HARDIE-TYNES CO., INC. CATALOG - VIHN.net

HARDIE-TYNES CO., INC. CATALOG

LOT QTY DESCRIPTION

1 1 ELECTROMAGNETIC DRILL PRESS, MILWAUKEE

2 ELECTROMAGNETIC DRILL PRESS, MILWAUKEE

3 1 ELECTROMAGNETIC DRILL PRESS, ROTO BRUTE, MDL. RB50

4 1 ELECTROMAGNETIC DRILL PRESS, HOUGEN MDL. HMD914

5 1 ELECTROMAGNETIC DRILL PRESS, HOUGEN MDL. HMD904

6 1 ELECTROMAGNETIC DRILL PRESS, HOUGEN MDL. HMD9047 1 ELECTROMAGNETIC DRILL PRESS, HOUGEN MDL. HMD904

8 1 MAGNETIC BASE DRILL PRESS, JANCY SLUGGER

9 1 ELECTROMAGNETIC DRILL PRESS, HOUGEN MDL. HMD90410 1 MAGNETIC BASE DRILL PRESS, JANCY SLUGGER

11 1 MAGNETIC BASE DRILL PRESS, JANCY SLUGGER

12 1 LOT OF SLUGGER BITS, assorted (in one box)

13 1 LOT OF SLUGGER BITS, assorted (in two boxes)

14 1 ELECTRIC DRILL, BLACK & DECKER, H.D.

15 1 HAND GRINDER, DUMORE

16 1 ELECTRIC SCREW DRIVER & SOCKET WRENCH, BLACK &

DECKER

17 1 CIRCULAR SAW, MILWAUKEE 7 1/4"

18 1 LOT OF JIG SAWS, assorted

19 1 ELECTRIC DISC GRINDER, MATABO 8"

20 1 ANGLE GRINDER, DEWALT 4-1/2"

21 1 DIE GRINDER, DEWALT 1-1/2"

22 1 LOT OF GRINDING DISCS, assorted (under one bench)

23 1 ROUTER, PORTER CABLE MDL. 75362

24 1 MAGNAFLUX, YOKE MDL. Y-5, 115 v., 60 HZ-1FH, 6 amps

25 1 DRILL BIT SHARPENER, BLACK & DECKER

26 1 ELECTRIC BIAX-SCRAPER, DAPRA



29 1 MELTING POT, SEAL-PEEL, w/seal-peel

30 1 LOT OF WRENCHES, assorted (under one bench)

31 1 LOT OF WRENCHES, assorted (under one bench)

32 1 PNEUMATIC IMPACT WRENCH, INGERSOLL RAND 1-1/2", w/sockets

33 1 PNEUMATIC IMPACT WRENCH, INGERSOLL RAND 1", w/sockets

34 1 LOT OF PNEUMATIC IMPACT WRENCHES (2), INGERSOLL RAND

3/4", w/sockets

35 1 LOT OF IMPACT WRENCHES (4), w/sockets

36 1 LOT OF STRAIGHT GRINDERS (4), assorted

37 1 LOT OF PNEUMATIC REAMERS (4), assorted

38 1 LOT OF PNEUMATIC STRAIGHT GRINDERS (3), assorted

39 1 LOT OF PNEUMATIC RIGHT ANGLE GRINDERS (2)

40 1 LOT OF PNEUMATIC RIGHT ANGLE GRINDERS (3)

41 1 LOT OF PNEUMATIC REAMERS (4)

42 1 LOT OF PNEUMATIC TOOLS, assorted

43 1 LOT OF HAND TOOLS, assorted (under one bench)

44 1 LOT OF PIPE WRENCHES (7), assorted

1


LOT QTY DESCRIPTION

45 1 PNEUMATIC POWER VANE, CHICAGO PNEUMATIC MDL. 350-4-200

46 1 HAND PIPE THREADER, RIDGID MDL. 12-R, 5 pc.

47 1 HAND PIPE THREADER, RIDGID MDL. 12-R, 6 pc.

48 1 LOT OF PRY BARS, assorted (under one bench)

49 1 LOT OF PRY BARS, assorted (under one bench)

50 1 BENCH VISE, 5-1/2"

51 1 BENCH VISE, 6"

52 1 BENCH VISE, 6"

53 1 BENCH VISE, 6"

54 1 BENCH VISE, 5"

55 1 BENCH VISE, 5"

56 1 BENCH VISE, 5"

57 1 BENCH VISE, 5"

58 1 BENCH VISE, 4"

59 1 LOT OF ABRASIVES, assorted (under one bench)

60 1 LOT OF HEATING TORCHES (6)

61 1 DOUBLE END BENCH GRINDER, MILWAUKEE 8", 3/4 HP

62 1 METAL TAPEWRITER, ROOVERS MDL. T-20

63 1 METAL TAPEWRITER, ROOVERS

64 1 LOT OF HAND STAMPS, assorted

65 1 VISE, 7", w/stand

66 1 VISE, 6", w/stand

67 1 CRANE SCALE, MARTIN DECKER 4,000 LB. CAP.

68 1 ELECTROMAGNETIC LIFT MAGNET, WALKER MDL. WBM-25PB,

5,500 lb. max. load, charger cord

69 1 ELECTROMAGNETIC LIFT MAGNET, WALKER MDL. WBM-25PB,

4,000 lb. max. load, charger cord

69A 1 ELECTRO MAGNETIC LIFT

70 1 VERTICAL LIFT, RENFROE MDL. TL, 6 T. cap.




74 1 LOT OF VERTICAL LIFTS (2), RENFROE MDL. TL, 6 T. cap.







81 1 VERTICAL LIFT, approx. 6 T. cap.




85 1 LOT OF HORIZONTAL LIFTS (4), RENFROE MDL. TL, 3 T. cap.

86 1 LOT OF VERTICAL LIFTS (2)

87 1 LOT OF VERTICAL LIFTS (2), 1 T. cap.

88 1 LOT OF VERTICAL LIFTS (2), 1 T. cap.

89 1 LOT OF VERTICAL LIFTS (5), assorted

90 1 LOT OF CLEVISES (15), assorted

2


LOT QTY DESCRIPTION





95 1 LOT OF SLINGS, assorted (under one bench)

96 1 LOT OF C-CLAMPS (6), H.D.

97 1 LOT OF C-CLAMPS (16), H.D., assorted

98 1 LOT OF C-CLAMPS (18), 12"

99 1 LOT OF C-CLAMPS (12), WILTON 10"


101 1 LOT OF C-CLAMPS (13), COLUMBIAN 8"

103 1 LOT OF C-CLAMPS (10), IRWIN 8"



106 1 LOT OF C-CLAMPS (22), COLUMBIAN 6"

107 1 LOT OF C-CLAMPS, assorted

108 1 LOT OF BAR CLAMPS, assorted (under one bench)

109 1 LOT OF HD C-CLAMPS (3)

110 1 LOT OF HD C-CLAMPS (8), 6"

111 1 LOT OF HD C-CLAMPS (13)

112 1 LOT OF WOOD CLAMPS (5)

113 1 LOT OF SOCKETS, assorted

114 1 LOT OF BOTTLE JACKS (4), 20 T. cap.

115 1 LOT OF WHEEL PULLERS

116 1 LOT OF VISES (4), assorted

117 1 LOT OF THREAD DIES, assorted (in four boxes)

118 1 ULTRASONIC CLEANER, BRANSON MDL. 3200

119 1 ELECTRIC ETCHER, LECTNOETCH MDL. V-10A

120 1 LOT OF FILES, assorted (in two boxes)



123 1 LOT OF FILES, assorted (in four) boxes)

124 1 LOT OF SWIVEL EYE BOLTS (3)

125 1 LOT OF EYE BOLTS (6)

126 1 LOT OF EYE BOLTS (12), assorted

127 1 LOT OF EYE BOLTS, assorted (in one box)






133 1 LOT OF ALIGNMENT PINS, assorted ( in two boxes)

134 1 LOT OF ALIGNMENT PINS, assorted ( in one box)

135 1 LOT OF STEEL WEDGES, assorted (in one box)

136 1 LOT OF LIFTING CLAMPS, assorted (in one box)





141 1 LOT OF LIFTING CLAMPS, assorted

3


LOT QTY DESCRIPTION


143 1 LOT OF CHAIN HOISTS (2): Coffing 2 T. cap & Yale 1 T. cap.

