Upload
voduong
View
212
Download
0
Embed Size (px)
Citation preview
ENGINEERING
2008 LTD
HALL
Hall Engineering is a privately-owned business situated in
the heart of the Staffordshire Moorlands. With a reputation
borne from over 18 years in business, high standards of
workmanship and quality, and a flexible approach to our
work, we pride ourselves in our ability to satisfy all our
customers’ needs.
Our aim has always been to produce equipment of the
highest quality at an affordable price, using British-made
parts wherever possible.
We are proud to be part of the British engineering industry
supporting the nation’s farmers and growers. Our
commitment to sourcing parts and suppliers from within the
UK means that our customers can be assured of quality,
reliability and traceability.
When you buy a machine from Hall Engineering you can be
sure it will be built to the highest standard from the strongest
steel, to tried and trusted designs and proven where it
matters - out in the field!
1
Committed toBritish engineering
Hall Engineering (2008) LtdStation Street, Leek, Staffordshire ST13 8BP
Tel: 01538 399566Fax: 01538 388746
Email: [email protected]: www.halleng2008.co.uk
ww
w.h
alleng2008.co
.uk
IND
EX
32
Product IndexBale Carrier 25Bale Grab 24Bale Grab, Heavy Duty 24Bale Spike 13Bale Squeezer 13Bale Trailer 7Big Bag Lifter 30Big Bale Mover 26Bucket, Auger Feeding 19Bucket, Mixer Feeder 18Bucket ,Type ‘A’ 16Bucket, Type ‘B’ 16Bucket, Type ‘C’ 17Bucket, Type ‘D’ 17Bucket, Type ‘DD’ 18Bucket, Type ‘E’ 18Bucket Options 19Feed Pusher 22Feed Pusher, Heavy Duty 22Forks 15Grab, Type ‘A’ 10Grab, Type ‘B’ 10Grab, Type ‘C’ 11Grab, Type ‘D’ 11Grab, Type ‘E’ 12Grab, Type ‘F’ 12Heavy Plant Low Loader 8Hydraulic Low Loader 9Log Splitter 28Pallet Fork Frames 31Replacement Headstocks 29Services 32Snow Plough 20Snow Plough, Bespoke Tractor Mounted 21Tipping Trailer, 1.25t 4Tipping Trailer, 2.25t 5Toolbar Adaptor 29Trailer Accessories 6Transport Box (Heavy Duty Tipping) 27Transport Box (Light Duty Tipping) 27Waste Bucket Grab, Extra Heavy Duty 13Agricultural Bucket Grab 14Work Platform 30Yard Scraper, Loader Mounted 13
Conformity to regulations
At Hall Engineering we are committed to all acts of legislationand Health and Safety requirements. This gives our dealers theassurance that they as a supplier as fulfilling their legalobligations to their customers.
All our products are CE marked and are supplied with acertificate of conformity complying with current EEC Directives.To conform with all current HSE directives all products aremarked giving accurate details of capacities and ratings. Underthe Provision & Use of Work Equipment Regulations (PUWER98) all Hall Engineering products are supplied (where applicable)with full operating instructions.
Advice when ordering
To ensure that your order is correctly fulfilled, please provide thefollowing information at the time of initial order:
• The Model Number as shown in this catalogue.
• The make and model of the telehandler, loader or skidsteerwith which the attachment is to be used.
• The type of carriage fitted to the machine.
All orders should be confirmed by fax or email.
Hall Engineering Ltd does not take any responsibility for issuesarising from incorrect information being provided at the time oforder.
NEW
NEW
NEW
NEW
NEW
NEW
NEW
ww
w.h
alleng2008.co
.uk
TR
AIL
ER
Sw
ww
.hal
leng2008.c
o.u
k
54
2.25 tonne Tipping Trailer1.25 tonne Tipping Trailer
Model Capacity Weight Body size Tyres
KT1.25T 1.25 tonne 250kg ulw 2m x 1.25mx 0.35m
13/850/12turf tyres
Model Capacity Weight Body size Tyres
KT2.25T 2.25 tonne 350kg ulw 2.5m x 1.5mx 0.4m
26/1200/12turf tyres
Ideal choice for smallerstables, nurseries,smallholders etc. ontractors up to 25hp.
