Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
▶Standard type
UB 1 N
UB
UBT
Symbol
Stainless steel mini ball valveLever handle
Stainless steel mini ball valveT-handle
Type
SymbolNo symbol
N
Body materialSCS13ASCS14A
Symbol012
1-stage2-stage
Reduced bore
Full boreBore diameter
Product Codes of General Valves
▶Standard type
U □ ※ F D □Symbol
No symbolM
SymbolSGD
CSCT
SymbolFS
SymbolNo symbol
1020150
SymbolU
Body materialStainless steel
Body materialSCS13ASCS14A
Shape of connectionFlangedScrewed
TypeGate valveGlobe valve
Globe valve with discSwing check valve
Lift check valveStrainer
Shape of connectionH series 10KS series 10KS series 20K
S series 150Ib
50A
50A
※The H-series valves with the “E” symbol are those with Hitachi Valve’s standard specifications. “E” stands for Economical. Example: UESG
Example: H-series
Globe valve with stainless steel 10K disc
Production size
Ball Valve Product Codes
▶Standard type
BU 10 F 1 B□
Symbol1020150300
SymbolBU
TypeBall valve (stainless steel)
Nominal pressure10K20K
150Ib300Ib
SymbolFS
Shape of connectionFlangedScrewed
Symbol1
Bore diameterFull-bore, fire-safe
SymbolNo symbol
MO
Body materialSCS13ASCS14ASCS16A
Production size
Production size½
Edition dated March 2016
Product WarrantyWithin eighteen months of completion inspection or within twelve months of the start of usage, whichever is shortest, Hitachi Valve will repair or replace products or the faulty components of products free of charge in the event of failure under normal usage attributable to inadequate design or manufacturing on the part of Hitachi Valve. However, repairs or replacements will be charged in any of the following cases. Also note that if a separate agreement is in effect, that agreement shall take precedence.
(1) When the product has been used in an incorrect manner which deviates from the catalog or instruction manual;(2) When the product failure is due to careless handling such as jamming with foreign substances or the sticking of excessive water stains;(3) When the product has been disassembled, repaired or altered by a third party other than Hitachi Valve;(4) When the product has been subject to causes beyond the control of Hitachi Valve including natural disasters such as wind or flood damage, earthquakes and electrical storms, fire, pollution (special environments), salt damage, war or acts of terror;(5) When a failure is due to any other factor not deemed to be the responsibility of Hitachi Valve. Damage caused by use, failure, defect, etc. of the product are excluded from the scope of warranty by Hitachi Valve.
EST2016①1
• The product specifications, performance values and prices listed in this catalog are based on general conditions of use and are intended as guidelines for selecting models. Please confirm product specifications and conditions including fluids, temperatures and pressures before selecting a product.• The products listed in this catalog are not designed or manufactured for applications that require a special quality level, such as medical equipment, nuclear generation facilities or airplanes.• The products listed in this catalog are designed to be used within Japan. When exporting the products, the exporter will need to obtain an export license from the Ministry of Economy, Trade and Industry based on the provisions of the Export Control Order under the Foreign Exchange and Foreign Trade Act.• Please note that to improve this catalog, the contents may be changed or revised without prior notice. Please be aware that product catalogs published prior to such revisions are not valid.• The contents of this catalog are copyright of Hitachi Valve, Ltd. Duplication without permission is strictly prohibited. For inquiries, please contact your nearest Hitachi Valve sales office.• When using a product listed in this catalog, please follow the precautions listed in its instruction manual and use it properly.
Agent
http://www.hitachi-valve.co.jp[Obtained ISO9001 & ISO14001 certifications]
Tokyo Main Office ☎+81-3-5524-3661~3 FAX+81-3-5524-3665
Hokkaido Sales Office ☎+81-11-806-1786 FAX+81-11-806-1792
Chubu Sales Office ☎+81-59-377-4719 FAX+81-59-377-4721
Tokai Sales Office ☎+81-54-202-1585 FAX+81-54-202-1588
Hokuriku Sales Office ☎+81-76-420-2881 FAX+81-76-491-5201
Kansai Sales Office ☎+81-6-6203-9707 FAX+81-6-6203-2209
Chugoku Sales Office ☎+81-82-535-1710 FAX+81-82-535-1713
Kyushu Sales Office ☎+81-92-687-5267 FAX+81-92-687-5268
Catalog
General valves 10K /20K/150lbBall valves 10K /20K/150lb/300lb
GOURD BRAND
Stainless Steel Valves
Hシリーズ
10KタイプSシリーズ
10KタイプSシリーズ
20KタイプSシリーズ
150
lbタイプミニボールバルブ
ボールバルブ
Hシリーズ
▶Standard type
UB 1 N
UB
UBT
Symbol
Stainless steel mini ball valveLever handle
Stainless steel mini ball valveT-handle
Type
SymbolNo symbol
N
Body materialSCS13ASCS14A
Symbol012
1-stage2-stage
Reduced bore
Full boreBore diameter
Product Codes of General Valves
▶Standard type
U □ ※ F D □Symbol
No symbolM
SymbolSGD
CSCT
SymbolFS
SymbolNo symbol
1020150
SymbolU
Body materialStainless steel
Body materialSCS13ASCS14A
Shape of connectionFlangedScrewed
TypeGate valveGlobe valve
Globe valve with discSwing check valve
Lift check valveStrainer
Shape of connectionH series 10KS series 10KS series 20K
S series 150Ib
50A
50A
※The H-series valves with the “E” symbol are those with Hitachi Valve’s standard specifications. “E” stands for Economical. Example: UESG
Example: H-series
Globe valve with stainless steel 10K disc
Production size
Ball Valve Product Codes
▶Standard type
BU 10 F 1 B□
Symbol1020150300
SymbolBU
TypeBall valve (stainless steel)
Nominal pressure10K20K
150Ib300Ib
SymbolFS
Shape of connectionFlangedScrewed
Symbol1
Bore diameterFull-bore, fire-safe
SymbolNo symbol
MO
Body materialSCS13ASCS14ASCS16A
Production size
Production size½
Edition dated March 2016
Product WarrantyWithin eighteen months of completion inspection or within twelve months of the start of usage, whichever is shortest, Hitachi Valve will repair or replace products or the faulty components of products free of charge in the event of failure under normal usage attributable to inadequate design or manufacturing on the part of Hitachi Valve. However, repairs or replacements will be charged in any of the following cases. Also note that if a separate agreement is in effect, that agreement shall take precedence.
(1) When the product has been used in an incorrect manner which deviates from the catalog or instruction manual;(2) When the product failure is due to careless handling such as jamming with foreign substances or the sticking of excessive water stains;(3) When the product has been disassembled, repaired or altered by a third party other than Hitachi Valve;(4) When the product has been subject to causes beyond the control of Hitachi Valve including natural disasters such as wind or flood damage, earthquakes and electrical storms, fire, pollution (special environments), salt damage, war or acts of terror;(5) When a failure is due to any other factor not deemed to be the responsibility of Hitachi Valve. Damage caused by use, failure, defect, etc. of the product are excluded from the scope of warranty by Hitachi Valve.
EST2016①1
• The product specifications, performance values and prices listed in this catalog are based on general conditions of use and are intended as guidelines for selecting models. Please confirm product specifications and conditions including fluids, temperatures and pressures before selecting a product.• The products listed in this catalog are not designed or manufactured for applications that require a special quality level, such as medical equipment, nuclear generation facilities or airplanes.• The products listed in this catalog are designed to be used within Japan. When exporting the products, the exporter will need to obtain an export license from the Ministry of Economy, Trade and Industry based on the provisions of the Export Control Order under the Foreign Exchange and Foreign Trade Act.• Please note that to improve this catalog, the contents may be changed or revised without prior notice. Please be aware that product catalogs published prior to such revisions are not valid.• The contents of this catalog are copyright of Hitachi Valve, Ltd. Duplication without permission is strictly prohibited. For inquiries, please contact your nearest Hitachi Valve sales office.• When using a product listed in this catalog, please follow the precautions listed in its instruction manual and use it properly.
