2015

GRF IMPLANTS

Experienced physicians and professional engineers focusing on developing, designing and

building innovative products for the medical field direct GRF-Dental Implants. Within this

framework, GRF-Dental Implants is focused on original products and systems for dental

applications. Each new product and system developed is supplied with comprehensive

peripheral tooling needed for its successful implementation.

GRF-Dental Implants offers responsive customer support and ongoing professional training

courses to the global community of dental surgeons and technicians. With decades of

collective professional experience, GRF-Dental Implants strives to provide the highest

quality products and systems based on sound engineering principles and excellent

manufacturing practices.

GRF-Dental Implants improves the lives of dentists and patients around the world with the

leading technology in dental implant systems.

Advancements in implant dentistry

GRF-Dental uses science and innovation to create unique dental implant products with

proven esthetic results. Our implants are lightweight, strong, biocompatible and made from

titanium, the most widely used material in implant dentistry. Our dental implants carry a

lifetime warranty and are clinically proven by some of the most thorough and in-depth

research in the industry.

GRF-Dental’s global consumable healthcare product team provides innovative surgical

solutions designed to improve the quality of life for users, caregivers, and practitioners.

Our broad global product platform helps dental professionals serve patients' oral health

care for a lifetime, from preventive services to tooth replacement.

GRF-Dental oral health products range from general dental consumables and laboratory

products to products supporting the dental specialty markets of orthodontics, endodontics

and implants.

With a presence in more than 30 countries, patients and practitioners virtually everywhere

in the world rely on GRF-Dental to deliver dental and healthcare solutions with a strong

focus on quality, innovation, and service.

2

About - GRF Implants

GRF-Dental’s Lifetime Warranty on Implants and Prosthetics: All GRF-Dental’s implants and prosthetic components include a Lifetime Warranty. GRF-Dental’s implant or prosthetic components will be replaced if removal of that product is due to failure(excluding normal wear to over denture attachments).

Conventional dental products such as crowns, bridges and dentures address the short-term cosmetic problem of missing teeth, but do nothing to stop bone loss. Crown & bridge dental products require grinding down healthy teeth to serve as anchors leaving them at a much greater risk for cavities and endodontic failure. Bridges do not stop bone loss. Dentures become uncomfortable and unstable over time as the jawbone shrinks resulting in eating and speech problems.Dental implants transmit chewing forces to the jaw similar to natural teeth, stimulating the jawbone and stopping bone loss. By using dental implants for dental reconstruction, healthy teeth are not compromised. Many leading dental organizations recognize dental Implantology as the standard of care for tooth replacement.

To provide efficient information transfer to customers and distribution partners, GRF-Dental’s provides this "Regulatory & Quality" page for interested parties to access frequently-requested documents that confirm GRF-Dental’s certifications, registrations and licenses. Links to related websites are also provided to access additional regulatory related information.

Deliver solutions "For Better Dentistry" that benefits practitioners and patients everywhere, optimizing our global resources to lead the industry in innovation, quality, and service.

Lifetime Warranty

Dental Implant Products

Certifications, registrations & licenses

GRF-Dental Mission Statement

3

GRF-Dental is directed by experienced physicians and professional engineers focusing on developing, designing and building innovative products for the medical field. Within this framework, GRF-Dental is focused on original products and systems for dental applications. GRF-Dental is a world leader in OEM manufacturing of full dental implant and restoration systems according to client specifications.GRF-Dental With its extensive and sophisticated engineering capability provides a strong platform for engineering and manufacturing current and newly emerging, designs.GRF-Dental offering high quality products, quick response time and very competitive pricing. GRF-Dental develops manufactures, assembles and packages entire product lines of implants and components in accordance with international standards.GRF-Dental designs, develops, manufactures and markets an advanced comprehensive range of dental implants.

