HAMILTON W ATe H - Welcome to the NAWCC!...The convenient steel Hamilton Materials Cabinet, together with descriptive comment on Dynavar Mainsprings and information on PML 79 Oil (the

HAMILTON W ATe H

HAMILTON WATCH MATERIALS CATALOG

PREFACE

The practical value of this Materials Catalog will be obvious to watch repairmen everywhere. But what may not be so obvious is that this catalog and the inventory of genuine materials it represents is but part of Hamilton's total facilities devoted to maintenance of service on its product. Informative technical

and service literature on Hami lton watches is another. Factory service when and as needed is still another of these facilities. The keystone of the success of all of these facilities is t heir intelligent use by the watchmaker. And of American watchmakers, Hamilton is indeed proud. To them, more than anyone else in the industry, goes the credit for keeping Hamil ton, America's Fine Watch, fine!

MATERIALS FOR SPECIAL HAMILTON WORLD WAR II TIMEPIECES are not included in this catalog. Many of the parts of t hese timepieces are still available in limited quantities but, because of slight demand for them, they are seldom stocked by Materials Wholesalers. We will be glad to ship t hem through your Authorized Hamilton Materials Wholesaler, as long as they remain available. For detailed information, write directly to the Materials Sales Department, Hamilton Watch Company, Lancaster, Pa.

Neither pinions nor wheels separately, nor staffs, where applicable, for cent er, th ird, and fourth are any longer available. Only wheel and pinion complete, or wheel and pinion and staff complete, as the case may be, are now available. The escape wheel, the escape pinion, and the escape wheel complete with pinion continue to be available as before. This change has been instituted to simplify inventory both here and in the watchmaker's possession as well as to afford labor savings in the t rade of unstaking and restaking to replace components of the wheel and pinion assembly. Illustrations of selected grades of the different size Hamilton movements made are shown on pages 4 to 7 to assist the watchmaker in identifying movements.

The convenient steel Hamil ton Materials Cabinet, together with descriptive comment on Dynavar

Mainsprings and information on PML 79 Oil (the new watch oil developed and manufactured by Hamilton to meet watchmakers' needs for one wi th all fine watch oil "equirements), will be found on page 36.

TO ORDER HAMILTON MATERIALS, secure the movement grade number which is engraved on one of the bridges of virtually all Hamilton movements, then consult the index on page 3. Hamilton movements which do not have grade numbers engraved on them do carry serial numbers which can be checked against the serial numbers listed on pages 9 to 13 to secure the grade number. All materials are classified by watch size and grade on pages indicated in the index. When the material desired has been located under the appropriate grade, the order can be prepared. Always use catalog number and part name on material orders. All orders for Hamilton materials should be sent to Authorized Materials Wholesalers. A list of Authorized Wholesalers will be furnished upon request.

Printed in U. S. A. 2-1642

T ABLE OF CONTENTS

TABLE OF CONTENTS

Crown s ...

PAGE 31-32

PAGE .M.aterial Descriptions and Catalog N umbers (Cont' d )

Description of Hamilton Walch Grades ..

Hand D escripLioH s .

Hand II] u s lrations.

Mainsprings, Oynavu,o.

l\lainsprings, S leel.

Material Cabinet. . .

Material Descriptions and Catalog Numbers

18 Size Movements Grades 924, 925, 926, 927, 928, 929,

930, 931, 932, 933, 934, 935, 936, 937, 938, 939, and 948.. .... ..

Grades 940, 941, 942, 943, 944, and 946 ..

16 Size Movements

8

34-35

34-35

33

33

36

17 18

Grades 950, 952, 996, 950E, and 950B .... .. . 19 Grades 954, 962, 963, 966, 967, 972, 973,

956, 964, 965, 968, 969, 974, 975, 976, 977, and 978 .................. .

Grades 960, 961, 970, 971, 990, 991, 992, 20

21 993, 994, and 992B .. Grade 992E ... ............. 22

12 Size Movements Grades 400 (Thin Model), 900, 910, 914,

and 920 ....... .. . Grades 902, 904, 912. !J16, 918, and n2 ..

10 Size Movements

22 23

o Size Movements Grades 981, 983, and 985.

6/ 0 Size Movements Grades 986, 988, 986A .. Grades 987, 987E, 987F, 987A, 987S, and

979 ......... .. ... . 8/0 Size Movements

Grades 747 and 748 .. 12/ 0 Size Movements

Grade 401 .... 12/0 Size (New) Movements

Grades 752, 753 and 754 .. 14/ 0 Size Movements

Grades 980, 980A, 980B, 982, and 982M . . 18/ 0 Size Movements

Grades 989 and 989E .. 20/ 0 Size Movements

Grade 997 ... 21/ 0 Size Movements

Grades 721, 750, and 75l. . ... .. . . Grades 995 and 995A ... .

22/ 0 Size Movements Grades 911 and 911M .

Movement Illustrations ..... .

'PML 79 Watch Oil .....

Preface.

Se rial Numbers .

24

25

26

27

27

28

28

29

29

29 30

30

4-7

36

1

9-13

Grades 917, 921. and 923 . 24 View of a Typical Ham.ilton Watch (Exploded) 14-15

HAMILTON WATCH DIALS

The pages of dial pictures, numbers and descriptions which were part of previous Hamilton Materials Catalogs are not included in this new edition. This omission is prompted by the physical impossibility of keeping the listing completely up-todate with the rapid addition of new models and alternate dials. We will continue to supply avai lable dials for all Hami lton watches.

Our experience shows that we have no d ifficulty in filling dial orders from wa tchmakers. Here is how to order:

(1) Send in the original dial as a sample. (2) Tell us the model name (found on the inside of the

case back on newer models) and movement number, and describe the dial.

(3) If the model name is not known, tell us the case number and movement number, and descr ibe the dial.

Please make your description of the dial wan ted as complete as possib le. Include:

(1) The d ial color (silver, coral, gilt or black). (2) The type of numbering (black t ransfer, etched,

applied gold or rhodium plated applied gold). (3) The character of the numbering (numerals,

markers, dots, or squares) .

Wi th this complete informa tion, we can fill your order most rapid ly and give you very prompt service.

HAMILTO N WATCH COMPANY LANCA S TER, PENNA. , U.S.A.

Manufacturers of America's FINE Watch

3

4

HAMILTON WATCH MOVEMENT ILLUSTRATIONS

C HADE 936 Open face. 17 jewels, s lngle rolle r before No. 42600 1, d o uble rolle r aft.er N o . 426000

C HA UE 9j'l· Open face, '" pla te m o vt., 17 j ewels, si ngle roller bcfol'C Xo. 2'17001. double rolle r afte r Xo. 247000

C IIADE 992B Open face, %" ]J!ate movt .. 2 1 jewels. double roller

18 SIZE

16 SIZE

C HADE 950 O pen face, bricl ge movt.. 23 jewels, double roller

C HADE 925 HUliting , 17 jewels, s ingle roller

C HADE 992 O pen face . %" piaU! movt., 21 jewels, s ingle r oller before /\0. 37700 1, double roller after N o. 379000

C HADE 950B Open face, bridge movt . 23 jewels, double roller


G HADE 918 Open face, U piatemovt., 19 Jewels, double roller

G HADE 917 Open face, U pJatemovt., 17 jewels, double roller

GRADE 902 Open face, bridge movt" 19 jewels, double roller

12 SIZE

10 SIZE

G RADE 922 Open face, bridge movt-., 23 j ewel s, double roller

G IlADE 921 Open faco, briclgo movt., 2\ Jewels, double roll Ct'

o SIZE

C RADE 983 Hu n ting. bridge movt.. 17 jewels, double roller

G HADE 912 Open face, % plate movt., 17 j ewels, d ou ble roller

G IlADE 923 Open face, bridge movt., 23 jewels, d ouble roller

5

6


GHAIJE 91.16 Open face, %" pl atc Jllovt. 17 jewels, double I'oller

CHADE 9U7A HUllling, %' plate m ovt. , 17 jewels, double roller

CHADE 747 Hu n ting. U plato movt., 17 jewels, doubl e ro ll er

CHADE 752 I-I un l ing, U p late movl., 17 jewels. double rolle r

CHADE 980 Open face, ~ plate movt., 17 jewels, d ouble roller

6/0 SIZE

CHADE 9U6A Open face. U platemovt .. 17 jewels, d ouble roller

CHADE 987S Hunting, ~~ plate 1ll0vt .. 17 jewels. d o uble roller

8/0 SIZE

CHAnE 748 (one piece barrel bridge)

H unting, U plate movt., 18 j ewel s, double ro ll er, direct drI ve center seconds

NEW 12/0 SIZE

CHAnE 75:1 Hun t ing. ~ plate mo,,{. .• 19 jewels. <.Io u b le roller

14/0 SIZE

CIlADE 982 Open face, ~ platcmovt., 19 jewels, double roller

C HADE 987 lI ullting, %' p late movt., 17 je wels, double roller

C HAnE 979 H unti ng:. ~ p late movt., 19 jewels, double roller

C HADE 748 (two piece barr el bridqc)

Hun ting, U p la te movt., 18 jewels. double /'Oller. dlr' cct dr i ve ce nt e r seconds

C HADE 751, Hun ting:. ~ plate movt. .. 19 jcwe ls. double roller

C HADE 982M Opcn face, ;i plate movt., I!) jewel s, double roller

c

c c

c

c C

I

I , r E E , £ C , II:

II: I: c: t I:

t E t r: r: r: I: r: r: r: r: r: r: r: I:


18/0 SIZE

GRADE 989 OPOD face, J!.i plate movt., 17 jewels, double roller

21/0 SIZE

GRADE 721 Open face, %" platemovt .. 17 jewels, dOll ble roller

GRADE 911 Open face, J!.i platemovt., 17 jewels, double rolle r

GRADE 750 Open face, ;i plate movt., 17 jewels, double roller

GRADE 751 Open face, %' pJatemovt., 17 jewels, double roller

22/0 SIZE

20/0 SIZE

GRADE 997 Open face, J!.i plato movt., 17 jewels, double roller

GRADE 995 Open face , %' platemovt., 17 jewels, double roller

GRADE 911iVl Open face, %' plate movt., 17 jewels, double roller

When and as new Hamilton movements are released plate illustrations on gummed paper will be furnished to paste on this page.

ALWAYS USE GENUINE HAMILTON MATERIAL

7

DESCRIPTION OF HAMILTON WATCH GRADES

Grade I'\ 'u .

924 ,

925 .

926,

921.

928 ,

929.

930 ,

93] ,

932.

93 3.

934 .

935 ,

936,

93 7,

938,

939 ,

18 SIZE

Delfr "i",j""

o.,,~ .. Full plate !nO \' !. , 17 jewels, S. R .

Btg., 17 jewels. S. R .

O. F " 17 jewels, S.n.

B tg .. 17 jewels, S. R.

C.F .. 15 jewels, S.n.

H [ g .. 15 jewels. S, I{ ,

O.F .. 1(; jewels, s. n .

H tg., ](l jewels. S. R .

O.F. IG jewels, S.n.

lilg . , 16 jewels. S. R .

O.P .. 17 jewels, s.n. H tg .. 17 jewe ls, S.R.

0 . 1" .. 17 jewels, S. H. and O . H .

D tg .. 17 jewels, S. H.. an d O . R .

O.F., 17 jewels, D . R .

Elg .. 17 jewels, D .n .

9" 0, O.F .. 21 jewels. S. n . a nd n .R .

941 , H tg: .. 21 jewels. fi. R . and D .R .

942 , O.F .. 21 jewels, D .n .

943 , ll tg .. 21 jewels, D , B .

944, o. r " 19 jewels, 0 H.

946, O. I~ .. 23 je wels, O . R .

948, C.F .. 17 jewels. D. R .

16 SIZE 95U , O.F .. brIdge movt-, 23 jewe ls, D .R .

950n . O.F .. bridge movt" 23 jewe ls. D .R

950E. O.P" bridge movt." 23 j e wc ls. n . R .

952, O. F'" brid ge movt.., 19 je we ls. D . R .

9 5 4 . O. P " ~~ p late mO \' L , 17 jewels, D .R .

956.

960 ,

96 1,

962,

963,

96 '~ ,

965,

966 ,

96i,

968,

969,

9iO .

9i1.

9i2 ,

9i3 ,

9i4,

8

O.P" ~1 plate mO\' L . 17 jewe ls, S. R.

O.F .. bridge tuovt.., 2 1 jewe ls, D .R.

B tg" bridge mon .. 2 1 jewcl s, D .H.

O.F . bridge mov t." 17 jewels, D.R.

iltg .. bridge mov t. . 17 jewels, D.R.

O.F., bridge mo vt·., 17 j ewels, S. H.

E tg., bridge movt., 17 j ewels , S. R .

O.P .. ~ plate m ovt .. 17 jewels. n .R.

B tg .. ~ plat e movt .. 17 j ewels. D .R.

O . F" U plate movt .. 17 jewels. S. R .

Hlg. , ~ plate movt., 17 jewels. S. R .

O . F " U plate movt., 21 jewe ls, D .R .

H lg. , ~ plate movt. , 21 jewe ls. n .R .

O.P" ~ plate movt., 17 jewels. S. R . a nd D .R.

Etg., ~ plate IUOvt.., 17 j ewel s, S. R. a nd D .R.

O. F" U plat.e movt . , 17 jewels. S. H. and D .R.

Crudc . '\'0 .

9iS ,

9i6 ,

9ii.

9i8.

990.

99 1.

V esc.·i,. , io"

L-Itg " ~ l~ia tC rnov t .. 17 jewels. S. R .

0 .1" .. ~ p lat.e 1ll0 \' t .. 16 jewels, S. R .

Htg" ~ p la te movt-, 16 jewels. S.R.

O . P" ~ p late movt. . 17 jewels, n .R.

0.1" .. ~ p late movt., 21 j ewels. n .R .

H tg" ~ p late Tllovt .. 2 1 jewels . n .R .

992. O.P .. %' p la t·e m ovt .. 2 1 jewels. S. R . and n. R .

99 2 l:J . O. F " %' p la t·e Tll Ovt. .. 2 1 jewels, n .R .

91J2E . OY" %' p la to m ov t " 2 1 jewcls. n .R .

993, H tg .. ~ pla to TllOy t" 21 jewels. n .R.

994.

996.

900 .

902.

910.

9 12.

9 14.

916.

9 13,

92U .

92 2.

400.

9 1 i.

92 1.

O. F " brid ge m ovt .. 21 jewels, n .R.

O.F .. ~ plate movt." 19 jewels. n .R.

12 SIZE

0 .1" .. b ridge mO\'t" 19 jewels. D.H.

0. 10' ., bridge movt. . 19 jewels. D .R.

O . F .. brh.lge m ov t .. 21 jewels. D . R .

O.F .. ~ p lat-c movt .. 17 jewels. D. R .

0.1" .. ~ pla t e 1110vt .. 17 jewels. D . R .

O. F .. U p la t·e 1\10 vt., 17 jewels. D . R .

0. 1-' .. :l1 pla to 1I10 vt., 17 jewels. D . R .

0. 1" .. %' p l,. t o m ovt .. 19 j ewels. D .H .

O. F., b rl dgo movt .. 2:3 jewels. D . R.

O . li' .. brIdge rHovt., 23 jewels. D .H .

t hin, 0, ]0' " b ri dge m ovt.. 21 jewels. D .H .

10 SIZE

O.F., ,.{ p lute mo \' t .. 17 jewels. D .R .

0,1<' .. b ridge mo \' t. , 2 1 jewels. D .R .

923, O. r·' .. b r ldgo movt., 2:1 jewels. D . R .

o SIZE

981. H tg. , :l1 plat o mo vt .. 17 jewels . D .n .

983. Btg .. br'idge m ovL., 17 jewels. n .R.

985. H tg., b ridge m o \' t .. 19 jewels, n .R .

6/0 SIZE

9i9 . Htg .. ~ p la te movt., HI jewels. n .R.

986 . O. l-' .. U plate m ovt.. 17 jewels, n .R.

986 ,\ . O.F .. U I)lat e mov t. . I7 jewels. D .R.

98 7. H tg .. U p la t e mo \' t .. I7 jewels, n .R .

9RiA. n t.g .. ~ plate nw v t ., 17 jewels. D .R .

98i£. Uq; .. '~ pl ate mov L., 17 jewels. n .R .

98iF. II tg .. ~' pla Le m O\' t .. , 17 jewels, n .R .

98 7S . IHg .. U plate rllovt .• 17 jewels. n .R.

988 , O . F .. %' pla. t o TllOvt., 17 jewels , n .R.

G rfHl e

I"" .

7011 .

746.

40 1,

752 .

8/0 SIZE

O . F .. ~ plate movt .. 17 jewels . D . H.

O. F .. ~.{ p la te mo\'t. .. 18 jewels. n .R .

12/0 SIZE

0 . 1-' .. ~ p late m ovt.. 19 jewel s, D .R.

NEW 12/0 SIZE

0. 1>' .. M p la te m ovt .. 17 jewels. n .R.

0 . 1<' .. U plate movt.. 19 jewels. D.R.

O.li' .. '1 pla te movt .. 19 jewels. D . R .

14/0 SIZE

980 . 0. 1<' ., %' l)!atc mon .. 17 jewels, D .n..

9110 ,\ , O. F ., M 1)la te movt .. 17 jewels. D .H.

9800 , 0 Ii' %' p la te rn ovt., 17 jewels. D .n..

9112 , O . F .. U p late mon., 19 jewels. D .R .

9112M. 0 . 1"" H plate movt.. 19 jewels. D .R.

18/0 SIZE

989, 0. 1" .. M plate mo \' t. 17 jewels, D .H .

989£ . O. F .. '1 111ate mo \' t .. 17 jewels. D . R .

20/0 SIZE

997, 0. 1"., U 1)lato movt., 17 jewels. n . H.

21/0 SIZE

i2 I , O.F., ~ plate mo\·( .. 17 jewels. D .R .

750 , O . li' .. M p late movt. , 17 jewels. n .R .

iSl, 0 F .. M pla te m ovt., 17 jewels. D . R .

995 . 0 V M p late movt .. 17 jewels. D .R.

995A , 0. 1" .. M p late mo \' t .. 17 jewels. D .R .

22/0 SIZE

911. 0 ]1'. , M pla Le rno \' t .. 17 j ewels. D R.

9111\1 . 0 I"., M pl ate rnovt., 17 jewels. n .R.

c

~ SERIAL NUMBERS AND GRADES 'it J

:I :J

No. Grade No. Grade No. Grade No. Grade No. Grade

1-20 936 32001-300 026 58101-200 074 77701-900 975 12 1001-500 041

21-30 932 32301-700 930 58201-300 972 77901-78000 077 12 150 1-122000 943

31-60 936 32701-33000 934 58301-400 066 7800 1-500 970 122001-300 040

6 1-400 932 33001-500 931 58401-500 97. 78501-700 972 122301-400 942

:3 401-1000 936 33501-800 927 58501-600 972 78701-900 97. 122401-123000 940

1001-20 937 33801-34000 035 58601-800 074 78901-79000 976 123001-124000 941

;I 1021-30 933 34001-500 028 58801-59000 976 79001-100 073 124001-100 042

1031-60 937 34501-700 930 59001 -300 973 79101-300 975 124101-800 940

1061-1100 933 34701-800 926 59301-500 967 79301-700 977 124801-125000 942

:3 1101-300 937 3 4801-35000 934 59501-700 975 79701-900 975 125001-126000 927

1301-600 933 35001-800 931 59701-60000 977 79901-80000 973 126001-127000 92.

1601-2000 937 35801-36000 935 00001-500 976 80001-200 972 12700l~128000 941 .. 2001-3000 7J 36001~37000 928 60501~700 974 80201-400 97. 128001-129000 936

300l~100 931 37001-38000 929 60701~61000 97. 80401~600 970 129001~130000 925

:J 3101~500 935 3800 1~500 92. 61001~200 975 8060 1~700 972 130001~500 924

3501~600 931 38501~600 930 61201-500 977 80701~900 97. 130501~131000 926

3601~900 935 38601~OOO 93' 61 501~600 973 80901~81000 976 131 001-132000 925

i! 3901-4000 931 38901-39000 926 6 1601-800 975 8 1001-300 961 132001-100 926

4001-300 930 39001-200 931 6 1801-62000 977 81301-500 965 132101-200 934

I! 4301-5100 934 39201-500 935 6200 1-100 972 8 1501-82000 961 132201-500 926

5101-400 926 39501-700 927 62101-300 974 82001-300 972 132501-133000 92'

5401~600 934 39701-900 935 6230 1-500 976 8230 1-500 97. 13300 1-134000 937

! 5601-6000 930 39901-40000 931 62S01-700 974 82501-600 970 134001-135000 92.

6001-600 936 40001-200 930 62701-900 972 8260 1-700 972 135001-136000 925

iI 6601-700 938 4020 1-500 934 6290 1-63000 974 82701-800 97. 136001-137000 926

6701-800 936 40501-41000 926 63001-500 977 82801-900 968 137001-100 11J

6801-7000 932 41001-S00 929 63501-600 975 82901-83000 97. 137I0l ~138000 927

!! 7001-10 17J 41501-42000 927 63601-800 977 83001-400 977 138001-139000 940

7011-600 937 42001-43000 999 6380 1-900 975 83401-500 971 139001-140000 937

7601-700 939 43001-300 941 6390 1-64000 973 83501~700 975 140001-300 938

~ 7701-800 937 43301-500 943 64001-100 970 83701-800 973 140301- 141000 942

780 1-8000 933 43501-700 937 64 101 -200 972 83801-900 975 141001-142000 941

1:1 8001-700 936 43701-900 941 64201 -300 974 83901-84000 909 142001-143000 940

8701-800 938 43901-44000 943 64301-600 972 84001-400 974 143001-100 927

8801-9000 936 44001-02 21J 64601-700 976 84401~500 970 143101-144000 925

II 9001-300 937 44003-400 938 64701-900 974 84501-700 972 144001-145000 92.

9301-600 939 44401-500 942 64901 -65000 976 84701-800 968 145001-146000 925

\I 9601-800 937 44501-45000 93. 65001-200 973 84801-85000 976 146001-400 93'

9801-900 933 45001-46000 929 65201-300 977 85001-200 937 146401-147000 92.

9901-10000 939 46001-500 926 65301-400 975 85201-900 941 147001-148000 927

II 10001-200 938 46501-800 934 65401-500 973 85901-86000 943 148001-149000 940

10201-400 936 46801-47000 930 65501-700 977 86001-87000 928 149001-150000 925

II 10401-50 932 47001-500 927 65701-900 975 8700 1-88000 929 150001-151000 92.

10451-500 930 47501-700 935 65901-66000 977 88001-500 926 151001-400 927

10501-700 938 47701-48000 931 66001-200 976 88501~89OO0 930 151401-500 935

!3 10701-900 936 48001-05 942 66201-300 974 89001~500 941 151501-152000 927

10901-11000 938 48006-300 940 6630 1-500 972 89501-90000 937 152001-153000 936

11001-12000 936 48301-500 942 6650 1-600 976 90001-100 926 153001-154000 941

12001-200 939 48501-900 940 66601-700 974 901O1~95O 999 154001-155000 936

12201-13000 937 48901-49000 942 66701 -800 972 91001-92000 925 155001-156000 927

i3 13001-400 999 4 9001-400 927 66801-67000 974 92001-200 940 156001·157000 940

13401~14000 938 49401-900 925 67001~100 977 92201-93000 936 157001-158000 925

14001-15000 999 49901-50 llJ 67101-300 975 93001-94000 927 15800 1-1 59000 940

~ 15001-300 939 50071-500 962 6730 1-600 973 94001-003 934 159001-160000 941

15301-1 540 1 2IJ 50501~750 960 67601-800 975 94004-95000 928 160001-161000 940

II 15302-700 937 50751-50850 964 67801-68000 977 95001-96000 923 161001-162000 941

15701-16000 939 50851-51000 960 68001 -800 060 96001-100 942 162001-163000 926

16001-100 931 51001-51300 16, 6880 1-69000 964 96101-700 940 163001-164000 943

I 16 101-200 930 51301-400 963 6900 1-100 977 96701-97000 936 16400 1-165000 940

16201-300 927 51401-650 961 69101-200 975 97001-900 929 16500 1 ~ 166000 925

16301-400 931 51651-750 965 69201-400 973 97901-98000 927 16600 1-167000 924

iI 16401-600 927 5 1751-52000 961 6940 1-600 975 98001-99000 924 16700 1-168000 927

16601-17000 931 52001-300 16, 69601-70000 977 9900 1-100000 925 16800 1-169000 940

iI 17001-500 929 52301-500 97. 70001-200 976 100001-101000 924 16900 1-400 935

17501-18000 931 52501-700 97. 70201-400 970 101001-102000 925 16!HOI-170000 927

18001-200 928 52701-800 966 70401-600 968 102001-103000 922 17000 1-171000 999

i3 18201-300 926 52801-53000 976 70601-900 972 103001-104000 927 171001-172000 925

18301-500 928 53001-53070 16, 70901-71000 974 104001~105000 940 17200 1- 100 934

:I 18501-19500 930 53071-53500 977 71001-200 975 105001-500 925 172101-173000 926

19501-700 926 53501-900 975 71 201-500 971 105501-106000 927 173001-174000 925

19701-20000 930 53901-54000 967 71501-700 975 106001-107000 940 17400 1-175000 92.

g 20001-300 93. 54001-200 972 71701-90 973 107001-400 941 175002-176000 HWW·

20301~5oo 92. 54201-300 974 71 79 1-800 969 107401~500 943 175001-699 HWW·

20501-21000 999 54301-500 976 71 801-900 977 107501-800 941 176001-177000 940

21001-300 935 54501-700 97' 71001-72000 975 107801-108000 943 177001-178000 927

21301-500 927 54701-800 968 72001-100 97' 108001-200 928 178001~179000 942

g 21501~800 935 54801-55000 976 72101-300 976 10820 1-109000 926 179001-500 935

21801-22500 927 55001-300 973 72301-600 97. 109001-500 927 17950 1-180000 927

22501-800 931 55301-600 977 7260 1-700 968 10950 1-110000 925 180001-18 1000 940

g 22801-23000 935 55601-700 969 72701-900 976 110001-900 940 18 1001-182000 941

23001-200 928 55701-800 977 7290 1-73000 972 110901-111000 942 182001 -300 926

a 23201-500 7J 55801-56000 975 73001-200 975 111001-500 937 182301-400 934

24001-500 926 56001-300 974 73201-300 973 111501-112000 941 182401-183000 926

24501-25000 934 56301-500 976 73301-74000 977 112001-200 928 183001-184000 941

g 25001-100 llJ 56501-600 966 74001-400 974 112201-113000 926 184001-185000 940

25101-400 927 56601-800 972 74401 -600 972 113001-114000 925 185001-1 86000 925

111 25401-800 931 56801-900 974 74601-75000 976 114001-003 940 186001-187000 942

25801-26000 935 56901-57000 976 75001-76799 H'VW· 114004-115000 936 187001-188000 927

26001-500 930 57001-300 977 76002-76800 HWW* 115001-116000 927 18800 1-189000 924

a 26501-27000 928 57301-500 975 77001-100 969 116001-117000 940 189001- 190000 925

27001-28000 929 57501-600 973 77101-300 973 117001-118000 925 190001-191000 926

28001-29000 999 57601-800 975 77301-500 975 118001-119000 999 191001-192000 927

II 29001-800 927 57801-58000 977 77501-600 971 119001-120000 925 192001-193000 92.

