24
Features YB5515: 13,6 t (15 USt) capacity three-section boom with 12,5 m (41 ft) outreach YB5518: 16,3 t (18 USt) capacity four-section boom with 16,6 m (54 ft 6 in) outreach 4,6 m (15 ft) offsettable swingaway extension 9072 kg (20,000 lb) deck carrying capacity Available with diesel or dual fuel engine Grove YB5500 Series Product Guide

Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Features

• YB5515: 13,6 t (15 USt) capacity three-section boom with 12,5 m (41 ft) outreach

• YB5518: 16,3 t (18 USt) capacity four-section boom with 16,6 m (54 ft 6 in) outreach

• 4,6 m (15 ft) offsettable swingaway extension

• 9072 kg (20,000 lb) deck carrying capacity

• Available with diesel or dual fuel engine

Grove YB5500 SeriesProduct Guide

Page 2: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Features

CabBoth models come equipped with a standard open air cab shell with overhead safety glass.

An optional enclosed cab with the addition of front, right, and rear glass, a split (two-piece) hinged door with sliding glass. Front windshield wiper, heater and defroster fan are included.

OutriggersThe YB5515 is equipped with single-position oblique style outriggers. The YB5518 comes equipped with two-position beam/jack style outriggers.

Cummins engineThe Cummins QSB 3,3 L, Tier III, diesel comes standard in both models.

Horsepower rating: YB5515: 63 kW (85 hp) at 2600 rpm.YB5518: 73,8 kW (99 hp) at 2600 rpm.

BoomA 12,5 m (41 ft) main boom comes standard on the YB5515. An optional fourth main boom section adds 3,4 m (11 ft) additional boom length.

The YB5518 comes standard with a 16,6 m (54 ft 6 in) main boom.

SteeringStandard steering modes on the YB5515 is two-wheel, four-wheel, and crab steer with an option for electronic self-alignment.

Standard steering modes on the YB5518 include two-wheel, four-wheel, crab steer and electronic self-alignment.

Page 3: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Contents

Features 2

Specifications 4

YB5515 dimensions 7

YB5515 three-section boom working range 8

YB5515 four-section boom working range 9

YB5515 three-section boom load chart 10

YB5515 four-section boom load chart 11

YB5518 dimensions 12

YB5518 range diagram 13

YB5518 load chart 14

YB5515 three-section boom DIN/ISO range diagram 15

YB5515 four-section boom DIN/ISO range diagram 16

YB5515 three-section boom DIN/ISO load chart 17

YB5515 four-section boom DIN/ISO load chart 18

YB5518 DIN/ISO range diagram 19

YB5518 DIN/ISO load chart 20

Symbols glossary 21

Notes 22

Page 4: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

4

Specifications

Load indicator (wireless LSI)

A simple effective and easy to use load indicating system used in conjunction with the anti-two block system to assist the operator in efficient operation of the unit within the limits of the load chart. The display panel displays the hook load and warns the operator when a preset load capacity is exceeded. The warning is by a flashing light on the display panel. In conjunction with the load display panel (receiver), there is a wireless transmitter and load sensing pin attached to the boom head that transmits the hook load to the display panel.

*Load moment indicator(hardwired LMI)

Digital display of boom angle, boom length, boom radius, capacity, and allows for operator input to set the limits based on load chart. Displays color coded light bar and audible alarm with function cutout if load exceeds entered parameters.

Swing

Ball bearing swing circle with 360° continuous rotation. Hydraulic driven worm gear and pinion.Maximum speed: YB5515: 2.1 rpm YB5518: 2.5 rpm

Hydraulic system

Four section gear pump providing a system pressure of 241,3 bars (3500 psi)Combined flow: 333,1 Lpm (88.0 gpm)YB5515: Six-section valve bank mounted in dash with direct mechanical linkage for low effort lever control.YB5518: Six-section valve bank chassis mounted; operated via dash mounted, pilot pressure hydraulic joysticks.Return line filter with full flow by-pass protection and service indicator.151,4 L (40 gal) hydraulic reservoir with sight level gauge and steel side plating to guard against side impact damage.

Superstructure

Boom

YB5515: 5,6 m – 12,5 m (18 ft 6 in – 41 ft 0 in) three-section full power boom.Maximum tip height: 14,1 m (46 ft 3 in)YB5518: 5,6 m – 16,6 m (18 ft 6 in – 54 ft 6 in) four-section full power boom.Maximum tip height: 19,0 m (62 ft 6 in)

*Optional boom

YB5515: Manual fourth main boom fly sectionMaximum tip height: 17,0 m (56 ft 3 in)

*Boom extension

4,6 m (15 ft) offsettable swingaway extension

Boom nose

YB5515: Two sheave non-pivoting boom noseYB5518: Two sheave, -3-position (0°, + 40°, + 80°) pivoting boom nose for minimizing head space requirements. Lowers head height 0,4 m (15.9 in) when nose is pivoted fully forward.

Boom elevation

YB5515: Single double acting hydraulic cylinder with integral holding valve.YB5518: Two double acting hydraulic cylinders with integral holding valve.Elevation: 0° to 69° for the YB5515 0° to 80° for the YB5518

Anti-two block device

Standard anti-two block device, when activated, provides an audible warning to the crane operator and disengages all crane functions whose movement can cause two-blocking.

*Denotes optional equipment

Page 5: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 5

Specifications

Outrigger controls

YB5515: Lever controls located on dash panel and operate the beams in pairs from side to side. Level bubble located inside operators compartment.YB5518: Two switch operation mounted on dash panel. One three- position rocker switch to select all beams / jacks, left beams / jacks only, or right beams / jacks only. Separate four- way toggle switch to activate beams out / in and jacks down / up. Level bubble indicator located inside operators compartment.*Independent outrigger controls available as an option.

Standard engine (Tier III)

YB5515: Cummins QSB 3,3 L turbo-charged diesel rated @ 63,0 kW (85 bhp) @ 2600 rpm.YB5518: Cummins QSB 3,3 L turbo-charged diesel rated @ 73,8 kW (99 bhp) @ 2600 rpm.