Company Profile

Contents

4

Impression components 14

Straight titanium abutments 15-16

Angular Abutments titanium 17

Castable abutments

Attachment systems

Instruments

Implant drills

18

19

20

21

Bone graft material 22

OEM service 23

Surgical Procedure

Bone Types

Spiral Shape Implant

Conical connection Implant

Cylindrical Implant

Stopper Safe Implant

One-piece Implant

Thin Slim implant 2.9 mm

5

6

7

8

9

10

11

12

Healing caps 13

Dental surgery is any of a number of medical procedures that involve artificially modifying dentition, in other words surgery of the teeth and jaw bones.

The traditional implant procedure performed routinely in dental clinics around theworld takes place in phases.

The process begins with an assessment of your mouth and teeth to build a treatment plan. You may be required to have a dental CT or panoramic X-ray. Depending upon the condition of your gum or bone, you may need a bone graft, which is done prior to the implantation.

The implant is positioned in the bone. This process is relatively quick and performed in the office under local anesthestic. Your gums and mouth are given time to heal, and for the implant to integrate with the bone— between three to six months —before the next phase

Site Lance Drill – With proper irrigation, perforate the alveolar crest using a surgical stent, if necessary, as a reference for proper positioning.

Pilot Drill – Select the 1.50 mm Pilot Drill. If any change is needed in trajectory, it may be corrected at this time. With proper irrigation, drill a pilot hole to the appropriate depth marking on the drill.

Check the orientation of the initial osteotomy using a Parallel Pin. If placing more than one implant and parallelism is desired, begin drilling the next site and align as the trajectory of the bone permits

Surgical Drills – Depending on implant diameter and the density of bone at the osteotomy site, it may be necessary to utilize one or more of the Surgical Drills to widen the osteotomy. To avoid over-preparation, widening drill diameters should be used only as necessary, and in proper succession. Select the desired Surgical Drill, accounting for the density of bone at the osteotomy site and the diameter of the implant to be placed. With proper irrigation, drill to the appropriate depth marking on the drill. The final drill for each implant diameter should be based on bone density (soft or hard), as charted below. The goal is to achieve high primary stability upon implant placement.

(Optional) Dense Bone Tap – If indicated by the presence of dense bone, select the Screw Tap with a diameter matching that of the implant. The tap may be used as an alternative to the dense bone drill. Place the tap into the prepared implant site. Apply firm pressure and begin slowly rotating the tap (25 RPM maximum). When the threads begin engaging the bone, allow the tap to feed into the site without applying additional pressure. The osteotomy should be tapped through the cortical bone. Reverse the tap out of the

Surgical Procedure

5

They are four types of bone in the human face and the length of treatment for placing and restoring implants with a tooth and crown depends on witch tapes of bone the implant is placed in. Implants have to integrate with the surrounding bone before a tooth and crown is placed on it.

Type I:bone is comparable to oak wood, which is very hard and dense. This type of bone has less blood supply than all on the rest of the types of bone. The blood supply is required for the bone to harden or calcify the bone next to the implant. Therefore, it takes approximately 4 mounts for this type to integrate with an implant as opposed to 4 mounts for type II bone;

Type II:bone is comparable to pine wood, which isn't as hard as type I. This type of bone usually takes 4 mounts to integrate with an implant;

Type III:bone is like balsa wood, which isn't as dense as type II. Since the density isn't as great as type II, it takes more time to "fill in" and integrate with an implant. 6 months’ time is suggested before loading an implant placed in this type of bone. Extended gradual loading of the implant can, however, improve the bone density.

Type IV:bone is comparable to styrofoam, which is the least dense of all of the bone types. This type takes the longest length of the time to integrate with the implant after placement, which is usually 8 months. Additional implants should be placed to improve implant / bone loading distribution. Incremental loading of the implants over time will improve bone density. Bone grafting or augmentation of bone are often required. Bone expansion and or bone manipulation can improve initial implant fixation

Bone Types

6

ImplantDiameter

LanceDrill

PilotDrill

Surgical Drill

2.00 mm

3.30 mm

3.75 mm4.20 mm

5.00 mm

6.00 mm

2.80 mm 3.20 mm 3.65 mm 4.20 mm 5.20 mm

The Spiral Dental Implant, leading implant, has exceptional self-drilling capabilities and a unique spiral body design which enables it to change its position during placement and obtain very high primary stability also in very complicated clinical cases.