Agent
http://www.hitachi-valve.co.jp[Obtained ISO9001 & ISO14001 certifications]
Tokyo Main Office ☎+81-3-5524-3661~3 FAX+81-3-5524-3665
Hokkaido Sales Office ☎+81-11-806-1786 FAX+81-11-806-1792
Chubu Sales Office ☎+81-59-377-4719 FAX+81-59-377-4721
Tokai Sales Office ☎+81-54-202-1585 FAX+81-54-202-1588
Hokuriku Sales Office ☎+81-76-420-2881 FAX+81-76-491-5201
Kansai Sales Office ☎+81-6-6203-9707 FAX+81-6-6203-2209
Chugoku Sales Office ☎+81-82-535-1710 FAX+81-82-535-1713
Kyushu Sales Office ☎+81-92-687-5267 FAX+81-92-687-5268
Catalog
General valves 10K /20K/150lbBall valves 10K /20K/150lb/300lb
GOURD BRAND
Stainless Steel Valves
●Use of austenite-based (Cr-Ni-based) stainless steel, which offers superior corrosion resistance and durability.
●A lineup of two series of valves (H-series and S-series) that take into account the lifecycle and serve various applications and purposes.
●Consideration was given to strength balance in the design of these valves. Lost wax casting is employed in the H-series valves to help improve the aesthetic appearance of the overall device.
Features
Pressure-Temperature Rating ASME B 16.34-1996 Pressure-Temperature Range
Production Standard
Series
Series Mini ball valve Ball valve (general-purpose, trunnion type)
Ball valve (general-purpose, for high temperatures, �oating type)
H-series S-series
Test Pressure
Test Pressure
Specifica-tion
standard
Scope of use
Specification standard
Packing
Connection
ThicknessEnd-to-end dimensions
Class
Gasket120℃ or lower150℃ or lower180℃ or lower220℃ or lower300℃ or lower
10KHitachi Valve standard/JIS B 2011
Hitachi Valve standard
JIS B 0203 Taper pipe threads
JIS B 2220 10K-FFReinforced PTFE (conical)
Reinforced PTFE
JIS B 2220 10K-RF JIS B 2220 20K-RF*1
ASME B 16.34(1996)JIS B 2002
10K(Metal seat) 10K(Soft seat) 20K 150lb
ASME B 16.10
ASME B 16.5(1996)150lb-RF
1.4 MPa
1.1 MPa1.0 MPaーー
ーー
1.2 MPa1.0 Mpa
1.28 Mpa
ーー
Expanded graphiteExpanded graphite
3.4 MPa
ーー
3.1 Mpa2.9 Mpa
Reinforced PTFE (conical)Reinforced PTFE
In accordance with ASME
B16.34 (1996)*2
□ H-series Oil is used:1. Usable oil: Heavy oil (A/ B/ C), lubricant oil, turbine oil (♯90 or above), coal tar, and pitch 2. Unusable oil: Crude oil, naphtha, gasoline, kerosene, light oil, turbine oil (♯80 or lower), and heat-transfer oil □ S-series Gasket and packing materials of a 10K/150lb valve will be replaced (with expanded graphite) if the valve is to be used at temperatures greater than 180℃.
Valve body pressure resistance
Valve seat leakage
Valve body pressure resistance
Valve seat leakage
Water pressure
Water pressure
Air pressure
Water pressure
Water pressure
Air pressure
0.59 Mpa1.54 Mpa2.10 Mpa 5.10 Mpa
3.74 Mpa2.93 Mpa2.09 MPa
Note: The water pressure test of the check valve to check for seat leakage shall be conducted by applying the specified pressure and then reducing the pressure to one-third.
*1 Excludes the thickness of the �ange (t). (125A or higher)*2 For details, see “Pressure-temperature ratings ASME B 16.34 (1996).”
*1 The special PTFE (FT seat) combines the excellent properties of PTFE and PFA.*2 The special PTFE (P seat) consists of multiple PTFE monomers, including a carbon-based reinforcing material, and can be used for �uids
at temperatures of up to 300℃.*3 Special customization is available for the conditions of use.
End-to-end dimensionsThickness
Connection
PackingSeat
Retainer O-ring
Caution: 1.Usable: Heavy oil (A/ B/ C), lubricant oil, turbine oil (♯90 or higher), coat tar, and pitch
2.Unusable: Crude oil, naphtha, gasoline, kerosene, turbine oil (#80 or lower), and heat-transfer oil
Scope of use
Reinforced PTFE PTFE PTFEReinforced PTFE Reinforced PTFE PTFESpecial PTFE (FT seat *1: general-purpose, P seat*2: for high temperatures)
ーー ー ー ー ー FKM*3
JIS B 0203 Taper pipe threads
Hitachi Valve standard
Hitachi Valve standard JIS B 2002 JIS B 2002ASME B 16.10 ASME B 16.10
600 Type 800 Type 10K 20K 150lb 300lb 10K 150lb
ASME B 16.34(1996)
JIS B 222010K-RF
JIS 222020K-RF
ASME B 16-5(1996)150lb-RF
ASME B 16-5(1996)300lb-RF
JIS B 222010K-RF
ASME B 16-5(1996)150lb-RF
See “Mini ball valve,” “Ball valve (floating),” and “Ball valve (trunnion)” in the section “Pressure-Temperature Range” on page 3.
0.59 MPaー
6.3 MPa 8.3 MPa 2.10 MPa1.54 MPa
5.10 MPa3.74 MPa
2.85 MPa2.09 MPa
5.88 MPa4.31 MPa
2.10 MPa1.54 MPa
2.85 MPa2.09 MPa
● H-series
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
1.4
1.11.0
0-29 120 150 180
● S-series 20K
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
3.43.12.92.62.32.0
0-29 120 220 300 350 400 425
● Mini ball valve
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
5.49
4.12
0-29 40 50 200
UB0N, UB1N
● Ball valve (trunnion)
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
1.90
1.591.40
0-29 38 93 120 149 170
150lb
10K 1.41 1.371.32
● Ball valve (floating)
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
4.00
3.40
1.90
1.401.00 0
-29 40 72 93 120 149 181 200 250
300lb
20K
150lb
10K1.27
1.35
185
● S-series 10K
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
1.41.281.2
1.0
0-29 120 180 220 300
● Ball valve (for high temperatures)
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
3.92
3.40
1.90
1.40
1.00
0-29 38 93 120 149 163 204 260 300
297
3.20
1.591.411.311.171.03
1.20
Class
Operating temperatureー29~38℃
93℃149℃204℃260℃316℃343℃371℃399℃
150lbCF8
(SCS13A)1.90 MPa 1.59 MPa 1.41 MPa 1.31 MPa 1.17 MPa 0.97 MPa 0.86 MPa 0.76 MPa 0.66 MPa
CF8M(SCS14A)1.90 MPa 1.62 MPa 1.48 MPa 1.34 MPa 1.17 MPa 0.97 MPa 0.86 MPa 0.76 MPa 0.66 MPa
UB2, UB2N, UBT2, UBT2NUB2, UB2N, UBT2, UBT2N
300lb
20K
150lb
10K
GOURD BRAND Stainless Steel Valves
[With options]Metal seat: Change of packing and gasket
[Standard specifications]Metal seatSoft seat
3
●Use of austenite-based (Cr-Ni-based) stainless steel, which offers superior corrosion resistance and durability.
●A lineup of two series of valves (H-series and S-series) that take into account the lifecycle and serve various applications and purposes.
●Consideration was given to strength balance in the design of these valves. Lost wax casting is employed in the H-series valves to help improve the aesthetic appearance of the overall device.