144 1 BANDING CART, w/tools

145 1 LOT OF WORKBENCHES (10), assorted (Not to be removed until

empty)

146 1 LOT OF WORKBENCHES (9), assorted (Not to be removed until empty)

147 1 LOT CONSISTING OF: flex half couplings & gear hubs (on two skids)

148 1 LOT OF HAND TOOLS, assorted (on one skid)

149 1 LOT OF COME ALONGS (8), assorted (on one skid)

150 1 ELECTRIC PUMP, 1 HP

151 1 AIRLESS PAINT SPRAYER, GRACO BULLDOG

152 1 LOT OF PAINT POTS (4), assorted

153 1 LOT OF PAINT POTS (4), assorted

154 1 ELECTRIC PUMP, 1 HP

155 1 TRANSFER PUMP, LEESON, 3/4 HP

156 1 PORTABLE PLATFORM SCALE, DETECTO

157 1 LOT OF 2-WHEEL HAND CARTS (2)

158 1 LOT OF 2-WHEEL HAND CARTS (2)

159 1 BARREL CART

160 1 TRANSFER CART, 19" x 37"

161 1 LOT OF ROUND FANS (4), 42"

162 1 LOT OF PEDESTAL FANS (4)




166 1 KEROSENE FORCED AIR HEATER, REDDY HEATER, 125,000 BTU

167 1 KEROSENE FORCED AIR HEATER, MASTER, 135,000 BTU

168 1 LOT OF NATURAL GAS HEATERS (4)





173 1 LOT OF SET-UP JACKS (4)









182 1 LOT OF SET-UP JACKS (6), assorted

183 1 TRANSIT STAND, KEUFFEL & ESSER

184 1 HYDRAULIC DRILL, LAMINA

185 1 PORTABLE BEAM DRILL, PEDDINGHAUS, w/Milwaukee drill motor,

Laser

186 1 ABRASIVE CUT-OFF, CAMPBELL SEVER-ALL MDL 1A, 12"

4


LOT QTY DESCRIPTION

187 1 DOUBLE END BUFFER, U.S. MDL. 503, 14", 460 v., 3-phase

188 1 DOUBLE END GRINDER, BALDOR 6", 1/2 HP

189 1 DOUBLE END PEDESTAL GRINDER, BALDOR 8", 3/4 HP

190 1 DOUBLE END PEDESTAL GRINDER, BALDOR 7", 3/4 HP

191 1 DOUBLE END PEDESTAL GRINDER, U.S. 7", 3/4 HP

192 1 HYDRAULIC H-FRAME PRESS, CAROLINA 50 T. cap.

193 1 PARTS WASHER, SAFETY-KLEEN MDL. 81

194 1 PARTS WASHER, ZEP, 31" x 22" x 10"

195 1 SAND BLAST POT, CLEMCO 300 LB. CAP. MDL 1648, w/hoses &

mobile base

196 1 LOT OF BLASTING ABRASIVES, DUPONT STARBLAST

197 1 PIPE THREADER, OSTER PIPE MASTER 2", S/N XP-1142

198 1 LOT OF PIPE THREADING DIES, assorted

199 1 PIPE AND TUBE BENDER, HAUSFELD, w/wide assortment of dies

200 1 WELDING MACHINE, MILLER DELTAWELD MDL. 452, 450 amps @

32 v., 100% duty cycle, 60 Series wire feeder, S/N KK163049

201 1 WELDING MACHINE, MILLER DIMENSION MDL. 652, new 2011, 650

amps @ 44 v., 100% duty cycle, Miller 70 Series wire feeder, S/N

MB010827U

202 1 WELDING MACHINE, MILLER DIMENSION MDL. 652, new 2011, 650

amps @ 44 v., 100% duty cycle, stick welder, S/N MB10824U

203 1 WELDING MACHINE, LINCOLN MDL. DC600, 600 amps @ 44 v.,

100% duty cycle, wire feeder, S/N AC782320


100% duty cycle, wire feeder, S/N U1930510321






100% duty cycle, S/N U1981214616


100% duty cycle, w/wire feeders, S/N AC669903


100% duty cycle, w/wire feeders, S/N AC667334

210 1 WELDING MACHINE, LINCOLN IDEALARC MDL. DC1000, 1000 amps

@ 44 v.,100% duty cycle, S/NAC712508

211 1 WELDING MACHINE, MILLER DELTAWELD MDL. 452, 450 amps @

32 v., 100% duty cycle, S/N KK163052

212 1 MIG WELDER, MILLER DELTAWELD MDL. 451, 24 v. wire feeder, S/N

JJ507242

213 1 WELDING MACHINE, LINCOLN MDL. CV400, LN7 wire feeder, S/N

C1990400118

214 1 TIG WELDER, MILLER SYNCROWAVE MDL. 300, S/N JF958865

215 1 TIG WELDER, MILLER SYNCROWAVE MDL. 300, S/N JF958869216 1 WELDING MACHINE, MILLER MDL. 330A/BP, S/N JA440308

217 1 WELDING MACHINE, LINDE MDL. V650

218 1 WELDING MACHINE, LINDE MDL. V605

219 1 ELECTRODE STABILIZING OVEN, PHOENIX MDL 15D

220 1 LOT OF WELDING CURTAINS

5


LOT QTY DESCRIPTION

221 1 WELDING TRACTOR, LINCOLN MDL. LT7, w/wire feed, flux box &

controls

222 1 WELDING TRACTOR, LINCOLN MDL. LT7, w/wire feed, flux box &

controls

223 1 LOT OF WIRE FEEDERS (3), assorted

224 1 WELDING MACHINE, HOBART MDL. ML-304, 300 amps, 40 v., S/N

3DW0510

225 1 WELDING MACHINE, MILLER DELTAWELD 452, S/N KK163091

226 1 WELDING MACHINE, LINCOLN IDEALARC MDL. DC-600, S/N

AC448688

227 1 WELDING MACHINE, LINCOLN IDEALARC MDL. R3R-500, S/N

AC400579

228 1 WELDING MACHINE, LINCOLN IDEALARC MDL. R3R500

229 1 WELDING MACHINE, LINCOLN MDL. DC400

230 1 WELDING MACHINE, LINCOLN MDL. R3S600

231 1 LOT OF ACETYLENE TORCH SETS, w/cart & gauges



234 1 ACETYLENE TORCH CART





239 1 LOT OF BOTTLE CARTS (2)

240 1 LOT OF WELDING WIRE (72), ESAB SPOOLARC 120, MIL-120A-A,

1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)


1045" - 1.2 MM (on 25 lb. spools)

252 1 LOT OF WELDING WIRE, w/rack (assorted)

253 1 WELDING MANIPULATOR, RANSOME 12' X 12', fixed rotary base,

welding boom

6


LOT QTY DESCRIPTION

254 1 WELDING POSITIONER, ARONSON MDL. HD400A, 40,000 lb. cap. @

12" L.C., 84" sq. platen, adj. height base, S/N 7947

255 1 ELECTRODE STABILIZING OVEN, PHOENIX MDL 5, temp. range 100 -

450 deg.

256 1 WELDING POSITIONER, RANSOME MDL. 300PA, 30,000 lb. cap., 12"

above table, adj. height base, 72" rd. table, S/N 2324018

257 1 WELDING POSITIONER, PANDJIRIS MDL. 15-4 POSIT, 1500 lb. cap.

S/N 400-9679

258 1 POWER TURNING ROLL SET, JOE FULLER/RANSOME 22" DIA. X

27" TOTAL WIDTH, Mdl. LFRR, 210 T. turning cap., 30 T. load cap.,

quad rubber tires, S/N 95514247

259 1 POWER TURNING ROLL SET, RANSOME STEEL ROLL 17" DIA. X

24" FACE, approx. 50 T. cap., adj. wheel centers from 34" to 94"

260 1 HYDRAULIC IRONWORKER, PIRANHA 90 T. CAP., Mdl. P90, new

2000, 1-1/8" thru 1" punching cap., 6" x 6" x 5/8" angle shear cap., ½" x

20' flatbar shear cap., coper notcher, brake attach., S/N P90-1518

261 1 PLATE SHEAR, STEELWELD 10' X ½", Mdl. 510, 24" throat depth,

front operated backgauge, ball roller table, S/N M4105

262 1 INITIAL PINCH PLATE ROLL, BERTSCH 12' X 1-1/8", Mdl. 18, 18" roll

dia., 50 HP drive motor, 15” dia. grooved rear roll, hyd. drop end, sgl. axis

D.R.O., S/N M9782

263 1 CNC HORIZONTAL TRAVELLING COLUMN BEAM DRILL, OCEAN

AVENGER, new 2003, Siemens CNC control, 1.25” max. drill dia., 2.78”

to 8 IPM drill rate, 5 HP drive, 6” max. drill thickness, 3/8” to 39” Y axis,

62’ table length, hyd. clamping, Product No. YD183500000000, S/N 465

264 1 CNC ELECTRIC EYE BURNING MACHINE, ARONSON 8'W. X 45'L.,

Burny 3 CNC control, oxy. fuel torch w/motorized torch holder, HL7

Lineatrol elec. eye head

265 1 LOT OF PLATE STEEL, assorted

266 1 WELDING POSITIONER, CULLEN-FRIESTEDT 6,000 LB. CAP., Mdl.