Bone condensing properties and high primary stability.Self-directing during insertion.Enables the changing of direction for optimal restorative position.Enables a smaller osteotomy, resulting in minimal bone loss and reduced trauma.Enables narrow ridge expansion.Reduces the risk of damaging neighboring teeth.Reduces the risk of perforating the lingual or buccal cortex.

Clinical Advantages:

Spiral Shape Implant

ImplantDiameter

LanceDrill

PilotDrill

Surgical Drill

2.00 mm

3.30 mm

3.75 mm4.20 mm

5.00 mm

6.00 mm

2.80 mm 3.20 mm 3.65 mm 4.20 mm 5.20 mm

Dia.Length

6mm

8mm GR-SP3308 GR-SP3708

GR-SP3710

GR-SP3711

GR-SP3713

GR-SP3716

GR-SP4206

GR-SP4208

GR-SP4210

GR-SP4211

GR-SP4213

GR-SP4216

GR-SP5006

GR-SP5008

GR-SP5010

GR-SP5011

GR-SP5013

GR-SP5016

GR-SP6006

GR-SP6008

GR-SP6010

GR-SP6011

GR-SP6013

GR-SP3310

GR-SP3311

GR-SP3313

GR-SP3316

10mm

11.5mm

13mm

16mm

3.75 mm 4.2 mm 5.0 mm 6.0 mm3.3 mm

7

8

Conical Implants share the same three-thread zone concept as Spiral’s Implants. The Conical Implants converging coronal shape allows platform switch technology to prevent crystal bone loss.Recommended for all bone types and all Procedures.

SCREW CONICAL. HEX IMPLANTS 2.5 MMD (STANDARD)

Positions:

Regu

lar p

latf

orm

RP

4.3

and

5.0

mm

Nar

row

pla

tfor

m N

P 3.

5 m

m

Maxilla & posterior mandible.Outstanding bone penetration capabilities:Double thread and optimal pitch (gap) for efficient implantationBone conservationLess friction and bone heatingFast insertion

