Hager for LT

7/27/2019 Hager for LT

1/20

Product Portfolio

2008

Electrical Distribution Systems


2/20

From single product to complete system

Hager products continue to provide solutions. When we started our

company over 50 years ago, we set out a simple tenet, which remains

intact to this very day. This is to make a technological contribution toenhance the standard of living, by developing safe, secure and stylish

products. This philosophy has been applied to all our products to

provide solutions at the system level.

Daniel HagerExecutive Vice PresidentMarketing & SalesMember of the Board

1


3/202

THE HAGER GROUP

The Company Electronics business, is India's powergear, motor starters, Segment Focus

largest manufacture of low energy meters, final distributionLarsen & Toubro is a L&T has a wide range of

voltage switchgear, with the products, wires and host of othertechnology-driven USD 5 billion products & solutions to address

scale, sophistication and range accessories. The productscompany that infuses every customer requirement.

to meet global benchmarks. With conform to internationalengineering with imagination. The company has dedicated

over four decades of experience standards, carry CE markingsThe company offers a wide specialists for vital segments

in this field, the company today and are KEMA certified.range of advance solutions in like, Industry, OEM, Agriculture,

enjoys a leadership position inthe field of Engineering, Building and Utilities.Distributionthe Indian market with growingConstruction, Electrical & L&T Switchgear is availablepresence in internationalElectronics, Machinery and through a network of more than

markets.Information Technology. 700 authorized stockiest, one ofIt offers a complete range ofL&T Switchgear, which forms a the largest distribution networksproducts including controlgear,part of the Electrical and in the industry.

LARSEN & TOUBRO LIMITED

With more than 10000 employees worldwide and a line of innovative

products, the Hager Group is one among the leading manufacturers

of electrical devices for residential and commercial buildings


4/20

+VisionSPN DBs

+VisionTPN DBs

+Vision TPNPPI DBs

+VisionVerticalTPN DBs

+Vision TPNPhaseSegeregatedDBs

+Vision TPNPhaseSelectorDBs

+VisionFlexiDBs

+VisionOne WayEnclosures

+VisionPlug &SocketOutlets

RCBOs RCCBHi Version

RCD Add-onBlocks

ELR SurgeProtectionDevices

IsolatingSwitches

ChangeoverSwitches

TimeSwitches

Time LagSwitches

TwilightSwitches

ModularContactors

LatchingRelays

PushButtons& IndicatorLights

Modular Bells& Buzzers

Thermostats Dimmers& DimmingSystems

VoltmetersAmmeters& SelectorSwitches

Cable EndBoxes

Auxilaries

& Accessories

Protection

Devices

Automation

& Control

Devices

Protection

Devices

Au

tomation

De

vices

3


5/204

Distribution Boards and Enclosures

+Vision TPN distribution boards

+

Vision TPN horizontal PPI distribution boards

4 way to 16 way enclosures in

fine texture finish in RAL 9003

colour

IP30 for single door, IP43 /

IP54 for double door DBs

Choice of Metal / Glazed

(transparent) door in double

door DBs

Suitable for flush / surface

mounting

Removable door, frame, front

plate & gland plate for ease of

installation & maintenance

Plastic inserts on corner for

protection & trendy look

Fully insulated 100 Amp

busbar for easy & fast

installation

Neutral bar with insulated

cover to avoid accidental

contact during maintenance

Cement spill protector provided

with double door DBs prevents

entry of cement & other

particles during civil work

Front door earthing provided in

double door DBs

DBs are supplied with colour

coded wire sets, neutral bar,

earth bar, cable ties, circuit

identification labels, blanking

plates as standard



colour

IP43 / IP54 for double door

DBs



door DBs


mounting



installation & maintenance Plastic inserts on corner for




installation








double door DBs




identification labels, blankingplates as standard

Provision to mount upto 8

module incomer & 2 module

sub-incomer & SP MCBs as

outgoing

As per IS 8623




colour





door DBs


mounting








installation



Cement spill protector

provided with double door

DBs prevents entry of cement

& other particles during civil

work

Front door earthing provided

in double door DBs





plates as standard


module incomer & SP MCBs

as outgoing

As per IS 8623


+Vision SPN distribution boards


6/205

+Vision Vertical TPN distribution boards ( Modular incomer)

+Vision Vertical TPN distribution boards (MCCB incomer)

+Vision TPN Tier PPI distribution boards





double door DBs





plates as standard


module incomer & 2 module

sub-incomer & SP MCBs as

outgoing

12 way DB also available with

DH MCCB ( TP upto 200A or

FP upto 160A ) as incomer

option As per IS 8623







& other particles during civil

work


in double door DBs





plates as standard


module incomer & SP/TP

MCBs as outgoing

As per IS 8623

Neutral bar with insulated 4 way to 16 way enclosures in


colour





door DBs


mounting






Fully insulated vertical busbar

assembly rated for 200 Amp,

tested for 10 kA.

