Upload
glue-guru
View
239
Download
1
Embed Size (px)
DESCRIPTION
Â
Citation preview
HEADING 1
FILM INDUSTRYPRODUCT GUIDE 2015
ABOUT GLUE GURUGlue Guru is New Zealand’s #1
importer, distributor, wholesaler and
manufacturer of world class adhesives
and industrial products.
We stock a full range of products
from 300ml cartridges right up to
1000L tankers.
Glue Guru Industrial is the New
Zealand and Australian agent for world
renowned brands : CANTAC Canister
Adhesive Technology, QUILOSA
Industrial (E.U) and New Zealand
agents for DAP Incorporated (U.S)
WOODLOK, PROBOND and SINTEX
caulking guns. These brands offer the
best products available in their field
and we are proud to offer these to the
New Zealand market.
We are also New Zealand distributors
for Henkel, the world’s largest adhesive
company.
Glue Guru is an Authorised Industrial
Distributor for 3M as well as other
major international brands Bostik,
Sika, West System and many more.
Glue Guru Industrial, for the best
service, products and latest
innovations in Industrial Adhesives.
GLUE GURU – KEY BRANDS AND AGENCIES
CONTACT
TEL +64 9 444 4878 FAX +64 9 442 5975 E [email protected]
18 Kaimahi Road, Wairau Valley , Auckland 0627
PO Box 102095 NSMC, Auckland 0745
www.glueguru.co.nz
1
CONTENTS
WATER BASED ADHESIVES 3
CONSTRUCTION ADHESIVES 7
MS POLYMER ADHESIVES & SEALANTS 8
POLYURETHANE ADHESIVES 9
CANISTERS & AEROSOLS 10
CONTACT ADHESIVES 13
EPOXIES 15
HOT MELT APPLICATORS 18
HOT MELT STICKS 20
CYANOACRYLATES 22
SPECIALTY ADHESIVES 24
CAULKS 25
FILLERS 26
SOLVENTS 27
SINGLE SIDED TAPES 29
DOUBLE SIDED TAPES 30
RESPIRATORY PROTECTION 31
GLOVES AND COVERALLS 33
CAULKING GUNS 34
ACCESSORIES 36
3
WOODLOK WL 2200 LAMINATING ALIPHATIC PVA SIZE CODE
WL 2200 is a cost effective Aliphatic PVA Wood Glue suitable for general purpose wood to wood applications. Long open time in comparison to other formulations making it ideal for laminating full sheets of MDF, Particleboard or Plywood. Interior use.
Working Time: 15min
Viscosity: 4,000cps
Solids: 36%
Colour: Pale Yellow
Coverage: 5-7m2 per L
Clean up: Warm water while wet
500ml WL 2200 500
5L WL 2200 5
10L WL 2200 10
20kg WL 2200 20
210kg WL 2200 D
WOODLOK WL 2300 PREMIUM ALIPHATIC PVA SIZE CODE
The most versatile Aliphatic Resin within the WOODLOK range. WL 2300 cures to give high strength bonds on softwoods, most hardwoods, particleboard and MDF. Moderate open time and fast setting due to the high solids content. Interior use.
Working Time: 7min
Viscosity: 7,000cps
Solids: 47%
Colour: Pale Yellow
Coverage: 5-6m2 per L
Clean up: Warm water while wet
500ml WL 2300 500
5L WL 2300 5
10L WL 2300 10
20kg WL 2300 20
210kg WL 2300 D
WATER BASED ADHESIVES
WATER BASED ADHESIVES
WOODLOK WL 2400 HARDLINE ALIPHATIC PVA SIZE CODE
WL2400 is a premium grade, sandable Aliphatic Resin. The bonds formed are heat and moisture resistant and the glue line will accept stains and lacquers. Formulated to provide high strength bonds with minimal creep due to the hard drying glue line. Fast wet tack, quick drying and has excellent machining and sanding properties. Interior use.
Working Time: 5min
Viscosity: 8,000cps
Solids: 48%
Colour: Pale Yellow
Coverage: 4-5m2 per L
Clean up: Warm water while wet
500ml WL 2400 500
5L WL 2400 5
10L WL 2400 10
20kg WL 2400 20
210kg WL 2400 D
WOODLOK WL 2500 D3 CROSSLINK PVA SIZE CODE
WL 2500 is a self-crosslinking, water based, PVA adhesive that has a D3 water resistance classification. WL 2500 is suitable for Interior and Exterior Joinery and is excellent on most timbers. Use for finger-joining, edge gluing, veneering and general joinery work. Can be used in cold, hot and radio frequency (RF) presses for an accelerated cure. High heat, solvent and moisture resistance. Clear glue line when cured. Interior/Exterior use.
Working Time: 5min
Viscosity: 4,500cps
Solids: 48%
Colour: White, Clear when dry
Coverage: 6-8m2 per L
Clean up: Warm water while wet
500ml WL 2500 500
5L WL 2500 5
10L WL 2500 10
20kg WL 2500 20
210kg WL 2500 D
WOODLOK WL 2550 D3 CROSSLINK PVA SIZE CODE
WL 2550 is a self-crosslinking, water based, high viscosity PVA adhesive that has a D3 water resistance classification. WL 2550 is suitable for Interior and Exterior Joinery and is excellent on most timbers. Used for applications requiring a high viscosity, low slump and long working time. WL 2550 is suitable for pressing of hollow or solid core doors. Can be used in cold, hot and radio frequency (RF) presses for an accelerated cure. High heat, solvent and moisture resistance. Clear glue line when cured. Interior/Exterior use.
Working Time: 10min
Viscosity: 8,500cps
Solids: 42%
Colour: White, Clear when dry
Coverage: 4-5m2 per L
Clean up: Warm water while wet
500ml WL 2550 500
5L WL 2550 5
10L WL 2550 10
20kg WL 2550 20
210kg WL 2550 D
5WATER BASED ADHESIVES
WOODLOK WL 3150 MELAMINE ADHESIVE SIZE CODE
WL 3150 is a specialised high performance emulsion adhesive formulated for the bonding of difficult synthetic laminated board (Melamine®) to MDF, timber, particleboard and other porous substrates. Cured adhesive is clear and highly flexible. Commonly used for joining panels of Melamine® to MDF in kitchen and cabinet manufacture. Not recommended for Melamine to Melamine. There must be one porous surface to allow the adhesive to dry. Interior use.
Working Time: 12min
Viscosity: 5,500cps
Solids: 55%
Colour: White, Clear when dry
Coverage: 5-7m2 per L
Clean up: Warm water while wet
500ml WL 3150 500
5L WL 3150 5
10L WL 3510 10
20kg WL 3150 20
210kg WL 3510 D
PROBOND E-317 LOW VISCOSITY EVA ADHESIVE SIZE CODE
Low viscosity EVA adhesive for a variety of applications and substrates. Common uses include paper lamination, core winding, textile and fabric lamination and general craft use. Suitable for most paper stocks, cardboard, fabrics, polystyrene, wood etc. Not recommended for high strength wood to wood applications due to its flexible glue line.
Working Time: 7min
Viscosity: 3,500cps
Solids: 33%
Colour: White, Clear when dry
Coverage: 6-8m2 per L
Clean up: Warm water while wet
500ml PRO E-317 500
5L PRO E-317 5
10L PRO E-317 10
20kg PRO E-317 20
210kg PRO E-317 D
PROBOND E-417 PREMIUM MEDIUM VISCOSITY EVA ADHESIVE SIZE CODE
High performance high solids EVA adhesive for a variety of applications and substrates. Common uses include paper lamination, book binding, padding, textile and fabric lamination and general craft use. Suitable for most paper stocks, cardboard, fabrics, polystyrene, wood etc. Not recommended for high strength wood to wood applications due to its flexible glue line.
Working Time: 5min
Viscosity: 5,000cps
Solids: 48%
Colour: White, Clear when dry
Coverage: 4-6m2 per L
Clean up: Warm water while wet
500ml PRO E-417 500
5L PRO E-417 5
10L PRO E-417 10
20kg PRO E-417 20
210kg PRO E-417 D
CONSTRUCTION ADHESIVES & SEALANTS
WATER BASED ADHESIVES
PROBOND E-817 PREMIUM HIGH VISCOSITY EVA ADHESIVE SIZE CODE
High performance high solids EVA adhesive for a variety of applications and substrates. Common uses include paper lamination, book binding, padding, textile and fabric lamination and general craft use. Suitable for most paper stocks, cardboard, fabrics, polystyrene, wood etc. Not recommended for high strength wood to wood applications due to its flexible glue line.