*Optional engine (2007 EPA)

G.M. 4,3 L V-6 EFI dual fuel (gasoline / L.P.) rated @ 69,3 kW (93 bhp) @ 2500 rpm.

Operators control station

Frame mounted, open air style control station with cab shell includes all crane functions, driving controls, and overhead safety glass. Other standard equipment include a durable weather resistant seat with seat belt, hourmeter, sight level bubble, and fire extinguisher. The dash panel includes engine oil pressure gauge, engine water temperature gauge, fuel gauge, transmission low oil and high temperature warning lights, low battery warning light, and brake system low pressure warning light. The LSI (load indicator) receiver is mounted to the top of the dash.

*Operators control station enclosed

Includes the standard cab shell with the addition of front, right, and rear glass, a split (two-piece) hinged door with sliding glass.Front windshield wiper, heater and defroster fan are included.

Superstructure (continued)

Hoist specifications

Piston motor drive with spring applied / hyd. released brake. Equal speed power up and down.Drum diameter: 0,25m (9.75 in)Maximum hoist single line pull: 5443 kg (12,000 lb)Maximum hoist single line speed: YB5515: 38,4 m/min (126 fpm) YB5518: 48,2 m/min (158 fpm)Maximum permissible single line pull: YB5515: 3402 kg (7500 lb) (12,7 mm [1/2 in]) YB5518: 4082 kg (9000 lb) (12,7 mm [1/2 in]) Rope length:YB5515: (three-section boom) 73,0 m (240 ft)(four-section boom) 88,4 m (290 ft)YB5518: 94,5 m (310 ft)

Carrier

Frame

High strength alloy steel constructed with integral outrigger housings; front and rear tie-down lugs. 75 ft2 carrydeck size with 9072 kg (20,000 lb) carrying capacity. Deck coated with anti-skid treatment.

Outriggers

YB5515: Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size 222 mm x 254 mm (8.75 in x 10 in). Maximum pad load: 162 p.s.i.YB5518: Two-stage hydraulic telescoping beam with oblique type jack on all four corners, provides extended and down and retracted and down lifting capacities. Integral holding valves on both beam and jack. Outrigger pad size 222 mm x 254 mm (8.75 in x 10 in).Maximum pad load: 389 p.s.i.

*Denotes optional equipment

Page 6: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

6

Specifications

Suspension

Front: Rigid mounted to frame.Rear: Provides 1.5° oscillation for use on semi-rough terrain. Axle lock-out must be engaged (locked) whenever picking on rubber or traveling in the crab steer mode. A warning light indicates when the axle lock-outs are engaged.

Lights

Recessed mounted, includes head, tail, rear work, stop, and turn signals.

Maximum speed

YB5515: 23,3 km/h (14.5 mph)YB5518: 33,8 km/h (21.0 mph)

Gradeability (theoretical)

YB5515: 73%....no load 41%.... 9072 kg (20,000 lb) loadYB5518: 68%....no load 40%.... 9072 kg (20,000 lb) load

Gross vehicle weight (G.V.W.)

YB5515: 12 742 kg (28,090 lb) three-section boom 12 966 kg (28,584 lb) four-section boomYB5518: 14 769 kg (32,560 lb)*All weights with enclosed cab

Miscellaneous standard equipment

Two sheave, “Quick Reeve” style hookblock; YB5515: 13,6 t (15.0 USt); YB5518: 16,3 t (18.0 USt).Back-up alarmLifting and tie down lugsOutrigger motion alarm

Carrier (continued)

Fuel tank capacity

151,4 L (40 gal) all steel construction with steel side plate to guard against side impact.

Electrical system

One 12V maintenance free battery, 820CCA @ 0°. 63 amp alternator.

Drive

4 x 2 – Front axle drive with planetary hubs and limited slip differential.

Steer

YB5515: Two-wheel, four-wheel, and crab steerYB5518: Two-wheel, four-wheel, and crab steer with electric self alignment.

Outside turning radius:YB5515/5518: Two wheel steer: 6,55 m (21 ft 6 in) Four wheel steer: 3,76 m (12 ft 4 in)

Transmission

YB5515: I.T.L. synchromesh four-speeds forward and reverse.YB5518: I.T.L. powershift four-speeds forward and reverse. Stalk mounted shifter on left side of steering column.

Tires

385/65R 22.5 radial traction tread pneumatic.

Brakes

Hydraulic actuated internal wet-disc service brakes acting on all four wheels. A dash mounted toggle switch activates the dry disc parking brake on the transmission output yoke with a dash warning light.

*Denotes optional equipment

Page 7: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 7

Dimensions

YB55154,58 m

(15' 0.50")

2,16 m(7' 1")

1,83 m(6' 0")

1,06 m(3' 6")

0,74 m(2' 5")

2,43 m (7' 1 1-1/2")

1,22 m(4' 0")

2,01 m(6' 7")

4,06 m (13' 2-1/2'')

6,73 m(22' 1'')

50,8 cm(1' 8")

4,29 m(14' 1')

Three Section Boom

1,32 m(4' 4")

2,03 mm(8")

0,08 m(3")

2,44 m w/ Enclosed Cab(8' 0" )

3,73 m(12' 3")

1,88 m(6' 2")

1,99 m(6' 6-1/2")

1,24 m(4' 1")

38,1 cm(1' 3")

33,0 cm(1' 1")

Four Section Boom 5,65 m Retracted

(18' 6'')

15,93 m Extended(52' 3")

5,65 m Retracted(18' 6'')

12,50 m Extended(41' 0'')

2,43 m (7' 1 1-1/2")

4,58 m(15' 0.50")

2,16 m(7' 1")

1,83 m(6' 0")

1,06 m(3' 6")

0,74 m(2' 5")

2,43 m (7' 1 1-1/2")

1,22 m(4' 0")

2,01 m(6' 7")

4,06 m (13' 2-1/2'')

6,73 m(22' 1'')

50,8 cm(1' 8")

4,29 m(14' 1')

Three Section Boom

1,32 m(4' 4")

2,03 mm(8")

0,08 m(3")

2,44 m w/ Enclosed Cab(8' 0" )

3,73 m(12' 3")