Fully insulated vertical busbar

assembly rated for 200 Amp,

tested for 10 kA.









double door DBs





plates as standard

As per IS 8623




colour


DBs



door DBs


mounting








installation






colour


DBs



door DBs


mounting


plate & gland plate for ease ofinstallation & maintenance



Provision to mount DH MCCB

upto 200 A as incomer &

SP/TP MCBs as outgoing


7/20



colour

IP30 for single door, IP43 for

double door DBs


(transparent) door in doubledoor Dbs


mounting








installation

6

+Vision TPN Phase selector distribution boards

+Vision Flexi distribution boards

+Vision TPN Phase segregated consumer unit

Flexi DB available in 2,3 & 4

rows, upto 56 module




door DBs


mounting








double door DBs





plates as standard

Incomer, subcomer & outgoing

of each phase in separate

compartment

Also available with DH MCCB

( TP upto 200 A or FP upto

160A ) as incomer

As per IS 8623







& other particles during civilwork


in double door DBs





plates as standard

Provision to mount upto

8 module incomer & SP MCBs

as outgoing

As per IS 8623





double door DBs

DBs are supplied with neutral

bar, earth bar, cable ties,

circuit identification labels,

blanking plates as standard

As per IS 8623




colour





door DBs


mounting








installation





8/207

+Vision Plug & socket outlets

+Vision one way enclosures

+Cable end boxes (for vision DBs)


enclosures

IP30 degree of protection


mounting As per IS 8623

2 way, 4 way & 6 way

phase & three phase

IP30 enclosure with IP30 metal

plug & socket

IP30 enclosure with IP44

plastic plug & socket

Suitable for flush & surface

mounting

Supplied with interconnecting

wires and plug & socket

Texture finish, powder coated

with RAL 9003 color

10 Amp to 63 Amp in single

with RAL 9003

Cable end boxes suitable for

double door DBs

Facilitates wire dressing &

loose wires

Mounted on top of double door

DBs

Textured finish, powder coated


9/208

Vector enclosures - IP65

Golf enclosures - IP41

Busbars Terminals

Connection Devices

mounting enclosures

Available in 1, 2 & 3 row 4 to

36 modules

Made of insulating material -

Polystyrene

Reversible opaque or

transparent door can be ?tted

with a key lock

Aesthetic design ideal for

domestic or light commercial

installations

IP41 flush and surface

IP65 surface mounting

enclosure

Available in 1 to 4 row

versions, from 3 to 54 modules

Door is reversible and can be

locked

Adjustable DIN Rail

Transparent hinged cover /

door

Insulated fork busbars are

rated to 63A and are available

in 1,2,3 and 4 Pole versions for

devices with bi-connect facility

Insulated prong busbars are

rated to 63A and are colour

coded for SPN MCBs devices

Enable safe and fast

connection of 1 to 4 pole

devices by a common busbar

system

End caps available for 2P, 3P& 4P busbars to avoid tracking

between phases

can be used where additional

connection is required when

more than one residual current

device is being used

Can be used as additional

earth bar

Single mod terminal block rated

100A

Din rail mounted neutral bar



10/209

Miniature circuit breakers (0.5 to 63A)

Modular circuit breakers (80 to 125A)

Residual current circuit breakers (RCCBs)

Protection Devices

Low let-through energy

(class 3) to ensures best

possible protection to cables &

wires

Two position din rail clips

allows fast installation

Windows at the sides of MCB

enable auxiliaries and earth

leakage add-on be ?tted at site

providing additional protection

and control

Suitable for DC applications -

1 pole upto 60V, 2 poles in

series upto 125V

6-40A SPN MCB available in 1

module size, breaking capacity

6 kA (IEC 60898-1), tripping

curve - C

Low thermal power loss

Terminal capacity : 70 sq mm

rigid cable - 50 sq mm with

speci?c cable end-caps

Front product labelling for

circuit identi?cation

KEMA approval, according to

IEC60898-1 and IEC60947-2

standards

Protection against nuisance

tripping i.e. Hager RCCBs are

protected against transient

voltages (lightening, inductive,

switching etc.)