60-638, 48" sq. platen, adj. height base

267 1 PRESSBRAKE, STEELWELD 400 T. CAP., Mdl. AL5-1/2-12, 14'-4”

overall, 12’-6” btn. housings, 14’ x ½” cap., 5-1/2” stroke,1' horn

extension left side, 12" throat depth, air clutch & brake, S/N N.A.

268 1 LOT OF PRESSBRAKE DIES, assorted

269 1 METALCUTTING HORIZONTAL BANDSAW, DOALL MDL. C-912M,

S/N 376-78125

270 1 PORTABLE SUB-ARC PLATE SEAMER, OGDEN, dual Lincoln Mdl.

NA3N wire feeder controllers, twin wire, 12' over plate width, tractor feed

system

271 1 CAST IRON SURFACE PLATE, 156" L. x 83 1/2"W. x 6" thk.

271A 1 SAND BLASTER, w/dust collector

272 1 SAND BLASTER, CLEMCO MDL. 2452, 6.0 CF cap., w/hoses & mobile

base

273 1 LOT CONSISTING OF: steel plate, I-beams, & table

274 1 LOT OF STEEL PLATE, w/racks (assorted)

275 1 LOT CONSISTING OF: steel plate, channel, & round stock, assorted

276 1 LOT CONSISTING OF: flat stock, angle iron, & I-beam, assorted

7


LOT QTY DESCRIPTION

277 1 LOT CONSISTING OF: steel, electric motor, blowers, hoist's & misc. (in

one corner)

278 1 LOT OF STEEL, assorted

279 1 HYDRAULIC WEB PUNCH, WHITNEY 100 T. CAP., Mdl. 791-019, on

fabricated steel stand, S/N 791-019-32485

280 1 WELDING POSITIONER, CULLEN FRIESTEDT MDL. 25, 25,000 lb.

cap., S/N 583

281 1 WELDING MACHINE, MILLER MDL. MP-45E. S/N HH016672

282 1 PLASMA CUTTING SYSTEM, ARONSON MDL. AP-105, S/N

N70762A183515

283 1 WELDING MACHINE, LINCOLN IDEALARC MDL. R3R-500, S/N

409413

284 1 WELDING MACHINE, MILLER, CONSTANT POTENTIAL DC ARC

WELDER

285 1 DIE LIFT CART, manual

286 1 DUST COLLECTOR, 55 gal.

287 1 PORTABLE HORIZONTAL AIR COMPRESSOR, QUINCY, 10 HP

288 1 LOT CONTENTS OF ROOM: welding rod, weld wire, & welder parts

(assorted)

289 1 LOT CONSISTING OF: pipe fittings, conveyor, & steel (assorted)

290 1 CAST IRON SURFACE PLATE, 168"L. x 85 1/2"W. x 8" thk.

291 1 WELDING POSITIONER, RANSOME MDL. 25P, 2,500 lb. cap., S/N

53244

292 1 DOUBLE END GRINDER, BRIDGEPORT 20"

293 1 CAST IRON T-SLOTTED TABLE, 186"L. x 30"W. x 6" thk.

294 1 LOT OF STEEL CABINETS (2), 54"W. x 48"L. x 20" dp.

295 1 LOT OF BENCHES (2), w/vise (assorted)

296 1 LOT CONSISTING OF: cabinets (7), benches (2) & refrigerator, assorted

297 1 BOX FAN, 46"

298 1 ELECTRODE STABILIZING OVEN, PHOENIX MDL. 1NM, temp. range

0-800 deg.

299 1 ELECTRODE STABILIZING OVEN, PHOENIX MDL. 13, temp. range

1000-550 deg.

300 1 LOT OF MAINTENANCE SUPPLIES (balance of room), assorted

301 1 CINTURN CHUCKING CENTER, CINCINNATI MILACROM MDL AT 8,

S/N 5320C0/8-83-001

302 1 BALANCING MACHINE, GISHOLT TYPE U, Size 3, S/N 2765-8

303 1 COORDINATE MEASURING MACHINE, SHEFFIELD CORDAX

304 1 LOT OF NUTS & BOLTS, assorted

305 1 SCAFFOLDING

306 1 LOT OF T-SLOTTED CAST IRON FLOOR PLATES, 72"W. x 23'L. (one

pair)

307 1 CAST IRON FLOOR PLATE, 96"W. X 18'L. X 17" thk.

308 1 PARALLEL, 241" x 14" x 15"

309 1 PARALLEL, 132" x 14" x 13"

310 1 LOT OF PARALLELS (2), 118" x 12" x 13"

311 1 LOT OF SET-UP BLOCKS (4), 15 1/2" x 40" x 23"


313 1 SET UP BLOCK, 8" x 40" x 24"

314 1 LOT OF SET-UP BLOCKS (4), 12" x 22" x 18"

8


LOT QTY DESCRIPTION



317 1 LOT OF RISERS (2), 14" x 26" x 26"

318 1 LOT OF V-BLOCKS (2), 6" x 22" x 22"

319 1 LOT OF PARALLELS (2), assorted

320 1 LOT OF STEEL SAW HORSES (6)



323 1 LOT OF EXTENSION CORDS, assorted (on four skids)

324 1 LOT OF WELDING LEADS & HOSES, assorted ( on three skids)

325 1 LOT OF AIR HOSE (on three skids)

326 1 LOT OF HARDWARE, assorted (on five skids)

327 1 LOT OF TRANSFORMER & CONTROL PANEL

328 1 HYDRAULIC UNIT

329 1 LOT OF ELECTRIC MOTORS (2), 15 HP & 25 HP

330 1 LOT OF SCRAP STEEL

330A 1 LOT OF ASSORTED STEEL & ETC. …(in side yard)

331 1 STEEL SAFETY CAGE, 36" x 36" x 50"

332 1 LOT OF WHEEL BARROWS (2)

333 1 LOT OF SPILL CONTAINMENT PALLETS (3), assorted

334 1 STEEL WORK PLATFORM, 48" x 44"

335 1 STEEL CRADLE

336 1 STEEL CRADLE

337 1 LOT OF HYDRAULIC PALLET JACKS (2)

338 1 I-BEAM, 372" x 8 x 14"

339 1 TORCH SET (on one skid)

340 1 LOT OF CHAIN SLINGS (2)

341 1 LOT OF SLINGS, assorted (in one box)

342 1 CHAIN SLING (on one skid)





347 1 LOT OF CHAIN SLINGS (3) (on one skid)

348 1 LOT OF LIFTING HOOKS (on one skid)

349 1 LOT OF LIFTING HOOKS (on one skid)

350 1 LOT OF TANK EARS (on one skid)

351 1 LOT OF LIFTING HOOKS, assorted (on one skid)

352 1 LOT OF CHAIN, assorted (in two barrels)

353 1 LOT OF LADDERS (7), assorted

354 1 OVEN, 2-door, 47" x 55" x 63' opening

355 1 DOUBLE END GRINDER, 8"

356 1 TABLE TOP DRILL PRESS, 14"

357 1 VERTICAL TURRET MILL, BRIDGEPORT MDL. J, 9" x 48" table, Mdl. T

cherrying attach., Mdl. J belt driven head

358 1 ENGINE LATHE, LEBLOND REGAL 15" X 30", spds: 45-1800 RPM,

taper attach., 8" dia. 3-jaw chuck, 12" dia. 4-jaw chuck, steadyrest,

faceplate, driving plate, misc. tooling, S/N 5C-562

359 1 ENGINE LATHE, SOUTHBEND 12" X 20", taper attach., 3-jaw chuck,

accessories, Catalog No. L145B, S/N 10145TKX14

9


LOT QTY DESCRIPTION

360 1 LOT OF CABINETS, w/hardware

361 1 SHELF, w/maintenance supplies

362 1 T-SLOTTED TABLE, 86" x 41-1/2" x 5"

362A 1 CAST IRON SURFACE PLATE W/stand

362B 1 (6) ASSORTED LIFTING TABLES

363 1 INDUCTION BEARING HEATER, REDCO, 220 v.

