Embed Size (px)
Citation preview
ELECTRIC CHAIN HOISTS
HAND CHAIN HOISTS & EQUIPMENT
®
HAND CHAIN HOISTS
®
ACCO Material Handling Solutions76 Acco Drive, Box 792, York, PA 17405-0792717-741-4863, 800-967-7333, FAX 800-715-8897E-mail: [email protected]
© 2008 FKI Industries Inc., Printed in the USABulletin PD231001/08 RMC 5M
®
Dimensions in inches (Nominal).Chain Overhaul
Pull To Lift To Lift LoadModel Capacity Lift Full Load Dimensions Parts of One Ft. Net Wt.
Number (Tons) (Feet)* (Lbs.) A B C Load Chain (Ft.) (Lbs.)1360010 1/2 10 53 5-29/32 6-1/16 12-13/32 1 26 251360020 1/2 20 53 5-29/32 6-1/16 12-13/32 1 26 391360030 1 10 73 5-3/4 6-3/16 12-13/32 1 38 261360040 1 20 73 5-3/4 6-3/16 12-13/32 1 38 401360050 2 10 75 7-1/32 8-1/32 14-31/32 1 51 491360060 2 20 75 7-1/32 8-1/32 14-31/32 1 51 631360070 3 10 77 5-3/4 8-1/8 18-23/32 2 117 511360080 3 20 77 5-3/4 8-1/8 18-23/32 2 117 711360090 5 10 86 7-1/32 10-3/8 25 2 166 901360100 5 20 86 7-1/32 10-3/8 25 2 166 121
A B
C
ACCOLIFT portable, lightweight hand hoists are compact and provide adependable working tool for: industrial maintenance, construction sites,machine shops, and production situations where parts need to be positionedaccurately but infrequently.
Construction Features:
Hooks: All hooks are drop forged, heattreated steel with spring type latches.Both hooks rotate 360˚ for easy rigging.
Mechanical Load Brake: Can hold acapacity load stationary at any position.
Hand Chain: Electric welded, close linkcoil chain, accurately and uniformly sizedto seat properly in handwheel pockets.
Load Sheaves: Deep cast pocketsprecisely fit the load chain. Load shaftsare supported by prelubricated bearingsfor smooth operation.
Load Chain: Electric welded alloy steelchain is heat treated for wear resistanceand strength. Accurately and uniformlysized to seat properly in load sheaves.
Frame: Fabricated rolled steel plate.
Covers: Protective steel covers caneasily be removed for inspection andmaintenance.
*Other lifts available.
LEVER HOISTS
ACCOLIFT® Hand Chain Hoists
Lightweight, portable, chain type lever operated puller. Increases aworker's efficiency in pulling, lifting, lowering, moving and skidding objectsin industrial maintenance, construction and utility company applications.Minimal effort is required to move tons. The short handle and short strokeare designed to operate in tight places. Excellent for stretching cable andfencing, positioning machinery and building components.
AB
C
D
E
Frame/Side Plate: Rugged, lightweightsteel design supports and protectsinternal mechanism.
Lever/Lever Block: Designed andconstructed to be easily operated by oneperson. Helps absorb the shock of theload. Can be easily disassembled formaintenance.
Operation: Two levers and a knob controlthe operation of the ACCOLIFT LeverHoist. The lifting "lock" lever can only beengaged when the hoist chain is slack (notunder load). The grip ring is then pulled toengage the load sheave. Choose "Up" or"Down" position on the handle to raise orlower the load.
Gears: Six tooth pinion gear and fourpocket load sheave makes operationeasy. Gears are permanently lubricated.
Mechanical Load Brake: Brake can holda full capacity load stationary in anyposition. Load is not transferred back tohandle during handle advancement.
Load Chain: Electric welded alloy steelchain is heat treated for wear resistanceand strength. Accurately and uniformlysized to seat properly in load sheaves.
Load Block: Supports the suspensionhook and allows it to rotate 360˚ undercapacity loads.
Hooks: All hooks are drop forged. Heattreated steel with spring type latches.Both hooks rotate 360˚ for easy rigging.
