HAMPTONS FENCING...Fencing range - a white PVC fencing system available in full and semi privacy styles. Hamptons Fencing is amazingly cost effective and is visually stunning! hamptons

H A M P T O N S F E N C I N GWhat you’ll find insideFull privacy fencingSemi privacy fencingInstallation guides

V1

2

Panels are flat packed in a box ready for quick and easy assembly.Gates are fully assembled.Posts have pre-punched holes for easy install.

EASY ASSEMBLY

Full privacy with a stylish vertical profile and top/bottom rails for a ‘solid wall’ finish at1800mm high.

Semi privacy features 38x38mm pickets and is ideal for front/boundary fencing at 1200mm high.

FULL PRIVACY AND SEMI PRIVACY OP TIONS No need for painting or staining

like standard white timber fences. The durable PVC finish will not rust or tarnish in an outdoor environment.

NO PAINTING REQUIREDFormulation contains UV inhibitors and Titanium Dioxide additive which provide vital hardiness to withstand weathering and light damage.

UV STABLE PRODUCT

We are excited to release the new Hamptons Fencing range - a white PVC fencing system available in full and semi privacy styles.Hamptons Fencing is amazingly cost effective and is visually stunning!

hamptons fencing system —

› Gates: 1800mm H x 1000mm W› Panels: 1800mm H x 2388mm W

F U L L P R I V A C Y F E N C I N G —Ideal solid wall solution

S E M I P R I V A C Y F E N C I N G —

› Gates: 1200mm H x 1000mm W› Panels: 1200mm H x 2388mm W

1

1

5

6

4

4

3

2

2

1

4

3

3

2

5

6

2

3Top rail (152mm H x 2388mm W x 51mm D)

2 Post top cap

3 Post (2500mm H x 127mm W x 127mm D)

4 U channel (1495mm H x 27mm W x 25mm D)

5 Panel (1565mm H x 289mm W x 22mm D)

6 Bottom rail (152mm H x 2388mm W x 51mm D w/ aluminium insert)

1 Top rail (89mm H x 2388mm W x 51mm D)

2 Post top cap

3 Post (1900mm H x 102mm W x 102mm D)

4 Mid-rail (89mm H x 2388mm W x 51mm D)

5 Pickets (785/1030mm H x 38mm W x 38mm D)

6 Bottom rail (152mm H x 2388mm W x 51mm D w/ aluminium insert)

Ideal for front/boundary fencing

3

Panels can be easily adjusted in width and height.

WIDTH & HEIGHT ADJUSTABLE

Durable and long lasting outdoor material. Does not absorb moisture so will not blister, rot, or peel.

DURABLE PVC CONSTRUCTION

EXTREMELY COST EFFECTIVEAll components available

including panels, gates, base plates, caps and more.

COMPLE TE RANGE

— hamptons fencing system

F U L L P R I V A C Y F E N C I N G —

S E M I P R I V A C Y F E N C I N G —

4

F U L L P R I V A C Y F E N C I N G

Images & drawings are not to scale

TECH SPECS

TECH SPECS

• Horizontal Rails: 2388mmW x 152mmH x 50.8mmD; 2.3mm wall thickness• Bottom rail includes aluminium insert for extra rigidity• Vertical Panels: 1565mmH x 289mmW x 22mmD; 1.3mm wall thickness• Achieves overall panel height of 1800mm• Panel and rails can be easily cut in width and height

• Flat pack kit in a box – easy assembly• White UV stabilised PVC with protective titanium dioxide additives• Panels have stylish shiplap grooves, are tongue & groove and slot neatly into each other

• Bottom rail includes aluminium insert for extra rigidity• Vertical side posts/rails are 1850mmH x 102mmW x 63mmD; 3mm wall thickness• Distance between top & bottom rail is 1800mm • Includes 4 x aluminium internal inserts for rigidity (refer cross hatch area in drawing). Install hinges & latch in these areas for maximum fixing strength• Gate cannot be width or height adjusted

• Fully assembled gate including 2 x flat top caps• White UV stabilised PVC with protective titanium dioxide additives• Vertical panels have stylish shiplap grooves

Full privacy panel kit2388MM WIDE1800MM HIGH

Full privacy gate1000MM WIDE1800MM HIGH

K I T I N C L U S I O N S· 1x top rail (2388mm W)· 1x bottom rail (2388mm W) w/ aluminium insert· 8x vertical panels (1565mm H x 289mm W)· 2x end U channels (1495mm H)

F U L LY A S S E M B L E D G AT EN O A S S E M B LY R E Q U I R E D

2388mm

1800

mm

1000mm

1800

mm

1850

mm

440m

m44

0mm


5



TECH SPECS

TECH SPECS

TECH SPECS

• 2500mmH x 127mmW x 127mmD; 3.8mm wall thickness• White UV stabilised PVC with protective titanium dioxide additives• 153mmH x 52mmW slotted holes for panel top/ bottom rail insertion• Use as start or finish post. • Top cap sold separately• Not suitable for hinging or latching a gate. Use gate post for that application

• 2500mmH x 127mmW x 127mmD; 3.8mm wall thickness• White UV stabilised PVC with protective titanium dioxide additives• 153mm high x 52mm wide slotted holes both sides of post for panel top/bottom rail insertion• Use as inline post for straight fencing run• Top cap sold separately

