Upload
tranthu
View
236
Download
2
Embed Size (px)
Citation preview
420
470 (620)*
200 (350)*
60
960
420
15**
150
** 75% tonnage limitation * (Long Stroke)
200 100
10
100
180
Description
Capacity
Beam Length
Table width
Distance between frame
Throat depth
Open Height
Stroke
Working height
Oil Capacity
Power consumption
Approach speed
Maximum bending speed
Return speed
Total Length
Total Width
Total Height
Total Weight
5020
500
2090
1665
55
4
3340
2450
2450
4600
Units HFE3i
kN
mm
mm
mm
mm
mm
mm
mm
liter
kW
mm/s
mm/s
mm/s
mm
mm
mm
kg
8025
800
2570
2125
90
7.5
3800
2445
2540
5600
1003
1000
3110
2705
110
7.5
4385
2430
2680
6600
1303
1300
3140
90
2700
150
11
4440
2625
2815
8150
1703
1700
3170
2700
235
15
4470
2625
2900
11600
1704
1700
4230
3760
235
15
5530
2625
2890
13900
2203
2200
3170
2700
295
18.5
4470
2625
2900
13750
2204
2200
4280
3760
295
18.5
5560
2625
3085
17100
Unit : mm
L
W
H
L
� HFE3i (L) x (W) x (H)
� Machine specifications*
April 2014
E053-EU01en
For Your Safe UseBe sure to read the operator’s manual carefully before use.
� When using this product, appropriate personal protection equipment must be used.
* Specifications, appearance and equipment are subject to change without notice by reason of improvement.* The official model name of machine described in this catalog is HFE3i SERIES. Use the registered model name when you contact the authorities for applying for installation, exporting, or financing.
Hazard prevention measures are removed in the photos used in this catalogue.
©AMADA EUROPE HQ. All Rights Reserved.
BendingBending
5020, 8025, 1003, 1303, 1703, 1704, 2203, 2204
� Machine Dimensions
Total time62% time reduction
all your bending needsBuilt on the solid foundation of the HFE series, Amada’s HFE3i press brake models include additional production-enhancing features and an innovative touch-screen AMNC3i interface.18.5” multi-touch display offers multiple modes of data entry (angle, depth, 2D and 3D) for ultimate programming flexibility.A user-friendly graphic interface and tool library assist operators in the quick setup of complicated parts.
Complete range to cover
59 min
156 min
Material: MS 1.0mmDimension: 189 x 99 x 50mm
Material: MS 0.8mmDimension: 99 x 86 x 22mm
Time saving from coining mode usage71% time reduction
Time saving from Bi-S usage62% time reduction
14 min
37 min
Material: MS 0.8mm, 1.0mm, 5.0mmDimension: 240 x 142 x 172mm
“COMMON TOOL LAYOUT” by automatic software.Example: One layout for 4 workpieces
“ONE STROKE TOOL”One layout for different thickness assembly
5.0t1.0t
0.8t
Typical Processing Samples(productivity comparison with a conventional machine)Typical Processing Samples(productivity comparison with a conventional machine)
HFE3i
Conventionalmachine
HFE3i
Conventionalmachine
HFE3i
Conventionalmachine
*Photograph includes optional equipment16 min
44 min
Total time62% time reduction
all your bending needsBuilt on the solid foundation of the HFE series, Amada’s HFE3i press brake models include additional production-enhancing features and an innovative touch-screen AMNC3i interface.18.5” multi-touch display offers multiple modes of data entry (angle, depth, 2D and 3D) for ultimate programming flexibility.A user-friendly graphic interface and tool library assist operators in the quick setup of complicated parts.
Complete range to cover
59 min
156 min
Material: MS 1.0mmDimension: 189 x 99 x 50mm
Material: MS 0.8mmDimension: 99 x 86 x 22mm
Time saving from coining mode usage71% time reduction
Time saving from Bi-S usage62% time reduction
14 min
37 min
Material: MS 0.8mm, 1.0mm, 5.0mmDimension: 240 x 142 x 172mm
“COMMON TOOL LAYOUT” by automatic software.Example: One layout for 4 workpieces
“ONE STROKE TOOL”One layout for different thickness assembly
5.0t1.0t
0.8t
Typical Processing Samples(productivity comparison with a conventional machine)Typical Processing Samples(productivity comparison with a conventional machine)
HFE3i
Conventionalmachine
HFE3i
Conventionalmachine
HFE3i
Conventionalmachine
*Photograph includes optional equipment16 min
44 min
Bi-S
4 5
Bi-S & Bi-L
New back gauge system
Easy Operation1
HFE3i Series New Technology
AMNC3i
Multi-touch LCD panel with a user-friendly design provides intuitive smartphone like operation.