Construction Features:
Dimensions in inches (Nominal).Pull To Lift
Model Capacity Lift Full Load Dimensions Net Wt.Number (Tons) (Feet) (Lbs.) A B C D E (Lbs.)1150010 3/4 5 40 6-1/2 5-7/8 12-7/8 14-5/8 1-3/8 221150110 3/4 10 40 6-1/2 5-7/8 12-7/8 14-5/8 1-3/8 251150210 3/4 15 40 6-1/2 5-7/8 12-7/8 14-5/8 1-3/8 281150020 1-1/2 5 40 6-1/2 5-7/8 12-7/8 14-5/8 1-3/8 221150120 1-1/2 10 40 6-1/2 5-7/8 12-7/8 14-5/8 1-3/8 251150220 1-1/2 15 40 6-1/2 5-7/8 12-7/8 14-5/8 1-3/8 281150030 3 5 73 7-5/8 7-1/8 15-5/8 14-5/8 1-3/4 361150040 6 5 77 7-5/8 9-1/4 23-3/8 14-5/8 1-7/8 59
Models available with lifts over 5 feet.
ELECTRIC CHAIN HOISTS PLAIN TROLLEYSStandard Features:
Dual Brake SystemDisc type motor brake working with a mechanical loadbrake provides load lowering control. Electric brakedesigned for easy access and simple adjustment.
Upper and Lower Limit SwitchPrevents overwinding by stopping operation in the case ofoverlifting or overlowering.
Overload AlertInstalled as load detecting safety device to preventoverload for greater hoist longevity.
Push Button ControlCompact design to enable one-handed operation. RatedNEMA 4 protection. Emergency stop button included.Push button cable has strain relief to prevent cabledamage.
Electric Control PanelSingle speed hoists are re-connectable for 208-230-460 powersupply. Controls are housed in a NEMA12 enclosure. Controltransformer output is 115/1/60. Complete with preventiveincorrect phase limiter which automatically checks for incorrectphase sequence. A magnetic mainline contactor is includedwith all hoists. Available in Variable Frequency Drive (VFD) forall motions. VFD is programmed 2 speed operation. Standardpower supply cord is 10 feet.
Heavy-Duty Hoist MotorHigh torque motor with class B motor insulation. Motor is rated30-minute duty and includes standard thermal motorprotection.
Motorized TrolleyTrolley is adjustable for a range of flange widths. Motorincludes disc type brake. Side guide rollers are included topromote smooth trolley motion and to minimize wheel andbeam wear.
Load Sheave / Chain GuideFull floating chain guide that assures proper engagement ofchain on load sheave. Features 4 or 5 pockets for betterdistribution of the load.
ACCOLIFT® Electric Chain Hoists - Hook Suspension ACCOLIFT® Electric Chain Hoists - Motorized Trolley
Dimensions in inches (Nominal).Model Number A B C C2* D E F H L M2130020 22.5 11.7 10.8 - 14.2 6.7 7.5 22 15.9 1.72130030 22.5 11.7 10.8 12.8 14.2 6.7 7.5 22 15.9 1.72130040 22.5 11.7 10.8 - 11.8 8.6 3.2 32 19.3 2.12130050 26.1 13.7 12.3 13.5 16.9 7.8 9.1 27 19 2.12130060 26.1 13.7 12.3 13.5 16.9 10.2 6.7 36 21.7 2.42130070 26.1 13.7 12.3 13.5 16.9 10.7 5.9 42 22.8 2.8
E
D
E F
D
F
H
M
H
L
M
A
B
C2
C
A
B C
ABC
A
BC
FG
FG
I J
I
L
J
D E
D E
L
K
K
H
H
M
M
Available for hook suspension andmotorized trolley applications.
®®®
Single Speed / Motorized Trolley.Dimensions in inches (Nominal).
Lifting Trolley LoadPower Lift in Speed Speed Chain Net Wt.