Working Time: 7min
Viscosity: 8,500cps
Solids: 48%
Colour: White, Clear when dry
Coverage: 4-6m2 per L
Clean up: Warm water while wet
5L PRO E-817 5
10L PRO E-817 10
20kg PRO E-817 20
PROBOND CA-1 CEMENT ADDITIVE AND PLASTER MODIFIER SIZE CODE
Premium high solids, highly concentrated synthetic resin cement additive and plaster modifier.
Excellent as an additive and adhesion promoting agent in concrete and plaster to cement board, polystyrene, wood concrete and other materials. The plaster is toughened, flexural and final compressive strength is dramatically improved.
Viscosity: 6,500cps
Solids: 51%
Colour: White, Clear when dry
Clean up: Warm water while wet
5L PRO C-A1 5
10L PRO C-A1 10
20kg PRO C-A1 20
PROBOND DS-1 DUST SUPRESSANT SIZE CODE
DS-1 is a dust suppressant for safe removal and sealing of asbestos, fibreglass, insulation, cement and a variety of airborne particles. DS-1 is also used as a general purpose dust suppressant in quarry yards, highway stabilisation and hydro seeding applications.
This product can be brushed, rolled or sprayed onto surfaces. DS-1 can be used neat or diluted up to 20 parts water to 1 part DS-1 depending on the desired result.
Viscosity: 3,200cps
Solids: 35%
Colour: White (Clear when dry); Blue; Red
Clean up: Warm water while wet
20kg PRO DS-1 20
220kg PRO DS-1 D
Coloured (Red or Blue)
20kg PRO DS-1 20 C
CONSTRUCTION ADHESIVES 7
BOSTIK WALLBOARD GOLD SIZE CODE
Gold Original is a flexible, high strength, easy to use, gap-filling adhesive. Designed for adhering to a wide variety of wallboards and panels - including plasterboards, wallboards, plywood, acoustic tiles, architraves and mouldings.
375ml B 022441
20 cartridges per carton
600ml B 022442
20 sausages per carton
BOSTIK TUF AS NAILS ORIGINAL SIZE CODE
Fast curing solvent based adhesive specifically for bonding sensitive substrates such as acrylic shower linings and polystyrene. Also suitable for bonding most other common building materials like steel, hardboard, plasterboard, cement sheet, timber and concrete.
375ml B TUFF C
20 cartridges per carton
DAP® 7000® SUBFLOOR & DECK SIZE CODE
7000 is a weatherproof, solvent-based formulation which meets APA, The Engineered Wood Association, Specification AFG-01, for subfloor construction. It meets ASTM Specification D 3498. Premium grade formulation reduces nailing requirements, floor squeaks and nail pops. Forms a permanent bond on wet, frozen and treated timber. Easy gunning. Interior/exterior use.
828ml D 27042
12 cartridges per carton
FULLERS MAX BOND™ SIZE CODE
Max Bond™ Construction Adhesive is a synthetic, rubber based adhesive designed primarily for the installation of flooring and wall panels. Max Bond™ Construction Adhesive is also ideal for bonding most common construction materials such as metal, timber and concrete.
375ml S MAX 375
20 cartridges per carton
MS POLYMER ADHESIVES & SEALANTS
QUILOSA MS35 MS POLYMER ADHESIVE & SEALANT SIZE CODE
MS35 cures to a tough, rubber-like consistency capable of absorbing vibration & movement, making it ideal for use in the construction, industrial and automotive industries. For bonding and sealing of dissimilar materials, especially where movement and vibration are a factor.
BONDS & SEALS Concrete, tile, brick, metals, most plastics, marble, granite, polystyrene, glass, rigid PVC, wood, MDF, melamine, aluminium, ceramics and most materials used in construction.
Black Cartridge
300ml Q MS35 B C
24 per Carton
Grey Cartridge
300ml Q MS35 G C
24 per Carton
White Cartridge
300ml Q MS35 W C
24 per Carton
Grey Sausage
600ml Q MS35 G S
12 per Carton
White Sausage
600ml Q MS35 W S
12 per Carton
QUILOSA FMS FAST CURE MS POLYMER ADHESIVE SIZE CODE
FMS cures to a stiff, rubber-like consistency capable of absorbing vibration & movement, making it ideal for use in the construction, industrial and automotive industries. Excellent wet tack enables FMS to hold parts in place within minutes of application.
BONDS Concrete, tile, brick, metals, most plastics, marble, granite, polystyrene, glass, rigid PVC, wood, MDF, melamine, aluminium, ceramics and most materials used in construction.
White Cartridge
280ml Q FMS C
12 per Carton
C
M
Y
CM
MY
CY
CMY
K
Pag 36 ing.pdf 1 20/07/11 15:05
POLYURETHANE ADHESIVES 9
SIKA SUPERGRIP 30 MINUTE SIZE CODESuperGrip 30 minute is a versatile, ready to use, 100% waterproof incredibly strong fast curing polyurethane based construction adhesive. It can be used for the bonding of timber, MDF, marble, stone, concrete, glass, fibre cement, tiles, rubber and metals. Bonds almost anything, including LOSP treated timber, non-drip and non-shrinkage. Interior and exterior use.
Working Time: 5-10min
Cure Time: 30min (Full cure 24hrs)
Solids 100%
Colour: Transparent Gel
Clean up: Acetone while wet
310ml S SG 30
12 per Carton
SIKA SUPERGRIP 2 HOUR POLYURETHANE GLUE SIZE CODESuperGrip 2 Hour is a versatile, ready to use, 100% waterproof incredibly strong fast curing polyurethane based construction adhesive. It can be used for the bonding of timber, MDF, marble, stone, concrete, glass, fibre cement, tiles, rubber and metals. Bonds almost anything, including LOSP treated timber, non-drip and non-shrinkage. Interior and exterior use. 2 hour cure.
Working Time: 10-20min
Cure Time: 2 hours (Full cure 24hrs)
Solids 100%
Colour: Transparent Gel
Clean up: Acetone while wet
310ml S SG 2
12 per Carton
WOODLOK WL 3500 4 HOUR POLYURETHANE GLUE SIZE CODEWOODLOK WL 3500 is a premium 100% waterproof single component liquid polyurethane adhesive. The adhesive foams when curing and drives into the wood fibres when used on timber and porous substrates. WL 3500 is primarily used as a wood adhesive but can also be used to bond just about any material provided one of the surfaces is porous. WL 3500 is suitable for most interior and exterior applications including furniture, laminating, cabinet making, joinery, fabrication of stainless steel bench tops.
Working Time: 15min
Cure Time: 4 hours (Full cure 24hrs)
Solids 100%
Colour: Honey coloured liquid
Clean up: Acetone while wet
Coverage: 6-8m2 per L
500ml WL 3500 500
5L WL 3500 5
WOODLOK WL 3600 30 MINUTE POLYURETHANE GLUE SIZE CODEWOODLOK WL 3600 is a premium 100% waterproof single component liquid polyurethane adhesive. The adhesive foams when curing and drives into the wood fibres when used on timber and porous substrates. WL 3600 is primarily used as a wood adhesive but can also be used to bond just about any material provided one of the surfaces is porous. WL 3600 is suitable for most interior and exterior applications including furniture, laminating, cabinet making, joinery and emergency repairs.
Working Time: 5min
Cure Time: 30 min (Full cure 24hrs)
Solids 100%
Colour: Honey coloured liquid
Coverage: 6-8m2 per L
Clean up: Acetone while wet
500ml WL 3600 500
5L WL 3600 5
SIKA BOOM-G POLYURETHANE FOAM SIZE CODESika Boom-G is a one part, multi position, high yield polyurethane adhesive foam. Sika Boom is used for fixing, insulating and filling connection joints around window and door frames, pipe entries around air conditioning vents and roller blind housings, etc. It is also used to insulate against sound, cold and draughts etc. Excellent for bonding polystyrene.
750ml S BOOM G
12 per Carton
SIKA BOOM-CLEANER SIZE CODEFor removal of fresh uncured polyurethane foam residues from Sika PU Foam applicators & equipment after use.
500ml S BOOM S
12 per Carton
SIKA BOOM-G DISPENSER GUN CODEThe Sika Boom-G Dispenser Gun for use with Sika Boom-G expanding gun foam. Allows controlled application of Sika Boom-G and is easily cleaned and maintained with Sika Boom-Cleaner.
S BOOM GUN
THE CANTAC RANGECANTAC’s self contained, environmentally friendly, portable canister system was designed for ease of use. The canister, equipped with a reusable gun and hose, eliminates the need for air assisted adhesive application systems. No power or compressor is required!