1,88 m(6' 2")

1,99 m(6' 6-1/2")

1,24 m(4' 1")

38,1 cm(1' 3")

33,0 cm(1' 1")

Four Section Boom 5,65 m Retracted

(18' 6'')

15,93 m Extended(52' 3")

5,65 m Retracted(18' 6'')

12,50 m Extended(41' 0'')

2,43 m (7' 1 1-1/2")

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Page 8: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

8

Range diagram

YB5515 (three-section boom)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Hei

ght

from

the

gro

und

in fe

et

128 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 5446 4 2 0 2 6

52

0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

44

36

38

40

42

48

46

50

60

56

54

58

6246 4 2 0 2 1286 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 54

0

52

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

44

36

38

40

42

48

46

50

60

56

54

58

62

69°

60°

50°

40°

30°

20°

10°

Boo

m a

nd e

xten

sion

leng

th in

feet

Operating radius in feet from axis of rotation

Page 9: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 9

Range diagram

YB5515 (four-section boom)

52

0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

44

36

38

40

42

48

46

50

60

56

54

58

62

64

66

68

70

72

128 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 54 56 58 60 62 64 660

46 4 2 0 2 6

46 4 2 0 2 1286 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 54 56 58 60 62 64 66

52

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

44

36

38

40

42

48

46

50

60

56

54

58

62

64

66

68

70

72

0o

10o

20o

30o

40o

50o

60o

69o

RETRACTEDW/4TH RET

RETRACTEDW/4TH EXT

EXTENDEDW/4TH RET

EXTENDEDW/4TH EXT

15'JIB

OPERATING RADIUS IN FEET FROM AXIS OF ROTATION

HEI

GH

T FR

OM

TH

E G

RO

UN

D IN

FEE

T

YB5515 (4-SECTION BOOM)

Boo

m a

nd e

xten

sion

leng

th in

feet

Operating radus in feet from axis of rotation

Hei

ght

from

the

gro

und

in fe

et

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Page 10: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

10

Load chart

NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.

OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.

1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of verticalhoist line or tackle with load applied.

2) The rated loads shown on outriggersdo not exceed 85% of actual tipping. Therated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors a�ecting stability. Hazardous suroundings, climatic conditions, experience of operator andproper training must be taken into account by the operator.

3) The weights of all load handling devices, such as hooks, hook blocks,slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart.

4) Ratings on outriggers are withoutriggers fully extended.

5) Ratings on rubber depend on tire capacity, , condition of tires and proper inflation pressure (120 psi). Loads on rubber may be transportedat a maximum speed of 2.5 mph on a smooth, hard, level surface with theboom retracted to the shortest lengthpossible and centered over the front.

6) For operating radius not shown,use load rating of next larger radius.

7) The maximum combined total boom and deck load is 16,000 lb. The maximum deck load only is 20,000 lb.

8) Do not induce any external side loads to boom or jib.

YB5515 (3-SECTION BOOM)

1302442YB

ON OUTRIGGERS (lb)

MA

IN B

OO

MJI

B

ON RUBBER (lb)

14,800

RADIUS(ft)

13,00012,20010,80096308640

14,80013,00012,20010,8009180

4290

32603060

35803920

53104740

62107480

34803310

29602710

24102210

27002560

2860

5060

40204510

704064205700

7790

3700

72106600

60005250

640570

740690

3190

1320

930860800

11601040

18201530

22002660

47603900

1040930

4370

1990

1460

12701370

17901610

26202260

30703710

60605120

3130

F/R 360° F/R 360°

30,00026,20022,30018,600

30,00026,20022,30018,600

17,00013,500

17,00014,60010,8808100

10,7008710

14.015.016.018.020.022.024.026.028.030.032.034.036.037.540.042.044.046.048.8

6.08.010.012.0

2390 1940 48079052.5

BOOM

(deg)ANGLE

MAIN

60

40

15

0

3035

4550

2250

1950

-

21502080

3150

26002400

JIB STRUCTURAL

55 2850

25 205020 2000

5 -10 -

69 390065 3500

2800

2100

2000

26002400

4300

34003050

3800

23002200

20202050

60005000

1950

-

-

19001850

2350

21002000

2200

--

--

28002550

15°0° 30°

CAPACITIES (lb)

11901120

0 - 30,000 lb4-PART

0 - 7500 lb1- PART

RIGGING CHART

WIRE ROPE: 1/2 in diameter

Minimum breaking strength 26,250 lb

REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

210 lb

100 lb

0 lb

700 lb

N/A

100 lb

N/A

0 lb

FRONT REAR

SIDE

SIDE

15°

30°

15°

30°

YB5515 (three-section boom)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Page 11: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 11

Load chart

1) The rated loads are the maximumlifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtainoperating radius. The operating radius is the horizontal distance from a projection of the axis ofrotation to the supporting surface,before loading, to the center ofvertical hoist line or tackle withload applied.

2) The rated loads shown on outriggers do not exceed 85% ofactual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniformsupporting surface. Practicalworking loads depend on supporting surface, operating radiusand other factors a�ecting stability .Hazardous suroundings, climatic conditions, experience of operatorand proper training must be takeninto account by the operator.

3) The weights of all load handlingdevices, such as hooks, hookblocks, slings, etc., except the hoistrope, shall be considered as partof the load. See reduction chart.

4) Ratings on outriggers are withoutriggers fully extended.

5) Ratings on rubber depend on tirecapacity , condition of tires andproper inflation pressure (120 psi).Loads on rubber may be transported at a maximum speedof 2.5 mph on a smooth, hard, levelsurface with the boom retracted tothe shortest length possible and centered over the front.

6) For operating radius not shown, useload rating of next larger radius.

7) The maximum combined totalboom and deck load is 16,000 lb.The maximum deck load only is 20,000 lb.

8) Do not induce any external sideloads to boom or jib.

NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.

OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.