Model Number Capacity Supply Feet Reeving FPM FPM Diameter (Lbs.)2130120 1 20 1 17 36 0.280 2382130130 1 20 1 27 36 0.280 2382130140 2 20 2 13 36 0.280 2932130150 2 20 1 27 36 0.441 3882130160 3 20 2 17 33 0.374 5072130170 5 20 2 11 33 0.441 589
Inverter Control / Motorized Trolley.Dimensions in inches (Nominal).
Lifting Trolley LoadPower Lift in Speed Speed Chain Net Wt.
Model Number Capacity Supply Feet Reeving FPM FPM Diameter (Lbs.)2130130-VFD-230 1 230-3-60 20 1 21/7 50/17 0.280 2482130130-VFD-460 1 460-3-60 20 1 21/7 50/17 0.280 2482130150-VFD-230 2 230-3-60 20 1 21/7 50/17 0.441 3982130150-VFD-460 2 460-3-60 20 1 21/7 50/17 0.441 3982130160-VFD-230 3 230-3-60 20 2 15/5 50/17 0.374 5172130160-VFD-460 3 460-3-60 20 2 15/5 50/17 0.374 5172130170-VFD-230 5 230-3-60 20 2 11/4 50/17 0.441 5992130170-VFD-460 5 460-3-60 20 2 11/4 50/17 0.441 599
Load ChainLoad chain is case hardened and has ahigh resistance to wear and corrosion.All hoists are stocked with 20 feet of lift.Longer lifts available per requirement.
HooksLoad hook is a forged carbon steelhook with a heavy-duty hook latch.Thrust bearing in hook allows 360˚rotation to prevent twisting of loadchain. Top hook, for hook suspendedhoists, is rigid.
Chain ContainerMolded with thick polypropylenematerial to securely contain the chain.
Gear Box / Oil LubricationSpecial alloy steel helical and spur gearsystem. Oil lubrication is easilyaccessible from top of hoist.
Single Speed / Hook Suspension.Dimensions in inches (Nominal).
Lifting LoadPower Lift in Speed Chain Net Wt.
Model Number Capacity Supply Feet Reeving FPM Diameter (Lbs.)2130020 1 20 1 17 0.280 1652130030 1 20 1 27 0.280 1652130040 2 20 2 13 0.280 1982130050 2 20 1 27 0.441 2822130060 3 20 2 17 0.374 3482130070 5 20 2 11 0.441 388
Inverter Control / Hook Suspension.Dimensions in inches (Nominal).
Lifting LoadPower Lift in Speed Chain Net Wt.
Model Number Capacity Supply Feet Reeving FPM Diameter (Lbs.)2130030-VFD-230 1 230-3-60 20 1 21/7 0.280 1702130030-VFD-460 1 460-3-60 20 1 21/7 0.280 1702130050-VFD-230 2 230-3-60 20 1 21/7 0.441 2872130050-VFD-460 2 460-3-60 20 1 21/7 0.441 2872130060-VFD-230 3 230-3-60 20 2 15/5 0.374 3532130060-VFD-460 3 460-3-60 20 2 15/5 0.374 3532130070-VFD-230 5 230-3-60 20 2 11/4 0.441 3932130070-VFD-460 5 460-3-60 20 2 11/4 0.441 393
C2
* Inverter Control Models only.
Dimensions in inches (Nominal).Model Number A B C C2* D E F G H I J J2* K L M
2130120 20.9+*2B 11.6+*B 9.3+*B - 6.7 7.5 11.7 4.4 23 11.7 10.8 - 5.2 15.6 1.72130130 20.9+*2B 11.6+*B 9.3+*B 11.3+*B 6.7 7.5 11.7 4.4 23 11.7 10.8 12.8 5.2 15.6 1.72130140 22+*2B 12.1+*B 9.9+*B - 8.9 5.3 12.4 4.9 32 11.7 10.8 - 5.1 18.8 2.12130150 22+*2B 12.1+*B 9.9+*B 11.9+*B 7.8 9.1 12.4 5 27 13.7 12.3 13.5 5.1 18.1 2.12130160 22.8+*2B 12.9+*B 9.9+*B 11.9+*B 10.2 6.6 14.2 5.5 35 13.7 12.3 13.5 5.8 20.9 2.42130170 24.2+*2B 14.3+*B 9.9+*B 11.9+*B 10.7 5.9 16.1 6.1 42 13.7 12.3 13.5 6.1 23.2 2.8
208/230/460-3-60
208/230/460-3-60 J2
J2
C2
* Inverter Control Models only.The figure *B can be calculated here after: *B=1/2 x width of the traversing rail.