• 2500mmH x 127mmW x 127mmD; 3.8mm wall thickness• White UV stabilised PVC with protective titanium dioxide additives• 153mmH x 52mmW slotted holes on adjacent sides for panel top/bottom rail insertion• Use at 90 degree corner • Top cap sold separately

127MM X 127MM 1 way post - Full privacy2500MM LONG

127MM X 127MM 2 way post - Full privacy2500MM LONG

127MM X 127MM 90° post - Full privacy2500MM LONG

127mm

127mm

127mm

127m

m12

7mm

127m

m


2500

mm

1494

mm

650m

m

50mm

153mm

153mm

2500

mm

1494

mm

650m

m

50mm

153mm

153mm

2500

mm

1494

mm

650m

m

50mm

153mm

153mm

6



TECH SPECS

• 2500mmH x 127mmW x 127mmD; 3.8mm wall thickness• White UV stabilised PVC with protective titanium dioxide additives• 153mmH x 52mmW slotted holes for panel top/ bottom rail insertion• Use as hinge post or latch post• Includes internal 2mm thick aluminium insert entire length of post (ie 2500mm long). Provides post rigidity and also, sturdy substrate for fixing of hinges or latch• Top cap sold separately

127MM X 127MM 1 way gate post - Full privacy2500MM LONG

TECH SPECS

• Internal fitting base plate suits 1 way post. • Enables base plate fitting of 1 way post for use as a hinge and/or latch post• 6mm thick base plate with 2mm thick vertical walls.• 1750mm high vertical walls provide post rigidity also, sturdy substrate for fixing of hinges and/or latch• Cold-galvanized steel provides strong corrosion resistance• 4 x fixing holes in base plate• Post sleeves over base plate and fixes to internal base plate with tek screws. Use 2 part domical cover to hide screw fixings• Base plate system not suitable for use where wind load considerations required

HEAVY DUTY Concealed base plate1750MM HIGH

1750

mm

118mm

118mm

81m

m

81mm

118m

m

127mm

127m

m


2500

mm

1494

mm

650m

m

50mm

153mm

153mm

TECH SPECS

• Internal fitting base plate suits 1 way, 2 way and 90 degree posts. Not suitable for use with 1 way ‘gate’ post• 6mm thick base plate with 2mm thick vertical walls• Cold-galvanized steel provides strong corrosion resistance• 4 x fixing holes in base plate• Post sleeves over base plate and fixes to internal base plate with tek screws. Use 2 part domical cover to hide screw fixings.• Base plate system not suitable for use where wind load considerations required• Refer install guide on page 12 for fitting information


620m

m

254m

m

118mm

118mm

81m

m

81mm

118m

m

57mm

7



TECH SPECS

TECH SPECS

• 1800mmH I beam stiffener• Alloy 6063 T5; mill finish• Fits inside 1 way or 2 way posts. Cannot be used with 90 degree post or gate post• Use where wind load is a consideration. Post stiffener will allow up to N4/C2 (AS4055 classification)• Refer install guide on page 11

• Tool creates a protruding flap/tag at the end of the horizontal top & bottom rail which prevents the rail pulling out from slots in posts• Specially designed tooling in jaw creates the protruding flap/tag

I beam

Hamptons fencing tool

TECH SPECS

• Made from SS304• Jig provides slot hole required in 127x127mm post for top & bottom rail insertion • New post slot holes may be required if stepping panels for slopping ground or if panels are height adjusted requiring change of distance between standard post slot holes• Route hole prior to post installation• Jig suits use with 6.35mm 1/4” trimmer with 16mm diameter guide (eg Makita 3707FC trimmer)

Hole cutting jig

900m

m

90m

m

117mm

6mm

4mm


163mm

HOW TO USE

1 2 3Place top or bottom rail on flat surface

Insert tool into channelwith flat tooling outside of channel and angled tooling inside channel

Push tool handles together to create a protruding flap

which prevents rail from pulling out of posts

PROTRUDING FL AP ON OUTER WALL

OUTER WALL OF TOP/BOT TOM RAIL

insert tool 20mm into channel

8 hamptons fencing system —


TECH SPECS

TECH SPECS

TECH SPECS

• 2 part domical cover – suits 127x127mm post• Can be fitted after post and panels installed. 2 parts neatly clip together• White UV stabilised PVC with protective titanium dioxide additives• Provides a stylish post finish

• Press on external fit cap• ‘English’ style cap with tapered top provides a decorative finish • White UV stabilised PVC with protective titanium dioxide additives• Use silicone for long term binding

• Press on external fit cap• Slimline tapered cap for minimalist post finishing • White UV stabilised PVC with protective titanium dioxide additives• Use silicone for long term binding

2 part domical cover

English style cap

Slimline tapered cap

181mm

175mm

175m

m

41.5

mm

181m

m13

3mm

40m

m

133mm

70m

m


9

F U L L P R I V A C Y F E N C I N G I N S T A L L G U I D E

1 Check for any utility lines in ground before digging as well as observing property boundaries and council regulations where appropriate.