1302395YB

0 - 30,000 lb4-PART

0 - 7500 lb1-PART

RIGGING CHART

WIRE ROPE: 1/2 inch diameter

Min. breaking strength 26,250 lb

REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

210 lb

100 lb

0 lb

700 lb

N/A

100 lb

N/A

0 lb

FRONT REAR

SIDE

SIDE

15o

30o

15o

30o

ON RUBBER (lb)ON OUTRIGGERS (lb)

MA

IN B

OO

MJIB

14,80014.0

RADIUS(ft)

15.0 13,00016.0 12,20018.0 10,80020.0 963022.0 864024.026.028.030.032.034.036.037.540.042.044.046.048.8

58.052.5

14,80013,00012,20010,6008630

4420

31902890

35703950

57005040

64607350

29502760

243022402030

- -

209018501480

24302250

2600

4400

35103930

680058205020

7790

3210

72106600

54804890

-

450380290

550500

3080

1220

770680610

1070920

16101410

19902460

45003750

-

800680500

970890

3980

1880

1280

1070

16501460

23602100

27203230

60604950

2590

F/R 360° F/R 360°

63.8 - - --

ON RUBBER (lb)ON OUTRIGGERS (lb)

8290

RADIUS(ft)

82008110795078207710

83908200

79507820

4760

31902970

35704080

63305420

72707710

34003150

2630232020701720 1380

213019301710

24902300

2700

5180

42504680

710065905710

7630

3830

77607150

75006080

170

470370280

630540

3560

1580

990880740

1360

21501840

25203000

55104500

420

790710590

960870

4730

2190

1370

10701240

18801600

29402550

34103980

66105680

2890

F/R 360° F/R 360°

1330 1020 60230

4TH EXTENDED

30,0006.08.0 26,20010.0 22,30012.0 18,600

30,00026,20022,30018,600

17,00013,500

17,00014,60011,0007650

10,7008710

-11,00010,7009250

-

10,7009250

- -

10,7009250

10,7009250

14.015.016.018.020.022.024.026.028.030.032.034.036.037.540.042.044.046.048.8

58.052.5

63.8

6.08.010.012.0

4TH RETRACTEDBOOM

(deg)ANGLE

MAIN

4TH RETRACTED

60

40

15

0

3035

4550

2250

1950

-

21502080

3150

26002400

JIB STRUCTURAL CAPACITIES (lb)

55 2850

25 205020 2000

5 -10 -

69 390065 3500

4TH EXTENDED

2800

2100

2000

26002400

4300

34003050

3800

23002200

20202050

60005000

1950

-

-

19001850

2350

21002000

2200

--

--

28002550

15°0° 30° 0° 15° 30°

2250

1950

-

21502080

3150

26002400

2850

20502000

--

39003500

2800

2100

2000

26002400

4300

34003050

3800

23002200

20202050

51804970

1950

-

-

19001850

2350

21002000

2200

--

--

2800255011,000 11,000 11,000

8110

1180

1160

YB5515 (four-section boom)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Page 12: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

12

Dimensions

YB5518

2,41 m(7' 1 1")

1,89 m(6' 2.25") 1,17 m

(3' 10")

0,36 m(14.25")

1,98 m(6' 6")

2,38 m(7' 9.5")

4,22 m(13' 10")

1,24 m(4' .75")

0,75 m(2' 5.5")

1,17 m(3' 10.75 ")

2,03 m(6' 8")

0,42 m(1' 4.5")

1,07 m(3' 6")

4,78 m(15' 8")

SEEINSET

0,51 m(1' 8")

1,19 m(3' 1 1")2,42 m

(7' 1 1.25")2,00 m

(6' 6.75")2,17 m

(7' 1.25")4,30 m

(14' 1.25")6,91 m(22' 8")

0,34 m(13.25")

Retracted 5,64 m (18' 6") and Extended 16,61 m (54' 6")

1,83 m(6' 0")

2,13 m(7' 0")

1,68 m(65.97") 0o

1,61 m(63.39") 40o

1,27 m(50.00")

80o

YB5518 Dimensions

Dimensions are with the boom horizontaland the anti-two block bottomed.

2,41 m(7' 1 1")

1,89 m(6' 2.25") 1,17 m

(3' 10")

0,36 m(14.25")

1,98 m(6' 6")

2,38 m(7' 9.5")

4,22 m(13' 10")

1,24 m(4' .75")

0,75 m(2' 5.5")

1,17 m(3' 10.75 ")

2,03 m(6' 8")

0,42 m(1' 4.5")

1,07 m(3' 6")

4,78 m(15' 8")

SEEINSET

0,51 m(1' 8")

1,19 m(3' 1 1")2,42 m

(7' 1 1.25")2,00 m

(6' 6.75")2,17 m

(7' 1.25")4,30 m

(14' 1.25")6,91 m(22' 8")

0,34 m(13.25")

Retracted 5,64 m (18' 6") and Extended 16,61 m (54' 6")

1,83 m(6' 0")

2,13 m(7' 0")

1,68 m(65.97") 0o

1,61 m(63.39") 40o

1,27 m(50.00")

80o

YB5518 Dimensions

Dimensions are with the boom horizontaland the anti-two block bottomed.

2,41 m(7' 1 1")

1,89 m(6' 2.25") 1,17 m

(3' 10")

0,36 m(14.25")

1,98 m(6' 6")

2,38 m(7' 9.5")

4,22 m(13' 10")

1,24 m(4' .75")

0,75 m(2' 5.5")

1,17 m(3' 10.75 ")

2,03 m(6' 8")

0,42 m(1' 4.5")

1,07 m(3' 6")

4,78 m(15' 8")

SEEINSET

0,51 m(1' 8")

1,19 m(3' 1 1")2,42 m

(7' 1 1.25")2,00 m

(6' 6.75")2,17 m

(7' 1.25")4,30 m

(14' 1.25")6,91 m(22' 8")

0,34 m(13.25")

Retracted 5,64 m (18' 6") and Extended 16,61 m (54' 6")

1,83 m(6' 0")

2,13 m(7' 0")

1,68 m(65.97") 0o

1,61 m(63.39") 40o

1,27 m(50.00")

80o

YB5518 Dimensions

Dimensions are with the boom horizontaland the anti-two block bottomed.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Page 13: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 13