Conical connection Implant

ImplantDiameter

LanceDrill

PilotDrill

Surgical Drill

2.00 mm

3.50 mm

4.30 mm

5.0 mm

2.80 mm 3.20 mm 3.65 mm 4.20 mm 5.20 mm

Dia.Length

6 mm

8 mm

10 mm

11.5 mm

13 mm

GR-CI4306

GR-CI4308

GR-CI4310

GR-CI4311

GR-CI4313

4.3 mm

GR-CI5008

GR-CI5010

GR-CI5011

GR-CI5013

5.0 mm

GR-CI3508

GR-CI3510

GR-CI3511

GR-CI3513

3.5 mm

GR-CHCNP3

NP Height 3 mm

GR-CHCNP4

NP Height 4 mm

GR-CHCNP5

NP Height 5 mm

GR-CHCRP3

RP Height 3 mm

GR-CHCRP4

RP Height 4 mm

GR-CHCRP5

RP Height 5 mm

GR-CARP9

RP Ø 4.50 L 9 mm

GR-CSARP1

RP Ø 4.50 L 9 mmSH 1 mm

GR-CSARP2

RP Ø 4.50 L 10 mmSH 2 mm

GR-CSANP2

NP Ø 3.9 L 10 mmSH 2 mm

GR-NP 15 degree

NP Ø 4.2 L 9 mm

GR-RP 15 degree

RP Ø 4.50 L 9 mm

GR-RP plastic sleeve

RP Ø 4.40 L 9 mm

GR-NP plastic sleeve

NP Ø 4.2 L 9 mm

Similar with Nobel Active platform

GR-CAN

RP Analog

GR-CANN

NP Analog

GR-NP open tray

NP Ø 4.2 L 12 mm

GR-NP close tray

NP Ø 4.2 L 8 mm

GR-RP open tray

RP Ø 4.75 L 12 mm

GR-RP close tray

RP Ø 4.75 L 8 mm

GR-CANP9

NP Ø 3.9 L 9 mm

GR-CSANP1

NP Ø 3.9 L 9 mmSH 1 mm

GR-CSARP3

RP Ø 4.50 L 11 mmSH 3 mm

GR-CSANP3

NP Ø 3.9 L 11 mmSH 3 mm

9

Cylindrical implants are specially designed for treatments involving type I and sometimes type II bone placements.The Cylindrical is a tapered implant with a variable thread design, double thread 2 x 1.2 mm thread. The tapered design allows the implant to be placed in the ideal position for improved esthetics and better load distribution.

A generally cylindrical dental implant for placement in a jaw bone comprising a body portion including an apical end and a first threaded outer surface, said implant further comprising a longitudinal axis, said first threaded outer surface extending along said longitudinal axis to said apical

Better control during placement.Greater initial placement stability.Self-drilling, self-tapping feature.

Clinical Benefits:

Cylindrical Implant

end, said implant also comprising a no threaded collar continuously diverging as the distance along said longitudinal axis from said apical end increases, said implant also comprising an abutment onto which an item selected from the group of an artificial crown, denture, or prosthesis may be attached, said collar located between said abutment and said body portion at a location such that it will be wedged against or into the jaw bone and extend beyond the jaw bone into gingival tissue when said implant is positioned in the jaw bone as intended, said body portion and said collar not decreasing in diameter as the distance along said longitudinal axis from said apical end to said collar increases.

ImplantDiameter

LanceDrill

PilotDrill

Surgical Drill

2.00 mm

3.30 mm

3.75 mm4.20 mm

5.00 mm

6.00 mm

2.80 mm 3.20 mm 3.65 mm 4.20 mm 5.20 mm

Dia.Length

8 mm GR-CS3308 GR-CS3708

GR-CS3710

GR-CS3711

GR-CS3713

GR-CS3716

GR-CS4208

GR-CS4210

GR-CS4211

GR-CS4213

GR-CS4216

GR-CS5008

GR-CS5010

GR-CS5011

GR-CS5013

GR-CS5016

GR-CS6008

GR-CS6010

GR-CS6011

GR-CS6013

GR-CS3310

GR-CS3311

GR-CS3313

GR-CS3316

10 mm

11.5 mm

13 mm

16 mm

3.75 mm 4.2 mm 5.0 mm 6.0 mm3.3 mm

10

A special implant designed for a safe use in a depth small bone. The round shape of the vertex, protects the sensitive anatomical area (sinus and nerves) and its deeper turns increase the integration with the bone.

Although it's a short implant, it has many spirals - a 7mm Stopper's spirals are equal to a length of a different Implant's spirals of 11.5mm The spirals are very deep and the ostear integration is equal to a 11.5mm Implant.

The Stopper Implant has a table stopper at his end (and therefore its name) which prevents it from sinking on one hand, and on the other one it stabilizes the implant in the pateint mouth due to to its wide & short size.

This patent has been successfully used by many doctors around the world, mainly in Europe and USA.

Stopper Safe Implant

ImplantDiameter

LanceDrill

PilotDrill

Surgical Drill

2.00 mm

3.30 mm

3.75 mm4.20 mm

5.00 mm

6.00 mm

2.80 mm 3.20 mm 3.65 mm 4.20 mm 5.20 mm

Dia.Length

6mm

7mm

8mm

GR-SHORT4206

GR-SHORT4207

GR-SHORT4208

GR-SHORT5006

GR-SHORT5007

GR-SHORT5008

4.2 mm 5.0 mm

11

This one-piece, self-tapping implant, with integrated abutment, was designed for single-stage implantation to stabilize a tissue-supported denture.

