20
It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved. Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. HG724_48 Cat Appliqué 3.72 X 3.86 in. 94.49 X 98.04 mm 10,423 St. HG725_48 Bat Appliqué 3.78 X 4.06 in. 96.01 X 103.12 mm 11,620 St. HG726_48 Owl Appliqué 3.81 X 3.93 in. 96.77 X 99.82 mm 13,505 St. R HG727_48 Witch Appliqué 4.01 X 4.05 in. 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54 X 96.52 mm 9,474 St. HG730_48 Ghost Appliqué 3.89 X 3.92 in. 98.81 X 99.57 mm 8,136 St. HG731_48 Night Owl Appliqué 2.96 X 3.41 in. 75.18 X 86.61 mm 5,158 St. R HG732_48 Little Bat Appliqué 3.38 X 1.91 in. 85.85 X 48.51 mm 3,961 St. HG733_48 Little Spider Appliqué 3.04 X 3.50 in. 77.22 X 88.90 mm 4,246 St. HG734_48 Lil’ Pumpkin Appliqué 3.04 X 2.64 in. 77.22 X 67.06 mm 4,872 St. R HG735_48 Little Ghost Appliqué 2.82 X 3.14 in. 71.63 X 79.76 mm 2,813 St. HALLOWEEN TREATS Pack 12357 • 24 Designs

Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.

HG724_48 Cat Appliqué3.72 X 3.86 in.

94.49 X 98.04 mm10,423 St.

HG725_48 Bat Appliqué3.78 X 4.06 in.

96.01 X 103.12 mm11,620 St.

HG726_48 Owl Appliqué3.81 X 3.93 in.

96.77 X 99.82 mm13,505 St. R

HG727_48 Witch Appliqué4.01 X 4.05 in.

101.85 X 102.87 mm11,117 St. R

HG728_48 Spider Appliqué3.76 X 3.78 in.

95.50 X 96.01 mm10,775 St. R

HG729_48 Jack-O-Lantern Appliqué

3.84 X 3.80 in.97.54 X 96.52 mm

9,474 St.

HG730_48 Ghost Appliqué3.89 X 3.92 in.

98.81 X 99.57 mm8,136 St.

HG731_48 Night Owl Appliqué2.96 X 3.41 in.

75.18 X 86.61 mm5,158 St. R

HG732_48 Little Bat Appliqué3.38 X 1.91 in.

85.85 X 48.51 mm3,961 St.

HG733_48 Little Spider Appliqué3.04 X 3.50 in.

77.22 X 88.90 mm4,246 St.

HG734_48 Lil’ Pumpkin Appliqué3.04 X 2.64 in.

77.22 X 67.06 mm4,872 St. R

HG735_48 Little Ghost Appliqué2.82 X 3.14 in.

71.63 X 79.76 mm2,813 St.

Halloween TreaTsPack 12357 • 24 Designs

Page 2: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.

HG736_48 Little Jack-O-Lantern Appliqué

2.47 X 2.82 in.62.74 X 71.63 mm

4,174 St. R

HG737_48 Corner Spider Web3.04 X 2.84 in.

77.22 X 72.14 mm1,816 St. R

HG738_48 Jack-O-Lantern Face Appliqué

3.93 X 4.09 in.99.82 X 103.89 mm

7,188 St.

HG739_48 Mini Ghost1.70 X 1.55 in.

43.18 X 39.37 mm2,326 St.

HG740_48 Mini Halloween Border1.01 X 5.00 in.

25.65 X 127.00 mm5,025 St. S

HG741_48 Ghoulfriend Appliqué2.61 X 3.01 in.

66.29 X 76.45 mm3,331 St. R

HG742_48 Boofriend Appliqué2.51 X 3.05 in.

63.75 X 77.47 mm3,067 St. R

HG743_48 Boo! Appliqué2.41 X 3.58 in.

61.21 X 90.93 mm6,746 St.

HG744_48 Jack & Cat Appliqué4.62 X 5.17 in.

