7
Topic: Introduction to Computer Parts of a Computer Personal Computer System Computer System – usually refers to a computer and all of the input, output, and storage devices that are connected to it. Input Devices  Keyboard – the primary input device  Pointing Devices – such mouse, joystick and game controller ( i.e WII controller) – an alternative input device to manip ulate on-screen graphical objects and controls.   Scanner – allows a user to scan hard documents, pictures, or graphics to view on a computer   Digital Camera – are used to take pictures which can be used directly by a computer   Microphone – used to put sound into a computer and this needs sound recording software  CD/ DVD ROM – a drive that uses laser te chnology to read data that is permanently stored on computer or audio CDs Output Devices – used to display information on a screen, can cr eate printed copies or generate a sound  Monitors/ Display Device – a separate monitor or a flat panel LC D (liquid crystal display) screen  Printer – an output device that produces computer-generated text or graphical images on paper  o Dot Matrix o Ink Jet o Laser  Speakers – Desktop computer’s built-in speakers are mostly limited to playing beeps  Sound Card – a small circuit board, is necessary for high-quality music, narration, and sound effects.  CD Writers – can be used to create and copy CDs  Modem – can be used to e stablish an internet connection using a standard telephone line Common I/O Peripherals  Keyboard  Mouse  Monitor  Hard disk  Printer Other I/O Devices  CD-ROM Drive  Modem  Sound Card  Scanner

Handout - Grade 7 - ICT - Parts of a Computer.pdf

Embed Size (px)

Citation preview

7/27/2019 Handout - Grade 7 - ICT - Parts of a Computer.pdf

http://slidepdf.com/reader/full/handout-grade-7-ict-parts-of-a-computerpdf 1/6

Topic: Introduction to ComputerParts of a Computer

Personal Computer System

Computer System – usually refers to a computer and all of the input, output, and storage devices that are connected to it.

Input Devices

  Keyboard – the primary input device 

  Pointing Devices – such mouse, joystick and game controller ( i.e WII controller) – an alternative input

device to manipulate on-screen graphical objects and controls. 

  Scanner – allows a user to scan hard documents, pictures, or graphics to view on a computer 

  Digital Camera – are used to take pictures which can be used directly by a computer 

  Microphone – used to put sound into a computer and this needs sound recording software 

  CD/ DVD ROM – a drive that uses laser technology to read data that is permanently stored on computer

or audio CDs 

Output Devices – used to display information on a screen, can create printed copies or generate a sound

  Monitors/ Display Device – a separate monitor or a flat panel LCD (liquid crystal display) screen   Printer – an output device that produces computer-generated text or graphical images on paper 

o  Dot Matrix

o  Ink Jet

o  Laser

  Speakers – Desktop computer’s built-in speakers are mostly limited to playing beeps 

  Sound Card – a small circuit board, is necessary for high-quality music, narration, and sound effects. 

  CD Writers – can be used to create and copy CDs

  Modem – can be used to establish an internet connection using a standard telephone line

Common I/O Peripherals

  Keyboard

  Mouse

  Monitor

  Hard disk

  Printer

Other I/O Devices

  CD-ROM Drive

  Modem

  Sound Card

  Scanner

Grade 7 - Information and Communication Technology Page 1 of 6

7/27/2019 Handout - Grade 7 - ICT - Parts of a Computer.pdf

http://slidepdf.com/reader/full/handout-grade-7-ict-parts-of-a-computerpdf 2/6

Storage Devices

  Computer System Unit – the case that holds the main circuit boards, microprocessor, power supply, and

storage devices 

  Hard Disk Drive (HDD) – a storage device that can store billions of character of data and is usually

mounted inside the computer’s system unit 

  Floppy Disk Drive – reads data from and writes data to floppy disks 

  Storage Component

  Memory

o  Random Access Memory (RAM) – is a type of computer memory chip that allows instructionsand data to be stored, changed and retrieved by the user 

o  Read Only Memory (ROM) – is a memory chip that allows only readout capability

o  Programmable Read Only Memory (PROM) – enables the user to add special information to the

ROM supplied by the manufacturer as part of the system

o  Virtual Memory – is an imaginary memory area supported by the software in conjunction with

the hardware.