364 1 LOT CONSISTING OF: shelf, cabinets, foreman's desk, contents

364A 1 LOT OF CONTENTS OF ROOM, desk, charis, tables, shelving, etc.

366 1 CNC TURNING & MILLING CENTER, MORI SEIKI MDL.

NL3000Y/3000, new 6/2008, MSX850 CNC control, 39.2” sw. over bed,

32.5” sw. over crosslide, 16.5” turning dia., 118” turning length, 4.7” Y-

axis travel, .001 deg. spdl. indexing, 3-1/2" bar cap., 3,000 RPM, 40 HP,

12-station live turret, 6,000 RPM rotary tool spds., tool presetter, hyd.

turn thru steadyrest, Kitagawa 12" chuck, chip conveyor, assorted right

angle & straight turning toolholders, S/N NL301HE1272

367 1 LOT OF ROTARY TOOLHOLDERS (4), assorted (for the Mori Seiki

CNC Turning & Milling Center)

368 1 LOT OF LATHE TOOL BLOCKS (4), assorted (for the Mori Seiki CNC

Turning & Milling Center)

369 1 LOT CONSISTING OF: spring collets and assorted tooling (for the Mori

Seiki CNC Turning & Milling center)

370 1 TOOL CABINET, LISTA, w/endmills, taps & drills

371 1 CNC FLOOR TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS

MDL. G60-FX, rebuilt & retrofitted in 2006, Siemens 840DI CNC control,

120" Y-axis headstock vert. travel, 432" X-axis column travel, 48" Z-axis

spdl. Travel, 6" spdl. Dia., CAT-50 taper, spds: 25-1120 RPM, 53.6 HP

spdl. drive, 60 pos. ATC, 96" x 144" infeeding table, 72" x 96" infeeding

table, (2) 96" x 144" x 12" floor plates, glass scale feedback, chip

conveyor, way covers, coolant, S/N 455-32-82371A 1 LOT OF BORING HEADS (3), #50 taper

371B 1 LOT OF TOOLHOLDERS (19), CAT-50

371C 1 LOT CONSISTING OF: boring bars, drills, toolholders

371D 1 LOT OF SPRING COLLETS

372 1 SET-UP BLOCK, 48" x 59" x 23" ht.

373 1 SET-UP BLOCK, 48" x 59" x 23" ht.

374 1 SET-UP BLOCK, 48" x 59" x 23" ht.

375 1 SET-UP BLOCK, 48" x 59" x 23" ht.

375A 1 ENGINE LATHE, LEBLOND, 42" sw. over carriage, 20' dist. Btn.

Centers, spdl. spds: 6-315 RPM, 30 HP drive motor, 2 1/4" spdl. hole,

rapid traverse, 4-jaw chuck, (3) steadyrests, S/N 835, (NOTE: SOLD BY

PHOTO, LOCATED OFF-SITE AT STEWARD MACHINE COMPANY,

3911 13TH AVENUE NORTH, BIRMINGHAM, AL 35234.

376 1 GEAR SHAPER, MAAG 197” MDL. SH-350-500, 20.8” max. face width,

¾” dia. pitch, 3-95 SPM, Oblique head cutter, change gears, motor

w/electric pushbutton controls, S/N 4327 (Sold by Photo - Located off-

site at Steward Machine Company, 3911 13th Avenue North,

Birmingham, AL 35234)

10


LOT QTY DESCRIPTION

377 1 GEAR HOBBER, PFAUTER MDL. 3000-5000, new 1971, 120” to 200”,

1.27-DP max. cap., 9.8” max. face width, 200” max. workpiece dia.,

control console, hydraulics, cooling system, motor w/electrical

pushbutton controls, S/N 23877 (Sold by Photo - Located off-site at

Steward Machine Company, 3911 13th Avenue North, Birmingham, AL

35234)378 1 GEAR HOBBER, GOULD & EBERHARDT 72” MDL. 72H, 18” face

width, 36” table dia., tailstock, coolant system, change gears, motor

w/electrical pushbutton controls, S/N 6445A-9 (Sold by Photo - Located

off-site at Steward Machine Company, 3911 13th Avenue North,

Birmingham, AL 35234)379 1 GEAR HOBBER, NEWARK 48” MDL. 5, 24” max. face width, 43” table

dia., change gears, motor w/electrical pushbutton controls (Sold by

Photo - Located off-site at Steward Machine Company, 3911 13th

Avenue North, Birmingham, AL 35234)

380 1 GEAR GENERATOR, SYKES HERRINGBONE 68” MDL. 1600H, new

1982, 18.031 max. face width, 14-120 SPM, workholding fixture,

outboard suppt. stand, coolant system, change gears, motor w/electrical

pushbutton controls, S/N MP322/1 (Sold by Photo - Located off-site at


35234)

381 1 GEAR GENERATOR, GLEASON 24” MDL. 12, 3” max. face width,

motor w/electrical controls, index plates & change gears, S/N 17507

(Sold by Photo - Located off-site at Steward Machine Company, 3911

13th Avenue North, Birmingham, AL 35234)

382 1 GEAR GENERATOR, GLEASON 24” MDL. 12, 3” max. face width,

motor w/electrical controls, S/N N.A. (Sold by Photo - Located off-site at


35234)

383 1 STRAIGHT BEVEL CONLFLEX, GLEASON MDL. 24, new 1956, 24”

dia. X 3.5” face, change gears, motor w/electrical pushbutton controls,

S/N 32040 (Sold by Photo - Located off-site at Steward Machine

Company, 3911 13th Avenue North, Birmingham, AL 35234)

384 1 GEAR CHUCKER, MAAG 110,000 LB. CAP. MDL. MCR-500, 200” dia.

(disassembled) (Sold by Photo - Located off-site at Steward Machine

Company, 3911 13th Avenue North, Birmingham, AL 35234)

385 1 GEAR CUTTER, CINCINNATI 30” (Sold by Photo - Located off-site at


35234)

385A 1 GEAR HOBBER, GOULD & EBERHARDT MDL. 48H (NOTE: SOLD BY

PHOTO - LOCATED OFF-SITE AT STEWARD MACHINE COMPANY,

3911 13TH AVENUE NORTH, BIRMINGHAM, AL 35234)

386 1 CNC VERTICAL MACHINING CENTER, MAZAK MAZATEK MDL. V-

515, Mazatrol M32B CNC control, 121-1/2" x 51" table, 20" X-axis travel,

20" Y-axis travel, 40" Z-axis travel, 30 pos. ATC, CAT-50 spdl. taper, S/N

104993

387 1 CABINET, LISTA, w/taps, drills, assorted tooling

388 1 SUPPLY CABINET, 2-door, H.D., w/assorted tooling

389 1 LOT OF TOOLHOLDERS (14), CAT-50 taper

11


LOT QTY DESCRIPTION




393 1 LOT OF COLLET TOOLHOLDERS (2), w/collets

394 1 LOT OF COLLET TOOLHOLDERS (2), w/collets

395 1 COLLET TOOLHOLDER, w/collets

396 1 LOT OF SPRING COLLETS (18), 150 TG

397 1 SHELF, w/hold-downs & studs

398 1 INFEEDING ROTARY TABLE, GIDDINGS & LEWIS 96"W. X 145-

1/2"L., Mdl. 7RT, on sliding base, approx. 60" slide travel, pwr. clamping,

3-spd. drive, S/N A4407

399 1 T-SLOTTED CAST IRON ANGLE PLATE, 67"W. x 108" ht. x 35" dp.

