Upload
duongque
View
250
Download
4
Embed Size (px)
Citation preview
GS-Series
VDI 30/40 & Vertical Turret Top Plates Tooling Catalog
GS 42 GS 51
GS 150 GS 200
GS 200/66-L GS 250-L GS 200/66
GS 250
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
2
Index
Content(s) Page VERTICAL TURRET TOP PLATES 3 Round Shank Tool Holders GS/Vertical Style Top Plate 4 (Coolant Through Face of Holder and Through Tool) Round Shank Tool Holders GS Vertical Style Top Plate 5 (Coolant Through Tool) Round Shank Tool Holders GS/SV Vertical Style Top Plate 6 (Coolant Through Face of Holder) Square Shank Tool Holders GS/SV Vertical Style Top Plate Face Working Holder (Coolant Through Face of Holder) 7 Square Shank Tool Holders Clamp Blocks for 8 GS/SV Vertical Style Top Plates Bushings 9-11 Accessories 12 VDI 30/40 TOP PLATES 13 VDI Blank Turret Plug 14 Tool Holder Right Short (Form B1) 15 Tool Holder Right Short (Form B3) 16 Tool Holder Right LONG Form B5 17 Tool Holder Right LONG Form B5 18 Tool Holder Axial Right Form C1 19 Tool Holder Axial Right Overhead (Form C1 20 U-Drill Holder with Internal Coolant (Form E1) 21 Boring Bar Holder (Form E2) 22 Collet Chuck (Form E4) Uses ER Style Collets 23 VDI 30 Axial Drilling and Milling Head with External Coolant 24 VDI 40 Axial Drilling and Milling Head with External Coolant 24 VDI 30 Radial Drilling and Milling Head with External Coolant Supply 25 VDI 40 Radial Drilling and Milling Head with External Coolant Supply (Short Body) 26 VDI 40 Radial Drilling and Milling Head with External Coolant Supply (Long Body) 27 VDI 30 Drilling and Milling Head Angle Adjustable +/-90° 28 Collets and Bushings 29-32
All Tool Holders Styles and Specifications are subject to change without notice.
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
3
Vertical Turret Top Plates
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
4
Round Shank Tool Holders GS Vertical Style Top Plate Coolant Through Face of Holder and Through Tool
Part Number A B C D
TBA 1.181 5/8" 1.181 2.953"
TBA 1.181 3/4" 1.181 2.953"
TBA 1.181 1.000" 1.181 2.953"
TBA 1.181 1-1/4" 1.181 2.953"
Part Number A B C D
BL 001194440CK 1.5748 1-1/2" 1.5748 3.543"
BLA 0001194484J 1.5748 3/4" 1.5748 3.543"
BLA 0001194485J 1.5748 1.000 1.5748 3.543"
BLA 0001194486J 1.5748 1-1/4" 1.5748 3.543"
A
B
D
.138”
C
GS 200/66 / GS250, GS 200/66L / GS 250L Lathes with Vertical Style Top Plates
Used on all GS150 / GS 200 / GS 42 / GS 51 Lathes with Vertical Style Top Plates
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
5
Round Shank Tool Holders GS Vertical Style Top Plate
Coolant Through Tool
Part Number A B C D
BL 001194486AK 1.181 5/8" 1.181 2.953" / 75mm
BL 001194485AK 1.181 3/4" 1.181 2.953" / 75mm
BL 001194484AK 1.181 1.000" 1.181 2.953" / 75mm
BL 001194440AK 1.181 1-1/4" 1.181 2.953" / 75mm
A
B
C D
.138
Used on all GS150 / GS 200 / GS 42 / GS 51 Lathes with Vertical Style Top Plates.
