23
Goodson Tools and Supplies for Engine Builders Keeper-Eeze Tools

Goodson Tools and Supplies for Engine Builders

Embed Size (px)

DESCRIPTION

Goodson Tools and Supplies for Engine Builders. Keeper-Eeze Tools. Keeper- Eeze Tools. KE-6802. KE-6940. KE-6902. KE-6901. KE-6804. KE-6903. Keeper-Eeze Demonstrated on Honda CRF-250R. - PowerPoint PPT Presentation

Citation preview

GoodsonTools and Supplies for Engine Builders

Keeper-Eeze Tools

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 2

Keeper- Eeze Tools

KE-6802

KE-6901

KE-6903

KE-6940

KE-6902

KE-6804

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 3

Keeper-Eeze Demonstrated on Honda CRF-250R

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 4

Valve Support Selection: A Shot-Bag or Chamber Plug must be used to hold up the valves

while removing the valve locks.• The Shot-Bags will

conform to the combustion chamber. They should not protrude too far from the deck surface when installed. Choose from the different size bags for the correct fit. Multiple bags can be used for large chambers.

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 5

Sleeve Selection

• Determine the correct protective guide Sleeve. Pick the Sleeve that fits closest to the bucket bore dia. And the spring/ retainer assembly. Some engines require the valve spring clearance relief to be used as a guide.

ID always fits tool

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 6

Installing Sleeve

• Fits in around spring & retainer

• Install the correct size sleeve over the spring & retainer assembly. The sleeve will maintain the proper fit for removal and assembly of the spring & retainer.

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 7

• This shows the proper sleeve installed around the spring and retainer.

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 8

T-Handle Assembly• Hold the T-handle portion

of the Keeper-Eeze tool with the tube down between the fingers. Remove any Loader Modules from the tool by gently pulling on the plunger at the end to overcome the magnetic force. Retract the Adjuster by loosening the knob on the side and pulling it back.

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 9

• Insert the Remover attachment (Order No. KE-6803) into the end of the Keeper-Eeze tool. Push it in with a twisting action until it is fully seated.

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 10

Push tool down

• Insert “T” Handle in sleeve installed in step 3. Hold tool down with one hand and firmly strike the T-Handle with palm of the opposite hand. This will release keepers. (Do not strike Keeper-Eeze with a hammer)

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 11

Lock and retainer held by remover

• Pull the tool away from the cylinder head. The valve locks and retainer will be held safe by the Remover. Store the components for later assembly.

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 12

• Remove valve lock & Retainer off of the magnet with your hand

• Remove Spring

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 13

• Remove valve

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 14

To Reassemble • Install valve spring • Install retainer on top of

valve spring

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 15

• Spring Assembly in place

• Install Sleeve

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 16

• Insert the installation attachment into the T-handle

• Now the installation attachment is ready to have the correct keeper loader installed into the end of the installation attachment

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 17

Assembly

• Insert the correct size loader module with the correct loader that matches the valve stem diameter until it seats up against the magnet

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 18

Fully Assembled

• Loosen adjustment knob on side of T-handle. Then adjust loader module pin to approximately the same depth the keepers are located down on the valve stem.

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 19

• Place the valve locks (keepers) on the Loader Plunger

• Keepers are in position to be installed in the retainer and valve stem

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 20

• Now insert into the top of the sleeve and push into the retainer

• Same as removal, push down on T-handle Until an audible “click” is heard and felt in the handle and snaps in place and then remove T-handle

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 21

• Remove outer sleeve and you have a finished product

Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com 22

Keeper- Eeze Tools

KE-6802

KE-6901

KE-6903

KE-6940

KE-6902

KE-6804

GoodsonTools and Supplies for Engine Builders

Keeper-Eeze ToolsAny questions on the Keeper-

Eeze please contact usToll Free: 1-800-533-8010

Phone: 507-452-1830Website:

www.goodson.com