117.35 X 131.32 mm12,125 St. R L

HG745_48 Skull & Bones Appliqué3.81 X 3.82 in.

96.77 X 97.03 mm6,013 St.

HG746_48 Halloween Corner Appliqué

4.39 X 5.44 in.111.51 X 138.18 mm

18,052 St. R L

HG747_48 Trick-Or-Treat Appliqué4.88 X 5.81 in.

123.95 X 147.57 mm18,621 St. R L

Halloween TreaTsPack 12357 • 24 Designs

Page 3: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Listings below indicate color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads.

HG724_48 Cat Appliquén 1. Purple Background Placement Stitch .........3040n 2. Purple Background Cut Line & Tackdown ..3040n 3. Light Purple Swirls........................................3040n 4. Yellow Background Placement Stitch..........0221n 5. Yellow Background Cut Line & Tackdown ..0221n 6. Light Yellow Stars .........................................0221n 7. Black Cat Placement Stitch .........................0142n 8. Black Cat Cut Line & Tackdown ..................0142n 9. Black Cat Face Details .................................0142n 10. Cat Cover Stitch ...........................................0108n 11. Orange Cover Stitch ....................................0800n 12. Face Details & Cover Stitch Line Details ....0670

HG725_48 Bat Appliquén 1. Yellow Background Placement Stitch..........0221n 2. Yellow Background Cut Line & Tackdown ..0221n 3. Yellow Swirls Background ............................0221n 4. Cloud Placement Stitch ...............................0108n 5. Cloud Cut Line & Tackdown ........................0108n 6. Bat Placement Stitch ....................................0108n 7. Bat Cut Line & Tackdown .............................0108n 8. Bat & Clouds Cover Stitch ...........................0108n 9. Orange Cover Stitch ....................................1200n 10. Teeth & Cover Stitch Line Details ................0670

HG726_48 Owl Appliquén 1. Purple Background Placement Stitch .........3040n 2. Purple Background Cut Line & Tackdown ..3040n 3. Purple Swirls .................................................3040n 4. Black Tree Placement Stitch ........................0108n 5. Black Tree Cut Line & Tackdown.................0108n 6. Yellow Wings Placement Stitch ...................1200n 7. Yellow Wings Cut Line & Tackdown ............1200n 8. Orange Owl Placement Stitch .....................1200n 9. Orange Owl Cut Line & Tackdown ..............1200n 10. Owl Orange Cover Stitch & Details .............1200n 11. Eyes ..............................................................0670n 12. Tree Branch & Eyes .....................................0020n 13. Grey Cover Stitch .........................................0108n 14. Cover Stitch Line Details ..............................0670

HG727_48 Witch Appliquén 1. Orange Background Placement Stitch ........0800n 2. Orange Background Cut Line & Tackdown ...........................................0800n 3. Orange Swirls ...............................................0800n 4. Green Witch Face Placement Stitch ...........0108n 5. Green Witch Face Cut Line & Tackdown ....0108n 6. Purple Hat Placement Stitch ........................0108n 7. Purple Hat Cut Line & Tackdown.................0108n 8. Yellow Hat Buckle Placement Stitch............0108n 9. Yellow Hat Buckle Cut Line & Tackdown ....0108n 10. Hat, Buckle, & Face Cover Stitches & Details ................................................0108n 11. Hat & Face Cover Stitch Line Details ..........0670n 12. Face Details & Hair ......................................0020n 13. Yellow Cover Stitch ......................................0221n 14. Cover Stitch Line Details ..............................0670

HG728_48 Spider Appliquén 1. Green Background Placement Stitch ..........0108n 2. Green Background Cut Line & Tackdown ...0108n 3. Purple Spider Placement Stitch ...................0108n 4. Purple Spider Cut Line & Tackdown ............0108n 5. Green Background Swirls ............................5912n 6. Face Details & Cobweb ...............................0020n 7. Spider Cover Stitch ......................................0108n 8. Black Cover Stitch ........................................0020n 9. Cover Stitch Line Details ..............................0670