ACCOLIFT Trolleys are light and easy to adapt to a wide range of beamwidths. A perfect match to make the ACCOLIFT Electric or Hand Chain Hoistand its load horizontally mobile.
WF
A
E
B
G
H
C
D
Construction Features:
Side Frame: Side plates are ruggedrolled steel.
Wheels: Crown tread allows operationon tapered or flat flange beams.
Bearings: Shielded, lifetimelubricated, single row ball bearings.
Dimensions in inches (Nominal).W
BeamModel Capacity Width H Min. Net Wt.
Number (Tons) Min.-Max. A B C D E F G Min. Radius (Lbs.)1650010 1/2 3-5 8-1/8 6-7/8 4-3/4 1-7/8 2-1/4 1-1/8 3-1/2 4 36 141650020 1 3-5 8-1/8 9-1/8 4-3/4 1-7/8 3-1/4 1-1/8 4-3/4 5 52 221650030 2 4-6 9-1/2 10-3/4 6-7/8 2-3/8 4 1-3/8 5-1/2 6 59 411650040 3 4-6 10-3/8 12-1/4 7-3/8 2-7/8 4-1/2 1-7/8 6-1/2 7 79 581650050 5 5-7 11-5/8 13-7/8 8-7/8 3-1/4 5 2-1/8 7-1/4 10 103 97
WARNINGEquipment described herein is not designed for, and should not beused for lifting, supporting, or transporting humans. Modifications toupgrade, rerate, or otherwise alter the hoist or crane equipment shallbe authorized only by the original manufacturer or qualifiedprofessional engineer. Failure to comply with any one of thelimitations noted herein may result in serious bodily injury.
WARRANTYAll equipment is covered by the following warranties: The Sellerwarrants to the original using Buyer thereof that the goods sold underthis agreement are free from defects in workmanship and materialsfor a period of one year from the date of shipment to the using Buyer.No other express warranties are given and no affirmation of Seller orSeller's agents, by word or action, shall constitute a warranty. Anyvariations in details between the goods quoted herein and thosecovered in Buyer's specifications are due to standards ofmanufacture not to be construed as exceptions to the specifications.
C2
Dimensions
ELECTRIC CHAIN HOISTS PLAIN TROLLEYSStandard Features:
Dual Brake SystemDisc type motor brake working with a mechanical loadbrake provides load lowering control. Electric brakedesigned for easy access and simple adjustment.
Upper and Lower Limit SwitchPrevents overwinding by stopping operation in the case ofoverlifting or overlowering.
Overload AlertInstalled as load detecting safety device to preventoverload for greater hoist longevity.
Push Button ControlCompact design to enable one-handed operation. RatedNEMA 4 protection. Emergency stop button included.Push button cable has strain relief to prevent cabledamage.
Electric Control PanelSingle speed hoists are re-connectable for 208-230-460 powersupply. Controls are housed in a NEMA12 enclosure. Controltransformer output is 115/1/60. Complete with preventiveincorrect phase limiter which automatically checks for incorrectphase sequence. A magnetic mainline contactor is includedwith all hoists. Available in Variable Frequency Drive (VFD) forall motions. VFD is programmed 2 speed operation. Standardpower supply cord is 10 feet.
Heavy-Duty Hoist MotorHigh torque motor with class B motor insulation. Motor is rated30-minute duty and includes standard thermal motorprotection.
Motorized TrolleyTrolley is adjustable for a range of flange widths. Motorincludes disc type brake. Side guide rollers are included topromote smooth trolley motion and to minimize wheel andbeam wear.