2450mm 1000mm

50.8x152.4mm Top Rail

127x127mm Post

22.3x289mm Vertical Panel

25.4x26.7mm U-Channel

50.8x152.4mm Bottom Rail with Aluminium Insert

50.8x152.4mm Top Rail

63.5x101.6mm Postwith Aluminium Insert

22.3x289mm Vertical Panel

25.4x26.7mm U-Channel

50.8x152.4mm Bottom Rail with Aluminium Insert

Ground level

19

00

mm

25

00

mm

18

50

mm

60

0m

m

65

0m

m

2

Set to desired height, which will be underside of bottom rail

Assess layout of fence and set out string line around outside perimeter of fence. The string must be positioned along the outside perimeter of your posts. Ensure allowance made for digging post holes and concreting within your property boundaries and to avoid utility lines.Set the height of the string-line to the desired height of the underside of the bottom fence rail. A gap under the bottom rail of 50mm is standard, however adjust as needed for each specific install location.

Layout string-line across all fence spans.

String-line aligned to underside of bottom rail




3

5

Mark post to post centres using appropriate markings such as spray paint or stakes. Standard fence panel post centres are at 2450mm. If using shorter spans, space posts appropriately.Posts are 127x127mm square.

Mark post positions with spray paint or appropriate markers

Standard post spacing

2450mm C of posts 2450mm C of posts

24

50

mm

C o

f po

sts

For FENCE POSTS:Set posts into ground ensuring appropriate gap at bottom (refer Step 2). Pour in concrete. For end posts use 1 way post, for in-line posts use 2 way and for corners use 90° posts.Use a soft mallet with a wooden block on the top of the fence posts to drive the post into the wet concrete to the desired height, aligning with both top and bottom string lines. If not using top string line, assess height of posts in a line by eye (illustrate). Check posts plumb using a spirit level and adjust as necessary.Allow concrete to set before installing panels.

Drop posts into dug-out holes. Posts are pre-notched for top and bottom rails.

Use a soft mallet to finish posts height, aligning top of post with string-line, observing slot height with bottom string-line. Use a spirit level to plumb posts.

If not using a top string-line, align tops of posts by observing imaginary straight line across top edges of posts in a row.

Level to other posts.

Align bottom of post slot hole with string-line

Pour in concrete

For GATE POSTS ONLY: Gate posts sold with aluminium inserts for rigidity. Use gate posts for both hinge and latch sides of gate. Pay attention to orientation of slots on post, ensuring rail slots face away from the gate opening.Plumb using a spirit level and adjust height and angle as necessary before concrete cures.

4 For in-ground installation dig holes for posts minimum 600mm deep by 300x300mm wide. Hole positioning should be dug so that posts can be inserted against string-line by digging the holes approximately 2/3rds inside the string-line. Refer above-right image.Holes for posts should be minimum 600mm deep.If using base plated posts ignore above step and refer next page.

min

300mmm

in300mm

1/3rd

2/3rds

INTERIOR OF FENCEEXTERIOR OF FENCE

6

600mm minimum deep

11 — hamptons fencing system


OPTIONAL EXTRA - ALUMINIUM INTERNAL STIFFENER I-BEAM FOR AREAS REQUIRING WIND LOAD CONSIDERATION

If wind load consideration is not required, ignore this step.

For a fence panel at 2450 centre to centre and 1800mm high, a post stiffener will allow up to N4/C2 (AS4055 classification).

If stiffener I-Beam installed ensure I-Beam is positioned 400mm down from top of post and remains straight when installed. Ensure I-Beam does not lean to one side.

Secure stiffener I-Beam to post using 2 x tek screws offset 10mm on either side from centre of post and approx 400mm from bottom of post.

Before screwing off ensure I-Beam is central in post. (consider using internal timber chocks or similar to ensure I-Beam remains centre and straight - chocks and fixing screws not included).

NOTE: 90 degree slotted post cannot be used with Stiffener I-beam. Use 2x offset 1 way posts instead.

GATE POSTS: Gate posts sold with aluminium inserts for rigidity. Use gate posts for both hinge and latch sides of gate. Pay attention to orientation of slots on post, ensuring rail slots face away from the gate opening.

90 degree posts cannot be used with stiffener I-Beam.

Instead, at corners, use 2 x 1 way posts.

OPTIONAL EXTRA - ALUMINIUM INTERNAL STIFFENER I-BEAM FOR AREAS REQUIRING WIND LOAD CONSIDERATION

I-Beam

400mm

400mm

10mm10mm

Post

Tek screws

C

I-Beam

I-Beam

Post

Post

I-Beam positioned central inside post

Tek screws

*

12


BASE PLATED POSTS ONLY:(A) Cut posts to required length - cut post underneath bottom slot position. ***Cut under slot from minimum 35mm up to 100mm maximum. 35mm under the slot hole equates to underside of bottom rail being 35mm from ground level.(B) Affix base plates to ground using appropriate fixtures (not supplied), 4 x fixings required per base plate. Base plate hole diameters are 16mm. Ensure correct orientation of base plate to line up slots with fence direction.(C) Slide post over base plate and screw to base plate using appropriate tek screws (not supplied) at approximately 15mm from ground level. Ensure tek screws engage into the base plates. Use 6 screws total, 2 on each side, avoiding the open side cavity of base plate.(D) Install 2-part domical cover at bottom of post to hide screws. ***Domical cover height is 42mm. If domical cover required, minimum distance under slot must be 45mm.

THIS SECTION RELATES TO BASE PLATED POSTS

(B)

(D)

(A)

(C)

**

Align slots to direction of fence

Install 2-part domical cover to hide screws at base of post

Posts are supplied at length for in ground installation. Cut post under-neath bottom slot position.***

(Base plate hidden by post.)

min 35mm - max 100mm

Use open side cavity if required for 90° installation.