This approach significantly reduces set up and clean-up time. The canister system is almost maintenance free. No solvent is needed to flush out guns and messy pressure pots.
The spray pattern is consistent, delivering perfect results every time which eliminates human error caused by inconsistent spray patterns. Its portability enables you to apply adhesive in house or on site.
Once you have emptied the eco friendly canister, simply attach your gun and hose to a new one.
The empty canister is made from mild steel and can be easily recycled making it more environmentally friendly than traditional plastic containers.
CANISTERS & AEROSOLS 11
CANTAC HIGH-TAC CONTACT SPRAY ADHESIVE SIZE CODECANTAC HIGH-TAC is a premium high strength, high heat resistant contact spray adhesive formulated for bonding High Pressure Laminates (HPL) to MDF, particleboard and plywood. HIGH-TAC is also suitable for a wide variety of substrates and applications including furniture and upholstery work, automotive headliners and marine applications. Bonds: High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, moulded fiberglass, most plastics and many other materials.
Working Time: 1 minute - 2 hours (best results within 1hr)
Temperature Resistance: -40 – +120°C
Solids: 32 - 36%
Colour: Clear
Coverage: (Single sided) Canister 200m2 Aerosol 5m2
Recommended Tip: Cantac 9501
Cleaner: Citrus Cleaner or Acetone
17kg TAC HT C
575ml TAC HT A
12 per Carton
CANTAC HSE-TAC CONTACT SPRAY ADHESIVE SIZE CODEHSE-TAC is a premium low odour, high strength, high heat resistant contact spray adhesive with an extra-long working time formulated specifically for bonding Polyester wall coverings (Autex Composition® & Vertiface®) office partitions, High Pressure Laminates (HPL) to MDF, particleboard and plywood. Bonds: Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.
Working Time: 2 minutes - 24 hours (best results within 1hr)
Temperature Resistance: -40 – +120°C
Solids: 27 - 31%
Colour: Clear
Coverage: (Single sided) Canister 200m2 Aerosol 5m2
Recommended Tip: Cantac 652.307
Cleaner: Citrus Cleaner or Acetone
13.6kg TAC HSE C
575ml TAC HSE A
12 per Carton
CANTAC POLY-TAC CONTACT SPRAY ADHESIVE SIZE CODEPOLY-TAC is an industrial strength, contact spray adhesive formulated for bonding Expanded Polystyrene Foam (EPS) to itself and many other materials. POLY-TAC can be sprayed directly onto EPS surfaces without damaging the foam. Superior bond strength properties and exceptional tack make POLY-TAC an excellent choice for permanent bonding of EPS. Bonds: Polystyrene, urethane foam, particleboard, MDF, timber, concrete, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, moulded fiberglass, and many other materials.
Working Time: 1 minute - 4 hours (best results within 1hr)
Temperature Resistance: -40 – +85°C
Solids: 38 - 44%
Colour: Canister 200m2 Aerosol 5m2
Coverage: (Single sided) Canister 200m2 Aerosol 5m2
Recommended Tip: Cantac 9501
Cleaner: Citrus Cleaner or Acetone
13.8kg TAC POLY C
575ml TAC POLY A
12 per Carton
CANISTERS & AEROSOLS
CANTAC ULTRA-TAC
PRESSURE SENSITIVE SPRAY ADHESIVE SIZE CODE
ULTRA-TAC is a premium quality pressure sensitive spray adhesive formulated for bonding a wide variety of insulation materials and building wraps to steel, aluminium, wood and concrete. ULTRA-TAC can be used single-sided due to its ultra-tacky consistency, or double-sided as a contact adhesive. ULTRA-TAC will bond almost any substrate and remain permanently tacky. Bonds: ULTRA-TAC will bond almost any substrate and remain permanently tacky, substrates include: duct insulation, steel, aluminium, fiberglass, Expanded Polystyrene Foam (EPS), polyester, MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, corflute and most plastics.
Working Time: 2 minutes - 24 hours (best results within 1hr)
Temperature Resistance: -40 – +85°C
Solids: 40 - 46%
Colour: Clear
Coverage: (Single sided) Canister 200m2 Aerosol 5m2
Recommended Tip: Cantac 652.307
Cleaner: Citrus Cleaner or Acetone
13.6kg TAC ULT C
575ml TAC ULT A
12 per Carton
CANTAC CANISTER HOSE SIZE CODE
High quality solvent resistant hose for use with CANTAC Canister Contact Adhesives.
3.6m TAC HOSE
5.4m TAC HOSE M
7.2m TAC HOSE L
CANTAC CANISTER SPRAY GUN 23L CODE
Canister Spray Gun 23L is designed specifically for use with CANTAC Canister Spray Adhesives. It features a tapered needle that allows precise and variable amounts of adhesives to be dispensed. It also has an adjustable stop nut. Once the nut is positioned, the desired spray width is consistent.
TAC Gun
CANTAC CITRUS CLEANER AEROSOL 575ML SIZE CODE
CANTAC CITRUS CLEANER is a high performance natural citrus based cleaner and degreaser formulated for removing a variety of adhesives and contaminants. CITRUS CLEANER will effectively remove uncured contact adhesive, epoxy, polyurethane, silicone, paint, sealants, tape and decal residue, pencil, pen, crayon, waterproof marker, ink, grease, oil, tar and scuff marks. CITRUS CLEANER is designed specifically to clean CANTAC Guns, Tips and CANTAC adhesives from a variety of surfaces.
575ml TAC CC A
12 per Carton
CANISTERS & AEROSOLS CONTACT ADHESIVES 13
BOSTIK 709 CONTACT ADHESIVE SIZE CODE
709 is a solvent based contact adhesive of brushing viscosity. This adhesive is well established in the coach building and automotive industries as a multipurpose body trim adhesive. Bostik 709 has also proved very versatile in the shopfitting and HPL benchtop trades, and in the boat building, garage door, furniture and footwear industries, where it is widely used as a multipurpose adhesive.
Working Time: 10 – 30 minutes
Temperature Resistance: -20 – +140°C
Colour: Natural
Coverage: (Single sided) 3-4 m2 per L
Application Method: Brush
Cleaner/thinner: Glue Guru 05CR Solvent
1L B 709 1
4L B 709 4
20L B 709 20
BOSTIK 791 CONTACT ADHESIVE SIZE CODE
791 is a solvent based, sprayable contact adhesive especially formulated for bonding furnishing foam (polyurethane). The adhesive properties are tailored to give a fast grab, with no puckering of the joint line after 24 hours. For bonding furnishing foam (polyurethane) to itself, timber, fabric or other furnishing components.
Working Time: 2 – 15 minutes
Temperature Resistance: -40 – +100°C
Colour: Natural
Coverage: (Single sided) 7-12 m2 per L
Application Method: Brush, spray or roll
Cleaner/thinner: Glue Guru 05CR Solvent
20L B 791 20
BOSTIK 1500 CONTACT ADHESIVE SIZE CODE
1500 is a premium spray grade, high heat resistant neoprene rubber solvent based contact adhesive. Formulated for the furniture and joinery, shopfitting and boat building industries. Forms strong, permanent bonds between Formica and Laminex HPL laminates to MDF, particleboard and timber panels as well as most common building materials. Used extensively in the manufacture of benchtops. BOSTIK 1500 has high heat resistance up to 190oC making it an ideal adhesive for areas subject to high temperatures.
Working Time: 10 – 30 minutes
Temperature Resistance: -20 – +190°C
Colour: Natural & Red
Coverage: (Single sided) 6-10 m2 per L
Application Method: Spray
Cleaner/thinner: Glue Guru 05CR Solvent
Natural
4L B 1500 C 4
20L B 1500 C 20
Red
4L B 1500 R 4
20L B 1500 R 20
CONTACT ADHESIVES
BOSTIK HP STYRENE CONTACT ADHESIVE SIZE CODE
HP Styrene Adhesive is a synthetic rubber based adhesive which has excellent green strength and sprayability. It is suitable for bonding polystyrene foam to itself, steel, concrete, wood, masonry, hardboard, asbestos cement sheet, particle board, polystyrene, foam, aluminium, insulation bats, galvanised iron, FRP etc.
