-rpm
Steps5,0005,0004,0004,0004,0004,000C-Axis Contouring Resolution.001
Degree.001 Degree.001 Degree.001 Degree.001 Degree.001 Degree
Positioning Accuracy 1 Arc Min. 1 Arc Min. 1 Arc Min. 1 Arc Min. 1
Arc Min. 1 Arc Min.Repeatability1.75 Arc Min.1.75 Arc Min.1.75 Arc
Min.1.75 Arc Min.1.75 Arc Min.1.75 Arc Min. Tailstock
(Fully-Programmable) Option
6PositioningHydraulicHydraulicHydraulicHydraulicHydraulicHydraulicMorse
Taper CenterMT No. 4MT No. 4MT No. 5MT No. 5MT No. 5MT No. 5 Travel
of Tailstock Base341mm (13.42)341mm (13.42)625mm (24.60)1075mm
(42.32)625mm (24.60)1075mm (42.32) Part LengthMax. 2, 8381mm
(15.00)381mm (15.00)578mm (22.76)1012.5mm (39.86)565mm
(23.62)1012.5mm (39.86)GS 42/GS 51 499.7mm (23.62)499.7mm
(23.62)Min. 2GS150 42.7mm (1.68) GS200 42.7mm (1.68)20.0mm
(0.787)20.0mm (0.787)20.0mm (0.787)20.0mm (0.787)FeedrateMax.5.5
m/min (216ipm)5.5 m/min (216ipm)5.5 m/min (216ipm)5.5 m/min
(216ipm)5.5 m/min (216ipm)5.5 m/min (216ipm) ThrustMax. 3,470N
(780lb)3,470N (780lb)9,354N (2,103lb)9,354N (2,103lb)9,354N
(2,103lb)9,354N (2,103lb) Parts Catcher OptionWorkpiece Dia. x
LengthMax.52 x 100mm52 x 100mm65 x 160mm65 x 160mm65 x 160mm65 x
160mm 2.05 x 4 2.05 x 42.56 x 6.32.56 x 6.32.56 x 6.32.56 x 6.3
MiscellaneousPower Supply Requirement 8Fanuc
Control220v/67FLA/3phase220v/67FLA/3phase220v/74FLA/3phase220v/74FLA/3phase220v/74FLA/3phase220v/74FLA/3phaseCoolant
Tank Capacity125liter (33gal)125liter (33gal)290liter
(76.62gal)290liter (76.62gal)290liter (76.62gal)290liter
(76.62gal)Coolant PressureStandard2.8bar (40psi)2.8bar
(40psi)2.8bar (40psi)2.8bar (40psi)2.8bar (40psi)2.8bar (40psi)
Thru-Tool Coolant Option20bar (280psi)20bar (280psi)20bar
(280psi)20bar (280psi)20bar (280psi)20bar (280psi) Machine
WeightApprox.2694kg (5,940lb)2794kg (6,160lb)4950kg
(10,915lb)5550kg (12,236lb)5000kg (11,024lb)5600kg (12,346lb)
Shipping WeightApprox.3057kg (6,739lb)3157kg (6,959lb)5290kg
(11,664lb)5950kg (13,117lb)5340kg (11,773lb)6000kg (13,228lb)
Machine DimensionsLength1998mm (78.66)1998mm (78.66)2988mm
(117.64)3792mm (149.29)2988mm (117.64)3792mm (149.29) Length w/Chip
Conveyor Option2958mm (116.46)2958mm (116.46)3672mm (144.60)4476mm
(176.22)3672mm (144.60)4476mm (176.22)Depth1650mm (65)1650mm
(65)2142mm (84.33)2142mm (84.33)2142mm (84.33)2142mm (84.33)Depth
w/Control Unit at Max. Swivel2153mm (84.76)2153mm (84.76)2453mm
(96.58)2453mm (96.58)2453mm (96.58)2453mm (96.58) Height1781mm
(70.12)1781mm (70.12)1812mm (71.34)1823mm (71.77)1812mm
(71.34)1823mm (71.77) Floor AreaApprox.
3.3m2(35.5ft2)3.3m2(35.5ft2)5.1m2 (54.9ft2)8.5m2(91.5ft2)5.1m2
(54.9ft2)8.5m2(91.5ft2)All specifcations subject to change without
notice.All marks indicated by and are trademarks of their
respective owners.Brochure #1326D Litho in USA Hardinge Inc. 2009
5MOctober 2013North AmericaHardinge Inc. One Hardinge Drive Elmira,
NY 14902-1507 USA General Information: 607-734-2281 Sales Fax:
607.734.8819Workholding Fax: 607.734.3886Service: 800.424.2440 web
site: www.hardinge.comIn Canada:Canadian HardingeMachine Tools Ltd.
Phone: 800.468.5946Fax: 607.734.8819 China Hardinge
Machine(Shanghai) Co. Ltd.Hardinge China LimitedNo.1388 East Kang
Qiao RoadPudong , Shanghai 201319Tel : 0086 21 38108686Fax:0086 21
38108681Germany Hardinge GmbHSaalestrasse 2047800
KrefeldGermanyPhone: (49) 2151 496490Fax: (49) 2151 4964999Taiwan
Hardinge Machine Tools B.V.4 Tzu Chiang 3rd RoadNan Tou City540
Taiwan, R.O.C.Phone: 886 49 2260536Fax: 886 49 2252203e-mail:
[email protected] L. Kellenberger & Co.
AGHeiligkreuzstrasse 28PostfachCh-9008 St. GallenSwitzerlandPhone:
+41 (0) 71 242 91 11Fax: +41 (0) 71 242 92 22e-mail:
[email protected] web site: www.kellenberger.netL. Kellenberger
& Co. AGLngfeldweg 107CH-2500 Biel-Bienne 8SwitzerlandPhone:
+41 (0)32 344 11 52Fax: +41 (0)32 341 13 93e-mail:
[email protected] web site: www.kellenberger.netUnited
KingdomJones & Shipman Hardinge Ltd.Murrayfeld RoadLeicester,
LE3 1UW, UKTel: +44 (0) 116 2013000Fax: +44 (0) 116
2013002www.hardinge.co.ukOver the years, The Hardinge Group
steadily diversifed both its product offerings and
operations.Today, the company has grown into a globally diversifed
player with manufacturing operations in North America, Europe and
Asia. In addition to designing and building turning centers and
collets, Hardinge is a world leader in grinding solutions with the
addition of theKellenberger,Jones & Shipman, Hauser, Tschudin
and Usach brands to the Hardinge family.The company also
manufactures Bridgeport machining centers and other industrial
products for a wide range of material cutting, turnkey automation
and workholding needs.Expect more from your Hardinge products.
Choose Hardinge precisionand reliability for increased productivity
and value!Call us today, weve got your answer.Cert no.
BV-COC-054711Competence and worldwide partnership