118mm81mm

7

8

Top and bottom rails are supplied suited to 2450mm centre to centre post spacing. If using custom spacing, top and bottom rails require width adjustment. Measure your installed posts from centre to centre. The top and bottom rail need to be width adjusted to the centre to centre measurement minus 60mm. For cutting of top and bottom rail, use a fine tooth blade to reduce chance of chipping (circular saws may leave rough edges).

Top/Bottom Rails are made to to suit 2450mm wide centre to centre of posts If using custom spaced post, cut top and bottom rails 60mm shorter than centre to

centre measurement (e.g if post centre to centre is 2000mm, cut top/bottom rail to 1940mm)

Slide bottom rail with aluminium insert into first post as far as possible and lever into adjacent post. Slide back bottom rail to ensure notches have passed into adjacent post.

The bottom rail should recess into each post approx 33-35mm.

127mm 127mm

127mm 127mm

13

9

10

Position vertical U-channel on top of bottom rail and push up tight against post. Repeat step on all posts, where fence panels are to be installed.U channel will be held against post both sides once vertical panels installed (no fixing required).TIP: put a dab of silicone between post and U-channel rear wall

Position vertical U-channel on top of bottom rail and push up tight against post.

Starting at the vertical U channel on one side, insert vertical panels into bottom rail and lever into position. Repeat process towards the next post.If using a custom length span, the last vertical panel will required cutting to size. Refer next step.

If using custom length rails, either re-notch using notching tool or secure into position on the inside of rail/inside of post - refer to diagram.**

11

22


14

12

11

Measure from edge of panel to edge of post.Deduct a further 2mm to allow for U-Channel.

Install top rail over vertical panels and simultaneously push top rail as far as possible into one post and then slide back into adjacent post. Standard length top rails are self securing using the pre-notched tongues. If using custom lengths, re-notch the tongues with notching tool (sold separately) or secure top rail in place on post using appropriate screws.Note: The top rail should recess into each post approx 33-35mm.

If using custom span lengths secure top rail inside post with appropriate screws (if not re-notching with tool).

The last vertical panel in the span may need cutting to fit. Mark distance to cut on last vertical panel to be installed (be mindful of tongue and groove profile and adjust panel width on appropriate side to ensure correct joining on side to be installed) and cut using a fine tooth blade. Follow manufacturer’s instructions for safe use of saw.

Mark distance to cut on last vertical panel to be installed (be mindful of tongue and groove profile and adjust panel width on appropriate side to ensure correct joining on side to be installed)

Repeat process for remaining posts.Apply silicone to inner of top caps and press on to each post to finish.

13

Measure distance from the edge to be joined to the vertical panels.

Install cut vertical panel to complete fence span

Cut using a fine tooth blade




16

S E M I P R I V A C Y F E N C I N G


TECH SPECS

TECH SPECS

• Top rail: 2388mmW x 89mmH x 51mmD; 2.8mm wall thickness• Mid rail: 2388mmW x 89mmH x 51mmD; 2.8mm wall thickness• Bottom rail: 2388mmW x 152mmH x 51mmD; 2.2mm wall thickness• Pickets: 785mmH x 38mmW x 38mmD with 2x pickets 1030mmH• Achieves overall panel height of 1200mm• 57mm gap between pickets• Pickets easily insert into punched rails

• Flat pack kit in a box – easy assembly• White UV stabilised PVC with protective titanium dioxide additives

• Bottom rail includes aluminium insert for extra rigidity• Vertical side posts/rails are 1250mmH x 102mmW x 63mmD; 3mm wall thickness• Distance between top & bottom rail is 1200mm • Includes 4 x aluminium internal inserts for rigidity (refer cross hatch area in drawing). Install hinges & latch in these areas for maximum fixing strength• Gate cannot be width or height adjusted

• Fully assembled gate including 2 x flat top caps• White UV stabilised PVC with protective titanium dioxide additives

Semi privacy panel kit2388MM WIDE1200MM HIGH

Semi privacy gate1000MM WIDE1200MM HIGH

K I T I N C L U S I O N S· 1x punched top rail (2388mm W)· 1x punched mid rail (2388mm W)· 1x punched bottom rail (2388mm W) w/ aluminium insert· 22x pickets (785mm W)· 2x pickets (1030mm W)

F U L LY A S S E M B L E D G AT EN O A S S E M B LY R E Q U I R E D

2388mm

1000mm

1200

mm

203m

m

203m

m

57mmgap

55mmgap

666m

m

666m

m

1200

mm


IDEAL FOR FRONT/BOUNDARY FENCING

1250

mm

440m

m44

0mm

17



TECH SPECS

TECH SPECS

TECH SPECS

• 1900mmH x 102mmW x 102mmD; 3.8mm wall thickness• White UV stabilised PVC with protective titanium dioxide additives• Slotted holes for insertion of panel top, mid and bottom rails• Use as start or finish post. • Top cap sold separately• Not suitable for hinging or latching a gate. Use Gate Post for that situation

• 1900mmH x 102mmW x 102mmD; 3.8mm wall thickness• White UV stabilised PVC with protective titanium dioxide additives• Slotted holes both sides of post for insertion of panel top, mid and bottom rails• Use as inline post for straight fencing run• Top cap sold separately

• 1900mmH x 102mmW x 102mmD; 3.8mm wall thickness• White UV stabilised PVC with protective titanium dioxide additives• Slotted holes on adjacent sides of post for insertion of panel top, mid and bottom rails• Use at 90 degree corner• Top cap sold separately