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
6
Round Shank Tool Holders GS Vertical Style Top Plate Coolant Through Holder Face
Part Number A B C D
BL 001194480AK 1.181 5/8" 1.181 2.953" / 75mm
BL 001194479AK 1.181 3/4" 1.181 2.953" / 75mm
BL 001194478AK 1.181 1.000" 1.181 2.953" / 75mm
BL 001194439AK 1.181 1-1/4" 1.181 2.953" / 75mm
Part Number A B C D
BL 001194480JK 1.5748 1-1/4" 1.5748 3.543"
TBA 1.5748 3/4" 1.5748 3.543"
B
C D
A
Used on all GS 200/66 / GS250, GS 200/66L / GS 250L Lathes with Vertical Style Top Plates
Used on all GS150 / GS 200 / GS 42 / GS 51 Lathes with Vertical Style Top Plates
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
7
Square Shank Tool Holders GS Vertical Style Top Plate
Face Working Holder Coolant Through Holder Face
Part Number A B C
BL 00119441AK 1-1/2" 1.181 0.748
Part Number A B C
TBA 2.000" 1.5748" 1.000"
Used on all GS150 / GS 200 / GS 42 / GS 51 Lathes with Vertical Style Top Plates. Uses either Right or Left Hand ¾” Tools.
Used on all GS 200/66 / GS250, GS 200/66L / GS 250L Lathes with Vertical Style Top Plates. Uses either Right or Left Hand 1” Tools.
Spindle Centerline
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
8
Square Shank Tool Holders Clamp Blocks for GS Vertical Style Top Plate
Used on all, GS150 / GS 200 / GS 42 / GS 51Lathes with Vertical Style Top Plates.
TBA
Used on all GS 200/66 / GS250, GS 200/66L / GS 250L Lathes with Vertical Style Top Plates
BL 000199098CK
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
9
OD
ID
Bushing Number Size Inch ID x OD
7943-00-19-006260 5/8" ID x 1.5" OD 7943-00-19-007500 3/4" ID x 1.5" OD 7943-00-19-010000 1.0" ID x 1.5" OD 7943-00-19-012500 1-1/4" ID x 1.5" OD
Metric ID x OD 7941-00-17-160000 16mm ID x40mm OD7941-00-17-200000 20mm ID x40mm OD7941-00-17-250000 25mm ID x40mm OD7941-00-17-320000 32mm ID x40mm OD
Bushing Number Size Inch ID x OD
7943-00-19-003750 3/8" ID x 1.5" OD 7943-00-19-005000 1/2" ID x 1.5" OD
Metric ID x OD 7941-00-17-080000 8mm ID x 40mm OD 7941-00-17-100000 10mm ID x 40mm OD 7941-00-17-120000 12mm ID x 40mm OD
GS Bushings Slotted Inch / Metric
GS Bushings Non-Slotted Inch / Metric
OD
ID
Note: For additional Bushings, Collets, and Wrenches please refer to Brochure #2351
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
10
Standard BL Style Bushings
Part Number A B C
BL 001194427A 1/4" 1-1/4" 2.362"
BL 001194428A 3/8" 1-1/4" 2.362"
BL 001194429A 1/2" 1-1/4" 2.362"
BL 001194430A 5/8" 1-1/4" 2.362"
BL 001194431A 3/4" 1-1/4" 2.362"
BL 001194432A 1.000" 1-1/4" 2.362"
C
B A
Used on all GS150 / GS 200 / GS 42 / GS 51 Lathes with Vertical Style Top Plates
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
11
Standard BL Style Bushings
Part Number A B C
BL 001194428C 3/8" 1-1/2" 2.953"
BL 001194429C 1/2" 1-1/2" 2.953"
BL 001194430C 5/8" 1-1/2" 2.953"
BL 001194431C 3/4" 1-1/2" 2.953"
BL 001194432C 1.000" 1-1/2" 2.953"
BL 001194472C 1-1/4" 1-1/2" 2.953"
Used on all GS 200/66 / GS250, GS 200/66L / GS 250L Lathes with Vertical Style Top Plates
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
12
Accessories
Coolant Nozzle 1/8 NPT/BSPT BL 00070110102 Used to lubricate Turning Type Tooling located in Vertical Turret Slots
Brass Pipe, Coolant BL 001010902A Used in Coolant Nozzle and Tool Holders to direct coolant to Tool Tip.