29801-30000 935 58001-100 972 77601-700 973 120001-121000 924 193001-194000 920

II .Haydn W. Wheeler model

I :>

SERIAL NUMBERS AND GRADES

No. Grade No. Grode No. Grade No. Grade No. Grade 194001-195000 926 275002-100 HWW· 317601-700 969 355001-800 975 404001-405000 926 195001-500 935 275102-200 HW"\V* 317701-318000 973 355801-900 973 405001-406000 92. 19550 1-196000 927 275202-460 HWW* 318001-100 972 355901-356000 993 406001-407000 940 196001-197000 92. 275462-500 HWW· 318101-900 97. 356001-500 990 407001-408000 92. 197001-198000 937 276001-277000 940 318901-319000 970 356501-357000 974 408001-416000 940 198001-199000 936 277001-278000 941 319001-100 971 357001-358000 975 416001-417000 926 199001-200000 925 278001-279000 9'0 3 19101-320000 97. 358001-359000 974 417001-418000 940 200001-201000 926 279001-280000 925 320001-300 972 359001-360000 975 418001-419000 926 201001-202000 025 280001-281000 936 320301-400 968 360001-550 960 4 1900 1-420000 941 202001-500 926 281001-282000 927 320401-321000 974 360801-361000 960 420001-421000 940 202501-203000 934 282001-283000 926 321001-200 973 361001-100 993 421001-422000 926 203001 -204000 927 283001-284000 925 321201-322000 975 361101-300 991 422001-423000 924 204001-100 934 284001-500 93' 322001-323000 974 361301-400 993 423001-425000 926 204101-500 926 284501-900 92. 323001-700 975 361401-700 975 425001-426000 92. 204501-205000 93' 284901-285000 999 323701-324000 973 361701-20 973 426001-500 936 205001-206000 941 285001-286000 925 324001-325000 9.0 361721-362000 975 426501-427000 944 206001-207000 9.0 286001-287000 9'0 325001-100 965 362001-900 97. 427001-428000 92. 207001-208000 927 287001-288000 927 325101-326000 961 362901-363000 990 428001-429000 926 208001-900 999 288001-289000 940 326001-327000 97' 363001-364000 975 429001-430000 92' 208901-209000 940 289001-290000 927 327001-300 971 364001-365000 974 430001-431000 924 209001-210000 925 290001-800 93. 327301-500 973 365001-100 975 431001-432000 92. 210001-211000 940 290801 -291000 938 327501-328000 975 365101-300 973 432001-433000 940 211001-212000 927 291001-292000 925 328001-300 992 3 65301-366000 975 433001-434000 92. 212001-213000 9.0 292001-500 940 328301 -500 990 366001-367000 97. 434001-500 940 213001-500 941 292501-293000 942 328501-329000 992 367001-500 975 434501-600 942 2 13501-600 .37 29300 1-294000 925 329001-330000 97. 367501-368000 993 434601-435000 946 213601-214000 925 294001-295000 926 330001 -100 992 368001-369000 97' 435001-436000 92' 214001-215000 92' 295001-296000 927 330101-500 990 369001-370000 992 436001-438500 940 215001-216000 927 296001-297000 9'0 330501-331000 992 370001-100 990 438501-800 946 216001-217000 9'0 297001-298000 927 331001-200 973 370101-400 992 438801-900 942 217001-218000 927 298001-299000 9.0 331201-400 97. 370401-500 974 438901-440000 946 21 800 1-219000 940 299001-300000 925 331401-500 969 370501-800 990 440001-441000 924 219001-220000 925 300001-300 972 331501-700 971 370801-371400 992 441001-442000 940 220001-221000 92. 300301-500 970 331701-BOO 973 371401-500 972 442001-400 946 221001-222000 927 300501-900 97' 331801-332000 975 371501-373500 97. 442401-500 9.2 222001-223000 926 300901-301000 9.8 332001-200 992 373501-700 990 442501-443000 94. 223001-02 927 301001-400 975 332201-800 972 373701-374000 992 443001-444000 92. 223003-04 941 301401-500 971 332801-333000 97. 374001-200 97. 444001-445000 92. 223005 937 301501-302000 973 333001-500 975 374201-700 990 445001-446000 927 223006-224000 927 302001-100 990 333501-700 971 374701-375000 974 446001-441000 92. 224001-225000 92' 302101-200 992 333701-900 973 375001-100 993 447001-448000 925 225001-226000 927 302201-300 990 333901-334000 975 375101-500 991 448001-449000 92. 226001 -227000 940 302301-900 {)92 334001-200 972 375501-376000 975 449001-450000 924 227001-228000 925 302901-303000 990 334201 -800 992 376001-200 972 450001 -451000 926 228001-229000 924 303001-100 973 334801-335000 990 376201-500 974 451001-452000 92' 229001-230000 92. 303101-300 971 335001-600 975 376501-377000 992 452001-453000 940 230001-500 92. 303301-800 975 335601-800 971 377001-200 973 453001-454000 924 23050 1·231000 92' 303801-304000 973 335801-900 973 377201-378000 975 454001-456000 940 231001-565 937 304001-100 970 335901-336000 97. 378001-379000 974 456001-457000 999 231566-232000 927 304101-400 972 336001-200 972 379001-380800 992 457001-458000 940 232001-233000 940 304401-305000 97. 336201-337000 974 380801-38 1000 990 45BOOI-4590oo 999 233001-234000 941 305001-100 973 337001-338000 975 381001-382000 992 459001-110 946 234001-235000 940 305101·200 971 338001-200 974 382001-100 990 459111-118 942 235001-236000 941 305201-300 969 338201-900 992 382101-383000 974 459119-200 946 236001-237000 93. 305301-900 975 338901-339000 990 383001-300 992 459201-700 942 237001-238000 941 305901-306000 973 339001-300 971 383301-700 990 459701-460000 94. 238001-239000 926 306001-400 972 339301-500 973 383701-384000 972 460001-461900 94.0 239001 -500 9.3 306401-307000 974 339501-340000 975 384001-700 97. 461901-462000 940 239501-240000 941 307001-100 975 340001-200 97. 384701-900 972 462001-463000 999 240001-241000 940 307101-300 971 340201-300 972 384901-385000 974 463001-500 940 241001-242000 941 307301-400 975 340301-600 970 385001-600 972 463501-464000 940 242001-243000 940 307401-500 973 340601-341000 974 385601-800 974 464001-466000 926 243001-244000 927 307501-600 975 341001-200 973 385801-386000 990 466001-467000 924 244001-245000 93. 307601-700 971 341201-342000 975 386001-800 974 467001-468000 926 245001-246000 925 307701-900 975 342001-300 990 386801-900 992 468001-469000 940 246001-247000 940 307901-308000 969 342301-343000 992 386901-387000 972 469001-470000 924 247001·248000 927 308001-700 990 343001-344000 975 387001-100 990 470001-471000 926 248001-249000 940 308701-309000 992 344001-200 970 387101-900 992 471001-472000 94. 249001-250000 927 309001-100 971 344201-400 972 387901-388000 972 472001-473000 924 250001-251000 92. 309101-400 973 344401-345000 974 388001-400 990 4-73001-474000 940 251001-252000 927 309401-310000 975 345001-346000 975 888401-389000 992 474001-475000 92' 252001-253000 924 310001-400 970 346001-300 992 389001-391000 974 475001-476000 940 253001-254000 925 310401-311000 97. 346301-347000 974 391001-300 972 476001-477000 924 254001-255000 940 311001-700 975 347001-180 993 391301-392000 97. 477001-478000 9.0 255001-256000 925 311701-312000 973 347181-200 991 392001-800 992 478001-479000 926 256001-257000 92. 312001-200 970 347201-300 975 392801-393000 990 4-79001-480000 9 •• 257001-258000 941 312201 -500 972 347301-400 973 393001-400 975 480001-481000 926 258001-259000 924 312501-600 9.8 347401-700 993 393401-600 973 481001-482000 927 259001-260000 9., 312601-313000 974 347701-900 991 393601-394000 993 482001-483000 924 260001-261000 940 313001-100 973 347901-348000 973 394001-200 972 483001-484000 92. 261001-262000 927 313101-400 971 348001-200 970 394201-395000 97. 484001-485000 940 262001-263000 92. 313401-600 969 348201-800 974 395001-100 993 485001-486000 925 263001-264000 925 313601-314000 975 348801-349000 972 395101-900 991 486001-487000 999 264001-265000 940 314001-600 97. 349001-350000 975 395901-396000 993 487001-488000 92. 265001-266000 927 314601-900 972 350001-300 990 396001-397000 992 488001-489000 999 266001-267000 9'0 314001-315000 970 350301-400 974 397001-200 990 489001-492000 92. 267001-268000 925 315001-100 971 350401-600 990 397201-398000 992 492001-493000 940 268001-269000 940 315101-400 973 350601-351000 992 398001-200 972 493001-494000 9.6 269001-270000 927 315401-316000 975 351001-352000 975 398201-399000 992 494001-495000 944 270001-271000 940 316001-200 992 352001 -100 968 399001-600 993 495001-496000 940 271001-272000 925 316201-300 972 352101-353000 974 399601-400000 975 496001-497000 925 272001-273000 926 316301-500 992 353001-354000 975 400001-401000 92. 497001-498000 99. 273001-274000 9'1 316501-317000 972 354001-400 992 401001-402000 9'0 498001-499000 93. 274001-275000 924 317001-600 975 354401 -355000 97' 402001-404000 92' 499001-501000 940

·Haydn W. Wheeler model

10

3 ~ SERIAL NUMBERS AND GRADES

:'I

:3

~ No. Grade No. Grade No. Grade No. Grade No. Grade

501001·900 926 B625001-626000 999 Ball 717201-718000 975L 776701-777000 975 836901-837000 974P

::J 501901-502000 934 626001-627000 926 718001-721500 974 777001-300 972 837001·838000 975P

502001-503000 926 B626001-627000 999 Ball 721501-722000 992 777301-778300 974 838001-839000 975L

503001-504000 999 627001-628000 924 722001-724000 974 778301-800 992 839001-400 974L

1 504001-507000 940 B627001-62800D 999 Ball 724001-725000 972 778801-900 972 839401-700 992L

507001·508000 999 628001-630800 925 725001-726000 974 778901-779300 974 839701-840000 990L

::J 508001-509900 940 B628001-63080D 999 Ball 726001-727000 992 779301·780100 992 840001-400 952L

509901-510000 942 631001-636000 940 727001-728000 974 780101-300 972 84040 1-900 950L

510001-511500 940 B631001-636000 999 Ba.ll 728001·729000 992 780301-781300 992 840901-841000 952L

1 511501·700 942 636001·637000 941 729001·730000 975 781301-400 972 841001·842000 975P

511701-517000 940 B636001-637000 999 Ball 730001-731000 992 781401-500 974 842001-843000 974L

517001-519000 924 637001-638000 936 731001-732000 975 781501-782000 992 843001-844000 974P

:) 519001-521000 925 B637001-63 8000 999 Ball 732001-734000 992 782001·783000 975 844001-200 993

521001-523000 944 638001-639000 926 734001-735000 975 7 83001-600 992 844201-845000 975

~ 523001-524000 946 B638001-639000 999 Ball 735001-736000 974 783601-784000 974 845001-200 992

524001-531000 940 639001-640000 925 736001-738000 975 784001-785000 992 84520 1-400 972

531001-532000 926 B639001-64oo00 999 Ball 738001-739000 974 785001-500 952 845401-700 954

~ 532001-10 934 640001-642000 924 739001-740000 975 785501-786000 950 845701-846000 972

532011-533000 926 B640001-644400 999 Ball 740001-100 974 786001-787000 992 846001-500 952

:a 533001-535500 999 644401-645000 940 740101-200 972 787001-400 974 846501-847000 950

535501-536000 940 645001-645500 927 740201-900 974 787401-788000 972 847001-200 972

536001-537000 936 B645001-645500 999 Ball 740901-741000 975 788001-791300 992 84720 1-849000 97.

:J 537001-538000 924 645501-646000 925 741001-742000 992 791301-792600 974 849001-850000 975

538001-543000 940 B645501-646000 999 Ball 742001-743000 974 792601-900 972 850001-300 992

:) 543001-544000 927 646001-647000 92. 743001-300 975 792901-793700 992 850301-800 990

544001-200 934 B646001-647000 999 Ball 743301-400 993 793701-900 990 850801-851000 972

544201-545000 926 647001-648000 940 743401-744000 975 793901-794000 992 851001-400 993

::) 545001-546000 925 B647001-648000 999 Ball 744001-500 974 794001-200 972 851401·852000 975

546001-547000 924 648001-649000 940 744501-745000 992 794201-795000 974 852001·853000 992

547001-548000 92. B648001-649000 998 Ball 745001-747000 975 795001-796400 992 853001-854000 974

:1 548001-549000 999 B649001-650oo0 998 Ball 747001-700 97. 796401-800 972 854001-600 950

549001-551000 946 B650001-651000 999 B all 747701-748000 972 796801-797200 974 854601-900 952

:J 551001-553000 944 651001-652000 940 748001-749500 992 797201-500 954 854901-855100 960L

553001-555000 940 B651001-652000 998 B all 749501-750000 974 797501-798000 974 855101-856000 950L

555001-556000 93. 652001-652700 924 750001-100 9., 798001-500 990 856001·857840 975

:) 556001-558000 924 B652001-652700 998 Ball 750101-200 961 798501-800 972 857841-858000 975L

558001-560000 925 652701-652800 92. 750201-700 950 798801-799000 974 858001-500 974

:J 560001-561000 999 652801-652900 927 750701-751000 952 799001-200 954 858501-859000 972

561001-562000 926 652901-653000 937 751001-752000 960 799201·600 992 85900 1-860000 974

562001-564000 924 653001-655000 940 752001-500 952 799601-800000 954 860001-862300 992

~ 564001-565000 926 B653001-655000 999 B all 752501-753000 950 800001-802000 974 86230 1-400 954

565001-568000 940 655001-655200 924 753001-500 952 802001-200 954 862401-500 972

568001-569000 936 B655001-655200 999 Ball 753501-754000 950 802201-2 972 862501 ·600 954

:;1 569001-571000 924 655201-656000 924 754001-100 960 802203-300 954 862601-800 972

571001-576000 940 656001-657000 926 754101-500 952 802301-500 972 86280 1-863000 974

:a 576001-200 942 657001-659000 927 754501-755000 960 802501-803700 974 86300 1-864000 992

576201-578000 940 659001-660000 925 755001-400 992 803701-804200 954 864001-865000 975

578001-580000 924 660001-661000 927 755401-500 974 804201-806000 974 865001-866000 992

~ 580001-582000 926 661001-662000 924 755501-700 972 806001-807000 975 866001-600 974

58200l-ti84ooo 925 662001-664000 940 755701-900 974 807001-500 993 866601-700 954

~ 584001-585000 927 664001-666000 924 755901-756000 972 807501-808800 975 866701-867000 972

585001-587000 999 666001-667000 940 756001-757000 974 808801-809000 993 867001-868000 975

587001-592000 940 667001-668000 941 757001-300 975 80 9001-500 974 868001-869000 992

~ 592001-593000 926 668001-669000 926 757301-500 993 809501-600 972 869001-870000 975

593001-594000 924 669001-670000 999 757501-758000 975 809601-810000 974 870001-872000 992

~ 594001-601000 940 670001-100 937 758001-100 972 810001 -300 990 872001-200 993

B600001-601000 999 Ball 670501-673000 925 758101-759000 992 810301-812000 974 872201-874000 975

601001-601800 92. 673001-675000 926 759001-760000 975 812001-700 992 874001-800 974

::I B601oo1-601800 999 Ball 675001-677000 940 760001-400 992 8 12701-8 13000 974 87480 1-875000 975

601801-602000 934 677001-678000 924 760401-600 972 813001-814000 974P 875001-300 952

B601801-602oo0 999 Ball 678001-679200 927 760601-800 974 814001-800 974L 875301-876000 975

~ 602001-603000 926 679201-680000 92. 760801-761000 992 814801-8 15900 992 876001-600 993

B602oo1-603000 999 Ball 680001-685000 924 761001-400 975 815901-816000 974L 876601-877000 975

;:J 603001-604000 926 685001-687000 940 761401-600 993 816001-817000 974P 87700 1-400 992

B603001-6040oo 999 Ball 687001-688000 925 761601-762000 975 817001-819000 974L 877401-700 975

604001-605000 926 688001-689000 946 762001-200 992 819001-820000 974P 877701-878000 993

~ B604001-6050oo 999 Ball 689001·694000 940 762201-300 972 820001-821500 974L 878001-879400 975

605001-606000 925 694001-696000 924 762301-763000 974 821501 -822000 990L 880001-600 992

~ B605001~606000 999 Ball 696001-697000 941 763001-300 993 822001-700 992L 880601-882400 974

606001-607000 925 697001-700000 924 763301-600 973 822701-823000 974L 882401-883400 992

B606001-607000 999 Ball 700001-702000 974 763601·764000 975 823001-824000 974P 883401-884100 974

~ 607001-608000 925 702001-703800 992 764001-300 992 824001·826000 975P 884 101-885300 992

B607001-6080oo 999 Ball 703801-704000 990 764301-400 972 826001-500 975L 885301-886000 974

:::J 608001-613000 924 704001-400 992 764401-765000 974 826501-827000 993 886001-887000 992

B608001-613OO0 999 Ball 704401-705000 990 765001-300 992 82700 1-828000 975P 887001-300 974

613001-614000 925 705001-700 972 765301-767000 974 828001-829000 974L 887301-890300 992

~ B613OO1-614ooo 999 Ball 705701-706000 974 767001-600 992 829001-830000 974P 890301-891000 974

614001-616500 924 706001-707000 990 767601-800 972 830001-500 990L 891001-600 992

B614001-616500 999 Ball 707001-800 972 767801-768000 974 830501-831000 992L 891601-892200 978

:::J 616501-617000 934 707801-708000 990 768001-769000 975 831001-100 954P 892201-896200 992

B616501-617oo0 999 Ball 708001-709500 975 769001-700 992 831101-200 972P 896201-897800 974

~ 617001-619000 92. 709501-710000 973 769701-770000 972 831201-500 954P 897801-898000 972

B617oo1-619ooo 999 Ball 710001-800 993 770001-100 974 831501-832000 974P 898001~899100 992

619001-620000 927 710801-711000 991 770101-771200 992 832001-400 974L 899 101-500 978

~ B619001-620000 999 Ball 711001-300 973 771201-400 972 832401-833000 992L 899501-900000 974

620001-622700 940 711301-712000 975 771401-772000 974 833001-834000 990L 900001-902000 940

~ B620001-622700 999 Ball 712001-600 993 772001-773000 975 834001-600 974P 902001-904000 926

622701-623000 942 712601-713000 991 773001-800 992 834601 · 800 974L 9O'iuOI-906000 924

B622701-623000 999 Ball 713001-714900 975 773801-774000 972 834801-835000 974P 906001-914000 940

:I 623001-624000 941 714901-715000 991 774001-775000 975 835001·600 992L 914001-916000 92.

B623001-624000 999 Ball 715001-716000 993 775001-500 952 835601-800 990L 916001-917000 927

624001-625000 93. 716001-100 972 775501-776000 950 835801-836000 974L 917001-919000 925

::1 B624001-625ooo 999 Ball 716101-717000 974 776001·300 973 836001-500 974P 919001-921000 940

62.5001-626000 925 717001-200 991 776301-700 993 836501-900 954P 921001-923000 92'

::J 11

SERIAL NUMBERS AND GRADES

No. Grade No. Grade No. Grade No. Grade No. Grade

923001-500 999 1052001-500 n72P 1155001-200 99.P 1270001-1271700 956P 1356001-1357000 974P

923501-924000 925 1052501-900 954 1155201-500 994L 1271701-1272000 974P 1357001-1359800 992L

924001-926000 9'0 1052901-1053000 97' 1156001-1158000 996L 1272001-1274000 996L 1359801-1361000 996L

926001-100 927 1053001-1054000 992 1158001-1160000 974P 1274001-500 993L 1361001-1362000 992L

927001-929000 92. 1054001-1056000 974 1160001-1162000 992L 1274501-700 992L 1362001-600 974P

929001-933000 92' 1056001-1057000 975 1l62001-5oo 903L 1274701-1275000 992L 1362601-1363000 956P

933001-935000 925 1057001-1061300 992 1162501-1164000 992L 1275001-1276000 972L 1363001-1364000 992L

935001-937000 926 1061301-1062300 972 1164001-1166000 974P 1276001-1277000 974I~ 1364001-1365000 975P

937001-039000 9.0 1062301-1066000 992 116600 1-1167000 974L 1277001-1278000 992L 1365001-800 95ap

939001-941000 92. 1066001-1068000 974 1167001-1168000 956P 1278001-1279000 975P 1365801-1367000 974P

941001-944000 9.0 1068001-1069000 975 1168001-1169000 975P 1279001-1280000 974P 1367001-1369400 992L

944001-949000 926 1069001-1070000 97. 1169001-1170000 974P 1280001-1281000 992L 1369401-1370000 996L

949001-952000 925 1070001-1071000 992L 1170001-1174000 95ap 1281001-800 974P 1370001-13 71000 974L

952001-958000 92. 1071001-1073000 975P 1174001-1176000 074P 1281801-1282000 956P 1371001-600 996L

958001-960000 92. 1073001-1075000 992 1176001-1177000 992L 1282001-1284000 996L 1371601-1373000 992L

960001-968000 9.0 1075001-1076200 974L 1177OO1-U78OOO 956P 1284001-1285000 992L 1373001-1374000 975P

968001-970000 92. 1076201-700 072L 1178001-1179000 974P 1285001-1286000 056P 1374001-1375000 092L

970001-971700 92' 1076701-1077000 978L 1179001-1181000 996L 1286001-1288000 978L 1375001-1376000 950L

971701-972000 9., 1077001-1070000 {)74P 1181001-1182000 992L 128800 1-500 903L 1376001-1377000 992L

972001-973000 924 1079001-1080000 992L 1182001-1183000 996L 1288501-1289100 992L 1377001-1378300 974P

973001-974000 936 1080001-100 952L 1183001-11 84400 974P 1289101-700 990L 1378301-1379000 956P

974001-9754.00 924 1080101-200 960L 1184401-1185400 9 56P 1289701-1290000 992L 1370001-1380200 972L

975401-25 Spec. 926 1080201-400 994L 1185401-1186000 974P 1290001-1291500 974P 1380201-138 1000 978L

975426-976000 92. 1080401-1081000 950L 1186001-1187000 992L 1291501-1292000 992P 1381001-500 956P

976001·979000 9'0 108 1001-1082000 978L 1187001-1188000 996L 1292001-1297000 992L 1381501-1383000 974P

979001-100 9.2 1082001-400 993L 1188001-1189000 992L 1297001-1298000 974P 1383001-1384000 992L

979101-981000 9'0 1082401-1083000 973L 1189001-1190000 974P 129800 1-1299000 992L 1384001-1386100 974P

98 1001-982000 9 • • 1083001-1084000 990L 1190001-1192000 996J .. 1299001-1300000 975P 1386101-1387000 956P

982001-984000 92. 1084001-1085000 992L 1192001·1193000 975P 130000 1-130 1000 974P 1387001-1388000 992L

984001-986000 9.0 1085001-1086000 992L 1193001-1194000 974P 1301001-1302000 974L 1388001-400 978L

9 86001-987000 9.6 1086oo1-1088()()(\ 974P 1194001 -11 95000 956P 1302001-500 992L 1388401-1389000 978L

9 87001-988000 936 1088001-1091000 992L 1195001-1196000 974P 1302501-1303000 990L 1389001-300 956P

9 88001-992000 9.0 1091001-200 978L 1196001-1199000 992L 1303001-600 972L 1389301-1390000 956P

992001-996000 92. 1091201-1092000 974L 1199001·1201000 974P 1303501-1304000 972P 1390001-1391000 992L

996001-999998 940 1092001-1093000 992L 1201001-1 202000 975P 1304001-1305000 978L 1391001-500 956P

999999-1000000 9.7 1093001-1095000 974P 1202001-1203000 992L 1305001-1306000 956P 1391501-1392000 974P

1000001-1000300 972 1095001-1096000 992P 1203001-1 204000 974P 1306001-1307000 974P 1392001-1393000 992L

1000301-1003000 992 1096001-400 974L 1204001-500 956P 1307001-1308600 992L 1393001-1394000 9 74P

1003001-1004000 97. 1096401-1097000 974P 1204501-1206000 974P 1308501-1309000 993L 1394001-1396000 992L

1004001-900 992 1097001-1098000 992L 1206001-1207000 992L 1309001-1310000 974L 1396001-500 972L

1004901-1007100 974 1098001-400 975P 1207001-1210000 974P 1310001-1311000 972L 1396501-1398000 974L

1007101-1008300 992 1098401-1099000 975L 1210001-1212000 992L 1311001-1312000 992L 1398001-400 974P

1008301-1009500 97. 1099001-600 993L 1212001-1213000 974P 1312001-800 974P 1398401-1399000 956P

1009501-1010700 992 1099601- 1100000 975P 1213001-500 9g6L 1312801-1313000 9S6P 1399001-1400000 992L

1010701 -1011200 972 1100001-1104000 992L 1213501-1214000 992L 13 13001-1317000 992L 1400001-1401000 93.

101 .1201·1012700 97. 1104001-1105000 974P 1214001-1214600 993 L 1317001-1318000 9.56P 1401001-1403000 92.

1012701 -1013000 992 1105001- 1106000 gg2L 1214601-1215000 975P 1318001-1321000 992L 1403001-1409000 940

101 ~001-lOI5000 97' 1106001-500 978L 1215001-1216000 974L 1321001-300 990L 1409001-500 9"

1015001·300 97. 1106501-1107000 972L 1216001-1219000 992 1. 1321301-1322000 992L 1409501-14 10000 940

1015301 - 1016000 992 1107001-110g000 992L 1219001-1220000 974P 132200 1-700 974L 1410001-1414000 924

1016001-300 975 1109001-1111000 9721 .. 1220001-1221000 992L 1322701-1323000 972L 1414001-300 941

10 1630 1-600 973 1IIlOOl·1112000 974L 1221001-1223500 974P 1323001-1324000 992L 1414501-1415000 925

1016601- 1018000 993 1112001-1113000 974P 1223501-1224000 956P 1324001-1325000 996L 1415001-1417000 924

1018001·1020000 992 1113001-1116000 992L 1224001-1227000 992L 1325001-1326500 975P 1417001-1419000 9.0

1020001-1022600 950 1116001-900 974P 1227001-1228000 972L 1326501-1327000 903L 1419001-1420000 924

1022601-1023000 952 1116901-1117000 974L 1228001-700 992L 1327001-300 956P 1420001-1421000 940

1023001 -700 992 111 7001-1119000 992L 1228701-1229000 990L 1327301-1329000 974P 1421001-1422000 92.

1023 701-1024 500 97' 1119001-1120000 978L 1229001-500 956P 1329001-1330000 992L 1422001-1424000 940

1024501-600 97. 1120001-1122000 992L 1229501-1230000 974P 1330001-1331300 974L 1424001-1428000 92'

1024601-1025000 972 1122001-1123000 974P 1230001-1 23 1000 974L 1331301-800 972L 1428001-1430000 9'0

1025001-1027000 975 1123001-500 972P 1231001-1232000 992L 1331801-1332000 978L 1430001-200 92.

1027001-400 993 1123501-1125000 974P 1232001-1233000 974P 1332001-1334000 992L 1430201-400 94'

1027401-1029600 975 1125001-1127000 992L 1233001-1236000 992L 1334001-400 9UP 1430401-1431000 924

1029601-1030000 973 1127001-1128000 972L 1236001-500 974P 1334401-1335000 956P 1431001-1433000 940

1030001-1032000 992 1128001-1129000 974L 1236501-1237000 956 P 1335001-300 978L 1433001-1438000 924

1032001-1033000 974 1129001-1130500 9HP 1237001-500 996L 1335301-1336000 972L 1438001-500 926

1033001-200 972 1130501-1131000 956P 1237501-1238000 992L 1336001-1337000 992L 1438501-1439500 924

1033201-800 95. 1131001-1132000 992L 1238001-1239000 956P 1337001-1338200 996L 1439501-1440000 92.

1033801-1035300 97' 1132001-1133000 990L 1239001-1241000 992L 1338201-1339000 996L 1440001-1441000 940

1035301-600 972 1133001-1134000 978L 1241001-1242000 975P 1339001-1340000 956P 1441001-1442000 924

1035601-1036000 974 1134001-1135000 972L 1242001-400 974L 1340001-1341000 992L 1442001-500 92.