400 1 LOT OF FABRICATED STEEL T-SLOTTED ANGLE PLATES, 36"W.

base section x 58' dp. x 96" ht. upper section (ttl. 12' ht. when combined,

2 pc. matched pair)

401 1 LOT OF FABRICATED STEEL ANGLE PLATES, 30"W. x 88" ht. x 34"

dp. (matched set)

402 1 LOT OF HEAVY T-SLOTTED MACHINE STANDS, 54"W. x 120"L., w/T-

slotted cast iron table

403 1 LOT OF CAST IRON ANGLE PLATES (2), 17-1/2" x 21-1/2" x 66-1/2"

404 1 LOT OF DRILLED & TAPPED CAST IRON ANGLE PLATES, 42" x 42"

(matched pair)

405 1 CAST IRON ANGLE PLATE, 42" x 36" x 30"

406 1 LOT OF CAST IRON ANGLE PLATES (2), 20" x 24" x 12"


408 1 LOT OF ANGLE PLATES (9), assorted

409 1 LOT OF CAST IRON CRADLES (2), 18" x 8" x 38"







416 1 LOT OF V BLOCKS (2)

417 1 LOT OF V BLOCKS (2)

417A 1 LOT OF ASSORTED SET UP BLOCKS (in 1 row)

418 1 TOOL CABINET, LISTA, w/taps, endmills, drills & tooling

419 1 LOT CONSISTING OF: workbench & cabinets (3)

420 1 LOT OF CABINETS (3), w/contents

421 1 T-SLOTTED FLOOR PLATE, 96" x 204"

422 1 RADIAL ARM DRILL, AMERICAN HOLE WIZARD 7' X 17", spds: 15-

1200 RPM

423 1 CABINET, w/hold-downs & studs

424 1 WASH BOOTH, 169" x 95"

425 1 POWER WASHER, ALKOTA MDL. 420X4, S/N 276876

426 1 LOT OF CONTROLS PANELS (2)

427 1 LOT OF TOOLING, assorted (on six skids)

12


LOT QTY DESCRIPTION

428 1 ROTARY SCREW AIR COMPRESSOR, INGERSOLL-RAND (out of

service)

429 1 SHOP CRANE, CAROLINA 3 T. CAP.

430 1 ELECTRIC PUMP

431 1 ELECTRIC PUMP

432 1 WELDER, LINCOLN

433 1 INGROUND BEAM SCALE, FAIRBANKS

434 1 CNC HORIZONTAL BANDSAW, BERRINGER MDL. HBP360A, new

1994, 14” x 14” cap., auto. feed w/H.D. infeed conveyor, CNC

programmable infeed control, 5.5 kW blade drive motor, 1-1/2" blade,

S/N 794305

435 1 RADIAL ARM DRILL, CARLTON 10' X 26", 4” spdl. dia., 24” spdl. travel,

#6 MT taper, spds: 10-1000 RPM, pwr. clamping & elevation, pwr. head

travel, 50"W. x 184"L. T-slotted base, S/N N.A.

436 1 CNC VERTICAL TURRET LATHE, O.M. MDL. TM-20, G.E. 1050 CNC

control, 78.7" table dia. w/(4) top jaws, 4 pos. indexing turret, pendant

control, S/N MN742595

437 1 UNIVERSAL MILL, BOKO MDL. F30, rebuilt 1996 by Dorries

Scharmann, 47-1/4" x 63" built-in rotary table, swivel vert. head, #50 NST

spdl. taper, spdl. spds: 36-1800 RPM, pendant control, approx. 48" max.

dist. spdl. to table, swivel column, S/N 64-516/68

438 1 VERTICAL BORING MILL, BETTS 20', 19'-1" table dia., 21'-3" table

swing (28.5" above table), 12’-10-3/4” max. ht. under rail, 121” under

saddles, (2) 84" travel swiveling rail heads, (6) table mtd. jaws, variable

spd. table drive, spds: .3-12.8 RPM, 2-axis D.R.O., ram travel, 50 HP

main table drive, threading on RH head, pendant control, S/N E6019

439 1 PORTABLE FLOOR TYPE HORIZONTAL BORING MILL, GIDDINGS &

LEWIS MDL. 570F, 8' vert. travel, 16' horiz. travel, 7" spdl., spds: 4-1200

RPM, main spdl. spds: 4-300 RPM, aux. drilling spdl. spds: 16-1200

RPM, machined configured for portable use w/column bales, S/N N.A.

440 1 POWER INFEEDING ROTARY TABLE, TOS TYPE ISO-16, new 1978,

86" sq., approx. 60" pwr. runway travel, S/N 01-07

440A 1 LOT OF ASSORTED TOOLING W/2 cabinets

441 1 RACK, w/round stock

442 1 LOT OF RACKS (2), w/round stock

443 1 RACK, w/round stock

444 1 RADIAL ARM DRILL, CINCINNATI “SUPER SERVICE” 7' X 19", spds:

18-1124 RPM, (2) H.D. box tables, pwr. clamping, pwr. head traverse,

S/N 6E-270

445 1 COMBINED PLANER MILL/PLANER, DETRICK & HARVEY 120” X

100” X 26’ OPEN SIDE, rebuilt & retrofitted by Kysor Machine Tools in

1979, 60' table width, 26' table length, 124" max. rail head cross travel,

92" max. clearance under spdl. face, 5 HP table drive motor, combined

mill/planning capability, Futurmill 40 HP H.D. rail mtd. milling head, spds:

53-900 RPM, #50 NST spdl. taper w/Universal milling attach., (2) side

planer heads, sliding outboard suppt. unit, H.D. rail mtd. planning head,

updated pendant mtd. control, sliding way covers, S/N N.A.

445A 1 AIRLIFT ROTARY TABLE, GIDDINGS & LEWIS 60" X 96"

13


LOT QTY DESCRIPTION

446 1 TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS MDL.

A110-T, 4.33" spdl., 74" x 48" table, 60" cross travel, 60" vert. travel, 72"

long. travel, #50 NST spdl. taper w/pwr. tool lock, variable spds: 7-1344

RPM in (4) ranges, Newall 3-axis D.R.O., S/N 1501553

447 1 CNC LATHE, MORI SEIKI MDL. SL35B1000, Fanuc MFT6 CNC control,

23.6” swing, 16.5” turning dia., 4.1” spdl. hole, 2,500 RPM, 30 HP, 12"

chuck, 10 pos. vert. turret, tool measuring eye, chip conveyor, S/N 1438

448 1 ENGINE LATHE, NILES 54" X 48', 43” swing over carriage, spds: 1.51-

171.8 RPM, 30 HP drive motor, bed mtd. taper attach., built-in faceplate

w/(4) jaws, (4) H.D. steadyrests, 3.5 turn thru followrest, pwr. rapid

traverse to carriage, full length thdng., S/N 22344

449 1 CNC TABLE TYPE HORIZONTAL BORING MILL, CINCINNATI

GILBERT SERIES DT 5-AXIS, Fanuc Series 0i-MD CNC control retrofit

on roller pedestal, 5" spdl., 60" x 96" plain table, 84” X-axis travel, 84” Y-

axis travel, 36” Z-axis travel, 46” W-axis travel, CAT-50 spdl. taper, spds:

5-1450 RPM, 25 HP, 36 pos. ATC, 36” right angle attach., spdl. chiller,

S/N SD52

450 1 CNC CONTOURING ROTARY TABLE, 60" sq.

451 1 LOT OF TOOLHOLDERS (25), CAT-50

452 1 LOT OF V FLANGE TOOLHOLDERS (27)

453 1 CNC TABLE TYPE HORIZONTAL BORING MILL, TOSHIBA MDL. BP-

130.P40, Tosnuc 888 CNC control, 5.12” spdl. dia., 9.84” milling spdl.,

70.0" x 155" table, 55,000 table load cap., 160" X-axis cross travel, 94" Y-

axis vert. travel, 59" Z-axis column travel, 28" W-axis spdl. travel, CAT-50

spdl. taper, spds: 5-2500 RPM, 30 kW spdl. drive motor, 200mm

extended spdl. snout, 38 pos. ATC, coolant thru spdl., S/N 130264

454 1 LOT OF BORING HEADS (3), CAT-50 taper

455 1 LOT OF TAPING HEADS (2), CAT-50 taper

456 1 LOT OF COLLET TOOLHOLDERS (2), CAT-50 taper, w/collets



459 1 RACK, w/CAT-50 taper toolholders (9)


461 1 CNC TABLE TYPE HORIZONTAL BORING MILL, TOSHIBA MDL. BP-

110.P20, Tosnuc 888 CNC control, 4.33” spdl. dia., 55" x 80" table,

30,000 lb. table cap., 100" X-axis travel, 65" Y-axis travel, 45" Z-axis

travel, 20" W-axis travel, CAT-50 taper spdl., spds: 5-3000 RPM, 22 kW

spdl. drive motor, 200mm extended spdl. snout, coolant thru spdl., S/N

130248

462 1 TABLE, w/CAT-50 taper toolholders (26)

14


LOT QTY DESCRIPTION

463 1 COMBINED PLANER MILL/PLANER, G.A. GRAY 72" X 72” X 20'

DOUBLE COLUMN, rebuilt & retrofitted by Kysor Machine Tools in 1981,

68” x 20’ table size, 72" dist. btn. columns, 72" max. ht. under rail, 20’

table stroke, Futurmill 30 HP rail mtd. quill type milling head, spds: 53-

900 RPM, 8" quill travel, Futurmill 30 HP side head w/spds: 187-1125

RPM, 8" quill travel, #50 NST spdl. taper, rail & side planer heads,

updated machine electrics w/modern pendant control, Siemens table &

crossrail drives, dual drive system for planning/milling, 75 HP planer drive

motor, roller way covers, S/N N.A.