  Mass Storage Device

o  Floppy Disks 

o  Compact Disks (CD)/ Digital Videodisk (DVD) 

o  Zip Disk

o  Flash Disk/ Pen Drive

Topic: History of Computer Abacus

-  ultimate ancestor of today’s computer

-  Became the arithmetic tool of early merchant

-  The only relation that can be claimed between the abacus and computer is that they are both used to aid in

handling numerical/logical computations.

Charles Babbage

-  Called the “Father of Computing”

-  Invented the Analytical and Difference Engines

-  Born on December 26, 1791 in Teignmouth, Devonshire in the UK

-  Had an interest in various fields, from statistics to philosophy and religion to machines, having accredited tohim numerous publications in these fields.

-  His conceptualization of his engines began with an analysis of the calculations of tables of Greenwich star

positions

Difference Engine

-  Conceived to perform quick tabular calculations, the workings if which were based on the Methods of 

Differences, an algorithm that lent itself to the easy creation of a wide range of mathematical table

-  Was powered by steam

-  Embodied the basic concepts and elements of a modern general-purpose computer

Analytical Engine

-  Utilized I/O media called Jacquard punched cards, originally used to lay down thread arrangements in weaving

-  Used the punch cards for storing operating instructions (programs), and would have been able to store around1,000 numbers of up to 50 decimal places

-  Also allowed output devices for displaying results

Generation of Computer

The First Generation

-  Computers that were based on the use of wired circuits containing vacuum tubes, and which utilize punch

cards as the main storage medium and designed for a specific task.

-  Used binary codes of “machine language”

o  Electronic Numerical Integrator and Computer (ENIAC), a hulk of machinery consist of 18,000 vacuum

tubes, 70,000 resistors, and 5 million soldered joints, and occupied a space equal to a small warehouse.

o  Electronic Discrete Variable Automatic Computer (EDVAC), a pioneer in implementing von Neumann’s

architecture, the key to which was the Central Processing Unit (CPU), which allowed all computer

functions to be coordinated through a single source.

Example of Computer from the First Generation (1940-1956):

  ABC Computer (1942) – John Atanasoff & Clifford Berry 

  Z3 (1941) – Konrad Zuse 

  Colossus computer (1944) – Tommy Flowers 

  Harvard Mark I Computer (1944) – Howard Aiken & Grace Hopper

  ENIAC 1 Computer (1946) – John Presper Eckert & John W. Mauchly

Grade 7 - Information and Communication Technology Page 2 of 6

7/27/2019 Handout - Grade 7 - ICT - Parts of a Computer.pdf

http://slidepdf.com/reader/full/handout-grade-7-ict-parts-of-a-computerpdf 3/6

  Manchester Baby Computer & The Williams Tube (1948) – Frederic Williams & Tom Kilburn 

  LEO I/ Lyons Electronic Office I (1951) – Oliver Standingford & Raymond Thompson of J. Lyons and Co. 

  UNIVAC (1951) – J ohn Presper Eckert & John W. Mauchly

The Second Generation (1956-1963)

-  Development of the “transistor”

o  Smaller size and increase reliability

o  Resulted to a smaller and smaller computers, which were faster and more energy efficient than their

predecessorso  The first transistor computer was created at the University of Manchester in 1953.

-  The transistor was far superior to the vacuum tube, allowing computers to become smaller, faster, cheaper,

more energy-efficient and more reliable than their first-generation predecessors. 

-  Used a more specialized with easier abbreviated programming codes called “assembly language”

Example of Computer from the Second Generation (1955-1960):

  IBM 1401

The Third Generation (1964-1971)

-  “integration”, a process in which numerous electronic components are brought together to compose a

system unit (an integrated circuit) that combines them in a dynamic, coordinated manner

DID YOU KNOW...?  

  An integrated circuit (IC ) is a small electronic device made out of a semiconductor material.

  The first integrated circuit was developed independently in the 1950s by

  Jack Kilby of Texas Instruments, and

  Robert Noyce of Fairchild Semiconductor  

Example of Computer from the Second Generation (1955-1960):

  IBM’s System/360

The Fourth Generation (1971 – present)

-  Development of user-friendly software packages that offered non-technical users many of the advantages of 

computer applications

-  Characterized the application of advanced engineering techniques that allow very-large-scale-integration

(VLSI), and ultra-large-scale-integration (ULSI), which allow for the placement of millions of electronic

components in a single chip.