Earth fault indicator for

indication of tripping on fault

Positive contact indicator

Pull up insulated terminal with

IP20 Protection

circuits against overloads &

short-circuits in domestic,

commercial & industrial

electrical distribution systems

Available in 1-4 pole, 0.5 to63A with type B, C or D

tripping characteristics

Positive contact indicator to

show actual status of contacts

Touch proof terminals - (IP20)

protect against direct contact

Bi-connect facility i.e. cable

and busbar can be terminated-

separately allowing fast & safe

connection

Conform to the latest version

of the standards IEC 60898-1 /

IEC 60947-2 / IS 8828 - 1996

Provide protection & control of

and industrial applications

80, 100 and 125A MCB's are

available in 1/2/3/4 pole

versions

Terminal clamping jaws to

improve cable grip

Touch proof terminals - (IP20)

protect against direct contact

For use in large commercial

Protects against fatal electric

shock

Opens the circuit automatically

in the event of an earth

leakage

Available in 25, 40, 63 & 100A

with 30mA, 100mA, & 300 mA

sensitivity in 2P & 4P version

Conforms to IEC 61008


11/20


12/2011

RCD add-on blocks

Earth leakage relays

Surge protection devices

Available in 2 & 4 Pole with

sensitivities 30mA, 100mA

& 300mA

Breaking capacity of

combined unit 10kA

conforming to IEC 60898-1 /

IEC 60947-2


tripping

Also available in adjustable

sensitivity with adjustable time

delay.


tripping

Detection torroids which link

with relay are available in

circular (35mm to 70mm)cross - section

Protection Devices

right side of 2 & 4 Pole MCBs

The combined unit provides

protection against overload,

short - circuit & earth leakage

Current Rating 25A, 40A &

63A for use with NB, NC & ND

MCBs

Designed to be fitted to the

monitoring of earth leakage

currents

It trips in the event of a break

in relay / core link

Positive reset is required after

a fault is detected

Available with either fixed(30mA & 300mA)

or adjustable sensitivity

(30/100/300mA/1A, 3A)

The relay ensures the

transient voltage surges

caused by lightning strikes or

switching of motors,

transformers etc.

The device functions by

creating a link between mains

& earth during surge peaks &

the link allows the current to be

channeled safely to earth

Type 1 devices are used to

protect against direct lightningsurges and are tested for

lightning current waveform of

10/350s

Type 2 devices are used for

indirect lightning effects as well

Protect equipments against as switching surges & are

tested for a current waveform

of 8/20s

Type 2 devices are available

with reserve indicator as well

auxiliary contact for remote

indication

Replacement cartridges for

Type 2 products are also

available

Back up protection with

fuse/MCB/MCCB of speci?edrating is recommended

SPDs do not replace lightning

rod but are complementary


13/2012

2-way / center-off changeover switches

Modular electromechanical/digital time switch

Automation and control devices

nector in all types of circuit

AC 22A utilization category

Available in 2, 3 & 4 pole

versions with ratings from 25A

to 100A

Suitable for DC application

110V - 2 pole in series

For use as a switch discon-

Isolating switches

over from one source of supply

to another with center-off

position

AC 21A utilization category

Available in 2 pole 25 & 40A

and 4 pole 40A versions

Suitable for use on 110V DC

2 Pole in series

These devices allow change-

switches for hourly, daily and

weekly programming

These can be used to control

lighting, heating, ventilation,

household appliances etc.

Minimum switching time - 15

min. for daily dial and 2 hrs. for

weekly dial

1 & 2 channel quartz time All time switches are rated for

16A 240V AC1 and have

supply failure reserve upto 200

hrs.

Digital time switches are in 1 &

2 channel daily, 1 channel-

weekly, 5-20 pre-recorded

adjustable programmes

Operating reserve 5 years


14/2013

Twilight switches

Modular contactors


The device controls lighting

circuits with automatic switch-

off after a pre-set time

Time delay is adjustable from

24 sec. to 12 min.