464 1 CNC LATHE, AMERICAN MDL. 4025WX168 UNIVERSAL, Fagor

8055AT CNC control retrofit, 45" sw. over bed, 25" sw. over crosslide &

toolholder, 168” btn. centers, 3" hole thru spdl., spdl. spds: 5-750 RPM,

24" dia. 4-jaw chuck, 4 pos. pwr. turret, (2) steadyrests, full length chip

conveyor, S/N 81015465 1 ENGINE LATHE, AMERICAN 44" X 26', spds: 1.8-157 RPM, built-in

faceplate, 4-jaw chuck, followrest, bed mtd. sliding taper attach., (4)

steadyrests, rapid traverse, S/N 61358

466 1 ENGINE LATHE, MONARCH 32" X 132" MDL. 30NN, spds: 6-302

RPM, taper attach., 2-axis D.R.O., 30" dia. 4-jaw chuck, 2-1/2" spdl. hole,

faceplate, steadyrest, S/N 24973

467 1 ENGINE LATHE, LODGE & SHIPLEY 22" X 120" MDL. X, spds: 9-500

RPM, 21" dia. 4-jaw chuck, 12" dia. 4-jaw chuck, 2-axis D.R.O., 2-1/2"

spdl. hole, taper attach., steadyrest, S/N 35383

468 1 ENGINE LATHE, AMERICAN 14" X 54" STYLE B, spds: 23-1500 RPM,

taper attach., steadyrest, 10" dia. 3-jaw chuck, driving plate, faceplate,

S/N 78932

469 1 ENGINE LATHE, LODGE & SHIPLEY 20" X 78" POWERTURN, spds: 7-

1740 RPM, 1-3/4" spdl. hole, 5/8" sw. over bed, 17-3/4" sw. over

compound, 2-axis D.R.O., taper attach., steadyrest, 12" dia. 3-jaw chuck,

S/N 43083

470 1 RAM TYPE TURRET LATHE, WARNER & SWASEY NO. 5 MDL.

M4660, 2-axis D.R.O., spds: 25-1556 RPM, 3-1/2" spdl. hole, ratchet

style barfeed, assorted turret tooling, S/N 2633438

471 1 SADDLE TYPE TURRET LATHE, WARNER & SWASEY NO. 1A MDL.

M470, spds: 20-458 RPM, S/N N.A.

472 1 CARBIDE GRINDER, SETCO MDL. 112, 14" wheel, S/N 103329

473 1 DOUBLE END PEDESTAL GRINDER, 12", 3 HP motor

474 1 DOUBLE END PEDESTAL GRINDER, 8", 1/2 HP motor

475 1 LOT OF STEEL, assorted (in corner)

476 1 LOT CONSISTING OF: 5th axis, 4-jaw chuck & tailstock

477 1 CAST IRON SLOTTED LAYOUT TABLE, 96" x 15', w/Sheffield Mdl. 60A

measurement arm, 48" reach, 60" max. ht., sliding base, S/N 592902

478 1 PICKUP TRUCK, 2005 FORD MDL. F350 “SUPER DUTY”, Odo:

63,460 miles, AL Lic. No. 1BR2371, VIN 1FTF30565EC72648

479 1 FLATBED TRUCK, 2000 INTERNATIONAL MDL. 4700 T444E, 15'

diamond steel plate bed w/stake pockets & rub rails, toolboxes, Odo:

210,204 miles, AL Lic. No. 1X310135, VIN 1HTSCABN3YH231649

15


LOT QTY DESCRIPTION

480 1 FORKLIFT, HYSTER 16,000 LB. CAP., Mdl. H-165, Perkins diesel

engine, Monitrol trans., 92"W. fork carriage, 102"L. forks, carriage side

shift attach., air brakes, dual front cushion tires, S/N N.A.

481 1 FORKLIFT, HYSTER 13,700 LB. CAP., Mdl. H155XL, Perkins diesel

engine, Monitrol trans., 13,700 lb. cap. @ 24" L.C., 78"W. fork carriage,

72"L. forks, S/N F006D01931R

482 1 FORKLIFT, CLARK 4,000 LB. CAP., Mdl. TI40B, LP pwrd., 4,000 lb.

cap. @ 24" L.C., 147' max. lift, S/N IT35524377

483 1 AIR COMPRESSOR, INGERSOLL RAND MDL. SSR-XF100, 495 CFM,

100 HP drive motor, air cooled, S/N CK3485U00182

484 1 ROTARY SCREW AIR COMPRESSOR , INGERSOLL-RAND MDL.

SSREP50, 32,932 H.O.M. (in shed)

485 1 SELF-DUMPING HOPPER, JESCO, 1.5 cu. ft. cap.





490 1 ENGINE LATHE, LODGE & SHIPLEY 20" X 19' MDL. X, 23" actual sw.

over bed, 14" sw. over crosslide, taper attach., (3) steadyrests, spds: 9-

500 RPM, 21" dia. 4-jaw chuck, 18" dia. 4-jaw chuck, 12" dia. 3-jaw

chuck, faceplate, assorted tooling, S/N 37111

491 1 ENGINE LATHE, LODGE & SHIPLEY 26" X 72" POWERTURN MDL.

RXE2516, 16" sw. over crosslide, spds: 15-1000 RPM, taper attach., 21"

dia. 4-jaw chuck, (2) steadyrests, faceplate, assorted toolholders, S/N

44298

492 1 HYDRAULIC SURFACE GRINDER, DOALL 10" X 30" MDL. D1030-14,

14" max. ht. under new wheel, fine line electromagnetic chuck & controls,

incremental downfeed, over-the-wheel dresser, 12" x 1" wheel, S/N 230-

68167

493 1 HYDRAULIC KEYSEATER, MITTS & MERRILL NO. 2, 16" x 18-1/2"

table, assorted cutters, arbors & tooling, S/N G32555

494 1 PLAIN SHAPER, GOULD & EBERHARDT 32", adj. 16" x 24" table,

spds: 8-120 SPM, w/tooling

495 1 VERTICAL TURRET MILL, BRIDGEPORT SERIES 1, 9" x 48" table, 2-

axis D.R.O., (2) pwr. feed units, (2) 6" riser blocks, chrome ways, S/N

213142

496 1 VERTICAL TURRET MILL, BRIDGEPORT MDL. 2J, 9" x 42" table,

variable spds. to 4,000 RPM, 2-axis D.R.O., chrome ways, (3) pwr. feed

units, S/N 243240

497 1 UNIVERSAL CYLINDRICAL GRINDER, LANDIS 14" X 96" MDL. 3RH,

2" x 20" wheel, swivel workhead, 5 HP wheelhead drive motor, (5) 2 pt.

steadyrests, (1) 3 pt. steadyrest, (2) back rests, 12" dia. 4-jaw chuck,

balance arbor, coolant system w/magnetic separator, assorted collets,

assorted table guarding, S/N 796-87

498 1 LOT OF RISERS (4), 11-1/2" ht. x 8"W. x 6-1/2" dp.




