3
 CONLIFT1 , CONLIFT2, CONLIFT2 PH+ CONLIFT1 and CONLIFT2 are pre-assembled lifting stations made for condensate remov al. The units operate automatically when the condensate enters t he collection tank. CONLIFT1 and CONLIFT2 are supplied with an integrated NC/ NO contact and cable so that if the overow switch detects a high water level this can be used to switch othe boiler. CONLIFT2 also includes an acoustic alarm in case of a high water condition . It also has a selector switch wi th the following two options.  Position 1: The pump is started, the condensate source (boiler) is switched oand an acoustic alarm is generated. Position 0: The condensate source (boiler) is switched oand an acoustic alarm is generated. CONLIFT2 pH+ CONLIFT2 pH+ is the CONLIFT2 but with an additional neutralisation unit supplied for those applications where condensate has a pH value below 2.5. The granulate supplied will raise the acid condensate to a more neutral level. This will reduce the risk of acid corrosion of the underground drainage pipe work within the property. All units can be installed as either oor standing or for wall mounting. Units are supplied with  6 m discharge hose.  Connector for drain pipes from boilers up to 40 mm dia.  Adaptor for discharge h ose connections to 21.5 mm and 40 mm drain pipes. The CONLIFT2 pH+ also includes  Connectors for the neutral isation unit (if it is placed next to the condensate pump as illustrated).  1.2 kg neutr alisation gr anulate.  pH tester f or monitoring purposes. CONLIFT1 , CONLIFT2

Grundfos Condensate Pump_Conlif1, Conlift2, Conlift2 pH+

Embed Size (px)

Citation preview

8/13/2019 Grundfos Condensate Pump_Conlif1, Conlift2, Conlift2 pH+

http://slidepdf.com/reader/full/grundfos-condensate-pumpconlif1-conlift2-conlift2-ph 1/2

8/13/2019 Grundfos Condensate Pump_Conlif1, Conlift2, Conlift2 pH+

http://slidepdf.com/reader/full/grundfos-condensate-pumpconlif1-conlift2-conlift2-ph 2/2