1036001-300 972 1135001-1137000 992L 1242401-1243000 972L 1341001-300 972L 1442501-1444000 924

1036301-800 95. 1137001-1138000 956P 124300 1-500 996L 1341301-500 974L 1444001-1445000 940

1036801-1037000 992L 1138001-1139000 956P 1243501-1244000 992L 1341501-1342000 978L 1445001-1447000 92.

1037001-1038000 914 1139001-1140000 978L 1244001-1245000 974P 1342001-1343000 992L 1447001-1448200 9'0

1038001-1039000 992 1140001-1141000 972L 1245001-1246000 992L 1343001-400 956P 1440001-1450500 92.

1039001-200 972 1141001-1142000 g56P 124600 1-300 974P 1343401 - 1344000 974P 1500001-600 974P

1039201-500 97. 1142001-500 974P 1246301-800 9 S6P 1344001-1345000 992L 1500601-1501200 956P

1039501-1040300 97. 1142501-1145000 974L 1246801-1247000 974L 1345001-600 974L 1501201-1502000 974P

1040301-1041000 992 1145001·1146000 975P 1247001-1248000 9!)2L 1345601-1346000 972L 1502001-1503000 993L

1041001-1042000 974 1146001-500 956P 1248001-1249700 974P 1346001-1348000 975P 1503001-1504000 996L

1042001-700 992 1146501-1149000 974P 1249701-1250000 9!)6P 1348001-1349000 974P 1504001-500 974L

1042701-1043000 972 1149001-1150000 974L 1250001-1252000 983 1349001- 1350000 992L 1504501-1505200 972L

1043001-700 97' 1150001-600 950L 1252001-1253000 985 1350001-600 972r~ 1505201-700 978L

1043701-1044000 992 1150601-1151800 952L 1253001-1257000 983 1350601- 1351000 974L 1505701-1506000 974L

1044001-1045000 974 115 1801-1152000 952P 1257001 ·900 9'5 13 5100 1-1352000 993L 1506001-1507000 975P

1045001·1046000 992 1152001-900 950P 1260001-970 Cbro.* 1352001-1352300 974L 1507001-1508000 992L

1046001-1047000 975 1152901-1153200 952P 1260971-1265000 1352301 -800 978L 1508001-400 974P

1047001-1048000 974L 1153201-300 126500 1-1266000 956P 1352801-1353000 974L 1508401-1509000 956P

1048001-1049000 992 1153301-500 994P 1266001-1267000 974P 1353001 -500 972P 1509001-1510000 992L

1049001-500 990 1153501-800 994L 1267001-1268200 978 L 1353501-1354200 956P 1510001-151 1000 974L

1049501-1051000 992 1153801-1154000 960L 1268201-1269000 978 L 1354201-700 992P 151l001-1512000 975P

1051001-200 975 1154001-500 950L 1269001-600 992L 1354701-1355000 974P 1512001-1513200 992L

1051201-1052000 993 1154501-1155000 950P 1269601-1270000 992L 1355001-1356000 992L 1513201-600 992P

*HamJlton 36 size chronometer watch

12

... ...

~

DIAL SIDE

°0

JEWEL. b.lon" lower

PlKIS!. bonking

JEWEL, third and fourth lower

EHDSTOHf CAP. b.I'nce lower

TYPICAL PARTS OF A HAMILTON MOVEMENT

JEWEl, center lower

SPRIHG. clutch lever

lEVfR. "tting

lEVER. clutch

~

'co;

WHEEl lSI. "tting

Shown here in what are known as "exploded" views are all the parts of a typical Hamilton watch movement. The illustrations are based on a Hamilton 16 size watch. Except for obvious variations in size, shape, and certain parts peculiar to given models, the illustrations show typical Hamilton parts in a manner which suggest their assembly relationship. The illustrations will be of special interest to apprentices, junior watchmakers, and others who have recently joined the trade. Not only are typical parts shown in thirddimension and in their relative positions to one another, but they are identified by part names employed throughout this catalog.

WHEEL, minute, complete with pinion

SPRIHG. "tting cap

PINION, cannon

WHEEl. hour

JEWEl lSI. escape ond p.llet lower ~ EHDSTOHf CAP. escape and p,llet lower ~ ~

crre

~ o ~ ~ ~

< .... ~

~ 00

o ~

> ~ ::s ~

.... '"

ARBOR, barrel

TRAIN SIDE WHEEl, lower windinQ

BRIDGE, barrel

MAINSPRING

BARREL

,~" SCREW, selling lever Ibluel (§g'-)

~- .. ' ~ri"

WHEEL, third and prnlon ':::;:~ / l VJ ""'. ,.,,, .• ". ~ L JEWEL, cenler upper I "i1 ~ JEWEL, Ihird upper (~~ r STAff, b.lance

l ROLLER, large, and iewel pin r ROLLER, sm.1I WHEEL, winding

COCK, b.lance

JEWEL, balance upper

SPRING, regul.lor

SCREW, regulating, micrometric ~

REGULATOR l CAP, b.lance upper endslone -, I A '"

00",,, ... ,,," l~tf'

SPRING, h.ir ~ a..

~

~

~ h'f.l

WHEEl, b.lance

, /"

./~/~1 ./ III • ./ fiP III ~ ARBOR, p.llel

~ PALlET AND fOR! WITH SI

., 'I L BRIDGE. " lIe l /

JEWEL, p.llel upper "

ENDSTONE CAP, p.llel upper ~ l ' o /" WHEEL, escape

~ '-;;: PINION, .scap.

~ ., tiL JEWEl, fourlh upper

JEWEl, esc.p. upper

EHDSTONE CAP, esc.pe upper

~ [is ~ o ~

~ is: o ;i is: t'j

~

16

INTRODUCTION TO MATERIALS LISTS

HAMILTON WATCHES EASILY REPAIRED WITH GENUINE MATERIALS

Genuine Hamilton materials are identical with those used in the original model of any given size or grade of Hamilton watch. Repair of Hamilton watches with genuine material, therefore, is a relatively simple, foolproof operation and makes it possible for the watchmaker to restore any Hamilton to the fine mechanical condition it was in when it left the factory. Genuine Hamilton materials are packaged at the factory and each envelope or container is plainly marked with essential identifying data.

All hole jewels cataloged in the following materials lists, unless they are marked unset, are jewels in settings.

To order Hamilton material secure the movement grade number which is engraved on one of the bridges of virtually all Hamilton movements, then consult the index on page 3. Hamilton movements which do not have grade numbers engraved on them do carry serial numbers which can be checked against the serial numbers listed on pages 9 to 13 to secure the grade number. All materials are classified by watch size and grade on pages indicated in the index. When the material desired has been located under the appropriate grade, the order can be prepared. Always use catalog number and part name on material orders. All orders for Hamilton material should be sent to Hamilton material jobbers. If Hamilton material jobbers in your area are not known, write the Material Sales Department of this Company for a list of such jobbers.

ALWAYS USE GENUINE HAMILTON MATERIAL

ti C

o Q

C

C

t Q

Q

C Q , Q

C C

C C C C C Q

c: C c c

924 925 926

GRADES

927 928 929

930 931 932

Specild Note:

933 934 935

Grade 924: Two Piece Pallet and Fork be/ore No. 655801 Solid Pallet and Fork after NQ. 655800

Grade 926: Two Piece Pallet and Fork before No. 673001 &/id Pallet and Fork aJter No. 673000

Grade 927: Two Piece Pallet and Fork before No. 658501

Cat. 1V0.

22 129 255 242A 104 ,.

17 71 32 34 7. 29 64A

158 159 167 169 134 135 147 149 142 143 137 138 480 477 478

68 15

69 92A 91 93A

375B 97

253 120 125 26 62 63

392 394 482 482B 193 207 208 179 205 185 192 200 190 194

SQlid Pallet and Fork after No. 658500

iUaterial

Arbor, barrel Arbor, pallet, 2 pIece pallet and fork Arbor, pallet, solid pallet and fork Balance complete Band, dust, O.F. Darrel Darrel and Arbor Cap, hairspring stud Click, after movt. No. 100000 Click, be/ore mocl. No, 100001 Collet, hairspring Hub, winding wheel Index Jewel, balance upper Jewel, balance lower Eudstone, balance upper EndetoDe, balance lower Jewel, center upper Jewel, center lower Jewel, escape or pallet, upper Jewel, escape or pallet, lower Jewel, fourth upper Jewel, fourth lower Jewel, third upper Jewel, third lower Jewel, roller Stone, pallet, receiving Stone, pallet, discharging

(When ordering, please state whether pallet stone is for solid or f! piece pallet and fork.)

Lever, regulator Mainspring, St,r. 20M, refill No. 202 or Str.21M Nut, regulator Pallet, 2 piece Fork, 2 piece Pallet and Fork, 2 piece Pallet and Fork, solid Pallet, Fork and Arbor, 2 piece Pallet. Fork and Arbo .. , solid Pinion, cannon Pinion, escape Pinion, winding Regulator, O.F. Regulator, Htg. RoUer Roller and Jewel Pin Screw, balance Screw, meantime Se .. ew. banking Screw, winding bridge Screw, hairspring stud cap Screw, case Screw, cl1ck Screw, balance cock Screw, dial foot Screw, winding wheel hub Screw, index Sc .. ew, jewel, balance upper, balance lower, and lower plate

18 SIZE MOVEMENTS

Cat. No. Material

211 Sc .. ew, regulator lever 182 Screw, pillar 201 Screw, shipper 206 Screw, click spring 203 Screw, regulator spring 202 Screw, shipper spring 210 Screw, yoke spring

67 Screw, regulator 30 Shipper 50 Spring, click after movt. No. 100000 51 Spring, click, before movt. No. 100001 75 Spring, hair 65 Spring, regulator 49 Spring, shipper 48 Spring, yoke

127 Staff, balance, S.R. 607 Stud, hairspring

79 Wheel, center, stafl' and pinion 82 Wheel, third and pinion 84 Wheel, fourth and pinion 89 Wheel, escape and pinion 44 Wheel, hour 45 Wheel, minute 35A Wheel, ratchet 42 Wheel, setting 38 Wheel, winding 40 Wheel, lnterwinding 27 Yoke

936 937

GRADES

938 939

Special Note:

948

Grade 936 fitted wit": regular barrel before No. 987001 motor barrel after No. 987000 :lingle roller before No. 426001 double roller after No. 426000

Grade 937 fitted with:

Cat. No.

22 236 129 255 242A 242B I. 17

233 234 235

70 71 32 34 76

237 29 64A

158 159A 159 166 169 168 133 135 146 149 141

regular barrel before No. 652901 motor barrel after No. 652900 :lingle roller before No. 652901 double roller after No. 652900

hlaterial

Arbor, barrel Arbor, motor barrel Arbor, pallet , 2 piece pallet and fork Arbor, pallet, solid pallet and fork Balance, complete, S.R. Balance, complete, D.R. Ba .. rel Barrel and Arbor Barrel, motor Barrel, motor with arbor and nut fitted Barrel. motor, complete with arbor, hub, nut and ratchet wheel fitted Cap, regulator Cap, hairspring stud Click. after movt. No. 1QOOOQ Click, before movt. No. 100001 Collet, hairspring Hub, motor barrel Hub. winding wheel ludell Jewel, balance upper Jewel. balance lower, D.R. Jewel, balance lower, S.R. Endstone. balance upper Endstone, balance lower, S.R. Endstone, balance lower, D.R. Jewel, center upper Jewel, center lower J ewe., escape upper Jewel, escape lower Jewel, fo urth upper

Cat. 1V0.

143 146 149 136 138 479 475 476

68 15

232 25 6. 92A 90 91 93 93A

375 95 97

252 120 125 26 62 63

391 3 •• 395 392 394 481 482A ,.3 207 209 179 205 186 192 200 191 194 197 195 212 182

67 201 206 204 202 210 30 50 51 75 65 49 48

126 127 607

79 82 84 88 44 45

239 35A 42 38 40 27

Material

Jewel, fourth lower Jewel, pallet upper Jewel, pallet lower Jewel, third upper Jewel, third lower Jewel, roller Stone, pallet, receiving Stone, pallet, discharging

(When ordering, please slate whether pallet stone is jor solid or 2 piece pallet and fork.)

Lever, regulator Mainspring. Str. 20,%, refill No. 202 or Str. 21M Mainspring, Str. 18, M.B., refill No. 204 Nut, M.B. arbor Nnt. regulator Pallet, 2 piece Fork, 2 piece, D.R. Fork, 2 piece, S.R. l'allet and Fork, 2 piece, D.R. Panet and Fork, 2 piece. S.R. Pallet and Fork, solid Pallet. Fork and Arbo .. , 2 piece, D.R. Pallet, Fork and Arbor, 2 piece. S.R. Pallet, Fork and Arbor, solid Pinion, cannon Pinion, escape Pinion, winding Regulator,O.F. Regulator, iltg. Roller, small Roller, large Roller, large and jewel pin Roller, single Roller, single and jewel pin Screw, balance Screw, meantime Screw, banking Screw, winding bridge Screw, hairspring stud cap Screw, case Sc .. ew, click Screw, balance cock Screw, dial foot Screw, winding wheel hub Screw, index Screw, jewel, balance upper or lower,S.R. Screw, jewel, balance lower, D.R. Screw, jewel, plate Screw. regulator lever Screw, pillar Screw, regulator Screw, shipper Screw, click spring Screw, regulator spring Screw, shipper spring Screw, yoke spring Shipper Spring, click, after movt. No. 100000 Spring, click, before movt. No. 100001 Spring, hair Spring, regulator Spring, shipper Spring, yoke Staff, balance, D.R. Staff, balance, S.R. Stud, hairspring Wheel, center, staff and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, motor ratchet Wheel , ratchet Wheel, setting Wheel, winding Wheel. interwinding Yoke

17

GRADES

940 941 942 943

Special Note:


regular barrel before No. 594501 motor barrel after No. 594500 single ro lle r before No. 512201 double roller after No. 512200 TICo Piece Pallet and Fork before No. 653001 Solid Pallet and Fork after No. 653000

Grade 941jitted with:

reGular barrel be/ore No. 623001 motor barrel afte r No. 623000 aingle roller before No. 419101 double Toller after No. 419100

Grade. 942 and 943:

Cat. No.

22 236 128 254 242A 242B

16 17

233 234 235

7l 32 34 76

237 29 64A

158 159A 159 166 169 168 133 135 148 149A 160 162 141 143 136 138 479 475 476

68 15

232 25 69 92A 90 91 93 93A

375 94 96

251 120 124 26 62 63

391 396 395 392 394 481 482A 193

18

11I0tor barrel on all movement.

JJfaterial

Arbor, barrel Arbor, motor barrel Arbol', pallet, 2 pIece, pallet and fork Arbor, pallet, soUd. pallet and fork Balance, complete, S.R. Balance, complete, D.R. Barrel Barrel and Arbor Barrel, motor Darrel, motor, with arbor and nut fitted Banel, motor, complete with arbor, hub, nut and ratchet fitted Cap, hairspring stud Click , used after motlt. No. 100000 Click, used before mopt. No. 100001 Collet, hairspring Hub, motor barrel Hub, winding wheel Indes Jewel, balance upper J ewel, balance lower. D .R. Jewel, balance lower, S.R. EDd.tone, balance upper End"tone, balance lower. S.R. End.tone, balance lower, D.R. Jewel, center upper Jewel, center lower Jewel, escape or pallet upper Jewel. escape or pallet lower End.tone, escape or pallet upper End.tone, escape or pallet lower Jewel, fourth upper J ewel, fourth lower Jewel, third upper J ewel, third lower Jewel, roller Stone, pallet, receiving Stone, pallet, discharging Level', regulator Main.pring, Str. 20, refill No. 203 MaiD.pring, Str. 18. M.B., refill No. 204 Nut, motor barrel arbor Nut, regulator Pallet, 2 piece Fork, 2 piece, D.R. Fork, 2 piece, S.R. Pallet and Fork, 2 piece, D.R. Pallet and Fork, 2 piece, S.R. Pa.llet and Fork, solid Pallet, Fork and Arhor, 2 piece, D.R. Pallet, Fork and Al'bor, 2 piece, S.R. Pallet, Fork and Arbor, solid Pinio n , cannon Pinion, escape Pinion, winding Regulator,O.F. Regulator, Htg. Roller, small Roller, large Roller, large. and jewel pin Roller, single Roller, single. and jewel pIn Screw, balance Screw, meantime Screw, banking

18 SIZE MOVEMENTS

Co,. No.

207 209 179 205 186 192 200 191 194 197 195 212 182 67

201 206 204 202 210

30 50 51 75 65 49 48

126 127 607

79 82 84 87 44 45

239 35A 42 38 40 27

Material

Serew. winding bridge Screw, hairspring stud cap Screw, case Serew, click Screw, balance cock Screw, dJal foot Screw, winding wheel bub Scr ew , index Screw, jewel, balance upper or lower. S.R. Sc rew, jewel. balance lower. D.R. Screw, jewel. plate Screw, regulator lever Screw, pillar Screw, regulator Scr ew, shipper Screw, click spring Screw, regulator spring Screw, sbJpper spring Screw. yoke spring Shipper S pring, cUck used after mOllt. No. 100000 Spring, click used before m()f)/. No. 100001 Spring, hair Sprin&, regulator SpriDg, shipper S pring, yoke Staff, balance. D.&. Staff, balance, S.R. Stud, haIrspring Wheel, center. staff and pl.n1on Wheel, tb.i.rd and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, motor ratchet Wbeel, ratchet Wheel, setting Wheel, winding Wheel, interwinding Yoke

GRADES

944 946

Special Note:

Grade 944 fitted with: old .tyle moto,. barrel be/or., No. 479001 neU! .tyle Inoto,. borrel after No. 479000

Grode 946 fitted with:

Co,. No.

23 236 129

128

255

254

242B 18 19 20

21

233 234

235

7l 32 76 24

237 29 64 MA

158

old .tyle motor barrel before No. 4598{11 neU! .tyle motor barrel ofter No. 459800

Material

Arbor, motor barrel. old slt/le Arbor, motor barrel, new stVIe Arbor, pallet, 2 piece pallet and fork. Grade 944 A!'bor. pa.llet, 2 pIece pallet and fork, Grade 946 Arbor, pallet, solid pallet and fork. Grade 944 Arbor, pallet, solid pallet and rork, Grade 946 Balance, complete Barrel, motor, old stvle Di.c, motor Barrel, motor, old slVIe. with arbor and nut fitted Barrel, motor, old SIt/Ie, complete with arbor, hub, nut and ratchet wheel fitted Barrel, motor, new stIlle Barrel, mawr, new sIt/Ie, with arbor and nut fitted Darrel, motor, new stIlle, complete with arbor. hub, nut and ratchet fitted Cap, hairspring stud Click Collet., hairspring Hub, motor barrel. old sit/Ie Hub, motor barrel, new slUil Hub, winding wheel IDdex, Grade 946 IDdex, Grade 944 Jewel, balance npper

Co,. No.

159 159A 166R 166 168 130 132 13S 135 146 148 149 149A 160

162

,., ,.3 136 138 479 475 476

68 14

232 25 69 92 90 93

375 94

95

251 252 120 124 125 2. 60

391 396 395 481 482A 193 21. 207 209 179 205 186 192 213 200 191 194 197 195 182 67

201 206 204 202 210

30A 50 75 65 49 48

126 607

79 82 8' 87 88 44 45 3 7

239A 42 38 39 40 27 27A

Material

Jewel, balance lower, S.R. Jewel, balance lower, D.R. End.tone. balance upper. Grade 948 Eudstone, balance upper. Grade 944 End.tone, balance lower Jewel, barrel upper lewel, barrel lower Jewel, center upper lewel, center lower Jewel, escape. or pallet upper, Grade 944 Jewel, escape. or pallet upper, Grade 946 Jewel, escape, or pallet lower, Grade 944 Jewel, escape. or pallet lower, Grade 946 Endstone, escape, or pallet upper, Grade 946 Eudstone, escape. or pallet lower, Grade 946 lewel, fourth upper Jewel, fourth lower Jewel, third u pper lewel, third lower Jewel, roller Stone, pallet. receiving Stone, pallet, discharging Leyer, regulator Mainspring, motor barrel, old stille Main8PJ'ing. motor barrel, new stt/le Nut., motor barrel arbor Nut, regulator Pallet., 2 piece Fork, 2 piece Pallet. and Fork, 2 piece Pallet. and Fork, solid Pallet. Fork and Arbor, 2 piece, Grade 9« Pallet., Fork and A!'bol', 2 piece, Grade 94+ Pallet, Fork and Arbor , solid, Grade 946 Pallet. Fork and Arbor, solid, Grade 944 Pinion, cannon Piuion, esca.pe, Grade 946 Pinion. escape, Grade 944 Pinion, winding Regulator Holler, small Roller, large Roller, large and jewel pin Screw, balance Screw. meantime Screw, banking Screw. motor ratchet brIdge Screw, winding bridge Screw, hairspring stud cap Screw, case Screw, click Screw, balance cock Screw, dial foot Screw. motor barrel hub Screw, winding wheel hub Screw. index Screw, balance upper jewel Screw, balance or barrel lower jewel Screw, plate or barrel upper jewel Screw, pillar Screw, regulator Screw, shipper Screw, click spring Screw, regulator spring Screw, shipper spring Screw, yoke spring Shipper Sprins. click SpriDg, hair SpriDg, regulator Spring, shipper Spring, yoke St.alT, balance, D.R. Stud, hairspring Wheel, center staff and pinion Wheel, third and pinion Wheel, fourth and plnion Wheel escape and pinion. Grade 946 Wheel, escape and pl.n1on, Grade 944 Wheel, hour Wheel, D.l1nute Wheel, motor ratchet, Grade 944 Wheel, motor ra.tchet, Grade 946 WI",.:el . setting Whcel. winding, Grade 944 Wheel, winding. Grade 946 Wheel, lnterwinding Yoke, Grade 944 Yoke, GradtJ 9.¥6

Co,. No.

542

563

432 432F

433A 433F

320

321 322

602 535 535A 636

536A

328 557 558 n

330 330A 325A

76 543

660

661 315 559 465 466 472R 472

474 552 565J 564 447 449 458 459 461 461A 467R 469 454 455 457 462 463 464 464A 470 470A

469 450 451 453 479 475 476

414 414A 4l3A 415 534

54. 662 376 376

GRADES

950 952 996 Ma~riol

Arbor, motor barrel, Grades 960 and B6t before No. 846601 Arbol', motor barrel. Grades 960. 9514 and Grade 996 a/ler No. 848600 Arbor, pallet, Grade 960 Arbor, pallet. friction, Grade 950 after No. 1577000 Arbor, pallet. Grades 962 and 996 Arbor, pallet. friction, Grade 962 after No. 1163$00 and Grade 996 after No. 1389000 Arbor, winding, P.B •• Grades 950 and 952 before No. 1674401 Arbor, winding. Jever set Arbor, winding, P.B., Grades 960 and 962 after No. 1674400 Balance, complete Barrel, motor, Grades 960 and 95S Darrel, motor, Grade 996 BRrrel, mooor with arbor and nut fittOO, Grades 960 and 96S Barrel, motor with arbor and nut fitted. Grade 998 Drida:e, setting wheel Cap, motor ratchet, Grades 960 and Doi Cap, motor ralebet, Grade 996 Cap, halrspring st.ud Cliek~ before No. 776001 C lick, after No. 776000 Clutch Collet~ hairspring Hub. M.B.. Grades 960 and 951 before No. 8,,8601 Hub, M .D., Grades 960 and 951 after No. 846600 Hub, motor barrel, Grade 996 Hub, winding wheel, two holes Hub, winding wheel, one hole Jewel, balance upper Jewel~ balance lower End.tone~ balance upper. Grade 950 End. tone, balance upper. Grades 96t and 99. End.tone~ balance lower Jewel, barrel upper, Grades 9.50 and 96! Jewel~ barrel upper. Grade 998 Jewel, barrel lower Jewel, center upper Jewel, center lower Jewel, escape upper. Grades 96! and 998 Jewel, escape upper, Grade 960 Jewel, escape lower. Grades 96! and 996 Jewel, escape lower, Grade 960 End. tone, oscape upper. Grade 960 End. tone, oscape lower. Grade 960 Jewel, fourth upper. Grade 960 Jewel, fourth upper, Grades 96t and 996 Jewel, fourth lower Jewel, pallet upper, Grade 960 Jewel~ pallet upper, Grades 951 and 996 Jewel, pallet lower, Grade 960 Jewel, pallet lower, Grades 96t and 996 End.tone Cap, pallet upper, Grade 960 EndlJlone Cap, pallet upper, after No. 1676001 End.tone, pallet lower, Grade 960 Jewel, third upper, Grade 960 Jewel, tb.J.rd upper, Grades 96! and 998 Jewel, third lower Jewel, roller StonCl, pallet, receiving Stone, pallet, discharging

(When ordering, please atate whether palle' atone', for solid or ! piece pallef and fork. )

LCI·'t'eI'~ clutch, Grades 96! and 998 Le .. er~ clutch. Grade 960 Leyer~ setting Level', shop MHin.pring, Str. 16~, motor barrel, refill No. 210 Nut, M.B. arbor Nut, M.B. hub, Grade 996 Pallet and Fork Pallet. Fork and Arbor, Grade 960

16 SIZE MOVEMENTS

Co,. No.

376A

323 425 429 '30 326 a8lA 391 396 395 481 482A 495 488 511

1361

209 485 493 491 192 494A 512 512A 498 197 507 518 523 523A 516 506 508 204 524 508 529 401 565 331 417 418 421 386 383A

3830 420 420A 416 434 319 607 342

344 356 363 366 368

332 333 538 556 537

329 3130 564 564A

Co,. No.

60lA 601 602 350 604A 606 603 607 363 356

ltlQterlcil

PaUet, Fork and Arbor, Grades 96! and 996 Pin, push Pinion, cannon Pinion, escape. Grade 960 Pinion, escape. Grades 96S and 998 Pinion, winding ReICulator Uoller, small Roller, large Uoller, large and jewel pin Screw, balance Screw. meantime Screw, banking Serew, bridge Screw, pallet bridge Serew, setting wheel bridge or M.n. ratchet cap Serew, hairspring stud cap Screw, case Serew, cUck Screw. balance cock Screw, dial, for 4 footed dial ScrClw, dial. for 3 footed dial Screw. winding wheel hub, two holes Senw, winding wbeel hub. ODe hole ScrClw ~ jewel. balance or plate upper ScrClw, jewel. balance or pallet lower Screw. clutch and setting lever Serew, regulator, mlcrometric Screw, shipper. befort NQ. 858001 Serew, shipper, after No. 868000 Screw, clIck spring Screw. clutch spring, lever set Serew, clutch spring. P.S. Serew. regulator spring Serew, shipper spring. lever set Screw, setting lever spring, P.S. Screw, yoke, lever set Shipper, before No. 868001 Shipper, after No. 868000 Spring, cllck Spring, clutch. lever set Spring. clutch, P.S. Sprins, clutcl11ever Spring, hair Spl'iDg. regulator and screw, Grades 960 and 96! Spring. regulator and screw, Grade 996 SpriDlJ, setting lever, Grades 96$ and 996 Spring, setting lever, Grade 960 Spring, shIpper. lever set Slaff, balance. D.R. StClln, case Stud , hairsprlng Wheel. center, staff and pWon. Grades , 960 and 996 Wheel. center, staff and pWon, Grade 96£ Wheel, tbJrd and pinion Wheel, fourth and pinion Wheel, escape and pinion, Grade 960 Wheel, escape and pinlon, Grades 96£ and 996 WheClI, hour Wheel, mlnute Wheel, ratchet, motor, Grades 960 and 9612 Wheel, ratchet, motor, Grade 996 W heel. ratchet, motor, Grades 960 and 961 Wheel. setting Wheel , winding Yoke. lever set, Grade, 96t and 996 Yoke, lever set, Grade 950

GRADE 950E

~loteri41

Balance (with screws) and Hub Balan ce (wit.h screws) and Staff Balance, complete Collet, hairspring Huh, balance Spring, hair Staff, balance Stud, hairspring Wheel, fourth and pinion Wheel, third and pinion

Co,. No.