502 1 LOT OF SET-UP BLOCKS, assorted (on four shelves)



16


LOT QTY DESCRIPTION


506 1 LOT OF CABINETS (2), w/contents

507 1 RACK, w/set-up blocks

508 1 LOT OF LIVE CENTERS (4), assorted (in two boxes)

509 1 LOT OF LIVE CENTERS (8), assorted (in two boxes)

510 1 LOT CENTERS (3)

511 1 LOT OF CENTERS (6)

512 1 LOT OF CENTERS (8)

513 1 LOT OF CENTERS (in two boxes)

514 1 LOT OF LATHE DOGS, assorted

515 1 LOT OF BORING BARS, assorted

516 1 LOT OF CUTTING TOOLS: carbide tipped & high speed

517 1 LOT OF HOLD-DOWNS, assorted (on two benches)

518 1 SHELF, w/hold-downs, assorted

519 1 SHELF, w/hold-downs, assorted

520 1 LOT OF LATHE JAWS (4)

521 1 TABLE, w/studs, assorted

522 1 TABLE, w/studs, assorted

523 1 RACK, w/studs, assorted

524 1 RACK, w/set-up tooling, assorted

525 1 TOOL CABINET, LISTA

526 1 CABINET, 2-door, H.D.

527 1 LOT OF TOOLING, assorted (in corner)

528 1 FURNACE, LUCIFER MDL. 8012, 2,300 deg. F. max. temp. on upper,

tempering oven w/lower tempering oven, S/N 2275

529 1 FURNACE, HUEBERT MDL. 12CHTEMP, S/N 782

530 1 LOT CONTENTS OF ROOM: electrical parts, cabinets, workbenches

531 1 LOT CONTENTS OF ROOM: pipe fittings, hardware

532 1 SHAFT GRINDER, 82"L., 3-jaw chuck

533 1 ICE MAKER, GENESIS

534 1 WORKBENCH, w/vise

535 1 LOT OF STEEL PARTS, assorted (located outside door by restroom)

536 1 LOT OF DRILLED & TAPPED ANGLE PLATES, 30"W. x 87" ht. x 30"

(one pair)

537 1 LOT OF CAST IRON ANGLE PLATES, 42" x 42" x 24" (matched set)

538 1 LOT OF FABRICATED STEEL ANGLE PLATES, 24" x 24" x 24"

(matched set)

539 1 LOT OF FABRICATED STEEL ANGLE PLATES, 24" x 24" x 24"

(matched set)


541 1 LOT OF FABRICATED STEEL ANGLE PLATES (2), 6" x 36" x 24", (1)

w/machine vise

542 1 LOT OF CAST IRON STEEL CRADLES (2)

543 1 LOT OF CAST IRON STEEL CRADLES (2)

544 1 LOT OF V BLOCKS (2), 36' x 10"

545 1 LOT OF SET-UP BLOCKS (4)

546 1 AIRLIFT ROTARY TABLE, GIDDINGS & LEWIS 48"

17


LOT QTY DESCRIPTION

547 1 HYDROSTATIC ROTARY TABLE, GIDDINGS & LEWIS 48"

548 1 AIRLIFT ROTARY TABLE, GIDDINGS & LEWIS 48"

549 1 POWER ROTARY TABLE, GIDDINGS & LEWIS 48"

550 1 POWER ROTARY TABLE, 28", w/worm drive

551 1 DIVIDING HEAD, HOFFMANN MDL. HTH250, matching tailstock, index

plates

552 1 TOOLPOST MOUNTED GRINDER, H.D., w/accessories

553 1 LOT OF MACHINE VISES (2): 16" & 8-1/2"

554 1 ROTARY TABLE, 18"

555 1 HORIZONTAL/VERTICAL FIXTURE PLATE, PRECISION 24" SQ., w/T-

slots, cast iron construction

556 1 T-SLOTTED SUB-TABLE, 54" x 22"

557 1 T-SLOTTED SUB-TABLE, 54" x 22"

558 1 LOT OF RACKS (2), w/tooling, assorted

559 1 SUPPLY CABINET, 2-door, H.D.
















575 1 LOT OF LOCKERS, assorted

576 1 DIAL TYPE MILL, CINCINNATI NO. 2MI, vert. head, spds: 25-1500

RPM, 10" x 52-1/2" universal swivel table, S/N 2J2U1T-96

577 1 TOOL & CUTTER GRINDER, CINCINNATI NO. 2MT, pwr. feed,

extended table, tilt swivel spdl., large assortment of accessories, S/N

1671028

578 1 BOX COLUMN DRILL, CINCINNATI BICKFORD “SUPER SERVICE”

20", table raising mechanism, heavy gear design

579 1 NO DUST PEDESTAL GRINDER, HAMMOND, H.D.

579A 1 VERTICAL BANDSAW, DELTA 13-1/2"

580 1 CARBIDE TOOL GRINDER, DELTA

581 1 DRILL GRINDER, OLIVER MDL. 700, up to 4" cap., S/N 8764

582 1 ENGINE LATHE, LODGE & SHIPLEY 16" X 84" MDL. X, 18" actual sw.

over bed, taper attach., steadyrest, 10" dia. 3-jaw chuck, spds: 14-1160

RPM, followrest, faceplate, S/N 40002

583 1 PRECISION LATHE, SOUTHBEND, w/tooling, S/N 8563TKX14

584 1 DRILL PRESS, DELTA ROCKWELL 17", S/N 71-1965

585 1 TOOL & CUTTER GRINDER, CINCINNATI MONOSET, assorted collets

& cams, S/N 3152A0176-0012

18


LOT QTY DESCRIPTION

586 1 OPTICAL COMPARATOR, MITUTOYO MDL. PH350A, 14" dia. screen,

accessories, S/N 8718

587 1 RACK, w/tooling, assorted

588 1 LOT OF ABRASIVES, assorted

589 1 LOT OF SHELF SECTIONS (5), w/tooling, assorted

590 1 RACK, w/drills, shim stock & tooling, assorted

591 1 LOT CONSISTING OF: cabinet & vise

592 1 LOT OF LATHE DOGS, assorted

593 1 CHUCK, 18" dia. 4-jaw

594 1 LOT OF CHUCKS (5), assorted

595 1 MACHINE VISE, 8"




599 1 DRILL VISE, PALMGREN 8"

600 1 MACHINE VISE, 6" (2 pc.)

601 1 MACHINE VISE, 6" (2 pc.)

602 1 INDEXING HEAD, CINCINNATI

603 1 RADIUS DRESSER

604 1 ROTARY TABLE, 16"

605 1 CABINET, w/grinder

606 1 LOT OF T-8 TOOLING, assorted

607 1 RADII-CUTTER, HOLDRIDGE MDL. 8-D

608 1 END MILL SHARPENING FIXTURE, WELDING MDL. 200

609 1 RELIEVING FIXTURE, WELDON

610 1 DRILL & TAP HOLDER, QUICK CHANGE





615 1 TOOLPOST GRINDER, DUMORE

616 1 LOT OF WORKBENCHES (2), w/contents (located under benches)

617 1 LOT OF TOOLING, assorted (in four sections)

618 1 LOT CONSISTING OF: drill sleeves, reamers, taps, etc. (in five

sections)

619 1 LOT CONSISTING OF: drills & taps (in three sections)

620 1 ARBOR PRESS, ATLAS NO. 2

621 1 LOT CONSISTING OF: drills, taps & tooling (in three sections)

622 1 CABINET, w/taps & tooling, assorted

623 1 TOOL CABINET, VIDMAR, 8-drawer, w/taps, endmills, spade drills

623A 1 LOT OF ASSORTED TOOL HOLDER REPAIR PARTS w/2 parts bins

624 1 LOT OF CABINETS, wood fabricated, w/contents

625 1 CABINET, H.D., 2-door, w/tooling

626 1 SHELF, w/grinding wheels

627 1 PROBE, RENISHAW MDL. MP3, on CAT-50 taper holder

628 1 PROBE, RENISHAW MDL. MP8, on CAT-50 taper holder

629 1 PROBE, VALENON, on #40 taper holder

630 1 LOT OF BORING HEADS (5), #50 taper

19


LOT QTY DESCRIPTION








638 1 LOT OF TOOLHOLDERS (10), #50 taper













650A 1 LOT OF (2) TAPER TOOL HOLDER RACKS

651 1 STEEL LAYOUT TABLE, 200" x 98" x 14"

652 1 LOT OF INSERT TOOLHOLDERS (11) (in one box)

653 1 LOT OF LIVE CENTERS (2)

654 1 LOT OF CENTERS, assorted (in one box)