Features
Pressure-Temperature Rating ASME B 16.34-1996 Pressure-Temperature Range
Production Standard
Series
Series Mini ball valve Ball valve (general-purpose, trunnion type)
Ball valve (general-purpose, for high temperatures, �oating type)
H-series S-series
Test Pressure
Test Pressure
Specifica-tion
standard
Scope of use
Specification standard
Packing
Connection
ThicknessEnd-to-end dimensions
Class
Gasket120℃ or lower150℃ or lower180℃ or lower220℃ or lower300℃ or lower
10KHitachi Valve standard/JIS B 2011
Hitachi Valve standard
JIS B 0203 Taper pipe threads
JIS B 2220 10K-FFReinforced PTFE (conical)
Reinforced PTFE
JIS B 2220 10K-RF JIS B 2220 20K-RF*1
ASME B 16.34(1996)JIS B 2002
10K(Metal seat) 10K(Soft seat) 20K 150lb
ASME B 16.10
ASME B 16.5(1996)150lb-RF
1.4 MPa
1.1 MPa1.0 MPaーー
ーー
1.2 MPa1.0 Mpa
1.28 Mpa
ーー
Expanded graphiteExpanded graphite
3.4 MPa
ーー
3.1 Mpa2.9 Mpa
Reinforced PTFE (conical)Reinforced PTFE
In accordance with ASME
B16.34 (1996)*2
□ H-series Oil is used:1. Usable oil: Heavy oil (A/ B/ C), lubricant oil, turbine oil (♯90 or above), coal tar, and pitch 2. Unusable oil: Crude oil, naphtha, gasoline, kerosene, light oil, turbine oil (♯80 or lower), and heat-transfer oil □ S-series Gasket and packing materials of a 10K/150lb valve will be replaced (with expanded graphite) if the valve is to be used at temperatures greater than 180℃.
Valve body pressure resistance
Valve seat leakage
Valve body pressure resistance
Valve seat leakage
Water pressure
Water pressure
Air pressure
Water pressure
Water pressure
Air pressure
0.59 Mpa1.54 Mpa2.10 Mpa 5.10 Mpa
3.74 Mpa2.93 Mpa2.09 MPa
Note: The water pressure test of the check valve to check for seat leakage shall be conducted by applying the specified pressure and then reducing the pressure to one-third.
*1 Excludes the thickness of the �ange (t). (125A or higher)*2 For details, see “Pressure-temperature ratings ASME B 16.34 (1996).”
*1 The special PTFE (FT seat) combines the excellent properties of PTFE and PFA.*2 The special PTFE (P seat) consists of multiple PTFE monomers, including a carbon-based reinforcing material, and can be used for �uids
at temperatures of up to 300℃.*3 Special customization is available for the conditions of use.
End-to-end dimensionsThickness
Connection
PackingSeat
Retainer O-ring
Caution: 1.Usable: Heavy oil (A/ B/ C), lubricant oil, turbine oil (♯90 or higher), coat tar, and pitch
2.Unusable: Crude oil, naphtha, gasoline, kerosene, turbine oil (#80 or lower), and heat-transfer oil
Scope of use
Reinforced PTFE PTFE PTFEReinforced PTFE Reinforced PTFE PTFESpecial PTFE (FT seat *1: general-purpose, P seat*2: for high temperatures)
ーー ー ー ー ー FKM*3
JIS B 0203 Taper pipe threads
Hitachi Valve standard
Hitachi Valve standard JIS B 2002 JIS B 2002ASME B 16.10 ASME B 16.10
600 Type 800 Type 10K 20K 150lb 300lb 10K 150lb
ASME B 16.34(1996)
JIS B 222010K-RF
JIS 222020K-RF
ASME B 16-5(1996)150lb-RF
ASME B 16-5(1996)300lb-RF
JIS B 222010K-RF
ASME B 16-5(1996)150lb-RF
See “Mini ball valve,” “Ball valve (floating),” and “Ball valve (trunnion)” in the section “Pressure-Temperature Range” on page 3.
0.59 MPaー
6.3 MPa 8.3 MPa 2.10 MPa1.54 MPa
5.10 MPa3.74 MPa
2.85 MPa2.09 MPa
5.88 MPa4.31 MPa
2.10 MPa1.54 MPa
2.85 MPa2.09 MPa
● H-series
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
1.4
1.11.0
0-29 120 150 180
● S-series 20K
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
3.43.12.92.62.32.0
0-29 120 220 300 350 400 425
● Mini ball valve
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
5.49
4.12
0-29 40 50 200
UB0N, UB1N
● Ball valve (trunnion)
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
1.90
1.591.40
0-29 38 93 120 149 170
150lb
10K 1.41 1.371.32
● Ball valve (floating)
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
4.00
3.40
1.90
1.401.00 0
-29 40 72 93 120 149 181 200 250
300lb
20K
150lb
10K1.27
1.35
185
● S-series 10K
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
1.41.281.2
1.0
0-29 120 180 220 300
● Ball valve (for high temperatures)
Fluid temperature (℃)
Pre
ssur
e (M
Pa)
3.92
3.40
1.90
1.40
1.00
0-29 38 93 120 149 163 204 260 300
297
3.20
1.591.411.311.171.03
1.20
Class
Operating temperatureー29~38℃
93℃149℃204℃260℃316℃343℃371℃399℃
150lbCF8
(SCS13A)1.90 MPa 1.59 MPa 1.41 MPa 1.31 MPa 1.17 MPa 0.97 MPa 0.86 MPa 0.76 MPa 0.66 MPa
CF8M(SCS14A)1.90 MPa 1.62 MPa 1.48 MPa 1.34 MPa 1.17 MPa 0.97 MPa 0.86 MPa 0.76 MPa 0.66 MPa
UB2, UB2N, UBT2, UBT2NUB2, UB2N, UBT2, UBT2N
300lb
20K
150lb
10K
GOURD BRAND Stainless Steel Valves
[With options]Metal seat: Change of packing and gasket
[Standard specifications]Metal seatSoft seat
2
D
D
L
L
HH
D
L
H
USG/USGM Screwed Globe valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
UESG Screwed Globe valve Short end-to-end dimension
Product Code
UEFG Flanged Globe valve Short end-to-end dimension
Product Code
Product Name
SCS13A
SCS13A
SUS304
SUS304
Reinforced PTFE
Reinforced PTFE
ADC
Conical
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Product Name Remarks
SCS13A
SCS13A
SUS304
SUS304
Reinforced PTFE
Reinforced PTFE
ADC
Conical
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Product NameMaterial
USGMUSGRemarks
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
SUS304
SUS304
SCS14A
SCS14A
SUS316
SUS316
Reinforced PTFE
Reinforced PTFE
FCMB270
Conical
DLNominal(A)
Unit: mm
DLNominal(B)
⅜½¾11¼1½22½3
55658090105120140180200
606080100100100100180180
105105115135150170190235260Unit: mm
DLNominal(B)
¼⅜½¾11¼1½2
44485260728090100
6060606080100100100
105105105105124135150170
10152025324050
738595108120135155
60606080100100100
105105105124135150170
Unit: mm
RemarksMaterial
Material
(Reference)H
Fully open
(Reference)H
Fully open
(Reference)H
Fully open
D
L
H
D
L
H
D
L
H
UFD Flanged Globe valve PTFE disc With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
UFG/UFGM Flanged Globe valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
USD Screwed Globe valve PTFE disc With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
Product Name Material Remarks
SCS13A
SCS13A
SUS304
Reinforced PTFE
SUS304
Reinforced PTFE
Reinforced PTFE
ADC
Conical
Body
Cover
Stem
Disc seat
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
SUS304
Reinforced PTFE
SUS304
Reinforced PTFE
Reinforced PTFE
FCMB270/ADC
Conical
Body
Cover
Stem
Disc seat
Disc
Packing
Gasket
Handle
Product NameMaterial
UFGMUFGRemarks
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
SUS304
SUS304
SCS14A
SCS14A
SUS316
SUS316
Reinforced PTFE
Reinforced PTFE
FCMB270/ADC
Conical
DLNominal(B)
DLNominal(A)
Unit: mm
DLNominal(A)101520253240506580
858595110130150180210240
606080100100100100180180
105105115135150170190235260Unit: mm
101520253240506580
858595110130150180210240
606080100100100100180180
105105115135150170190235260
⅜½¾11¼1½2
55658090105120140
606080100100100100
105105115135150170190
Unit: mm
Product Name RemarksMaterial
(Reference)H
Fully open
(Reference)H
Fully open
(Reference)H
Fully open
5
H-series 10K typeH
-series 10K typ
e
D
D
L
L
HH
D
L
H