Fully shotblasted andpowder coated, unique5-year warranty. Fullrange of accessories(see page 6). Ideal size trailer for livery yards, nurseries, golf
courses, sportsgrounds etc.
Fully shotblasted and powder coated, unique 5-yearwarranty. Full range of accessories (see page 6).
0.35m
2m
0.4m
2.5m
TR
AIL
ER
S
ww
w.h
alleng2008.co
.uk
BA
LE
TR
AIL
ER
Sw
ww
.hal
leng2008.c
o.u
k
76
Bale TrailerAccessories
Built as a premium product, our Bale Trailers offer acompetitively priced yet highly specified solution toyour transport needs. With a 360mm deep chassis,underfloor struts, chequer plate floor and 70mm boxsection extensions ladders as standard, you canconfidently load our Bale Trailers to the maximum dayafter day. Hydraulic brakes, road lighting, parkingbrake, drawbar skidand 1800mmextension ladders asstandard.
Trailers are availablewith wooden floors(either Keruing, Larch
Model Length Width Capacity Tyres Axle
BT21FT6T
BT22FT10T
BT26FT10T
BT26FT12T
BT28FT12T
BT32FT14T
21’
22’
26’
26’
28’
32’
8’2”
8’2”
8’2”
8’2”
8’2”
8’2”
6,000kg
10,000kg
10,000kg
12,000kg
12,000kg
14,000kg
12.5/80/15.3
12.5/80/15.3
12.5/80/15.3
385‘SuperSingle’
385‘SuperSingle’
385‘SuperSingle’
Hand OperatedHydraulic Pump
For use with quad bikes,4x4’s etc.
Model No: TA4
Capacity: 5.2L.
TR
AIL
ER
AC
CE
SS
OR
IES
Fully matched range of trailer accessories tocomplete your trailer package, perfect for stables etc.
1.25 tonne TrailerMesh ExtensionSides
Model No: TA1
Size: 2m x 1.25m x0.6m, 25mm mesh,rear opening,detachable door.
2.25 tonne TrailerMesh ExtensionSides
Model No: TA2
Size: 2.5m x 1.5m x0.6m, 25mm mesh,rear opening,detachable door.
WheelbarrowRamp,freestanding
Model No: TA3
Size: 2.5m x 0.625m
Range of hitches available include 50mm ball hitch,50mm diameter ring hitch, 25 and 30mm pin hitch(standard).
6 stud fixedsingle axle
70mm 6 studsprung tandemaxles
70mm 6 studsprung tandemaxles
80mm 8 studsprung tandemaxles
80mm 8 studsprung tandemaxles
90mm 10 studsprung tandemaxles
or 'Switchdecking'), sprung drawbars, crash rails etc.Please ring to discuss all special builds including otherlengths of trailer.
Also available are 26’ x 16’ Tonne Potato Box Trailerscomplete with sprung drawbar etc.
Models available as standard are:
ww
w.h
alle
ng2008.c
o.u
k
98
Hydraulic Low Loader Heavy Plant Low LoaderLO
W L
OA
DE
RS
Don’t be fooledinto thinking allplant trailersare the same.Having spent15 years building commercial vehicle beavertail plantbodies, we have transferred our knowledge in to ourTrailers. Each is generally a one-off tailored tocustomer requirements however we have strived tooffer a basic range of trailers with all your basicrequirements built in.
We use only 4" high tensile I-beam for crossmembers,let into eyelet cutouts in the chassis for ultimatestrength coupled with flexibility. Instead of treatedsoftwood timber for the floor we will use only 50mmsawn Keruing hardwood. This is always fitted to thebeavertail section, since steel-tracked machines willnot safely climb smooth steel slopes.
Ramps on the 13T Trailer are generally sprung, andramps on the 18T Trailer are generally timbered andhydraulic. Push-down rear legs are built in to theramps, however rear hydraulic legs can be fitted.
Weatherproof lockable storage lockers come asstandard, as do LED lights and an LED rear flashingbeacon. Mudguard/spray suppression can be added,as too can drop-down sides, bucket storage framesand side impact rails, along with removable rear balewedges for conversion to a flat bed trailer.