Range diagram

YB5518B

oom

and

ext

ensi

on le

ngth

in fe

et

Operating radius in feet from axis of rotation

Hei

ght

from

the

gro

und

in fe

et

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

YB5518

YB55

18

787674727068666462605856545250485644424038363432302826242220181614121086420

787674727068666462605856545250485644424038363432302826242220181614121086420

8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68

8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 18

.5 F

T B

OO

M30

.5 F

T B

OO

M42

.5 F

T B

OO

M54

.5 F

T B

OO

M69

.5 F

T W

ITH

15 F

T JIB

10°

15°

20°

25°

30°

35°

40°

45°50°

55°60°

65°70°

75°80°

Page 14: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

YB5518 LOAD RATING and RANGE DIAGRAMMAIN BOOM LOAD RATINGS ON OUTIGGERS

Extended and Down 360˚ or Retracted and Down Front/Rear18.5 ft BOOM 30.5 ft BOOM 42.5 ft BOOM 54.5 ft BOOM

Radius(ft)

BoomAngle(deg)

RatedLoad(lb)

BoomAngle(deg)

RatedLoad(lb)

BoomAngle(deg)

RatedLoad(lb)

BoomAngle(deg)

RatedLoad(lb)

68101214

15.0161820222426

27.0283032343638

39.04042444648

51.0

64574939250--------------------

36,00031,50024,00019,50016,20015,000

--------------------

7571676358565348433729180-------------

24,50024,50024,00020,00016,80015,50014,40012,50011,0009800870078007400

-------------

7977747168666562495552486

4440363024150------

23,70023,00021,50019,70017,00015,80014,60012,70011,20010,0009000810077007300650057005100450040003900

------

-8077757372716966646159585654514845424139353127210

-17,40015,80014,00012,60012,00011,40010,500960089008300770075007200670060005400480043004000380034003100290027002400

MAIN BOOM LOAD RATINGS ON OUTRIGGERSRetracted and Down 360˚

18.5 ft BOOM 30.5 ft BOOM 42.5 ft BOOM 54.5 ft BOOM

Radius(ft)

BoomAngle(deg)

RatedLoad(lb)

BoomAngle(deg)

RatedLoad(lbs

BoomAngle(deg)

RatedLoad(lb)

BoomAngle(deg)

RatedLoad(lb)

68101214

15.0161820222426

27.0283032343638

39.04042444648

51.0

64574939250--------------------

36,00029,00016,00011,40089008000

--------------------

7571676358565348433729180-------------

24,50024,50020,60012,900990089008100680059005000410036003400

-------------

7977747168666562495552486

4440363024150------

23,70023,00020,00012,80010,200930085007200620052004500380036003300290025002200190017001600

------

-8077757372716966646159585654514845424139353127210

-17,40015,80013,00010,600950085007200610053004500390036003300280025002200200018001700160014001200

900700

The rated loads are the maximum lift capacities as determinedby operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection ofthe axis of rotation to the supporting surface, before loading,to the center of vertical hoist line or tackle with load applied.

The rated loads shown on otriggers do not exceed 85% ofactual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. Retracted outrigger rated loads meet ASME B30.5-2004. These ratings are based on freelyuniform supporting surface. Practical working loads depend onstability. Hazardous surroundings, climatic conditions, experienceaccount by the operator.

The weights of all load handling devices, such as hooks,hook blocks, slings, etc, except the hoist rope, shall beconsidered as part of the load. See above.

Ratings on outriggers are for either outriggers fully extendedand down or fully retracted and down. Ratings for outriggersfully retracted and down will apply for any intermediateoutrigger setting.

Ratings on rubber depend on tire capacity, condition of tiresand proper inflation pressure (120 psi). Loads on rubber maybe transported at a maximum speed of 2.5 mph on a smoothhard level surface with boom retracted to the shortest lengthpossible and centered over front. Do not use jib with craneon rubber.

For operating radius not shown, use load rating of next largerradius.

The maximum combined total boom and deck load is 16,000lb the maximum deck load only is 20,000 lb.

Do not induce any external side loads to boom or jib.

1)

2)

3)

4)

5)

6)

7)

8)

80016678

Radius(ft)

MAIN BOOMON RUBBER

Any Boom LengthFront

Rating(lb)

360˚Rating

(lb)68101214

15.0161820222426

27.0283032343638

39.04042444648

51.0

16,00013,00011,00091007800710065005600480042003600315029502800245021001900175015251450135011501050950850700

10,90087007400640056005300490042003500300025002200205019001650140012001000850775725625525425300200

Jib O�set Angle15° 30°

To 42.5 ftMainBoom

To 54.5 ftMainBoom

AnyBoom

Length

20151050

16001500146014501440

50004400390035003150285026002400225021502080205020001950

---

50004400390035003150285026002400225020501850172015901520

---

35003100280025502350220021002000195019001830

------

15 FT JIB CAPACITIES ON EXTENDED OUTRIGGERSMainBoomAngle(deg)

To 42.5 ftMainBoom

To 54.5 ftMainBoom

807570656055504540353025

---

460038003300290026002400215019301750

NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.

OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.

1000

RATING REDUCTIONS FOR LOADHANDLING DEVICES INSTALLED (lb)

MAIN BLOCK

HOOK & BALLJIB STOWED

JIB DEPLOYED

FROM MAIN BOOM

230

100NO REDUCTION

700

FROM JIB

NOT APPLICABLE

100 NOT APPLICABLE

NO REDUCTION

15˚30˚

SIDE

FRONT REAR

15˚30˚

SIDE

MAXIMUM PERMISSIBLE SINGLE LINE PULL = 9000 LB

WIRE ROPE: 13 mm Diameter 8 X 25 GalvanizedMinimum required breaking strength = 37,200 lb

22002100205020202000

-75006100500043003800340030502800260024002300

14

Load chart

YB5518

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Page 15: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 15

DIN/ISO range diagram

YB5515 (three-section boom)