USG/USGM Screwed Globe valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
UESG Screwed Globe valve Short end-to-end dimension
Product Code
UEFG Flanged Globe valve Short end-to-end dimension
Product Code
Product Name
SCS13A
SCS13A
SUS304
SUS304
Reinforced PTFE
Reinforced PTFE
ADC
Conical
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Product Name Remarks
SCS13A
SCS13A
SUS304
SUS304
Reinforced PTFE
Reinforced PTFE
ADC
Conical
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Product NameMaterial
USGMUSGRemarks
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
SUS304
SUS304
SCS14A
SCS14A
SUS316
SUS316
Reinforced PTFE
Reinforced PTFE
FCMB270
Conical
DLNominal(A)
Unit: mm
DLNominal(B)
⅜½¾11¼1½22½3
55658090105120140180200
606080100100100100180180
105105115135150170190235260Unit: mm
DLNominal(B)
¼⅜½¾11¼1½2
44485260728090100
6060606080100100100
105105105105124135150170
10152025324050
738595108120135155
60606080100100100
105105105124135150170
Unit: mm
RemarksMaterial
Material
(Reference)H
Fully open
(Reference)H
Fully open
(Reference)H
Fully open
4
H-series 10K type
D
L
H
D
L
H
D
L
H
UFD Flanged Globe valve PTFE disc With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
UFG/UFGM Flanged Globe valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
USD Screwed Globe valve PTFE disc With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
Product Name Material Remarks
SCS13A
SCS13A
SUS304
Reinforced PTFE
SUS304
Reinforced PTFE
Reinforced PTFE
ADC
Conical
Body
Cover
Stem
Disc seat
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
SUS304
Reinforced PTFE
SUS304
Reinforced PTFE
Reinforced PTFE
FCMB270/ADC
Conical
Body
Cover
Stem
Disc seat
Disc
Packing
Gasket
Handle
Product NameMaterial
UFGMUFGRemarks
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
SUS304
SUS304
SCS14A
SCS14A
SUS316
SUS316
Reinforced PTFE
Reinforced PTFE
FCMB270/ADC
Conical
DLNominal(B)
DLNominal(A)
Unit: mm
DLNominal(A)101520253240506580
858595110130150180210240
606080100100100100180180
105105115135150170190235260Unit: mm
101520253240506580
858595110130150180210240
606080100100100100180180
105105115135150170190235260
⅜½¾11¼1½2
55658090105120140
606080100100100100
105105115135150170190
Unit: mm
Product Name RemarksMaterial
(Reference)H
Fully open
(Reference)H
Fully open
(Reference)H
Fully open
H-series 10K
type
D
L
HD
L
H
D
L
H
USS/USSM Screwed Gate valveProduct Code
UFS Flanged Gate valveProduct Code
Product NameMaterial
Remarks
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
SUS304
SCS13A
SCS14A
SCS14A
SUS316
SCS14A
Reinforced PTFE
Reinforced PTFE
FCMB270/ADC
Conical
DLNominal(A)
Unit: mm
DLNominal(B)
½¾11¼1½22½3
545865747887115130
60608080100100140180
95100110125145165215245
1520253240506580
8595100110125140170190
60608080100100140180
98103113129150170215245
Unit: mm
Product Name Remarks
SCS13A
SCS13A
SUS304
SUS304
Reinforced PTFE
Reinforced PTFE
FCMB270/ADC
Conical
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Material
USSMUSS
(Reference)H
Fully open
(Reference)H
Fully open
Reinforced PTFE
Reinforced PTFE
* 2½, 3B: Compliant with the end-to-end dimensions of screwed globe valves required by JIS B 2011
L
H
L
H
L
H
USC Screwed Lift check valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
USCS/USCSM Screwed Swing check valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
UFCS/UFCSM Flanged Swing check valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
Product NameMaterial
Remarks
Body
Cover
Disc
Gasket
SCS13A
SCS13A
SCS13A
SCS14A
SCS14A
SCS14A
Product NameMaterial
UFCSMUFCSRemarks
Remarks
Body
Cover
Disc
Gasket
SCS13A
SCS13A
SCS13A
SCS14A
SCS14A
SCS14A
Product Name Material
Body
Cover
Disc
Gasket
SCS13A
SCS13A
SUS304
Reinforced PTFE
HLNominal(A)
Unit: mm
HLNominal(B)
⅜½¾11¼1½2
55658090105120140
50505565758090
Unit: mm
HLNominal(B)
½¾11¼1½22½3
658090105120140180200
50556070758095105
1520253240506580
8595110130150180210240
52576270758095105
Unit: mmUSCSMUSCS
7
H-series 10K
type
H-series 10K type
D
L
HD
L
H
D
L
H
USS/USSM Screwed Gate valveProduct Code
UFS Flanged Gate valveProduct Code
Product NameMaterial
Remarks
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
SUS304
SCS13A
SCS14A
SCS14A
SUS316
SCS14A
Reinforced PTFE
Reinforced PTFE
FCMB270/ADC
Conical
DLNominal(A)
Unit: mm
DLNominal(B)
½¾11¼1½22½3
545865747887115130
60608080100100140180
95100110125145165215245
1520253240506580
8595100110125140170190
60608080100100140180
98103113129150170215245
Unit: mm
Product Name Remarks
SCS13A
SCS13A
SUS304
SUS304
Reinforced PTFE
Reinforced PTFE
FCMB270/ADC
Conical
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Material
USSMUSS
(Reference)H
Fully open
(Reference)H
Fully open
6
H-series 10K type
Reinforced PTFE
Reinforced PTFE
* 2½, 3B: Compliant with the end-to-end dimensions of screwed globe valves required by JIS B 2011
L
H
L
H
L
H
USC Screwed Lift check valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
USCS/USCSM Screwed Swing check valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
UFCS/UFCSM Flanged Swing check valve With JIS-compliant end-to-end dimensions(JIS B 2011)
Product Code
Product NameMaterial
Remarks
Body
Cover
Disc
Gasket
SCS13A
SCS13A
SCS13A
SCS14A
SCS14A
SCS14A
Product NameMaterial
UFCSMUFCSRemarks
Remarks
Body
Cover
Disc
Gasket
SCS13A
SCS13A
SCS13A
SCS14A
SCS14A
SCS14A
Product Name Material
Body
Cover
Disc
Gasket
SCS13A
SCS13A
SUS304
Reinforced PTFE
HLNominal(A)
Unit: mm
HLNominal(B)
⅜½¾11¼1½2
55658090105120140
50505565758090
Unit: mm
HLNominal(B)
½¾11¼1½22½3
658090105120140180200
50556070758095105
1520253240506580
8595110130150180210240
52576270758095105
Unit: mmUSCSMUSCS
H-series 10K
type
L
H
L
H
H1
H1
UST Screwed StrainerProduct Code
UFT Flanged StrainerProduct Code
Product Name Material Remarks
Product Name Material Remarks
SCS13A
SCS13A
SUS304
Reinforced PTFE
Body
Cover
Screen
Gasket
SCS13A
SCS13A
SUS304
Reinforced PTFE
Body
Cover
Screen
Gasket
LNominal(A)
Unit: mm
H1LNominal(B)
(Reference)H
(Reference)
H1(Reference)
H(Reference)
¼⅜½¾11¼1½22½3
657085100115135150180220250
45455565758595115140155
60607896110125141176213239
10152025324050
110120130150170190220
455565758595115
607896110125141176
Unit: mm
L
H
L
H
H1
H1
UST Screwed StrainerProduct Code
UFT Flanged StrainerProduct Code
Product Name Material Remarks
Product Name Material Remarks
SCS13A
SCS13A
SUS304
Reinforced PTFE
Body
Cover
Screen
Gasket
SCS13A
SCS13A
SUS304
Reinforced PTFE
Body
Cover
Screen
Gasket
LNominal(A)
Unit: mm
H1LNominal(B)
(Reference)H
(Reference)
H1(Reference)
H(Reference)
¼⅜½¾11¼1½22½3
657085100115135150180220250
45455565758595115140155
60607896110125141176213239
10152025324050
110120130150170190220
455565758595115
607896110125141176
Unit: mm
8
H-series 10K type
H-series 10K
type
D
L
H
D
L
H
U10FG/U10FGM Flanged Globe valveProduct Code
U10FD/U10FDM Flanged Globe valve with discProduct Code
U10FGMU10FG
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Body
Cover
Stem
Disc
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
ASTM A351-CF8
SCS14A
SCS14A
ASTM A276-316
ASTM A276-316
ASTM A351-CF8M
