Green Hope High School Technical Theater Safety Rules and Regulations The important rules that everyone must follow when working on the stage or in the

Green Hope High School

Technical Theater

Safety Rules and Regulations

The important rules that everyone must follow when working on the

stage or in the shop areas.


• The following power point is a list of rules and regulations that each student must practice on the PNGHS stage and shop areas. In order for a student to take part in the many hands-on activities that we will be doing, he/she must pass with an 90 or higher on the written safety test. This is the information is what you must know to pass.


• 1. Keep the workshop clean and tidy at all times.


• 2. Make sure work areas are clear and safe for work to be done.


• 3. Always seek instruction before using an unfamiliar piece of equipment.


• 4. Only use tools and machines for their intended purpose.


• 5. Report all damaged equipment and do not use it until it is repaired.


• 6. Do not remove, alter, or disable any guard or safety devices on any power tool.


• 7. Never distract the attention of another staff member when a person is operating equipment.


• 8. NEVER indulge in horseplay.


• 9. Report all hazards and unsafe conditions and work practices to the Technical Director.


• 10. You may not use a piece of equipment until you have been checked out on that piece of equipment.


• 11. ALWAYS wear closed toe shoes, eye and ear protection, and appropriate clothing on the stage and shop areas.


• This means:–Do not wear rings, ties, or loose clothing when operating machinery.

–Do not wear sandals or flip flops when on stage or shop areas only hard-sole shoes.


• This means:–Wear safety glasses when cutting or drilling materials.

–Face masks should be worn when working with paints and such materials.

–Do not wear shorts when working on stage.


• This means:–Long hair should be tied back.

–Remove all dangling necklaces, scarves, etc.

–Ear protection may be worn at your discretion.


• 12. Make sure depth and thickness levels are properly set on all cutting blades.


• 13. Never operate equipment until guards are in place and working properly.


• 14. Be aware of others around so that nothing is thrown from the a saw, which may cause injury.


• 15. Make sure all on and off switches are in proper working condition.


• 16. Keep hands and clothing away from cutting surfaces.


• 17. Never adjust settings on machinery until switch is off and blades have ceased to rotate.


• 18. Use safe lifting practices.


• This means:–Make sure you can physically lift the weight.

–Get as close to the object as possible for picking it up.

–Make sure your footing is secure.


• This means:–Do not twist while lifting.–Lift smoothly but not slowly. Do not jerk the load.

–Bend at the knees not your waist and keep back straight.

–Get someone to help you.


• This means:

www.labsafety.com


• 19. Never work alone in the shop or shop areas.


• 20. Never work in the scene shop without direct supervision from the teacher.

Quiz Time

• Which of the following shoes would be the best choice for working in a shop?

Quiz Time

• Which items are acceptable to wear in the shop?

Quiz Time

• Which of the following people displays correct lifting?

Quiz Time• T or F Never work alone in a scene

shop.

• T or F You may use equipment that you have not been

checked out on.

• T or F The teacher doesn’t have to be present for students to

use power tools.

Quiz Time• T or F Dull blades are okay for use on

lumber.

• T or F Keep hands away from cutting areas.

• T or F Your workplace should be neat and tidy at all times.

Quiz Time• T or F It is not necessary to report

damage to tools and equipment.

• T or F Always check depth and thickness of cutting blades.

• T or F Ear plugs are optional at your discretion.

Quiz Time

• Which picture best represents horseplay?

Quiz Time

• Which picture shows the best use for a staple gun?

Quiz Time

• Which of the following safety devices do you have a choice in wearing?

Quiz Time• T or F Always seek instruction before

using unfamiliar tools.

• T or F Never distract the tech director when someone is operating equipment.

• T or F Report all unsafe conditions to the tech director.

Quiz Time• T or F Make sure all on and off

switches are working properly.

• T or F Be aware of others around you.

• T or F Never adjust settings while the blade is rotating.

Documents

Green Hope High School Technical Theater Safety Rules and Regulations The important rules that everyone must follow when working on the stage or in the