Upload
neeraj-shrivastava
View
227
Download
1
Embed Size (px)
Citation preview
Good Manufacturing Practices
Neeraj ShrivastavaQuality Assurance Team
05/02/2023 2
The Early Beginning1. 1900s house-
calls 2. Home
remedies, ointments and “miracle elixirs”
3. Entertainment and music
4. No regulations until 1902
Fig. 1. Animation of ancient medicine show
05/02/2023 3
Public Involvement• 1905 - The Jungle by
Upton Sinclair.• Exposure of unsanitary
conditions in meat packing plants.
• Public awareness and involvement.
• Pure Food and Drug Act.
• False labeling became illegal.
Fig. 2. The Jungle by Upton Sinclair
Fig. 3. 1906 Meat processing plant
05/02/2023 4
1941 Initiation of GMP Sulfathiaziole Tablets• Contaminated with phenobarbital.• About - 300 people died/injured.• FDA to enforce and revise manufacturing and quality control requirements. Fig. 4 1906 Certificate of Purity signed by
doctor
05/02/2023 5
1941 - GMP is born
• The beginning of modern standards for good manufacturing practices can be traced to an incident that began in December 1940, when the Winthrop Chemical Company of New York put on the market sulfathiazole tablets contaminated with Phenobarbital.
05/02/2023 6
1962 Kefauver-Harris Drug Amendments
Thalidomide Tragedy•Thousands of children born with birth defects due to adverse drug reactions of morning sickness pill taken by mothers.
Fig 5. Kennedy signing the Kefauver –Harris Drug Amendments
05/02/2023 7
Images of Thalidomide tragedy
05/02/2023 8
1976 Medical Device Amendments
•1972 and 1973 -Pacemaker failures reported
•1975 - hearing-Dalkon Shield intrauterine device caused thousands of injuries
Fig.6 President Gerald Ford signs the Medical Device Amendments
05/02/2023 9
1976 Medical Device Amendments
• Class I, II and III medical devices – based on degree of control necessary to be safe and effective.
05/02/2023 10
1980 Infant Formula Act•1978 - major manufacturer of infant formula reformulated two of its soy products•1979 - Infants diagnosed with hypochloremic metabolic alkalosis.
Fig.8 Parody on Infant Formula Act
05/02/2023 11
1980 Infant Formula Act
• Greater regulatory control over the formulation and production of infant formula• Modification of industry’s and FDA’s recall procedures
05/02/2023 12
HistoryFOOD AND DRUGS ACT1. FOOD AND DRUG REGULATIONS
DIVISION 2 : GOOD MANUFACTURING PRACTICES2. 1900’S- ADULTERATED FOOD
FIRST PURITY LAWS ENACTED3. 1930’S- SULFANILIMIDE
DRUGS HAD TO BE PROVEN SAFE4. 1960’S- THALIDOMIDE
DRUGS HAD TO BE PROVEN SAFE AND EFFECTIVE THROUGH CLINICAL TRIALS
05/02/2023 13
GMP Agencies Worldwide Enforcement• In US :- USFDA : United States Food and
Drug Administration.• In UK :- MHRA : Medicines and
HealthcareProducts Regulatory Agency.
• In Australia :- TGA : Therapeutic Good Administration.
• In India :-
FDA : The Ministry of Health, Food and drug Administration.follow Schedule-M Part of Drug & Cosmetic Act 1945.
05/02/2023 14
Introduction to cGMP
05/02/2023 15
cGMP Legal Principles
• Current = dynamic– Standards evolve over time current, to
emphasize that the expectations are dynamic.
• Good practices–Minimal standards–Not “best practices”• Unless “best” is, in fact, current minimal
05/02/2023 16
Objectives GMP Training Acquire basic knowledge of current Good Manufacturing Practices (cGMP).1. Good Manufacturing Practices.2. Contamination.3. General Employee Hygiene.4. Food Handling Practices.
05/02/2023 17
What are GMPs..?GMP is that part of Quality assurance which ensures that the products are consistently manufactured and controlled to the desired Quality standards appropriate for intended use
"GMP" - A set of principles and procedures which, followed by manufacturers for therapeutic goods, helps ensure that the products manufactured the required quality.
05/02/2023 18
Why are cGMPs important?• GOVERNMENT REQUIREMENT.• ENSURE QUALITY PRODUCT.• REDUCE REJECTS, RECALLS.• SATISFIED CUSTOMERS.• MAINTAIN MANUFACTURING CONSISTENCY.• COMPANY IMAGE AND REPUTATION.