69˚

60˚

50˚

40˚

30˚

20˚

10˚

18,9

17,7

16,5

17,1

18,3

15,2

14,0

14,6

12,8

12,2

11,6

11,0

13,4

10,4

9,8

9,1

8,5

7,9

7,3

6,7

6,1

5,5

4,9

4,3

3,7

3,0

2,4

1,8

1,2

0,6

0

15,8

16,515,815,214,613,412,2 12,8 14,011,09,89,1 10,48,57,97,36,7 11,66,15,54,94,33,01,8 2,4 3,70,600,61,21,8 1,2

16,515,815,214,613,412,2 12,8 14,011,09,89,1 10,48,57,97,36,7 11,66,15,54,94,33,01,8 2,4 3,70,600,61,21,8 1,218,9

17,7

16,5

17,1

18,3

15,2

14,0

14,6

12,8

12,2

11,6

11,0

13,4

10,4

9,8

9,1

8,5

7,9

7,3

6,7

6,1

5,5

4,9

4,3

3,7

3,0

2,4

1,8

1,2

0,6

0

15,8

Operating radius in meters from axis of rotation

Boo

m a

nd e

xten

sion

leng

th in

met

ers

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Hei

ght

from

the

gro

und

in m

eter

s

Page 16: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

16

DIN/ISO range diagram

YB5515 (four-section boom)

15,8

0,6

1,2

1,8

2,4

3,0

3,7

4,3

4,9

5,5

6,1

6,7

7,3

7,9

8,5

9,1

9,8

10,4

13,4

11,0

11,6

12,2

12,8

14,6

14,0

15,2

18,3

17,1

16,5

17,7

18,9

19,5

20,1

20,7

21,91,21,8 1,2 0,6 0 0,6 3,72,41,8 3.0 4,3 4,9 5,5 6,1 11,66,7 7,3 7,9 8,5 10,49,1 9,8 11,0 14,012,812,2 13,4 14,6 15,2 1,8 16,5 17,1 17,7 18,3 18,9 19,5 20,1

1,21,8 1,2 0,6 0 0,6 3,72,41,8 3,0 4,3 4,9 5,5 6,1 11,66,7 7,3 7,9 8,5 10,49,1 9,8 11,0 14,012,812,2 13,4 14,6 15,2 15,8 16,5 17,1 17,7 18,3 18,9 19,5 20,1

10°

20°

30°

40°

50°

60°

69°

RETRACTED RETRACTED EXTENDED EXTENDED 4,6 m

15,8

0,6

1,2

1,8

2,4

3,0

3,7

4,3

4,9

5,5

6,1

6,7

7,3

7,9

8,5

9,1

9,8

10,4

13,4

11,0

11,6

12,2

12,8

14,6

14,0

15,2

18,3

17,1

16,5

17,7

18,9

19,5

20,1

20,7

21,3

21,9

21,3

Operating radius in meters from axis of rotation

Boo

m a

nd e

xten

sion

leng

th in

met

ers

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Hei

ght

from

the

gro

und

in m

eter

s

Page 17: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series17

DIN/ISO load chart

YB5515 (three-section boom)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

YB5515 3-SECTION BOOM LOAD RATING and RANGE DIAGRAM

NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURALCAPACITY CHART AND MAIN CAPACITY CHART.

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.

OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OFINSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.

1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied.

2) The rated loads shown on outriggers do not exceed 80% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors a�ecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper training must all be taken into account by the operator.

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart.

MA

IN B

OO

MJIB

ON RUBBER (kg)ON OUTRIGGERS (kg)RADIUS(m)

47503840

1750

13101230

14501600

21901950

25703120

14101330

11901080

950870

10801010

1140

2080

16401850

301026602350

3460

1500

26502310

220190

260240

1370

530

350320290

450400

750620

9201130

20901700

400350

470430

1940

830

590

500550

740660

1110950

13201610

1260

F/R 360˚ F/R 360˚

48603600

4,34,64,95,56,16,77,37,98,59,19,810,411,011,412,212,813,414,014,9

1,82,43,03,7

940 750 14028016,0

671059005540490043703920

671059005530

3270299027502320

13 61011 88010 1208440

13 61011 88010 1208440

77106120

77106620

48503950

BOOM

(deg)ANGLE

MAIN

60

40

15

0

3035

4550

-

JIB STRUCTURAL

55

2520

5 -10 -

6965

-

-

--

--

15˚0˚ 30˚

CAPACITIES (kg)

1020

880

980940

1430

11801090

1290

930910

17701590

1270

950

910

11801090

1950

15401380

1720

10401000

920930

27202270

880860840

1070

950910

1000

12701160

4) Ratings on outrigggers are with outriggers fully extended.

5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (8,3 bar). Loads on rubber may be transported at a maximum speed of 1,4 km/h on a smooth hard level surface with boom retracted to the shortest length possible and centered over front.

6) For operating radius not shown, use load rating of next larger radius.

7) The maximum combined total boom and deck load is 7260 kg. The maximum deck load only is 9070 kg.

8) Do not induce any external side loads to boom or jib.

1302539YB

15˚

30˚

15˚

30˚

FRONT REAR

SIDE

SIDE

0 - 13 610 kg4-PART

0 - 3400 kg1-PART

RIGGING CHART

WIRE ROPE: 13 mm diameterMin. breaking strength 128,4 kN.

REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

100 kg

50 kg

0 kg

320 kg

N/A

50 kg

N/A

0 kg

Page 18: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

18

DIN/ISO load chart

YB5515 (four-section boom)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

1) The rated loads are the maximumlifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtainoperating radius. The operating radius is the horizontal distance from a projection of the axis ofrotation to the supporting surface,before loading, to the center ofvertical hoist line or tackle withload applied.

2) The rated loads shown on outriggers do not exceed 80% ofactual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniformsupporting surface. Practicalworking loads depend on supporting surface, operating radiusand other factors a�ecting stability.Hazardous suroundings, climatic conditions, experience of operatorand proper training must be takeninto account by the operator.

3) The weights of all load handlingdevices, such as hooks, hookblocks, slings, etc., except the hoistrope, shall be considered as partof the load. See reduction chart.

4) Ratings on outriggers are withoutriggers fully extended.

5) Ratings on rubber depend on tirecapacity, condition of tires andproper inflation pressure (8,3 bar).Loads on rubber may be transported at a maximum speedof 1,4 km/h on a smooth, hard, levelsurface with the boom retracted tothe shortest length possible and centered over the front.