Rated for 16A-250V AC1 & is

suitable for use with push

buttons only

Pre-warning device to be used

with simple time lag switch

dims lights to 50% for 24 sec.

before final switch off

Time lag switches

photoelectric cells which

measures the light level, and in

conjunction with the relay

provides on/off control of

lighting circuit (in relation to

natural light)

They can be used in street

lighting, display lighting,

illuminated signs, showrooms

etc.

They come in 2 sensitivity

ranges : 5 to 100 lux and 50 to

2000 lux

The devices are controlled by EE100 twilight switch available

with surface cell

EE110 available with one daily

time-switch incorporated in

same unit

EE702 available for outdoor

use with IP55 protection EE702 : twilight switch with

sensitivity range 2 to 1000 lux

and time delay 1 sec to 120 s

switching and control of power

circuits

Available in current ratings

from 20 to 63A in 2NO, 3NO,

3NO + 1NC & 4NO versions

All Contactor rating for AC 1

loads only and if the load

differs from AC1, the contactor

may need derating

Auxiliary contact 1 NO + 1NC

available

Can be used for remote

Multifunction time Lag switch

with 4 functioning mode:

- simple timer 30 sec. to 10 min

- timer with switch-off pre-

warning

- timer with double pre-set 30

sec. to 10 min + 1hr by long

push (> 3 sec.)

- timer with double pre-set

switch-off pre-waming


15/2014

Latching relays

Push buttons

Indicator lights


circuits in buildings

Latching relays operate when

impulsed with a signal voltage,

first impulse sets the relay to

its set (opposite) state & next

impulse returns it to its re-set

(original) state

230V / 16A with 230V AC coil

available in 1NO, 2NO, 1NO +

1NC, 2NO + 2NC and 4 NO

versions

Used for control of lighting Auxiliaries for centralized

control, remote signaling,

multileveled centralized control

and maintained contact and

maintained contact available

buttons rated 16A with or

without indicator light have

option of 1NO, 2NO or 1NO +

1NC contact

These are used to actuate

loads either directly or via

contactors

New design with front product

labelling

Latching or impulse push

and blue

LED technology ensures long

life

New design with front product

labelling

Available in red, green, orange


16/2015

Modular bells and buzzers

Thermostats

Dimmers and dimming systems

Can be used in distribution

boards

Audio output - 85 & 78 DB

230V AC, 6.5VA

For audio signals in buildings

used for any application

requiring temperature control

(-30C up to 60c)

In case of probe

disconnection, 3 working mode

selected by wiring arepossible:

- permanent off

- permanent on

- cyclic operation:

1 minute in every 4 minutes

The position of the relay is

Electronic Thermostats can be

domestic and commercial

installation

230V incandescent, 230V

halogen with standard or

electronic ballast and

fluorescent lamps with

electronic ballast can be

dimmed

Stand alone dimmers available

upto 600W and 1000W

Control of lighting levels in Control localized or remote by

associated push buttons

Soft start to increase lamp life

expectancy

Setting of minimum and

maximum levels in some

dimmers are possible

Dimmer systems incorporating

master and slave dimmers canbe used 30000W



17/2016

Analogue voltmeters

Analogue ammeters

Selector switches for voltmeters & ammeters


Installations

Range 0-500V

Single phase: direct

connection

Three phase: use of voltmeter

selector switch

Accuracy : 2%

For domestic & commercial

Installations

Available in various ranges up

to 250A

Direct reading: 0-30A

Via current transformer: 0-50,100, 150, 250A

Accuracy : 2%

For domestic & commercial

Voltmeter selector switch gives

3 readings between phases

and 3 readings between phase

& neutral

Ammeter selector switch gives

3 phase readings


18/2017

Note


19/2018

Note


20/20

REGISTERED OFFICE ANDHEAD OFFICEL&T House, Ballard EstateP. O. Box 278Mumbai 400 001Tel: 022-6752 5656

Fax: 022-6752 5858Website: www.Larsentoubro.com

ELECTRICAL STANDARD PRODUCTS (ESP)501, Sakar Complex IOpp. Gandhigram Rly. StationAshram RoadAhmedabad 380 009Tel: 079-66304007-11Fax: 079-26580491e-mail: [email protected]