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
13
HARDINGE GS VDI 30 / 40 TOOL HOLDERS
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
14
Part Number d1 d3 h1 h2 l1 l2
TT-0011944 1.181" / 30mm 2.677" / 68mm 1.102" / 28mm 1.181" / 30mm 2.165" / 55mm .630" / 16mm
*HE-2813632 1.574" / 40mm 3.267" / 83 1.279" / 32.5mm 2.480” / 63mm .7874” / 20mm
BLANK TURRET PLUGUsed on VDI Face Working Turrets
* Used on VDI 40 Vertical Face Working Turrets
d3
d1
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
15
TOOL HOLDER RIGHT SHORT FORM B1
Part Number
d1 b1 b2 b3 h,in h5 h6 l1 l2
BL 0213020 1.181" /
30mm 2.756" / 70mm
1.377" / 35mm
.3937" / 10mm
3/4" 1.1023" / 28mm
1.496" / 38mm
.8661" / 22mm
1.5748" / 40mm
*BL 0214025 1.5748" /
40mm 3.3464" /
85mm 1.6732" / 42.5mm
.4921" / 12.5mm
1.000" 1.2795" / 32.5mm
1.8897" / 48mm
.8661" / 22mm
1.850" / 47mm
Right Handed Tool
* Used on VDI 40 Vertical Face Working Turrets
Used on VDI Face Working Turrets
On all GS style lathes with a VDI Turret Top Plate the Spindle is located on the Left side of the lathe as viewed by the operator standing in front and looking towards the back. When placing this holder on the GS VDI Turret, the Tool Holder Rack always faces UP. The Turning Tool is then placed in the holder with the Cutting Edge facing UP. This allows the Turning Insert to be placed on the Spindle Centerline. The above holder can uses either a Right or Left Hand Turning Tool. When a Right Hand Turning Tool is used the Spindle would turn in a Counter Clockwise (Reverse) Direction as the tool moves to the Right away from the Spindle. When a Left Hand Turning Tool is used the Spindle would also turn in a Counter Clockwise (Reverse) Direction as the tool moves to the Left towards the Spindle.
Left Hand Turning Tool Allows the cutting pressure to be placed into the bed of the lathes. Recommended Way To Turn.
Right Hand Turning Tool Allows the cutting pressure to be placed into the bed of the lathe. Recommended Way To Turn.
Tool Rack
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
16
TOOL HOLDER RIGHT SHORT FORM B3
Part Number
d1 b1 b2 b3 h,in h6 h7 l1 l2
BL 0233020 1.181" /
30mm 2.756" / 70mm
1.377" / 35mm
.3937" / 10mm
3/4" 1.496" / 38mm
1.3779" / 35mm
.8661" / 22mm
1.5748" / 40mm
*BL 0234025 1.5748" /
40mm 3.3464" /
85mm 1.6732" / 42.5mm
.4921" / 12.5mm
1.000" 1.8897" / 48mm
1.6732" / 42.5mm
.8661" / 22mm
1.850" / 47mm
* Used on VDI 40 Vertical Face Working Turrets
Used on VDI Face Working Turrets
On all GS style lathes with a VDI Turret Top Plate the Spindle is located on the Left side of the lathe as viewed by the operator standing in front and looking towards the back. When placing this holder on the GS VDI Turret, the Tool Holder Rack always faces UP. The Turning Tool is then placed in the holder with the cutting edge facing DOWN. This allows the Turning Insert to be placed on the Spindle Centerline. The above holder can uses either a Right or Left Hand Turning Tool. When a Right Hand Turning Tool is used the Spindle would turn in a Clockwise (Forward) Direction as the tool moves to the Left towards the Spindle. When a Left Hand Turning Tool is used the Spindle would turn in a Clockwise (Forward) Direction as the tool moves to the Right away from the Spindle.
Left Hand Turning Tool is placed in holder with the cutting edge facing DOWN. The tool would then cut Right away from the spindle.