HG729_48 Jack-O-Lantern Appliquén 1. Purple Background Placement Stitch .........3040n 2. Purple Background Cut Line & Tackdown ..3040n 3. Background Swirls .......................................3040n 4. Green Stem Placement Stitch .....................0800n 5. Green Stem Cut Line & Tackdown ..............0800n 6. Orange Pumpkin Placement Stitch .............0800n 7. Orange Pumpkin Cut Line & Tackdown ......0800n 8. Yellow Pumpkin Details ................................0800n 9. Eyes & Mouth ...............................................0020n 10. Orange Cover Stitch ....................................1200n 11. Grey Cover Stitch .........................................0108n 12. White Cover Stitch Line Details ...................0670

HG730_48 Ghost Appliquén 1. Purple Background Placement Stitch .........3040n 2. Purple Background Cut Line & Tackdown ..3040n 3. Purple Background Swirls............................3040n 4. Yellow Moon Placement Stitch ....................0221n 5. Yellow Moon Cut Line & Tackdown .............0221n 6. Moon Cover Stitch........................................0221n 7. Ghost Placement Stitch ...............................0108n 8. Ghost Cut Line & Tackdown ........................0108n 9. Face Details ..................................................0020n 10. Ghost Details ................................................0142n 11. Ghost Cover Stitch .......................................0108n 12. Black Cover Stitch ........................................0020n 13. White Cover Stitch Line Details ...................0670

HG731_48 Night Owl Appliquén 1. Purple Owl Placement Stitch .......................3040n 2. Purple Owl Cut Line & Tackdown ................3040n 3. Stars & Owl Feather Linework .....................3040n 4. Grey Owl Cover Stitch & Branch .................0108n 5. Wings & Feet ................................................0020n 6. White Eyes, Wing Linework, & Owl Cover Stitch Line Details ...............0670n 7. Eyes ..............................................................0020n 8. Words ...........................................................0142

HG732_48 Little Bat Appliquén 1. Bat Placement Stitch ....................................0108n 2. Bat Cut Line & Tackdown .............................0108n 3. Bat Cover Stitch & Linework ........................0108n 4. Teeth & Cover Stitch Line Details ................0670

HG733_48 Little Spider Appliquén 1. Purple Spider Placement Stitch ...................0108n 2. Purple Spider Cut Line & Tackdown ............0108n 3. Face Details & Web .....................................0020n 4. Grey Cover Stitch .........................................0108n 5. Cover Stitch Line Details ..............................0670

HG734_48 Lil’ Pumpkin Appliquén 1. Orange Pumpkin Placement Stitch .............1200n 2. Orange Cut Line & Tackdown ......................1200n 3. Orange Cover Stitch & Details.....................1200n 4. Cover Stitch Line Details ..............................0670n 5. Leaves & Words ...........................................0800n 6. Face & Leaf Outlines ...................................0020

HG735_48 Little Ghost Appliquén 1. Ghost Placement Stitch ...............................0108n 2. Ghost Cut Line & Tackdown ........................0108n 3. Ghost Cover Stitch .......................................0108n 4. Light Grey Ghost Line Details ......................0142n 5. Face ..............................................................0020n 6. Cover Stitch Line Details ..............................0670

HG736_48 Little Jack-O-Lantern Appliquén 1. Pumpkin Placement Stitch ...........................0800n 2. Pumpkin Cut Line & Tackdown....................0800n 3. Pumpkin Orange Line Details ......................0800n 4. Pumpkin Cover Stitch ..................................1200n 5. Pumpkin Face ..............................................0020n 6. Cover Stitch Line Details ..............................0670

HG737_48 Corner Spider Webn 1. Single Color Design .....................................0020

HG738_48 Jack-O-Lantern Face Appliquén 1. Mouth & Eyes Placement Stitch ..................0108n 2. Mouth & Eyes Cut Line & Tackdown ...........0108n 3. Mouth & Eye Swirls ......................................8014n 4. Grey Cover Stitch .........................................0108n 5. Cover Stitch Line Details ..............................0670