Load Sheave / Chain GuideFull floating chain guide that assures proper engagement ofchain on load sheave. Features 4 or 5 pockets for betterdistribution of the load.
ACCOLIFT® Electric Chain Hoists - Hook Suspension ACCOLIFT® Electric Chain Hoists - Motorized Trolley
Dimensions in inches (Nominal).Model Number A B C C2* D E F H L M2130020 22.5 11.7 10.8 - 14.2 6.7 7.5 22 15.9 1.72130030 22.5 11.7 10.8 12.8 14.2 6.7 7.5 22 15.9 1.72130040 22.5 11.7 10.8 - 11.8 8.6 3.2 32 19.3 2.12130050 26.1 13.7 12.3 13.5 16.9 7.8 9.1 27 19 2.12130060 26.1 13.7 12.3 13.5 16.9 10.2 6.7 36 21.7 2.42130070 26.1 13.7 12.3 13.5 16.9 10.7 5.9 42 22.8 2.8
E
D
E F
D
F
H
M
H
L
M
A
B
C2
C
A
B C
ABC
A
BC
FG
FG
I J
I
L
J
D E
D E
L
K
K
H
H
M
M
Available for hook suspension andmotorized trolley applications.
®®®
Single Speed / Motorized Trolley.Dimensions in inches (Nominal).
Lifting Trolley LoadPower Lift in Speed Speed Chain Net Wt.
Model Number Capacity Supply Feet Reeving FPM FPM Diameter (Lbs.)2130120 1 20 1 17 36 0.280 2382130130 1 20 1 27 36 0.280 2382130140 2 20 2 13 36 0.280 2932130150 2 20 1 27 36 0.441 3882130160 3 20 2 17 33 0.374 5072130170 5 20 2 11 33 0.441 589
Inverter Control / Motorized Trolley.Dimensions in inches (Nominal).
Lifting Trolley LoadPower Lift in Speed Speed Chain Net Wt.
Model Number Capacity Supply Feet Reeving FPM FPM Diameter (Lbs.)2130130-VFD-230 1 230-3-60 20 1 21/7 50/17 0.280 2482130130-VFD-460 1 460-3-60 20 1 21/7 50/17 0.280 2482130150-VFD-230 2 230-3-60 20 1 21/7 50/17 0.441 3982130150-VFD-460 2 460-3-60 20 1 21/7 50/17 0.441 3982130160-VFD-230 3 230-3-60 20 2 15/5 50/17 0.374 5172130160-VFD-460 3 460-3-60 20 2 15/5 50/17 0.374 5172130170-VFD-230 5 230-3-60 20 2 11/4 50/17 0.441 5992130170-VFD-460 5 460-3-60 20 2 11/4 50/17 0.441 599
Load ChainLoad chain is case hardened and has ahigh resistance to wear and corrosion.All hoists are stocked with 20 feet of lift.Longer lifts available per requirement.
HooksLoad hook is a forged carbon steelhook with a heavy-duty hook latch.Thrust bearing in hook allows 360˚rotation to prevent twisting of loadchain. Top hook, for hook suspendedhoists, is rigid.
Chain ContainerMolded with thick polypropylenematerial to securely contain the chain.
Gear Box / Oil LubricationSpecial alloy steel helical and spur gearsystem. Oil lubrication is easilyaccessible from top of hoist.
Single Speed / Hook Suspension.Dimensions in inches (Nominal).
Lifting LoadPower Lift in Speed Chain Net Wt.
Model Number Capacity Supply Feet Reeving FPM Diameter (Lbs.)2130020 1 20 1 17 0.280 1652130030 1 20 1 27 0.280 1652130040 2 20 2 13 0.280 1982130050 2 20 1 27 0.441 2822130060 3 20 2 17 0.374 3482130070 5 20 2 11 0.441 388
Inverter Control / Hook Suspension.Dimensions in inches (Nominal).
Lifting LoadPower Lift in Speed Chain Net Wt.