Right Hand Turning Tool is placed in holder with the cutting edge facing DOWN. The tool would then cut Left towards the spindle. USED FOR CUTTING RIGHT HAND THREADS
Tool RackSpindle Centerline
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
17
TOOL HOLDER RIGHT LONG FORM B5
Part Number
d1 b1 b2 b3 h,in h5 h6 l1 l2
BL 0253020 1.181" /
30mm 3.937" / 100mm
2.559" / 65mm
.3937" / 10mm
3/4" 1.1023" / 28mm
1.496" / 38mm
1.5748" / 40mm
.866" / 22mm
*BL 0254025 1.5748" /
40mm 4.6546" / 118mm
2.972" / 75.5mm
.4921" / 12.5mm
1.000" 1.2795" / 32.5mm
1.8897" / 48mm
1.850" / 47mm
.866" / 22mm
*Used on VDI 40 Vertical Face Working
Used on VDI 30 / VDI 40 Face Working Turrets
On all GS style lathes with a VDI Turret Top Plate the Spindle is located on the Left side of the lathe as viewed by the operator standing in front and looking towards the back. When placing this holder on the GS VDI Turret, the Tool Holder Rack always faces UP. The Turning Tool is then placed in the holder with the Cutting Edge facing UP. This allows the Turning Insert to be placed on the Spindle Centerline. The above holder can uses either a Right or Left Hand Turning Tool. When a Right Hand Turning Tool is used the Spindle would turn in a Counter Clockwise (Reverse) Direction as the tool moves to the Right away from the Spindle. When a Left Hand Turning Tool is used the Spindle would also turn in a Counter Clockwise (Reverse) Direction as the tool moves to the Left towards the Spindle.
Tool Rack
Spindle Centerline
Right Hand Turning Tool is placed in holder with the cutting edge facing UP. The tool would then cut Right away from the spindle. . Recommended Way To Turn.
Left Hand Turning Tool is placed in holder with the cutting edge facing UP. The tool would then cut Left away towards the spindle. Recommended Way To Turn.
Caution: When using Long Form Turning Tool Holders ensure there is clearance between Tool Tip and all Way Covers.
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
18
TOOL HOLDER RIGHT LONG FORM B7
Part Number
d1 b1 b2 b3 h,in h6 h7 l1 l2
BL 0273020 1.181" /
30mm 3.937" / 100mm
2.559" / 65mm
.3937" / 10mm
3/4" 1.496" / 38mm
1.378" / 35mm
1.5748" / 40mm
.866" / 22mm
*BL 0274025 1.5748" /
40mm 4.6546" / 118mm
2.972" / 75.5mm
.4921" / 12.5mm
1.000" 1.8897" / 48mm
1.673" / 42.5mm
1.732" / 44mm
1.181" / 30mm
Spindle Centerline
Tool Rack
Caution: When using Long Form Turning Tool Holders ensure there is clearance between Tool Tip and all Way Covers.
Used on VDI 30 / VDI 40 Face Working Turrets
On all GS style lathes with a VDI Turret Top Plate the Spindle is located on the Left side of the lathe as viewed by the operator standing in front and looking towards the back. When placing this holder on the GS VDI Turret, the Tool Holder Rack always faces UP. The Turning Tool is then placed in the holder with the cutting edge facing DOWN. This allows the Turning Insert to be placed on the Spindle Centerline. The above holder can uses either a Right or Left Hand Turning Tool. When a Right Hand Turning Tool is used the Spindle would turn in a Clockwise (Forward) Direction as the tool moves to the Left towards the Spindle. When a Left Hand Turning Tool is used the Spindle would turn in a Clockwise (Forward) Direction as the tool moves to the Right away from the Spindle.
Left Hand Turning Tool is placed in holder with the cutting edge facing DOWN. The tool would then cut Right away from the spindle.
Right Hand Turning Tool is placed in holder with the cutting edge facing DOWN. The tool would then cut Left towards the spindle. USED FOR CUTTING RIGHT HAND THREADS
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
19
Tool Holder Axial Right Form C1
Used on VDI 30 / 40 Face Working Turrets
Part Number
d1 b1 b2 b3 h,in h5 h6 l1 l2 l3
BL 0313020 1.181" /
30mm 2.756" / 70mm
1.377" / 35mm
.6692" / 17mm
3/4" 1.1023" / 28mm
1.496" / 38mm
2.756" / 70mm
1.5748" / 10mm
1.181" / 30mm
*BL 0314025 1.5748" /
40mm 3.3464" /
85mm 1.6732" / 42.5mm
.807" / 20.5mm
1.000" 1.2795" / 32.5mm
1.8897" / 48mm
3.3465" / 85mm
1.7322" / 12.5mm
1.181" / 30mm
* Used on VDI Vertical Face Working Turrets
b3
The above holder can use either a Right or Left Hand Trepan Tool. When the Trepan Tool is placed in the holder the cutting edge facing UP. This allows the Turning Insert to be placed on the Spindle Centerline. The Spindle would turn in a Counter Clockwise (Reverse) Direction. This places pressure into the bed of lathe. Recommended Way To Trepan.