6) For operating radius not shown, useload rating of next larger radius.

7) The maximum combined totalboom and deck load is 7260 kg.The maximum deck load only is 9070 kg.

8) Do not induce any external sideloads to boom or jib.

NOTES: JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.

OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.

0 - 13 610 kg4-PART

0 - 3400 kg1-PART

RIGGING CHART

WIRE ROPE: 13 mm diameter

Min. breaking strength 128,4 kN.

REDUCTION CHART

MAIN BOOMFROM

RATINGSJIB

FROM

RATINGS

MAIN BLOCK

HOOK & BALL

JIB, STOWED

JIB, DEPLOYED

100 kg

50 kg

0 kg

320 kg

N/A

50 kg

N/A

0 kg

FRONT REAR

SIDE

SIDE

15o

30o

15o

30o

ON RUBBER (kg)ON OUTRIGGERS (kg)

MA

IN B

OO

MJIB

6710

RADIUS(m)

59005540490043703920

17,7

67105900554044503600

1800

12701150

14401600

23402060

26703050

11701090

950870780

- -

810700550

950880

1020

1790

14101590

282024002050

3320

1290

32702990

24002140

-

1209050

170150

1310

470

270230190

400340

650560

8201030

19601620

-

280230150

360320

1720

770

500

400450

670580

990870

11501380

26702160

1020

F/R 360o F/R 360o

19,4 - - --

ON RUBBER (kg)ON OUTRIGGERS (kg)

3760

RADIUS(m)

37203680361035503500

37603720368036103550

1950

12701180

14401660

26202230

30203500

13601260

1040900800650 500

820740640

970890

1070

2120

16901910

318027302350

3460

1550

35203240

33202670

0

1309050

200160

1530

630

370320250

530450

890750

10601280

24201960

110

280240190

350310

2060

910

540

400480

770640

12501080

14701720

30002530

1150

F/R 360o F/R 360o

480 350 020

4TH EXTENDEDBOOM

(deg)ANGLE

MAIN

4TH RETRACTED

60

40

15

0

3035

4550

JIB STRUCTURAL CAPACITIES (kg)

55

2520

510

13 61011 88010 1208440

13 61011 88010 1208440

77106120

7710612048903390

48603950

-503048504200

-503048504200

-5030

-503048504200

48504200

6965

4TH RETRACTED

4TH EXTENDED

15o0o 30o 0o 15o 30o

1020

880

-

980940

1430

11801090

1290

930910

--

17701590

1270

950

910

11801090

1950

15401380

1720

10401000

920930

23502250

880

-

-

860840

1070

950910

1000

--

--

12701160

4,34,64,95,56,16,77,37,98,59,19,810,411,011,412,212,813,414,014,9

1,82,43,03,7

16,017,719,4

4,34,64,95,56,16,77,37,98,59,19,810,411,011,412,212,813,414,014,9

1,82,43,03,7

16,0

1020

880

-

980940

1430

11801090

1290

930910

--

17701590

1270

950

910

11801090

1950

15401380

1720

10401000

920930

27202270

880

-

-

860840

1070

950910

1000

--

--

12701160

Page 19: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 19

DIN/ISO range diagram

YB5518

0

1

2

3

8

4

5

7

6

9

10

11

12

2 1 0 1 2 3 4 5 6 7 8 9 10

5,6

m B

OO

M9,

3 m

BO

OM

80°

70°75°

65°

60°

25°

35°

30°

15°

10°

20°

55°

45°

50°

40°

13

14

15

16

19

17

18

20

21

22

23

24

21,2

m W

ITH

4.6

m JI

B

16,6

m B

OO

M

13,0

m B

OO

M

2 1 0 1 2 3 4 5 6 7 8 9 10

1411 12 13 15 16 17 1918 200

1

2

3

8

4

5

7

6

9

10

11

12

13

14

15

16

19

17

18

20

21

1411 12 13 15 16 17 1918 20

22

23

21

21

24

Operating radius in meters from axis of rotation

Boo

m a

nd e

xten

sion

leng

th in

met

ers

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Hei

ght

from

the

gro

und

in m

eter

s

Page 20: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

20

DIN/ISO load chart

YB5518

13 mm dia. 10 x 19 EIPS IWRC BRIGHTMin. req'd breaking strength = 15 710 kg

WIRE ROPE:

MAXIMUM PERMISSIBLE SINGLE LINE PULL = 4080 kg

12,2

Any Boom Length

2,41,8

3,0

4,34,95,56,16,7

7,98,59,19,810,4

11,6

(m)

11,0

7,3

3,7

Radius Rating(kg)

4950

360o

12,211,911,611,010,4

7,37,98,28,59,1

(m)

4,34,64,95,56,1

3,02,41,8

Radius(kg)(deg)

5,6 m BOOMRatedLoad

BoomAngle

9,3 m BOOM

MAIN BOOM LOAD RATINGS ON OUTRIGGERSExtended and Down 360o or Retracted and Down Front/Rear

RatedLoad(kg)

BoomAngle(deg)

13,0 m BOOMBoomAngle(deg)

RatedLoad(kg)

16,6 m BOOMRatedLoad(kg)(deg)

AngleBoom

7260

(kg)RatingFront

MAIN BOOMON RUBBER

Note: For 360o ratingon rubber, rear axle

locks must be in place.

12,8

14,014,6

13,4

15,5

3,7

6,7

9,8

64 16 330 75 10 560 823079 --

14,615,5

14,013,412,8

be transported at a maximum speed of 1,4 km/h on a smooth

Do not induce any external side loads to boom or jib.

The maximum combined total boom and deck load is 7264

For operating radius not shown, use load rating of next larger

possible and centered over front. Do not use jib with cranehard level surface with boom retacted to the shortest length

kg. The maximum deck load only is 9080 kg.

radius.

on rubber.