Reinforced PTFE
Reinforced PTFE
ASTM A536
80A or lower
100A or higher
Conical
U10FDMU10FD
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
ASTM A351-CF8
SCS14A
SCS14A
ASTM A276-316
ASTM A276-316
ASTM A351-CF8M
Reinforced PTFE
Reinforced PTFE
Reinforced PTFE
ASTM A536
80A or lower
100A or higher
Conical
DLNominal(A)
Unit: mm
DLNominal(A)1520253240506580100125150200
108117127140165203216241292356406495
100100100150150150200250300400400450
171174197227231243292338388478491634
1520253240506580100125150200
108117127140165203216241292356406495
100100100150150150200250300400400450
171174197229231246331379416479495650
Unit: mm
Product NameMaterial
Remarks
Product NameMaterial
Remarks
(Reference)H
Fully open
(Reference)H
Fully open
L
H
D
D
L L
H
H
U10FS/U10FSM Flanged Gate valveProduct Code
U10FCS/U10FCSM Flanged Swing check valveProduct Code
Product NameU10FSMU10FS
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
ASTM A276-304
ASTM A351-CF8
SCS14A
SCS14A
ASTM A276-316
ASTM A351-CF8M
Reinforced PTFE
Reinforced PTFE
ASTM A536
40A or lower: Solid disc
Conical
U10FCSMU10FCS
Body
Cover
Disc
Gasket
Plug
SCS13A
SCS13A
ASTM A351-CF8
ASTM A276-304
SCS14A
SCS14A
ASTM A351-CF8M
ASTM A276-316
Reinforced PTFE
LNominal(A)
Unit: mm
DLNominal(A)
H(Reference)
1520253240506580100125150200250300350400
108117127140165178190203229254267292330356381406
100100150150150150200200300300300350350400450600
2062202603083083374034535446507409441145133214821689
40506580100125150200250300
165203216241292330356495622698
122142148161187261287316393428
Unit: mm
MaterialRemarks
Product NameMaterial
Remarks
(Reference)H
Fully open
11
S-series 10K TypeS
-series 10K Typ
e
D
L
H
D
L
H
U10FG/U10FGM Flanged Globe valveProduct Code
U10FD/U10FDM Flanged Globe valve with discProduct Code
U10FGMU10FG
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Body
Cover
Stem
Disc
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
ASTM A351-CF8
SCS14A
SCS14A
ASTM A276-316
ASTM A276-316
ASTM A351-CF8M
Reinforced PTFE
Reinforced PTFE
ASTM A536
80A or lower
100A or higher
Conical
U10FDMU10FD
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
ASTM A351-CF8
SCS14A
SCS14A
ASTM A276-316
ASTM A276-316
ASTM A351-CF8M
Reinforced PTFE
Reinforced PTFE
Reinforced PTFE
ASTM A536
80A or lower
100A or higher
Conical
DLNominal(A)
Unit: mm
DLNominal(A)1520253240506580100125150200
108117127140165203216241292356406495
100100100150150150200250300400400450
171174197227231243292338388478491634
1520253240506580100125150200
108117127140165203216241292356406495
100100100150150150200250300400400450
171174197229231246331379416479495650
Unit: mm
Product NameMaterial
Remarks
Product NameMaterial
Remarks
(Reference)H
Fully open
(Reference)H
Fully open
10
S-series 10K Type
L
H
D
D
L L
H
H
U10FS/U10FSM Flanged Gate valveProduct Code
U10FCS/U10FCSM Flanged Swing check valveProduct Code
Product NameU10FSMU10FS
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
ASTM A276-304
ASTM A351-CF8
SCS14A
SCS14A
ASTM A276-316
ASTM A351-CF8M
Reinforced PTFE
Reinforced PTFE
ASTM A536
40A or lower: Solid disc
Conical
U10FCSMU10FCS
Body
Cover
Disc
Gasket
Plug
SCS13A
SCS13A
ASTM A351-CF8
ASTM A276-304
SCS14A
SCS14A
ASTM A351-CF8M
ASTM A276-316
Reinforced PTFE
LNominal(A)
Unit: mm
DLNominal(A)
H(Reference)
1520253240506580100125150200250300350400
108117127140165178190203229254267292330356381406
100100150150150150200200300300300350350400450600
2062202603083083374034535446507409441145133214821689
40506580100125150200250300
165203216241292330356495622698
122142148161187261287316393428
Unit: mm
MaterialRemarks
Product NameMaterial
Remarks
(Reference)H
Fully open
S-series 10K
Type
Reinforced PTFE
D
L
H
L
H
U10FC/U10FCM Flanged Lift check valveProduct Code
U10FGC/U10FGCM Flanged Screwed stop check valveProduct Code
DLNominal
(A)
Unit: mm
HLNominal
(A)
1520253240
108117127140165
71747899103
152025324050
108117127140165203
100100100150150150
170173177220225243
Unit: mm
L
H H1
U10FT Flanged StrainerProduct Code
Product Name Remarks
SCS13A
SCS13A
SUS304
Reinforced PTFE
ASTM A276-304
40 mesh
Body
Cover
Screen
Gasket
Plug
H1LNominal
(A)H
6580100125150200250300
290310350400480600730850
190231279310370441510565
269309390460525635757841Unit: mm
Product NameMaterial
Remarks
Body
Cover
Disc
Gasket
SCS13A
SCS13A
ASTM A276-304
SCS14A
SCS14A
ASTM A276-316
U10FCMU10FC
Product NameMaterial
Remarks
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
SCS14A
SCS14A
ASTM A276-316
ASTM A276-316
Reinforced PTFE
Reinforced PTFE
ASTM A47
U10FGCMU10FGC
Material
(Reference)(Reference)
(Reference)
(Reference)H
Fully open
D
L
H
D
L
H
U20FG Flanged Globe ValveProduct Code
Product Name Material Remarks
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
ASTM A351-CF8
Expanded graphite
Expanded graphite seat
ASTM A536
80A or lower
100A or higher
Body
Cover
Stem
Disc
Packing
Gasket
Handle
DLNominal
(A)
15202540506580100125150200
152178203229267292318356400444559
100100150200200250300400350450550
185187230275278316361435507588746Unit: mm
D
L
H
D
L
H
D
L
H
U20FS Flanged Gate valveProduct Code
Product Name
SCS13A
SCS13A
ASTM A276-304
ASTM A351-CF8
Expanded graphite
Expanded graphite seat
ASTM A536
ASTM A47
100A or lower
125A or higher
Body
Cover
Stem
Disc
Packing
Gasket
Handle
DLNominal
(A)
15202540506580100125150200250300
140152165190216241283305381403419457502
100100150200200200300300300350450500600
19922526832536040745554868477897211821374Unit: mm
Material Remarks
(Reference)H
Fully open
(Reference)H
Fully open
13
S-series 20K TypeS
-series 20K Typ
e
Reinforced PTFE
D
L
H
L
H
U10FC/U10FCM Flanged Lift check valveProduct Code
U10FGC/U10FGCM Flanged Screwed stop check valveProduct Code
DLNominal
(A)
Unit: mm
HLNominal
(A)
1520253240
108117127140165
71747899103
152025324050
108117127140165203
100100100150150150
170173177220225243
Unit: mm
L
H H1
U10FT Flanged StrainerProduct Code
Product Name Remarks
SCS13A
SCS13A
SUS304
Reinforced PTFE
ASTM A276-304
40 mesh
Body
Cover
Screen
Gasket
Plug
H1LNominal
(A)H
6580100125150200250300
290310350400480600730850
190231279310370441510565
269309390460525635757841Unit: mm
Product NameMaterial
Remarks
Body
Cover
Disc
Gasket
SCS13A
SCS13A
ASTM A276-304
SCS14A
SCS14A
ASTM A276-316
U10FCMU10FC
Product NameMaterial
Remarks
Body
Cover
Stem
Disc
Packing
Gasket
Handle
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
SCS14A
SCS14A
ASTM A276-316
ASTM A276-316
Reinforced PTFE
Reinforced PTFE
ASTM A47
U10FGCMU10FGC
Material
(Reference)(Reference)
(Reference)
(Reference)H
Fully open
12
S-series 10K Type
D
L
H
D
L
H
U20FG Flanged Globe ValveProduct Code
Product Name Material Remarks
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
ASTM A351-CF8
Expanded graphite
Expanded graphite seat
ASTM A536
80A or lower
100A or higher
Body
Cover
Stem
Disc
Packing
Gasket
Handle
DLNominal
(A)
15202540506580100125150200
152178203229267292318356400444559
100100150200200250300400350450550
185187230275278316361435507588746Unit: mm
D
L
H
D
L
H
D
L
H
U20FS Flanged Gate valveProduct Code
Product Name
SCS13A
SCS13A
