Goodyear 3V 5V 8V v Belts

P O W E R T R A N S M I S S I O N P R O D U C T S V - B E L T

54

H Y- T ® W E D G E

A N A R R O W E R C R O S S S E C T I O N

& S T R O N G E R C O N S T R U C T I O N

R E D U C E S D R I V E C O S T S

The savings start in the basic wedge or narrow design of the HY-TWedge belt. It has a narrower cross section than standard V-belts soit distributes stresses more uniformly to deliver more consistent,more reliable power transmission.

A narrower cross section means the belts are smaller and weigh less.Smaller belts allow for the use of smaller and lighter sheaves, resulting in a more efficient drive.

The savings continue through the higher horsepower capacity p rovided by Go o d year HY-T V-belt construction. Vy t a c o rd tension members, provide strength and dimensional stability.Higher horsepower capacity is also provided through a tough engi-neered rubber compound cushion, adding to belt strength.

HY-T Wedge is so strong that small sheave diameters aren’t a problem. It’s often possible to achieve a required horsepower withfewer HY-T Wedge belts than with standard V-belts, reducingsheave size, sheave costs, and belt costs even more.

Since less power is required to run the smaller, lighter drives, morepower gets to the load. Therefore, you may be able to downsizedrive motors and/or increase drive efficiency for even more savings.

M A T C H M A K E R ® P E R F O R M A N C E

H Y-T Wedge belts eliminate mismatch problems as eachMatchmaker belt in a single length code is identical in size and performance to every other HY-T Wedge belt in that size, no matter when or where it was produced.

Part No: 5V14005V .62" Top Width – Narrow Profile1400 140.0" Nominal Outside Length

Envelope Uncogged Construction Shown

W E D G E O R E N V E L O P E

C O N S T R U C T I O N S P R O V I D E O P T I M U M

P E R F O R M A N C E

HY-T Wedge belts are available in a raw-edge construction withcogs for increased flexibility and heat dissipation or envelope construction for drives where pulsation, shock loads, high tension,and long centers are involved.

HY-T Wedge Cogged belts are high-horsepower belt constructionsthat are identified with a 3VX and 5VX prefix and are available inlengths up to 200". The cogged construction provides the highflexibility required for short center distances. The cogs also providea larger surface area to dissipate heat and prolong belt life.Im p roved material pro p e rties and advanced construction technology results in an average horsepower increase of 30% overstandard “Classical” V-belt and wedge belts.

HY-T Wedge Envelope belts are identified with a 3V, 5V, or 8Vprefix and are recommended for drives where pulsation, shockloads, high tension, and long centers are involved. It features acontinuous V-section that is protected by a wide angle, syntheticfabric impregnated with high-quality Goodyear engineered rubbercompound. This unique envelope achieves the high strength HY-T Wedge belts need to withstand high loading forces. It alsoprovides the torsional rigidity required in long center drives delivering the traction needed for accurate tracking and precisionperformance.

A P P L I C AT I O N SNarrow profile belts for compact, high horsepowerdrives and high shock loading on short centers andsmall diameters. For designing compact, heavy-dutydrives where space limitation is a factor.

K E Y F E AT U R E S & B E N E F I T S• Narrow profile provides savings through

efficiency.• Greater horsepower than the classical belt.• Strong Vytacord (polyester) tensile members.• High-grade engineered rubber.• Oil, heat, ozone, and abrasion resistant.• Available in raw-edge construction with cogs or

envelope construction.• Matchmaker to eliminate mismatch.• Static conductive.

Goodyear PTP 52-71 VBelt 4/12/06 5:37 PM Page 54


55

2 0 0 6

H Y- T ® W E D G E

3VX250 25.03VX265 26.53VX280 28.03VX300 30.03VX315 31.53VX335 33.53VX355 35.5

3VX375 37.53VX400 40.03VX425 42.53VX450 45.03VX475 47.53VX500 50.03VX530 53.0

3VX560 56.03VX600 60.03VX630 63.03VX670 67.03VX710 71.03VX750 75.03VX800 80.0

3VX850 85.03VX900 90.03VX950 95.03VX1000 100.03VX1060 106.03VX1120 112.03VX1180 118.0

3VX1250 125.03VX1320 132.03VX1400 140.03VX1500 150.0

C O G G E D S I Z E SPart

NumberEffective

Length (in)