Model Length Width Capacity Tyres Axle
LL13T
LL18T
20’
24’
8’2”
8’2”
13,000kg
18,000kg
215/75-17.5dual tyres
445/45-19.5single lowprofile tyres
80mm 8 studsprung tandemaxles
90mm 10 studsprung tandemor 80mm tri-axle
Our new range of hydraulic lowering Low Loaders arethe perfect trailer for the transportation of wheeled andtracked medium plant and agricultural machinery.
All our trailers incorporate a hydraulic mechanism toraise and lower the axle, with jury struts incorporated.Mudguards and lights are integral as is hydraulicbraking.
We build our trailers with a full plant body style channelside rave incorporating chain bars and rope hooks.Lashing rings can be incorporated into both the sideraves and floor, and ramps can be supplied as either liftoff or fixed pivot on the body. Floors come as standardwith Durbar steel, however timber can be fitted onrequest.
Model Length Width Capacity Tyres Axle
HLL6T
HLL8T
14’(4.2m)
16’(5m)
8’2”
8’2”
6,000kg
8,000kg
12.5/80/15.36 stud
385 ‘SuperSingle’8 stud
70mm axle
80mm axle
ww
w.h
alleng2008.co
.uk
LO
W L
OA
DE
RS
NEWPRODUCT
NEWPRODUCT
1110
Type ‘A’ Grab
Model Tines Width
GA1
GA2
GA3
5
6
8
3’ (0.9m)
4’ (1.2m)
5’ (1.5m)
Primarily built forskidsteer loaders,a low attachmentweight coupledwith a maximumcapacity. Comeswith hoses andstandard skidsteerattachmentbrackets or can be orderedwith alternatives, subjectto additional charge.Other sizes available.
0.8m
0.81m
Type ‘B’ GrabStrong yetlight-weightconstruction, anaffordable grab fortractors and smallloading shovels etc.Extra wide openingangle. All pivotpoints fully greased,‘SHW’ tines fitted toall grabs. Full back plate foreasy bracket mounting.Comes with hoses andhydraulic couplings,brackets extra.
Also available as a forkunit only, with or withoutside tines.
Model Tines Width
GB1
GB2
6
8
4’ (1.2m)
5’ (1.5m)
0.8m
0.81m
GR
AB
Sw
ww
.hal
leng2008.c
o.u
kType ‘C’ Grab
Ultra heavy duty Grabsfor telescopic handlers,loading shovels etc.Twin ram design, pivotbushes on main pivots,Conus 2 ‘SHW’ tines onthe bottom frame,comes with hoses,hydraulic couplings andbrackets as standard.
Model Tines Width
GC1
GC2
GC3
GC4
9
10
11
12
5’ (1.5m)
6’ (1.8m)
7’ (2.1m)
7’6” (2.3m)
1.08
5m
1m
Type ‘D’ Grab
Other widths available.
Ultra heavy duty Fork &Grapples for telescopichandlers, loadingshovels etc. Twin ramdesign, pivot bushes onmain pivots, Conus 2‘SHW’ tines on thebottom frame, comeswith hoses, hydrauliccouplings and bracketsas standard.
Model Tines Width
GD1
GD2
GD3
GD4
9
10
11
12
5’ (1.5m)
6’ (1.8m)
7’ (2.1m)
7’6” (2.3m)
1.08
5m
1m
ww
w.h
alleng2008.co
.uk
GR
AB
S
Other widths available, ForkUnit only also, with or withoutside-tines.
ww
w.h
alleng2008.co
.uk
1312
New for 2013, our GFRange of heavy dutygrabs suitable for largertractor loaders, smallhandlers and pivot steerloaders etc.
With a wide openingaction and twin ramdesign, coupled with a new bolt-on bracket assemblyand a good grab capacity, our grabs are proving amarket leader. Other widths available.
All our Grabs come complete with hoses, q/rcouplings and brackets as standard. Check valvesavailable on request. Side tines are also available,please specify when ordering.
Add suffix ‘H’ forHardox Tines i.e.GF1 becomes GF1Hfor 4’ Grab withHardox Tines.