Working Time: 10 – 60 minutes
Temperature Resistance: -20 – +85°C
Colour: Green-blue
Coverage: (Single sided) 6-8m2 per L
Application Method: Spray, brush or roll
Cleaner/thinner: Glue Guru PSCR Solvent
4L B HPS 4
20L B HPS 20
BOSTIK UNIGRIP 999 HR
HEAT RE-ACTIVATABLE CONTACT ADHESIVE SIZE CODE
999 HR is a clear, high strength, heat resistant, heat re-activatable Polyurethane (PU) adhesive specially designed to provide high performance for specialised bonding applications like PVC inflatable boats and truck sidings. It is used in conjunction with Desmodur RFE crosslinker to provide increased heat and water resistance.
Working Time: 10 minutes - 12hrs (Heat reactivated)
Temperature Resistance: -20 – +160°C (with RFE @ 10%)
Colour: Clear
Coverage: (Single sided) 4-10m2 per L
Application Method: Brush
Preparation: Glue Guru MEK
Cleaner Glue Guru Toluene
Crosslinker: Desmodur RFE (8-10%)
1L B 999 1
4L B 999 4
20L B 999 20
BOSTIK 555 CONTACT ADHESIVE SIZE CODE
555 is a high quality, high strength solvent based adhesive, which can be applied by Brush, Roller or Spray. It features high immediate bond strength and a heat resistant bond results after full curing. Bostik 555 is a versatile adhesive used to give high quality bonds to most common building substrates, such as plywood, galvanized and other metal sheets, wood veneer, PVC flooring, gib board etc.
Working Time: 20 – 40 minutes
Temperature Resistance: -20 – +140°C
Colour: Natural & Red
Coverage: (Single sided) 4-10m2 per L
Application Method: Spray, Brush or Roll
Cleaner/Thinner Glue Guru 05CR Solvent
Red
20L B 555 R 20
Natural
20L B 555 C 20
EPOXIES 15
WEST SYSTEM 105 EPOXY RESIN SIZE CODE
105 Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear/pale yellow, low viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.
1L WZ 105 1
4L WZ 105 4
10L WZ 105 10
20L WZ 105 20
WEST SYSTEM 205 FAST HARDENER SIZE CODE
205 Fast Hardener® is a medium viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature.
Mix Ratio: 5 Parts 105 Resin to 1 Part 205 Hardener
Pot Life at 22°C: 9 to 12 minutes
Cure to a solid state: 6 to 8 hours
Cure to maximum strength: 1 to 4 days
Minimum use temperature: 4°C
Colour: Honey coloured liquid
Clean Up: Glue Guru Epoxy Solvent or Glue Guru Acetone
200ml WZ 205 200
800ml WZ 205 800
2L WZ 205 2
4L WZ 205 4
WEST SYSTEM 206 SLOW HARDENER SIZE CODE
206 Slow Hardener® is a low viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures.
Mix Ratio: 5 Parts 105 Resin to 1 Part 205 Hardener
Pot Life at 22°C: 20 to 25 minutes
Cure to a solid state: 10 to 15 hours
Cure to maximum strength: 1 to 4 days
Minimum use temperature: 16°C
Colour: Honey coloured liquid
Clean Up: Glue Guru Epoxy Solvent or Glue Guru Acetone
200ml WZ 206 200
800ml WZ 206 800
2L WZ 206 2
4L WZ 206 4
WEST SYSTEM 207 SPECIAL CLEAR HARDENER SIZE CODE
207 Special Clear Hardener™ was developed for coating and fiberglass cloth applications where an exceptionally clear, moisture-resistant, natural wood finish is desired. 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.
Mix Ratio: 3 Parts 105 Resin to 1 Part 207 Hardener
Pot Life at 22°C: 20 to 26 minutes
Cure to a solid state: 10 to 15 hours
Cure to maximum strength: 4 to 7 days
Minimum use temperature: 16°C
Colour: Light honey coloured liquid
Clean Up: Glue Guru Epoxy Solvent or Glue Guru Acetone
333ml WZ 207 333
1.33L WZ 207 1.33
3.35L WZ 207 3.35
6.7L WZ 207 6.7
expo
EPOXIES
WEST SYSTEM 403
MICROFIBER BLEND ADHESIVE FILLER SIZE CODE
403 is a fine fibre blend used as a thickening additive with resin/hardener to create a multi purpose adhesive, especially for bonding wood.
1L WZ 403 1
4L WZ 403 4
20L WZ 403 20
WEST SYSTEM 406 COLLOIDAL SILICA THIXOTROPIC MODIFIER SIZE CODE
406 is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting.
1L WZ 406 1
4L WZ 406 4
WEST SYSTEM 407 MICROBALLOON FAIRING FILLER SIZE CODE
407 is a microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis.
4L WZ 407 4
WEST SYSTEM 410 MICROLIGHT FAIRING FILLER SIZE CODE
410 Microlight™ is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand.
1L WZ 410 1
4L WZ 410 4
WEST SYSTEM 411 MICROSPHERE BLEND FILLETING FILLER SIZE CODE
411 filler is good for use in fillets. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Its colour is off white. It is often used as a filler for general above the water line fairing.
1L WZ 411 1
4L WZ 411 4
12L WZ 411 12
20L WZ 411 20
WEST SYSTEM 5:1 MINI PUMP SERIES C CODE
Suitable for 1.2Ltr & 4.8Ltr Resin / Hardener packs. WZ PUMP C
WEST SYSTEM 5:1 MINI PUMP SERIES D CODE
Suitable for 12Ltr & 24Ltr Resin / Hardener packs. WZ PUMP D
EPOXIES 17
WOODLOK WL8000
MARINE GRADE STRUCTURAL EPOXY GLUE SIZE CODE
WL 8000 is a high performance easy mix 1:1 ratio
thixotropic solvent free epoxy glue for industrial use.
WL 8000 is suitable for bonding structural elements
fabricated from wood, fibreglass, concrete, stone,
marble, pottery, metal, (ferrous and non-ferrous) and
some plastics. When cured WL 8000 is almost invisible
due to its transparent thin film characteristics.
COMMON USES Marine applications, exterior timber joinery, furniture construction, mitres and joins on fascia and weatherboards, repairing exterior joinery and broken window sills, laminating beams, bench top lamination.
ADVANTAGES Easy mix 1:1 ratio, gap filling, non slump on vertical surfaces, high strength, waterproof, excellent creep resistance, good chemical and abrasion resistance.
Mix Ratio: Easy mix 1:1 ratio
Pot Life at 20°C: 15-30mins depending on coating weight
Cure to a solid state: 8-12 hrs @ 20°C
Cure to maximum strength: 3 to 7 days
Minimum use temperature: 10°C
Colour: Clear/ Opaque
Clean Up: Glue Guru Epoxy Solvent or Glue Guru Acetone
500ml kit WL 8000 500
1L kit WL 8000 1
2L kit WL 8000 2
4L kit WL 8000 4
8L kit WL 8000 8
20L kit WL 8000 20
40L kit WL 8000 40
GLUE GURU RAPID CURE 5 MINUTE EPOXY GLUE SIZE CODE
Rapid cure is an ultra-fast curing resin with a gel-time of
3 - 5 minutes and handling strength in 10 to 20 minutes.
It is suitable for joinery and a wide variety of industrial
and marine applications. 100% waterproof.
Mix Ratio: Easy mix 1:1 ratio
Pot Life at 20°C: 3-5mins
Cure to a solid state: 10-20mins @ 20°C
Cure to maximum strength: 3 to 7 days
Minimum use temperature: 10°C
Colour: Clear
Clean Up: Glue Guru Epoxy Solvent or Glue Guru Acetone
500ml GG RC 500
1L GG RC 1
HOT MELT APPLICATORS
TEC 305 LOW MELT GLUE GUN 12MM CODE
Low melt Light industrial 12mm glue gun, lightweight and easy to use, illuminated on/off switch, removable stand and full hand trigger and removable nozzle. Perfect for Florists and Arts and Crafts. Low melt is safer to use and will not damage polystyrene or thin plastics.
Melt rate: 900g hr
Wattage: 18W (120W)
Operating Temperature: 130°C
PA TEC 305
TEC 805 HOT MELT GLUE GUN 12MM CODE
Medium size industrial 12mm hot melt glue gun with eco heater chamber design for low power consumption, robust and easy to use. Medium output, 3 minute warm-up time and illuminated on/off switch.
Melt rate: 1.8kg hr
Wattage: 30W (250W)
Operating Temperature: 195°C
PA TEC 805
TEC 810 HOT MELT GLUE GUN 12MM CODE
Heavy duty medium size 12mm hot melt glue gun, robust and easy to use with medium output, 2 minute warm-up time, fast recovery and illuminated on/off switch. Impressive melt rate of 2.0kg per hour.