ASTM A276-304
ASTM A351-CF8
Expanded graphite
Expanded graphite seat
ASTM A536
ASTM A47
100A or lower
125A or higher
Body
Cover
Stem
Disc
Packing
Gasket
Handle
DLNominal
(A)
15202540506580100125150200250300
140152165190216241283305381403419457502
100100150200200200300300300350450500600
19922526832536040745554868477897211821374Unit: mm
Material Remarks
(Reference)H
Fully open
(Reference)H
Fully open
S-series 10K
Type
LL
H
H
U20FCS Flanged Swing check valveProduct Code
Product Name
SCS13A
SCS13A
ASTM A351-CF8
Graphite seat
ASTM A276-304
ASTM A193-B8
100A or lower
125A or higher
Body
Cover
Disc
Gasket
Plug
LNominal
(A)
40506580100125150200250300
241267292318356400444533622711
124.5145157169197305339408448503Unit: mm
L
H
U20FC Flanged Lift check valveProduct Code
SCS13A
SCS13A
ASTM A276-304
Expanded graphite seat
Body
Cover
Disc
Gasket
LNominal
(A)
15202540
152178203229
767892112Unit: mm
Material Remarks
Product Name Material Remarks
(Reference)H
Fully open
(Reference)H
Fully open
D
L
H
U150FG Flanged Globe ValveProduct Code
DLNominal(B)
½¾11½22½34568
108117127165203216241292356406495
100100100150150200250300400400450
171174197231243292338388478491634Unit: mm
D
L
H
U150FS Flanged Gate valveProduct Code
DLNominal(B)
½¾11½22½345681012
108117127165178190203229254267292330356
100100150150150200200300300300350350400
19622026030833740345354465074094411451332Unit: mm
Product Name Remarks
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
ASTM A351-CF8
Reinforced PTFE
Reinforced PTFE
ASTM A536
100A or lower
125A or higher
Conical
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Product Name
SCS13A
SCS13A
ASTM A276-304
ASTM A351-CF8
Reinforced PTFE
Reinforced PTFE
ASTM A536
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Material Remarks
Material
1½B and lower:Solid disc
Conical
(Reference)H
Fully open
(Reference)H
Fully open
15
S-series 150lb TypeS
-series 150lb typ
e
LL
H
H
U20FCS Flanged Swing check valveProduct Code
Product Name
SCS13A
SCS13A
ASTM A351-CF8
Graphite seat
ASTM A276-304
ASTM A193-B8
100A or lower
125A or higher
Body
Cover
Disc
Gasket
Plug
LNominal
(A)
40506580100125150200250300
241267292318356400444533622711
124.5145157169197305339408448503Unit: mm
L
H
U20FC Flanged Lift check valveProduct Code
SCS13A
SCS13A
ASTM A276-304
Expanded graphite seat
Body
Cover
Disc
Gasket
LNominal
(A)
15202540
152178203229
767892112Unit: mm
Material Remarks
Product Name Material Remarks
(Reference)H
Fully open
(Reference)H
Fully open
14
D
L
H
U150FG Flanged Globe ValveProduct Code
DLNominal(B)
½¾11½22½34568
108117127165203216241292356406495
100100100150150200250300400400450
171174197231243292338388478491634Unit: mm
D
L
H
U150FS Flanged Gate valveProduct Code
DLNominal(B)
½¾11½22½345681012
108117127165178190203229254267292330356
100100150150150200200300300300350350400
19622026030833740345354465074094411451332Unit: mm
Product Name Remarks
SCS13A
SCS13A
ASTM A276-304
ASTM A276-304
ASTM A351-CF8
Reinforced PTFE
Reinforced PTFE
ASTM A536
100A or lower
125A or higher
Conical
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Product Name
SCS13A
SCS13A
ASTM A276-304
ASTM A351-CF8
Reinforced PTFE
Reinforced PTFE
ASTM A536
Body
Cover
Stem
Disc
Packing
Gasket
Handle
Material Remarks
Material
1½B and lower:Solid disc
Conical
(Reference)H
Fully open
(Reference)H
Fully open
S-series 20K Type
S-series 20K
Type
L
H
U150FCS Flanged Swing check valveProduct Code
L
H
U150FC Flanged Lift check valveProduct Code
LNominal(B)
½¾11½
108117127165
717478103Unit: mm
LNominal(B)1½22½34568
165203216241292330356495
122142148161187261287316Unit: mm
H
H
Product Name
SCS13A
SCS13A
ASTM A351-CF8
Reinforced PTFE
ASTM A276-304
Body
Cover
Disc
Gasket
Plug
Material
Product Name
Body
Cover
Disc
Gasket
SCS13A
SCS13A
ASTM A276-304
Reinforced PTFE
Remarks
Material Remarks
(Reference)
(Reference)
W
L
H
UB2 600 model screwed Mini ball valve 2-stage reduced bore
Product Code
SCS13A
SCS14A
SCS13A
SUS316
SUS304
Reinforced PTFE
Reinforced PTFE
SUS304
Diameter: 1B or lower
Diameter: 1 1/4B or higher
Diameter: 3/4B or lower
Diameter: 1B or higher
PVC coating
Body
Ball
Stem
Seat ring
Packing
Handle
W HLNominal(B)
¼⅜½¾11¼1½2
40.54656.563708188107
58708585100100125125
2829374049546268
Unit: mm
W
L
H
UB2N 600 model screwed Mini ball valve 2-stage reduced bore
Product Code
SCS14A
SCS14A
SUS316
Reinforced PTFE
Reinforced PTFE
SUS304 PVC coating
Body
Ball
Stem
Seat ring
Packing
Handle
W HLNominal(B)
¼⅜½¾11¼1½2
40.54656.563708188107
58708585100100125125
2829374049546268
Unit: mm
W
L
H
UB1N 800 model screwed Mini ball valve 1-stage reduced bore
Product Code
SCS14A
SCS14A
SUS316
Reinforced PTFE
PTFE
SUS304 PVC coating
Body
Ball
Stem
Seat ring
Packing
Handle
W HLNominal(B)
¼⅜½¾11¼1½2
59595966.57792101122
103103103103109145145180
4949495463788293
Unit: mm
(Reference)
(Reference)
(Reference)
Product Name Material Remarks
Product Name Material Remarks
Product Name Material Remarks
17
Mini ball typeM
ini ball valve
L
H
U150FCS Flanged Swing check valveProduct Code
L
H
U150FC Flanged Lift check valveProduct Code
LNominal(B)
½¾11½
108117127165
717478103Unit: mm
LNominal(B)1½22½34568
165203216241292330356495
122142148161187261287316Unit: mm
H
H
Product Name
SCS13A
SCS13A
ASTM A351-CF8
Reinforced PTFE
ASTM A276-304
Body
Cover
Disc
Gasket
Plug
Material
Product Name
Body
Cover
Disc
Gasket
SCS13A
SCS13A
ASTM A276-304
Reinforced PTFE
Remarks
Material Remarks
(Reference)
(Reference)
16
W
L
H
UB2 600 model screwed Mini ball valve 2-stage reduced bore
Product Code
SCS13A
SCS14A
SCS13A
SUS316
SUS304
Reinforced PTFE
Reinforced PTFE
SUS304
Diameter: 1B or lower
Diameter: 1 1/4B or higher
Diameter: 3/4B or lower
Diameter: 1B or higher
PVC coating
Body
Ball
Stem
Seat ring
Packing
Handle
W HLNominal(B)
¼⅜½¾11¼1½2
40.54656.563708188107
58708585100100125125
2829374049546268
Unit: mm
W
L
H
UB2N 600 model screwed Mini ball valve 2-stage reduced bore
Product Code
SCS14A
SCS14A
SUS316
Reinforced PTFE
Reinforced PTFE
SUS304 PVC coating
Body
Ball
Stem
Seat ring
Packing
Handle
W HLNominal(B)
¼⅜½¾11¼1½2
40.54656.563708188107
58708585100100125125
2829374049546268
Unit: mm
W
L
H
UB1N 800 model screwed Mini ball valve 1-stage reduced bore
Product Code
SCS14A
SCS14A
SUS316
Reinforced PTFE
PTFE
SUS304 PVC coating
Body
Ball
Stem
Seat ring
Packing
Handle
W HLNominal(B)
¼⅜½¾11¼1½2
59595966.57792101122
103103103103109145145180
4949495463788293
Unit: mm
(Reference)
(Reference)
(Reference)
Product Name Material Remarks
Product Name Material Remarks
Product Name Material Remarks
S-series 150lb type
S-series 150lb
type
BU10F1B/BU10F1BM/BU10F1BO Flanged Ball valves General-purpose Product Code
BU10F1BMBU10F1B BU10F1B0*
SCS13A
SCS13A
SUS304
SCS14A
SCS14A
SUS316
Special PTFE
PTFE
FCMB340
SCS13A+SGP
SCS16A
SCS16A
SUS316L
FT Seat
100A or lower
125A or higher
Body
Ball
Stem
Seat ring
Packing
Handle
1520253240506580100125150200
108117127140165178190203229356394457
1201201501502202202204004007501,0001,000
798294100112120134163178255285345Unit: mm
W HLNominal(A)
* Contact us for details about the product size.