102MM X 102MM 1 way post - Semi privacy1900MM LONG

102MM X 102MM 2 way post - Semi privacy1900MM LONG

102MM X 102MM 90° post - Semi privacy1900MM LONG

1900

mm

1900

mm

1900

mm

102mm

102mm

102mm

102m

m10

2mm

102m

m


666m

m66

6mm

666m

m65

0mm

650m

m65

0mm

49mm

49mm

49mm

90mm

90mm

90mm

90mm

90mm

90mm

203mm

203mm

203mm

152mm

152mm

152mm

18



TECH SPECS

• 1900mmH x 102mmW x 102mmD; 3.8mm wall thickness• White UV stabilised PVC with protective titanium dioxide additives• Slotted holes for insertion of panel top, mid and bottom rails• Use as hinge post or latch post• Includes internal 1.5mm thick aluminium insert entire length of post (ie 1900mm long). Provides post rigidity and also, sturdy substrate for fixing of hinges or latch• Top cap sold separately

102MM X 102MM 1 way gate post - Semi privacy1900MM LONG

TECH SPECS

• Internal fitting base plate suits 1 way post. • Enables base plate fitting of 1 way post for use as a hinge and/or latch post• 6mm thick base plate with 2mm thick vertical walls.• 1150mm high vertical walls provide post rigidity also, sturdy substrate for fixing of hinges and/or latch• Cold-galvanized steel provides strong corrosion resistance• 4 x fixing holes in base plate• Post sleeves over base plate and fixes to internal base plate with tek screws. Use 2 part domical cover to hide screw fixings• Base plate system not suitable for use where wind load considerations required


1150

mm

91mm

91mm

53m

m

53mm

91m

m

1900

mm

102mm

102m

m


666m

m65

0mm

49mm

90mm

90mm

203mm

152mm

TECH SPECS

• Internal fitting base plate suits 1 way, 2 way and 90 degree posts. Not suitable for use with 1 way ‘gate’ post• 6mm thick base plate with 2mm thick vertical walls• Cold-galvanized steel provides strong corrosion resistance• 4 x fixing holes in base plate• Post sleeves over base plate and fixes to internal base plate with tek screws. Use 2 part domical cover to hide screw fixings• Base plate system not suitable for use where wind load considerations required• Refer install guide on page 23 for fitting information

Concealed base plate616MM HIGH

616m

m

215m

m

91mm

57mm

91mm

53m

m

53mm

91m

m

19




TECH SPECS

• Made from SS304• Jig provides slot hole required in 102x102mm post for top, mid & bottom rail insertion • New post slot holes may be required if stepping panels for slopping ground or if panels are height adjusted requiring change of distance between standard post slot holes • Jig suits use with 6.35mm 1/4” trimmer with 16mm diameter guide (eg Makita 3707FC trimmer)

Hole cutting jig

1300

mm

Top rail

Mid rail

Bottom rail

TECH SPECS

• Tool creates a protruding flap/tag at the end of the horizontal top, mid & bottom rail which prevents the rail pulling out from slots in posts• Specially designed tooling in jaw creates the protruding flap/tag

Hamptons fencing tool

TECH SPECS

• 2 part domical cover – suits 102x102mm post• Can fitted after post and panels installed. 2 parts neatly clip together• White UV stabilised PVC with protective titanium dioxide additives• Provides a stylish post finish

2 part domical cover

150mm

150m

m37

mm

HOW TO USE

1 2 3Place top or bottom rail on flat surface

Insert tool into channelwith flat tooling outside of channel and angled tooling inside channel

Push tool handles together to create a protruding flap

which prevents rail from pulling out of posts

PROTRUDING FL AP ON OUTER WALL

OUTER WALL OF TOP/BOT TOM RAIL

insert tool 13mm into channel



TECH SPECS

• Press on external fit cap• ‘English’ style cap with tapered top provides a decorative finish • White UV stabilised PVC with protective titanium dioxide additives• Use silicone for long term binding

English style cap

157mm

157m

m58

mm

TECH SPECS

• Press on external fit cap• Slimline tapered cap for minimalist post finishing • White UV stabilised PVC with protective titanium dioxide additives• Use silicone for long term binding

Slimline tapered cap

107m

m36

mm

107mm

21

S E M I P R I V A C Y F E N C I N G I N S T A L L G U I D E

50.8 x 88.9mm Top Rail

2450mm56.9mm

50.8 x 88.9mm Mid Rail

50.8 x 152.4mm Bottom Rail with aluminium insert

Ground level

101.6 x 101.6 Post

38.1 x 38.1mm Picket

1 Check for any utility lines in ground before digging as well as observing property boundaries and council regulations where appropriate.

2

Set to desired height, which will be underside of bottom rail

Assess layout of fence and set out string line around outside perimeter of fence. The string must be positioned along the outside perimeter of your posts. Ensure allowance made for digging post holes and concreting within your property boundaries and to avoid utility lines.Set the height of the string-line to the desired height of the underside of the bottom fence rail. A gap under the bottom rail of 50mm is standard, however adjust as needed for each specific install location.

Layout string-line across all fence spans.

String-line aligned to underside of bottom rail




3

5

Mark post to post centres using appropriate markings such as spray paint or stakes. Standard fence panel post centres are at 2450mm. If using shorter spans, space posts appropriately.Posts are 102x102mm square.

