H-Flex Steam Liner Flexitank Heating Method Introduction

What is H-Flex Steam Liner?…

Patented by LiquA, H-Flex Steam Liner is the first and only, flexitank total heating system in the industry. The old heater pad technology is left behind

with this revolutionary method.

H-Flex Steam Liner is a chamber to preserve and circulate steam all around the flexitank, bottom, center and top.

Working Principle…

Up to 4 bars, 130 °C steam is to be applied into the Steam Liner. The steam distributor circulates the steam all

around the flexitank surface and heats the cargo with high transmission rate. Eventually steam condenses to cold water by transmitting its whole heat/energy to the cargo. 130°C steam condenses to 20°C water. To increase efficiency, the cold water is being discharged during the heating process. In a nut shell; Steam is being well distributed all over the total surface of the flexitank. Bottom, top and the core. Steam not only heats the cargo but also insulates it from the metal side walls of the container, which is the

main cause of the energy loss. This feature increases the heating performance and shortens the heating operation.

Steam

Steam Liner

Grids Steam

Cold water

Working Principle…

Plastic Grids elevate the flexitank to generate a gap/tunnel underneath the flexitank for efficient steam distribution. The Steam Distributor distributes the steam through the grid tunnels directly to the critical points. Center and front end…

Features & Advantages…

The first and only flexitank that;

27,000 LT Capacity Guaranteed not to bulge the sidewalls of the container Does Not require bulkhead Patented, harnessed, wave breaking design

27,000lt capacity of the flexitank makes it possible to transport 3,000lt

more per container creating a savings of 12% on overall freight cost.

Features & Advantages…

Advanced technology steam heating at the final destination, up

to 20 times faster compared to

conventional heating pads. Direct and efficient heat

transmission to the entire cargo. Steam circulation all around, bottom, center & top surface of the flexitank.

Case Study The Liqua H-Flex & a conventional flexitank containing the same product (palm stearin) were heated side by side. The Liqua H-flex Steam Liner fully heated all the product & was

completely discharged in 18 hours.

The conventional flexitank with heating pad fully heated &

discharged in 14 days.

Features & Advantages…

Patented heat transmission method providing faster melting. Faster discharge lowering demurrage costs. Optional; possibility to circulate the cargo within the flexitank through

double valved versions for non-homogenous, sedimenting cargos.

Heat & Discharge…

Introduce steam to the Steam Liner at the final destination and when the cargo liquefies, discharge as a regular flexitank.

Environmental Friendly…

Thanks to advanced steam heating technology, H-Flex Steam Liner ensures minimum residue and energy consumption compared to any other alternative solutions. Eco-friendly and fully recyclable raw materials. Less carbon footprint.

Up to 20 times shorter heating time. Less energy consumption. Low residue for recycling.

Network…

Thanks to our worldwide network, we offer you a solution satisfying technical & logistic requirements of both shipper and consignee with a

custom made packaging.

We trust, this new opportunity will help you to develop new business and feel more secure…

…Think Outside the Box…