05/02/2023 19
Good Manufacturing Practices
DEAL WITH CONTAMINATION:-•BY PEOPLE•BY FOOD MATERIALS•BY PACKAGING MATERIALS•BY HAZARDOUS MATERIALS•BY MISCELLANEOUS MATERIALS
05/02/2023 20
Hygiene
All employees working in direct contact
with food, food contact surfaces and
food packaging must conform to
hygienic practices. This protects against
food contamination by microorganisms
or unwanted material.
05/02/2023 21
Prevent contamination
Careless employee practices can cause product contamination.
The best way to avoid contamination is to prevent it.
05/02/2023 22
Any behavior that could result in food contamination such as eating, use of tobacco, chewing gum or other unhygienic practices, is not allowed in manufacturing & packing areas.
How do we prevent contamination?
05/02/2023 23
Hygiene & Communicable Diseases
• Clothing• Hair• Personal habits• Hand washing• Personal effects
and jewelry.
• Illness and disease • Injuries• Visitors• Training.
05/02/2023 24
Production employees- Bathe daily.- No perfume, aftershave, fragrant creams.- No jewellery.- No false nails or nail polish.- Fingernails should be trimmed short.- Use metal detectable bandages covered
with gloves.- No eating, drinking or chewing gum.
05/02/2023 25
Clothing - Everyone must wear pants and
covered sleeves.- Separate shoes (no open toes or
high heels) are to be worn in the factory.
- Personal belongings and street clothing must be stored in locker rooms.
05/02/2023 26
Illness• Doctor’s certificate on hiring• Inform your supervisor or HR if you
are ill with symptoms that could contaminate ingredients or products.• No medication allowed in factory.• Ensure that a clean bandage covers
any open wounds.
05/02/2023 27
Hand washingAll employees must wash their hands thoroughly:
• When they enter food handling areas• Before starting work.• After handling contaminated materials• After breaks.• After using toilet facilities.
05/02/2023 28
Personnel- Do not leave gloves, masks, etc. lyingaround while on break or at shift end. - Crates, boxes, containers or bucketsmust not be placed directly on thefloor.- Store brooms and dust pans at stations Provided.
05/02/2023 29
Product- Keep hand contact with ingredients to
a minimum.- Check ingredients for expiration dates
to ensure that fresh ingredients are used.
- Cooling product should always be kept covered.
05/02/2023 30
Equipment and containers
- Return tools and attachments to their proper place after use.
- Check product surfaces before starting equipment. Remove any foreign objects or dirt.
- Replace brushes that lose bristles.
GMP Categories•SALES•PREMISES•EQUIPMENT•PERSONNEL•SANITATION•RAW MATERIAL TESTING•MANUFACTURING CONTROL
•QUALITY CONTROL DEPARTMENT•PACKAGING MATERIAL TESTING•FINISHED PRODUCT TESTING•RECORDS•SAMPLES•STABILITY
05/02/2023 32
Sales
•NO DISTRIBUTOR … AND NO IMPORTER SHALL SELL A DRUG UNLESS IT HAS BEEN FABRICATED, PACKAGED/LABELED, TESTED, AND STORED IN ACCORDANCE WITH THE REQUIREMENTS OF THIS DIVISION.
05/02/2023 33
Premises & Equipments
• Permits effective cleaning.• Prevents contamination.• Orderly conditions.• Good state of repair.
05/02/2023 34
LOCATION AND SURROUNDINGS• Environmentally polluted areas and industrial
activities which produce disagreeable or obnoxious odour, fumes, excessive soot, dust, smoke, chemical or biological emissions and pollutants, and which pose a serious threat of contaminating food,
• Areas subject to flooding,• Areas prone to infestations of pests, and
areas where wastes, either solid or liquid, cannot be removed effectively.
05/02/2023 35
Personnel• Appropriate education, training and
experience.• Sufficient number of people• Receive cGMP training–Initial and continuing training as
relevant to job responsibilities.
05/02/2023 36
Sanitation• Sanitation Program to prevent contamination• Cleaning procedures for facilities & equipment• Pest control.• Environmental monitoring.• Documented evidence.• Keep contact surfaces clean and free of
contamination from tools, cords, cleaning utensils, machine parts, lubricants and paper.
