GLOBAL ONLINE AUCTIONSTARTING: September 24, 7:00 am ENDING: September 25, 9:00 am PDT

COPERION-KEYA MACHINE CO. LTD. STS-50 TWIN SCREW PLASTIC EXTRUDER

VAN DORN 300RS-30F PLASTIC INJECTION MOLDERBOY MACHINES INC. 50M

HORIZONTAL INJECTION MOLDER

ASSET ADVISORY & AUCTION SERVICES

For more information including a photo gallery, equipment list, and more, please visit

Items subject to prior sale. Buyers are advised &encouraged to inspect equipment and read

all Terms and Conditions prior to auction.

www.hgpauction.com

Contact InformationDavid Barkoff, Tel: +1 650.649.0147Email: dbarkoff@hgpauction.com

Multiple LocationsThere Will Be A Live Public Preview Sept. 23 & 24 From 9:00am To 4:00pm, Local Time.

Scan this QR Code with your smartphone for More Information.

Complete Plant Closure On Behalf of MBA Polymers: A Leading Producer of Post-Consumer Recycled Plastics.

Sale Featuring: Process Lines, Extrusion Lines, Machine Tools, Spare Parts, Rolling Stock, Tanks, Facility Support, and More!

For additional information, Contact: David BarkoffTel: +1 650.649.0147 Email: dbarkoff@hgpauction.com

ASSET ADVISORY & AUCTION SERVICES

ASSET ADVISORY & AUCTION SERVICES

ASSET ADVISORY & AUCTION SERVICES

Global Online AuctionSTARTING: September 24, 2013, 7:00 am ENDING: September 25, 2013, 9:00 am

ZERMA GSH600/800 GRANULATOR, 3 PH MOTOR, 460V, 60 HZ

INJECTION MOLDERS1 – Boy Machines Inc. 50M HorizontalÿInjection Molder, 50 Tons,220V, 3 PH, 60 Hz, Total Current 56.3 Amps, Motor Current 39A, Heater Current 179A, Hydraulic Pressure 2320 PSI, Total Weight 4900 lbs., Year of Production 1997, Maximum injection volume 29 oz1 – Coperion-Keya Machine Co. Ltd. STS-50 Twin Screw Plastic Extruder, Machine Type - Block, Screw Diameter o50, Rotating Speed of Screw 60-600, Ratio of Length/Diameter 32-52, Machine No. STS 591, Heating Capacity 28-48 kW, Power of Main Motor 90 kW, Production Capacity 300kg-450kg per hour, Weight 25kN, Delivery Date 0603, with 3 PH Induction Motor, Gala 50 Gal CLS s/n 10100285, 4 x 4 DV s/n 10100285, Gala Dryer 8.1 CLS Rotator Speed 1750 +/- 5% s/n 10100285, Gala Operator Interface s/n 10100285 460V AC, 3 PH, 60 Hz, 90 Amps, Cooling System with Heat Exchanger1 – Van Dorn 300RS-30F Plastic Injection Molder, mfg. 2/1980, s/n 300RS-30F-1254, Tonnage 300, 30 oz. injection, 24” x 24” Between Tie Bars

EXTRUDER MACHINE1 – Custom Plastic Extruder Machine. Overall Footprint 4’Lx3’Wx6.5’H

BOY MACHINES INC. 50M HORIZONTAL INJECTION MOLDER

VAN DORN 300RS-30F PLASTIC INJECTION MOLDER

COPERION-KEYA MACHINE CO. LTD. STS-50 TWIN SCREW PLASTIC EXTRUDER

CUSTOM PLASTIC EXTRUDER MACHINE

To view a complete asset list,visit our website @ www.hgpauction.com

Live Public PreviewMonday & Tuesday, September 23rd & 24th, (9:00am - 4:00pm) Local Times.

