Go Faster and Test More!!

This presentation is based on an actual SMH Technologies Case Study that SMH posts on their web site, URL Below.

http://smh-tech.com/support/Case-Studies/Multiple-programming-issue-solved-by-implementing-FRQuattro/

This information is compared to Price, Performance and Specifications of GR228X/TS12X Library Models and ISP Products that are currently available from Uwharrie Test

Solutions.

Flash Runner FR04A08 * 4 Installed in TS12x/GR228x Fixture

Uwharrie Test Solutions ISP Hybrid Program generated from HTS/DTS

Cost to Implement…$7329.00 for hardware,

$3600 for Implementation

Total Cost $11,221.00

Cost to Implement…$1000.00 for 2 HTS. About $980.00 for 2

DTS. About $2500.00 for 1up to Parallel

Conversion. Total Cost $4480.00

Flash Runner FR04A08I’m not sure what it all isexactly, but there is a lot

of it.

Quite Impressive!

Uwharrie Test SolutionsSorry there is not much to dazzle you

with.The picture below represents eight additional twisted pair

wires you need for clock drivers to the TCK lines.

Flash Runner FR04A08 * 4 Installed in TS12x/GR228x Fixture

Uwharrie Test Solutions ISP Hybrid Program generated from HTS/DTS

Total ISP time as stated in Case Study, 60 seconds

Per Panel, estimated cost of operation $1.20

Pin-Test CoverageSorry, Flash Runner doesn’t

do that.

Program/verify 4 in parallel MSP430F5437 13.2 seconds, MSP430FG4618 4.9 seconds, Total time 18.1 Seconds.

Per Panel, Estimated cost of operation $0.362

Pin-Test Coverage All pins with probe access have a

vector based stuck-at test.

Your CM, after he builds a million pieces with Flash Runner

Things that your CM does with the savings

Flash Runner FR04A08 * 4 Installed in TS12x/GR228x Fixture

Uwharrie Test Solutions ISP Hybrid Program generated from HTS/DTS

Only available on TS12X/GR228X testers. Savings may vary depending on flash size, design for testability, programming interface, tPROG and other factors.