Grader - 3-Point HitchCG-18AX-TR/CG-24AX-TR

26 Spruce Park Dr, Strathmore, Alberta Canada T1P 1J2

Toll Free: 1-877-947-2882conterraindustries.com

FLOAT & LEVELThe twin grader blades and an open back design are the keys to operating efficiency and performance. Material accumulates between the twin blades to maximize downward cutting pressure and keep the blades in constant contact with the ground. This allowsthe Conterra Grader to cut out high spots and carry the material to low spots. The open back design allows material to be constantly processed out the back, providing a uniform and level finish.

RECLAIM GRAVELThe Conterra Grader cuts out gravel that has been packed in the road over time and brings it back to the surface. As the grader moves forward, material collectsand mixes between the twin blades and starts to turn.This cyclonic turning action mixes and breaks apart the material in the hopper, allowing finer material to filter to the bottom and leaving gravel on the top of thesurface where it belongs.

SPEED & EFFICIENCYThe Conterra Grader provides constant control over the material being worked, helping to increase productivity. The 3-point hitch can be used to raise and lower the grader, allowing theattachment to be manoeuvred into place quickly.The angled blades help to move material from side to side to help keep the gravel away from the edges of your grass. These angled blades also provide a crowned finish.

Model# CG-718AX-TR(Angle Blades)

After Before

7

Features:

- Connects to any tractor with a Category I or II 3-point hitch - 18AX-TR Series CAT I Hitches - 24AX-TR Series CAT II Hitches- Simple and efficient to operate- 18AX-TR Series graders feature an 18" side panel- 24AX-TR Series graders feature an 24" side panel- Easy to maintain. Contains no moving parts, hoses or rams- Adjustable skid shoes allow cutting height to be set to preference and allow for wear- Blades can be lowered on the mould board to extend life after wear- Uses standard grader blades for ease of replacement - Available in 5', 6', 7', 8', 9' & 10' widths with angled blades- Ideal for tractors with 25 HP and up- Skid shoes are reversible, replaceable and made of hardened steel- Leaves no windrows- Manoeuvrable in confined spaces- Gridlock manufacturing techniques provide greater strength with less overall weight- 1 Year Warranty - Manufacturer’s Defect - Heavy duty construction and black paint finish

26 Spruce Park Dr, Strathmore, Alberta Canada T1P 1J2

Toll Free: 1-877-947-2882conterraindustries.com

Adjustable & Replaceable Skid Shoes

Grader - 3-Point HitchCG-18AX-TR/CG-24AX-TR

Grader Hopper Blade Grader HP

Model # Width Height Position Weight Requirement

CG-518AX-TR 60" 18" Angled 800 lbs 25

CG-618AX-TR 72" 18" Angled 850 lbs 30

CG-718AX-TR 84" 18" Angled 970 lbs 35

CG-824AX-TR 96" 24" Angled 1650 lbs 50

CG-924AX-TR 108" 24" Angled 1800 lbs 65

CG-824AX-TR 120" 24" Angled 1650 lbs 85

Specifications

3-Point Hitch

Twin & Angled Grader Blades

8