Designed for placement in a very narrow ridge, or in ridges with a small mesiodistal space, one-piece features a unique thread for immediate insertion. The implant can be placed in all types of bone and can be subjected to immediate load.

The implants are specifically indicated for replacing maxillary lateral incisors and mandibular central and lateral incisors. They are cleared for immediate, non-occlusal provisionalization in single-tooth restorations. Multiple-unit restorations should be splinted together and may be used immediately, when clinically appropriate.

One-piece

ImplantDiameter

LanceDrill

PilotDrill

Surgical Drill

2.00 mm

2.40 mm

3.0 mm

2.50 mm 3.20 mm 3.65 mm 4.20 mm 5.20 mm

Dia.Length

10mm

11mm GR-OP2411

GR-OP2410 GR-OP3010

GR-OP3011

GR-OP3013

GR-OP3016

GR-OP241313mm

16mm

3.0 mm2.4 mm

Dia.Length

12

A Thin Slim conical implant is used for the installation in cases of narrow crest or between closely situated teeth implants, and also between permanent implants for temporary restoration. It may be used for immediate loading.Thin Slim Implant are specifically indicated for replacing maxillary lateral incisors and mandibular central and lateral incisors. They are cleared for immediate, non-occlusal provisionalization in single-tooth restorations. Multiple-unit restorations should be splinted together and may be used immediately, when clinically appropriate.

Thin Slim implant 2.9 mm

Thin implant components

ImplantDiameter

LanceDrill

PilotDrill

Surgical Drill

2.00 mm

2.9 mm

2.80 mm 3.20 mm 3.65 mm 4.20 mm 5.20 mm10 mm

11.5 mm

13 mm

16 mm

GR-TH2910

GR-TH2911

GR-TH2913

GR-TH2916

2.9 mm

GR-THC02

Height 2 mm

GR-THC03

Height 3 mm

GR-THC04

Height 4 mm

GR-THC05

Height 5 mm

GR-TTA

3.6 mm

GR-HN

Analog

GR-TBA01

GR-TBA02

GR-TBA03

GR-TBA04

GR-MC

Metal cap

GR-SC

Silicone cap

GR-TPH

Plastiv sleeve

GR-TTO12

3.6 mm L 12 mm

513

Healing capsThe healing cap prepares the site for the superstructure insertion and “shapes” the soft tissue surrounding the implant. Selecting the correct healing cap depends on the thickness of the mucosa. Wide healing caps are used for soft-tissue contouring of molars and premo-lars. Recommendation: Hand-tighten using a 1.25 mm hex driver or a motor mount with a torque of 15 Ncm

There is an internal relief ring on the inner side of the surface which is lockedon the tightening ring of the abutment.This aids precision and maximizes retention over the external surface.The cap is formed without an internal ring and has a smooth external surface.

GR-H002

Height 2 mm

GR-H003

Height 3 mm

GR-H004

Height 4 mm

GR-H005

Height 5 mm

GR-H006

Height 6 mm

GR-H007

Height 7 mm

GR-HW002

Height 2 mm

GR-HW003

Height 3 mm

GR-HW005

Height 5 mm

GR-HW006

Height 6 mm

GR-HW004

Height 4 mm

Healing cap 4.6 mmPlatform 3.75 mm

Healing cap 5.5 mmPlatform 3.75 mm

Open & Close Tray TransfersTransfers are designed for impressions using the open-tray technique when the retentions are sharp, and for the closed-tray technique when the retentions are round. The body of the Transfer is made of stainless steel; the screws are made of titanium alloy.

Snap TransferThe Ball Transfer is made of titanium alloy TI-6AL-4V and designed for impressions using the closed-tray technique, in conjunction with the plastic caps (Ø 4.80 mm and Height 11.00 mm). The cap remains in the impression tray after it is removed from the mouth, for precise positioning of the Snap Transfer. It is also possible to use this type of Transfer as aesthetic abutments.