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
20
Tool Holder Axial Right Overhead Form C3
Part Number
d1 b1 b2 b3 h,in h6 h7 l1 l2 l3
BL 0333020 1.181" /
30mm 2.756" / 70mm
1.377" / 35mm
.6692" / 17mm
3/4" 1.496" / 38mm
1.377" / 35mm
2.756" / 70mm
1.5748" / 10mm
1.181" / 30mm
*BL 0334025 1.5748" /
40mm 3.3464" /
85mm 1.6732" / 42.5mm
.807" / 20.5mm
1.000" 1.8897" / 48mm
1.6732" / 42.5mm
3.3465" / 85mm
1.7322" / 12.5mm
1.181" / 30mm
Used on VDI 30 / 40 Face Working Holders
* Used on VDI 40 Vertical Face Working Turrets
The above holder can use either a Right or Left Hand Trepan Tool. When the Trepan Tool is placed in the holder the cutting edge faces DOWN. This allows the Turning Insert to be placed on the Spindle Centerline. The Spindle would turn in a Clockwise (Forward) Direction.
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
21
U-DRILL HOLDER WITH INTERNAL COOLANT FORM E1
Part Number
d1 d2 / inch d3 d4 d6 h1 h2 l1 l2 l3
BL 0513008 1.181" / 30mm
5/16" 1.811" / 46mm
.2362" / 6mm
2.6771" / 68mm
1.1023" / 28mm
1.181" / 30mm
2.638" / 67mm
2.1259" / 54mm
.866" / 22mm
BL 0513012 1.181" / 30mm
1/2" 1.811" / 46mm
.3937" / 10mm
2.6771" / 68mm
1.1023" / 28mm
1.181" / 30mm
2.638" / 67mm
2.1259" / 54mm
.866" / 22mm
BL 0513016 1.181" / 30mm
5/8" 1.811" / 46mm
.4724" / 12mm
2.6771" / 68mm
1.1023" / 28mm
1.181" / 30mm
2.638" / 67mm
2.1259" / 54mm
.866" / 22mm
BL 0513020 1.181" / 30mm
3/4" 1,.9685" / 50mm
.4724" / 12mm
2.6771" / 68mm
1.1023" / 28mm
1.181" / 30mm
2.638" / 67mm
2.1259" / 54mm
.866" / 22mm
BL 0513025 1.181" / 30mm
1.000" 2.165" / 55mm
.6692" / 17mm
2.6771" / 68mm
1.1023" / 28mm
1.181" / 30mm
2.795" / 71mm
2.323" / 59mm
.866" / 22mm
BL 0513032 1.181" / 30mm
1-1/4" 2.441" / 62mm
.9448" / 24mm
2.6771" / 68mm
1.1023" / 28mm
1.181" / 30mm
2.953" / 75mm
2.480" / 63mm
.866" / 22mm
BL 0513040 1.181" / 30mm
1-1/2" 2.5984" / 66mm
1.2598" / 32mm
2.6771" / 68mm
1.181" / 28mm
1.181" / 30mm
3.543" / 90mm
2.874" / 73mm
.866" / 22mm
*BL 0514016 1.5748" / 40mm
5/8" 2.1259" / 54mm
.4724" / 12mm
3.268" / 83mm
1.2795" / 32.5mm
. 2.6377" / 67mm
2.1259" / 54mm
.866" / 22mm
*BL 0514020 1.5748" / 40mm
3/4" 2.1259" / 54mm
.4724" / 12mm
3.268" / 83mm
1.2795" / 32.5mm
. 2.638" / 67mm
2.1259" / 54mm
.866" / 22mm
*BL 0514025 1.5748" / 40mm
1.000" 2.480" / 63mm
.6692" / 17mm
3.268" / 83mm
1.2795" / 32.5mm
. 2.9527" / 75mm
2.3228" / 59mm
.866" / 22mm
*BL 0514032 1.5748" / 40mm
1-1/4" 2.7165" / 69mm
.9448" / 24mm
3.268" / 83mm
1.2795" / 32.5mm
. 2.9527" / 75mm
2.480" / 63mm
.866" / 22mm
*BL 0514040 1.5748" / 40mm
1-1/2" 2.992" / 76mm
1.2598" / 32mm
3.268" / 83mm
1.2795" / 32.5mm
. 3.5433" / 90mm
2.874" / 73mm
.866" / 22mm
*BL 0514045 1.5748" / 40mm
1-3/4" 3.268" / 83mm
1.5748" / 40mm
3.268" / 83mm
1.2598" / 32mm
. 3.397" / 100mm
3.268" / 83mm
.