5VX450 45.05VX470 47.05VX490 49.05VX500 50.05VX510 51.05VX530 53.05VX540 54.05VX550 55.05VX560 56.05VX570 57.05VX580 58.0




5VX1250 125.05VX1320 132.05VX1400 140.05VX1500 150.05VX1600 160.05VX1700 170.05VX1800 180.05VX1900 190.05VX2000 200.0

3V250 25.03V265 26.53V280 28.03V300 30.03V315 31.53V335 33.53V355 35.5

3V375 37.53V400 40.03V425 42.53V450 45.03V475 47.53V500 50.03V530 53.0

3V560 56.03V600 60.03V630 63.03V670 67.03V710 71.03V750 75.03V800 80.0

3V850 85.03V900 90.03V950 95.03V1000 100.03V1060 106.03V1120 112.03V1180 118.0

3V1250 125.03V1320 132.03V1400 140.0

5V500 50.05V560 56.05V630 63.05V670 67.05V710 71.05V750 75.05V800 80.0

5V850 85.05V900 90.05V950 95.05V1000 100.05V1060 106.05V1120 112.05V1180 118.0

5V1250 125.05V1320 132.05V1400 140.05V1500 150.05V1600 160.05V1700 170.05V1800 180.0

5V1900 190.05V2000 200.05V2120 212.05V2240 224.05V2360 236.05V2500 250.05V2650 265.0

5V2800 280.05V3000 300.05V3150 315.05V3350 335.05V3550 355.0

8V1000 100.08V1060 106.08V1120 112.08V1180 118.08V1250 125.08V1320 132.0

8V1400 140.08V1500 150.08V1600 160.08V1700 170.08V1800 180.08V1900 190.0

8V2000 200.08V2120 212.08V2240 224.08V2360 236.08V2500 250.08V2650 265.0

8V2800 280.08V3000 300.08V3150 315.08V3350 335.08V3550 355.08V3750 375.0

8V4000 400.08V4250 425.08V4500 450.08V4750 475.08V5000 500.08V5600 560.0

PartNumber

EffectiveLength (in)

PartNumber


PartNumber


PartNumber


N O N C O G G E D S I Z E S

3 V X 5 V X 8 V X

PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber


PartNumber




56

N A R R O W ( U LT R A - V ) S H E AV E S

Diameter (in)

2.20 JA2.35 JA2.50 JA2.65 JA2.80 JA3.00 JA, SH3.15 JA, SH3.35 JA, SH

3.65 SH4.12 SH4.50 SH, SDS4.75 SH, SDS, SK5.00 SH, SDS, SK5.30 SH, SDS, SK5.60 SH, SDS, SK6.00 SH, SDS, SK

6.50 SH, SDS, SK6.90 SH, SDS, SK8.00 SDS, SK, SF

10.60 SDS, SK, SF, E14.00 SK, SF, E19.00 SK, SF, E25.00 SF, E, F33.50 SF, E, F

Diameter (in)

4.40 SH, SDS, SD4.65 SDS, SD4.90 SDS, SD5.20 SDS, SD5.50 SDS, SD5.90 SDS, SD, SK6.30 SK6.70 SK, SF7.10 SK, SF7.50 SK, SF8.00 SK, SF, E

8.50 SK, SF, E9.00 SK, SF, E, F9.25 SK, SF, E, F9.75 SK, SF, E, F

10.30 SK, SF, E, F10.90 SK, SF, E, F11.30 SK, SF, E, F11.80 SK, SF, E, F12.50 SF, E, F, J13.20 SF, E, F, J14.20 SF, E, F, J

15.00 SF, E, F, J16.00 SF, E, F, J18.70 SF, E, F, J21.20 SF, E, F, J23.60 E, F, J, M28.00 E, F, J, M31.50 F, J, M37.50 F, J, M50.00 F, J, M

Diameter (in)

12.50 F, J, M13.20 F, J, M14.00 F, J, M15.00 F, J, M16.00 F, J, M17.00 F, J, M18.00 F, J, M

19.00 F, J, M, N20.00 J, M, N21.20 J, M, N22.40 J, M, N24.80 M, N30.00 M, N, P35.50 M, N, P

40.00 M, N, P44.50 M, N, P53.00 M, N, P, W63.00 P, W71.00 P, W

3 V Available Sizes

5 V Available Sizes

8 V Available Sizes


Documents

Goodyear 3V 5V 8V v Belts