-  The first single-chip CPU, or a microprocessor, was Intel 4004.

Types of Computers and Example Under Fourth Generation Computer

1.  First Generation of Microcomputers (1971 – 1976)

  CTC Datapoint 2200

-  based on a multi-chip CPU design 

-  its multi-chip CPU architecture actually became a basis for the x86 architecture later

used in IBM PC   Micral N

-  uses Intel 8008 microprocessor 

  MOS Technology KIM-1

  Altair 8800

  Apple I

  Altair 8800

2.  Second Generation Microcomputers (1977 – present)

  Commodore PET

  Apple II

  80s the IBM PC

3.  Graphical User Interface (GUI)

-  Doug Engelbart and his team at the Stanford Research Lab developed the first mouse, and a

graphical user interface, demonstrated in 1968.

-  Xerox PARC research center, which in 1973 developed Xerox Alto, the first computer with a mouse-

driven GUI

-  Introduction of “DOS” or “Disk Operating System” to the IBM PC by Microsoft  

  Altair 8800

Grade 7 - Information and Communication Technology Page 3 of 6

7/27/2019 Handout - Grade 7 - ICT - Parts of a Computer.pdf

http://slidepdf.com/reader/full/handout-grade-7-ict-parts-of-a-computerpdf 4/6

   Apple introduced the Macintosh, 1984, the first mass-market computer with a graphical user

interface and a mouse.

4.  Portable Computers

  Dynabook

  Laptop-like portable computer 

  Developed at Xerox PARC by Alan Kay  

  Intended it for children. 

  Xerox Notetakero  First portable computer

o  Only 10 were produced

  Osborne 1 (1981)

o  First commercialized laptop

o  With a small 5″ CRT monitor and a keyboard that sits inside of the lid when closed 

o  It ran CP/M (the OS that Microsoft bought and based DOS on)

  Apple’s Powerbooks

o  The first portable computers which resemble modern laptops in features

The Fifth Generation

-  Computers that can understand human speech, can recognize patterns faces and complex images

o  Artificial intelligence

o  Expert system

o  Natural language processing

For the brief timeline of computers, visit http://www.webopedia.com/quick_ref/timeline.asp for more more details.

Topic: Computer Application 

  Business – they use computers to store information, easy interface with customers, and facilitate

processing and presentation of data

  Mathematics and Science – Watson and Crick’s discovery of the structure of the DNA

  Engineering – degrees of miniaturization and integration have multiplies n-fold

 Medicine – more reliable artificial hearts are being offered to those with heart problems

  Education – ease of use in the creation of presentation materials and documents

  Entertainment – interactive games and virtual simulations, computer-generated effects

Topic: Computer Basics

-  A device that accepts input, processes data, stores data, and produces output, all according to a series of stored

instructions

-  Information Processing Cycle

o  Accepts data – input  

o  Process data – processing 

o  Produces output – output  

o  Stores result – storage 

-  Beginning terms:

o  Hardware – these are the physical part of a computer

o  Software – these are the instructions or programs that commands the computer what to do

o  Data – individual facts such as name, price, quantity ordered

o  Information - these are information that were sent into a useful form like a complete mailing address

o  Default – original settings

-   A computer is powerful because of three functions that it has:

o  Speed , because it does billions of actions per second

o  Reliability , because most failures are done by human errors, one way or another

o  Storage, because it can store huge amount of data

Personal Computer Systems

-  computer system usually refers to a computer and all of the input, output, and storage devices that areconnected to it

-  Input Devices

o  Keyboard  -the primary input device

o  Pointing devices such as mouse, joystick, and game controller - an alternative input device to

manipulate on-screen graphical objects and controls

o  Scanner  -allows a user to scan hard document, pictures, or graphics to view on a computer

o  Digital Cameras -are used to takes pictures which can be used directly by a computer

o  Microphone -used to put sound into a computer and this needs sound recording software

Grade 7 - Information and Communication Technology Page 4 of 6

7/27/2019 Handout - Grade 7 - ICT - Parts of a Computer.pdf

http://slidepdf.com/reader/full/handout-grade-7-ict-parts-of-a-computerpdf 5/6

o  CD/DVD ROM -a drive that uses laser technology to read data that is permanently stored on computer

or audio CDs

-  Output Devices – used to display information on a screen, can create printed copies or generate a sound

o  Monitors / Display Device -a separate monitor or a flat panel LCD (liquid crystal display) screen

o  Printer  -an output device that produces computer-generated text or graphical images on paper

  Dot Matrix printer uses metal pins to strike an inked ribbon that make dots on a paper and is

considered as the lowest print quality.