7)

8)

6)

hook blocks, slings, etc., except the hoist rope, shall be The weights of all load handling devices, such as hooks,

and proper inflation pressure (8,3 bar). Loads on rubber mayRatings on rubber depend on tire capacity, condition of tires

fully retracted and down will apply for any intermediateand down or fully retracted and down. Ratings for outriggersRatings on outriggers are for either outriggers fully extended

of personnel and proper handling must all be taken intostability. Hazardous surroundings, climatic conditions, experiencesupporting surface, operating radius and other factors a�ectinguniform supporting surface. Practical working loads depend onsuspended loads with the crane leveled, standing on a firm,75% of actual tipping. These ratings are based on freelyactual tipping. The rated loads shown on rubber do not exceedThe rated loads shown on outriggers do not exceed 80% of

to the center of vertical hoist line or tackle with load applied.the axis of rotation to the supporting surface, before loading,operating radius is the horizontal distance from a projection ofby operating radius, boom length and boom angle. TheThe rated loads are the maximum lift capacities as determined

2)

considered as part of the load. See above.

account by the operator.

3)

outrigger setting.

5)

4)

1)

57 14 290 71 10 430 76 808000 586048 10 900 67 10 000 74 777110 580038 8850 63 8880 71 756280 553025 7120 58 7260 68 735610 49200 6390 56 6640 66 725330 4660- - 53 6100 65 715070 4420- - 48 5220 62 684620 4020- - 43 4530 59 664240 3670- - 36 3980 55 643920 3380- - 29 3530 52 613570 3130- - 18 3160 48 593260 2910- - 0 3040 46 583100 2820- - - - 44 562960 2750- - - - 40 542625 2580- - - - 36 512335 2390- - - - 30 482050 2170- - - - 24 451810 1930- - - - 15 421630 1725- - - - 0 401550 1630- - - - - 39- 1540- - - - - 35- 1390- - - - - 31- 1270- - - - - 26- 1150- - - - - 21- 1045- - - - - 0- 930

5680 39504500 33603620 28803040 23902570 20002190 16901890 14301640 12101420 10301220 8701090 740950 630840 525720 430610 340520 270470 215400 165340 120

80450

280230150

NOTES: JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.

OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.

Retracted and Down 360oMAIN BOOM LOAD RATINGS ON OUTRIGGERS

13,0 m BOOM

(deg)AngleBoom

Radius(m) (deg) (kg)(kg)(deg)

5,6 m BOOM

AngleBoom Rated

Load

9,3 m BOOM

AngleBoom

LoadRated

(deg) (kg)(kg)

16,6 m BOOMBoomAngleLoad

RatedLoad

Rated

4,6 m JIB CAPACITIES ON EXTENDED OUTRIGGERS (kg)Jib O�set Angle

8401050 825

830

35

2015

3025

504540

6055

1180

87093010101090

12701380154017301950

MainBoom

757065

80

2270

-

---

-

-

-

--

700630

930

780850

10001070

980

910890

-

940930

118010901020

14301290

30°

1410

11601270

1590200017701590

15°

2270

15,5

11,911,611,010,49,89,18,5

14,614,013,412,812,2

8,2

4,6

6,7

7,97,3

3,7

6,15,54,9

4,3

1,8

3,02,4

1020

565

530530

535550

610680760870

1730

12251460

209027703450

-

To 13,0 m To 16,6 mAngleMain Main(deg) Boom

Any

--

Boom Boom Length2270

15901770

12601420

2000

800940

570625700

520535

1100

--

-

MainBoom

To 16,6 mMainBoom

To 13,0 m

--

--

--

--

------

------

-----

-----

15

------

---

0-

-----

36

2430

4044

7467

48

-----

29180

3643

--

3260370050506890

53565863

62

13101390161018902240

52

4648

5559

270032103530391048606250

65666871

976016 330

71 845010 560

76

26

021

--

170250

42

31353940

----

610

320390470560600650

4548515456

640730830930

1050

720810920

10601210

77

68

5859616466

12201320142016301890

12901380158018102100

71727375

22002590

3320366044805630

244028703140342041805130

80-

75008230

5850-75 79

-------------

48

-----

0

--

2538

5764

3070

HANDLING DEVICES INSTALLED (kg)

HOOK & BALLMAIN BLOCK

FROM MAIN BOOM FROM JIB

RATING REDUCTIONS FOR LOAD

JIB STOWEDJIB DEPLOYED

9543

NO REDUCTION318

NOT APPLICABLE43

NOT APPLICABLENO REDUCTION

30o

SIDE

FRONT REAR

SIDE

15o

30o

15o

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Page 21: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 21

Symbols glossary

Drive

RotationElectrical system

Suspension

Fuel tank capacity

Tires

Engine

Brakes

Outrigger controls

Axles Outriggers

Transmission

Frame

Steering

Lights

Boom elevation

Cab

Swing

Hydraulic system

Hoist

Boom nose

Radius

Boom extension

Boom length

Grade

Gear

Boom

Counterweight

Speed

Oil

Extension

HookblockH

Heavy duty jib

Page 22: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

22

Notes

Page 23: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

Grove YB5500 Series 23

Notes

Page 24: Grove YB5500 Series · YB5515:Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size

©2011 ManitowocPrinted in USAForm No. YB5500 SeriesPart No. 04-022-2M-0411

www.manitowoc.com

This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.

Regional offices

ChinaShanghai, ChinaTel: +86 21 6457 0066Fax: +86 21 6457 4955

Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040

Europe, Middle East, Africa Ecully, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00

Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277

Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062

Regional headquarters

Manitowoc Cranes

ChinaBeijingChengduGuangzhouXian

Greater Asia-PacificAustraliaAdelaideBrisbaneMelbourneSydneyIndiaCalcuttaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore

FactoriesBrazilAlphavilleChinaTaiAnZhangjiagangFranceCharlieuMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFânzeresSlovakiaSarisUSAManitowoc Port WashingtonShady Grove

AmericasBrazilAlphavilleMexicoMonterreyChileSantiago

Europe, Middle East, AfricaCzech RepublicNetvoriceFranceBaudemontCergyDecinesGermanyLangenfeldHungaryBudapestItalyLainateNetherlandsBredaPolandWarsawPortugalBaltarRussiaMoscowU.A.E.DubaiU.K.Buckingham