Mark post positions with spray paint or appropriate markers

Standard post spacing

2450mm C of posts 2450mm C of posts

24

50

mm

C o

f po

sts

For FENCE POSTS:Set posts into ground ensuring appropriate gap at bottom (refer Step 2). Pour in concrete. For end posts use 1 way post, for in-line posts use 2 way and for corners use 90° posts.Use a soft mallet with a wooden block on the top of the fence posts to drive the post into the wet concrete to the desired height, aligning with both top and bottom string lines. If not using top string line, assess height of posts in a line by eye (illustrate). Check posts plumb using a spirit level and adjust as necessary.Allow concrete to set before installing panels.

Drop posts into dug-out holes. Posts are pre-notched for top and bottom rails.

Use a soft mallet to finish posts height, aligning top of post with string-line, observing slot height with bottom string-line. Use a spirit level to plumb posts.

If not using a top string-line, align tops of posts by observing imaginary straight line across top edges of posts in a row.

Level to other posts.

Align bottom of post slot hole with string-line

Pour in concrete

For GATE POSTS ONLY: Gate posts sold with aluminium inserts for rigidity. Use gate posts for both hinge and latch sides of gate. Pay attention to orientation of slots on post, ensuring rail slots face away from the gate opening.Plumb using a spirit level and adjust height and angle as necessary before concrete cures.

min

300mmm

in300mm

1/3rd

2/3rds

INTERIOR OF FENCEEXTERIOR OF FENCE

600mm minimum deep

4 For in-ground installation dig holes for posts minimum 600mm deep by 300x300mm wide. Hole positioning should be dug so that posts can be inserted against string-line by digging the holes approximately 2/3rds inside the string-line. Refer above right image.Holes for posts should be minimum 600mm deep.If using base plated posts ignore above step and refer next page.

6

23


(B)

(D)

(A)

(C)

**

Align slot to direction of fence

Install 2-part domical cover to hide screws at base of post

9153Ø

16

7

8 Slide bottom rail with aluminium insert into first post as far as possible and lever into adjacent post. Slide back bottom rail to ensure notches have passed into adjacent post.The bottom rail should recess into each post approx 20mm.

102mm 102mm

102mm 102mm

Posts are supplied at length for in ground installation. Cut post under-neath bottom slot position.***

min 30mm - max 85mm

BASE PLATED POSTS ONLY:(A) Cut posts to required length - cut post underneath bottom slot position. ***Cut under slot from minimum 30mm up to 85mm maximum. 30mm under the slot hole equates to underside of bottom rail being 30mm from ground level.(B) Affix base plates to ground using appropriate fixtures (not supplied), 4 x fixings required per base plate. Base plate hole diameters are 16mm. Ensure correct orientation of base plate to line up slots with fence direction.(C) Slide post over base plate and screw to base plate using appropriate tek screws (not supplied) at approximately 15mm from ground level. Ensure tek screws engage into the base plates. Use 6 screws total, 2 on slotted side, 2 on solid side and 1 on each wing. Ensure tek screws do not clash.(D) Install 2-part domical cover at bottom of post to hide screws. ***Domical cover height is 37mm. If domical cover required, minimum distance under slot must be 40mm.

Top and bottom rails are supplied suited to 2450mm centre to centre post spacing. If using custom spacing, top, mid and bottom rails require width adjustment. Measure your installed posts from centre to centre. The top, mid and bottom rails need to be width adjusted to the centre to centre measurement minus 60mm. For cutting of top, mid and bottom rails, use a fine tooth blade to reduce chance of chipping (circular saws may leave rough edges).

Top/Mid/Bottom Rails are made to to suit 2450mm wide centre to centre of posts If using custom spaced post, cut top, mid and bottom rails 60mm shorter than centre to

centre measurement.

(e.g if post centre to centre is 2000mm, cut top/mid/bottom rail to 1940mm)

THIS SECTION RELATES TO BASE PLATED POSTS




Push mid rail into slot on 1 post then lever into slot on adjacent post. Insert pickets as the mid-rail is levering down. Posts may flex to allow for insertion.

Install short pickets into bottom-rail leaving long pickets for subsequent step. The long pickets are postitioned 6 pickets in from either end.9

Insert long pickets through mid-rail and into bottom rail.NOTE: If panels width adjusted and therefore horizontal rail widths adjusted, you may need to cut suitable holes through mid-rail and on underside of top-rail to allow for longer pickets to pass through. As standard, the longer pickets are evenly spaced from either end. You should consider this during fence layout planning.

10

11

25


**

13

If using custom lengths, re-notch the tongues with notching tool (sold separately) or secure top rail in place on post using appropriate screws.Note: The top rail should recess into each post approx 20mm

If using custom span lengths secure top rail inside post with appropriate screws (if not re-notching with tool).

Repeat process for remaining posts.Apply silicone to inner of top caps and press on to each post to finish.

12 Install top rail over long pickets guiding pickets into holes on underside of top rail. Insert top rail into one post and then lever into adjacent post.