  Ink Jet printers use drops of magnetic ink that produces highest quality print at a reasonable price.

  Laser printers use a toner stick where the dots are made and produce the highest quality printoutand are the most expensive printer.

o  Speakers. Some are built-in speakers that are mostly limited to playing beeps.

o  Sound card , a small circuit board, is necessary for high-quality music, narration, and sound effects.

o  CD-writers are used to create and copy data to CDs.

o  Modem is used to establish an internet connection using a standard telephone line.

-  Storage Devices

o  Computer System Unit  -the case that holds the main circuit boards, microprocessor, power supply, and

storage devices

o  Hard Disk drive -a storage device that can store billions of characters of data and is usually mounted

inside the computer’s system unit

o  Floppy Disk drive -reads data from and writes data to floppy disks

o  Optical Media 

  Compact Disk(CD) 

  Digital Videodisk(DVD) 

o  Flash Disk - is a data storage device that includes flash memory with an integrated Universal Serial Bus

(USB) interface

Computer Terminologies 

  Data -the symbols that represent people, events, things, and ideas

  Information -data presented in a format that people can understand and use

  Bit -binary codes used by computers consisting of either 1 or 0  Byte -eight bits and are used to represent one character

  Character -may be a letter, number, or punctuation mark

  File - a named collection of data that exists on a storage medium, such as a hard disk, a floppy disk, or a CD

  Data file -files which are regarded as passive, the data does not instruct the computer to do anything

  Executable file -files which are considered as active, the instructions stored in the file cause the computer to

carry out some action

  Data refers to the symbols that represent facts, objects, and ideas.

  Computers manipulate data in various ways, and this manipulation is referred to as processing.

Grade 7 - Information and Communication Technology Page 5 of 6

7/27/2019 Handout - Grade 7 - ICT - Parts of a Computer.pdf

http://slidepdf.com/reader/full/handout-grade-7-ict-parts-of-a-computerpdf 6/6

  Simply called a program, or a computer program, is the series of instructions that tell a computer how to carry

out processing tasks.

  These programs form the software that sets up computer to do a specific task. Some of the ways that a

computer can process data include modifying documents and pictures, sorting lists of words and numbers,

drawing graphs, and performing calculations.

  Most processing takes place in a component called the central processing unit (CPU), and is sometimes

described as the “brain” of the computer.

  Memory is an area of a computer that temporarily holds data that is waiting to be processed, stored, or output.

  Storage is the area where data can be left on a permanent basis when it is not immediately needed forprocessing is called.

  The results produced by a computer are known as the output . Examples of these are reports, documents, music,

graphs, and pictures. An output device displays, prints, or transmits the results of processing.

Information Size Measurements 

-  Kilobyte (KB)

  One kilobyte equals about 1024 bytes

  1KB is about 140 words, about a half page of typed double-spaced text (words only)

-  Megabyte (MB)

  One megabyte equals about 1000 KB

  One megabyte equals about 1,000,000 bytes

  One megabyte equals about 500 pages of text, or one large book

-  Gigabyte (GB)

  One gigabyte equals about 1000 MB

  One gigabyte equals about 1,000,000 KB

  One gigabyte equals about 1,000,000,000 bytes

  One gigabyte equals over 1,000 books of text

What’s the significance of a computer’s ability to store instructions?

In a modern computer, the concept of a stored program means that a series of instructions for a computing task

can be loaded into a computer’s memory. These instructions can easily be replaced by a different set of instructions

when it is time for the computer to perform a different task.

The stored program idea allows a user to use computer for one task, like sending an email message, and theneasily switch to a different type of computing task such as editing a photo. It is the single most important characteristic

that distinguishes a computer from other simpler and less versatile devices, such as hand-held electronic dictionaries,

singing fish and calculators.

Grade 7 - Information and Communication Technology Page 6 of 6