HG739_48 Mini Ghostn 1. Ghost ............................................................0670n 2. Ghost Outlines ..............................................0142n 3. Face ..............................................................0020

HG740_48 Mini Halloween Bordern 1. Skull, Candy, & Star .....................................0670n 2. Grey Outlines ...............................................0142n 3. Face ..............................................................0020n 4. Pumpkin & Candy ........................................0800n 5. Candy & Moon .............................................0221

HG741_48 Ghoulfriend Appliquén 1. Head Placement Stitch ................................0142n 2. Head Cut Line & Tackdown .........................0142n 3. Cover Stitch ..................................................0142n 4. Bow ...............................................................1200n 5. Cover Stitch Line Details & Bow Linework ..0670n 6. Skull Face .....................................................0020n 7. Words ...........................................................0108

HG742_48 Boofriend Appliquén 1. Head Placement Stitch ................................0142n 2. Head Cut Line & Tackdown .........................0142n 3. Cover Stitch ..................................................0142n 4. Cover Stitch Line Details ..............................0670n 5. Face & Bow ..................................................0020n 6. Words ...........................................................0108

Halloween TreaTsPack 12357 • 24 Designs

Page 4: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Listings below indicate color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads.

HG743_48 Boo! Appliquén 1. Green B Placement Stitch ...........................5912n 2. Green B Cut Line & Tackdown ....................5912n 3. Green Swirls .................................................5912n 4. Orange O Placement Stitch .........................0800n 5. Orange O Cut Line & Tackdown ..................0800n 6. Orange Swirls ...............................................0800n 7. Purple O Placement Stitch...........................3040n 8. Purple O Cut Line & Tackdown ...................3040n 9. Purple Swirls .................................................3040n 10. Yellow Exclamation Point Placement Stitch ......................................................0221n 11. Yellow Exclamation Point Cut Line & Tackdown ...........................................0221n 12. Yellow Swirls .................................................0221n 13. Black Cover Stitch ........................................0020n 14. Cover Stitch Line Details ..............................0670

HG744_48 Jack & Cat Appliquén 1. Yellow Moon Placement Stitch ....................0221n 2. Yellow Moon Cut Line & Tackdown .............0221n 3. Yellow Swirls, Stars, & Cover Stitch ............0221n 4. Orange Pumpkin Placement Stitch .............1200n 5. Orange Pumpkin Cut Line & Tackdown ......1200n 6. Orange Pumpkin Linework Details & Cover Stitch .......................................1200n 7. Pumpkin Face & Cat Tail .............................0020n 8. Black Cat Placement Stitch .........................0108n 9. Black Cat Cut Line & Tackdown ..................0108n 10. Cat Cover Stitch ...........................................0108n 11. Cat Eyes & Cover Stitch Line Details ..........0670n 12. Cat Face .......................................................0142

HG745_48 Skull & Bones Appliquén 1. Skull Placement Stitch .................................0142n 2. Skull Cut Line & Tackdown ..........................0142n 3. Face Linework ..............................................0142n 4. Black Face ....................................................0020n 5. Grey Cover Stitch .........................................0108n 6. Cover Stitch Line Details ..............................0670

HG746_48 Halloween Corner Appliquén 1. Light Purple Background .............................3040n 2. Yellow Moon Placement Stitch ....................0221n 3. Yellow Moon Cut Line & Tackdown .............0221n 4. Yellow Moon Swirls & Cover Stitch .............0221n 5. Ghost Placement Stitch ...............................0142n 6. Ghost Cut Line & Tackdown ........................0142n 7. Grey Ghost Details .......................................0142n 8. Ghost Cover Stitch .......................................0108n 9. Orange Pumpkin Placement Stitch .............0800n 10. Orange Pumpkin Cut Line & Tackdown ......0800n 11. Orange Pumpkin Details ..............................0800n 12. Tombstone & Pumpkin Details ....................0020n 13. Pumpkin Cover Stitch ..................................1200n 14. Black Cover Stitch ........................................0020n 15. Cover Stitch Line Details ..............................0670n 16. Tombstone Details & Lettering.....................0142

