Company name:Created by:Phone:Fax:Date:

-----

-----

Printed from Grundfos CAPS [2011.05.069]

Position Qty. Description Single Price

1 On requestSP 17-3

Note! Product picture may differ from actual product

Product No.: 12A01903Multi-stage submersible pump for raw water supply, groundwater lowering and pressureboosting. The pump is suitable for pumping clean, thin, non-agressive liquids without solidparticles or fibres.

The pump is made entirely of Stainless steel DIN W.-Nr. DIN W.-Nr. 1.4301.

The motor is a 3-phase motor with sand shield, liquid-lubricated bearings and pressureequalizing diaphragm.

Liquid:Max liquid t at 0.15 m/sec: 313 KLiquid temp: 293 K

Technical:Speed for pump data: 2900 rpmActual calculated flow: 17 m³/hResulting head of the pump: 23.7 mShaft seal for motor: LIPSEALCurve tolerance: ISO9906

Materials:Pump: Stainless steel

DIN W.-Nr. 1.4301AISI 304

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Motor: Stainless steelDIN W.-Nr. 1.4301AISI 304

Installation:Pump outlet: Rp 2 1/2Motor diameter: 4 inch

Electrical data:Motor type: MS402Rated power - P2: 2.2 kWMains frequency: 50 HzRated voltage: 3 x 380-400-415 V

1/6

Company name:Created by:Phone:Fax:Date:

-----

-----

Printed from Grundfos CAPS [2011.05.069]

Position Qty. Description Single Price

Start. method: direct-on-lineRated current: 5,50-5,50-5,70 ACos phi - power factor: 0,85-0,82-0,77Rated speed: 2850-2860-2870 rpmEnclosure class (IEC 34-5): 58Insulation class (IEC 85): BBuilt-in temp. transmitter: no

Others:Net weight: 19 kgGross weight: 20 kgShipping volume: 0.02 m3

2/6

Company name:Created by:Phone:Fax:Date:

-----

-----

Printed from Grundfos CAPS [2011.05.069]

12A01903 SP 17-3 50 Hz

Q(m³/h)0 2 4 6 8 10 12 14 16 18 20

H(m)

0

4

8

12

16

20

24

28

32

P(kW)

0

0.4

0.8

1.2

1.6

2

P2

P1

SP 17-3 3* 400 V, 50 HzPumped liquid = WaterLiquid temperature = 293 KDensity = 1000 kg/m³

3/6

Company name:Created by:Phone:Fax:Date:

-----

-----

Printed from Grundfos CAPS [2011.05.069]

Q(m³/h)0 2 4 6 8 10 12 14 16 18

H(m)

0

4

8

12

16

20

24

28

32

P(kW)

00.40.81.21.6 P2

P1

SP 17-3 3* 400 V, 50 HzPumped liquid = WaterLiquid temperature = 293 KDensity = 1000 kg/m³

Rp 2 1/2

784

349

435

95

131

L1

PEWVU

PE

M

L3L2

3

Description ValueProduct name: SP 17-3Product No: 12A01903EAN number: 5700391130922 Technical:Speed for pump data 2900 rpmActual calculated flow: 17 m³/hResulting head of the pump: 23.7 mShaft seal for motor: LIPSEALCurve tolerance: ISO9906Pump No: 12A00003Stages: 3Model: AValve: pump with built-in non-return valve Materials:Pump: Stainless steel

DIN W.-Nr. 1.4301AISI 304

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Motor: Stainless steelDIN W.-Nr. 1.4301AISI 304

Installation:Pump outlet: Rp 2 1/2Motor diameter: 4 inch Liquid:Max liquid t at 0.15 m/sec 313 KLiquid temp: 293 K Electrical data:Motor type: MS402Applic. motor: NEMARated power - P2: 2.2 kWMains frequency: 50 HzRated voltage: 3 x 380-400-415 VStart. method: direct-on-lineRated current: 5,50-5,50-5,70 ACos phi - power factor: 0,85-0,82-0,77Rated speed: 2850-2860-2870 rpmEnclosure class (IEC 34-5): 58Insulation class (IEC 85): BMotor protec: NONEThermal protec: externalBuilt-in temp. transmitter noMotor No: 79192007 Others:Net weight: 19 kgGross weight: 20 kgShipping volume: 0.02 m3

4/6

Company name:Created by:Phone:Fax:Date:

-----

-----

Printed from Grundfos CAPS [2011.05.069]

12A01903 SP 17-3 50 Hz

P2(kW)0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4

cos phieta

0

0.2

0.4

0.6

0.8

1

I(A)

0

2

4

6

8

10

n(rpm)

1800

2000

2200

2400

2600

2800

P1(kW)

0

1

2

3

4

5

6

P1

I

cos phi

eta

n

SP 17-3 + MS402 2.2 kW 3* 400 V, 50 Hz

5/6

Company name:Created by:Phone:Fax:Date:

-----

-----

Printed from Grundfos CAPS [2011.05.069]

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

12A01903 SP 17-3 50 Hz

Rp 2 1/278

4

349

435

95

131

6/6