Model Tines Width
6
8
9
4’ (1.2m)
5’ (1.5m)
6’ (1.8m)
GF1
GF2
GF3
Our Waste Bucket Grabsare built to last anddesigned to perform inthe waste re-handlingindustry.
All our bucketsare built fromheavy gaugesteel (6mm forthe WG1 and8mm for the WG2/3and 4) and have heavyduty toe plates fitted (20mm for the WG1 and 25mmfor the WG2/3 and 4).
Bolt-on reversible toe plates come as standard andthe main pivots have bushes fitted. The grab top caneither be one or two-piece construction and armouredhoses, ram protection, spill guards and check valvescan be fitted on request.
All our Waste Bucket Grabs come complete withattachment brackets, hoses and quick releasecouplings as standard.
Other widths available on request.
Waste Bucket Grab(Extra heavy duty)
Model Width Capacity
WG1
WG2
WG3
WG4
7’6” (2.3m)
7’6” (2.3m)
7’6” (2.3m)
8’4” (2.5m)
1m3
1.7m3
2m3
3.1m3
NEWPRODUCT
Type ‘F’ Grab
All new Heavy DutyGrab suitable for largetractors, handlers andloading shovels.
Twin vertical ram designwith rear facing hoses,pivot bushes on all pins,open back for clearvision and better over-spill clearing, Conus 2 x1000mm ‘SHW’ tines fitted to bottom frame, Conus1 x 800mm curved tines fitted to grab. Hardox tinegrabs available. 1370mm wide opening grab size.
Check valves, hoses, Q/R fittings and brackets fittedas standard, side tines can be added, please specifywhen ordering.
Add suffix ‘H’ forHardox tines i.e. GE1becomes GE1H for 5’grab with Hardoxtines.
Model Tines Width
GE1
GE2
GE3
GE4
8
9
10
10
5’ (1.5m)
6’ (1.8m)
7’ (2.1m)
7’6” (2.3m)
ww
w.h
alle
ng2008.c
o.u
kG
RA
BS Type ‘E’ Grab
NEWPRODUCT
GR
AB
S
1514
Type 'A' Fork is fitted withSHW Conus 2 tines, fittedinto sockets.
Type 'B' Fork is fitted withalloy steel 50mm diameter'Strimech' type tines fittedinto sockets.
Type 'C' Fork is fitted with'Hardox' weld on tines.
Model Width
FA1
FA2
FA3
FA4
6’ (1.8m)
7’6” (2.2m)
8’4”( 2.5m)
10’ (3m)
Model Width
FB1
FB2
FB3
FB4
6’ (1.8m)
7’6” (2.2m)
8’4”( 2.5m)
10’ (3m)
Model Width
FC1
FC2
FC3
FC4
6’ (1.8m)
7’6” (2.2m)
8’4”( 2.5m)
10’ (3m)
Forks
Suitable for the handling of silage, grass, manure etcand with a range of tine options available. Comescomplete with brackets. Other widths available.
FO
RK
S
Built to handle looseagricultural material,such as maize silage,our Agricultural BucketGrabs are aninvaluable tool aroundthe farm.
Ranging in capacityfrom 1m3 for tractorloaders, up to 3.1m3
for large capacitytelescopic handlers,and anything inbetween, we can offera machine for anyapplication. All ourgrabs are built from 6mm plate, with a 20mm toe plateon the AG1 and AG2, and a 25mm toe plate on theAG3 and AG4.
Bolt-on toe plates and check valves can be fitted onrequest, and all our grabs come complete withattachment brackets, hoses and quick releasecouplings.
Other widths available on request.
Agricultural Bucket Grabw
ww
.hal
leng2008.c
o.u
kG
RA
BS
Model Width Capacity
AG1
AG2
AG3
AG4
7’6” (2.3m)
7’6” (2.3m)
7’6” (2.3m)
8’4” (2.5m)
1m3
1.7m3
2m3
3.1m3
NEWPRODUCT
ww
w.h
alleng2008.co
.uk
ww
w.h
alleng2008.co
.uk
BU
CK
ET
S
17
ww
w.h
alle
ng2008.c
o.u
kB
UC
KE
TS
16
Type ‘B’ Bucket
Type ‘A’ Bucket
A range of small capacitylightweight buckets ideallysuited for use on skidsteerloaders and smallertractor loaders. 4” x 5/8”boron toe plate, 4mmplate construction, 3” x1/2” wear stripsunderneath. Comescomplete with brackets.