F U L L P R I V A C Y G A T E S L A Y O U T I N F O

1800mm high full privacy gate must use a latch mechanism that is operable from both sides

Hardware guide —D&D Lokk Latch DeluxeSee page 29 for full specs

D&D Heavy Duty TruClose hingesSee page 28 for full specs

LATCH OPTIONS HINGE OPTIONS

127m

m

127m

m

127mm 127mm

63m

m

63m

m

102mm 102mm

HINGE POST

HINGE L ATCH

HOUSE SIDE ( INSIDE GATE)

GATE OPENS INWARDS

STREE T SIDE (OUTSIDE GATE)

L ATCH POST

GATE

NOTE: GATE MUST BE SE T BACK AND OPEN INWARDS

PLAN VIEW OF GATE:

LAYOUT INFORMATION FOR FULL PRIVACY PEDESTRIAN GATES

Place hinges on back side of post to allow gate to open inwards

Use latch which is operable from both sides of gate




S E M I P R I V A C Y G A T E S L A Y O U T I N F O

1200mm high semi privacy gates commonly latch from one side onlyGate may be installed to swing inwards (towards the house) or outwards (away from the house)

Hardware guide —A range of one sided latching options are availableSee page 29-30 for full specs

D&D Heavy Duty TruClose hinges or aluminium KwikFit hingesSee page 28 for full specs

LATCH OPTIONS HINGE OPTIONS

102m

m10

2mm

102m

m10

2mm

102mm

102mm

102mm

102mm

63m

m63

mm

63m

m63

mm

102mm

102mm

102mm

102mm

HINGE POST

HINGE POST

L ATCH POST

L ATCH POST

HINGE

HINGE

L ATCH

L ATCH





GATE

GATE

NOTE: GATE MUST BE SE T BACK AND OPEN INWARDS

GATE OPENS INWARDS

GATE OPENS OUTWARDS

Plac

e hi

nges

on

hous

e si

de o

f pos

t to

allo

w g

ate

to o

pen

inw

ards

Plac

e la

tch

on h

ouse

sid

e of

pos

t to

allo

w g

ate

to o

pen

inw

ards

NOTE: GATE MUST BE INLINE WITH FRONT OF POST

PLAN VIEW OF GATE:

LAYOUT INFORMATION FOR SEMI PRIVACY PEDESTRIAN GATES

If using LokkLatch Deluxe to latch both sides, gate must be set back and swing inwards.!

1

1

2

2

Plac

e hi

nges

on

stre

et s

ide

of p

ost t

o al

low

gat

e to

ope

n ou

twar

ds

Plac

e la

tch

on s

tree

t sid

e of

pos

t to

allo

w g

ate

to o

pen

outw

ards



HOUSE SIDE ( INSIDE GATE)HOUSE SIDE ( INSIDE GATE)

28

G A T E H I N G E S

TruClose® hinge pairNO ALIGNMENT LEGSD&D code: TCA1S3BT

• D&D patented tension adjustment• Strong, moulded polymer and stainless steel• Adjust tension from both ends of the hinge• Super strong engineering polymers and stainless steel components• Won’t rust, bind, sag or stain• Limited lifetime warranty• Pool fencing compliant - Rated for gates up to 30kg

19mmgap spacing

No alignment legs on hinge allows for flexibility when positioning gate onto post

(variable spacing achievable)

Noalignment legs

21mm 28mm

35m

m

76mm

96m

m

46mm

44m

m

TruClose® hinge pair2 ALIGNMENT LEGSD&D code: TCA1L2S3BT

• D&D patented tension adjustment• Strong, moulded polymer and stainless steel• Adjust tension from both ends of the hinge• Super strong engineering polymers and stainless steel components• Won’t rust, bind, sag or stain• Limited lifetime warranty• Pool fencing compliant - Rated for gates up to 30kg

Two alignment legs on hinge allows for quick, easy and accurate positioning of gate onto post

21mmgap spacing

2alignment legs

75mm

96m

m

46mm

44m

m

21mm 25mm

34m

m22

mm


Kwik Fit® Aluminium hinge pairADJUSTABLE TENSIOND&D code: KF3ABL

· Powder coated black aluminium hinges· D&D patented tension adjustment - 6 tension settings, adjustable from both ends· Self closing hinge - closes gates up to 20kg· Internal stainless steel spring· Wall and post mounting hinges· Tested to over 300,000 cycles· Pool fencing compliant

19mmgap spacing

Adjustable tension

38.1

mm

38.1mm19mm

38.1

mm

32.6mm

89.2mm

18.5

mm

POST TO GATE INSTALLATION

POST TO GATEINSTALLATION

WALL TO GATE INSTALLATION

Fit to posts or wallsAdjustable fixing plate


29

G A T E L A T C H E S

Lokk Latch® deluxeD&D code: LLDABS2LA

• Lockable from both sides of gate• Locks are keyed alike• Rekeyable, 6-pin security lock• Fits up to 150mm deep posts• Black polymer

148.

5mm 83

mm

26mm

27m

m

38mm

37.5mm

30m

m

25m

m

15-40mmgap spacing

KEYED ALIKE

Lokk Latch® deluxeD&D code: LLDABS2-L

Lokk Latch®

D&D code: LLAA

• Lockable from both sides of gate• Locks are keyed to differ• Rekeyable, 6-pin security lock• Fits up to 150mm deep posts• Black polymer

• Ideal latch for home and garden gates• Key lockable - no need for padlocks or chains• Quick and easy to install on all gate materials• Strong polymer design will not rust or stain• Minimum post size for fitting – 25mm

148.