HG747_48 Trick-Or-Treat Appliquén 1. Yellow Green Swirls .....................................6151n 2. Cobweb ........................................................0142n 3. Trick Work Green Satins ..............................5912n 4. Yellow Swirls on R ........................................0520n 5. R Letter Satin Outlines .................................1010n 6. Purple Swirls .................................................3350n 7. Treat Word Purple Satins .............................3040n 8. Yellow On Candy Placement Stitch .............0108n 9. Yellow on Candy Cut Line & Tackdown ......0108n 10. Skull & White on Candy Placement Stitch ..0108n 11. Skull & White on Candy Cut Line & Tackdown ...........................................0108n 12. Orange on Candy & Pumpkin Placement Stitch ......................................................0108n 13. Orange on Candy & Pumpkin Cut Line & Tackdown ..............................................0108n 14. Candy Cover Stitch ......................................0108n 15. Skull Cover Stitch & Pumpkin Face ............0020n 16. Pumpkin Cover Stitch ..................................1200n 17. Cover Stitch Line Details ..............................0670

Halloween TreaTsPack 12357 • 24 Designs

Page 5: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

7 | Pagewww.embroideryonline.com

©2010 OESD, LLC. All rights reserved.

printer’s

Page 6: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

aPPlique Patterns

Halloween TreaTs

Page 7: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

aPPlique Patterns

Halloween TreaTs

Page 8: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

aPPlique Patterns

Halloween TreaTs

Page 9: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

aPPlique Patterns

Halloween TreaTs

Page 10: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

aPPlique Patterns

Halloween TreaTs

Page 11: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

aPPlique Patterns

Halloween TreaTs

Page 12: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

aPPlique Patterns

Halloween TreaTs

Page 13: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Halloween TreaTs

HG724_48_CWA01 For use with the BERNINA

CutWork Accessory3.89 X 3.07 in.

98.81 X 77.98 mm2,990 St.

HG725_48_CWA03 For use with the BERNINA

CutWork Accessory2.42 X 2.48 in.

61.47 X 62.99 mm1,841 St.

HG726_48_CWA03 For use with the BERNINA

CutWork Accessory1.48 X 1.62 in.

37.59 X 41.15 mm1,022 St. S

HG727_48_CWA03 For use with the BERNINA

CutWork Accessory2.95 X 2.52 in.

74.93 X 64.01 mm2,049 St.

HG724_48_CWA02 For use with the BERNINA

CutWork Accessory3.15 X 1.92 in.

80.01 X 48.77 mm1,934 St.

HG725_48_CWA04 For use with the BERNINA

CutWork Accessory2.16 X 1.58 in.

54.86 X 40.13 mm1,300 St.

HG726_48_CWA04 For use with the BERNINA

CutWork Accessory1.23 X 2.75 in.

31.24 X 69.85 mm1,309 St. S

HG727_48_CWA04 For use with the BERNINA

CutWork Accessory4.24 X 2.62 in.

107.70 X 66.55 mm2,692 St.

HG724_48_CWA03 For use with the BERNINA

CutWork Accessory3.29 X 4.17 in.

83.57 X 105.92 mm3,225 St.

HG725_48_CWA05 For use with the BERNINA

CutWork Accessory3.69 X 3.77 in.

93.73 X 95.76 mm3,122 St.

HG726_48_CWA05 For use with the BERNINA

CutWork Accessory3.90 X 3.77 in.

99.06 X 95.76 mm2,874 St.

HG727_48_CWA05 For use with the BERNINA

CutWork Accessory1.69 X 1.67 in.

42.93 X 42.42 mm1,226 St.

HG725_48_CWA01 For use with the BERNINA

CutWork Accessory3.98 X 2.18 in.