Melt rate: 2.0kg hr
Wattage: 250W
Operating Temperature: 195°C
PA TEC 810
TEC 820 ADJUSTABLE TEMPERATURE GLUE GUN 12MM CODE
Heavy duty industrial adjustable temperature 12mm hot melt glue gun, robust and easy to use with high output, 2 minute warm-up time, fast recovery and illuminated on/off switch. Fitted with an adjustable thermostat that changes gun temperature to dispense all 12mm glue including low melt and polyamide. Temperature range of 130-195°C Huge melt rate of 2.5kg per hour.
Melt rate: 2.5kg hr
Wattage: 250W
Operating Temperature: Adjustable 130-195°C
PA TEC 820
HOT MELT APPLICATORS 19
TEC GP44 LOW TEMPERATURE LOW MELT GLUE POT 12MM CODE
The GP44 Glue Pot was designed for intricate florist and hobby gluing applications where small items, such as dried flowers used to make arrangements can be brought to the low melt adhesive reservoir for dipping. Excellent for floristry and arts and crafts.
Melt rate: 400g hr
Wattage: 20W
Operating Temperature: 130°C
PA TEC GP44
TEC ADJ012 SPREADER EXTENSION NOZZLE CODE
Extension Nozzle 6mm wide flat orifice, 30mm extension. Compatible with TEC 305, TEC 805, TEC 810, & TEC 820
PA N EXT F
TEC ADJ014 PRECISION EXTENSION NOZZLE CODE
Precision Extension Nozzle 1.25mm round orifice, 30mm extension. Compatible with TEC 305, TEC 805, TEC 810, & TEC 820
PA N EXT
TEC ADJ016 3 HOLE NOZZLE CODE
3 Hole Nozzle, 3 parallel adhesive lines 5mm apart Compatible with TEC 305, TEC 805, TEC 810, & TEC 820
PA N 3H
3M SCOTCH-WELD™ HOT MELT APPLICATOR LT QUADRACK (LOW TEMP) CODE
Designed to use with low temperature 3M™ Scotch-Weld™ Adhesives. Low operating temperature, rugged and reliable.
Melt rate: 1.6kg hr
Wattage: 150W
Operating Temperature: 129°C
3M PG LT
3M SCOTCH-WELD™ HOT MELT APPLICATOR TC QUADRACK CODE
Designed to use with 3M™ Scotch-Weld™ Adhesives, rugged and reliable.
Melt rate: 1.6kg hr
Wattage: 150W
Operating Temperature: 196°C
3M PG HT
HOT MELT STICKS
PROBOND H-223 HOT MELT ADHESIVE CLEAR SIZE CODE
H-223 is a general purpose clear hot melt adhesive with good adhesion to a wide variety of materials making it ideal for most applications, particularly hobby and craft work. H-223 is especially suitable when a clear glue line is desirable. Features good temperature stability (-15°C to + 65°C). Suitable for use in TEC 805, 810 or 820 hot melt applicators (195°C).
1kg PRO H-223 1
5kg PRO H-223 5
PROBOND H-303 PREMIUM HOT MELT ADHESIVE TAN SIZE CODE
H-303 is a premium hot melt adhesive displaying excellent adhesion to a wide variety of substrates including difficult plastics, wood, fabrics and metals making it ideal for most applications. H-303 features excellent temperature stability (-20°C to + 65°C) making it suitable for fridge/freezer applications. Suitable for use in TEC 805, 810 or 820 Hot melt applicators (195°C). The highest performing stick in New Zealand.
8pk PRO H-303 8
1kg PRO H-303 1
5kg PRO H-303 5
15kg PRO H-303
TECBOND LM44
HIGH PERFORMANCE LOW MELT ADHESIVE WHITE SIZE CODE
LM44 is a high performance adhesive formulated for use at low temperatures (129°C -160°C). It is suitable for substrates such as polystyrene, thin plastic films, balloons floristry and temperature sensitive materials that would normally be damaged by normal hot melt temperatures. Suitable for use in TEC 305 or 820 low melt applicators.
14pk PA LM44 s
500g PA LM44 500
5kg PA LM44
TECBOND 240
HIGH PERFORMANCE HOT MELT ADHESIVE SIZE CODE
240 is a white high performance, product assembly adhesive, which has excellent adhesion to wood, ceramics, light gauge metals and many plastics such as rigid PVC, ABS & acrylic. 240 melts down easily. Suitable for use in TEC 805, 810 or 820 hot melt applicators (195°C).
White (12mm sticks)
14pk PA TB 240 Ws
500g PA TB 240 W 500
5kg PA TB 240 W
Black (12mm sticks)
14pk PA TB 240 Bs
500g PA TB 240 B 500
5kg PA TB 240 B
21HOT MELT STICKS
3M™ SCOTCH-WELD™ HOT MELT ADHESIVE 3762 LM Q LIGHT AMBER SIZE CODE
3762 LM Q is a low melt, 100% solids thermoplastic adhesive. Excellent “Hot Tack”. Designed for packaging applications.
5kg 3M 3762 LM
3M™ SCOTCH-WELD™ HOT MELT ADHESIVE 3792 LM Q CLEAR SIZE CODE
3792 LM Q is a multi purpose low-melt with long bonding range adhesive.
1kg 3M 3792 LM 1
5kg 3M 3792 LM
3M™ SCOTCH-WELD™ HOT MELT ADHESIVE 3762 Q OFF WHITE SIZE CODE
3762 Q is a 100% solids thermoplastic adhesive with excellent “Hot Tack”. Designed for packaging applications.
5 kg 3M 3762Q
3M™ SCOTCH-WELD™ HOT MELT ADHESIVE 3792 Q CLEAR SIZE CODE
3792 Q is a 100% solids thermoplastic, clear, multi purpose adhesive.
1kg 3M 3792Q 1
5kg 3M 3792Q
3M™ SCOTCH-WELD™ HOT MELT ADHESIVE 3764 Q CLEAR SIZE CODE
3764 Q is a clear, 100% solids thermoplastic adhesive with good adhesion to plastics including polyolefins.
5kg 3M 3764Q
3M™ SCOTCH-WELD™ HOT MELT ADHESIVE 3738 Q TAN SIZE CODE
3738 Q is a general purpose adhesive with high delivery rate and long bonding range and good adhesion to wood.
1kg 3M 3738Q 1
5kg 3M 3738Q
CYANOACRYLATES
LOCTITE® 401™ ULTRA FAST CYANOACRYLATE SIZE CODE
401™ is designed for the assembly of difficult to bond materials which require uniform stress distribution and strong tension and/or shear strength. The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers.
Fixture Time: 5-20 seconds
Viscosity: 90cps
Temperature Resistance: -54 – +120°C
Colour: Clear
Clean up: Glue Guru Acetone
25ml LT 401 25
LOCTITE® 406™ DIFFICULT MATERIALS CYANOACRYLATE SIZE CODE
406™ Instant Adhesive is designed for bonding of plastics and elastomeric materials where very fast fixturing is required. For rapid bonding of plastics, rubbers, including EPDM and elastomers. Well suited for polyolefines in combination with Loctite Primer 770.
Fixture Time: 5-20 seconds
Viscosity: 20cps
Temperature Resistance: -54 – +120°C
Colour: Clear
Clean up: Glue Guru Acetone
25ml LT 406 25
LOCTITE ® 435™ TOUGHENED CYANOACRYLATE SIZE CODE
435™ Prism ® Low viscosity, clear, rubber toughened, one part, room temperature cure, instant adhesive designed for bonding metal, rubber and plastics. Excellent peel, impact and shear strength.
Fixture Time: 30-60 seconds
Viscosity: 175cps
Temperature Resistance: -54 – +100°C
Colour: Clear
Clean up: Glue Guru Acetone
25ml LT 435 25
LOCTITE ® 480™ TOUGHENED CYANOACRYLATE SIZE CODE
480™ Low viscosity, black, rubber toughened, one part, room temperature cure, instant adhesive designed for bonding metal, rubber and selected plastics. Excellent peel, impact and shear strength.
Fixture Time: 60-120 seconds
Viscosity: 150cps
Temperature Resistance: -54 – +100°C
Colour: Black
Clean up: Glue Guru Acetone
25ml LT 480 25
CYANOACRYLATES 23
QUILOSA CA-30 CYANOACRYLATE GLUE FOR WOOD SIZE CODE
CA-30 is an instant adhesive designed specifically for bonding of wood and MDF. It is ideal for kitchen and cabinet makers, picture framers, modellers, and thousands of other uses. CA-30 also performs well with substrates other than wood including plastic metals and rubbers.