BU10F1P/BU10F1PM/BU10F1PO Flanged Ball valves For high temperatures
Product Code
BU10F1BMBU10F1B BU10F1B0*
SCS13A
SCS13A
SUS304
SCS14A
SCS14A
SUS316
Special PTFE
Expanded graphite
FCMB340
SCS13A+SGP
SCS16A
SCS16A
SUS316L
P seat
100A or lower
125A or higher
Body
Ball
Stem
Seat ring
Packing
Handle
1520253240506580100125150200
108117127140165178190203229356394457
1201201501502202202204004007501,0001,000
798294100112120134163178255285345Unit: mm
W HLNominal(A)
* Contact us for details about the product size.
W
L
H
W
L
H
W
L
H
BU10S1B Ball valves General-purpose
Product Code
W HLNominal(B)
⅜½¾11¼1½2
62658090110120140
120120120150150220220
76798294100112120Unit: mm
10K screwed type
(Reference)
(Reference)
(Reference)
SCS13A
SCS13A
SUS304
Special PTFE
PTFE
FCMB340
FT Seat
Body
Ball
Stem
Seat ring
Packing
Handle
Product Name Material Remarks
ProductName
ProductName
MaterialRemarks
MaterialRemarks
19
Ball Valves 10K typeB
all valves
W
L
H
UBT2 600 model screwed Mini ball valveProduct Code
W HLNominal(B)
¼⅜½¾1
40.54656.56370
4545505070
2628333641
Unit: mm
W
L
H
UBT2N 600 model screwed Mini ball valveProduct Code
W HLNominal(B)
¼⅜½¾1
40.54656.56370
4545505070
2628333641
Unit: mm
W
L
H
UB0N 800 model screwed Mini ball valve Full bore
Product Code
W HLNominal(B)
¼⅜½¾11¼1½2
5555687486100109130
103103103109145145180180
4949546378829399
Unit: mm
(Reference)
(Reference)
(Reference)
SCS13A
SCS14A
SUS316
SUS304
Reinforced PTFE
Reinforced PTFE
ADC12
Diameter: 3/4B or lower
Bore diameter : 1B
Body
Ball
Stem
Seat ring
Packing
Handle
SCS14A
SCS14A
SUS316
Reinforced PTFE
PTFE
SUS304 PVC coating
Body
Ball
Stem
Seat ring
Packing
Handle
Product Name Material Remarks
Product Name Material Remarks
SCS14A
SCS14A
SUS316
Reinforced PTFE
Reinforced PTFE
ADC12
Body
Ball
Stem
Seat ring
Packing
Handle
Product Name Material Remarks
18
BU10F1B/BU10F1BM/BU10F1BO Flanged Ball valves General-purpose Product Code
BU10F1BMBU10F1B BU10F1B0*
SCS13A
SCS13A
SUS304
SCS14A
SCS14A
SUS316
Special PTFE
PTFE
FCMB340
SCS13A+SGP
SCS16A
SCS16A
SUS316L
FT Seat
100A or lower
125A or higher
Body
Ball
Stem
Seat ring
Packing
Handle
1520253240506580100125150200
108117127140165178190203229356394457
1201201501502202202204004007501,0001,000
798294100112120134163178255285345Unit: mm
W HLNominal(A)
* Contact us for details about the product size.
BU10F1P/BU10F1PM/BU10F1PO Flanged Ball valves For high temperatures
Product Code
BU10F1BMBU10F1B BU10F1B0*
SCS13A
SCS13A
SUS304
SCS14A
SCS14A
SUS316
Special PTFE
Expanded graphite
FCMB340
SCS13A+SGP
SCS16A
SCS16A
SUS316L
P seat
100A or lower
125A or higher
Body
Ball
Stem
Seat ring
Packing
Handle
1520253240506580100125150200
108117127140165178190203229356394457
1201201501502202202204004007501,0001,000
798294100112120134163178255285345Unit: mm
W HLNominal(A)
* Contact us for details about the product size.
W
L
H
W
L
H
W
L
H
BU10S1B Ball valves General-purpose
Product Code
W HLNominal(B)
⅜½¾11¼1½2
62658090110120140
120120120150150220220
76798294100112120Unit: mm
10K screwed type
(Reference)
(Reference)
(Reference)
SCS13A
SCS13A
SUS304
Special PTFE
PTFE
FCMB340
FT Seat
Body
Ball
Stem
Seat ring
Packing
Handle
Product Name Material Remarks
ProductName
ProductName
MaterialRemarks
MaterialRemarks
Mini ball valve
Mini b
all valve
W
L
H
UBT2 600 model screwed Mini ball valveProduct Code
W HLNominal(B)
¼⅜½¾1
40.54656.56370
4545505070
2628333641
Unit: mm
W
L
H
UBT2N 600 model screwed Mini ball valveProduct Code
W HLNominal(B)
¼⅜½¾1
40.54656.56370
4545505070
2628333641
Unit: mm
W
L
H
UB0N 800 model screwed Mini ball valve Full bore
Product Code
W HLNominal(B)
¼⅜½¾11¼1½2
5555687486100109130
103103103109145145180180
4949546378829399
Unit: mm
(Reference)
(Reference)
(Reference)
SCS13A
SCS14A
SUS316
SUS304
Reinforced PTFE
Reinforced PTFE
ADC12
Diameter: 3/4B or lower
Bore diameter : 1B
Body
Ball
Stem
Seat ring
Packing
Handle
SCS14A
SCS14A
SUS316
Reinforced PTFE
PTFE
SUS304 PVC coating
Body
Ball
Stem
Seat ring
Packing
Handle
Product Name Material Remarks
Product Name Material Remarks
SCS14A
SCS14A
SUS316
Reinforced PTFE
Reinforced PTFE
ADC12
Body
Ball
Stem
Seat ring
Packing
Handle
Product Name Material Remarks
W
L L1
H
W
L L1
H
φD
L
H2
H1
BU10F0TL2/BU10F0TL4 Flanged Three-way ball valves General-purpose L-port (2/4 seats)
Product Code
BU10F0TT4 Flanged Three-way ball valves General-purpose T-Port (4 seats)
Product Code
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SUS304 or SCS13A
SUS304
Special PTFE
PTFE
FCMB340
FT Seat
BU10F0TL2 BU10F0TL4
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SUS304 or SCS13A
SUS304
Special PTFE
PTFE
FCMB340
FT Seat
Unit: mm
2540506580100
160180200240260330
150220220220400400
102129140149196210
W
8090100120130165
L1 HLNominal(A)
Unit: mm
2540506580100
160180200240260330
150220220220400400
102129140149196210
W
8090100120130165
L1 HLNominal(A)
BU10F1B/BU10F1BM Flanged Ball valves General-purpose Trunnion type
Product Code
Product NameBU10F1BMBU10F1B
1-stage body
2-stage body
Ball
Upper stem
Lower stem
Seat ring
Seat retainer
Seat retainer O-ring*
Backup ring
Gland packing
Gasket
SCS13A
SCS13A
SCS13A
SUS304
SUS304
SCS14A
SCS14A
SCS14A
SUS316
SUS316
PTFE
SCS13A SCS14A
FKM
SUS316L
PTFE conical packing
Reinforced PTFE
Unit: mm
250300
533610
483.5548.5
305.5358.5
H1 H2
355355
DLNominal(A)
* Special customization is available for the conditions of use.