638 3130

Co,. No.

683 610 680 611 60lA 612 613 682 616 617 618 387A 619 620 621 622

623 696 604A 624 692

6070 62S 626 627

628 630 631 632 479 678 679 534B

35434 633 634 635 636 637 640 641 642 643 64. 481 645 482A 495 685 646 686

5097 649 650

6093

1366 651 518 652

6096 1798 687 688 655 666 675 657 658 659 677 662 665 672 689 668

6042 691 670 673 695

M.urlol

Wheel, ratchet Wheel, winding

All other procurable part, ,arne as Grade 950

GRADE 950B ~IQteri(ll

Arbor, barrel Arbor, pallet Arbor, ratchet wheel Arbor, winding Ball.ln eCi (with screws) and Hub Balance (with screws) and Staff Balance, complete Barrel and Arbor Click Clip, wluding arbor Clutch Collet, hairspring End.toue CliP, balance upper Eud.lone C ap, balance lower End.tone Cap, escape upper End.touCi Cap, escape lower or pallet lower End.tone Cap, pallet upper Hook, mainspring Hub, balance wheel Jewel, balance upper or lower J ewel~ barrel upper Jewel, barrel lower Jewel, center upper Jewel, center lower Jewel, escape upper, or lower, or pallet lower Jewel, third or fourth upper or lower Jewel, pa.lIet upper J e wel, pallet stone, receiving Jewel, pallet stone, discharging Jewel, roller Le"er, clutch Le'f'el' , shipper Main.prillg, Str. 15 MM Mainspring, (standard) str.370. Dynavar Pallet and Fork Pallet, Fork and Arbor l·in, banking, before Na. 04049 Pinion , cannon Pinion, escape Pinion, winding Regulator Roller. large Roller, large and jewel pin Roller. small Serew ~ balance Screw ~ balance COCk Screw~ balance meantime Screw, banking Screw, bridge Screw~ paUet bridge Screw, case Screw, cUck Screw, dial foot Serew, ba.la.nce upper cap Screw, cap, bala.nce lower, escape lower, escape upper, or pallet lower Screw, pallet upper cap Screw, shipper lever Screw. micrometric regulator Screw, rogulator spring Serew, setting cap spring Screw, hairspring st.ud Screw, ratchet. wheel Screw, winding wheel Spring. cUck Spring, clutch lever Spring, hair. ElinfJar Extra Spring, regulator Spring, set.ting cap Staff, balance Stud, ha!rsprlng Wbeel, center and pinion Wheel, escape and pinion Wbeel, third and pinion Wbeel, fourth and pinion Wheel. hour Wheel , mlnute Wbeel, r atchet Wheel, setting Wheel, lower winding Wheel, winding

19

954 962

GRADES

963 966

967 972

SPUN" Note:

973

Grade 972fiued with: dngle roller be/ore No. 748001 double roller qfte,- No. 748000 two piece JXlllet and fork be/ore No. 724001 _olid pi"let andfork after No. 724000

Grade 91lfiued u;ith:

eo,. No.

32' 433 433A 433F

320 321 322 575 602 33' 335 328 316

71 330 330A 325A

76 315 559 .65 466 472 474 4.7 449 458 • 61 .55 457 '63 464A 451 453 479 .75 .76

414 5'6 404

405

• 11

412

413A

5.5 415 547 317 317 410

92A 90

371 375A 375 374 376A 425 '30 326 323 382 391 396 395 392

20

_ingle rolle,- befo,-e No. 11I301 doubt8 roller afte r No. 7113oo

lUoteriol

Arbor, barml Arbor, pallet, 2 piece pallet and fork Arbor, pallet, soUd pallet and fork Arbor, pallet, friction , solid pallet and fork. after No. 16801,01 Arbor, winding, P.B. Arbor, winding . lever set Arbor, winding, P.S., after No. 1674401 Balance, complete, B.R. Balance, complete. D.R. Barrel Darrel and Arbor Bridge, setting wheel Cap, ratchet Cap, hairspring stud Click, before No. 776001 Click, after No. 776000 Cluteh Collet, h&irspring Hub, winding wheel, 2 holes U~b. winding wheel, 1 hole Jewel, balance upper Jewel, balance lower End.tone, balance upper End.tone, balance lower Jewel, center upper Jewel, center lower Jew el, escape upper lewel, escape lower Jewel, fourth upper Jewel, fourth lower Jewel, pallet upper Jewe l, pallet lower lewel, third upper Jew e l, third lower Jewel, roller Stone, pallet, r eceiving Stone, pallet, discharging

(When ordering, please stale whether pallet stone is for solid or t piece pallet and fork.)

Leyer, clutch. O.F. Lel'er, clutch, Btg. Le't'er, .setting, O.j!'" P.B., Nos. 3~2911 10 719000 incl. Lel'er, setting, Htg., P.B., Nos. 3f2911 to 719000 incl. Lel'er, setting, complete, O.F" P.B., Nos. S£fBJ 1 to 719000 incl. Leur, settlng, complete, Htg., P.S., Nos. S£f91 1 to 719000 incl. Lel'er, sotting, O.F., P .S., after No. 719000 Lever, setting, Btg .• P.B. after No. 719000 Leyer, shop, O.F. Lever, shop, Htg. Mainllpring, Btr. 18 . ref!.ll 207 Main.pring, Str. 19, refill 206 Nut, release stud Pallet, 2 piece. D.R. Fork, 2 piece, D.R. Fork, 2 piece, B.R. p .. ll et, and Fork. 2 piece Pallet and Fork, solid, n.R. P"lIet, Fork and Arbor, 2 piece Pallet, Fork and Arbor, solid Pinion, cannon Pinion, escape Pinion, winding Pin, push Regulator Roller, small Roller, large Roller, large and jewel pill Roller, single

16 SIZE MOVEMENTS

Co,. No.

394 .81 482A 495 517 488 511

1361 209 485 493 491 192 494A 50. 512 512A 498 197 507 518 523 523A 516 506 508

204 524 508 200 52' 401 565 331 417 418 41. • 21 5.9 386 3830 420

548

422

' 23

410 '34 435 319 607 408 344 357 363 308 332 333 3HA 329 3130 564

Mcaterlcd

RoUer, single and jewel pin Scr ... w, balance Screw, meantime Scr ... w, banking Scr ... w, binding Screw, bridge Scr"'w, pallet bridge Screw, settlng wheel bridge Serew, hairspring stud cap Screw, case Screw, click Screw , balauce cock Screw, dial, 4 footed dial Screw, dial. 3 footed dIa.1 Scr ew, ratchet wheel hub Screw. winding wheel hub, 2 boles Screw, winding wheel bub. 1 holo Screw, jewel, balance upper or plate Screw. jewel, bala.nce lower, or pallet cap Screw, setting lever or clutch lever Screw, regulator micrometrlc Screw, shipper, befoTe No. 868001 Screw, shipper, afler No. 868000 Screw, click spring SClI!'ew, clutch spring. lever set Screw, clutch spring, or settiug lever spring, P.B. Screw, r egulator spring Screw, shipper spring, lever set Screw, setting levor spring, P.B. , 1s t series Screw, setting lever spring, P .S., 2nd series Screw, yoke, lever set Shipper, before No. 868001 Shipper, after No. 868000 Spring, click Spring, clutch. lever set Spring, clutch, O.F., P.B. Spring, clutch, Htg., P.B. Spring, clutch level', O.F., P.S . Spring, clutCh lever, Htg., P.S. Spring, bair SpriJig. r egulator and screw Spring, setting lever, O.E'., P.B .• after No. 719000 Spring, setting lever, Htg., P.B., after No. 719000 S.,ring, setting lever. O .F., P.S., before No. 719001 Spo:"ing, setting lever. Btg .• P.S., after No. :112910 Spring, sbJpper, lever set Staff. balance, D.R. Staff, balance, S.R. Ste=., case Stud, hairspring Stu d, release Wh ... el, center, stall and pinion Wheel, third and pinion Wheel, fourth and pinion Wh ... el, escape and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel, setting Wheel, winding Yoke, lever set

GRADES

956 964 965

968 969 974

975 976 977

Special Note:

978

Grades 956 964 965 968 969 975 976 lind 977 were fitted with: _ingle roller btifore No. 2417001 double roller after No. 2477000

Grades 974. arld 978 were fitted wit": _Ingle roller before No. 2490001 double roller after No. 2490000

32. 433 433A

433F

Arbor, barrel Arbor, pallet. 2 piece pallet and fork Arbor , pallet, solid pallet and fork, before No. /6:16101 Arbor, pallet, solid pallet and fork, after No. 16:J6tOO

eo,. No.

320 321 322 575 602 334 335 328 550 561 3 16

71 330 330A 325A

76 3 15 559 465 466 473 474 448 4·49 460 461 456 .57 463 464A 452 453 .79 475 476

41. 546 '04

405

'11

412

413A

645

415 547 3 18 8 18 '10 .2A

371 3750 375B 375 374 376B 376A 425 '30 326 323 382 391 396 395 392 394 '82 482B 495 617 487 5 11

1361 627 208 '8' 492 490 '.2 494A 503 511 511A

Material

Arbor. w:lndlog. F.S., before No. 187.401 Arbor, winding, lever set Arbor. winding, P.B., afler No. 1874400 Dalance, complete, S,R. Balance, complete, D.R. Borrel Barrel and Arbor B .. idge, setting wheel Bridge, setting wheel, Htg .• P.B. B .. idge. stem, Htg., P,S. COl), ra.tchet Cap. hairspring stud Click, be/ort No. 775001 Click, after No. 776000 Clutch Collet, hairspring H ub, winding wheel. two holes Hub, winding wheel, onc bole lewel, balance upper Jewel, balance lower Endlltonfl, balance upper Endlltone, balan ce lower Jflwel, center upper Jewel, center lower Jewel. escape upper Jewel, escape lower Jewel, fourth upper J ewel, fourth lower Jewel, pallet upper lewel, pallet lower lewel, tbird upper lewel, third lower Jewel, roller Stones, pallet. receiving Stone",. pallet, discbarging

(When ordertng, please state whe,her pallet stone i.! for soUd or ! piece pallet and fork.)

Leyel', clutch, P.B., O.F. Len,r, clutch, P.B .• Htg. Leyer, sotting, P.B., O.F., Nos. 3tf911 to 719000 incl. Le't'er, setting, P.S., Htg., Nos. :1~f911 10 719000 incl . Le't'er, setting, complete, P.B.. O.F., Nos. 8t~911 /0 719000 inel. Le.er, setting, complete, P.B., Htg., Nos. 8~1911 to 719000 incl. Lever, setting, P.B., O.F., after No. 719000 Leyel', setting, P.B., Hts.. afler No 719000 Leyer, shop, O.F. LenIr, shop, Htg. I\fain.pl'ing\ Str. 18. raDII 208 Main.pring, Btr. 19~, refill 205 Nut, release stud Pallet, 2 piece, S.R. Fork, 2 pIece. B.R. Pallet and Fork, 2 piece, S.R. P.lIet and FOl'k, solid, B.R. Pallet and Fork, solid, D.H. Pallet, Fork and Arbor, 2 piece, B.R, Palle t, Fork and Arbor, solid, S.R . Pallet, Fork and Arbor, solid, D.R. PinioD, cannon Pinion, escape Pinion, winding Pin, push Regulator Roller, small Roller, large Roller, large and jewel pin Roller, single RoUer, single and jewel pin Scr ... w. balance Screw, meantime Screw, banking Screw, binding Screw, bridge Screw, pallet bridge Screw, setting wheel bridge Screw, setting wheel brIdge, Htg Sc ..... w, hairspring stud Screw, case SCr"'w, click Screw, balance cock Screw, dial , for 4 footed dials Screw, diai, for 3 footed dials Screw, ratcbet wheel hub Sc .. ew, winding wheel hub, 2 holes Screw, winding wbeel hub, 1 hole

Ca •• No.

49. 197 507 618 523 523A 516 506 508

203 524 200

52' 401 565 331 417 418

41.

421

54.

386 3830 420

54.

422

423

416 434 435 31. 607 408 344 357 363 368 332 333 3UA 32. 31S0 564

MattJrlGr

Screw, jewel, balance upper or plate Screw, jewel, balance lower Screw, clutch lever or setting lever Screw, regulator, micrometrlc Screw, &hipper, before No. 868001 Screw, shipper, after NQ. 868000 Screw, click spring Scrt!!w. clutch spring, lever set Screw. clutch spring, or setting lever spring P.B. Screw, regulator spring Screw, shipper spring, lever set SCl'ew, setting lever spring, P.B., Nos. SU91! to 719000 incl. Screw, yoke. lever set Shipper, be/ore No. 858001 Shipper, afler N o. 868000 Spring. click Spring, clutch, lever aet Spring. clutch, O.F., P.B., Nos. SUO! ! to 719000 Spl'ing. clutch. Htg .. P.B .. Nos. 5t£911 to 119000 Spring. clutcb lever. O.F .. P.B., a/ler N o. 719000 Spring, clutch lever, Htg., P.S., after No. 7/8000 Spring, hair Spring, regulator and screw Spring. setting lever, P.B., O.F .• after No. 118000 SprlDg, setting lever. P.S., Btg., after No. 119000 Spring, setting lever, P.B .• O.F., all orades up to No. 718000 Spring, setting lever, P.S., Htg., a/1 orades up to No. 7 19000 Spring. shipper, lever set Staff. balance, D.R. StafT. balance. B.n. SteIn, case Stud. hairspring Stud, release Wbeel, center, staff and pinion Wbeel, third and pinion Wbeel, fourth and pinIon Wheel, escape and pinion Wbeel, hour Wbeel, minute Wheel, ratchet Wbeel, setting Wbeel, winding Yoke, lever set

960 961 970

GRADES

971 990 991

Special Note:

992 993 994

Grade 992 fitted with: single roller before No. 377000 double roller after No. 379301


Ca •• No.

324 431 432

432F

320

321 322 575 602 33' 335 S34A 335A 328

single roller before No. 367801 double roller after No. 367800

,uourwl

Arbor, barrel Arbor, pallet, 2 piece pallet and fork Arbor. pallet, solid pallet and fork, be/ore No. 1609001 Arbor, pallet, solid pallet and fork, after No. 1609000 Arbor, winding, P.B., all orades u p to No. 119000 Arbol', winding, lever set Al'bor, winding, P .B., after No. 718000 Dalance, complete, S.n. Dalance, complete, D.R. Barrel Barl'el and Arbor Bal'rel, M.B., Grade 99!! onlv Banel and A.rbor, M.B., Grade 99t onlv Bridge. setting wheel

16 SIZE MOVEMENTS

Ca •• No.

550 551 316

71 330 330A 325A

76 315 559 465 466 472 474 447 449 45. 461A 467 469 455 457 462 464 470

470A

451 453 479 475 476

414

546 404

405

411

412

413A

545

415 547 317

534 410 .2A 90

371 375A 375 372 373 376 425 429 326 323 382

382A 3., 396 395 393A 392 3.4 481 482A 495 517 488 511

1361 527 209 485 493 4., 192 494A

Material

Bridge, setting wheel, Btg. , P.S. Bridge, stem. Htg., P.S. Cap, ratchet C.p, hairspring stud Click, before No. 775001 Click, after No. 715000 Clutch Collet, hairspring Hub, winding wheel, 2 holes Hub, winding wheel, I hole J e wel, balance upper Jewel. balance lower End. tone. balance upper End.tone, balance lower Jewel, center upper JC!wel, center lower J e wel, escape upper Jewel, escape lower End. tone, escape upper End.tonf!l, escape or pallet lower Jewel, fourth upper Jewel, fourth lower jewel, pallet upper Jowel, paUet lower End.tone Cli P, pallet upper. before No. 1675001 End.tone Cap, vallet upper, after No. 1676000 Jewel, third upper Jewel, third lower Jewel, roller Stone. pallet. receiving Stone, pallet, discharging

(When orderin(l, please state whether pallet stone is for 30lM or ! pieGB pallet and fork. )

Le ... el', clutch, P.B.. O.F., afler No. 119000 Le ... el', clutch, P.S., 8tg .. aflcr No. 719000 Leul', setting, P.S., O.F .. N os. SUOl1 to 7 19000 incl. Leur. setting. P.S., Htg., Nos. Sf£91 1 to 119000 incl. Le"'e", setting. complete, P.S., O.F., Nos. SU9Il to 719000 inc!. Lenr, setting, complete, P,S., Htg .. Nos. Sil911 to 719000 incl. Leller. setting , P.S., O.F .. after No. 119000 Le ... er, setting. P.S., Ht'S., after No. 7 18000 Lner, shop, O.F. Le"er, shop. Bt.g. Mainllpring. St-r. 19,reflll No. 206 or Str. 18, refill No. 207 l't1ainllpring, Str. 16 ~, reOll No. 210 Nut, release stud Pallet, 2 pIece Fork, 2 piece, D.R. FOl'k, 2 piece, S.R. Pallet and F o rk , 2 piece, D.R. Pall e t and Fork , solid. D.R. Pallet, Fork and Arbor, 2 piece, D.R. Pallet, Fork and Arbor, 2 piece, S.R. Pallet, FOl'k and Arbor, solid, D.R. Pinion, cannon PInion, escape Pinion, winding Pin, push Regulator, Grades 960, 961, 971, 991, 98t, 998 and 99. Regulator, Grades 970 and 990 )(ollel'. small nollel', large )(ollel'. large &lld jewel pin. st-ee1 nollel', large and jewel pin, bronze nollel'. single noll .. ". single and jewel pin Screw, balance Scr..,w, meantime Screw. banking Screw. binding Screw, bridge Screw, pallet bridge Screw, setting wheel bridge Screw, setting wheel bridge Rtg. Screw, hairspring stud cap Screw, case SCl'ew, click Screw. balance cock Screw, dial for 4 footed. dial Serew, dial for 3 footed dial

Cat. No.

504 512 512A 498 197 49. 507 518 523 523A 516 506 508

204 524 200

529 401 565 331 417 418

419

421

549

386 3830 420

548

422

423

416 434 435 31. 607 408 342 356 363 366 332 333 3HA 32. 3130 564

Cat. No.

609 610 611 601A 612 613 614 615 616 617 618 387A 619 620 621 622

623 604A 624 625 62. 627

62' 630 631 632 479

Mater"d

Screw, ra.t.chet wheel hub Screw, winding wheel hub. 2 holes Screw, winding wheel h ub, 1 hole Sflrew, balance upper jewel Screw, balance lower jewel, or pallet cap Screw, plate jewel Screw, clutch lever or setting lever Screw, regulator, micrometric Screw, shipper, before No. 868001 Screw , shipper, after No. 868000 SCl'ew, click spring Screw, clutch spring, lever set Screw. clutch spring, or setting lever spring, P.B. Screw, regulator spring Sflrew, shipper spring. lever set Screw, setting lever sprIng, P.S., Nos . St!91110 718000 Screw, yoke, lever set Sbipper, before No. 868001 Shippcl', afler No. 868000 Spring, c1lck Spl'ing, clutch, lever set SPl'inS, clutch. O.F., P.B .• Nos. SU911 to 719000 Spring, clutch, Btg .. P.S., Nos. SfE91 I to 719000 SPl'inlJ, clutch lever. O.F., P.B., afler No. 119000 Spl'ing, c1ut.c h lever, Bt.g .. P.B . • a/ler No. 719000 Spring, hair Spring, regulator and screw SprIng, setting lever. O. F., P.S., after No. 719000 Spring, setting level', Htg .. P.S., after No. 119000 Spring, setting lever , O.F., P.B., all grades up to No. 7 19000 Spring. setting Jever. Htg., P.S .• all orlldes up 10 No. 719000 Spring. sb1pper. level' set StafT, balance, D .R. Staff, balance, S.R. SteDl, case Stud, hairspring Stud, release Wbeel, center. staiJ and pinion Wbeel, third and pinion, brass Wheel, fourth and pinion . bras9 Wb..,el, escape a nd pinion Wheel, hour Whe.,I, minute Wheel, ratchet Wbeel, setting Wheel. windi.ng Yoke. lever set

GRADE 992B /Uateriol

Al'hor, barrel Arhor. pallet Arhor, winding Balance (with screws) a.nd Hub Dalance (with screws) a nd Staff Balance, complete Barrel Darrel a.nd Arbol' Click Cli p, winding arbor Clutch Collet, ha.irsprlng Ends tone Cap, balance upper Endlltone Ca p. balance lower End. tone Cap, escape upper Endstone Cap. escape lower or pallet lower End. tone Cop, pallet upper Huh, balance wheel Jewel, balance upper or lower Jewel, center upper Jewel, center lower Jewel, escape upper or lower, or pallet lower Jewel , third and fourth upper or lower Jewel, pallet upper J e wel, pallet stQne, receiving Jewel. palle t stone, discharging Jewel, roller

Continued on page 22

21

Co" lVo,

678 679 534B

35434 633 534 635 636 637 640 641 642 643 644 481 482A 495 645 646 647 648 649 650

6093

Cat. No, 3320 3355 3400 3402 3499 3314 3315 3338 3408 3340 3335 3415 3503 3326 3440 3441 3447 3449 3417 3418 3419 3421 3422 3425 3426 3429 3431 3435 3442 3444 3436 3438 3452 3450 3451 3344 3328 3333 3404 3405 3348 3353 3334 3406 3413 3453 3453A 3460 3455 3479 3473 3475 3454

22

16 SIZE AND 12 SIZE MOVEMENTS

Material

Lo'u,r, clutcll Le't'or. shipper Main.pr ins. Str. 15~ MM Mainspri ag, (standard) str. 370, Dynacar Pallet and Fork Pallet, Fork and Arbor Pin, banking. be/ore No. 04049 Pinion, cannon Pinion, escape Pinion, winding R e gulator Roller, large Roller, large and jewel pin Roller, small Screw, balance Screw, balance meantime Screw, banking, after No. 04048 Screw, bridge or balance cock Screw. pallet bridge Screw, case Scrow, click Scrow, dial foot Screw, balance upper cap Screw, cap, balance lower, escape lower. escape upper, and pallet lower

GRADE 400 (ThIn Model)

Material Arbor. motor barrel Arbor. pallet Balance, with screws Balance and StafT, with screws Dalaoce, complete Darrel, motor Barrel , arbor. motor Cap, setting wheel Ca P . hairspring stud C lick, complete Clutch Collet, hairspring Hub, ratchet wheel 1-1 ub. winding wheel J ewel, balance upper J ewel. balaoce lower End,tone, balance upper Endetone. balaoce lower J ewel, barrel upper Jewel, barrel lower Jewel, center upper, unset Jewel, center lower J e wel, third upper, unset Jewel . third lower Jewel, fourt.h upper, unset J e wel, fourth lower Jew el , escape upper Jewel, escape lower End,tone, escape upper End,tone, escape lower Jewel, pallet upper Jewel, pallet lower Jewel. roller Stone, paUet. receiving Stone, pallet. d ischarging Lever, sett.ing Main,pri ng, Str. 16 Nut, regulator. adjust.ing Pallet and Fork Pall e t, Fork and A.rbor Pinion, cannon Pinion, escape Pinion, winding negu lator Holi er . combination, complete Screw, balance Scr ew, meantime Ser ew, banking Screw. bridge Screw, pallet bridge orw1nding wheel hub Scr e w, setting or minute wheel cap Screw. hairspring stud cap Screw. case

16 SIZE MOVEMENTS

Co" lVo,

1366 651 51S 652

6096 1798

653 654 655 656 675 657 65S 659 677 662 665 672 667 668

6042 669 670

Motorial

Sorew, pallet upper cap Scrow, shipper lever Sc rew, mlcrometric regulator Serew, regulator spring Screw, setting cap spring Scrow, hairspring stud Serew, ratchet wheel Screw, winding wheel Spring. click Sprina. clutch lever Spri ng, hair, Elinvar Extra Spring. regulator Spring, setting cap Stu fT, balance Stud, hairspring Wheel, center and pinion Wbeel. eacape and pinion Wheel. third and pinion Wheel, fourth and pinion Wheel, hour Wheel , minute Wheel, ratchet Wbeel, setting

12 SIZE MOVEMENTS

Co" lVo,

3474 3466 3461 3470 3477 3479 3471 3472 3469 3478 3342 3443 3407 3416 3411 3350 3332 3377 3386 3392 3397 3369 3370 3318 3336 3337 3322

Co" No.

1229 1230 1255 1256 1232 1301 1303

1303A 1400 1214 1216 1215

1217

Material

Serew. ratchet wheel Scre w, balance or escape lower jewel Screw, escape cap Screw, setting lever Screw, micrometric regulator Scr ew, Cllck spring Screw, clutch spring Scr ew, setting lever spring Screw. setting lever stop Serew. regulator spring Sprina , clutch Spring, setting lever Spri ns, regulator Stud, hairspring Sprlna, hair Staff, balance Stem, winding Wbeel, center and pinion Wheel, third and plnJon Wheel, fourth and pinion Wbeel, escape and pinion Wbeel , hour Wheel, minute Wbeel. ratchet Wheel, setting. small Wheel, setting, large Wheel, winding

GRADES

900' 910 914 'Grades with motor barrel

Special NolAJ:

920*

double r oller after No. 1902600 .in,le rolle,. type be/ore No. 1902601

iUlJterial

Ar bor , motor barrel, Grades 900 and 920 Arbo r , barrel, Grades 910 and 914 Arbor, pallet, Grades 900, 910 and 914 Arbor, pallet, Grade 9fO Arbor, winding Balance, with screws Balanee (with screws) and S taff, S.R. type Balance (with screws) and Staff', D.R. Balance, complete Barrel, motor, Grades 900 and 920 Barrel, Grades 910 and 914 Barrel, motor with arbor and n ut, Grades 900 and 9BO Danel and Arbor, Gradss 910 and 914

Co" No,

673 674

Cat. No,

601A 601 602 350 604A 349 348 393A 606 603 605 607

Co" lVo,

3038 1308 1224 1225 1240 1239 3035 1315 1227

1403

1226 1340 1341 1347

1347A 1348 1349 3143 1342 1344 1345

1346 1317 1318 1319 1319A 1320 1321 1330 1332 1333 1331 1334

1335 1326 1327 1328 1329 1336

1337 1338

1339 1322 1323 1324 1325 1352 1350 1351

~llJtcrial

W h eel, lower winding Wheel, winding

All other procurable parls same as Grade 99S

GRADE 992E ~laterial

BalaDce (with screws) and Hub Dalance (with screws) Hub and Staff Dalance, complete Coll et, hairspring lIub, balance wheel Jewel. roller noller Roller a.nd Pin Spring, hair, ElinMr Extra Staff, balance Sta fT, balance with hub Stud, hairspring All other procurable parts same a.t Grade 99S

~Ioeeria'

DlI'idge, setting wheel Cap, hairspring stud Cap, ratcbet wheel. Grades 900 and 9ta Cap. ratehet wheel, Grades 910 and 914 CliClk. Grades 910 and 914 Click. and epring, Grades 900 and 920 ClutClh Collet, hairspring Hub, M.B.. Grades 900 and 910. before No. 1761001 Hub, M .B., Grades 900 and 920, after No. 1761000 lIub, winding wheel J e wel, baJance upper J ewel, balance lower End, tone , balance upper. Grades 900 and gtO End.tone, balance upper, Grade 914 End.tone, balance upper, Grade 910 End.tone, balance lower Endltlone Cap, escape upper. Grade 9 f O E n d.tone, escape upper, Grade 9£0 End.tone, escape lower. Grade 920 Endatone Cap, pallet upper, with jewel, Grade 920 Endlltone, pallet lower, Grade 920 Jewel, barrel upper, Grades 900 and 920 JClwel, barrel, lower, Grades 900 and 9£0 Jewel , center upper, Grades 900 and 9£0 Jewel , cent.er upper, Grade 914 Jewel, center upper, Grade 910 Jewel, center lower Jewel, escape upper, Grade 900 Jewel. escape upper, Grade 914 Jewel, escape upper, Grade 910 Jewel, escape upper, Grade 9£0 J ewel, escape lower, Grades 900. 910 and 914 Jewel, escape lower, Grade 920 Jewel , fourth upper, Grades 900 and 920 Jewel, fourth upper, Grade 914 Jewel, fourth upper, Grade 910 Jewel . fourth lower Jewel, pallet upper, unset. Grades 900, 910 and 914 J ewel, pallet upper, unset, Grade 920 Jewel. pallet lower, Grades 900, 910 and 91, Jewel. pallet lower, Grade 920 Jewel, third u pper, Grades 900 and 920 Jewel, third upper, Grade 914 Jewel, third upper, Grade 910 Jewel, third lower Jewel. roller Stone. pallet, receiving Stone. pallet, discharging

Cot. No.

