Embed Size (px)
Citation preview
GMMGEAR MEASURING MACHINE
A new generation
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
GMMGEAR MEASURING MACHINE
A new generation
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
Rigidity and long term structural stability are achieved by means of lapped granite guideways with well dimensioned cursors sustained from a special frictionless airbearings configuration and design
-RIGIDITY AND STRUCTURAL STABILITY-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
Rigidity and long term structural stability are achieved by means of lapped granite guideways with well dimensioned cursors sustained from a special frictionless airbearings configuration and design
- 4 AXIS METROLOGY
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-SW MACHINE / OPERATOR INTERFACE
-RIGIDITY AND STRUCTURAL STABILITY-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
A careful dimensioning and dislocation of the moving masses and the pneumatic balancing system of the vertical axis have allowed the realization of a light structure, capable of large dimensional capability of linear and angular movements
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY The linear axis (XYZ) are moved by
means of Special linear motors thrusting along the neutral axis without lateral components of force and dimensioned for a minimum thermal effects.
The range of controlled speed is very large and the linearity of the movements is perfect ; characteristics not easily obteinable when a rotary movement is transformed into a linear one
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
A careful dimensioning and dislocation of the moving masses and the pneumatic balancing system of the vertical axis have allowed the realization of a light structure, capable of large dimensional capability of linear and angular movements
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY The linear axis (XYZ) are moved by
means of Special linear motors thrusting along the neutral axis without lateral components of force and dimensioned for a minimum thermal effects.
The range of controlled speed is very large and the linearity of the movements is perfect ; characteristics not easily obteinable when a rotary movement is transformed into a linear one
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The linear and notary transducers are first class high resolutions devices made of glass protected scales with certified CTE
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
The Probing System is a patented proprietary design of MDM-MECATRONICS based on a special high linearity LVDT capable of 50nm resolution.
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM-PNEUMATIC ACTIVE ISOLATORS
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
The linear and notary transducers are first class high resolutions devices made of glass protected scales with certified CTE
The Probing System is a patented proprietary design of MDM-MECATRONICS based on a special high linearity LVDT capable of 50nm resolution.
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The models GMM70 e GMM110 are based to the ground by means of pneumatic autolevelling supports of first quality willing to warranty maximum insulation from external vibrations and absorb the kinetic energy of moving masses
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
- 4 AXIS METROLOGY
-PNEUMATIC ACTIVE ISOLATORS
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
The models GMM70 e GMM110 are based to the ground by means of pneumatic autolevelling supports of first quality willing to warranty maximum insulation from external vibrations and absorb the kinetic energy of moving masses
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
The 4th axis is an airbearing/ballbearing
composite rotary table, moved by means
of an special high-quality torque motor
over dimensioned configured as
frictionless „Electronic Shaft“ without
mechanical reductions and capable of
a very large dinamic performance
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
The 4th axis is an airbearing/ballbearing
composite rotary table, moved by means
of an special high-quality torque motor
over dimensioned configured as
frictionless „Electronic Shaft“ without
mechanical reductions and capable of
a very large dinamic performance
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
Performance Verification based on a procedureperformed from the MDM-MECATRONICS, that is accredited in the National Calibration System (SIT 082) in compliance to the ISO 17025 with the use of artifacts calibrated from primary National Calibration bodies
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PERFORMANCE VERIFICATION-MEASURED PARTS
Performance Verification based on a procedureperformed from the MDM-MECATRONICS, that is accredited in the National Calibration System (SIT 082) in compliance to the ISO 17025 with the use of artifacts calibrated from primary National Calibration bodies
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-Measurable Cylindrical parallel/helical, internal/external Spur, Worm and Bevel Gears with involute profile
-Profiles of solids of revolution
-3D Metrology and Reverse Engineering
-Statistical Process Control (SPC)
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-Measurable Cylindrical parallel/helical, internal/external Spur, Worm and Bevel Gears with involute profile
-Profiles of solids of revolution
-3D Metrology and Reverse Engineering
-Statistical Process Control (SPC)
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
Metrologic SW is developed, assisted and Licensed to end users from the sister SW Company MDM-Metrosoft
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
Metrologic SW is developed, assisted and Licensed to end users from the sister SW Company MDM-Metrosoft
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
The Windows based SW follows the simple rule WYSIWYG (what you see is what you get). The SW is „User Friendly“ and adds expectise to the operator.
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
The Windows based SW follows the simple rule WYSIWYG (what you see is what you get). The SW is „User Friendly“ and adds expectise to the operator.
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
The measurement results are clearly rapresented with the most popular graphs, with
numerical values and classification always displaied
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
The measurement results are clearly rapresented with the most popular graphs, with
numerical values and classification always displaied
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
Profile and lead test charts with classification compliant to
Norms DIN/ISO/AGMA
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
Profile and lead test charts with classification compliant to
Norms DIN/ISO/AGMA
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
The files of all measurements can be printed, saved,riedited
choosing the display parameters at need
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-PNEUMATIC ACTIVE ISOLATORS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-GMM FAMILY
-SW MACHINE / OPERATOR INTERFACE
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
The files of all measurements can be printed, saved,riedited
choosing the display parameters at need
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-GMM40
-GMM70
-GMM110
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
- 4 AXIS METROLOGY
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
TOPICAL CHARACTERISTICS
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
-PNEUMATIC ACTIVE ISOLATORS
-GMM70
-GMM110
GMM40AVAILABLE MODELS
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
GMM40AVAILABLE MODELS
Measuring Range:
X = 350mm. Y = 240mm. Z = 390mm.
Max Diam. = 400mm.Max.Shaft Length = 700mm
Layout Dimensions:
Heigh: 1840mm. Length: 2680mm. Width: 1160mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
GMM40AVAILABLE MODELS
Measuring Range:
X = 350mm. Y = 240mm. Z = 390mm.
Max Diam. = 400mm.Max.Shaft Length = 700mm
Layout Dimensions:
Heigh: 1840mm. Length: 2680mm. Width: 1160mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
GMM70AVAILABLE MODELS
Measuring Range:
X = 650mm. Y = 390mm. Z = 590mm.
Max Diam. = 700mm.Max.Shaft Length = 1000mm
Layout Dimensions:
Heigh: 2200mm. Length: 3200mm. Width: 1395mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
GMM70AVAILABLE MODELS
Measuring Range:
X = 650mm. Y = 390mm. Z = 590mm.
Max Diam. = 700mm.Max.Shaft Length = 1000mm
Layout Dimensions:
Heigh: 2200mm. Length: 3200mm. Width: 1395mm.
GMM110
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
AVAILABLE MODELS
Measuring Range:
X = 900mm. Y = 600mm. Z = 590mm.
Max Diam. = 1100mm.Max.Shaft Length = 1400mm
Layout Dimensions:
Heigh: 2855mm. Length: 3550mm. Width: 2115mm.
GMM110
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
AVAILABLE MODELS
Measuring Range:
X = 900mm. Y = 600mm. Z = 590mm.
Max Diam. = 1100mm.Max.Shaft Length = 1400mm
Layout Dimensions:
Heigh: 2855mm. Length: 3550mm. Width: 2115mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO) Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com [email protected]
