Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
GRUNDFOS DATA BOOKLET
TP 40-60/4-A-F-A-BQQE 400Y 50HZ Grundfos pump 98119685
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/TP000/98119685/TP-40-60-4-A-F-A-BQQE.html
[email protected]. +31 152 610 900 fax. +31 152 616 289
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description1 TP 40-60/4 A-F-A-BQQE
Product No.: On request
Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.
Further product detailsThe product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.
PumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.
1: Pump housing2: Impeller3: Shaft4: Coupling5: Pump head
The pump housing is provided with a replaceable stainles steel/PTFE neck ring to reduce the amount ofliquid running from the discharge side of the impeller to the suction side. The impeller is secured with asplit cone with nut.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
• Rotating seal ring material: silicon carbide (SiC)• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of thismaterial pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
1/11
Printed from Grundfos Product Centre [2018.06.003]
A circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaft seal.
The flanges have tappings for mounting of pressure gauges.
The motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.Motor and pump shaft are connected via a shell coupling.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor is flange-mounted with tapped-hole flange (FT).Motor-mounting designation in accordance with IEC 60034-7: IM B 14, IM V 18 (Code I) / IM 3601, IM3611 (Code II).
The motor does not incorporate motor protection and must be connected to a motor-protective circuitbreaker which can be manually reset. The motor-protective circuit breaker must be set according to therated current of the motor (I1/1).
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Rated flow: 10.6 m³/hRated head: 4.4 mActual impeller diameter: 123 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3B
Materials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304
Installation:Range of ambient temperature: -30 .. 40 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 40Pump inlet: DN 40Pump outlet: DN 40Pressure rating: PN 6/10(@): 250 mmFlange size for motor: FT85
Electrical data:Motor type: 71ARated power - P2: 0.25 kWPower (P2) required by pump: 0.25 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 1.48/0.85 AStarting current: 400-440 %Cos phi - power factor: 0.75-0.65
2/11
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionRated speed: 1400-1420 rpmEfficiency: 61,5% - 68,5%Motor efficiency at full load: 61.5-68.5 %Motor efficiency at 3/4 load: 70 %Motor efficiency at 1/2 load: 63.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F
Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 25.3 kgGross weight: 28.8 kgShipping volume: 0.06 m³Danish VVS No.: 38 1822.060Norwegian NRF no.: 9043538
3/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 40-60/4 A-F-A-BQQE 50 HzH
[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Q [m³/h]0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
eta[%]
0
10
20
30
40
50
60
70
80
90
100
TP 40-60/4, 3*400 V, 50Hz
P[W]
0
50
100
150
200
250
300
350
NPSH[m]
0
1
2
3
4
5
6
7P1
P2
4/11
Printed from Grundfos Product Centre [2018.06.003]
H[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Q [m³/h]0 2 4 6 8 10 12 14
eta[%]
0
10
20
30
40
50
60
70
80
90
100
TP 40-60/4, 3*400 V, 50Hz
P[W]
0
50
100
150
200
250
300
NPSH[m]
0
1
2
3
4
5
6
P1
P2
7512
3
389
25040
M12
RP 1/4
109109 109
141
120
125
100 100
DIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
LOW VOLTAGE
98.3
169L1
L2L3
L1L2
L3
Description ValueGeneral information:Product name: TP 40-60/4 A-F-A-BQQEProduct No: On requestEAN number: On requestTechnical:Rated flow: 10.6 m³/hRated head: 4.4 mHead max: 60 dmActual impeller diameter: 123 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304
Material code: AInstallation:Range of ambient temperature: -30 .. 40 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 40Pump inlet: DN 40Pump outlet: DN 40Pressure rating: PN 6/10(@) 250 mmFlange size for motor: FT85Connect code: FLiquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 71ARated power - P2: 0.25 kWPower (P2) required by pump: 0.25 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 1.48/0.85 AStarting current: 400-440 %Cos phi - power factor: 0.75-0.65Rated speed: 1400-1420 rpmEfficiency: 61,5% - 68,5%Motor efficiency at full load: 61.5-68.5 %Motor efficiency at 3/4 load: 70 %Motor efficiency at 1/2 load: 63.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 86805101Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 25.3 kgGross weight: 28.8 kgShipping volume: 0.06 m³Danish VVS No.: 38 1822.060Norwegian NRF no.: 9043538
25040
M12
RP 1/4
109
109109
141
125
100100
5/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 40-60/4 A-F-A-BQQE 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22 0.24 0.26 0.28 0.30
I[A]
0.0
0.2
0.4
0.6
0.8
TP40-60/4 + 71A 0.25 kW 3*400 V, 50 Hz
eta
cos phi
I
n[rpm]
1000
1100
1200
1300
1400
P1[kW]
0.00
0.10
0.20
0.30
0.40n
P1
6/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 40-60/4 A-F-A-BQQE 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
7512
3
389
25040
M12
RP 1/4
109109 109
141
120
125
100 100
7/11
Printed from Grundfos Product Centre [2018.06.003]
Exploded view
301a
219
92
7
7a
77
301a
92
11
9
51
100
49
105
45
215a
215
18
217215a
534a534
531531a
28
17
251d
251a
6
11b
66a
67
530530a
8/11
Printed from Grundfos Product Centre [2018.06.003]
Sectional drawing (TM058200 for TPE2,TPE3)
4
2 13
5
TM058200
9/11
Printed from Grundfos Product Centre [2018.06.003]
Exploded view ( TM057026 for MGE model H/I )
251d
251b
290
287277a
286
277
273a
273
268268a289a289
288b288288a
251a
252b
156c
159d
156b
156d188
275a
153
154
158
178
185
192
191
159e
156c 156
151152
266
187
291
293
252a
172
150
287a
502
273b
157
10/11
Printed from Grundfos Product Centre [2018.06.003]
Parts list TP 40-60/4, Product No. On requestValid from 20.6.2010 (1024)
Pos Description Annotation Données de classification Référence Quantité Unité+ Motor 1 pcs- Coupling cpl. 1 pcs
9 Hex socket head cap screw Designation: DIN 912 4Length (mm): 20Thread: M6
10 Shaft pin Diameter: 5 1Length (mm): 26
10a Coupling half 2- Motor stool cpl. 1 pcs
2 Motor stool 126 Hex head screw Length (mm): 28 8
Thread: M1028 Hex head screw Length (mm): 20 4
Thread: M6- Pump housing cpl. 1 pcs- 6 Pump housing 1
Pump housing 145 Neck ring 1
- Coupling guard cpl. 1 pcs7 Coupling guard 27a Pan head screw 4
- Shaft seal cpl. 1 pcs105 Shaft seal 1
- Shaft w/impeller cpl. 1 pcs49 Impeller cpl. 149b Split cone 149b Split cone nut 151 Pump shaft 118 Air vent screw Thread: 1/4" 1 pcs19 Plug 2 pcs72a O-ring Diameter: 154 1 pcs
Material type: EPDMThickness: 4
11/11
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289