3045 3045A 1244 1244A 1246 1246A 1228 544

1304 1305 1305A

1248 1253 3054 3034 1233 1306 1306A 1312 3112 1313

3113 3114 1353 1353A 3153B

1353C 1360 494A

1376 203

1361 1375 3154

192 3157 1359 1374 1379 1365 1366 1365

3163 1362

1365

3157 1377 1358 1371 1378 1372 124 1 1243 1243A 1311 1307A 3042 3042A 1250 1250A 1316 1277

1278

1279

1287

1288 1292

1294

1297 1299

1269 1270 1218 1220 3037 3036 1222 1222A 1223

Moterltd

Leve ... clutch, Grades 900, 910 and 914 Le'f'er, clutch, Grade 9£0 Level', setting. Grades 900 and 9fO Luer , setting, Grades 910 and 914 Le'f'er, sbop, Grades 900, 914 and 9fO Le·u~r. shop. Grade 910 Mainspring. Str . 17~ . r eflll211 N ut, motor barrel arbor , Grades 900 and .£0 1'" II .,t and Fork }'allet, F ork and Arbor, Grade 9£0 Pallet, Fork and Ar b o r, Grades 900. 910 and 914 Pinion, cannon l'inion , escape, Grade 910 I'inion, escape, Grades BOO. 910 and 914 pinion, winding Pin, push Regulator. Grades 900 ana 9110 Regulator, Grades 910 and 914 noll e r, large brass, S.R. type Roller, large steel. D .R. Holl e r, large and jewel pin, brass, S.R. type Uoll e r, large and jewel pill. steel. D.R. Holler, small Scr e w, balance, Grades 900. 9 / 4 and 920 Scr ew, balance, Grade 910 Scr e w, meantime. Grades 900. 914 and .fO Ser e w, meantLme, Grade 910 Screw, banking Serew, bridge Sc rew, pallet bridge Screw, intermediate cap Scr ew, motor barr el ratchet wheel cap Scr ew , hairspring stud cap Screw, case Scr ew , click, Grades 900 and 9SG Scr e w, click, Grades 910 and 914 Scr ew , dial foot Screw, ratchet wh eel h ub Serew, winding wheel hub Scr e w, balance upper jewel Serew, balance lower jewel Scr ew , escape upper jewel, Grades 91 0, 914 and 900 Screw, escape upper jewel , Grade 9!0 Scr ew , fourth upper jewel, Grades 900 and 9!0 Scr e w, third or fourth upper jewel, Grades 910 and 914 Serew, clutch or setting lever Screw, micrometric regulator Ser e w, click spring Ser ew, clutch spring Screw, regulator spring Sc rew, setting lever spring Spring , click, Grades 910 and 914 Spring, clutch lever, Grades 910 and 914 Sprin g. clutch level', Grades 900 and 9fO Spring, hair Spring, regulator and screw Sprin g , setting lever. Grades 900 and 9fa Spring, setting lever, Grades 910 and 914 Stu fT, ba.lance, S.R. type Staff, balance, n.R. Stud, hairspring Wheel, center, staff and p1n1on. Grades 900 and 9!0 Wheel, center. statr and p 1n1on, Grade 914 Wbeel, center, staff and pin1on, Grade 910 Wheel, third and pin1oo. Grades 900. 914 and 920 Whee l, third and pinion, Grade 910 Wheel, fourth and pinion, Grades 900 and 9tO Wbe el , fourth and plo1oo, Grades 910 and 914 Wbeel, escape and pinion. Grade 9£0 Wheel , escape and pinion, Grades 900, 910 and 914 Wheel, hour Wheel, minute Wb e e l, ratchet, Grade6 900 and 9tO Wbeel, ratchet. Grades 910 and 914 Wheel, setting, small Wheel, sett;ing, large Wheel, winding, Grade £ItO Wheel, winding, Grades 900 and 914 Wheel, winding. Grade 910

12 SIZE MOVEMENTS

GRADES 902 904 912 916 918 922

Special Note:

Grode 912jitud with: non-friction balance jfn ce ling before No. 3139801 fric tion balancejewelin, ojur No. 3139800

Grode 918jiued with:

Cot. No.

3029 3030

3055 3056 3032 3 100 3101 3102 3103 3199 3200 3014 1216 3015

3017

3038 3108 3040 3035 3115 3203 3026 3140 3140F 134 1 3 147

3 147F

3147A 3148 3148F 1349 3149F 3143 3142

3144

1345 1346 3117 3118 3119 3119A 3120 3121 3122 3 123 3124 312.5 3126

3127

3128

3129 3130

3132

3133

3131

3134

3135

1336

1337

n on-friction balance jewelin, before No. 338"201 fri c tion balance jeweling after No. 3384200

.Material

Arbor. barrel, Grades 90t and 9tt Arbor, barrel, Gradu 9It. 916, 904 and 918 Arbor, pallet, straight pivots Arbor, pallet, coo1cal pivots Arbor, winding Ba lance, with gold screws Balance. with gilt screws Balance (with gold screws) and Staff Balance (with gilt screws) and Staff Balance, complete. gold screws Balance, complete, gUt screws Barrel, Grades 90t and 9tt Barrel, Grades 9U. 916, 904 and 918 Barrel, cap and arbor, Grades 90S and 9" Ba rre l, cap and arbor, Grades 9t!. 916. 904 and 91 8 Bridge, setting wheel Cap. hairspring stud C lic k Clutch Collet, hairspring Huh, motor barrel Huh. winding wheel Jewel, balance. upper J e wel, friction, balance, upper J e wel, balance, lower End8tone, balance upper, raised gold setting E nd.l!ltone. friction, balance upper, raised gold setting Endfltone, balance, upper, gold setting EDdUoDe, balance upper, gilt setting End.tone, friction, balance upper E nd 8tone, balanco lower E nd . tone, friction. balance lower End8tone Cap, escape u pper, Grade 9££ End.tone. escape upper, gold setting, Grade 9££ End.tone. escape lower, Grades 904, 918 and9U End.tone Cap, pallet, upper, Grade 9£t EDd.l!ltoDe. pallet, lower, Grade 9f! J ewel. barrel u pper J ewel, barrel lower Jewel, center upper, raised gold setting J e wel , center upper, gold setting J e wel , center upper, gUt setting J e wel , center lower Jew el, third upper. raised gold setting Jewel, third upper, gold setting Jew el, third upper, g Ut setting J e wel, third lower J ewel, fourth upper, r aised gold setting, Grades 90£ and 9U J ewel , fourth upper, gold setting, Grades 904 , 916 and 918 J ewel. fourt h upper. gilt setting, Grade .1£ J ewel , fourth lower J e we l, escape upper, raised gold setting, Grade 902 J e wel. escape upper. gold setting , Grade 916 J e we l. escape upper, gUt setting, Grade 9,. J e wel, escape upper, gilt setting, Grades 904. 9ft and 9 18 J ewel, escape lower, Grades 91£, 916 and 90e Jewel, escape lower. Grades 904. 918 and 9ft J e wel , pallet upper. unset, Grades 91£, 90t, 904. 918 and 918 Jewel. pallet upper, unset, Grade 9it

Cot. No.

3138

3139 1352 1350 1351 3045

3045A 3044

3044A 3046 3028 3104 3105 3105A 3048 3053 1253 3054 3034 3033 3 106 3106A 3112 3 113 3 114 1353

1353A 3153B 3160

494A 3155A 3176

203 3175 1354 3157

192 3179 3174 3156 3158 3166A 3162

3163 1365

1366

3166A

3168 3177 3 171 3178 3172 3041 1243A

1243 3111 3107A 3042

3042A 3050 3116 3077

3078

3079

3086

3087

3088 3092

3093

3094 3097

1298

Material

Jewel, pallet lower. Grades 911, 918. 90t and 918 Jewel, pallet lower, Grade 9SS Jewel, r oller Stone, pallet. r eceiving Stone. pallet, dIscharging Leur, clutch, Grades 90t, 9tt. 904 und .,8 Lever, clutch, Grades 911 and 916 Lever, setting, Grades 90t, 9ft. 904 and 9 18 Lever, setting, Grades 91t and 916 Lever, shop Main.pring, Str. 17~, r eflU N o. 211 Pallet and Fork Pallet, Fork and Arhor, conical pivots Pallet , Fork and Arhor, straight p ivots Pinion, cannon Pi n ion, escape, coo1cal pivots Pinion, escape. Grade 918 Pin.iou. escape, straight pIvots Pinion, winding Pin, push R egulator. Grades 90t. 9t£, 904 and 918 Uegulator, Grades 91! and 916 Roller, large Roller. large and jewel pin Roller. small Screw, balance, Grades 90f. 904 , 916, 918 and 9ft Screw, balance, Grade 91! Serew. meantLme Screw, banking Serew, bridge Screw? balance cock Screw, pallet bridge Screw. intermediate cap Screw. hairspring stud cap Screw. case Screw, click, setting lever or clutch lever Screw. dial foot Screw, winding wheel bub Screw, ratchet wheel Screw. barrel upper Jewel Screw, center upper jewel Serew. escape or pallet lower jewel Screw. fourth or escape upper jewel, Grades 90t. 904 and 918 Scre w, escape upper jewel, Grade 9tt Screw, balance. third, fourth and escape upper jewel, Grades 90£, 904. 918 and 921 Screw. balance lower Jewel, Grades 902, 904, 916 and 9t£. Screw, balance lower jewel. Grades 91tF and 918. Screw, pallet cap, Grade 9tt Serew, regulator, micrometric Screw, spring, clutch Screw. spring, r egulator Scre w. spring, setting lever Spring. click Spring, clutch lever. Grades £lOt, 904, 918 and 9£1! Spring, clutch lever. Grades 912 and 916 Spring, hair Spring, regulator, with screw Spring, setting lever , Grades 902. 904. 918 and 9t! S pring, setting lever, Grades 912 and 916 Staff, balance Stud, hairspring Wheel, center. staff and pinJon, swedged arm, gold Wh eel. center. staff and pinion , swedged arm. gilt Wheel, center, staff and pio1on, flat arm, gilt Wheel, third and pinion. swedged arm. gold Wheel , third and pinion, swedged arm, g ilt Wheel. third and pin1on, flat ann, gilt Wheel. fourth and pinion . swedged arm, gold Wheel, fourth and pin1on , swedged a rm, gUt Wheel, fourth and pinion , flat arm. gilt Wheel, escape a n d pinion, Grades 904 and 9Z2 Wheel, escape and pinion, Grade 918


23

Cut. No.

1299

3069 3070 3019

Cat. No.

6011 6034 6053A 6054A 6055A 6005 6074 6019 6015 6065 6009 6010 6079 6080 6077 6067 60.8 6073 6069 6075 6073 6081 6082 2012 6018 6022 6021 60S. 6057 6095 6029 6033 6014 6058 6063 1353 6088 6087 6094 6086 5097 6091 6092 6093 6000 1798 6096 6097 6098 6020

650

Cot. No.

1524 1525 2110 2133 1528 2151 ISS{) 2152

1581

24

12 SIZE, 10 SIZE AND 0 SIZE MOVEMENTS

lU ateriQI

Whcel, escape and pinion , Grades 902, 912 and 916 Wheel, hour Wh eel, minute Wheel, ratchet, Grades 901, 904 and 02f

GRADE 917 ~/QteriGI

Arbo r, barrel Arbor, pallet Balance, with screws Balance (with screws) a nd Staff Balance, complete Bal'rei Banel and Arbor Click Clutch Coll e t, hairspring Hub, balance wheel Hub. winding wheel Endlltone Cap, balance upper Eudlltone Cap, balance lower Jewel, balance upper or lower Jewel, center upper Jewel, center lower Jewel, escape upper or lower Jewel. third and fourth upper o r lower J ewel, pallet upper Jewel, pallet lower Stone, pallet, receiving Stone, pallet, discharging Jewel, r oller LeTer, clutch LeTer, setting Mainllpring, Str. 17 }'1M Pallet a nd Fork Pallet, Fork and Arbor P in, bankin g Pinio n , cannon Pinion, escape Pinion, winding Regula tor Rolle r, combloatJon Scr e w, balance Scr e w, balance cock Screw, bridge Screw, pallet bridge Screw, case Screw, click Screw, dial foot Screw, balance upper cap Screw, balance lowcr cap Scr e w, setting lever Scr e w, hairspring stud Screw, setting cap spring Screw, ratchet wheel Screw, winding wheel Spring, cUck S pring, Clutch lever

GRADES

981 983 985

Ilfol.eriol

Arbor. barrel. Grade 983 Arbor. barrel, motor, Grade 086 Arbor. barrel, Grade 981 Arbor, pallet Arbor, winding Balance, with screws, Grade 981 Balance , wit.h screws. Grade$ 983 and 986 Balance (with screws) a nd S t aff, Grade 981 Balance (with screws) and Staff, Grades 98S and 986

12 SIZE MOVEMENTS Co t. No.

3020 3021 3036 3037

~foteriul

Wheel, ratchet, Grades 916 and 918 Wheel, ratchet, Grade 911 Wheel. setting N o. I - large W h eel, setting N o. 2- sma lt

10 SIZE MOVEMENTS

Cot. No.

6061 6040 6027 602. 606. 6045 6052 6048 6050 6041 6017 6042 .007 601. 6008

Cot. No.

6011A 6012 6053A 0054A 6055A 600SA 6019A 6089 6071 6070 6067 6073A 6043 6080 6069 6033A 1353 6100 6093 0002 6013 6004 6099 6045A 6036 6048A 6050A 6007A 6008A

~loterial

Spring, hair. Elincar Extra Sprins. setting cap Stlllff, balance SteD1, winding Stud, hairspring Wheel, center and pinion Wheel, escape and plolon Wb eel, thJrd and pinion Wheel, fourth and pinion Wheel, hour Wheel, intersetting Wheel, minute Wheel, ratchet Wheel, setting Wheel, winding

GRADE 921 lUa teriol

Al'bor. barrel Arbor, ratchet wheel Balance, with screws Balance (with screws) and Staff Balance, complete Barr el and Arbor CIi41k Hoo k, barrel arbor J ewol. barrel upper Jewel. barrel lower Jewel, center upper Jewel, escape upper or lower End. tone Cap, escape upper End.tone Cap, escape lower lewel, fourth upper. or third u pper Pinion, escape Screw, balance Screw, regulator Screw, regulator spring Screw, regulator strap Screw, ratchet wheel Spring, r egulator Str .. p, regulator and screw Wheel, center and pinion Wheel. escape and pinien Wbeel, tbJrd a nd pinion Wheel, fourth and pinion Wh eel, ratchet Whee l, winding

All other procurable parts same as Grade 917

o SIZE MOVEMENTS

Cot. No.

2153 1581A 2105 1512 1514 2106 1513 1515 1534 1522A 2119 1537 ]538 1531 1592 1526

Muterial

Balance, complet e, Grade 081 Balance, complete, Grades 983 and 986 Barrel, Grade 981 Barrel, Grade 985 Barrel, motor, Grade 986 Barrel and Arbor, Grade 98t Barrel and Arbor, Grade 985 Barrel, Motor and Arbor, Grade 986 Bridge, setting wheel Cap, ratchet wheel, Grade 986 Click, Grade 981 Cli c k , Grade 986 Click, Grade 983 Cl utch Collet, hairspring Hub. motor barrel, Grade 986

Cat. No. MQterlQI

3022 Wheel, winding, Grade 9U 3023 Wheel, winding, Grades 001,904,916 and

918 3023A Wheel, winding, Grade 911

Cot. No.

60llA 6012 6035 6025 6024 6023 6005A 6019A 6089 6030 6071 6070 6067 6043 6080 6073A 6069 6085 6084 50S{) 6073A 6090 6064 6033 A 6059 5084 6093 5038 5085 1798 6013 6100 6093 6002 6060 6003 6039 6027 6099 6045A 6036 6048A 6050A 6006 6038

Cot. No.

1523 2109 2174 2175 1608

2176 2177 1594 1595 1596 2164 2165 1602 2170 2171

GRADE 923 ~fateri"l

Arbor, ba rrel Arbor, ratchet wheel Arbo r . pallet Balance, with screws Balance (with screws) and Staff Bullince , complete Barrel and Arbor Cl ick Hook, barrel arbor Hub. balance wheel Jewe l , barrel upper Jewe l, barrel lower Jew el , center upper Endlllone Cap, escape upper En d.tone Cap, escape lower lewel, escape upper or lower J ewel , fourth upper or lower J ewel, pallet upper En d.toue Cap, pallet upper End. tone, pallet lower Jewel, pallet lower Lever, clutch Pallet, For k and Arbor Pinion, escape Regulator Screw, balance Screw. escape upper o r lower cap Screw, pallet upper cap Screw, pallet lower cap Screw, hairspring s tud Screw, ratchet wheel Screw, reg ulator Scr e w, regulator spring Screw, regulator strap S I,ring, ball', ElinrJar ExIra Spring, r egulator S pring, setting cap StafT, balance Strap, regulator and screw Wheel, center and pinion Wheel, escape and pinion Wheel, t hird and pinion Wheel, fourth and pinion Wheel, ratchet Wheel, winding

All other procurable parts same as Grade 917

Materia'

Hub, winding wheel. Grade 983 Hub, winding wheel. Grade 98t and 986 Jewe l, balance upper J e we l, balance lower End. tone, balance upper, Grades 983 and 986 Enddone, balance upper, Grade 981 E nd810 DfI, balance lower Jewel, barrel upper , Grade 985 Jewel, barrel lower, Grade 986 Jewel, center upper, Grades 983 and 986 J ewel, center upper, Grade 981 J ewel, cen ter lower Jewel. escape upper, Grades 983 and 986 lewel, escape upper, Grade 981 Jewel. escape lower

Cot. No.

1600 2168 2169 2172 2173 1598 2166 2167 2012 2010 2011 1542 2124 1541 2123 2125 1536

1535 1527 1985 2155 1546 2128 2132 2113 2112 1584 2156 2160

Cot. No.

1911 1934 1112 1984A 1905 1906 1918 1909 1919 2515 2565 1910 2006 2006A 2007 1119 2008

2008A

2009 1761 1996 1991 1713 2002 2003 1771 2000 2001 2004 2005 1169 1998 1999 2012 2010 2011 1725 1724 2422 1126 1921 1985 1986 1929 1933 1714 1914 1113

o SIZE AND 6/0 SIZE MOVEMENTS

Material

Jewel, fourth upper, Grades 983 and 986 Jewel, fourth upper. Grade 98 J Jewel, fourth lower Jewel, pallet upper. unset Jewel, pallet lower Jewel, third upper, Grades 988 and 986 Jewel, third upper, Grade 981 Jewel, third lower Jewel, roller Stone, pallet, receiving Stone. pallet. discharging Leur, clutch, Grades 988 and 986 Lever, clutch, Grade 981 Le'f'er, setting, Grades 988 and 985 Le.er, setting, Grade 981 Lever, shop Mainspring, Str. 14 ~ . r c611 212, Grades 981 and 98S .Mainspring, Str. 14 ~ . M.B .• Grade 985 Nut, motor barrel arbor, Grade 985 Pallet and Fork Pal.let, Fork and Arbor I'inion . cannon, Grades 983 and 985 Pinion, cannon, Grade 981 Pinion. escape Pinion, winding Pin, push RelJulator. Grades 983 and 986 Regulator. Grade 981 Roller. large

GRADES

986 988 ~foteriol

Arbor, barrel Arbor, pallet Arbor. winding, Grade 988 Balance. complere Barrel Barrel and Arbor Cap, intermediat.e wheel Cap, ratchet wheel Click C luteh Cotlet, hairspring Hub, winding wheel Jewel, balance upper, .080 0.0. Jtlwel. balance upper, .070 0.0. J e wel, balance lower E nd. tone. balance upper , Grade 988 End. tonti, balance upper, .080 O.D. , Grade 986 Enddone, balance upper, .010 0 ,0., Grade 986 End.tone. balance lo wer Jewel, center upper, Grade 988 Jewel, center upper, Grade 986 J e we l, center lower Jewel. escape upper, Grade 988 Jewel, escape upper, Grade 986 l ewel, escape lower lewel, fourth upper, Grade 988 Jewel, fourth upper, Grade 988 J ewel, fourth lower Jewe l , pallet upper, unset Jewel. pallet lower Jewel. third upper, Grade 988 Jewel, third upper, Grade 986 Jewel, third lower Jewel. rolier Stone, pallet, rece1ving Stone. pallet, discharging Lever, clutch, Grade 988 Lever, setting, Grade 988 Le'O'er, shipper, Grade 986 Lever. shop, Grade 988 Main.pring. Str. 13.l11, reflll No. 213 Pallet and Fork Palltlt. Fork and Arbor Pinion. cannon Pinion, escape Pinion, winding, Grade 988 Pinion, winding, Grade 986 Pin, push, Grade 988

o SIZE MOVEMENTS Cot. No.

2161 2564 16 13 2181 2384A 2013A 1360 16 15 2191 203

1620 2183 192

3151 192

1314

163 1 2199

2189 1366 2191 1629 1358 1630 2194 2196 1241 1540

iUateriol

Roller. large and Jewel pin Roller, small Screw. balance, Grades 983 and 985 Screw, balance. Grade 981 Scre w. meantime, Grades 983 and 985 Scr e w, meantime, Grade 981 Scr ew , banking Scrtlw. bridge Screw. pallet bridge Scrtlw. intermediate cap Screw. ratchet wheel cap Screw, case Screw. click. Grades 98$ and 885 Screw. click, Grade 881 Scr ew, dial foot Scrtlw. ratchet wheel hub, Grades 981 and 988 Screw. winding wheel hub, Grade 883 Scr ew , winding wheel hub, Gradu 881 and 886 Scr ew, balance upper jewel Scrtlw, balance lower jewel Sorew, clutch lever or setting lever Scrtlw. regulator, micrometrlc Sortlw. click spring, Grade 881 Sorew, regulator spring Sorew. setting lever spring Sorew. hairspring stud Spring. click, Grade 881 Spring, clutch lever , Grades 883 and 986

6/0 SIZE MOVEMENTS

CoC. No.

2351 1991 1992 2363 2564 2584 2013 2384A 2013A 2019 2581 2588 2028

208 1785 2014 2014A 1181 2381 2590 2026 1802 2029 2592 1366 1192 2400 1361 2028 2031

208 2031 1198 1920 1123 1923 1990 1722 1925 1921 1927A 2526 2366 1975 1978 1980 1982 1911 1972 1901 1916 1911 1908

Material

Regulator Roller, large, brass Roller, large and jewel pin, braM Roller. large and jewel pin, steel Roller. small Screw. balance, Grade 988 Screw, balance, Grade 986 Screw, meantime, Grade 988 Screw, meantime, Grade 986 Se rew, banking Screw. bridge Screw, balance bridge Screw, pallet bridge Screw, intermediate cap Screw, case, Grade 988 Screw, case, short, Grade 986 Screw, case, long, Grade 986 Scr ew. click, Grade 888 Screw, elick, Grade 986 Scr tlw. dial toot Screw, ratchet wheel hub Screw, winding wheel hub, Grade 988 Screw. winding wheel hub, Grade 986 Screw, balance upper Jewel Screw. balance lower jewel Screw. clutch lever, Grade 988 Screw, shipper lever, Grade 986 Screw. click spring Screw, clutch spring Screw, retaining spring Screw, shipper lever spring, Grade 986 Sc rew. setting lever spring, Grade 988 Screw. hairspring stud Spring, click Spring, clutch lever. Grade 988 Spring. retaining Spring. hair Spring, setting lever, Grade 988 S pring. shipper lever, Grade 986 Stuff, balance, S.B., before 2041401 Staff, balance, D.R .. a/ler 1041400 SteDl. winding, Grade 986 Stud. hairspring Wheel. center, staff and p1nion Wheel, third and pinion Wbeel, fourth and p1nion Wheel, escape and pinion Wbeel, hour Wbeel. minute Wbeel. ratchet Wbeel, setting, small Wbeel, setting, large Wheel, winding

Cot. No.

2122 2159 1585 1539 2121 2126 2366 1566

1561

2143

1512 2146

1516 2148

2150 2139 2139A 2140 1516 1519 2101 2115 1520 1521 2108

Cot. No.

2311 2334 2354B 2505 2306 2318 23 19 2515 2565 2310 2317 2007 2367 2368 2360 2370 2371 2372 2373 2374 2515 2574 2012 2379F 2380 2010 2011 2422 2321 2355 2356 2329 2333 1914 2351 2362 2363 2564 2013 2584 2384A 2014A 2588 2390 2587 2399

208 1198 2381 2590 2391 2598

& w

lUaterial

Spring, clutch lever, Grade 981 Spring, hair Spring. regulator and screw S pring. setting lever, Grades 983 and 986 Spring, setting lever, Grade 981 StafT, balance Stud, hairspring Wheel, center, staff and pinion, Grade 985 Wheel. center, staf!' and pinion, Grade 98S Wheel, center, s taf!' and pinion, Grade 981 Wheel, third and plnjon, Grade 985 Wheel. third and p1nion, Grades 981 and 9 .. Wheel. fourt h and p1nion, Grade 986 Wheel, tourth and pinJon, Grades 981 and 989 Wbeel~ escape and pinJon Wheel. hour, long pipe Wheel. hour, short p ipe Wheel, minute Wheel, ratchet, Grade 986 Wheel. ratchet, Grade 983 Wheel. ratchet, Grade 981 Wheel, setting Wheel. winding, Grade 986 Wheel. winding, Grade 983 Wheel. winding , Grade 981

GRADE 986A Jlfoteriol

Arbor. barrel Arbor. pallet Balonce, complete Barrel Barrel, arbor fitted Cap. intermediate wheel Click Clutch Collet. hairspring Hub, winding wheel Jewel. balance hole, upper Jewel, balance hole, lo'ver Jewel. center upper Jewel, center lower Jewel. third upper Jewtll. third lower Jewel. fourth upper Jewel. fourtb lower J e wel, escape upper Jewtll. escape lo"et Jewel, pallet upper, unset J ewe •• pallet lower Jewel. roller End. tone. balance upper Enduone, balance lower Stone. pallet. receivIng Stone, pallet, discharging Le"er. shipper Main.pring. Str. 12 .l11, refl.ll 214 Pallet and Fork Pallet, Fork and Arbor Pinion , cannon Pinion. escape Pinion, winding Regulator Roller. large Roller, large and jewel pin Roller, small Screw. balance, brass Screw, balance, gold Screw, balance, meantime Scrtlw. case Screw. balance bridge Screw, banking Screw. bridge Screw. pallet bridge Screw. intermedJate wheel cap Screw, hairspring stud Screw, cUck Screw, dial foot Scrtlw, rat:.ehet wheel SCl'tlW, winding wheel hub


25

Cat. No.

2592 2593 239' 2395 2400 2589 2320 2361 2425 2327 2526 2366 2545 2348 2350 2552 2341 2542 2507 1916 1917 2508

Cat. No.