Fixture Time: 5-30 seconds
Viscosity: 1,500cps
Temperature Resistance: -50 – +100°C
Colour: Clear
Clean up: Glue Guru Acetone
50gm Q CA30 50
QUILOSA CYANOACRYLATE FIX ACCELERANT SIZE CODEFIX ACCELERANT improves and speeds up adhesion and avoids the glue filtering into very porous materials. FIX ACCELERANT is most commonly used with wood and in conjunction with CA-30. It also can be used with other substrates and with all cyanoacrylates.
Aerosol
150ml Q CA A
QUILOSA CA-24 CYANOACRYLATE GLUE SIZE CODECA-24 is a general purpose, fast setting instant adhesive for bonding porous and non-porous materials including plastics, metals and rubber (nitrile, EPDM, neoprene, etc). CA-24 is a low viscosity glue; It dries clear leaving almost invisible glue joints. CA-24 is our most popular formulation and can be used in place of most cyanoacrylates.
Fixture Time: 5-15 seconds
Viscosity: 120cps
Temperature Resistance: -50 – +100°C
Colour: Clear
Clean up: Glue Guru Acetone
50gram Q CA24 50
QUILOSA CA-95 GENERAL PURPOSE CYANOACRYLATE GLUE SIZE CODECA-95 is a general purpose instant adhesive for bonding a wide variety of materials: rubber, metal, glass, some plastics and other non-porous surfaces. The joints obtained with this product are invisible and high strength.
Fixture Time: 5-15 seconds
Viscosity: 70cps
Temperature Resistance: -50 – +100°C
Colour: Clear
Clean up: Glue Guru Acetone
50gram Q CA95 50
3M SCOTCH-WELD SIGEL CYANOACRYLATE SIZE CODEScotch-Weld SIGel instant superglue is a fast curing, very high viscosity Ethyl Cyanoacrylate based adhesive. The new formulation shows greater surface insensitivity thus allowing faster bonding of all substrates and improved performance on wood, card and metals.
Fixture Time: 10-60 seconds
Viscosity: Non slump Gel
Temperature Resistance: -65 – +180°C
Colour: Clear
Clean up: Glue Guru Acetone
20ml 3M RL SG
SPECIALTY ADHESIVES
LOCTITE® 3090 2-K GAP FILLING CYANOACRYLATE CODE
3090™ is a two component, fast curing, gap filling adhesive with excellent bonding characteristics to a variety of substrates including plastics, rubbers and metals. 3090™ is designed for the assembly of parts with varying or undefined bond gaps up to 5mm. The gel consistency prevents adhesive flow even on vertical surfaces. 3090™ is also suited for bonding porous materials such as wood, paper, leather and fabric. Suited for plastics, metals and for polyolefins in combination with Primer Loctite® 770
Fixture Time: 90-180 seconds
Viscosity: Thixotropic gel
Temperature Resistance: -54 – +80°C
Colour: Clear
Clean up: Glue Guru Acetone
Comes with 7 Nozzles
LT 3090
Extra nozzles 10 pack LT 3090 N
LOCTITE® 770 PRISM® PRIMER SIZE CODE
Adhesion promoter for Loctite® instant adhesives on hard-to-bond plastics and elastomers. Especially for polyoelefins such as PE and PP. Suitable for PTFE and thermoplastic elastomers.
100ml LT 770
LOCTITE® 324™ SPEEDBONDER™ STRUCTURAL ADHESIVE SIZE CODE
324™ is a high impact, toughened, two step acrylic, no mix multi-surface structural adhesive. Loctite 324 is solvent resistant and, when used in conjunction with Loctite Primer 7075™, is ideal for large gap applications. Loctite 324 offers the strength of an epoxy and the speed of an instant adhesive.
Fixture Time: 5-10 minutes
Viscosity: Syrup
Temperature Resistance: -54 – +135°C
Colour: Yellow
Clean up: Glue Guru Acetone
50ml LT 324 50
LOCTITE® 7075™ ACTIVATOR SIZE CODE
An acetone-based activator that promotes the proper cure of Loctite® 324™ Speedbonder™ Structural Adhesive.
100ml LT 7075
CAULKS 25
DAP® ALEX FAST DRY SIZE COLOUR CODE
DAP® Alex Fast Dry® is an acrylic latex caulk plus silicone. It is ideal for projects that require painting shortly after caulk application. In 40 minutes, the caulk forms a tough outer skin that’s dry enough to paint over with latex or oil based paints, cutting standard waiting times by 80 minutes. It provides excellent flexibility to resist expansion and contraction without cracking. Suitable for indoor/outdoor applications. Cured caulk is mould and mildew resistant. Fast drying formulation that is perfect for winter or time critical projects.
Ready to paint: 40 minutes
Tooling time: 5 minutes
Tack free time: 15 minutes
Dynamic Joint Movement: +/- 12.5%
Vehicle: Acrylic Copolymer
Paintable: Yes
Colour: White
300ml White D 18670
12 per carton
DAP® DYNAFLEX 230® SIZE COLOUR CODE
DAP® Dynaflex 230® premium and waterproof sealant combines outstanding durability, adhesion and flexibility with easy tooling, low odour and water clean up. Indoor/outdoor use. Ideal for sealing out air leaks to improve energy efficiency. Cured sealant is mould and mildew resistant. Dynaflex 230® can be painted with latex and oil based paints or left unpainted. Best water-based formula on the market for high movement areas.
Ready to Paint: 2-4 hours
Tooling time: 10 minutes
Tack free Time: 30 minutes
Dynamic Joint Movement +/-25%
Vehicle: Advanced Acrylic Polymer
Paintable: Yes
300ml White D 18275
300ml Almond D 18306
300ml Cedar D 18412
300ml Brown D 18302
300ml Alumin-ium Grey
D 18301
300ml Black D 18280
12 per carton
DAP® ELASTOPATCH® TEXTURED SIZE COLOUR CODE
DAP Elastopatch® is an outstanding elastomeric patching compound that eliminates recurring cracks by providing a permanently flexible fill that blends perfectly with solid plaster and textured finishes. Superior paintability. Suitable for indoor/outdoor applications. Unique textured finish. Looks just like solid plaster, concrete and textured surfaces.
Ready to Paint: 1 hour
Tooling time: 10 minutes
Tack free Time: 30 minutes
Dynamic Joint Movement +/-12%
Vehicle: Acrylic Polymer
Paintable: Yes
300ml Off White
D 12286
12 per carton
FILLERS
DAP® CRACKSHOT® PLASTER FILLER SIZE CODE
DAP® Crackshot® is a high performance filler, that won’t crack, crumble or flake. Its ready-to-use smooth, white formula spreads easily for fast, professional results. It has a de-aired consistency for excellent tooling and easy smoothing to a feather edge. Crackshot® sands effortlessly and provides unsurpassed paintability. It does not flash or gloss low sheen/flat paint. Crackshot® cures quickly, but has a long working time and will not dry out on your knife. A painter’s dream! A must have product for the professional painter. Colour: white.
237ml D 12374
946ml D 12378
EVERCOAT LITE WEIGHT® FILLER SIZE CODE
Our #1 selling, high-quality, clog-free, lightweight body filler is a great value with its smooth spreading, easy sanding features. Non-clog formula adds greater value in sandpaper savings. Blue cream hardener included.
3.78L EC LW 4
Hardener Crème
78g EC H
SOLVENTS 27
GLUE GURU 05CR CONTACT ADHESIVE CLEANER & THINNER SIZE CODE
Premium blended solvent for thinning and cleaning most neoprene based contact adhesives. Suitable for use with Bostik 709, 1500, 1181, 555, 791, 1456, Ados F2, F3, DAP Weldwood contact adhesive and many more.
1L GG 05CR 1
4L GG 05CR 4
20L GG 05CR 20
GLUE GURU ACETONE SIZE CODE
General purpose solvent with a variety of uses. Used in the marine industry for the clean up of Epoxy and Polyester Resins. Excellent preparation solvent for cleaning surfaces prior to gluing.
1L GG ACE 1
4L GG ACE 4
20L GG ACE 20
GLUE GURU EPOXY SOLVENT SIZE CODE
Formulated specifically for use with Epoxy Resin/Glue. Used to thin or clean unwanted epoxy from surfaces. Mixes easily with most Epoxy.
1L GG ESOL 1
4L GG ESOL 4
20L GG ESOL 20
GLUE GURU ISOPROPYL ALCOHOL SIZE CODE
Multi purpose cleaner for glass, plastics & electronics. Preferred preparation cleaner for silicone, MS Polymer and 3M VHB Tape. Sterilizes household surfaces including phones, switches, doorknobs, office and medical equipment. Commonly used in the printing industry.