38, Cubbon Road, Post Box 5098Bangalore 560 001Tel: 080-25020100, 25593613Fax: 080-25580525

e-mail: [email protected]

131/1, Zone IIMaharana Pratap NagarBhopal 462 011Tel: 0755-4233906, 4233907Fax: 0755-2769264e-mail: [email protected]

Plot No. 559, Annapurna ComplexLewis RoadBhubaneswar 751 014Tel: 0674-6451342, 2436696Fax: 0674-2537309e-mail: [email protected]

SCO 32, Sector 26-DMadhya Marg, P. O. Box 14Chandigarh 160 026Tel: 0172-4646841 to 7Fax: 0172-4646802e-mail: [email protected]

10, Club House RoadChennai 600 002Tel: 044-28462072 / 4 / 5Fax: 044-28462102e-mail: [email protected]

67, Appuswamy RoadPost Bag 7156Opp. Nirmala CollegeCoimbatore 641 045Tel: 0422-2588120 / 1 / 5Fax: 0422-2588148e-mail: [email protected]

Product improvement is a continuous process. For the latest information and special applications, please contact any of our offices listed here.

Electrical Standard Products (ESP) Branch Offices:

L&T House, Group MIG - 5PadmanabhpurDurg 491 001Tel: 0788-2213833 / 14 / 28 / 29Fax: 0788-2213820

A1/11, Astronauts AvenueBidhan NagarDurgapur 713 212Tel: 0343-2536891 / 8952 / 7844Fax: 0343-2536493e-mail: [email protected]

Milanpur Road, Bamuni MaidanGuwahati 781 021Tel: 0361-2651297Fax: 0361-2551308e-mail: [email protected]

II Floor, Vasantha Chambers5-10- 173, Fateh Maidan RoadHyderabad 500004Tel: 040-66720250

Fax: 040-23296468e-mail: [email protected]

D-24, Prithvi Raj Road, C-SchemeJaipur 302 001Tel: 0141-2385913 / 19Fax: 0141-2373280e-mail: [email protected]

Akashdeep Plaza, 2nd FloorP. O. GolmuriJamshedpur 831 003JharkhandTel: 0657-2340864Fax: 0657-2341250e-mail: [email protected]

Skybright Bldg. M. G. RoadRavipuram Junction, ErnakulamKochi 682 016Tel: 0484-4409420 / 427Fax: 0484-4409426e-mail: [email protected]

3-B, Shakespeare SaraniKolkata 700 071Tel: 033-44002572 / 3 / 4Fax: 033-22822589e-mail: [email protected]

A28,Indira Nagar, Faizabad RoadUttar Pradesh,Lucknow 226 016Tel: 0522-2312904 / 5 / 6Fax: 0522-2311671e-mail: [email protected]

Plot No. 5184th Main RoadK. K. NagarMadurai 625 020Tel: 0452-2537404, 2521068Fax: 0452-2537552

e-mail: [email protected]

EBG North Wing Office - 2Powai CampusMumbai 400 072Tel: 022-67052874 / 2737 / 1156Fax: 022-67051112e-mail: [email protected]

8B, FarmlandRamdaspethBehind Hotel RadhikaNagpur 440 010Tel: 0712-2420641 / 24Fax: 0712-2420619e-mail: [email protected]

32, Shivaji MargP. O. Box 6223New Delhi 110 015Tel: 011-41419500 / 1, 41419515Fax: 011-41419600e-mail: [email protected]

L&T HouseP. O. Box 119191/1, Dhole Patil RoadPune 411 001Tel: 020-26135048, 26135611Fax: 020-26129586, 26124910e-mail: [email protected]

3rd FloorVishwakarma Chambers

Majura Gate, Ring RoadSurat 395 002Tel: 0261-2473726Fax: 0261-2477078e-mail: [email protected]

Radhadaya ComplexOld Padra RoadNear Charotar Society

Vadodara 390 015Tel: 0265-6613610 / 11 / 12Fax: 0265-2336184e-mail: [email protected]

48-8-16, DwarakanagarVisakhapatnam 530 016Tel: 0891-6620411-4Fax: 0891-6620416e-mail: [email protected]

Electrical Standard Products

Larsen & Toubro Limited

Powai Campus, Mumbai 400 072

Tel: 022-67050505

Fax: 022-67051746

E-mail: [email protected]

Website: www.LNTEBG.com

Documents

Hager for LT