*BL 0514050 1.5748" / 40mm
2.000" 3.189" / 81mm
1.2598" / 32mm
3.268" / 83mm
1.2795" / 32.5mm
. 3.397" / 100mm
3.268" / 83mm
.866" / 22mm
The above holders have coolant through center of the holder ONLY.
* Used on VDI 40 Vertical Face Working Turrets
Used on VDI Face Working Turrets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
22
BORING BAR HOLDER FORM E2
Part Number
d1 d2 / inch d6 d8 h1 h2 l3 l6 l7
BL 0523006 1.181" / 30mm
1/4" 2.6771" / 68mm
2.165" / 55mm
1.1023" / 28mm
1.181" / 30mm
.866" / 22mm
2.3622" / 60mm
2.0078" / 51mm
BL 0523008 1.181" / 30mm
5/16" 2.6771" / 68mm
2.165" / 55mm
1.1023" / 28mm
1.181" / 30mm
.866" / 22mm
2.3622" / 60mm
2.0078" / 51mm
BL 0523010 1.181" / 30mm
3/8" 2.6771" / 68mm
2.165" / 55mm
1.1023" / 28mm
1.181" / 30mm
.866" / 22mm
2.3622" / 60mm
2.0078" / 51mm
BL 0523012 1.181" / 30mm
1/2" 2.6771" / 68mm
2.165" / 55mm
1.1023" / 28mm
1.181" / 30mm
.866" / 22mm
2.3622" / 60mm
2.0078" / 51mm
BL 0523016 1.181" / 30mm
5/8" 2.6771" / 68mm
2.165" / 55mm
1.1023" / 28mm
1.181" / 30mm
.866" / 22mm
2.3622" / 60mm
2.0078" / 51mm
BL 0523020 1.181" / 30mm
3/4" 2.6771" / 68mm
2.165" / 55mm
1.1023" / 28mm
1.181" / 30mm
.866" / 22mm
2.3622" / 60mm
2.0078" / 51mm
BL 0523025 1.181" / 30mm
1.000" 2.6771" / 68mm
2.165" / 55mm
1.1023" / 28mm
1.181" / 30mm
.866" / 22mm
2.3622" / 60mm
2.0078" / 51mm
BL 0523032 1.181" / 30mm
1-1/4" 2.6771" / 68mm
2.677" / 68mm
1.1023" / 28mm
1.181" / 30mm
.866" / 22mm
2.9527" / 75mm
2.4015" / 61mm
BL 0513040 1.181" / 30mm
1-1/2" 3.268" / 83mm
2.9133" / 74mm
1.2598" / 32mm
1.181" / 30mm
.866" / 22mm
3.5433" / 90mm
2.9133" / 74mm
*BL 0524008 1.5748" / 40mm
5/16" 3.268" / 83mm
2.165" / 55mm
1.2795" / 32.5mm
. .866" / 22mm
2.9527" / 75mm
2.4015" / 61mm
*BL 0524010 1.5748" / 40mm
3/8" 3.268" / 83mm
2.165" / 55mm
1.2795" / 32.5mm
. .866" / 22mm
2.9527" / 75mm
2.4015" / 61mm
*BL 0524012 1.5748" / 40mm
1/2" 3.268" / 83mm
2.165" / 55mm
1.2795" / 32.5mm
. .866" / 22mm
2.9527" / 75mm
2.4015" / 61mm
*BL 0524016 1.5748" / 40mm
5/8" 3.268" / 83mm
2.165" / 55mm
1.2795" / 32.5mm
. .866" / 22mm
2.9527" / 75mm
2.4015" / 61mm
*BL 0524020 1.5748" / 40mm
3/4" 3.268" / 83mm
2.165" / 55mm
1.2795" / 32.5mm
. .866" / 22mm
2.9527" / 75mm
2.4015" / 61mm
*BL 0524025 1.5748" / 40mm
1.000" 3.268" / 83mm
2.165" / 55mm
1.2795" / 32.5mm
. .866" / 22mm
2.9527" / 75mm
2.4015" / 61mm
