1
Cromamig 312 GMAW - MIG MAG Stainless Steel Date: 2008-01-22 Revision: 9 Description: Cromamig 312 deposits a 29% Cr / 9% Ni austenitic/ferritic stainless steel weld metal with a ferrite content of about FN 40. The weld metal exhibits excellent tolerance to dilution from dissimilar and difficult-to-weld base materials without hot cracking, together with high strength and very good heat and oxidation resistance. APPLICATIONS: – Difficult-to-weld steels e.g. high carbon hardenable tool, die and spring steels, 13% Mn steels, free-cutting steels, high temperature steels. – Dissimilar joints between stainless and high carbon steels. – Surfacing of metal-to-metal wear areas, hot working tools, furnace components. – Buffer layers prior to hard facing with high chromium carbide deposits. Welding current: DC+ Wire composition, wt.% Min Typical Max C 0,10 0,15 Si 0,30 0,50 0,65 Mn 1,0 1,9 2,5 P 0,020 0,030 S 0,010 0,020 Cr 28,0 30,5 32,0 Ni 8,0 9,2 12,0 Min Typical Max Mo 0,10 0,30 Cu 0,10 0,30 Shielding gas: Acc. to EN 439: M12, Ar, 2% CO2,16-21 l/min M13, Ar + 1-3% O2, 16-21 l/min Ferrite content: FN 40 Corrosion resistance Good resistance to sulphurous gases at high temperature. Good resistance to wet corrosion up to approximately 300°C. Scaling temperature: Approx. 1100°C in air. Chemical composition, wt.% Min Typical Max C 0,10 Si 0,5 Mn 1,8 P 0,02 S 0,01 Cr 30,0 Ni 9,0 Min Typical Max Mo 0,10 Mechanical properties Specified Typical Yield strength, Rp0.2%: 450 MPa 600 MPa Tensile Strength, Rm: 660 MPa 750 MPa Elongation, A5 22% 25% Impact energy, CV: 20°C 50 J Classification: EN ISO 14343 G 29 9 AWS A5.9 ER312 Approvals: Product data Diam.mm Product code Dip Current A Dip Voltage V Spray Current A Spray Voltage V 1,0 9808-2010 75-140 18-21 170-200 26-28 1,2 9808-2012 130-160 18-21 175-250 26-28 Elga reserves the right to change specifications without prior notice.

GMAW - MIG MAG Stainless Steel - elgawelding.com - MIG MAG Stainless St… · Cromamig 312 GMAW - MIG MAG Stainless Steel Date: 2008-01-22 Revision: 9 Description: Cromamig 312 deposits

  • Upload
    lyhuong

  • View
    213

  • Download
    0

Embed Size (px)

Citation preview

Page 1: GMAW - MIG MAG Stainless Steel - elgawelding.com - MIG MAG Stainless St… · Cromamig 312 GMAW - MIG MAG Stainless Steel Date: 2008-01-22 Revision: 9 Description: Cromamig 312 deposits

Cromamig 312GMAW - MIG MAGStainless Steel

Date: 2008-01-22 Revision: 9

Description:Cromamig 312 deposits a 29% Cr / 9% Ni austenitic/ferritic stainless steel weld metal with a ferrite content of about FN 40. The weld metal exhibits excellent tolerance to dilution from dissimilar and difficult-to-weld base materials without hot cracking, together with high strength and very good heat and oxidation resistance.

APPLICATIONS:– Difficult-to-weld steels e.g. high carbon hardenable tool, die and spring steels, 13% Mn steels, free-cutting steels, high temperature steels.– Dissimilar joints between stainless and high carbon steels.– Surfacing of metal-to-metal wear areas, hot working tools, furnace components.– Buffer layers prior to hard facing with high chromium carbide deposits.Welding current:DC+Wire composition, wt.%

 Min

TypicalMax

0,100,15

Si0,300,500,65

Mn1,01,92,5

0,0200,030

0,0100,020

Cr28,030,532,0

Ni8,09,212,0

 Min

TypicalMax

Mo 

0,100,30

Cu 

0,100,30

Shielding gas:Acc. to EN 439:M12, Ar, 2% CO2,16-21 l/minM13, Ar + 1-3% O2, 16-21 l/minFerrite content:FN 40Corrosion resistanceGood resistance to sulphurous gases at high temperature. Good resistance to wet corrosion up to approximately 300°C.Scaling temperature:Approx. 1100°C in air.Chemical composition, wt.%

 Min

TypicalMax

0,10 

Si 

0,5 

Mn 

1,8 

0,02 

0,01 

Cr 

30,0 

Ni 

9,0 

 Min

TypicalMax

Mo 

0,10 

Mechanical propertiesSpecified Typical

Yield strength, Rp0.2%: ≥ 450 MPa 600 MPaTensile Strength, Rm: ≥ 660 MPa 750 MPaElongation, A5 ≥ 22% 25%Impact energy, CV: 20°C • 50 J

Classification:EN ISO 14343 G 29 9AWS A5.9 ER312

Approvals:

Product dataDiam.mm Product code Dip Current A Dip Voltage V Spray Current A Spray Voltage V

1,0 9808-2010 75-140 18-21 170-200 26-281,2 9808-2012 130-160 18-21 175-250 26-28

Elga reserves the right to change specifications without prior notice.