101.09 X 55.37 mm3,081 St.

HG726_48_CWA01 For use with the BERNINA

CutWork Accessory3.42 X 3.43 in.

86.87 X 87.12 mm2,527 St.

HG727_48_CWA01 For use with the BERNINA

CutWork Accessory2.59 X 1.86 in.

65.79 X 47.24 mm1,628 St.

HG728_48_CWA01 For use with the BERNINA

CutWork Accessory4.08 X 4.15 in.

103.63 X 105.41 mm3,755 St.

HG725_48_CWA02 For use with the BERNINA

CutWork Accessory3.21 X 2.08 in.

81.53 X 52.83 mm2,262 St.

HG726_48_CWA02 For use with the BERNINA

CutWork Accessory1.76 X 4.15 in.

44.70 X 105.41 mm1,835 St.

HG727_48_CWA02 For use with the BERNINA

CutWork Accessory3.15 X 2.63 in.

80.01 X 66.80 mm2,145 St.

HG728_48_CWA02 For use with the BERNINA

CutWork Accessory3.01 X 2.94 in.

76.45 X 74.68 mm2,305 St.

Page 14: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Halloween TreaTs

HG729_48_CWA01 For use with the BERNINA

CutWork Accessory3.94 X 3.71 in.

100.08 X 94.23 mm3,367 St.

HG730_48_CWA03 For use with the BERNINA

CutWork Accessory1.85 X 2.28 in.

46.99 X 57.91 mm1,617 St.

HG734_48_CWA For use with the BERNINA

CutWork Accessory2.18 X 2.14 in.

55.37 X 54.36 mm1,537 St.

HG738_48_CWA03 For use with the BERNINA

CutWork Accessory1.83 X 1.85 in.

46.48 X 46.99 mm1,168 St.

HG729_48_CWA02 For use with the BERNINA

CutWork Accessory2.04 X 1.85 in.

51.82 X 46.99 mm1,085 St.

HG730_48_CWA04 For use with the BERNINA

CutWork Accessory4.30 X 3.95 in.

109.22 X 100.33 mm3,354 St.

HG735_48_CWA For use with the BERNINA

CutWork Accessory3.23 X 3.56 in.

82.04 X 90.42 mm2,818 St.

HG741_48_CWA For use with the BERNINA

CutWork Accessory2.04 X 2.22 in.

51.82 X 56.39 mm1,506 St.

HG729_48_CWA03 For use with the BERNINA

CutWork Accessory4.24 X 3.80 in.

107.70 X 96.52 mm3,015 St.

HG731_48_CWA For use with the BERNINA

CutWork Accessory2.11 X 2.51 in.

53.59 X 63.75 mm1,664 St.

HG736_48_CWA For use with the BERNINA

CutWork Accessory2.88 X 2.93 in.

73.15 X 74.42 mm2,187 St.

HG742_48_CWA For use with the BERNINA

CutWork Accessory2.04 X 2.22 in.

51.82 X 56.39 mm1,506 St.

HG730_48_CWA01 For use with the BERNINA

CutWork Accessory4.15 X 2.24 in.

105.41 X 56.90 mm3,104 St.

HG732_48_CWA For use with the BERNINA

CutWork Accessory3.80 X 2.39 in.

96.52 X 60.71 mm2,607 St.

HG738_48_CWA01 For use with the BERNINA

CutWork Accessory1.84 X 1.87 in.

46.74 X 47.50 mm1,195 St.

HG743_48_CWA01 For use with the BERNINA

CutWork Accessory2.40 X 1.83 in.

60.96 X 46.48 mm1,571 St.

HG730_48_CWA02 For use with the BERNINA

CutWork Accessory1.85 X 2.05 in.

46.99 X 52.07 mm1,487 St.

HG733_48_CWA For use with the BERNINA

CutWork Accessory2.23 X 2.48 in.

56.64 X 62.99 mm1,689 St.

HG738_48_CWA02 For use with the BERNINA

CutWork Accessory3.16 X 4.48 in.