Suitable for largerskidsteer loaders, tractorloaders, small telescopichandlers etc, 6” x 3/4”boron toe plate, 4” x 5/8”wear strips underneath,6mm plate construction,reinforced back plate.Comes with brackets.
Other sizes available.
Model Width Capacity
A1
A2
A3
A4
3’ (0.9m)
4’ (1.2m)
5’ (1.5m)
6’ (1.8m)
0.2m3
0.23m3
0.28m3
0.34m3
Model Width Capacity
B1
B2
B3
B4
B5
4’ (1.2m)
5’ (1.5m)
6’ (1.8m)
6’8” (2m)
7’6” (2.3m)
0.43m3
0.53m3
0.65m3
0.7m3
0.8m3
Other sizes and wider widths available.
.610
m
.885m
.575
m.710m
Model Width Capacity
C1
C2
C3
6’8” (2m)
7’6” (2.3m)
8’4” (2.5m)
0.9m3
1m3
1.1m3
Other sizes and widthsavailable.
Ideal for larger tractorloaders, small capacityloading shovels andtelescopic handlers.
6” x 3/4” boron top plate.3 off 4” x 5/8” wearstrips underneath. 6mmplate constructions. Fullback brace with flat top to bucket for easy visuallevelling. Supplied with brackets.
.72m
.9m
Type ‘C’ Bucket
Type ‘D’ Bucket
Ideally suited to telescopichandlers and larger loadingshovels. Built from 6mmplate with a 6” x 3/4” toeplate across the front andup the leading edges, 4” x5/8” wear strips underneath,fully braced back withbracket straps and inner wear gussets. Centre gussetscan be added. Comes complete with brackets.
Model Width Capacity
D1
D2
D3
6’ (1.8m)
7’6” (2.2m)
8’4” (2.5m)
1.35m3
1.7m3
1.9m3
Other widths available.
.95m
1.22m
ww
w.h
alleng2008.co
.uk
BU
CK
ET
Sw
ww
.hal
leng2008.c
o.u
k
1918
BU
CK
ET
S
Type C, D and E bucketscan all be supplied with araised back ‘spill guard’and/or a bolt-on reversibletoe plate.
Add suffix ‘RB’ for raisedback and ‘TP’ for bolt-ontoe plate.
Model Width Capacity Description
AB Mini
AB1
AB2
6’ (1.8m)
6’8” (2m)
6’8” (2m)
0.5m3
1.7m3
1.7m3
Fixed brackets
Fixed brackets
Hydraulic side shift
Auger Feeding Bucket
Suitable for feeding concentrates, roots etc. Ourbuckets offer a cost-effective solution to the choppingand feeding of manydifferent feedstuffs. Allcome as standard withbrackets fitted andcustomer’s choice ofchopping grid, agitatorsand stone door (manualor hydraulic).
Also available is a sideshift option enabling thesuccessful discharge ofthe bucket into troughsand down feed fenceswithout driving over thefeed, going back to thecentralised position forloading andtransporting.
Type ‘E’ Bucket
Model Width Capacity
E1
E2
7’6” (2.2m)
8’4” (2.5m)
2.8m3
3.1m3
1.2m
1.5m
Suitable for handlers over3,000kg capacity, generalrehandling buckets.
Type ‘DD’ Bucket
Ideally suited for handlers over 2,500kg capacity,general rehandling buckets.
Model Width Capacity
DD1
DD2
DD3
6’ (1.8m)
7’6” (2.2m)
8’4” (2.5m)
1.6m3
2m3
2.2m3
Other widths available.
1.06
m
1.31m
Bucket options
These buckets arebuilt to provide acost-effective solutionto mix and feedsilage, maize silage,concentrates,brewers’ grains etc.
The large diameter auger coupled with a large centralcore enable grass and maize silage to be successfullymixed and discharged.
Ideally coupled with our unique hydraulic sideshiftassembly, these buckets will easily fill feed troughs ina minimum of time.
All come as standard with brackets fitted and manualstone trap.