655 1 LOT OF SPRING COLLETS, assorted

656 1 LOT OF HONES, assorted

657 1 LOT OF LAPPING PLATES (2)

658 1 LOT OF AIR BEARING GRINDING FIXTURES (2)

668 1 LOT OF INSERT TOOLHOLDERS (13)





673 1 LOT OF INSERT TOOLHOLDERS (in one box)









682 1 LOT OF INSERT CUTTERS (in one box)


684 1 LOT OF BORING BARS (18)

685 1 LOT OF BORING BARS (in one box)


20


LOT QTY DESCRIPTION







693 1 LOT OF INSERT DRILLS (in one box)

694 1 LOT OF INSERT CUTTERS (3) (in one box)

695 1 LOT OF INSERT MILLING CUTTERS (4)










705 1 LOT OF INSERT MILLING CUTTERS (10

706 1 CAST IRON SURFACE PLATE, 122" x 109" x 1"

707 1 LOT OF CARBIDE INSERTS (in three boxes)












719 1 LOT OF CARBIDE INSERTS (in two boxes)

720 1 LOT OF DIAMOND GRINDING WHEELS

721 1 BANDSAW, DOALL 16" MDL. 16-2, w/blade welder, S/N 45-55666

722 1 LOT OF DRILL SLEEVES (in two rows)




726 1 LOT OF DRILL EXTENSIONS (in two boxes)

727 1 LOT OF DRILL HOLDERS (in two boxes)

728 1 LOT OF DRILL HOLDERS (in three boxes)

729 1 TAPER, w/inserts

730 1 LOT OF QUICK CHANGE TOOLHOLDERS (in one box)

731 1 LOT OF DRILL CHUCKS (in one box)

732 1 LOT OF DRILL EXTENSIONS (on one shelf)

733 1 LOT OF TAP & DRILL HOLDERS (in one box)

734 1 LOT OF BORING BARS

21


LOT QTY DESCRIPTION

734A 1 LOT OF ASSORTED BORING BAR AND HEADS (on 1 shelf)

735 1 STEEL SHELF

736 1 CABINET, H.D. 2-door

737 1 LOT OF PRECISION SET-UP BLOCKS (12), 3-1/2" x 7-1/2" x 5-1/2"

738 1 LOT OF PRECISION SET-UP BLOCKS (4)

739 1 LOT OF V-BLOCKS (11)

740 1 LOT OF TOOL MAKERS SCREW JACKS

741 1 LOT OF TOOL MAKERS SCREW JACKS

742 1 RACK, w/tooling

743 1 LOT OF SET-UP BLOCKS

744 1 VERTICAL TURRET MILL, BRIDGEPORT, 9" x 42" table, S/N 87106

745 1 BELT SANDER, G&P 2" MDL. R-290-5, S/N G-6939

746 1 DRILL PRESS, 14"

747 1 TOOL STORAGE CABINET, LISTA TYPE, 11-drawer

748 1 LOT OF RISERS (13)

749 1 CABINET, w/stud set



752 1 LOT OF ENDMILLS (16)



755 1 LOT OF ENDMILLS (in one box)









764 1 LOT OF ENDMILLS (in two boxes)





769 1 LOT T.S. DRILLS (12)

770 1 LOT T.S. DRILLS (24)

771 1 LOT OF S.S. DRILLS (in two boxes)

772 1 LOT OF S.S. DRILLS (in two boxes)

773 1 LOT OF LONG DRILLS (in one box)

774 1 LOT OF LONG DRILLS (in one box)

775 1 LOT OF T.S. DRILLS (in two boxes)

776 1 LOT OF T.S. DRILLS (in two boxes)

777 1 LOT OF T.S. DRILLS (in one row)

778 1 LOT OF T.S. DRILLS (19)


22


LOT QTY DESCRIPTION







786 1 LOT OF T.S. DRILLS (in one opening)



789 1 LOT OF T.S. DRILLS (in one box)

790 1 LOT OF T.S. DRILLS (in seven boxes)

791 1 LOT OF DRILLS (in six boxes)

792 1 LOT OF TAPS (in one box)

793 1 LOT OF TAPS (in two boxes)

794 1 LOT OF TAPS (in one box)

795 1 LOT OF TAPS (in four boxes)



798 1 LOT OF TAPS (in two boxes)

799 1 LOT OF REAMERS (in two boxes)

800 1 LOT OF KEY CUTTERS (in two boxes)

801 1 LOT OF CUTTING TOOLS (in six boxes)

802 1 LOT OF CUTTING TOOLS (in three boxes)

803 1 LOT OF CUTTING TOOLS (in two boxes)

804 1 LOT OF REAMERS (in three boxes)

805 1 LOT OF REAMERS (in six boxes)

806 1 LOT OF MILLING CUTTERS

807 1 LOT CONSISTING OF: carbide tipped & high speed cutting tools

808 1 LOT OF SHELVES (2), w/tooling

809 1 LOT OF TOOLING (on one skid)

810 1 LOT OF TOOLING (on one skid)

811 1 LOT OF WORKTABLES (10) (not to be removed until empty)

812 1 INTERCHANGEABLE MICROMETER SET, STARRETT, 54" to 60"

813 1 LOT OF O.D. MICROMETERS (2), MITUTOYO

814 1 LOT OF O.D. MICROMETERS (2), MITUTOYO

815 1 LOT OF O.D. MICROMETERS (2), 12" to 16"

816 1 LOT OF O.D. MICROMETERS (4)

817 1 O.D. MICROMETER, STARRETT, 16" to 20"

817A 1 LOT OF MICROMETER STANDARDS







824 1 LOT OF BLADE MICROMETERS (4): 3" to 4" (2) & Mitutoyo 2" to 3"

23


LOT QTY DESCRIPTION

825 1 LOT OF O.D. DIAL MICROMETERS (6)

826 1 LOT OF I.D. MICROMETERS (2)

827 1 LOT OF ANVIL MICROMETERS (3)

828 1 DEPTH GAUGE, FOWLER

829 1 DEPTH MICROMETER, STARRETT

830 1 LOT OF DEPTH MICROMETERS (2), STARRETT



833 1 DEPTH GAUGE, SCHERR TUMICO

834 1 HARDNESS TESTER, ROCKWELL

835 1 HARDNESS TESTER, ROCKWELL

836 1 SURFACE PLATE, 60" x 36" x 6", black granite, w/stand

837 1 SURFACE PLATE, 36" x 24" x 5", black granite

838 1 LOT OF INSPECTION (under one bench)

839 1 LOT OF GAUGES (under one bench)

840 1 I.D. MICROMETER, STARRETT

841 1 LOT OF END MEASURING RODS



844 1 LOT OF I.D. MICROMETERS (2), STARRETT

845 1 LOT OF I.D. MICROMETERS (2), STARRETT, 4" to 40"

846 1 LOT OF I.D. MICROMETERS (in four boxes)

847 1 VERNIER CALIPER, STARRETT 74"





852 1 VERNIER CALIPER, MITUTOYO 24"

853 1 LOT OF VERNIER CALIPERS (2), 14"

854 1 LOT OF DIAL CALIPERS (3), 6"

855 1 GAUGE BLOCK SET, HOKE STYLE 36

856 1 LOT CONSISTING OF: tachometer & fluke meter

857 1 CHART RECORDER, HONEYWELL

858 1 HAND VIBROGRAPH, DAVEY

859 1 TEMPERATURE CALIBRATOR, JOFRA MDL. 600S

860 1 OSCILLOSCOPE, LEADER MDL. LBO-2060

861 1 BOLT TENSION TESTER SKIDMORE WILLIAMS MDL. M

862 1 BOLT TENSION TESTER SKIDMORE WILLIAMS MDL. M

863 1 DIAL BORE GAUGE, FEDERAL .0001"

864 1 LOT OF PRECISION STRAIGHT EDGES

865 1 LOT OF DIAL GAUGES

866 1 LOT OF PRECISION SQUARES (2)

867 1 STEEL TABLE, 122" x 61"

868 1 CABINET, w/thread & gauges

869 1 LOT OF FIXTURES (2)

870 1 A-FRAME RACK

871 1 LOT OF SHELVING SECTIONS (14), w/hardware

872 1 TABLE, w/steel parts & bolts

24


LOT QTY DESCRIPTION

873 1 LOT CONSISTING OF: aluminum & steel

25

Documents

HARDIE-TYNES CO., INC. CATALOG - VIHN.net