Model Number Capacity Supply Feet Reeving FPM Diameter (Lbs.)2130030-VFD-230 1 230-3-60 20 1 21/7 0.280 1702130030-VFD-460 1 460-3-60 20 1 21/7 0.280 1702130050-VFD-230 2 230-3-60 20 1 21/7 0.441 2872130050-VFD-460 2 460-3-60 20 1 21/7 0.441 2872130060-VFD-230 3 230-3-60 20 2 15/5 0.374 3532130060-VFD-460 3 460-3-60 20 2 15/5 0.374 3532130070-VFD-230 5 230-3-60 20 2 11/4 0.441 3932130070-VFD-460 5 460-3-60 20 2 11/4 0.441 393
C2
* Inverter Control Models only.
Dimensions in inches (Nominal).Model Number A B C C2* D E F G H I J J2* K L M
2130120 20.9+*2B 11.6+*B 9.3+*B - 6.7 7.5 11.7 4.4 23 11.7 10.8 - 5.2 15.6 1.72130130 20.9+*2B 11.6+*B 9.3+*B 11.3+*B 6.7 7.5 11.7 4.4 23 11.7 10.8 12.8 5.2 15.6 1.72130140 22+*2B 12.1+*B 9.9+*B - 8.9 5.3 12.4 4.9 32 11.7 10.8 - 5.1 18.8 2.12130150 22+*2B 12.1+*B 9.9+*B 11.9+*B 7.8 9.1 12.4 5 27 13.7 12.3 13.5 5.1 18.1 2.12130160 22.8+*2B 12.9+*B 9.9+*B 11.9+*B 10.2 6.6 14.2 5.5 35 13.7 12.3 13.5 5.8 20.9 2.42130170 24.2+*2B 14.3+*B 9.9+*B 11.9+*B 10.7 5.9 16.1 6.1 42 13.7 12.3 13.5 6.1 23.2 2.8
208/230/460-3-60
208/230/460-3-60 J2
J2
C2
* Inverter Control Models only.The figure *B can be calculated here after: *B=1/2 x width of the traversing rail.
ACCOLIFT Trolleys are light and easy to adapt to a wide range of beamwidths. A perfect match to make the ACCOLIFT Electric or Hand Chain Hoistand its load horizontally mobile.
WF
A
E
B
G
H
C
D
Construction Features:
Side Frame: Side plates are ruggedrolled steel.
Wheels: Crown tread allows operationon tapered or flat flange beams.
Bearings: Shielded, lifetimelubricated, single row ball bearings.
Dimensions in inches (Nominal).W
BeamModel Capacity Width H Min. Net Wt.
Number (Tons) Min.-Max. A B C D E F G Min. Radius (Lbs.)1650010 1/2 3-5 8-1/8 6-7/8 4-3/4 1-7/8 2-1/4 1-1/8 3-1/2 4 36 141650020 1 3-5 8-1/8 9-1/8 4-3/4 1-7/8 3-1/4 1-1/8 4-3/4 5 52 221650030 2 4-6 9-1/2 10-3/4 6-7/8 2-3/8 4 1-3/8 5-1/2 6 59 411650040 3 4-6 10-3/8 12-1/4 7-3/8 2-7/8 4-1/2 1-7/8 6-1/2 7 79 581650050 5 5-7 11-5/8 13-7/8 8-7/8 3-1/4 5 2-1/8 7-1/4 10 103 97
WARNINGEquipment described herein is not designed for, and should not beused for lifting, supporting, or transporting humans. Modifications toupgrade, rerate, or otherwise alter the hoist or crane equipment shallbe authorized only by the original manufacturer or qualifiedprofessional engineer. Failure to comply with any one of thelimitations noted herein may result in serious bodily injury.
WARRANTYAll equipment is covered by the following warranties: The Sellerwarrants to the original using Buyer thereof that the goods sold underthis agreement are free from defects in workmanship and materialsfor a period of one year from the date of shipment to the using Buyer.No other express warranties are given and no affirmation of Seller orSeller's agents, by word or action, shall constitute a warranty. Anyvariations in details between the goods quoted herein and thosecovered in Buyer's specifications are due to standards ofmanufacture not to be construed as exceptions to the specifications.
C2
Dimensions