The 18.5 inch vertical display means you can view all the necessary program and bend information.
The 5 axis back gauges have a tool navigation system whereby
the finger indicates the precise position to place the tools.
The Delta X finger is a useful feature when bending asymmetrical
work pieces.
The Eco drive system continually monitors and self-adjusts
bending requirements — providing benefits such as 20% less
energy usage, reduced maintenance, less oil consumption, lower
noise levels, and increased reliability.
2
3
DIGIPRO
The Amada Digipro is a highly-accurate, electronic
angle measuring device that transmits the
measured angle wirelessly to the press brake’ s
NC.
The measured angle value is transmitted to the NC
and the program is automatically
corrected as required, providing a precise bend
angle.
Angle control and Angle measuring system
Back gauge and Eco drive systems
Automatic angle adjustment ensures highly
accurate bending even when material thickness
and properties vary from part to part.
Removes the need fo r t es t bend ing and
adjustment of the initial bend angle, eliminating
scrap and reducing setup time.
Bi-L
Bi-S
4 5
Bi-S & Bi-L
New back gauge system
Easy Operation1
HFE3i Series New Technology
AMNC3i
Multi-touch LCD panel with a user-friendly design provides intuitive smartphone like operation.
The 18.5 inch vertical display means you can view all the necessary program and bend information.
The 5 axis back gauges have a tool navigation system whereby
the finger indicates the precise position to place the tools.
The Delta X finger is a useful feature when bending asymmetrical
work pieces.
The Eco drive system continually monitors and self-adjusts
bending requirements — providing benefits such as 20% less
energy usage, reduced maintenance, less oil consumption, lower
noise levels, and increased reliability.
2
3
DIGIPRO
The Amada Digipro is a highly-accurate, electronic
angle measuring device that transmits the
measured angle wirelessly to the press brake’ s
NC.
The measured angle value is transmitted to the NC
and the program is automatically
corrected as required, providing a precise bend
angle.
Angle control and Angle measuring system
Back gauge and Eco drive systems
Automatic angle adjustment ensures highly
accurate bending even when material thickness
and properties vary from part to part.
Removes the need fo r t es t bend ing and
adjustment of the initial bend angle, eliminating
scrap and reducing setup time.
Bi-L
HFE3iHFP
Dr ABE Bend automatically selects tools,
creates tool layouts and bend sequences.
The AMNC3i control uses offline programs to reduce setup time and increase machine efficiency.
Auto Batch ModeCAM software make programs without operator intervention.
Common Tool layout CAM software utilises a common tool layout for a maximum of 99 parts.
Workshop
SheetWorks for Unfold3D solid sheet metal
CAD system
Dr.ABE seriesfully automaticCAM system
ASIS100PCLSheet metal processing
Network system
SDD
AP100Network-ready
automatic programmingunit
vFactoryVirtual factory
management system
Office
6 7
Manual Grip
- Front installation / front removal.
- Close the space between Grips.
- Manual rear plate (option).
Pneumatic auto Grip- Front installation / front removal. - Automatic pull up function. - Easy to reposition and remove Grips.- Manual rear plate (option).- Close the space between Grips.- No tubes on rear side.
Hydraulic tool holder
- Front installation / front removal. - Easy setting of complicated tool layouts. - No tubes on rear side.
Finger pin
- Flexible position with pin exchange.
Additional finger shapes
- Uses special shaped fingers for flexible gauging positions.
Sensor fingers
Eliminates gauging errors.Sensor pauses the bend process when the part is separated from the gauge.
Front support
- Front workpiece support.
Sheet follower
- Improves accuracy and safety. - Assists the operator.- Eliminates the need for a second operator.
LED light (rear)
- An LED light is installed to the Rear side of the upper
beam
Hand wheel
- Adjust all axis.- Easy and flexible manual adjustments.
Bending CAM software Digital Manufacturing with Amada VPSS
Bar code reader
- Built-in bar code reader.- Eliminates program search time and errors.
Safety device
Laser beam type (AKAS III P)
Light curtain type (SICK)
Amada proposes digital
manufacturing using VPSS
(Virtual Prototype Simulation
System). All data is created
in the office and utilised in
the workshop via a network.
Functions (Optional Equipment) options
HFE3iHFP
Dr ABE Bend automatically selects tools,
creates tool layouts and bend sequences.