Clip-On TransferA Clip-On Transfer for impressions without a screw has a hexagonal lock to ensure a tight fit. It is especially effective with molars and premolars, where there is lack of space, and where working with a driver is difficult. It is sufficient to use this Transfer for all types of impressions as the lack of screws saves a significant amount of time.

Dental Implant AnalogThe Analog is made of stainless steel and is used for a laboratory fabricated implant level cast models. Compatible to all implant level components with a 3.75 platform.

Impression components

14

GR-CT Close tray

Ø 4.75 mm L 8 mm

GR-OT Open tray

Ø 4.75 mm L 12 mm

GR-WOP Open tray

Ø 5.5 mm L 12 mm

GR-STA09

Ø 4.50 L 9 mm

GR-SPA09

Ø 4.75 L 9 mm

GR-CCT

Ø 4.75 mm L 8 mm

GR-AN

Ø 4.0 mm L 12 mm

GR-CCTL

Ø 4.75 mm L 12 mm

GR-WAN

Ø 5.0 mm L 12 mm

15

Straight titanium abutmentsA wide variety of titanium straight abutments are available for use in different situations. These abutments remain stable, even when their wall thickness is reduced to 0.1 mm. They are used in the fabrication of cement-retained restorations, single crowns or bridges. Recommendation: Tighten the screw at a torque between 25 to 30 Ncm.

They can be used with two platforms; normal and narrow.The bevel area and the counter slot design prevent superstructure rotation and ensure tight contact and swift healing of the abutment.Peripheral tightening, along with the ring section of the abutment, enables simple and precise insertion and mounting. Clinicians can attach a coping or temporary reconstruction to the abutment.The internal hexagon leads to the implant installation area and uses a driver that fastens to the implant after the abutment's removal. This is undertaken using either a manual driver or a driver that is connected to hand unit.Internal tapping configuration prevents the fastening screw's disengagement from the implant.The abutment serves as a channel that prevents contact and friction between inserted pieces and the internal hexagonal of the implant.

GR-STA05

4.50 mm L 8.5 mm

GR-STA07

4.50 mm L 9.5 mm

GR-STA09

4.50 mm L 10.5 mm

GR-STA11

4.50 mm L 11.5 mm

GR-SNA05

3.80 mm L 5.0 mm

GR-SNA07

3.80 mm L 7.0 mm

GR-SNA09

3.80 mm L 9.0 mm

GR-SNA11

3.80 mm L 11 mm

Straight abutment

Straight narrow abutment

GR-STSH01

Ø 4.50 mm L 8.5 mm SH 1.0 mm

GR-STSH02

Ø 4.50 mm L 9.5 mm SH 2.0 mm

GR-STSH03

Ø 4.50 mm L 10.5 mm SH 3.0 mm

GR-STSH04

Ø 4.50 mm L 11.5 mm SH 4.0 mm

GR-SWA9

Ø 5.5 mm L 8.5 mm

GR-SWA01

Ø 5.5 mm L 8.5 mm SH 1.0 mm

GR-SWA02

Ø 5.5 mm L 9.5 mm SH 2.0 mm

GR-SWA03

Ø 5.5 mm L 10.5 mm SH 3.0 mm

GR-SAA01

Ø 5.20 mm L 9.0 mm SH 1.0 mm

GR-SAA02

Ø 5.20 mm L 10.0 mm SH 2.0 mm

GR-SAA03

Ø 5.20 mm L 11.0 mm SH 3.0 mm

Straight shouldered abutment

Wide abutment

Straight aesthetic abutment

16

17

Angular Abutments titaniumAngular abutments are used for constructing cement-retained single crowns or bridges or when changing the axis of the implant is required. The abutments are available at angles of 15° and 25°. Recommendation: Tighten the screw at a torque between 25 to 30 Ncm.