50/50 spray 1L
GG ISO 1S
1L GG ISO 1
4L GG ISO 4
20L GG ISO 20
SOLVENTS
GLUE GURU MEK SIZE CODE
Clear colourless volatile liquid with a strong odour. MEK has good solvency and dissolves many substances making it a desired solvent in processes involving: gums, synthetic resins, cellulose acetate, nitrocellulose coatings, vinyl films and many rubbers. Commonly used as a paint thinner and high quality gun wash. Also the preparation solvent for flexible PVC prior to gluing.
1L GG MEK 1
4L GG MEK 4
20L GG MEK 20
GLUE GURU TOLUENE SIZE CODE
Toluene is a strong solvent for thinning and cleaning most neoprene and polyurethane based contact adhesives. Cleaning heavily contaminated surfaces from grease, paint inks etc. Also a useful solvent for cleaning tools and spray equipment.
1L GG TOL 1
4L GG TOL 4
20L GG TOL 20
WOODLOK GLAZE-AWAY SOLVENT CLEANER SIZE CODE
GLAZE-AWAY is the original solvent based surface cleaner formulated to remove hot-melt residue, contact adhesive and handling marks. WOODLOK GLAZE-AWAY is safe on PVC edges as well HPL laminates, Melamine® and Melteca®.
4L WL GA 4
20L WL GA 20
WOODLOK DSOLV-AWAY CITRUS CLEANER SIZE CODE
DSOLV-AWAY is a low odour, high performance citrus based surface cleaner. Formulated to remove hot melt residue, contact adhesive, epoxy, polyurethanes, tape residue, pencil, pen, crayon and waterproof markers. WOODLOK DSOLV-AWAY is safe on PVC and ABS edges as well HPL laminates, Melamine® and Melteca®. Completely evaporates and leaves no smear marks.
1L Spray WL DSA 1S
1L WL DSA 1
4L WL DSA 4
20L WL DSA 20
SINGLE SIDED TAPES 29
3M 2308 MASKING TAPE SIZE CODE
2308 High Performance Masking Tape is an excellent ‘all-rounder’. It offers great conformability and handling properties with its crepe paper backing and synthetic rubber adhesive system making it suitable for paint masking, sealing and bundling applications.
Tan 50m
18mm 3M 2308 18
24mm 3M 2308 24
48mm 3M 2308 48
3M SCOTCH® 233+ PERFORMANCE GREEN MASKING TAPE SIZE CODE
233+ is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. 233+ also has excellent resistance to paint bleed-through and good temperature and solvent resistance.
Green 55m
3mm 3M 233+ 3
6mm 3M 233+ 6
12mm 3M 233+ 12
18mm 3M 233+ 18
24mm 3M 233+ 24
36mm 3M 233+ 36
48mm 3M 233+ 48
TAPE SPEC PROFESSIONAL CLOTH TAPE MATT BLACK SIZE CODE
High cohesive strength rubber adhesive designed to remove cleanly with extra strength 80 mesh fabric scrim backing with special matt low reflective finish. Hand tearable and water resistant. Excellent for exhibition, TV/film work, sports stadiums and bookbinding.
Black 25m
48mm TS TCB 48
TAPE SPEC PERFORMANCE CLOTH TAPE WHITE SIZE CODE
An excellent combination of strength, moisture resistance and conformability. Superior binding and holding power from the special rubber adhesive system. Easy to unwind and tearable by hand. Colour range available. Multi purpose repair, sealing, bundling and reinforcing tape for indoor and exterior uses.
White 25m
48mm TS TCW 48
3M 8979 PERFORMANCE PLUS REMOVABLE DUCT TAPE SIZE CODE
8979 has a unique construction that allows for both permanent and temporary applications indoor and outdoor. It is removable with little or no adhesive residue from most opaque surfaces up to 6 months after application.
Blue 22.8m
48mm x 22.8m
3M 8979
DOUBLE SIDED TAPES
3M 5952 BLACK VHB TAPE SIZE CODE3M 5952 VHB Tape offers flexible, durable and strong bonding options for a multitude of industries and applications. VHB Tape’s closed cell acrylic construction helps to seal against moisture and most solvents and provides a long term resistance to UV and temperature cycles. Shock absorbing and sound dampening. Fast, clean and simple to apply, reducing assembly costs. 5952 is the most versatile VHB tape. Will bond most substrates including wood concrete, metals and plastics.
Black 33m (1.1mm)
12.7mm 3M 5952 12
19mm 3M 5952 19
25.4mm 3M 5952 25
Clamshell 13.7m
19mm 3M 5952 C
3M 4910 CLEAR VHB TAPE SIZE CODE3M 4910 VHB Tape is a crystal clear high strength bonding tape for when an optically clear bond is required. Suitable for use on high surface energy surfaces, such as glass and metals.
Clear 33m (1mm)
6mm 3M 4910 6
12.7mm 3M 4910 12
19mm 3M 4910 19
25.4mm 3M 4910 25
Clamshell 13.7m
19mm 3M 4910 C
3M 94 VHB PRIMER SIZE CODEPrimer specially formulated for use with VHB Tapes. Increases the adhesion of all tapes especially on difficult plastics such as PP & PE. Clear, water thin, dries in 5 minutes.
236.5ml 3M 94 240
950ml 3M 94 950
3M 9888T DOUBLE SIDED THIN BONDING TISSUE TAPE SIZE CODEHigh initial strength and excellent peel and shear performance on both high and low surface energy materials. Good adhesion to most common substrates. Tissue carrier means tape is hand tearable and very conformable. Will stick to most surfaces.
Clear 50m
12mm 3M 9888 12
18mm 3M 9888 18
24mm 3M 9888 24
36mm 3M 9888 36
48mm 3M 9888 48
TAPE SPEC ORAMOUNT 1816 DOUBLE SIDED FOAM TAPE SIZE CODEDouble Coated 1.6mm Polyethylene Foam Tape combined with a conformable foam and an aggressive high strength acrylic adhesive. Good general purpose tape for uneven substrates. Used mainly for non-critical bonding or used in conjunction with adhesive.
White 25m
18mm TS 1816 18
24mm TS 1816 24
36mm TS 1816 36
TAPE SPEC 3360 REMOVABLE EXHIBITION TAPE SIZE CODEDesigned as a double sided exhibition tape for easy and clean removal from most surfaces. Very good initial tack necessary to grip to the carpet and various different floor surfaces. Excellent tensile strength with the cloth scrim carrier helping with the removal without breaking. Used for temporary holding of carpets, carpet tiles and other floor coverings during exhibitions and displays.
Natural 25m
50mm x 25m
TS 3360 50
RESPIRATORY PROTECTION 31
GLUE GURU 929V P2 VALVED CUPPED RESPIRATOR SIZE CODE
Our most comfortable disposal respirator, featuring double welded straps, soft nose bridge easy breathe valve. Rated P2 which will filter finer particles than P1 masks. For mechanically generated particles e.g. grinding, sanding, crushing and sawing. Easy breathe valve prevents heat and moisture build up, making breathing easier.
Most comfortable, best value for money, P2 for extra protection.
10 per carton
PG 929V
3M 6000 SERIES RESPIRATOR FACE PIECE SIZE CODE
3M™ Half Face piece 6000 Series is designed to be used with 3M™ 2000 Series Filters and 3M™ 6000 Series Cartridges. When combined with proper items, the respirator provides a high level of protection for industrial applications. Approved to AS/NZS1716.
Small 3M 6100
Medium 3M 6200
Large 3M 6300
3M 7500 SERIES RESPIRATOR FACE PIECE SIZE CODE
3M™ Premium Silicone Half Face Respirator 7500 series provides maximum comfort for wearers. Designed for use with 3M™ 2000 Series Filters and 3M™ 6000 Series. When combined with the correct items, the respirator provides a high level of protection for industrial applications. Approved to AS/NZS1716.
Small 3M 7501
Medium 3M 7502
Large 3M 7503
3M™ 68P71 FULL FACE RESPIRATOR KIT CODE
3M Full face piece helps prevent paint overspray and dusts from getting in eyes. Helps reduce exposure to organic vapours and mists associated with paint spray, pesticide applications, solvents, and thinners.
