Upload
dinhkhanh
View
226
Download
0
Embed Size (px)
Citation preview
+44 (0) 1326 702 220 [email protected] www.feritech.com
Innovative engineering for extreme global environments
The Feritech Hamon grab is the recommended sampler for collecting bulk samples of coarse seabed sediment substrates such as sand and gravel, as well as benthic macrofauna.
With interchangeable sampling buckets available in two sizes (0.1m2 or 0.2m2) and modular lead ballast weights, the user can configure the system as required.
Sampling bucket inspection windows and deck stand aid sediment recovery and analysis.
Available to buy or rent.
Hamon Grab
Product highlights
• 0.1m² or 0.2m² interchangeable buckets
• Sample depth penetration up to 10cm
• Marine 316 grade stainless steel construction
• Configurable lead ballast weights
• Easy to handle
• Virtually maintenance free
• Stock item
• Available to hire
• Shippable via standard pallet service
• Optional ISPM 15 certified shipping crate
• Covered by Feritech global warranty
+44 (0) 1326 702 220 [email protected] www.feritech.comFeritech Limited does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of the information contained in this document.
Innovative engineering
Feritech offers a comprehensive range of geotechnical equipment. All our products are designed, manufactured and tested by our team in the UK to the highest standards. Many of our products are available immediately from stock, including unparalleled access to spares and consumables.
FT563 Hamon grab specification
Manufactured from marine grade 316 stainless steel, its robust build and high quality parts are everything that you would expect from a Feritech product.
Additional stabilising lead ballast weights (25kg each) can be configured by the user as required during operations.
Including an arming pin and lever arm guard provides safety to users during operation and protection in transit.
During deployment the seabed sediment sample is pushed into the sampling bucket as it rotates through 90 degrees from horizontal to vertical. Sediment is sealed by a rubber sealed plate for safe return during recovery to the surface.
Independent lifting points on top of the Hamon grab, low friction pulleys and handles on each side ease handling.
Interchangeable buckets (available in two sizes) allow sampling operations to continue while analysis is underway.
Designed to be shipped on a pallet the Hamon grab can also be supplied in a specially designed ISPM 15 certified wooden shipping crate for transportation globally.
Length 1194
Width 1000
Height 1125
Overall weight (excluding ballast) 155kg
Product code
0.1m2 bucket (13litre capacity) 351x214x204 FT563-0020
0.2m2 bucket (23litre capacity) 348x422x205 FT563-0025
Bucket filter with 0.5mm mesh 184x94x4 FT563-0028
Lead ballast weight 25kg FT563-0013
Stainless steel 7 strand lifting wire Ø8 FT563-0014
ISPM 15 certified shipping crate 1150x1150x1650 FT563-CSC
316 stainless steel deck stand 1030x1030x460 FT563-0019
FT563 Hamon grab accessories
All dimensions are in mm unless otherwise stated
0.1m2 bucket
0.2m2 bucket
Bespoke solutions
All our systems work straight out of the box and can be mobilised within hours. As with all Feritech products, we can tailor it to your exact needs. Please contact us to discuss your requirements.
Global warranty and support
All Feritech equipment comes with a global support and warranty package. Combined with global delivery and exceptional reliability we ensure that you have the best technical support wherever and whenever you might need it.