(Reference)
(Reference)
MaterialRemarks
Product NameMaterial
Remarks
Product Name Material Remarks
W
L
H
BU20F1B/BU20F1BM Flanged Ball valves General-purpose
Product Code
BU20F1B
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
PTFE
FCMB340
SCS13A+SGP
BU20F1BM
SCS14A
SCS14A
SUS316
FT Seat
80A or lower
100A or higher
1520253240506580100150200
140152165178190216241283305403502
12012015015022022022040075010001450
79829298112120130163220285345Unit: mm
W HLNominal(A)
W
L
H
Product Code
1520253240506580100150200
140152165178190216241283305403502
12012015015022022022040075010001450
79829298112120130163220285345Unit: mm
W HLNominal(A)
BU20F1P/BU20F1PM/BU20F1PO Flanged Ball valves For high temperatures
(Reference)
(Reference)
MaterialRemarksProduct Name
BU20F1B
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
Expanded graphite
FCMB340
SCS13A+SGP
BU20F1BM
SCS14A
SCS14A
SUS316
P Seat
80A or lower
100A or higher
MaterialRemarksProduct Name
21
Ball Valves 20K TypeB
all valves
W
L L1
H
W
L L1
H
φD
L
H2
H1
BU10F0TL2/BU10F0TL4 Flanged Three-way ball valves General-purpose L-port (2/4 seats)
Product Code
BU10F0TT4 Flanged Three-way ball valves General-purpose T-Port (4 seats)
Product Code
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SUS304 or SCS13A
SUS304
Special PTFE
PTFE
FCMB340
FT Seat
BU10F0TL2 BU10F0TL4
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SUS304 or SCS13A
SUS304
Special PTFE
PTFE
FCMB340
FT Seat
Unit: mm
2540506580100
160180200240260330
150220220220400400
102129140149196210
W
8090100120130165
L1 HLNominal(A)
Unit: mm
2540506580100
160180200240260330
150220220220400400
102129140149196210
W
8090100120130165
L1 HLNominal(A)
BU10F1B/BU10F1BM Flanged Ball valves General-purpose Trunnion type
Product Code
Product NameBU10F1BMBU10F1B
1-stage body
2-stage body
Ball
Upper stem
Lower stem
Seat ring
Seat retainer
Seat retainer O-ring*
Backup ring
Gland packing
Gasket
SCS13A
SCS13A
SCS13A
SUS304
SUS304
SCS14A
SCS14A
SCS14A
SUS316
SUS316
PTFE
SCS13A SCS14A
FKM
SUS316L
PTFE conical packing
Reinforced PTFE
Unit: mm
250300
533610
483.5548.5
305.5358.5
H1 H2
355355
DLNominal(A)
* Special customization is available for the conditions of use.
(Reference)
(Reference)
MaterialRemarks
Product NameMaterial
Remarks
Product Name Material Remarks
20
W
L
H
BU20F1B/BU20F1BM Flanged Ball valves General-purpose
Product Code
BU20F1B
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
PTFE
FCMB340
SCS13A+SGP
BU20F1BM
SCS14A
SCS14A
SUS316
FT Seat
80A or lower
100A or higher
1520253240506580100150200
140152165178190216241283305403502
12012015015022022022040075010001450
79829298112120130163220285345Unit: mm
W HLNominal(A)
W
L
H
Product Code
1520253240506580100150200
140152165178190216241283305403502
12012015015022022022040075010001450
79829298112120130163220285345Unit: mm
W HLNominal(A)
BU20F1P/BU20F1PM/BU20F1PO Flanged Ball valves For high temperatures
(Reference)
(Reference)
MaterialRemarksProduct Name
BU20F1B
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
Expanded graphite
FCMB340
SCS13A+SGP
BU20F1BM
SCS14A
SCS14A
SUS316
P Seat
80A or lower
100A or higher
MaterialRemarksProduct Name
Ball Valves Three-Way Ball Valves 10K type
Ball valves
W
L
H
W
L
H
BU300F1P Flanged Ball valves For high temperatures
Product Code
Unit: mm
½¾11½22½3468
140152165190216241283305403502
12012015022022022040075010001450
798292112120130163220285345
W HLNominal(B)
BU300F1B Flanged Ball valves General-purpose
Product Code
Unit: mm
½¾11½22½3468
140152165190216241283305403502
12012015022022022040075010001450
798292112120130163220285345
W HLNominal(B)
(Reference)
(Reference)
Product Name
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
PTFE
FCMB340
SCS13A+SGA
FT Seat
3B or lower
4B or higher
Material Remarks
Product Name
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
Expanded graphite
FCMB340
SCS13A+SGP
P Seat
3B or lower
4B or higher
Material Remarks
23
Ball Valve 300lb Type
φD
L
H2
H1
W
L
H
BU150F1B Flanged Ball valves General-purpose
Product Code
Product Name
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
PTFE
FCMB340
SCS13A+SGA
FT Seat
4B or lower
5B or higher
Unit: mm
½¾11¼1½22½34568
108117127140165178190203229356394457
1201201501502202202204004007501,0001,000
798294100112120134163178255285345
W HLNominal(B)
BU150F1B/BU150F1BM Flanged Ball valves General-purpose Trunnion type
Product Code
1012
533610
483.5548.5
305.5358.5
Unit: mm
H1 H2
355355
DLNominal(B)
(Reference)
Material Remarks
Product NameBU150F1BMBU150F1B
1-stage body
2-stage body
Ball
Upper stem
Lower stem
Seat ring
Seat retainer
Seat retainer O-ring*
Backup ring
Gland packing
Gasket
SCS13A
SCS13A
SCS13A
SUS304
SUS304
SCS14A
SCS14A
SCS14A
SUS316
SUS316
PTFE
SCS13A SCS14A
FKM
SUS316L
PTFE conical packing
Reinforced PTFE
* Special customization is available for the conditions of use.
MaterialRemarks B
all valves
W
L
H
W
L
H
BU300F1P Flanged Ball valves For high temperatures
Product Code
Unit: mm
½¾11½22½3468
140152165190216241283305403502
12012015022022022040075010001450
798292112120130163220285345
W HLNominal(B)
BU300F1B Flanged Ball valves General-purpose
Product Code
Unit: mm
½¾11½22½3468
140152165190216241283305403502
12012015022022022040075010001450
798292112120130163220285345
W HLNominal(B)
(Reference)
(Reference)
Product Name
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
PTFE
FCMB340
SCS13A+SGA
FT Seat
3B or lower
4B or higher
Material Remarks
Product Name
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
Expanded graphite
FCMB340
SCS13A+SGP
P Seat
3B or lower
4B or higher
Material Remarks
φD
L
H2
H1
W
L
H
BU150F1B Flanged Ball valves General-purpose
Product Code
Product Name
Body
Ball
Stem
Seat ring
Packing
Handle
SCS13A
SCS13A
SUS304
Special PTFE
PTFE
FCMB340
SCS13A+SGA
FT Seat
4B or lower
5B or higher
Unit: mm
½¾11¼1½22½34568
108117127140165178190203229356394457
1201201501502202202204004007501,0001,000
798294100112120134163178255285345
W HLNominal(B)
BU150F1B/BU150F1BM Flanged Ball valves General-purpose Trunnion type
Product Code
1012
533610
483.5548.5
305.5358.5
Unit: mm
H1 H2
355355
DLNominal(B)
(Reference)
Material Remarks
Product NameBU150F1BMBU150F1B
1-stage body
2-stage body
Ball
Upper stem
Lower stem
Seat ring
Seat retainer
Seat retainer O-ring*
Backup ring
Gland packing
Gasket
SCS13A
SCS13A
SCS13A
SUS304
SUS304
SCS14A
SCS14A
SCS14A
SUS316
SUS316
PTFE
SCS13A SCS14A
FKM
SUS316L
PTFE conical packing
Reinforced PTFE
* Special customization is available for the conditions of use.
MaterialRemarks
22
Ball Valves 150lb Type
Ball valves