There are several different kinds of materials that can make up a dental abutment. For example, ceramic, gold, titanium, or a high noble metal is all good materials for the abutment. A frank discussion between the patient and the dentist or dental surgeon will usually be the deciding factor in the type of abutment; however, there are advantages and disadvantages for each material. Titanium abutments respond well to the gum tissue when it comes to implant attachment, but gold is best for porcelain crowns because it lends to a more natural tooth coloring. Ceramic abutments are popular because they resist fracturing, look good, and allow light to flow through the crown, giving it the most natural coloring

GR-AB15

4.50 mm L 9.0 mm

GR-AB15-1

5.40 mm L 9.5 mm SH 1.0 mm

GR-AB15-2

5.40 mm L 10.5 mm SH 2.0 mm

GR-AB15-3

5.40 mm L 11.5 mm SH 3.0 mm

GR-AB25

4.50 mm L 9.0 mm

GR-AB25-1

5.40 mm L 9.5 mm SH 1.0 mm

GR-AB25-2

5.40 mm L 10.5 mm SH 2.0 mm

GR-AB25-3

5.40 mm L 11.5 mm SH 3.0 mm

GR-ABL25

4.50 mm L 11.0 mm

GR-ABL15

4.50 mm L 11.0 mm

Angulated abutment 15 degree

Angulated abutment 25 degree

Castable abutmentsTemporization using PEEK Temporary Abutments is simple, cost-effective, and results in high patient satisfaction. There are two options when utilizing these abutments, cement-retained and screw-retained. They can be used for both single and multi-unit cases.

PEEK (polyetheretherketone) is a high-grade thermoplastic polymer for use in medicine generally, and dentistry specifically. PEEK is characterized by a superior combination of strength, elasticity and resilience. It is one of the most chemically resistant materials. Biocompatible and aesthetic, with a low electrical conductivity, PEEK polymer is well suited for use in the oral cavity.

18

GR-PH

With hexagone

GR-BS

Silicone cap

GR-RP 4.3 MM

Conical plastic

GR-PH

With hexagone

GR-BS

Silicone cap

GR-PHB

Plastic with titanium base

GR-NP 3.5 MM

Conical plastic

The Locator Implant Attachment is available in stock to fit all major implant systems. Locator Implant Abutments for overdenture applications are available in numerous tissue cuff heights. Choose the corresponding abutment tissue cuff height that exactly equals the tissue measurement, or the next higher size. With proper tissue cuff height selection, the 1.5mm working portion of the attachment will remain above the gingival tissue.

19

Attachment systemsThe Multi-Unit system provides a solution for screw-retained prostheses; even on complicated-to-restore implants (for example, multiple tilted implants). The Multi-Unit system comprises a full range of sizes for both the upper and lower jaws: a straight adaptor,

Company’s attachments systems includes Ball Attachments for overdenture restorations.Variable heights of attachments allows restorations of any kind gingival depth sockets.Different kinds of nylon inserts resilience allows to the dentists to choose the right

GR-LS

Silicone + cap

GR-LC01

Height 1 mm

GR-LC02

Height 2 mm

GR-LC03

Height 3 mm

GR-LC04

Height 4 mm

GR-LC05

Height 5 mm

GR-LC06

Height 6 mm

GR-BA01

Ball 1 mm

GR-BA02

Ball 2 mm

GR-BA03

Ball 3 mm

GR-BA04

Ball 4 mm

GR-BA05

Ball 5 mm

GR-BA06

Ball 6 mm

GR-SC

Silicone cap

GR-MC

Metal cap

GR-MU01

Multi unit 1 mm

GR-MU02

Multi unit 2 mm

GR-MU03

Multi unit 3 mm

GR-MU04

Multi unit 4 mm

GR-TSMU

Titanium sleev

GR-PSMU

Plastic sleeve

GR-AMU

Analog for MU

GR-TRMU

Transfer for MU

GR-FSMU

Screw for MU

InstrumentsDental instruments are the tools that dental professionals use to provide dental treatment. They include tools to examine, manipulate, restore and remove teeth and surrounding oral structures.

Standard instruments are the instruments used to examine, restore and extract teeth and manipulate tissues.