*BL 0524032 1.5748" / 40mm
1-1/4" 3.268" / 83mm
3.268" / 83mm
1.2795" / 32.5mm
. .866" / 22mm
2.9527" / 75mm
2.4015" / 61mm
*BL 0524040 1.5748" / 40mm
1-1/2" 3.268" / 83mm
3.268" / 83mm
1.2795" / 32.5mm
. .866" / 22mm
3.5433" / 90mm
2.992" / 76mm
*BL 0524045 1.5748" / 40mm
1-3/4" 3.268" / 83mm
2.9133" / 74mm
1.2598" / 32mm
. .866" / 22mm
3.5433" / 90mm
2.913" / 74mm
*BL 0524050 1.5748" / 40mm
2.000" 3.268" / 83mm
3.268" / 83mm
1.2598" / 32mm
. . 3.937" / 100mm
3.3858" / 86mm
The above holders have duel coolant through the face of the holder ONLY.
* Used on VDI 40 Vertical Face Working Turrets
Used on VDI Face Working Turrets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
23
COLLET CHUCK Uses ER Style Collets
Part Number
d1 d2 / inch d6 d10 b1 l3 l8 l9 h1 h2 Collet Type
BL 0523006 1.181" / 30mm
1/32" - 5/8" / 1 - 16mm
2.6771" / 68mm
1.6535" / 42mm
1.181" / 30mm
.866" / 22mm
2.480" / 63mm
2.9527" / 75mm
1.1023" / 28mm
1.181" / 30mm
ER 25
BL 0523008 1.181" / 30mm
1/16" - 3/4" / 2-20mm
2.6771" / 68mm
1.9685" / 50mm
1.181" / 30mm
.866" / 22mm
2.480" / 63mm
2.9527" / 75mm
1.1023" / 28mm
1.181" / 30mm
ER 32
BL 0523010 1.181" / 30mm
3/32 - 1-1/32 3 - 25mm
2.6771" / 68mm
2.480" / 63mm" / 22mm
1.181" / 30mm
.866" / 22mm
2.4015" / 61mm
2.9527" / 75mm
1.1023" / 28mm
1.181" / 30mm
ER 40
*BL 0523012 1.5748" / 40mm
1/32" - 5/8" / 1 - 16mm
3.268" / 83mm
1.6535" / 42mm
. .866" / 22mm
2.480" / 63mm
2.9527" / 75mm
1.2795" / 32.5mm
. ER 25
*BL 0523016 1.5748" / 40mm
1/16" - 3/4" / 2-20mm
3.268" / 83mm
1.9685" / 50mm
. .866" / 22mm
2.480" / 63mm
2.9527" / 75mm
1.2795" / 32.5mm
. ER 32
*BL 0524050 1.5748" / 40mm
3/32 - 1-1/32 3 - 25mm
3.268" / 83mm
2.480" / 63mm" / 22mm
. .866" / 22mm
2.4015" / 61mm
2.9527" / 75mm
1.2795" / 32.5mm
. ER 40
INTERNAL COOLANT ONLY
* Used on VDI 40 Vertical Face Working Turrets
Used on VDI Face Working Turrets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
24
Uses ER 32 Collets
(Sizes 1/16" – 3/4" / 2 - 20mm)
VDI 30 AXIAL DRILLING AND MILLING HEAD WITH EXTERNAL COOLANT SUPPLY
Part Number: BL 0000144F
Uses ER 25 Collets (Sizes 1/32" - 5/8" / 1 - 16mm)
VDI 40 AXIAL DRILLING AND MILLING HEAD WITH EXTERNAL COOLANT SUPPLY
*Part Number: BL 0000144AF
2.756” ∅ 70mm ∅
1.65
3”
1.614” 41mm
2.736” 69.5mm
2.441” 62mm
1.18
1”
30m
m
1.57
4”
40m
m
1.96
8”
50m
m
2.992” 76mm
.512”/ 13mm Max.