80.26 X 113.79 mm3,753 St.

HG743_48_CWA02 For use with the BERNINA

CutWork Accessory2.43 X 1.52 in.

61.72 X 38.61 mm1,422 St.

Page 15: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Halloween TreaTs

HG743_48_CWA03 For use with the BERNINA

CutWork Accessory2.54 X 1.44 in.

64.52 X 36.58 mm1,459 St. S

HG745_48_CWA For use with the BERNINA

CutWork Accessory4.22 X 4.24 in.

107.19 X 107.70 mm4,312 St.

HG747_48_CWA02 For use with the BERNINA

CutWork Accessory1.71 X 1.43 in.

43.43 X 36.32 mm943 St. S

HG743_48_CWA04 For use with the BERNINA

CutWork Accessory2.83 X 1.25 in.

71.88 X 31.75 mm1,525 St. S

HG746_48_CWA01 For use with the BERNINA

CutWork Accessory2.32 X 2.31 in.

58.93 X 58.67 mm1,649 St.

HG747_48_CWA03 For use with the BERNINA

CutWork Accessory1.80 X 2.05 in.

45.72 X 52.07 mm1,301 St.

HG744_48_CWA01 For use with the BERNINA

CutWork Accessory2.70 X 2.65 in.

68.58 X 67.31 mm2,087 St.

HG746_48_CWA02 For use with the BERNINA

CutWork Accessory2.78 X 3.55 in.

70.61 X 90.17 mm2,665 St.

HG747_48_CWA04 For use with the BERNINA

CutWork Accessory1.79 X 1.64 in.

45.47 X 41.66 mm1,106 St.

HG744_48_CWA02 For use with the BERNINA

CutWork Accessory2.88 X 2.65 in.

73.15 X 67.31 mm2,148 St.

HG746_48_CWA03 For use with the BERNINA

CutWork Accessory4.53 X 2.76 in.

115.06 X 70.10 mm3,251 St.

HG747_48_CWA05 For use with the BERNINA

CutWork Accessory2.17 X 2.28 in.

55.12 X 57.91 mm1,591 St.

HG744_48_CWA03 For use with the BERNINA

CutWork Accessory3.03 X 4.06 in.

76.96 X 103.12 mm3,239 St.

HG747_48_CWA01 For use with the BERNINA

CutWork Accessory1.51 X 1.35 in.

38.35 X 34.29 mm845 St. S

Page 16: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

HG724_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG724_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3

HG724_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG725_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG725_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG725_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG725_48_CWA04 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG725_48_CWA05 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG726_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG726_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG726_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 3 ......Cut 3n 5. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG726_48_CWA04 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG726_48_CWA05 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG727_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 3 ......Cut 3n 5. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG727_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG727_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG727_48_CWA04 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 3 ......Cut 3n 5. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG727_48_CWA05 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 3 ......Cut 3

HG728_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG728_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG729_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Halloween TreaTs

NOTE: Placement Stitch and Basting Stitch should match your background fabric.

Page 17: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

HG729_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG729_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG730_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG730_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG730_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG730_48_CWA04 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG731_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG732_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG733_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG734_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG735_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG736_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG738_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG738_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG738_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG741_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG742_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG743_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG743_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG743_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG743_48_CWA04 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Halloween TreaTs

NOTE: Placement Stitch and Basting Stitch should match your background fabric.

Page 18: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

HG744_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG744_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG744_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG745_48_CWA For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG746_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG746_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG746_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG747_48_CWA01 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG747_48_CWA02 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG747_48_CWA03 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG747_48_CWA04 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

HG747_48_CWA05 For use with the BERNINA CutWork Accessoryn 1. Placement Stitch ..................................... 3600n 2. Basting Stitch .......................................... 1902n 3. BERNINA CutWork Accessory Cut 1 ......Cut 1n 4. BERNINA CutWork Accessory Cut 2 ......Cut 2n 5. BERNINA CutWork Accessory Cut 3 ......Cut 3n 6. BERNINA CutWork Accessory Cut 4 ......Cut 4

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Halloween TreaTs

NOTE: Placement Stitch and Basting Stitch should match your background fabric.