2511 2334 2555A 2505 2500 2513 2319 2515 2565 2310 2379F 2580 2377 2578 2567 2567F

2568 2568F 2569 2569F 2570 2570F 2571 2571F

2572 2572F 2573 2573F

2574 2574 F

2575 2575F

2012 2010 2011 2522 2521 2355 2356 2529 2533 2514 2357 2362 2363

26

MlSter'a'

Screw, balance upper jewel Serew, balance lower jewel Serew, third, fourth or escape upper jewel Screw, center upper jewel Screw, shIpper lever Screw, shipper lever spring Spring. click Spring, hair Spring, shipper lever Staff, balance SteID., winding Stud,hairspring Wheel, center, stafl' and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel , minute Wheel, ratchet Wheel, setting, small Wheel, setting, large Wheel, winding

GRADES

987 987E 987F

Material

Arbor, barrel Arbor, pallet Balance, complete Barrel Barrel and Arbor Cap, intermediate wheel Click Clutch Collet, hairspring Hub, winding wheel Endstone, balance upper Endlltone, balance lower Jewel, balance upper Jewel, balance lower Jewel, center, upper, Grade 987 Jewel, center upper, Grades 98iE and B87F Jewel, center, lower, Grade 987 Jewel, center,lower, Grade 98iE and 987F Jewel, third upper, Grade 987 Jewel, third upper, Grades 98iE and 98iF Jewel, third lower. Grade 987 Jewel, third lower, Grades 98iE and 98iF Jewel, fourth upper, Grade 987 Jewel, fourth upper, Grades 98iE and 987F Jewel, fourth lower, Grade 98i Jewel, fourth lower, Grades 98iE and987F Jewel, escape upper, Grade 987 Jewel, escape upper, Grades 98iE and 98iF

Jewel, escape or pallet lower, Grade 987 Jewel, escape or pallet lower, Grades 987E and 98iF Jewel, pallet upper, unset, Grade 98i Jewel, pallet upper, Grades 987E and 98iF Jewel , roller Stone, pallet, receiving Stone, pallet, discharging Lever, shipper Mainllpring. Str.12 Pallet and Fork Pallet, Fork and Arbor Pinion, cannon Pinion, escape Pinion, winding Regulator Roller. large Roller, large and jewel pin

6/0 SIZE MOVEMENTS

Cat. No .

2564 2584 2384A 2586 2390 2587 2588 2399 2396 1798 2387 2590 2397 2598 2592 2593 2592

2595 2500 2589 2320 2561 256lA 2525 2527 2526 2366 2545 2548 2550 2552 2541 2542 2507 2516A 2508

Cat. No.

2511A 2334 2534 2535 2536 2505A 2506A 2319 2515 2565 2310 5077 2567A 2568A 2569A 2570A 2571A 2572A 2573A 2574.."-2575A 2012 5079 5093

5080

2010 2011 2522A 2518 2321 2355 2356 2529 2533

Material

Roller, small Screw, balance Screw, balance, meantime Screw, case Screw, banking Screw, bridge Screw, balance cock Screw, pallet bridge Screw. setting wheel bridge Screw, hairspring stud Screw, click Screw, dial foot Screw. ratchet wheel Screw, winding wheel hub Screw, balance upper jewel, Grade 98i Screw. balance lower jewel, Grade 987 Screw. third, fourth or escape, upper jewel Screw, center upper jewel Screw, shipper lever Screw, shipper lever spring Spring, click Spring, hair, Grades 987 and 987F Spring. hair, Grade 987E Spring, shipper lever Staff. balance StIBID., winding Stud, hairspring WhIBel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel, intersetting Wheel, winding

GRADE 987A

IUaterial

Arbor. barrel Arbor. pallet Balance, with screws Balance (with screws) and Staff Balance, complete Darrel Barrel and Arbor Click Clutch Collet, hairspring Hub, winding wheel Jewel, balance, upper and lower Jewel. center upper Jewel. center lower, unset Jewel, third upper Jewel, third lower Jewel. fourth upper Jewel, fourth lower Jewel, escape upper Jewel. escape or pallet lower Jewel, pallet upper Jewel, roller Endlltone Cap, balance upper Endlltone Cap, balance lower, 2 screw holes Endlltone Cap, balance lower, screw hole Stone, pallet, receiving Stone, pallet, discharging Lever, setting Lever. clutch Mainllpring, Str. 1272', refill 214 Pallet and Fork Pallet, Fork and Arbor

. Pinion, cannon Pinion, escape

Cat. No.

2514A 2357A 2362 2363 2564 2584 2586A 2587A 5094 5095 2387 2590 2397 5096 2598 5092 5096 2500A 2320 2561B 2920 2513A 2527 2526A 2366 2545 2548 2550 2552 2541 2542 2507A 2516A 2508A

Cat. No.

2509 2524 2530 2537 2510 2512 5096 2517 6225 2538 2562 2577 2544 2556

Cat. No.

2567 2669 2671 2673 2673F 2674 2674F 2675 2676 2621 2633 2663 2698 2696 2652

Mater'al

Pinion, winding Regulator Roller, large Roller, large and jewel pin Roller, small Serew, balance Serew, case Serew, brIdge or balance cock Serew, pallet bridge Serew, hairspring stud Serew, click Serew, dial foot Serew, ratchet wheel Screw, setting cap spring Screw, winding wheel hub Screw, balance upper endstone cap Screw, balance lower endstone cap Screw, setting lever Spring, click Spring, hair, Elinflar Extra Spring, clutch lever Spring, setting cap Staff, balance Stem, winding Stud, hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, escape and pinion Wheel, hour Wheel, minute Wheel, ratchet Wheel, intersetting Wheel, winding

GRADE 987S

Material

Cap, seconds setting lewel. center upper Jewel, fourth upper Jewel, third upper LeTer, seconds setting Pinion, center seconds and starr Screw, seconds setting cap Screw. stabilizer spring Spring. seconds setting lever Spring. stabilizer Wheel, center seconds Wheel. center, staff and pinion Wheel. fourth and pinion Wheel, third and pinion

All other procurable parts same as Grade 98i A

GRADE 979

Material

Jewel, center upper Jewel, third upper Jewel, fourth upper Je'Wel, escape upper, non-friction Jewel, escape upper, friction Jewel, escape lower, non-friction Jewel, escape lower, friction End,.tone, escape upper Endlltone, escape lower Mainllpl"ing. Str. 1172' Pinion, escape Roller, and jewel pin Screw, winding wheel hub Screw. escape lower endstone Wheel, escape and pinion

All other procurable parts same af Grade 987

Co •• No.

7211 7234 7253 7254 7255 7205 7206 7209

7219 7215 5065 7279 7280 7210 7267 2568A 7269 7270 7272 7273 7275

7277 2983 7281 7282 7218 7222 7221 7256 7257 6095 7229 7289 7233 7214 7258 2963 7284 7293 7286 7288 7291 7295 7294 7297 7294

Cat. lVo.

4020 4055 4000 4001 4002 4014 4015 4013 4140 4135 4115 4010 4040 4041 4019 4021 4022 4025 4026 4029 4033 4034 4031 4035

8/0 SIZE AND 12/0 SIZE MOVEMENTS

GRADE 747 Materia'

Arbor, barrel Arbor, paller.. Balance , with screws BalaDce. (with screws) and staff Balance, complete Barrel Barrel and IIrbor Cn Ill, balance upper endstone cap retalning Click C lu1.ch Collet, hairspring Endatone Cap, balance upper End.tone Cap, balance lower nub. winding wbeel Jewel, center upper Jewel, center lower Jewel, third or fourth upper Jewel, third lower Jewel, fourth lower lewel, escape upper Jewel, escape lower and pallet upper or lower Jewel, balance upper or lower Jewel, roller Stone, pallet, receiving Stone, pallet, discharging I,eyer, clutch Leyer, setting l\Iain8pring. Str. 9 Pallet and fork Pallet, fork and arbor ]'i n, banking Pinion, cannon Pinion, cannon, long (or spherical dial Pinion, escape Pinion. windIng Regulator Roller, combinatIon, complete Screw. balance Screw, balance lower cap Sc:rew, bridge or balance cock Sc:rew, cUck Sc:rew, dial foot Sc:rew, hairspring stud Screw, pallet bridge Scr ew. ratchet wheel Serew. setting cap spring

GRADE 401 Material

Arbor, barrel Arbor, pallet Balunee, with screws Bulanee (with screws) and StafT BalanCle. complete Barrel Burrel and Arbor Cap, setting and minute wheel Cliek Clutch Colle t , hairspring Hub. winding wheel Jewel, balance upper Jewel, balance lower Jewel, center upper Jewel, center lower Jewel, third upper Jewel, third lower Jewel, fourth upper Jewel, fourth lower J ewel. intermediate pinion upper J ewel, intermediate pinion lower Jewel. escape upper Jewel. escape lower

8/0 SIZE MOVEMENTS

Co,. No.

1300 7293 7220 7225 7240 7261 7227 7226 6266 7245 7248 7250 7252 7241 7283 7242 7216 7207 7208

Co •• No.

7211 7234 7253 7254 7255 7205 7206 7209

7219 7215 5065 7279 7280 7210

·7367 2568A 7269 7270 7273 7275

iUateritd

Screw, setting lever Screw, winding wheel hub Spring. click Spring, clutch lever Sprins, setting cap Spring, hair, Elintlar Extra Stu fT, balance Stem, winding Stud. hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wh eel, escape and pinion Whee l, hour Wheel, hour, long pipe for spherical dial Wheel, minute Wheel, setting Wheel. ratchet Wheel, winding

GRADE 748 ~Iaterial

Arbor, barrel Arbor, pallet Balance, with screws nulanec. (with screws) and staff B alance, complete Barrel Barrel and arbor Cu m, balance upper endstone cap rotalnlng Cliek Clutch Collet, bairsprlng End. tone Cap, ba.lance upper Eudstone Cap, balance lower Hub, winding wheel Jewel . center upper Jewel, center lower Jewel, third. fourth or fifth , upper Jewel, .. hird or firth lower Jewel, escape upper J ewel . escape lower and pallet upper or lower

Co •• lVo.

7277 2983 7281 7282 7218 7222 7221

*7356 *7351 6095

*7329 *73298 *7333 7214

*7301 7258 2963 7284 7293 7286 7288 7291 7295 7294 7297 7294 7300 7293

*7302 7293 7220 7225 7240 7261 7227

*7303 7226 6266

*7345 *7348 *7350 ·73508

*7352 7241 7242 7216 7207 7208 7304

JJlateria'

Jewel, balance upper or lower Jewel, roller Stone. pa.lIet, receiving Stone, pallet, discharging Lever. clutch Lever, sottlng J\lainlilpring. Str. 9 Pallet and fork Pall e t, fork and arbor l'in, banldng Pinion, ca.nnon Pinion, cannon for spherical dial Phlion, escapo Pinion, winding Plate, thrust Uegulator Roller, combination. complete Screw, balance Screw. balance lower cap Screw, bridge or balance cock Screws , ctick Screw, dial Screw, hairspring stud Screw, paUet bridge Serew, ratchet wheel Screw, setting cap spring Screw, setting lever Screw, third lower jewel plate Screw, thrust plate Screw, winding wheel hub Spring, cUck Spring, clutch lever Sprins, setting cap Spring, hair, EUnf!ar Extra StafT, ba.lance Staft, flfth-complete with wheels Stell., winding Stud. hairspring Wheel, center and pinion Wheel, third and pinion Wheel, fourth and pinion Wheel, fourth and pinion for spherical

dial Wheel, escape and pinion Wheel, hour Wheel, minute Wheel. setting Wheel, ratchet Wheel, winding Yoke, bridge. after serial number CY80600

"Parts applicable to G,.ade 748 only.

12/0 SIZE MOVEMENTS

Cat. Cat, No. Material No. Material

4036 Jewel, pallet upper 4173 SClrew, setting or minute wheel cap 4038 Jewel. pallet lower 4175 Screw, hairspring stud 4052 Jewel, roller 4157 SClrew, click 4047 End. tone. balance upper 4179 Serew, winding wheel hub 4049 End. tone, balance lower 4174 SClrew, ratchet wheel 40SO Stooe, pallet, receiving 4166 Screw, center lower jewel 4051 Stone, pallet, discharging 4159 Screw, dial foot 4044 Le .. er. setting 4171 Sere .... , clutch lever 4045 Leyer, clutch 4170 Serew, setting lever 4128 Maln.prIng. Str, 12}i 4141 Spl'in., Cllck 4104 Pallet and Fork 4142 Spring, clutch lever 4105 Pallet, Jo'ork and Arbor 4116 Stud, hairspring 4148 Pinion, cannon 4111 Spring, hair 4053 Pinion, escape 41SO Sta fT, balance 4134 Pinion. winding 4126 Stem, winding 4133 Pi niOD, intermediate 4149 Walber, wInding wheel hub 4106 Regulator 4077 Wheel, cen ter and pinion 4113 Roller. combination, complete 4086 Wheel. third and pinion 4153 Screw, balance 4092 Wheel. fourth and pinion 4153A Screw, meantime 4097 Wheel. escape and pinion 4160 Serew, ba.nking 4069 Wheel. hour 4155 SClrew. bridge 4070 Wbel'Jl. minute 4154 Screw, case 4118 Wheel, ratchet 4156 Screw, balance cock 4136 Wheel, setting 4176 Serew. pa.llet bridge 4122 Wheel, winding

27

Co •• No.

7611 7234 7653 7654 7655 7605 7606 7219 76 15 5065 7679 7680 7681

7682

7210 7267 766S 7269 7270 7272 7273 7678

7275

7677

Cat. No.

5011 2934 5053 5054 5055 5005 5006 2319 5015 5065 507. 50SO

5093

5010 5077 5067 5068 5068A

5073 5074 5069 5072 5075 5076 5069 5070 2983 5081 5082 5018 5022 5021 5056 5057 2990A 5029 5089 6033 5014 505S 2963 50S. 2990 5086 5087 5094 5096 2387

28

12/0 SIZE (NEW) AND 14/0 SIZE MOVEMENTS

GRADES 752-753-754 Material

Arbor, barrel Arbor, pallet BlllRnce, with screws Bahlnce, with screws and staff Billancc. complete Barrel Bllrrel and Arbor Click Clutch Collet. balrspring Endltoue Cap. balance upper Endstoue CliP, balance lower Endetone Cap, escape upper. Grades 753 -754 Endstone Cap, escape lower, Grades 753-7S4 Hub. winding wheel J e wel, center upper Jewel. center lower Jewel, third o r fourth upper Jewel. third lower J ewel, fourth lower Jewel, escape upper Jewel, escape upper or lower, Ollve hole, Grades 753-754 Jewel, escape lower and pallet upper or lower Jewel, balance upper or lower

GRADE 980 ~foterial

Arbor, barrol Arbor. pallet Balanee. with screws Bal~lDee (with screws) and Staff Balanee. complete Barrel Barrel and Arbor Cliek Cluteb Collet, haIrspring End.tone Cap, balance upper End.tone Cap, balance lower, before No. 0177001 End.tone Cap, balance lower, after No. GI17000 Hub, windlog wheel Jewel. balance upper or lower unset Jewel. center upper Jewel , center lower, before No. GJ70701 Jewel. center lower, unset, after No. OS70700 Jewel. escape upper Jewel. escape lower Jewel, fourth upper Jewel, fourth lower Jewel, pallet uppor Jewel, pallet lower Jewel, third upper Jewel, thlrd lower Jewel, roller Stone, pallet, receiving Stone, pallet. discharging Le'f'er. clutch Le'f'er. setting Mainsprin8, Str. 11 Pallet and Fork Pallet, Fork and Arbor Pio. banking Pinion. cannon r eguJar Pinion, cannon, long, for spherical dlal Pinion, escape Pinion. winding Regulator RoUer. combloation Serew, balance Screw. banklog Screw, balance cock Screw. brIdge Serew. pallet bridge Serew. setting wheel cap Screw, click

NEW 12/0 SIZE MOVEMENT Co •• No.

2983 7281 7282 7618 7222 44431

44432

44433

7256 7257 6095 7629 76290 76298 7633 7634 7214 7658 2963 7284 7293 7492 7286 7288 7291 7693

lUsterisl

Jewel . roller Stone, pallet, receiving Stone, pallet, discharging Leyer, clutch Lever, seLting Main.prins, Dunaoar, strength ,0815 mlm MalDspring, Dunaoar, strength .0865 mlm MainsprinK. Dunaf)ar, strength .0915 mlm Pa llet and Fork Pallet, .'ork and Arbor Pi n, banking Pinion, cannon, regular Pinion, cannon, for curved dials Pinion, cannon, for spbeMcal dials Pinion, escape, Grade 75! Pinion. escape, Grades 753-75lt Pinion. winding Regulator Roller. combloatlon, complete Sere w. balance Screw, balance lower cap Serew. balance upper cap Serew. bridge or bala.nce cock Serew. click Serew. dial toot Serew, escape lower or upper endcap, Grades 753-754

14/0 SIZE MOVEMENTS

Cat. No.

5091 5092 5096

5085

5000 5096 5096 5095 5097 509S 2320 5025 5001 5099 5027 5026 5066 5045 5052 5048 5050 5041 5083 5042 5007 5016 5008

Cat. No.

5OSO 5029B 2529A 503' 5062 2996 6096 5012 6063 5042A 5045B 2541 5017

~faterial

Screw, dial foot Screw. balance upper cap Screw. balance lower cap, before No. 0177001 Screw, balance lower cap, after No, GI77000 Screw. setting lever Serew. setting cap spring Serew, satt-log lever spring Serew, halrsprlog stud Screw, ratchet wheel Serew. windi.n.g wheel Sprin8. click Spring, clutch lever Sprin8, hall' , EUnoar Extra Spring. setting cap Staff. baJance StelD. winding Stud, hairspring Wbeel, center and pinion Wheel. escape and pinion Wheel, third and pinion Wheel . fourth and pinion Wbeel. hour, regular Wheel , hour, long pipe, for spherical dial Wheel, minute Wheel. ratchet Wheel, setting Wbeel. windIng

GRADE 980A

~fa'er'al

End.tone CIlP. balance lower Pinion, cannon Pinion. minute hand Po.t, auxiliary minute wheel Po", malo hand Screw, auxiliary minute wheel spring Serew. jewel. balance lower cap Sprin(l:. audlJary minute wheel WIl.her. hour wheel Wheel, auxiliary minute Wheel, center and pinion Wheel, hour Wheel, minute

All other procurable parts same as Orad, 980

Co •• No.

7295 7294 7297 7294 7300 7293 2920 7225 7640 7661 7627 7626 6266 7645 7648 7650 7652 7651

7641 76410 76419 7642 7616 7007 7609 7612 7608 7610

Cot. No.

5009 5064 5063 5043 5045B 5090 5017 5035

Cal. No.

6036 5080 5037 5039 5033A 5038 5085 5052A 5007A 5023 5008A 5024

Cat. No.

507S 5093 5036 50SO 5037 6039 6033A 5071 5085 5038 5085 5052A 5007A 5008A

Mauriel

Screw. hairspring stud Screw, pallet brIdge SCl'CW, ratchet wheel Screw, setting cap spring Screw, setting lever Screw, winding wheel hub Spring. click Spring, clutch lever Spl'1118, setting cap Spring, hair, Elinvar-Extra Staff, balance Stem, winding Stud. hairspring Wheel. center and pinion Wheel, thlrd and pinion Wheel, fourth and pinion Wheel, escape and pinion, Grade 752 Wheel. escape and pinion, Grades 753-75. Wheel, hour, regular Wheel, hour. for curvt>d dIals Wheel, hour, ror spherical dials Wheel. m1nute Wheel, setting Wheel, ratchet, Grade 75% Wheel, ratchet. Grade 758 Wheel, ratcbet, Grade 754-Wheel, winding , Grade 7S! Whed. winding, Grades 753-754

GRADE 980B Materiat

Pinion, cannon Poet, main hand Washer, hour wheel Wheel, auxiliary minute Wheel, center and pinion Wheel. hour Wheel, minute Wheel. minute hand All other procurable parts same as Grade 980

GRADE 982 Matericd

Endstone Cap, escape upper End.tone Cap. escape lower Jewe l, escape upper Jewel, escape lower Pinion, escape SCl'ew. escape upper cap Screw, escape lower cap Wheel, ~pe and pinion Wbeel, ratchet, before No, J8S001 Wheel, ra.tchet, affer No. J8S000 Wheel, winding, before No, J8S001 Wheel. winding, after No. J8S000 All other procurable paru same IU Grade 980

GRADE 982M Materia'

End.tone Cap, balance upper End. tone Cap, balance lower End.tooe Cap, escape upper Ends tone CIlP, escape lower Jewel, escape upper Jewel, escape lower Pinion. escape Regulator Screw. balance lower cap Screw, escape upper cap Screw. escape lower cap Wheel, escape and pinion Wheel. ratchet Wbeel, winding All other procurable parts same as Grade 980

I

!

!

I

I

I

I

18/0 SIZE, 20/0 SIZE AND 21/0 SIZE MOVEMENTS

Cat. No.

2711 2734 2753E 27ME 2755E 2705 2706 2713 2319 2715 5065 2710 2771 2778 2779 2780 2767 2768 2769

Cat. No.

2911 2934 2953A 2954A 2955B 2905A 2906A 2919 2915 2965 5010 2979A 1980A 1977A 2967A 2968A 2969A 2970A 2973A 2974A

GRADES

989 989E

Material

Arbor, barrel Arbor, pallet Balance, with screws Balance (with screws) and Stnff Balance, complete Barrel Barrel and Arbor CD. p. setting wheel C lick C luteb Collet, hairspring Hub, winding wheel Jewel, balance upper Jewel, balance lowe. End. tone Cap, balance upper End.tone Cap, balance lower Jewel, center upper Jewel, center lower lewe l. third or fourth upper

GRADE 997

MaterhJl

ATbor. ba.rrel Arbor, pallet Babnee, with scr ews Ba lance (with screws) and StalT Balance, complete Barrel Barrel and Arhor Click Clutch Collet, hairspring Hub, winding wheel End. tone Cap, balance upper End. tone Cap, balance lower Jewel , ba.lance upper or lower Jewel, center upper J ewel, center lower, unset Jewel, third Or tourth upper J ewel , third or fourth lower, unset Jew el , escape upper J ewel, escape lower, unset

GRADE 721 Caution: The following parts tor Grade 721 are

not interchangeable with thoBe in the 995 or 995A movements: Wheel, center, and pinion; Wheel, third, and pinion: Wheel, fourth, and pinion; Wheel, escape, and pinion.

Cat. No.

2911 2934 2953A 3254 3255 2905A 2906A 2919 2915 2965 5010 2979A 3280 6278 2967 2968A 2969 2970A 2969 2970A 2973

i'ofate riol

Arbor, barrel Arbor, pallet Balance. with screws Balance (with screws) and Staff BaI .... ce. complete Barrel B .. rrd and Arbor Click Clutch Collet Hub, winding wheel End. tone Cap , balance upper End.tone Cap, balance lower Jewel, balance upper or lower, unset Jewe l, center upper J e wel, center lower, unset Jewel. third upper J ewel, third lower, unset J e wel, tourth upper Jewel, fourth lower, unset Jewel , escape upper

18/0 SIZE MOVEMENTS

Cot. No.

2770 2773 2774 2975 2776 2783 2781 2782 2722 2721 2756 2757 2729 2733 2714 2758 2963 2784 2784A 2787A 2390 2787 2796 2794

Material

Jewel , thlrd or fourth lower Jewel, escape upper Jewel, escape lower Jewel, pallet upper Jewel, pallet lower Jewel, r oller Stone, pallet receiving Stone, pallet dlscbargiog Level'. setting Main.pring, Ste. 8~ Pallet and Fork l~allet, Fork and Arhor Pinion, cannon Pinion, escape Pinion. winding Regulator Roller, combination, complete Screw, balance Screw, balance, meantime Screw, balance cock Screw, banking Screw, bridge Screw, seLting wheel cap Screw, pallet bridge

20/0 SIZE MOVEMENTS

Cat. No.

2975A 2976A 2983 2981 2982 2922 291 8 2921 2956 2957A 2990A 2929A 2933 2914 2958A 2963 2984 2986 2992 2987 2994 2996 2995

h/aterial

J e wel, pallet upper lewel, pallet lower, unset Jewel, roller Stone, pallet receiving Stone, pallet discharging Lever, setting Lever, clutch Mainlpring. Ste. 7711 Pallet and Fork Pallet , Fork and Arbor Pin , banking Pinion, cannon Pinion, escape Pinion , winding Regulator Roller. combination , complete Screw, balance Screw. balance cock Screw, balance upper endsoone cap Screw, barrel or train bridge Screw, paUet bridge Scr.,w, setting cap spring Screw, hairspring stud

21/0 SIZE MOVEMENTS

Cot. No.

2974A 6275 2983 2981 2982 2918 2922 2921 2956 2957A 2990A 2929A 3233 2914 6258 2963 2984 2992 5096 2986 2987 2994 2988 2790 2900 6295 2989A 5096 2997

~/oteriol

Jewel , escape lower, unset Jewel, pallet upper or lower, unset Jewel, rolJer Stone, paUet, receiving Stone, pallet, discharging Lever. clutch Lever, setting Mainlpring, Ste. 7~ MM. J'alle t and Fork Palle t, Fork and Arbor Pin, banking Piuion, cannon Pinion , escape Pinion, winding n eg ulator noUer, combination Scr .,w, balance Screw, balance upper endstone cap Screw, balance lower endstone cap Screw, balance cock Screw, bridge Screw. paJlet bridge Scr e w, click Screw, dIal toot Screw, setting lever Screw, hairspring stud Screw, clutch lever spring Screw, setting cap spring Screw. ratchet wheel

Cat. No .

2795 2387 2790 2797 2998 2793 2700 2789 2320 2761 2761E 2725 2727 2726 2766 2745 2748 2750 2752 2741 2742 2707 2716 2708

Cat. No.

2988 2998A 2997 5096 5091 2900 2989A 2920 2925 2940 2961B 2927 2926 3266 2945B 2948A 2950A 2952 294 1A 2942 2916 2908A 2907A

Cat. No.

2998A 2920 2925 3261 2940 3227 2926 3266 3245 3248 3250 3252 2941A 2942 2907A 2916 2908A

Cot. No.

7411 2934 7453 7454 7455 7405 7406

l"areri.1

Serew, bairspring stud Serew, cllck Scr(lw. dial toot Screw. ratchet wheel Ser(lw. winding wheel hub Screw. jewel balance lower Scr(l w, setting lever Scr(lw, setting lever spring S prins . click Spring. haIr, Grade 989 Spring. hair, Grade 9B9E S pri "g, setting lever Stuff, balance Stem, winding Stud, hairspring Wheel. center and pinIon Wheel, tbird and pinion Wheel, fourth and pinJon Wheel, escape and pinion Wheel, hour Wheel. minute Wbeel. ratchet Wheel. Intersetting Wheel. winding

,'Uateriol

Screw, cllck Screw, winding wheel hub Screw, ratchet wheel Screw. balance lower jewel Screw. dial foot Screw. setting lever Scr.,w, c lutch lever spring Spring, cllck Sllring, c lutch lever Spring, setting cap Spring. hair Staff, balance Stern, winding Stud. hairspring Wheel, center and pinion Wheel, third and pinion Whe.,I, fourth and pinJon Wheel. escape and pinion Wheel, hour Wheel, minuU;! Wheel, intermedIate Wheel, winding Wheel, ratchet

~'aterjaJ

Screw, winding wheel Spring, click Spring, clutch lever Spring. hair, EfinfJar Extra Spring, settin g cap Staff, balance StelO, winding Stud, hairspring Wheel, center and pinion Wheel, tbJrd and pinJon Whee). fourth and pinion Wheel, escape and pinJOD Wheel. bour Whe~I, minute W h .,el. ratchet Wheel. sett·ing Whe.,l. wloding

GRADE 750-751 lUateriol

Arbor, barrel Arhor, pallet B a lance. with screws Balance, (with screws) and staff Balance, complete Barrel Barrel and arbor

Continued on pa~e 30

29

Co •• No.

7419 75 19 7415 2965 7479 7480 7410 6267 6268 6269 6270 6273 6274 6275 6278 2983 7481 7482 741 8 7422 7421 7456 7457 2990A 7429

6229

7433 7414 7458 7558 2963 7484 7492 7493 7486 7488 7491 7495 7494 7400 7493 7420 74 25 7440 6261 7427 7426 6266 7445 7448 7450 7452 7441

6241

Cat. No.