05/02/2023 37
Sanitation• Keep everything off the floor and area clean
and floors swept.• Work areas should be cleaned regularly
throughout the shift.• Keep your immediate working area swept or
dust mopped. Wipe or mop up spilled liquids promptly.
• Scrape the floor around the work area after completing a job.
• Leave your work area clean at the end of your shift.
05/02/2023 38
Sanitation• Hygiene
1. Health and eye examinations.2. Report adverse health conditions.3. Clothing requirements• No direct skin contact with product.• Wash hands.• No jewelry or excessive makeup.
4. No smoking, eating, drinking, chewing, or keeping of plants in operations areas.
05/02/2023 39
Raw Material Testing• Each lot or batch of raw material is tested to– confirm the identity of the raw materials.–provide assurance that quality of the drug
in dosage form will not be altered by raw material defects.–assure that raw materials have the
characteristics that will provide the desired quantity or yield in manufacturing process.
05/02/2023 40
RM, PM and Finished Product Testing• Samples of incoming materials are
collected and tested before use.• Approved test methods and
specifications are used.• Results must conform to specifications
for release for use or sale.• Transportation and storage records.
05/02/2023 41
Manufacturing Control• Written procedures are established
and followed.–Master formulae, manufacturing
order and packaging order.• Critical processes are validated.• 2nd person verification of activities.• Quarantine system.• Labelling requirements.
05/02/2023 42
Manufacturing Control
• Recall Programme• Self-Inspection Programme• Ensure compliance with
vendors /contractors.
05/02/2023 43
Manufacturing Control (cont’d)
• Validation: the documented act of demonstrating that any procedure, process, equipment, material, activity, or system will consistently lead to the expected results.–Design Qualification (DQ)– Installation Qualification (IQ)–Operational Qualification (OQ)–Performance Qualification (PQ)
05/02/2023 44
Quality Control Department
• Quality Control Responsibilities–Testing of bulk components prior to
use by production.–Testing of finished product prior to
release for sale.–Stability program (in association with
QA).
05/02/2023 45
Samples and Stability• Samples–Retain samples of each lot of raw
material and finished product for specified period of time.
• Stability– Establish the length of time in
which the product meets all specifications.–Monitor the drug for this period of
time.
Quality Assurance• Wide-ranging concept – covers all matters that individually or
collectively influence the quality of a product.
• Totality of the arrangements– to ensure that the drug is continuously of
the right quality for the intended use.• Quality Assurance incorporates GMP–and also includes product design and
development, with special focus on process design.
05/02/2023 47
Quality Assurance Department
• Quality Assurance Responsibilities–Ensure cGMP compliance.–Review batch records, labels.–Release product, based on QC test results.–Authorize all master documents and SOPs.–Training, auditing.–Handling customer complaints.–Recall.
05/02/2023 48
Key Quality Terms• CHANGE CONTROL–Written procedure that describes the
action to be taken if a change is proposed to facilities, etc. used in fabrication, packaging, and testing of drugs or any change that may affect quality or support system operation.
05/02/2023 49
Key Quality Terms
• DEVIATION–Planned or unplanned temporary
departure from an approved process, specification or procedure with the potential to impact product quality.
05/02/2023 50
Records• Document all cGMP activities.• Use Good Documentation
Practices (GDP).• Records must be readily
available.• Needed to prove activities
were done.
05/02/2023 51
Good Documentation Practices• Documentation must be:–Permanent (blue ink)–Legible, clear, concise.–Accurate.–Timely.–Consistent.–Complete.
05/02/2023 52
Our GoalsSafety: Product is free of unwanted side effects when used appropriately by patient.Identity: Product exactly matches the labeling and related documents.
Purity: Product is free from contamination.Strength: Product has correct concentration, potency or therapeutic activity of active ingredient.Quality: Product meets all standards, expectations; performs as claimed and product made consistently.
05/02/2023 53
Summary1. PHARMACEUTICAL INDUSTRY IS REGULATED
BY GMP AND IT MUST BE FOLLOWED.2. GMP’S ENSURE DRUG PRODUCTS ARE SAFE,
PURE AND EFFECTIVE. 3. QUALITY SHOULD BE BUILT INTO THE
PRODUCT.4. GMP'S ARE VERY SIMILAR AND ARE REALLY
GOOD COMMON SENSE.5. GOOD PRACTICES COVER ALL ASPECTS OF
MANUFACTURING ACTIVITIES PRIOR TO SUPPLY.
Thank you..