CONTAINS 1 X Full Facepiece 1 X Pair 6001 Cartridges (6051) 2 X Pair 5N11 Pre Filters 1 X Pair Filter Retainers
3M 68P71
RESPIRATORY PROTECTION
3M® PARTICULATE FILTER 2125 P2 CODE
For protection against certain dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete. Suitable for use on 3M 6000, 7500 Half Face and 68P71 Full Face Respirators.
Pair
3M 2125
3M 6051 ORGANIC VAPOUR FILTER CODE
Protection from using organic solvents e.g. Toluene, Xylene and MEK. Also degreasing, mixing, using paint thinners, lacquers and glues.
Pair
3M 6051
3M 6059 MULTI-GAS COMBINATION FILTER CODE
Protection from a variety of chemicals such as solvents, chlorine, hydrogen chloride, sulphur dioxide, hydrogen fluoride, hydrogen sulphide and ammonia.
Pair
3M 6059
3M 5N11 (5925) N95 PARTICULATE FILTER, P2 CODE
NIOSH approved for environments containing certain non-oil based particles. Fits 3M 6000 Series Cartridges. Can be used with all 3M Full or Half Facepiece Respirators. Requires 3M Filter Retainer 501.
10 pack
3M 5N11
3M 501 FILTER RETAINER CODE
501 Filter Retainer is used to hold 3M Particulate Filters 5N11 in place. Attaches to 3M 6000 Series Cartridges which can be used on all 3M Half and Full Facepiece Respirators.
Pair
3M 501
3M 504 RESPIRATOR CLEANING WIPES CODE
Alcohol-free, individually packaged wipes for 3M. Elastomeric Face Piece Respirators. Will not damage the face piece materials.
100 pack
3M 504
GLOVES & COVERALLS 33
SURESHIELD BREATHABLE LAMINATE COVERALLS SIZE CODE
Manufactured from strong, water resistant yet breathable fabric. Offers protection from chemical splashes and non-directional sprays. Full body zip, elasticised hood, ankles and cuff.
Medium DI SS M
Large DI SS L
XLarge DI SS XL
XXLarge DI SS XXL
HANDPLUS+ LATEX GLOVES LOW POWDER SIZE CODE
These gloves offer protection for a variety of applications including food processing and preparation, printing, laboratory and medical use. Non-sterile, ambidextrous, examination gloves made from natural latex for a close fit and excellent feel.
Small HPG LTX S
Medium HPG LTX M
Large HPG LTX L
XLarge HPG LTX XL
HANDPLUS+™ HIGH RISK GLOVES POWDER FREE SIZE CODE
These gloves are made from extra strong latex with an extended cuff (30cm) for added protection. The textured surface helps grip and the beaded cuff makes donning easy.
Blue colour for easy identification, these high risk gloves eliminate the need for double gloving.
Small HPG HR S
Medium HPG HR M
Large HPG HR L
XLarge HPG HR XL
XXLarge HPG HR XXL
BLACK DRAGON NITRILE GLOVES POWDER FREE SIZE CODE
These gloves are made from 100% nitrile rubber that is 5 times stronger than latex.
Nitrile is also chemically resistant making it a popular choice when handling oils, fuels and a wide range of chemicals.
Non-slip textured finger tips for greater grip and a beaded cuff for added strength.
Medium HPG BD M
Large HPG BD L
XLarge HPG BD XL
CAULKING GUNS
THE SINTEX RANGESince the inception of cartridge packed sealants and adhesives, tradespeople have been continually frustrated with the range of caulking guns available on the New Zealand market. These so called “trade guns” constantly bend, break and fall apart.
It was because of these issues that the SINTEX brand of guns was created. What ensued was a total rethink of every aspect of the gun and a complete range was created to satisfy the varying requirements of the trade user.
Some of the key improvements include rubber grip handles on all models including the economy model, three different thrust ratios to accommodate gunning out even the thickest of products and reinforced steel carriages that won’t bend or skew, plus other advantages too long to list.
We believe these are the most advanced guns ever made - tough, reliable and built to last. Once you’ve used a Sintex gun, you’ll wonder how you ever did without it.
SINTEX R12:1 STANDARD RATIO CODE
12:1 thrust ratio cartridge gun. Best all-rounder for low, medium and some high viscosity products. Adhesives, sealants, caulks and silicones.
Comfort grip handle. Fits 300 & 375ml tubes. Dripless mechanism. Reinforced rotating carriage. Twin gripper plate. Ladder hook.
SX R 12:1
SINTEX R12:1L STANDARD RATIO CODE
12:1 thrust ratio large cartridge gun for construction. Best all-rounder for low, medium and some high viscosity products.
Comfort grip handle. Fits 828 & 900ml tubes. Dripless mechanism. Reinforced rotating carriage. Twin gripper plate. Ladder hook.
SX R 12:1 L
SINTEX R12:1S STANDARD RATIO CODE
12:1 thrust ratio sausage gun. Best all-rounder for low, medium and some high viscosity products. Adhesives, sealants, caulks and silicones.
Comfort grip handle. Fits 600ml sausages. Dripless mechanism. Reinforced rotating carriage. Twin gripper plate. Ladder hook.
SX R 12:1 S
S
35CAULKING GUNS
S
SINTEX R26:1 CODE
26:1 thrust ratio cartridge gun. Best for dispensing high viscosity products. Effortlessly gun out thick products like MS polymers and polyurethanes.
Comfort grip handle. Fits 300ml & 375ml tubes. Industrial mechanism. Reinforced rotating carriage. Twin gripper plate. Ladder hook.
SX R 26:1
SINTEX R26:1S CODE
26:1 thrust ratio sausage gun. Best for dispensing high viscosity products. Effortlessly gun out thick products like MS polymers and polyurethanes.
Comfort grip handle. Fits 600ml sausages. Industrial mechanism. Rotating carriage. Twin gripper plate.
SX R 26:1 S
SINTEX R26:1D CODE
26:1 thrust ratio dual cartridge gun. Designed for dispensing 1:1 & 2:1 two component MS Polymers, Polyurethanes, Epoxies and Anchoring Adhesives.
Comfort grip handle. Fits up to 400ml tubes. Dripless mechanism. Reinforced rotating carriage. Twin gripper plate. Heavy duty construction.
SX R 12:1 D
D
ACCESSORIES
GLUE GURU DISPOSABLE MIXING CUP SIZE CODE
Cost effective 600ml printed cups for mixing and measuring a variety of paints, adhesives and resins. These cups have measurements from 50ml-600ml and ratio measurements of 2:1, 3:1, & 4:1. The measurements take away the guess work and inaccurate mixes.
600ml single
GG PMC 600 S
600ml 50 Pack
GG PMC 600
GLUE GURU PRO BOTTLES SIZE CODE
Designed specifically for dispensing PVA Glue and various water-based products. The soft squeezable H.D.P.E plastic allows for easy dispensing with minimal user fatigue. The 45mm wide neck allows the user to refill the bottle fast without mess meaning one bottle can be refilled for years minimising unnecessary waste.
250ml GG B250
500ml GG B500
1L GG B1
GLUE GURU SOLVENT RESISTANT SPRITZER SIZE CODE
Premium quality solvent resistant “Spritzer” spray bottles resistant to solvents, chemicals, acids, adhesives and paints. Thick plastic side wall and rugged trigger.
1L GG BS1
KDS GRIP FIT AUTO-LOCK KNIFE SIZE CODE
All round industrial cutter for general trade use. Comfortable, rubberised non-slip grip, with convenient Auto Lock. Includes 3 KDS Power Black Blades. Made in Japan.
18mm KDS K18
TAJIMA LC650 ROCK HARD CUTTER SIZE CODE
Super heavy-duty, ultra-sharp, 25mm wide x 0.7mm thick rock hard 7-segment snap-blade. Thick elastomer handle for comfort and non-slip grip. Includes 3 spare blades in storage case.
25mm x 0.7mm
T K25
37ACCESSORIES
KDS POWER BLACK EVO BLADES SIZE CODE
Heat tempered (toughened) blades made from the highest quality steel which allows the best angles possible to be honed on the blade.
”We regularly have tradesmen tell us that KDS Black Blades last for 3 or 4 times as long as the blades they had previously used”.
10 pack
9mm KDS B9
18mm KDS B18
25mm KDS B25
50 pack
18mm KDS B18 50
TAJIMA LCB65 BLADES SIZE CODE
Super heavy-duty ultra-sharp 25 x 0.7mm snap-blades, 6 snap-off segments for a total of 7 cutting edges per blade.
20 pack
25mm T B25 20
NOTES
Ph +64 9 444 4878 | E [email protected] | www.glueguru.co.nzNEW ZEALAND’S #1 ADHESIVES SUPPLIER