6211 2934 6253 6254 6255 6205 6206 6219 7415 2965 2979A 6280 621 0 6267 6268 6269 6270 6273 6274 6275

30

21/0 SIZE AND 22/0 SIZE MOVEMENTS

.Material

Click, Grade 750 C lick, Grade 751 Clutch Coll e t , hairspring Endlltone Cap, balaoce upper Endstone Cap, balaoce lower Hub, winding wheel J e wel, center upper Jewel , center lower J ewel, third or four th upper Jewel, third o r fourth lower J e wel, escape upper J .,wel, escape lower Jewel , pallet upper o r lower J e we l, balance upper o r lowor J ewel, roller Stone, pallet recelviog Stone. pallet discharging Leve r, clutch Le .. er. setting l\Iainllpring, strength 6}i Pallet and fork Pallet, Cork and a l'bor Pi n, banking Pinion, cannon-Used on applied component dials Pinion, cannon-Used on plain t ransfer di,,", Pinion, escape Pinion, winding R eg ulator, Grade 750 Regulator, Grade 751 Roller, combination. complete Screw, balance Screw, balance upper cap Screw, balance lower cap Screw, bridge or balance cock Screw. click or ratchet wheel Screw, dial foot Screw, hairspring stud Screw, paliet bridge or setting cap spring Screw. setting lever Scr e w. winding wheel h u b S pring. click Sp ri ng. clutch lever Spring, setting cap S pring , hair, ElinfJar Extra Sta ff, balance S t em, winding Stud , hairspring Wheel, cen ter and pinion Wheel, third and pinion W b eel, fourth and pinion Wheel, escape and pinion Wbeel. hOUl'----Used on a pplied component dial!! W h eel, hOUl'----Used o n plain transfer dial.

GRADES

911 911M

~latericl

Arhor, barrel Arbor, pallet Balance. with screwl B.lance (with screws) and Sta ft" Ba lance, complete Barrel Barrel and Arhor C li ck Clutch Collet, hairspring End.tone Cap. balance upper End.tone Cap. ba la.nce lower Hub. winding wheel J e we l, center upper J ewel, center lower J e we l , third or fourth upper J e wel, third or fourth lower Jewel. escape upper Jewel . escape lower J e wel, pallet upper or lower

ALWAYS USE

21/0 SIZE MOVEMENTS

Co •• No. Material

6242 Wheel, minute 74 16 Wheel, settin g 7407 Wheel . ratchet. Grade 750 7507 Wheel, ratchet. Grade 751 7408 W hee l, winding, Grade 750 7508 Wheel. winding. Grade 751

GRADE 995 Caution: The following parts for Grade 995 are

not interchangeable with those in Grade 72 1: 'Vbeel, center and pinion; Wheel, third and pinion ; 'Vheel, fourth and pinion; Wheel. escape and pinion.

Cat. No.

2911 2934 2953A 2954 2955 2905A 2906A 2919 2915 2965 2979 2980 2910 2977 2978 2967 2968 2969 ~970 2972 2973 2974 '2975 2976 2983 298 1 2982 2922 2918 2921 2956 2957A 2929 2933 2914 2958 2963 2984 2992 2990

1Iiaterial

Arbor. barrel Arbor, pallet Balance, with screws Balance (with screws) and Staff Balance, complete Barr el Barrel and Arbor Click Clutch Collet, halrsprlng Endetone Cap, balance upper End.tone Cap. balance lower Hub. winding wheel Jewe l, balance u pper, unset Jewel, balance lower J e wel . center upper J e wel, center lower Jewel, t hird or four th upper J ewel, third lower Jewel, fourth lower J e wel, escape upper J e wd, escape lower J ewel, pallet. upper J e we l , pallet lower Je ... e l . roller S tone, pallet, receiving Ston e, pallet, discharging L., .. e r, setting Level', cluteh Mainspring, Btr. 7 }i Pallet and }<'Ol'k Pallet. Fork and Arhor Pinion, cannon P inion, escape Pinion. winding Hegulator RolI.,r, combination. complete Scr e w, balance Scr e w, balance upper endstone cap Screw. banking

22/0 SIZE MOVEMENTS

Cat. No.

6277

6278

2983 2981 2982 6218 621 7 6222 6221 2956 2957A 2990A 6229 6233 6214 6258 7558 2963 6284 2992 5085 6286 6288

Material

J ewel, balance upper o r lower. dia .. 80. hole 8}i, before No. T31001 J ewel, balance upper or lower. unset. dia. .90. hole 7%.. after No. T 31000 J e wel , roller Ston." pallet, r eceiving Stone, pallet, dl8C.hargiog Leyer . clutch, Grade 91 1 L e .. er. cluteh, Grade 911M Le .. er, setting Mainspring, Btl'. 6}i Pallet and Fork P a ll .,t, Fork and Arbo r Pin. banking Pinion, cannon Pinion. escape Pinion. winding Regulator. Grade 911 Regulator, Grade 911A! Roller, combination, complet-e Scr .. w, balance Screw, balance upper cap Screw. balance lower cap Screw, bridge or balance cock SCr.,w. click

GENUINE HAMILTON

Cat. No.

2986 2987 2994 2996 2995 2988 2998 2997 2993 2790 2900 2989A 2920 2925 2940 2961 2927 2926 2966 2945 2948A 2950 2952 2941A 2942 2916 2908 2907

Caution:

Cat. No.

2955B 2979A 2980A 5010 2977A 2929A 2958A 2998A 5096 2989A 2961A 3266 2945A 294lA 2oo8A 2oo7A

Cat. No.

6291 6295 2994 6288 5096 6300 6298 6220 6225 6240 6239 6261 5027 7427 6226 6266 7445 7448 7450 7452 6241 6242 6216 6207 6208

IUaterial

SCl'ew, balance cock SCl'ew. barrel or train bridge Screw, pallet. b ridge SCl'ew, setting cap spring Screw, hairspring stud Screw, click Screw. winding wheel hub Screw. ratchet wheel Screw. balance lowcr jewel cap Screw. dial foo t Screw, setting lever Scre w. clutch lever spring S pring . click Spring, clutch lever Spring, setting cap S pring, h&lr Staft", balance Stern, winding Stud, hairspring Wh .. .,I, cent-er and pinion W h eel, third and pinion Wheel, fourth and pinion Wh e.,l, escape and p inion Wheel, h our Whe.,l. minute Wheel, Inoormediate Whee l, winding Wh .. el, ratchet

GRADE 995A The following parts for Grade 995A are

not interchangeab le with those in Grade 721 : 'Vheel, center, and pinion; Wheel, third, a nd p inion ; Wheel, fourth, and pinion; Wheel, escape , and pinion.

Mote,jal

Balance. complete End.tone Cap, balance upper Endstone Cap, balance lower Hub, winding wheel Jewel. balance hole, upper or lower Pinion. cannon Regulator Screw, winding wh eel hub Scr .. w, balance lower jewel cap Screw, clutch lever spring Spring, hair. breguet Stud, hairspring Wh ...... I. center and pinion Wheel. hour Whe el . winding Wheel . r atchet All other procurable parts same Q3 Grade 996

~laterial

SCI'C!lW, dial foot Screw, hairspring stud Screw, pallet bridge Screw. ratchet wheel Scr ew. setting cap spring Screw. settIng lever Scre w, winding wheel hub Spring. clJek S pring. clutch lever Spring. setting cap, Grade 911 Spring. setting cap, Grade 91 1A1 Spring. hair, ElfnMr ExIra Staff, balance. before No. T SIOOI Staff. balance. afler No. TSIOOO St .. w., winding Stud, hairspring Wheel, center and pinion Wheel, third and pinion Wh e el. fourth and pinion Whee l, escape and pinion Wheel. hour Wheel, minut-e Wheel. sett.ing Wheel, ratchet Wheel, winding

MATERIAL

TYPE #1 Crown type -# 1 is simple, conventiona.1. The pipe length , the crown thickness, the sha.pe and diameter vary depending on t,be model for which it, was designed.

TYPE #4 Type #4 crown. the Hamilton "stemguard" crown, also employs the "floating sleeve" principle but. with improved design. This type crown is used on all current Hamilton wrist and st,rap models with the exception of Hamilton "c\d" models.

HAMILTON CROWNS

TYPE #2 Type #2 crown Is Series I of the HamlltOD "dust-proor' crown. These crowns feature a. "floating sleeve" construction indicat.ed in the illustration.

TYPE #5 Type # 5 crowns are suitable tor only Series I Hamilton "Cld" models: Brandon. Langdon, Lange. Nordon, Norde and St.eeldon. These crowns are equipped with the female half of the two-piece stem.

TYPE #3 Type #3 crown is Series II of the Hamilton "dust-proof" crown. These crowns feature a semi-floating sleeve controlled by a spring. See JIlustration above.

TYPE # 6 Tyl'6 # 6 crown ill suitable only for Series II Hamilton "cld" models such as Vardon, Beldon, Reardon and "to be announced" models. These crowns are also equipped with the female halt ot tbe two-pIece stem.

Illustrations of crowns are shown enlarged and in stem out position to illustrate detail. Case model names should be referred to in all instances where the model name is known. Current Hamilton watches have the case model name inscribed on the inside of each case back. Please note all crown refill numbers are now discontinued. When ordering Hamilton crowns, it is suggested the following procedure be used:

1. Determine the size of the watch. 2. Determine the type and color of the crown desired. 3. List both crown number and model name, whenever possible. 4. Order the crown by the new crown number.

New Old New Old No. No. Type Color Case Model Name No. No. Type Color Case Model Name

16 SIZE 10 SIZE 20001 ModelA&ll 1 Yellow ModelA&ll 20031 Refill 15 1 Yellow Bascine, Kane

20032 Refill 16 1 Yellow Bruce 20002 Model 2-8-10 1 Yellow RR #2,RR#8,RR#10 20033 Refill 17 1 Yellow Hayes, Earl, Gould, 20003 Model 15 1 White and 20 ~asterpiece, Watt 20004 Model 16 1 Yellow Traffic Special 20005 1773 1 Yellow Mainliner 20034 Refill 18. 1 Yellow Morse, Elton, Bruce,

21 and Shand, Eton 79043

20035 Refill 19 and 1 Yellow Howe, Hardy 12 SIZE 79042

20036 79039 1 White Masterpiece 20016 Refill 1 1 Yellow Carter, Stevens, Marshall 20037 79041 1 Yellow Cole, Blaine, Kane, Dunn 20017 Refill 1 1 White Carter, Stevens, Marshall 20038 79044 1 Yellow Jefferson 20018 Refill 2 1 Yellow Warren, Masterpiece A 20039 79045 1 Yellow Morris 20019 Refill 2 1 White Warren, ~asterpiece A 6/0 SIZE 20020 Refill 3 1 Yellow Bascine, Garfield 20021 Refill 3 1 White Bascine, Garfield 20050 Refill 27 2 Yellow Dixon, Drake, Putnam, 20022 Refill 4 1 Yellow Adams Scott, Webster, Watson, 20023 Refill 4 1 White Adams ~orley, Heyward 20024 Refill 5 1 Green Bascine 20051 Refill 27 2 White Dixon, Drake, Putnam, 20025 Refill 6. 8 1 Yellow Bascine, Lexington, Scott, Webster, Watson,

and 9 Lafayette, Farragut, Morley, Heyward Rittenhouse 20052 Refill 28. 2 Yellow ~ason, Turner, Lawrence

20026 Refill 6. 8 1 White Bascine, Lexington, 29 and 30 and 9 Lafayette 20053 Refill 28. 2 White Mason, Turner, Lawrence,

20027 Refill 7. 10 1 Yellow Cleveland, Decagon 29.80 and Harris 20028 Refill 7. 10 1 White Cleveland, Decagon 5665 20029 Refill 11 1 Yellow Ramsey 20054 Refill 31 1 Yellow Ellsworth, Randolph, 20030 Refill 11 1 White Ramsey Prescott, Winslow

Continued on page 32 31

HAMILTON CROWNS

New No.

20055 20056 20057 20058

Old No. 260-30BA 39-H-4-34L 632 79034

20059 79035 20060 79036

Type

1 2 1 2

2 1

Color White Coral White Yellow

Yellow Yellow

Case Model Name Water-proof Martin Chatelaine Endicott, Medwick, Russell, Martin, Douglas, Roland, Dodson Secometer "A" Vancott

NEW 12/0 & 8/0 SIZES 20061 79027 2 Yellow Eric, Dyson, Neil, Forbes,

20062 20063 20064 20065

79028 79029 79048 79049

3 4 1 4

4 4 4 4 4

Yellow Yellow White Yellow

20066 20067 20068 20069 20070 705

79051 79055 79060 79064 79065 705 5 Series I

White Yellow White Yellow White Yellow

709 712 716

709 712 716

5 Series I White 6 Series II White 6 Series II YeHow

14/0 SIZE 700 700 20101 Refi1l35

5 Series I Yellow 2 Yellow

20102 Refi1l36 2 20103 Refi1l37 2

20104 Refill 38 & 40 1

20105 Refi1l39 20106 79018 20107 79020 20108 79021 20109 79022 20110 79023 20111 79024 20112 79025 20113 79037 20114 79052

20115 79053

1 4 2 1 1 2 1 3 1 4

4

20116 72-14/ 0-99 1 20117 193 1 20118 39-14/ 0-H·34L 2 20119 182 1 20120 195 1

Yellow Yellow

Yellow

Yellow Yellow Yellow White Yellow Yellow Yellow Yellow Yellow Yellow

White

White Coral Coral Coral Coral

18/0 SIZE

Dexter, Darrell, Dewitt Piping Rock, Kirk, Glenn Dunham Chatelaine Piping Rock, Kirk, Neil, Forbes, Darrell, DeWitt, Lambert, Clyde, Boyd, Secometer "B", Seoometer "C" J Todd, Dexter, Gary, Blake, Emery, Carlton, Craig, Fleetwood, Cameron, Stafford, Cranston, Medford, Raleigh, Foster, Ryan, Kennett Raymon, Clinton Spencer Piping Rock Glenn, Todd Glenn, Todd Lange, Norde, Langdon, Nordon Steeldon Vardon Beldon

Brandon Carson, Nelson, Cabot, Seckron, Carlisle, Elliot, Bentley, Brooke, Allison, Linwood, Contour, Bowman, Winthrop, Boulton, Lester, Myron, Ashley, Eaton, Milton, Perry, Norman, Dwight, Dennis, Ross Sherwood Calvin, Dickens, Foster, Rodney Richmond, Lowell, Taylor, Dorsey, Bartley, Pierre, Ardmore, Donavan, Wayne, Boone, Gilman, Cameron Custer Barton Gilbert Cambridge Gordon, Midas. Wesley Donald Brock H ayden Wilshire Wesley, Brock, Grover, Jeffrey, Boulton Brock, Hayden, Keith, Austin, Gordon, Cambridge Lexin~ton WilshIre Ross Brock Midas

20121 Refi1l45 1 Yellow Aurora, Gail, Linden Hall, Millay, Sargent, Wellesley, Berkley, Emily, Marion, Barbara, Bryn-Mawr

32

New No.

20122

20123 20124 20125 20126 20127

Old No.

Refill 45

Refill 46 Refill 46 Refill 47 Refill 47 Refill 48

Type

1

1 1 1 1 1

Color White

Yellow White Yellow White Yellow

Case Model Name Aurora, Gail, Linden Hall, Millay, Sargent, Wellesley, Berkley, Emily. Marion, Barbara, Bryn-Mawr Beatrice, Joan, Devon Beatrice, Joan, Devon Cbevy Chase, Briarclifie Chevy Chase, Briarcliffe Norfolk

20/0-21/0-22/0 SIZES 20128 Refills 49-50-

52·53 & 79005

20129 Refills 49-50-52-53 & 79006

20130 Refi1l51 20131 Refi1l51 20132 79001

20133 79002

20134 79003 20135 79004 20136 79007 20137 79008 20138 79009 20139 79010 20140 79011 20141 79012 20142 79013 20143 79014 20144 79015 20145 79016 20146 79046

20147 79047

20148 79056 20149 79057 20150 3835 20151 2101

20152 2101

20153 2102

20154 210-30-BA 20155 5510

1

1

1 1 1

1

1 1 3 3 3 3 1 1 3 3 3 3 4

4

4 4 1 1

1

1

1 1

Yellow

White

Yellow White Yellow

White

Yellow White Yellow White Yellow White Yellow White Yellow White YeJIow White Yellow

White

Yellow White Coral Yellow

White

Yellow

Yellow Coral

Caroline. Evelyn, Glenwood, Cedarcrest, Quadrille, Rondeau, Paula, Lucille, Audrey, Sylvian, Estine, Alcott, Cynthia, Myrna, Sonya, Fairmount, Mayfield, Anitra, Cordelia, Elsie, Cotillion, Lois, Claire, Marcia, Suzanne, Roberta, Martha, Muriel, Eileen, Doris, Olga, Laura, Gladys, Olivia Caroline, Evelyn, Glenwood, Cedarcrest, Quadrille, Rondeau, Paula, Lucille, Audrey. Sylvian, Estine, Alcott, Cynthia, Myrna, Sonya, Fairmount, Mayfield. Anitra, Cordelia, Elsie, Cotillion, Lois, Claire, Marcia, Suzanne, Roberta, Martha, Muriel, Eileen, Doris, Olga, Laura, Gladys, Olivia Sandra, Elinor, Vilma Sandra, Elinor, Vilma J essica, Myrtle, Joanne C-2, FIr-15, FIr-16, FIr-18, FIr-19, FL-20, FL-21 , Venita, Lana, A-2, A-4, A-G, B-2, B-4, D-2, D-4, Clara Jessica, Myrtle, C-2, Lana A-2, A-4, A-G, A-10, A-14, D-2, D-4, D-G, Clara, B-4, Lady Lancaster, 701-720, 750 thru 753. Emily, Frances, Bernice Emily, Frances, Bernice Judith, Greta Judith, Greta Agnes, Edna Agnes, Edna Susan, Felicia Susan, Felicia Lynn Lynn Sharon, Shirley Sharon, Shirley FL30 to FL39, Trina, Carla, Donna, Sheila, Myra, Carol, Elaine, Alice FL30 to FL39, Trina, Carla, Donna, Sheila, Myra, Carol, Elaine, Alice All models, Grades 750-751 All models, Grades 750-751 Julie, Doris, Olga Sonya, Lady Hamilton, C·2, C-4, C-6, C-10 Sonya, Lady Hamilton, C-2, C-4, C·6, C-10 Elsie, Cotillion, Lois, Claire Langtry, T rilby Susan,Amy

Catil log No.

14 15 15 15

232

317 3 17 } 318 3 17 318 534 534 534 534 534 5348 5348 5348

3028

HAMILTON MAINSPRI GS

Always order Hamilton Mainsprings by Catalog Number and St rength. Usc tbe figure under the ·' .Mill imeter- Strength" column to indicate desired strength on st-eel mainsprings: Oll D ynacar use required strength !lumber and catalog n umber. :Mainsprings identified by two (lifferenl Catalog Num bers may be procured by using e ither number.

STEEL MAINSPRINGS M i llim ete r D e nni eo n

S trclJ g th '\'Ii' idth Le ll gt h I n e ll cit

S ty l e B r a c e

C ata log N o .

1\1illinH; l e r D c nui eon Strengt h Width S tr e n g th

18)f 20 20 M 21 Y2 18

17

IS

19 19 )f 15 15 Y2 16 16 )f 17 15 15 ~

16

17

W idth

18 SIZE MOVEMENTS 3.18 2.87 2.87 2. 87 3.18

4» 3» 3U 27S 5

23 19 19 19 22

16 SIZE MOVEMENTS 2.83

2. 83

2.83 2. 83 2.83 2.83 2.83 2.83 2.83 3.00 3.00 3.00

6

5

4 3j4 7 6 ~ 6 li 6)( 6 7

19

19

19 19 19 19 19 19 19 21 21 21

12 SIZE MOVEMENTS 1.72 8

25J.( 2 1)( 21.\4 21M 25!i

21U

21 Ji

21M 21U 20~

20~

20~

20~

20 ~~ 23}1 23 }1i 23M

M.B. T T T

?LB.

T

T

T T

M. B. l\1.B. :.\['B. M.B. l\LB. M.B. M.B . M.B.

l\LB.

S t rengt h

1721 } 192 1 13 .J.1

2321 12 }4 2521 12 2621 11 ~ 2021 11

7221 7221 722 1

4128

502 1 5021

272 1 2721 2721

8» 9 9»

12 »

11 ll li

8 8)f 9

Width

6/0 SIZE MOVEMENTS 1.34

1.34 1.34 1.34 1.34

8» 9U 9» 9~

10

5

5 5 5 5

8/0 SIZE MOVE~IENTS 1.50 1.50 1.50

12 )f 12 lJ »

5 5 5

12/0 SIZE MOVEMENTS 1.18 9)( 3

14/0 SIZE iVIOVEMENTS 1.30 1.30

10 9%"

.j

4

18/0 SIZE MOVEMENTS 1. 12 1. 12 1.12

13

12 M 12

2 2 2

L ellgt h In c h es

10

lI M 11 ~ lJ )f lJ )f

13 %" 13.% 13 ~i

11.J..1l 11

11» 1O .%" 10)(

Sty le Br llce

'I'

T T 'I' 'I'

M .B. M.B. M.B.

M.B. M .B.

'I' 'I' T

1228

1 1228 3028 1228 3028

1.72 8 2 1.!i: l\1.B. 20/0 AND 21/0 SIZE MOVEMENTS 18 1.72 5 8 21M M.B. 6»

12 (THIN) SIZE MOVEMENTS 2921 2921 2921 2921 292 1 2921 7421 7421 7421 7421

7 7» 8 8 y:! 9 6)( 6» 6~ 7

3328

6021 602 1 0021

1535 1536 1536

16

16 17 18

14 H 14 K 15

1.34 5

10 SIZE MOVEMENTS 1.50 1.50 1.50

6» 6 5

5 5 5

o SIZE MOVEMENTS 1.38 1.38 1.38

7» 7» 7

Ctltn lo~ No. Stren gt h Thic kness

35433 35434 35435

20432 20433 20434

27432 27433 27434 27435

16S GRADES 9501l-992B 3,')0 370 390

.155 ;\1 / 11

.160 -:\1 / l\1

.104 M /l\I

lOS GRADES 917-921-923 160 180 ZOO

.150 :.\1j:'\1

.160 :,\1/ :,\1

.168 l\1/ :.\1

6/0S- ALL GRADES 71 80 90

100

.104 :'\·1 /~1

.109 ~1 / ~1

.117 l\ 1 / ~1

. 1Z3 M O l.

18 )f

17)( 17 J( 17U

1'1.B.

M.B. M .B. 1\-£' B.

M.B. T 'I'

6221 6221 6221

6 6» 7

DYNA V AR MAINSPRINGS

Cutnlog N o. Sl r c ll g th Thic knC1!;s

8/0S GRADES 747-74·8 AND 12/ 0 S GRADES 752-753-754

4-14 31

44432

44433 44434

14432 14433 14434

50 56 03

71

.0815 :.\1 /.:.\ [

.086511 / :,\1

.09 15 :.\1 / ),1

.0970 :.\1 / ),1

1<I/OS ALL GRADES

63 71 80

.100 ~1 / :.\1

.106 )[ /~ l

.113 ),1 / )1

1.00 1.00 1.00 1.00 LOO 1.00 lAO 1..10 lAO lAO

14 » 14 13y:! 13 12 » 12

22/0 SIZE MOVEMENTS 1.40 lA O 1.40

15 14 )f 14

Cata log N o,

5 5 5

S lrCll r:;t h

llli 1O )f

9.%" 9 8» 8 8» 8» 8» 8»

M.B. M.B. M.B. M.B. M.B. M.B. M .B. M.B. l\1.B. :'\1.B.

M.B. 1-.1.B. M.B.

' n,icknc8!S

21/0S GRADES 750-751 4643 1 46432 40·133

26 28 30

.0625 £o l / l\[

.0675 ) l /.M

.07 ;\1 /1'1

21/0S GRA DES 721-995-995A-997 36432 36433 364.34

32·J32 32433 32434

26 2R '0

.07611I j.M

.079 ::'\ L/ M

.082l\ I /.~l

22/0S GRADES 911-91DI 26 28 30

.065 ) 1/ ::.\1 .0675 M / M .07 1Il / M

33

36

MATElHALS CABINET- DYNA V AR MAINSPRI IGS- PML 79 OIL

Dynavar MAINSPRINGS

DYNA VAR mai nsprings, made of the superior alloy developed and manufactured by Hamilton, are the finest watch mainsprings available. Dynavar mainsprings are:

o unbreakable, o rustproof, e anti-magnetic,

o smooth, fridion-free finished on bolh sides and edges,

I) uniformly strong at all normallemperaturcs ,

o equally powerful from full wind to mn down,

o pre-formed to fit Hamil(on walches without adjustment,

o promptly available from Authorized Hamilton ill[ alerials HI holesalers JOT all Hamilton watches except 18 size, 16 size (1vhich preceded grades 9928 and 950B), 12 size, o size and 18 / 0 size.

CSE GENUINE HAMILTO N DYNAVAR ~TA INSPRINGS for all Hamilton mainspring replacements.

- HAMILTON MATERIALS CABINET

The Hamilton Genuine Materials Cabinet is essential equipment fo r every watch repair shop. Ready accessibility of materials from a neatly organized cabinet saves time. It also makes it easier to maintain adequate inventories of essent ial material. Each of the cabinet drawers holds an assortment of labeled bottles containing t he most-needed materials for virtually all Hamilton civilian watches from the original 18 size to the newest 21/ 0 size. A convenient reference chart for staffs and jewels is an integral part of the top drawer of the cabinet. The cabinet measures 1374''' x 1074''' x 3;1", which is the standard size established by the Watch Materials Distributors Association of America. Available t hrough Authorized Hamilton Materials Wholesalers only.

-HAMILTON

PML79 WATCH OIL

~f .:: :. ,"

Here is the oil fine watchmakers have sought for generations! Product of more than ten years' intensive development in the Hamilton Research Laboratories, PML 79 Oi l embodies all of the lasting characteristics essential to continued and accurate performance of fine watches of all sizes. Extensive laboratory, factory and field tests indicate that only Hamilton PML 79 offers all of these essential qualities : (1) excellent lubrication for escape, train and mainspring, (2) high resistance to spreading,- no antispread treatment of bearing surfaces is necessary, (3) high resistance to gumming,- does not gum in the normal interval between servicings, (4) does not evaporate, (5) non-corrosive to metals used in watches, (6) will not affect shellac, (7) remains fluid below freezing temperature, (8) guaranteed uniform quality in every bottle. HAMILTO N PML 79 OIL is available from Authorized Hamilton Materials Wholesalers only.

IMPORTANT PRICES QUOTED IN THIS PRICE LIST DO NOT NECESSARILY APPLY TO MANY MATERIALS FOR VERY

OLD GRADES

Hamilton's traditional policy of making materials available for all

of its standard timepieces is being continued. Unfortunately, contin

uation of the policy does not and can not mean that materials for very old models particularly will

soon return to our materials inventories or that such materials will be available at prices quoted in this list. Inventories of many materials for very old Hamil ton models are depleted. Demand for materials in this classification has dropped sharply-so sharply that it is no longer practical to produce them in economical machine production

lots. Materials which are so

affected will from now on have to be made by manual methods-at costs considerably higher than the

same material mass produced.

A tabulation of these rna terials can

not be offered because it would be accurate only on the day issued. Materials orders for very old models, therefore, will be subject to availability or on a lImaterial

manufacture order" at a" quoted

price subject to your confirmation.

HAMILTON WATCH COMPANY Lancaster, Pennsylvania

: ' SUGGESTED JEWELER AND WATCHMAKER PRICE LIST OF GENUINE HAMILTON WATCH MATERIAL

EFFECTIVE JULY 26, 1953

For For Each .!4 Dz. ~ DI.

Fm 1 DI.

For For Eaeh .!4 DI. ~ Dz.