5mm 83

mm

26mm

27m

m

38mm

37.5mm

30m

m

25m

m

15-40mmgap spacing

15-40mmgap spacing

KEYED TO DIFFER

KEYED TO DIFFER25mm

25m

m

29mm

20m

m

32mm

T latchD&D code: TL01

• Padlockable toggle latch• Lockable from one side only

10-45mmgap spacing

120m

m

24mm 24mm

40m

m

*Padlock not included



30

G A T E A C C E S S O R I E S

D latch• Easy to install D latch and striker• Includes 4x tek screws• Cost effective latching solution

10-35mmgap spacing

80mm 25mm

61m

m

84mm

101m

m

Post plugs - 4 packBlack finish

300mm drop boltBlack or zinc plated finish

D&D Padlockabledrop boltBlack finishD&D code: QB124

D&D Premiumlockable drop boltBlack finishD&D code: LL118BX-LA

• Ø32mm outer top suits 25mm hole• Suits post wall thickness 1.5mm - 3.2mm• Cap holes in posts when fixing posts to structures

• Ideal for driveway gates• Cost effective drop bolt• Easy to install

• Powder coated black, stainless steel drop-bolt • Padlockable (*Padlock not included)• Tough, moulded polymer mounting system

D&D Gate stopBlack polymer finishD&D code: TCGS3

D&D Gate handleBlack polymer finishD&D code: LL3GH

• Ideal gate alignment device• Prevents damage to latches & hinges• Greatly reduces gate-slam noise• Tough, durable polymer + rubber bumper

• Side-fixing legs for quick alignment• Fits left-hand or right-hand opening gates• Won’t rust or stain: strong polymer construction

156.

5mm

120m

m

93mm

106m

m

617m

m

300m

m

Ø14mm

Ø14mm

105mm

467m

m

• 316 marine-grade stainless steel drop-rod• Tough polymer-housing mounting system• 6-pin lock (rekeyable to match doors & gate locks)



31

Soudal white silicone300mL• White finish• High quality, neutral cure silicone• Easy to smooth & finish• For sealing, waterproofing and bonding applications• Contains mould & mildew inhibitors• Colourfast and UV resistant• Strong adhesion to glass, tile, ceramics, aluminium, metals (including powder-coated & anodised), painted surfaces, fibreglass, stainless steel• Use standard caulking gun

Soudal translucent silicone300mL• Translucent finish• High quality, neutral cure silicone• Easy to smooth & finish• For sealing, waterproofing and bonding applications• Contains mould & mildew inhibitors• Colourfast and UV resistant• Strong adhesion to glass, tile, ceramics, aluminium, metals (including powder-coated & anodised), painted surfaces, fibreglass, stainless steel• Use standard caulking gun

TRANSLUCENT

F E N C I N G E X T R A S

Soudal heavy duty cartridge gun• Heavy duty, streel trade quality cartridge gun• Geared ratio 18:1 for smooth operation and easy application • Dripless system feature automatically releases pressure to reduce mess/waste• Suits 300ml silicone cartridges and 280ml chemical anchor

Soudal Epofix 82A 300g

• 24ml bottle• Translucent fast curing 2 part epoxy• Very strong bonding of many types of materials including metal, wood,glass and plastics

Soudafix CA1400Chemical anchor280mL

• High performance, two-component chemical anchoring resin for the pressure-free securing of anchoring rods, studs, treaded collars etc• Fast cure• Vinylester styrene free• Can be used in damp concrete• Apply with standard caulking gun

Self drilling tek screws 12Gx20mm - BAG OF 100Black, woodland grey, monument, primrose, paperbark, silver & surfmist

• Self drilling tek screw featuring integrated thread and drill/cutting tip• 12G x 20mm tek screw with hex head• Packed in convenient bags of 100 screws

Timber fixing kit4 PACK - SS316

Concrete fixing kit4 PACK - SS316

M10 x 120mm hexcoach screwSS316

• M10 x 110mm timber lag screws x4 with nuts and washers• Use if base plating to timber substrate• Ensure timber substrate is suitable for affixing to

• M10 x 120mm concrete threaded rods x4 with nuts and washers• Use if base plating into concrete. Chemical anchor rods as required

• Use if base plating to timber substrate• Ensure timber substrate is suitable for fixing to• Sold as single screw

• Specially formulated to harden rapidly• Not available Perth depot - Use 20kg Kwik Set concrete (Code: GROUT-KWIKSET)

Rapid set concrete 20KG BAG

Kwikset concretePerth only

120mm

17mm

72mm



Errors and omissions excepted. Measurements and drawings are provided as a guide only and should not be relied upon solely for installation purposes.

Product codes, products and prices may change as systems are constantly reviewed and updated.

Due to each installation situation being different, it is the installer’s responsibility to seek engineering compliance and/or certification should it be required as part of a project, regulatory or statutory requirement.

As each installation site is different, it is the installer's responsibility to consider the impact of wind loads on the design of a fence. Please consult your engineer for site specific matters relating to wind loads.

Colours displayed in PDF's or printed documents are indicative only and should not be relied on as a true representation of actual powder coat colour. All products should adhere to a suitable care and maintenance schedule.

©Copyright 2020. This catalogue is the copyrighted and cannot be reproduced, copied or replicated without the prior written consent of the original owner. Such consent applies to images as well as text.

Hamptons Fencing Catalogue V1

Documents

HAMPTONS FENCING...Fencing range - a white PVC fencing system available in full and semi privacy styles. Hamptons Fencing is amazingly cost effective and is visually stunning! hamptons