The AMNC3i control uses offline programs to reduce setup time and increase machine efficiency.
Auto Batch ModeCAM software make programs without operator intervention.
Common Tool layout CAM software utilises a common tool layout for a maximum of 99 parts.
Workshop
SheetWorks for Unfold3D solid sheet metal
CAD system
Dr.ABE seriesfully automaticCAM system
ASIS100PCLSheet metal processing
Network system
SDD
AP100Network-ready
automatic programmingunit
vFactoryVirtual factory
management system
Office
6 7
Manual Grip
- Front installation / front removal.
- Close the space between Grips.
- Manual rear plate (option).
Pneumatic auto Grip- Front installation / front removal. - Automatic pull up function. - Easy to reposition and remove Grips.- Manual rear plate (option).- Close the space between Grips.- No tubes on rear side.
Hydraulic tool holder
- Front installation / front removal. - Easy setting of complicated tool layouts. - No tubes on rear side.
Finger pin
- Flexible position with pin exchange.
Additional finger shapes
- Uses special shaped fingers for flexible gauging positions.
Sensor fingers
Eliminates gauging errors.Sensor pauses the bend process when the part is separated from the gauge.
Front support
- Front workpiece support.
Sheet follower
- Improves accuracy and safety. - Assists the operator.- Eliminates the need for a second operator.
LED light (rear)
- An LED light is installed to the Rear side of the upper
beam
Hand wheel
- Adjust all axis.- Easy and flexible manual adjustments.
Bending CAM software Digital Manufacturing with Amada VPSS
Bar code reader
- Built-in bar code reader.- Eliminates program search time and errors.
Safety device
Laser beam type (AKAS III P)
Light curtain type (SICK)
Amada proposes digital
manufacturing using VPSS
(Virtual Prototype Simulation
System). All data is created
in the office and utilised in
the workshop via a network.
Functions (Optional Equipment) options
420
470 (620)*
200 (350)*
60
960
420
15**
150
** 75% tonnage limitation * (Long Stroke)
200 100
10
100
180
Description
Capacity
Beam Length
Table width
Distance between frame
Throat depth
Open Height
Stroke
Working height
Oil Capacity
Power consumption
Approach speed
Maximum bending speed
Return speed
Total Length
Total Width
Total Height
Total Weight
5020
500
2090
1665
55
4
3340
2450
2450
4600
Units HFE3i
kN
mm
mm
mm
mm
mm
mm
mm
liter
kW
mm/s
mm/s
mm/s
mm
mm
mm
kg
8025
800
2570
2125
90
7.5
3800
2445
2540
5600
1003
1000
3110
2705
110
7.5
4385
2430
2680
6600
1303
1300
3140
90
2700
150
11
4440
2625
2815
8150
1703
1700
3170
2700
235
15
4470
2625
2900
11600
1704
1700
4230
3760
235
15
5530
2625
2890
13900
2203
2200
3170
2700
295
18.5
4470
2625
2900
13750
2204
2200
4280
3760
295
18.5
5560
2625
3085
17100
Unit : mm
L
W
H
L
� HFE3i (L) x (W) x (H)
� Machine specifications*
April 2014
E053-EU01en
For Your Safe UseBe sure to read the operator’s manual carefully before use.
� When using this product, appropriate personal protection equipment must be used.
* Specifications, appearance and equipment are subject to change without notice by reason of improvement.* The official model name of machine described in this catalog is HFE3i SERIES. Use the registered model name when you contact the authorities for applying for installation, exporting, or financing.
Hazard prevention measures are removed in the photos used in this catalogue.
©AMADA EUROPE HQ. All Rights Reserved.
BendingBending
5020, 8025, 1003, 1303, 1703, 1704, 2203, 2204
� Machine Dimensions
AMADA UNITED KINGDOM LTD.Spennells Valley Road, Kidderminster,Worcestershire DY10 1XS United KingdomTel: +44 (0)1562 749500 Fax: +44 (0)1562 749510www.amada.co.uk
AMADA GmbHAmada Allee 1 42781 Haan - GermanyTelefon: +49 (0)2104 2126-0 Fax: +49 (0)2104 2126-999www.amada.de
AMADA SAParis Nord II96, avenue de la PyramideF-93290 Tremblay - FranceTél : +33 (0)149903000Fax: +33 (0)149903199www.amada.fr
AMADA ITALIA S.r.l.Via Amada I., 1/329010 Pontenure (PC) - ItaliaTel: +39 (0)523-872111 Fax: +39 (0)523-872101www.amada.it