Mixer Feeder Bucket
Model Width Capacity Description
AB3
AB4
6’8” (2m)
6’8” (2m)
1.7m3
1.7m3
Fixed brackets
Hydraulic side shift
Auger feeding bucket
Side shift option
Mini feeding bucket
NEWPRODUCT
ww
w.h
alle
ng2008.c
o.u
kS
NO
W P
LO
UG
H
Don’t get caughtout next winter withour Snow Plough.With blades rangingfrom 6’ up to 10’and incorporatingour unique 3-wayheadstock, you canfit this machine toeither a 3-pointlinkage, ‘A’ frame or pallet forks, enabling customersto fit to a standard fork-lift for business yard clearing.Available with a blade that pivots up to 25˚ left or rightand can also be set straight. A reversible rubber edgecomes as standard, but can be replaced with metal,and either metal skid or castor wheels can be fitted.Please specify when ordering.
Other widths available and also available with loadermounting carriages at no extra cost.
Optional stand leg available to support plough whenun-hitched.
12” Raised back section is now available to bolt onand raise your Plough to 3’ high. Please add suffix‘RB’ when ordering.
Snow Plough
Model Size
6’ x 2’
8’ x 2’
9’ x 2’
10’ x 2’
SP6
SP8
SP9
SP10
2120
SN
OW
PLO
UG
Hw
ww
.halle
ng2008.co
.uk
Hall Engineeringhave the ability tobuild bespoke SnowPlough Attachmentson to any tractor. Webuild a mountingframe utilising thetractor’s frontmountings and linkthis to a Snow Plough Headstock via pivoting lift arms.
A single-acting hydraulic ram lifts the plough up whennot in use, and lowers on to the pre-set castors usingthe float function on the tractor’s hydraulics. Thissystem is ultimately the best for Snow Ploughattachment as it keeps the Plough mounted close tothe tractor for increased manoeuvrability whilstremoving the need for costly front linkage assemblies.
The Plough can be quickly attached and removed andcan work on any tractor with a single hydraulic spool.
Please contact sales at Hall Engineering to discusscosts and options.
Bespoke Tractor MountedSnow Ploughs
2322
ww
w.h
alleng2008.co
.uk
BA
LE
HA
ND
LIN
G E
QU
IPM
EN
Tw
ww
.hal
leng2008.c
o.u
kBale Squeezer
A really robustmachine suitable forhandling wrappedround silage balesetc. Comes withremovable tubes touse as a twin spike.Complete with hosesand q/r couplings,brackets extra. Canbe supplied with41/2” tubes(standard) or 31/2”.
Capacity 1,100kg.
Model No: BS1
FE
ED
PU
SH
ER
S
Heavy Duty Feed Pusher
Feed Pusher
Model Tyre position
Horizontal
Angled
FP1
FP2
Model Tyre position
Horizontal
Angled
FP3
FP4
A really useful tool to keep your feed passages clean.Incorporating our unique 3-way headstock, thisimplement can be fitted via 3-point linkage, ‘A’ frameor pallet forks. Fully adjustable from 8’ up to 10’,comes with tyres fitted. Can be specified withhorizontal or angled (shown) tyres.
Built primarily formounting onto loadersand telescopic handlers,this machine is built to aheavier specificationthan our normal Pusher.
Fully adjustable from 8'up to 16' feed passages.Comes complete withbrackets. Can be fitted with horizontal instead ofangled tyres, please specify when ordering.
Bale Spike
Bale Spikes, generally made to order, from singlespike, loader or rear mounted to twin spike frames,with extensions for stacked bales, conus 1, 2 or 3tines, all makes of loader brackets fitted.
2524
ww
w.h
alleng2008.co
.uk
BA
LE
HA
ND
LIN
G E
QU
IPM
EN
Tw
ww
.hal
leng2008.c
o.u
kB
ALE
HA
ND
LIN
G E
QU
IPM
EN
T Bale Grab
Heavy Duty Bale Grab
A really adaptable grabfor use on round bales(on either flat or roundsides), square orheston bales etc. Fullyadjustable from 1’ upto 8’ opening. Comeswith hoses and q/rcouplings. Bracketsextra.
Capacity: 800kg.