Fm , DL

~~~~~~~~~~I7.~I~~ol~~I~~II~~~~~~~~~~I~~~~~ ARBORS, Barrel.. . ........... $1.00 $ 2.40 PINIONS, Cannon Pinion and Wheel #5009-6029D........ 2.50

" PaUet... .80 1.95 ., Cannon#425,1248,1929,2529,2729and2929. 1.30 3.50 Winding....... 1.00 2.25 Cannon, All Otherll. .85 1.80 Rat.chetWheel. ....................... 1.10 2.75 11--,,---;:---:---,-------------�--=---------

-,----,-,-----,-,----------------1--,-, ___ 11----1----1---- Center Seoonda.. .85 1.80 BALANCES, With Seren.......... 2.95 Escape. . . ............... 1.05 2.25

::c-:-:-"::-:=~W=;t~h =SO~re=.=.~.="~d=H="=b~. :'-:--'-'-'-'-"--"--"--"-"---'-I--::3~ .. ~'_I_---I---I--- ~:~~:\r~~d . ¥i5i9A : : .85 1. 80 BALANCES COMPLETE, 16 and 18 Size. 7.50 II:::=:-c::-'~-'-'--'-'-=--'-=--'-"--"---'--'-'-'''---'---'---'---'---I --·-::'':_ __ '_,SO_ ------

" "All Otheu ........ .. _, . 6.50 PINS, All.. ............ .30 .55 ----,.-,,------,--,----------------1--1---:-:-:-1---1---11=::-:::::-=-----------1-------~-----BARRELS AND CAPS.. ........... ...... 21..~~ 4.00 II_PL_A_T_".:.' ,_T_h,_"'_t_. _________ -'--____ 1.-.-30- __ "_' ______ _

.. "" With Arbor Fitted.. ;J\J

===~:-c:-_==___::_------------I-_:::-II-_:::--I----I---- POSTS, Auxiliary Minute #5034... .40 .65 1.50 BRIDGES, Setting Wheel.. ............... .30 .55 " Main Hand #5062-5064.. .60

" All Others, Price on Application 11=-=====----------------1---,-------------------'-------''-----------1---1--,-:- ------ REGULATORS.. 1.05 2.8S CAMS.. ................. .30 .55 11------------------1-------------='-:::':'--"--'---'---'-:-'-:-'--:::--"--"-::-;-"---'---'--'--'-'-'--'----1--::- ---- ---- ---- ROLLERS, With Jewel. . . .... .. . .. . . .. . . . . ... .90 CAPS, Intermediate. Settin( Wheel and Regulator. .30.55 " Small, Douhle.. . .. . .. . . .75

2.00 1.60

.. Hainlpring Stud.... ........ ...... .65 1.65 Combination with Jewel.......... .. . . 1.50 " Ratchet..... .95 2.60 11,-:==--=--,--------------1-----------

SCREWS, Regulator.......... .35 .65 1.10 " Regulator-18 Si:w.. .55 1.10

CLICKS... .80 2.00 Motor Hub #213.. .45 .90 All Others. . .35 .55 _so

CLICK AND SPRING, COmp' ................ ". 1.20 II:::===----::-- -----------!--- ----------,.,-,,---,-__ ---'---'-----------1--1--,,---1----1--- SHIPPERS, All.. .80 2.10 CLIP, Winding Arbor .............. .... .45 .90 11-----'-----,----------1--'--'-1---'--'--------====--"-'-""--'--'--'-'-'--'--"--"--"-------'-------1-_::::-1'--::-:::--1----1---- SPRINGS, Click, Yoke and Clutch Lever-Wire. . .30 .45 .55 1.05 CLUTCHES................................... . . .80 2.00 " Click-Flat Steel................................. .45 .85 1.30 2.45

Clutch, Clutch Lever, Setting Lever, FU!taining and COLLETS. ............. .50 1.20 Setting Cap. . .................. ............ .50 1.00 1.85 3.25

CROWNS, Type 1-10,12,16 Sires....... ... 1.00 2.50 $ 4.90 $ 9.20 Shipper Lever, #2425,2525 and 2725 1.00 2.50 4.75

"Typel-6/0,14/0,S/0.12/0Sizea.... .75 1.90 3.60 6.80 Hair, Brequet, Steel... ............ 1.20 3.10 Type 1-18/0, 20/0, 21/0, 22/0SiJea. .55 1.50 2.S5 5.20 Hair. Elinvar, Extra................... 1.55 4.00 TypeZ-AlISizea......... .80 2.15 4.05 7.60 Types 3 and 4-All Sizea... .70 1.80 3.40 6.50 Main, CommercialQua1ity.. .45 1.10 2.00 3.85

,----'-'-----------------1--------------- 16SDynavar. .....................•. 1.15 3.20 6.20 12.00 DIALS. 16 Size Me1am.ine. . .......... . ... 4.00 10.00 IOSDynavar............................. 1.00 2.70 5.20 10.00

" Metal, B. F................................... . ..... 1.50 3.75 All Other Dynavar. .60 1.65 3.10 6.00 Metal Applied Gold Numeral or Marker-Pocket Watches 5.90 11--,,--=----,-----'-------------1---1----1---Metal Applied Gold Numerals or Marker, All Others 4.40 Regulator. . . . . . . . . . .. ... . . . ... .• . . .. . 1. 20 LuminOWl ...... 2.75 6.90 Regulator with Screw.. 1.55 Secometer Bit. .65 1.65

Shipper #49.. .......... . .. .25 HANDS, Hour and Minute (Pr.)................ .50 LOS 1.90 Shipper #416 ....................... .... .90

" H&M, LwninoWl or Double Hour (Pr.). .70 1.90 Second...... ............. .25 .60 1.10 Mioute Wheel #5012.. 1.35 Sweep Second. . . . . . . . . . . . . . . . . . . . .50 1.05 1.90 Stabilizer #2538.. .35

HOOKll .55 1.30 STAFFS, Balantl).... .55

HUBS, Motor Barrel.. l.tO 2.70 STAFF, Fiflh,CompletewithWheel #7303. .80 " Wl.Ilding Wheel ..... .

Elinvar Balance Staff .

INDEXES .................. .

JEWELS, Balance, Escape and Pallet, Olive Hole .... " Balance Endatones, Gilt or Nickel Setting ..

Balance Endatone, Gold or Steel. Barrel, Gilt Setting. Barrel, Gold Setting.

Center, Gilt Setting .. . Center, Gold Setting ............. . Center, Uoset ......................... . ..•

PIa~, Gilt Setting .. . Plate, Gold Setting ... . Plate and Pallet, Unset.

.55 1.30

.55 1.30 STEMS, Caae and Oversire Winding.. 1.00

.70 " Winding............... .55

.55 1.45 2.60 4.90 STRAPS, Regulator with AdjWltiog Screw #6099. .70

:~ L~~ STV,OS, ~=ing.. . ............................. :~ 1. .. 2.25 WASHERS, Winding "'"heel Hub and Hour Wheel. .30

1.00 WHEELS, Center Second............... .75 1.65

.80 WHEELS, Center Staft: and Pinion, Gilt. 1.90 .. Center Staft: and Pinioo, Gold......... ........ 2.50

.85 2.00 Center Staff and Pinion, Sweep Second #2677. 2.10 1.25

.65 1.10 Fourth and Third. with Pinion, Gilt... 1.50 Fourth and Third with Pinion, Gold. . 2.25

Plate, Cap, Gilt Setting.. ........ . ....•. .40.80 Plate, Cap, Gold Setting....... .80 1.90 Escape................................. 1.10 PJ.at.e, Cap, Gold Cap Setting... 1.10 Escape and Pinion............ 2.20

PalldStones. .70 1.60 Hour #5090............. 2.40 Roller. .50 LOS 1.85 3.2Q Minute #5035a.nd #rot3 ... 2.00

==:-:::-:--:--:-:-c--,-,:-:------I-,--,,- ------ "i .. " #333,2742,2942 .. d 3070... .......... .OS LE~, ~~~te~~.~: .~~.l.l. ~~~. ~~~~:. 2:n 1.75 All Other Hour, Minute Setting and Inte~tting. .40

;;::;;:;:--;-; ____ -::--'-=-'--'-;--'---'--'---'-'------'----1--:::-; ------ Ratchet. ..... .... .... ...... ... .... ... .70 NUTS, Motor Barrel Arbor... .65 1.45 Ratchet. Exposed.. 1.50

.. Motor Hub............... 1.10 Release Stud.. .50 1.35 Winding #38 and #39 .40 Regulator. .... ... ...... ........... ... .... ... . •. .40 .80 Winding Exposed #3130.... 3.35

.35 2.40

3.SO .55

1.50

2.15

2.25 1.00

lAO

.60 1.95

.<5

1.70

1.00

.SO

4.70

2.65 4.9,

I.SO 3.40

1.10

;:-;:-;-;;;:O'-.:;;::-;:::;:::::___:----------'-----I--::c::_ ------------ Winding Exposed, All Dthel'll. 1.30 PALLETS AND FORKS. ............ 2.80 11==::::---'-===-==--=--'---'-'-'---'--'-'-'--'-'----'-1---"-'-'-1---11---1--::cc==-==~=--,-:==-------+-:-:.,- --------- YOKES. .60 PALLETS, FORKS AND ARBORS. 3.50 II"M"A=T=ER=-':-A-=',-C=A"B"'''N=ET=-. -----------·1-,87".",,-1----1·---1--

Above prices apply where specified quantities of one factory number are ordered. Mainsprings may be assorted as to strength. balance staffs as to pivot diameter, jewels as to hole size. Items purchased in g,ross lots, consisting of not less than one dozen of a number are subject to an additional 10% discount. Items purchased in one-quarter g,ross lots, consisting of not less than one dozen of a number are subject to an additional 5% discount.

2-179U ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE

"Cld" MATERIAL

F" F" F" E.oh ~DII. ~ DI. 1 DL

------Crown-Stem Al!sembly . ........ $1.10 $3.15

Crystal and Gasket, Pkg .. .. 1.10 2.65

Gasket (only), Pkg .. .. $ .30 $ .50

Key-Stem ......... . .35 .00 1.50 2.00

Rellector Riog, Steel and Gold·Filled .. 1.00 2.50 .. Gold •......•.......• 2.60

HAMILTON MAINSPRINGS

Always order Hamilton Mainsprings by Catalog Number and Strength. Use the figure under the "MUllmeter-Strength" column to indIcate desired strength on steel maln~ springs; on Dvnatlar use required strength number and catalog number. Mainsprings identifl.ed by two different Catalog Numbers ma.y be procured by using either number.

STEEL MAINSPRINGS MilliDleter DeODilloD Catalog Milli:rneter Denni.on

No. Strength Width Strength Width Length Inohe.

Style Brace No. Stl'ength Width Stl'f!!ngth Width

I. 15 15 15

232

317 317 } 31S 317 31S 534 53. 53. 53' 53' 534B 534B 534B

3028

IS;" 20 20;" 21;" 18

17

18

19 19;" 15 15;" 16 16;" 17 15 15;" 16

17

18 SIZE MOVEMENTS 3.18 2.87 2.87 2.87 3.18

4;" 3;" 3Ji 2;" 5

23 19 19 19 22

16 SIZE MOVEMENTS 2.83

2.83

2.83 2.83 2.83 2.83 2.83 2.83 2.83 3.00 3.00 3.00

6

5

4 3,. 7 6,. 6;" 6Ji 6 7 6,. 6;"

19

19

19 19 I. 19 19 19 19 21 21 21

12 SIZE MOVEMENTS 1.72 6 8

25U 21Ji 21~

21U 25M

21U

21 J4'

21U 21.!4 20,. 20~

20~ 20~

20~ 23;" 23;" 23;"

M.B. T T T

M.R

T

T

T T

M.D. M.B. M.B. M.B. M.D. M.B. M.B. M.B.

M.B.

1721 } 13;" 1921 2321 12M 2521 12 2621 11.!1 2621 11

7221 7221 7221

4128

5021 5021

2721 2721 2721

8;" 9 9~

12;"

11 11;"

8 8;"

•

6/0 SIZE MOVEMENTS 1.34

1.34 1.34 1.34 1.34

8;"

9Ji 9;" 9,.

10

5

5 5 5 5

8/0 SIZE MOVEMENTS 1.50 1.50 1.50

12;" 12 11;"

5 5 5

12/0 SIZE MOVEMENTS 1.18 9Ji 3

14/0 SIZE MOVEMENTS 1.30 1.30

10 9~

4 4

18/0 SIZE MOVEMENTS 1.12 1.12 1.12

13 12;" 12

2 2 2

Length Iache.

10

11;" 11;" 11;" 11;"

13,. 13,. 13,.

14;"

11;" 11

11;" 10,. IOJi

Style Brace

T

T T T T

M.B. M.B. M.B.

M.B.

M.B. M.B.

T T T 122S1

1228 3028 1228 3028

17 ;" 1.72 5;" 8

21Ji

21Ji M.B. 20/0 AND 21/0 SIZE MOVEMENTS 18 1.72 5 8 21J4' M.B.

12 (THIN) SIZE MOVEMENTS 2921 2921 2921 2921 2921 2921 7421 7421 7421 7421

6;" 7 7;" S 8;" 9 6Ji 6;" 6,. 7

3328

6021 6021 6021

1535 1536 1536

16

16 17 18

14;" 14;" 15

1.34 6;" 5

10 SIZE MOVEMENTS 1.50 1.50 1.50

6;" 6 6

5 5 5

o SIZE MOVEMENTS 1.38 1.38 1.38

7;" 7;" 7

Catalog No. Strength Thiekne ••

35433 35434 35435

20432 20433 20434

27432 27433 27434 27435

16S GRADES 950B-992B 350 370 390

.155 M/M

.160 M/M

.164 M/M

lOS GRADES 917-921-923 160 ISO 200

.150M/M

.160 M/M

.168 M/M

6/0S-ALL GRADES 7l 80 90

100

.104 M/M

.109 M/M

.117 M/M

.123 M/M

18;"

17 X-17 J4' 17 J4'

14 14l{

I',.

M.B.

M.B. M.B. M.B.

M .B. T T

6221 6221 6221

6 6;" 7

DYNAV AR MAINSPRINGS Catalog No. Strength Thiekne~lIt

8/0S GRADES 747-748 AND 12/0S GRADES 752-753-754

44431 44432

44433 44434

14432

14433 14434

50 56 63 7l

.0815 M/M

.0865 M/M

.0915 M/M

.0970M/M

14/0S ALL GRADES

63 7l SO

.100 M/M

.106 M/M

.113 M/M

1.00 1.00 1.00 1.00 1.00 1.00 lAO 1.40 lAO lAO

14;" 14 13M 13 12 ;" 12

1

1 1 1

22/0 SIZE MOVEMENTS 1.40 lAO lAO

15 14;" 14

Catalog No.

5 5 5

Strength

II;" 10;" 9,. 9 8;" S S;" 8~ 8;" S;"

8Ji 7,. 7Ji

M.B. M.B. M.B. M.B. M.B. M.D. M.B. M.B. M.B. M.B.

M.B. M.B. M.B.

Thieknea.

21/0S GRADES 750-751 46431 46432 46433

26 2S 30

.0625 M/M

.0675 M/)":I

.07 M/M

21/0S GRADES 721-995-995A-997 36432 36433 36434

32432 32433 32434

26 2S 30

.076 M/M

.079 M/M

.082 M/':\1

22/0S GRADES 911-911:\1 26 2S 30

.065 ::\I/M .0675 l\f/M .07 l\l/M

Effective July 26, 1953

SUGGESTED JEWELER AND WATCHMAKER PRICE LIST OF GENUINE ILLINOIS WATCH MATERIAL

This price list applies to parts for Illinois watch movements manufactured in Springfield, Illinois and Lancaster, Pennsylvania. Your Authorized Hamilton Materials Wholesaler will supply parts prices for imported Illinois movements.

For For For For Each 7i Dr. M DI.

F" 1 DI. Each ~ Dr;. 7i Dz..

F" 1 D,.

11.00 ' 2.40 LEVERS, Clutch, Locking, Setting. .75 1.75 .50 1.05 11:-::=-=-....,---,:--,--:---'---.------]-- -------- -

l:gg ~ :~~ II;:N~U~T~S,~"':;;:'~"'~,~"'~,;:A~dj~·";:,(~i"~g~S-"-.-.-. ·_· ______ --'-__ 1--:-~·4:_0 __ "_' ____ __ _

ARBORS, DarreL .... " Clutch ..

Pallet .. . Winding .......... .

.. Threaded. .55 1.00 '1.80 '3.40 PALLETS AND FORKS. 2.80 --]]=:=:=-==-==:-==,-------]-"'...,,- ------ -

BALANCES, With Seren .. 2.95 PALLETS, FORKS AND ARBORS.. 3.50 --]]==-:-,,-----=..,,----------]--------

BALANCE COMPLETE, 168 Non·Magn('lie.. 7.50 PINIONS, Cannon or Winding .. .85 J.80 .. .. All Othel"3. 6 .50 .. E8capeor Fifth. 1.05 225

=-=--:::-:---:-::--:---_______ ]---:::- ______ II=-:::-,=,-,,--,=-c=,-,=-c:.:.:.:.c=,-,=-c:.:.:.:.cl~ ----__ BAR., Slid" and Swing...... .35 .70 PINS, All. .30 .55

" Swing with Pinion.. .75 1.80 II=:-c==-= __ ----------------]-- ---------::-:-;::c;;:-"-::::-;;:c;:-------------I--:--::: --------- PLATES, Setting. . .. ............. .30 .85 BAR;!tE}, A~D C¥, 'wfti; Arb~r' Fitl~d·.·· i:1g II R=E~G;:U~L~A=.1'~O;:RS;:'-.. -. -.. -.-.. -.-.. ------'------I--:-I.~O:-5 --,-,-,- ------=B=E"'A=R='N=G=S=,"'M=,-(-,,"'B=.-,,-,=IS=(-,'=,"'U=p-p-,,-.-. -------]--.~'~6-]---:-1.=(=5- ROLLERS With J"wel... .110

.. Winding Arbor .. .35 .70 " Small Double ........... .75 '.00 1.60

==:::::-::::--:::-"--------------1---::-1-:-::- ------- Combination with Jewel.. 1.50 BRIDGES, Winding.... . .... .... .55 1.15 II==::::::-::-'--:'-__ ----""-'-'-'-'-'-'--'---'--+--'-.c.:.. --------

" Windini with Pinion. 1.10 2.70 SCREWS, Regulator.. ................ .35 .65 -=-=-,..,--::--'-=---,c-=--:--:==c--:----- - ]-,--::_ ------------ " All Others.. .35 .55 CAPS, Motor Barrel Ratchet Wh!!(!1 with Jewel. 1.95 4 .65 ]]::===-=,,-==--,---------------].-- -------- .-=='::' =cA~1l~O~(~b,~~~.-'~-------------------------I---:·%:c il __ ~'~6=5-1------1------II.s~L~E::E~V~E~,~W~i~"d~i~"g~A,-OO~,~.~.--:=_:_==~_=:---~~-1.--·~50~ ---1.-0-5-----------CLICKS.......... .80 2.00 SPRINGS, Flat St~l Click, Clutch, Lilting, Lock Lever, Setting

" No. 1044. 1.20 Lever, Interwinding Wheel. yoke................ .45 ====----------------]--.~S:-O --z:ro- ------ Wire-Click, Clutch, Locking LeYcr, Flfth Pinion, Set·

. 85

CLlYfCH ES .. . ........ . , . ~ ting Lever, Yoke.. .30 -~---;~~-------------I~:cl-~

Hair, Steel.. . . ... ... 1.20

.45

3.10 .50 COLLETS .. 1.20 ... ............... :. Hair, Elinvar Ext.ra. ............. . 1.55

CUPS, Barrel Arbor.

DIALS. Meta.J Plain. " Etched ..................... ..

Applied Gold Numerals (Wri.!t) ... . Applied Gold Numeral (Pocket).

FORKS.

HANDS, Hour and Minute (Pt.) . .............. . " HoiM, Luminoull or Double Hour (Pr.).

Second, All ..

HUDS, Motor Burel Ratehet or Snailed .. " Winding Wheel..

IN DEXES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I JEWELS, Balance, &cape or Pallet, Olivc Hole ...

" Endstone, Gold SeUing. Endskme, Gold Fi~e 8 or Dome Setting . Endstone, Comp<mtioD Setting .... ..... '. . .... .. . .

Barrel, Gold Setting . . ..... . Bam!, Compollition Setting . Center, Gold Setting ......... . Center, Composition Sl5tting ..

1.50 '.00 '.00 S.35 ...

.50

.70

.25

1.05 .55

.70

" .80 . .. "

2.25 1.60 1.% 1.10 1.00

l.lti

3. 75

1.00 l. OS 1.90 UO

.W 1.10

2.40 1.30

Uti 2.60 4 .90 U5 Ul5 1.00

Lock Lever and Setting Wheel Cap Combined.

Main, 6O·Hour .. All Othel'8 ..

Regulator (No. 2042 .or No. 886). Regulator with Screw ..

STAFF, Balanee ...

STHAPS, Regulator with Adjw;ting Screws.

STUDS, Hairl!pring ..

WASHERS, Main Winding Whe(l18ub .

WHEELS, Center Staff and Pinion, Gilt .... . " Center Staff and Pinion, Gold .. .

Clutch ..

""",,. Escape and Pinion ..

Fourth and Third with Pinion-Gilt .. Fourth and Third with Pinion- Gold ..... . .. . ... .. . Hour. Minute, Setting, IntcrSCUing and Intcrwinding.

Center, Ull!et. . .... ............... • --,---,--..,..-,-------] ___ :c:- --- - -- - -- fukh,' .... . ..... .

Pbte, Gold Setting. . .. . . . . . 1.26 Ratchet, EXpoI!ed. Plate, Composition Setting . .85 Regulawr Index ......... . Plate, Unoot.... .. .65 \.45 I " Winding ............... . Pallet Stom~8. . .45 . go

=_--,-_""_"_"_. _______________ ]_"'.",-~ ------ YO~With' i~te~~~di'~g Wbeei.·· LET DOWNS. ....... . .. .. ..... ... . .50 UO

.60

50 .45

.75 1.55

.55

70

.40

.30

1.90 2."

.35

1.10 2.15

1.50 2.25

.40

.70 I.,.

.40 1.30

.60

.95

4.00

1.05

l.15 1.10

1.10

1.50

1.40

.60

.55

.70

1.00

.SO

2.2.5

• 1.30

.55 ----------------

2.10 S 4.00 '.00 3.85

------

------2.65 ..'i5

------

1.10 ------

1.00 ------

Above prices apply where specified quantities of one factory number are ordered. Mainsprings may be assorted 3S to strength, balance staft's as to pivot diameter, jewels as to hole size. Items purchased in gross lots, consisting of not less than one dozen of a number are subject to an additional 10% discount. Items purchased in one~quarter gross lots, consisting of not less than one dozen of a number are subject to an additional 5% discount.

6-10041A

IT PAYS TO USE

ILLINOIS WATCH MATERIAL DEPARTMENT Lancaster, Pa.

ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE

GENUINE ILLINOIS WATCH MATERIAL

ILLINOIS WATCH MAINSPRING CHART Lancaster, Penna., Revised September 15, 1947

-Millimeter Dennison Cabinet

Model New Size Old Length Style Compart- Remarks Number Number Thickness \ Width Thickness I Width Inches Brace ment No. Numbers

47301 18 53 .20 2.93 3)1 20 21)1 T 47302 18 S3 .21 2.93 3 20 21)1 T 1st to 6th 47303 18 S3 .22 2.93 2 20 21)1 T 193

- 47309 I 16 I 1759 I .15)1 I 3.00 I 6)-4 I 21 I 27 I M. Bbl. I I 13th, 14th, 15th I All 60 Hour

47313 16 S73 .17 2.70 6 18 20)1 Double C-- 47314 16 S73 .18 2.70 S 18 20)1 Double

f Small Barrel

c, 47315 16 573 .18)1 2.70 4)1 18 20)1 Double 4th to 9th .744' Tooth 47316 16 573 .19 2.70 4 18 20)1 Double 196 Diameter 47317 16 573 .20 2.70 3)1 18 20)1 Double 197

47320 16 1770 .17 2.70 6 18 22)1 Double

f Large Barrel

47321 16 1770 .18 2.70 5 18 22)1 Double 199 6th to 9th .762" Tooth 47322 16 1770 .18)1 2.70 4)1 18 22)1 Double 198 Diameter

47326 16 1954 .17 2.70 6 18 22)1 M. Bbl. 200 } For AU Bunn

11th and 12th Special M. BbL 47327 16 1954 .17)1 2.70 5)1 18 22)1 M.Bbl. 200 Watche:s Except

60 Hour

47330

I 16

Extra 1952 .17 2.70 6 18 22)1 M. Bbl. } Sangamo Thin 10th Extra Special 47331 16 Thin 1952 .17)1 2.70 5)1 18 22)1 M. Bbl.

47333 16 124 .20 2.90 3)1 20 20)1 T I 195 4th and 5th Thick Barrel .150"

47334 14 & 16 365 .21 2.50 3 16 20 T 194 1st to 3rd Thin Barrel .138-'"

47336 12 & 13 Extra

1845 .16 1.34 6)1 5 18)1 M. Bbl. 204

f Thin

47337 12 & 13 Extra

1845 .17 1.34 6 5 18)1 M. Bbl. ist to 3rd Motor Barrel Thin

47338 12 & 13 Extrn

1845 .18 1.34 5 5 18)1 M. Bbl. Thin

47342 12 1236 .16 1.99 6)1 11 18)1 Double 47343 12 1236 .17 1.99 6 11 18)1 Double 202 1st to 4th 47344 12 1236 .18 1.99 5 11 18)1 Double 201

47349 12 1953 .15 1.99 7 11 18)1 M. Bbl. 203 5th and 6th } Motor Barrel 47350 12 1953 .16 1.99 6% 11 18)1 M. Bbl.

47353 4&6 171 .16 1 77 6)1 9 14 T 205 1st 47354 4&6 171 .17 1 77 6 9 14 T

47355 8 311 .18 1 77 5 9 17 T 1st and 2nd

47357 0&3/0 981 .12)1 I. 70 9)i 8 13 T 1st to 4th and 47358 0&3/0 981 .13 I. 70 9 8 13 T Improved 4th 47359 0&3/0 981 .13)1 I. 70 8)1 8 13 T 206

47363 6/0 O. F. 1422 .12)1 1.18 9)i 3 10)1 Double 207

f - 47364 6/0 O. F. 1422 .13 1.18 9 3 10)1 Double 1st to 3rd Open Face 47365 6/0 O. F. 1422 .14 1.18 8 3 10)1 Double 208

- 47370

I 6/0 Htg.

I 1095 .11 1.41 10 5 12)1 Double I} ( 47371 6/0 Htg. 1095 .11)1 1.41 9~ 5 12)1 Double

4th to 6th Hunting

47376

I 12/0

I 358 .12

I 1 18

I 9)1 3 14)1 Double

1st I

, 47377 12/0 358 .12% 1 18 9)i 3 14)1 Double , , 47380 I 18/0 I 2092 I .10 I 1.20 I 11 I 3 I 12 I Tongue I I 1st I Hook in Barrel

, 47383 18/0 2092 .09 1.20 12 3 10 Double 1st to 5th , 47384 18/0 2092 .09)1 1.20 11)1 3 10 Double

5th 15 Jewels , 47385 18/0 2092 .10 1.20 11 3 10 Double

47387

I 21/0 ..

I .08

I 1.02 13 1

I 83/10 Double

I I ,

47388 21/0 .08)i 1.02 12)-4 1 83/10 Double 1st ... . , 47389 21/0 .08)1 1.02 12)1 1 83/10 Double , .... ,

Please order by the new numbers to insure prompt and accurate filling of your orders. For instance "6 dozen No. 47301." Each spring packed in a glassine envelope at the factory. These envelopes show the above dimensions.

(over)

Documents

HAMILTON W ATe H - Welcome to the NAWCC!...The convenient steel Hamilton Materials Cabinet, together with descriptive comment on Dynavar Mainsprings and information on PML 79 Oil (the