Upload
ehab2003ye
View
213
Download
0
Embed Size (px)
DESCRIPTION
ch
Citation preview
Inject-Check Flow Control Device
COMPLETION SOLUTIONS
HAL14601
Inject-CheckCheck Valve
?e Inject-Check device is a =ow control accessory used incombination with an Otis slickline lock mandrel to create areliable retrievable downhole injection check valve. ?eInject-Check device incorporates the er multiple injection cycles
Benefits
Creates a safer snubbing environment by reducing plug failures
Fewer plug failures reduces slickline intervention costs
Check valve/lock combination can be run or retrieved on a singleslickline trip which also reduces slickline costs
Applications
Snubbing Plug
Pump-through plug for emergency well kill operations
Allows foamed N2 cleanouts above packers
Retrievable =oat for underbalanced drilling operations
www.halliburton.com
2010 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in thecontract between Halliburton and the customer that is applicable to the sale. H03786 12/10
COMPLETION SOLUTIONS
For more information on Inject-Check Flow Control Devices,please call your local Halliburton representative or email us at [email protected].
Inject-Check Flow Control Device Technical Specifications
Size in. (cm) 1.875 (4.76) 2.313 (5.88)
Material ES-MA-18-9
Service H2S
Seal Material Molly-filled TeflonTemperature Rating-Max F (C) 300 (149)
Maximum OD in. (cm) 1.87 (4.75) 2.307 (5.86)
Seal Bore ID-Min in. (cm) 0.875 (2.22) 1.15 (2.92)
Top Thread (Box) 1 3/8-14 UNS 1 3/4-12 UNS-2
Bottom Thread none
Pressure Rating psi (MPa) 10,000 (68.95)
Length in. (cm) 7.14 (18.14) 9.11 (23.14)
Max Recommended Flow Rate 3.57 bbl/min 6.27 bbl/min
Max Recommended Velocity 80 ft/sec
Flow Area-Max in2 (cm2) 0.601 (3.88) 1.057 (6.82)
Teflon is a registered trademark of Dupont.