Model No: BG1
Built in collaboration with RES Tractors of Harby,these grabs are designed for continued heavy usein the loading and stacking of all types of bales,with many units moving in excess of 10,000 balesper year. You can put your confidence in thismachine to work hard day in, day out.
The width of the grab can be increased from1,200mm to customer specification in order tohandle two bales side by side.
Capacity: 1,500kg.
Model No: BG2
Bale Carrier
Our Bale Carriers can handle either one or two roundbales with ease, perfect when coupled with our BaleSqueezer on your loader for rapid shifting of roundbales. On the BC1 and BC2, the tubes can beremoved to make a useful Twin spike Frame. Fittedwith a standard Cat. 2, 3- point linkage.
Model Tubes Capacity
BC1
BC2
BC3
BC4
Removable
Removable
Fixed
Fixed
One bale
Two bales
One bale
Two bales
2726
ww
w.h
alleng2008.co
.uk
TR
AN
SP
OR
T B
OX
ES
Transport Box (Heavy Duty Tipping)
Transport Box (Light Duty Tipping)
Can also be suppliedas a non-tippingversion. Other widthsavailable.
Built as a heavy dutyimplement, a goodtransport box can takeon the work of a smallfront loader. Ours aremade from 4mm plate,with a 4” x 5/8” borontoe plate at the diggingedge. With a reallyrobust 3-point linkageand tipping mechanism,plus a two-wayhingeing rear door.
Model Width Linkage
TB1
TB2
TB3
4’ (1.2m)
5’ (1.5m)
6’ (1.8m)
Cat. 1
Cat. 2
Cat. 2
Big Bale Mover
Our Light Duty Boxes arebuilt to the same highstandard as our HeavyDuty Boxes but at a moreeconomical budget andare more suited to thegeneral smallholderwanting to carry lightergoods such as hay, straw,feed etc.
Incorporating both Cat 1and Cat 2 linkage pins,tipping mechanism,locking pin and sliding reardoor, these Boxes willprove a useful additionto any farm.
Model Width Linkage
TB1(L)
TB2(L)
TB3(L)
4’ (1.2m)
5’ (1.5m)
6’ (1.8m)
Cat. 1/2
Cat. 1/2
Cat. 1/2
Our Yard Scrapers are a well built versatile implementdesigned for yard cleaning of slurry and other wastewith ease.
Built to mount on to a handler, loading shovel, tractorloader or skid steer loader, they come complete withmounting brackets, 6” reversible rubber edge and ourfloating headstock system toensure even scraper distributionand unnecessary rubber wear.
Other widths available on request.
Yard Scraper (Loader mounted)
ww
w.h
alle
ng2008.c
o.u
kYA
RD
SC
RA
PE
R/B
ALE
MO
VE
R
Designed as the ideal tool for moving, stacking andtransportation of large straw bales (especially quadrantsized), our Big Bale Mover has the capacity to cary upto 3 quadrant bales at once. Using our unique fold upback rests and fold down tines, this machine can bepacked away into a safe, compact format whentravelling on the highway and can be set up for work inseconds.
A really useful feature is the pivoting tine rail whichenables retraction of the tines from the bales by use ofthe loader crowd control, whilst the back rests hold thebales steady to avoidtipping over the stack.
Supplied fitted withbrackets as standard
Model Capacity
BM1
BM2
1.5t/3 Quadrant bales
3t/3 Big Hesston bales
Model Width
YS1
YS2
6’ (1.8m)
8’ (2.5m)
ww
w.h
alle
ng2008.c
o.u
kLO
G S
PLIT
TE
R
28 29
Log Splitter
Our hydraulic Log Splitterswork effortlessly and quickly,saving time and money. Builtto fit on a Cat. 1, 3-pointlinkage or bigger, can also beused freestanding. Electric orpetrol power-packs alsosupplied for independencefrom a tractor. All our LogSplitters are fully CEcompliant and come withBoron steel blade, two-handed operation, serialnumber and operator’smanual.
Either a 2- or 4-way splittinghead is available on the LS2Splitter.
We can now offer a full rangeof static and fully legal roadtowable engine driven LogSplitters. We offer a choice ofHonda petrol or Lombardinidiesel electric start engines.Please give our sales team acall to discuss options.
