Guitar Pedal Settings

7/29/2019 Guitar Pedal Settings

http://slidepdf.com/reader/full/guitar-pedal-settings 1/4

Pedal Settings.

Heavy Metal

Devices Used: I play through an ibanez ax7221, a randall rg100, and the boss metal zone

Sound Description: NOTE: this is a heavy assed sound that my metal band plays under. Get more from theWeb.

Settings: randall rg100:-gain = level 2-low = level 3.75-mid = level 5.5-high = level 7.5-master = level 2

metal zone:-gain = 10 o'clock-low = 4 o'clock-high = 1 o'clock-mid freq = 2.5 o'clock-mid = 2.5 o'clock-dist = 10 o'clock

Agressive Metal

Devices Used: Ibanez Rg170 Crate GFX20...I cant afford anything big Boss MT-2 Metalzone...If youdidnt no that shot yourself

Sound Description: Agressive metallicaish type metal - GREAT MUTES

Settings: High: all the way upLow: all the way upMid Freq: NONEMid: 5 o'clockDist. All the way up

OR

High: all the way upLow: 3 o;clockMid Freq: NONEMid: 5 o'clockDist. All the way up

Agressive Metal

Devices Used: I use my Marshall G30RCD and the Ibanez RG270. And the Metal Zone of course ;).

Sound Description: I use this setting for agressive metal. Actually it sounds great!!!

Settings:



On the MT-2:Level: 12 oclockLow: all the way upHigh: 3 oclockMid. Freq.: 4 oclockMiddle: 4 oclock

Dist: 11 oclock

On the Amp:Channel: CleanBass: all the way upTrebble: 3 oclock

Heavy Metal Distortion

Devices Used: I use a Digitech Whammy, into the Metal Zone, into a Dunlop Wah, to my crappyPeavey Rage 158 amp. This setting is just forthe metal zone though.

Sound Description: This gets a good all around heavy metal sound good for Slayer, old Metallica, Pantera,etc...

Settings: Turn the Level knob to wherever you want it. (up a lot is good)

Turn the Low knob all the way up. Turn the High knob to 3 o'clock. Turn the Mid Freqknob to about 1 o'clock. Turn Middle to about 11 o'clock. For a more death metaldistortion you can turn Middle all the way down and play with the Mid Freq knob to findwhat you like.

Trash Metal

Devices Used: Jackson DK-2, Marshall JCM-900 model 4500 Head + Marshall 1960 Lead 4x12Celestion cabinet, Boss CH-1, Boss Ge-7, Dunlop Crybaby GCB95 Wah-Wah

Sound Description:

Settings: This settings are for a fantastic trash metal sound like a bit like 'Kill 'em All' fromMetallica.

Settings: MT-2 settings:High : 12 o'clockLow : 3 o'clockMiddle : 8 o'clockMid. Freq. : 10 o'clockDist : 12 o'clock

Amp settings:I Use Channel APresence : 5Bass : 8Middle : 2

Treble : 6

Slayer and Metallica Sound



Devices Used: I gotta kh-2 and a jackson "v" series i use a mesa boogie amp ( half stack ) i also gottachorus pedal to gimme some wacked out sounds and EQ pedal to gimme excellanttone

Sound Description: heavy very heavy

Settings: level: at least 12:00high: 3:00low:all the way upmid: all the way downmid frequency:about 1:00 (exactly across from the mid.)

Heavy Metal

Devices Used:

Marshall VS100R 1x12 combo amplifier and Epiphone Special II Model

Sound Description: The heaviest distortion I could get out of this box. Switch inbetween your neck andbridge pickup, both sound good, just one might be more of what your after. Soundslike Metallica.

Settings: Level : Anything, but a higher level gives for better sounding distortion on this boxLow : MaxMid : 0High : MaxMid Frequency : 12 o'clock

Distortion : Max

Killer Metal

Devices Used: Marshall Valvestate VS100R, Fender Strat with Duncan Hotrails Pickup in front and rearposition

Sound Description: Fit for both Thrash and Classic metal.

Settings: Marshall Valvestate VS100ROD2 channeltone controls & contour : 12o'clockgain : 7 o'clock? (not to overdrive)reverb & master : as you wishpower dimension : off

MT2Level : 1 o'clockBass : 3 o'clockTreble : 1 o'clockMid Freq : 1 o'clock

Mid : 12:30Dist : 11 o'clock



Metallica Sound

Devices Used:

Sound Description:

General Metallica Sound.

Settings: Level : 10'o clockHigh : 10'o clockLow : 5'o clockMiddle : 5'o clockMid Freq : 5'o ClockDist : 1'o clock

Documents

Guitar Pedal Settings