20

GR-OP07 GR-RR GR-RTGR-OP15

Ø 2.1 mm L 6 mm Regular ratchet Torque ratchet

GPR-H15 GR-DPGR-H07

Ø 1.25 mm L 7 mm Ø 1.25 mm L 15 mm Depth probe

GR-Paralel pin short

Lenght 10 mm

GR-Paralel pin long

Lenght 16 mm

Ø 2.1 mm L 10 mm External hex 2.42 mm

GR-Surgical driver

GR-HDS07 GR-HDS15

Ø 1.25 mm L 7 mm Ø 1.25 mm L 15 mm

GR-HD07 GR-HD15

Ø 2.42 mm L 7 mm Ø 2.42 mm L 15 mm

21

Implant drillsThe dental drill is a tool used by dentists to bore through tooth enamel as well as to clean and remove plaque from the tooth’s surface. It is composed primarily of a headpiece, an air turbine, and a tungsten carbide drill bit. Since its development began in the mid-1700s, the dental drill has revolutionized the field of dentistry. The modern dental drill has enabled dentists to work more quickly and accurately than ever before, with less pain for the patient.

Kit of 35 Stopper drills Surgical kit

GR-MD19

Mark drill

GR-DE20

Drill 2.0 mm L 16 mm

GR-DE25.

Drill 2.5 mm L 16 mm

GR-DE28

Drill 2.8 mm L 16 mm

GR-DE32 GR-DE365 GR-DE42. GR-DE52

Drill 3.2 mm L 16 mm Drill 3.65 mm L 16 mm Drill 4.2 mm L 16 mm Drill 5.2 mm L 16 mm

GR-ED

Extender drill

The GRF Dental Implants Drill Stopper Kit is designed to simplify the drilling process and save valuable chair time. It enables the doctor to drill the exact desired depth with safety and confidence.Incredibly simple to use• Designed by doctors for doctors• Turns procedures into streamlined, simpler one• Builds on industry best practices for step-drills• Increases precision• Saves chair time and increases confidence• Passive turning drill stopper technology

The GRF Dental Implants Drill Stopper Kit is designed to simplify the drilling process and save valuable chair time. It enables the doctor to drill the exact desired depth with safety and confidence.Incredibly simple to use• Designed by doctors for doctors• Turns procedures into streamlined, simpler one• Builds on industry best practices for step-drills• Increases precision• Saves chair time and increases confidence• Passive turning drill stopper technology

22

Bone graft materialBon-Graft is a synthetic bone based om two polymersPolylactic Acid(PLA)- The PLA is biogradable biocompatible non toxic polymerused in medical implants, tissue enginering,orthopedic use etc...Polyglicolic Acid (PGA) used in resorbable sutures,in nerve reconstruction,in dermal and fracture repair The Graft exist in tree formsGel in Syringe-can fill difficult acess defects- Use in sinus elevationpowder form-stick more than oters to the bone and more soft then B-TCP Sponge form-can fill great destroyed areas like plaster without membrane help The polymers are not Radio-opaqueYou can control bone construction with x-ray periodic radiologyOsteoblast will replace the fillings construction with human bone till full resorbtion

In a study of Piatellioral implantology 2003;4; 77-80it is shown that in comparation with all oter bone replacethe best resorbtion is in bon-graft all the oterths show higher residual material

Gel typeSponge type

Powder type1 gramm package

Sterile package

0.8 cc package

Sterile package

1 gramm package

Sterile package

OEM serviceThe GP™ Group is one of Israel's largest companies for providing industrial solutions. The solutions group offers include consultation, planning, engineering, manufacture, assembly and installation.GP™ Group has modern machines that are the most sophisticated in the market, unique and exclusive type in Israel.GP™ Group machines perform all turning and milling operations in one process. One process machining – from raw material directly to finished product.

23

NOBEL ACTIVE PLATFORM

Available in stock

NOBEL REPLACE PLATFORM

Available in stock

16b NURIT ST. SHLOMI ISRAEL

TEL: ּּּּּּ+972-52-8404047

GRF IMPLANTS