Page 19: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

PREPARE APPLIQUE FABRICStarch appliqué fabric 2-3 times following manufacturer’s instructions.1. Appliqué fabric should be crisp.2. Iron Appliqué Fuse & Fix to the wrong side of the starched appliqué fabric following instructions on 3. product packaging.

CUT APPLIQUÉ PIECESHoop one layer of Cut-Away Stabilizer.1. Send first CWA file to the embroidery machine. (CWA files are the pre-cut appliqué files to use with the 2. CutWork Accessory; these files will end in CWA01, CWA02, and CWA03 etc. The number of CWA files available for each design will depend upon how many separate appliqués each design contains.)Stitch the first color, this will be the placement stitch.3. Remove the hoop from the machine but do not remove the stabilizer from the hoop. Spray the hooped 4. stabilizer with temporary spray adhesive. Lay prepared appliqué fabric over the placement stitch, being sure to completely cover the stitching. Apply pressure to appliqué fabric to ensure it is adhered.Stitch the second color, this will be the basting stitch. It is meant to baste the appliqué fabric to your 5. hooped stabilizer.Replace normal stitch plate with the CutWork stitch plate.6. Unthread the machine.7. If necessary, turn off the upper thread control on your machine. Refer to your machine’s user manual. 8. Note that the most recent version of the 830 will perform this task automatically.Replace embroidery needle with the CutWork Accessory.9. Replace embroidery foot with foot #44 (If you do not have foot #44 you can leave foot #15 on the ma-10. chine; foot #44 will simply keep the cut fabric from flagging as much).Attach the hoop to the machine.11. To cut the first appliqué piece follow the “thread 12. changes” on your machine screen and turn the dial on the CutWork tool as required.Remove the hoop from the machine.13. Gently remove cut appliqué piece, trimming any 14. thread that may have not been cut completely. PHOTO 1Repeat as needed for designs with multiple appli-15. qué pieces.

TACkdOwn APPLIQUÉ And COmPLETE EmBROIdERy dESIgnReplace the embroidery needle and rethread the machine.1. Replace the embroidery foot #15.2. Spray hoop sized piece of stabilizer that is appropriate for your project and adhere to wrong side of back-3. ground fabric or project that is to be hooped.Hoop fabric/project and stabilizer.4. Attach hoop to machine.5. Send the embroidery file to the machine (this is not a CWA file).6. Stitch design as normal following the thread changes on the provided thread chart stopping after each 7. Appliqué Placement Stitch.

PHOTO 1

SUPPLIESCut-Away Stabilizer• Temporary Spray Adhesive• Appliqué Fuse & Fix Stabilizer• Embroidery Thread• Stabilizer that is appropriate for your project• BERNINA® CutWork Accessory•

Making Precut aPPliqué using Bernina© cutwork accessory

Page 20: Halloween TreaTs · 101.85 X 102.87 mm 11,117 St. R HG728_48 Spider Appliqué 3.76 X 3.78 in. 95.50 X 96.01 mm 10,775 St. R HG729_48 Jack-O-Lantern Appliqué 3.84 X 3.80 in. 97.54

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

After stitching an Appliqué Placement Stitch, take the precut 1. appliqué pieces required and peel off the cutaway backing and the release paper revealing a sticky backing. PHOTO 2Remove hoop from machine, but do not remove the fabric 2. from the hoop.Adhere precut appliqué piece evenly over the Appliqué 3. Placement Stitch; use pressure to make sure pieces stick well. PHOTO 3Reattach hoop to machine.4. Continue stitching design until all appliqué pieces are placed 5. and all stitching is complete. PHOTO 4

PHOTO 2

PHOTO 3

PHOTO 4

nOTE: design pictured is for instructional purposes and may not be included in this collection.

Making Precut aPPliqué using Bernina© cutwork accessory