Replacement Headstocks
Hall Engineering offer replacement headstocks both toOEM’s, dealers and end users. We work as thepreferred supplier to Dieci Telehandlers for the supplyof various patterns of headstock and can offer thisservice on other makes.
Hydraulic locking comes as standard and we can eitherwork from existing headstocks as patterns tomanufacture complete or modify your headstock.
Please contact our Sales Office to discuss.
Hall Engineering offer a bespoke Toolbar Adaptordesign and build service to enable you to pick upalternative makes of loader brackets with your loader.These range from skidsteers picking up Quickebrackets for example, to JCB 3cx's picking upManitou, the possibilities are endless.
We design all our adaptors in-house on our CADsystem, ensuring we optimise the best lift height,crowd and dump etc. Locking pins can be manual,quick release or hydraulic depending on budget.Please call us for a quote.
Toolbar Adaptor
ww
w.h
alleng2008.co
.uk
HE
AD
STO
CK
S/TO
OLB
AR
AD
AP
TOR
Model Capacity Stroke Blade
10,000kg
26,000kg
400mm
400mm
150mm
200mm
LS1
LS2
ww
w.h
alleng2008.co
.uk
PA
LLE
T F
OR
K F
RA
ME
S
30 31
Pallet Fork Frames
All our Pallet Fork Frames feature integral mountingrails and loader brackets manufactured bespoke toapplication ensuring safe fitting. We only use highquality ‘Vetter’ pallet tines although we can supplyback plates on their own for customers to fit their owntines. Prices include brackets.
Add suffix ‘BG’ for back guard, add suffix ‘BM’ for barmounted tines.
Pallet Fork Framemodels PF1 (above),PF4 (above right) andPF2BM (right)
Model Rails Complete with
Class II
Class II
Class II
Class III
Dimensions
1.2m x 1.5T
1.2m x 2T
1.2m x 2T
1.2m x 3T
Skidsteer brackets
Loader brackets
Handler brackets
Handler brackets
PF1
PF2
PF3
PF4
PF5
Work Platform
Our Work Platforms aredesigned to becompletely compliantwith all HSE Guidelinesin their construction.This includes a non-slip floor with drainholes, raised backguard fully meshed,self-closing accessgate, kick rails etc.
All capacities are clearly marked and a handbook issupplied.
All platforms are fork mounted as standard withintegral heelpins. Loaderbrackets canbe fitted asextras.
One man capacity platform
JCB Q Fit Fork Carrier
Our Big Bag Lifters offera well made and costeffective means ofmoving 600 and 1,000kgbags for any purpose.We only use 41/2” heavygauge round tubes withfully domed ends, unlikemany manufacturers who choose to use square boxsection which do not ideally pick up round bag loops.
A wedge stop ensures the bags will easily slip on tothe tubes but will not inadvertently slip off should theoperator tip forwards. The tube centres are matchedto the bags to avoid sway when moving.
All Big Bag Lifterscome complete withbrackets. SWLCertificates areavailable on request,subject to additionalcharge.
Model Capacity
4 x 600kg bags
2 x 1,000kg bags
1 x 1,000kg bag
BL1
BL2
BL3
Big Bag Lifters
Model Dimensions Capacity
1.34m x 1.2m
1.8m x 1.2m
2.5m x 1.2m
One man
Two man
Three man
WP1 (1P)
WP1 (2P)
WP1 (3P)
WO
RK
PLAT
FO
RM
ww
w.h
alle
ng2008.c
o.u
k
ww
w.h
alle
ng2008.c
o.u
k
32
SE
RV
CIE
S
Here at Hall Engineering we keep extensive stock ofcomponents available for sale. These include:
• Hydraulic hose assemblies made to order
• Hydraulic rams
• Hydraulic valve blocks and ancillary equipment
• Hydraulic cylinder seal kits
• Tyres, axles, hitches, skids etc.
• Trailer brake rams
• Trailer lights
• Trailer jacks
• Bale spike and silage grab tines
• Linkage pins
• 'A' Frames
• Top links
• PTO shafts
• Oils and lubricants
• Paint
• Replacement Boron toe plates
• Bolt-on toe plates
• Steel section
• Steel processing
• Machine repairs
Services