3.397” 100mm
3.700” ∅ 94mm ∅
2.992” 76mm
* Used on VDI 40 Vertical Face Working Turrets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
25
VDI 30 RADIAL DRILLING AND MILLING HEAD WITH EXTERNAL COOLANT SUPPLY
Part Number: BL 0000144C
81
1.18
1”
30m
m
1.850” 47mm
1.2598” 32mm
1.2598” 32mm
3.189 81mm
2.165” 55mm
1.61
4”
41m
m
1.25
9”
32m
m2.
244”
57
mm
2.47
6” M
ax.
62.9
mm
Max
.
Uses ER 25 Collets (Sizes 1/32" - 5/8" / 1 - 16mm)
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
26
Uses ER 32 Collets (Sizes 1/16" – 3/4" / 2 - 20mm)
VDI 40 RADIAL DRILLING AND MILLING HEAD WITH EXTERNAL COOLANT SUPPLY
(Short Body)
*Part Number: BL 0000144ACF
0
.866
” 22
mm
2.95
3”
75m
m
4.68
5”
119m
m
0
.709” 18mm
1.850” 47mm
2.362” 60mm
2.205” 56mm 2.677” 68mm
1.57
5 40
mm
1.73
2”
44m
m
1.73
2”
44m
m
0* Used on VDI 40 Vertical Face Working Turrets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
27
VDI 40 RADIAL DRILLING AND MILLING HEAD WITH EXTERNAL COOLANT SUPPLY
(Long Body)
*Part Number: BL 0000144AC Uses ER 32 Collets (Sizes 1/16" – 3/4" / 2 - 20mm)
1.57
4”
40m
m
3.937” 100mm
.827
” 21
mm
1.535” 39mm
1.496” 38mm
3.91
7”
99.5
mm
1.496” 38mm
2.992” 76mm
5.433” 138mm
1.969” 50mm
1.259” 32mm
1.259” 32mm
2.205” 56mm
* Used on VDI 40 Vertical Face Working Turrets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
28
EXTERNAL COLLANT ONLY
VDI 30 DRILLING AND MILLING HEAD ANGLE-ADJUSTABLE +/- 90°
180° Moveable
0 2.52
0”
64m
m
4.64
6”
118m
m
Max
.
1.18
1”
30m
m
.472”
12
mm
.984” 25mm
0
.472”
12
mm
1.280
” 32
.5mm
1.280
” 32
.5mm
1.496
” 38
mm
0
.984” 25mm
1.280” 32.5mm
1.280” 32.5mm
0 1.102” 28mm
.650
” / 1
6mm
Part Number: BL 0000144A16 Uses ER16 Collets (Sizes .0393” to .394” /1 –10mm
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
29
ER11, ER16, & ER20 Collets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
30
ER25, ER32, & ERQC Quick-Change Floating Solid Tap Collets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
31
ERTC Floating Tap Collets & ERTCSP Multi-Split Collets
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
32
OD
ID
1.614” 41mm 2.441” 62mm
2.756” ∅ 70mm ∅
Uses ER 32
(Sizes 1/16" – 3/42.992” 76mm 3 397”
Size
Bushing Number Size Inch ID x OD
7943-00-19-003750 3/8" ID x 1.5" OD 7943-00-19-005000 1/2" ID x 1.5" OD
Metric ID x OD 7941-00-17-080000 8mm ID x 40mm OD 7941-00-17-100000 10mm ID x 40mm OD 7941-00-17-120000 12mm ID x 40mm OD
GS Bushings Slotted Inch / Metric
GS Bushings Non-Slotted Inch / Metric
OD
ID
Note: For additional Bushings, Collets, and Wrenches please refer to Brochure #2351
800-843-8801 / www.shophardinge.com / [email protected] *All specifications are subject to change without notice*
33