ASSET ADVISORY & AUCTION SERVICES

ASSET ADVISORY & AUCTION SERVICES

ASSET ADVISORY & AUCTION SERVICES

BLOWERS3 – Roots 68-U-RAI Rotary Lobe Blower with 25 HP MotorLot – (3) Rooftop Blowers: (1) 5 HP Motor and 1725 RPM, (1) 25 HP Motor and 1770 RPM, (1) 20 HP Motor and 1770 RPM

COOLING TOWER1 – Evapco AT464 Cooling Tower with Pump

CONTACT ANGLE METER1 – Kernco CAM-Micro Contact Angle Meter

GALA 3016 BF-RD SPIN DRYER CUMBERLAND GRANULATOR

SATAKE SMII-8201EP ESM COLOUR SORTER

AMERICAN AIR FILTER FABRI-PULSE BAGHOUSE GLOUCESTER ENGINEERING CO. INC. 1428 GRANULATOR

SEPARATORS1 – Eriez N12-Polymag30-2/480 Magnet Separator, Style 9985721, 480V, 6A, 60 Hz, 3 PH, s/n 197188, with Rare Earth Magnet Roll Separator, VM3155B Vibratory Feeder, N12-Polymag30-2/480 Control System, Complete Installation, Operation and Maintenance Manual1 – Satake Smii-8201EP ESM Colour Sorter, p/n 490129-779, Gr Wt. 525kg1 – Search and Separate Mag 4200 All Metal Separator

SPIN DRYERS7 – Gala 3016 BF-RD Spin Dryer, 750 RPM

GRANULATORS1 – Gloucester Engineering Co. Inc. 1428 Granulator1 – Zerma GSH600/800 Granulator, 3 PH Motor, 460V, 60 Hz

ROTARY SHREDDER1 – Holzmag (Metso) MULTIROTOR MK-300/1400 Single-Shaft Rotary Shredder HOLZMAG (METSO) MULTIROTOR MK-300/1400 SINGLE-SHAFT ROTARY SHREDDER

For additional information, Contact: David BarkoffTel: +1 650.649.0147 Email: dbarkoff@hgpauction.com

ASSET ADVISORY & AUCTION SERVICES

ASSET ADVISORY & AUCTION SERVICES

ASSET ADVISORY & AUCTION SERVICES

Global Online AuctionSTARTING: September 24, 2013, 7:00 am ENDING: September 25, 2013, 9:00 am

PNEUMATIC SEPARATOR1 – American International Manufactur-ing 64-10 Enclosed Return Air Pneumatic Separator

LAB OVEN / FURNACE1 – Blue M POM-206B Lab Oven1 – Thermolyne F47915 Benchtop Furnace

FREEZER1 – Kenmore No.5 Freezer (Chest Type ; Dim 24”Lx22”Wx34”H)

FEEDERS / SHAKERS1 – Acrison ACR-100 Feeder, On Stand With Control Box. Footprint 4’lx2’Wx8’H1 – Box Feeder Bin with Conveyor (28” x 4’)1 – Joest-Vibratech JV1 Industrial Shaker1 – JOST GmbH & Co. KG FUF 1850/ - 200X 2500 Vibratory Feeder, Machine No. 00.70230, mfg. 2000

BAGHOUSE1 – American Air Filter Fabri-Pulse Baghouse size 4v168

CONVEYORS1 – 250TB Belt Conveyor, 16’ x 271 – Elevator with 23” Conveyor belt1 – Hustler Conveyor, 36” wide x 27’-5 7/8” Long Flexwall Conveyor1 – Screw Conveyor, 10’ with 2 HP Motor HERMION BV TWISTER 5500 CENTRIFUGAL SPINNERLARGE HOPPER

MBA POLYMERS ENCLOSED RETURN AIR PNEUMATIC SEPARATOR

MAC 19AVRC14 PROCESS AIR-VENT FILTER SILO CHARGE STATIONERIEZ N12-POLYMAG30-2/480 MAGNET SEPARATOR

MUNTERS CARGOCAIRE HC-300 DEHUMIDIFIER

HUSTLER CONVEYOR, 36” WIDE X 27’-5 7/8” LONG FLEXWALL CONVEYOR

Motors, Pumps, Hoppers, Rolling Stock, Spare Parts and More Available Online @ www.hgpauction.com

To view a complete asset list,visit our website @ www.hgpauction.com

Live Public PreviewMonday & Tuesday, September 23rd & 24th, (9:00am - 4:00pm) Local Times.

ASSET ADVISORY & AUCTION SERVICES

ASSET ADVISORY & AUCTION SERVICES

ASSET ADVISORY & AUCTION SERVICES

SCISSOR LIFT1 – Upright MX19 Scissor Lift, Overall Length 5.7 ft. in 1750 mm, Overall Width 2.5 ft. in 760 mm, Height w/ Rails 7 ft. in 2130 mm, Platform Ground Clearance 3.7 in 95 mm, Max Platform Height 19 ft. in 5800 mm, Platform Width 28.3 in 720 mm, Platform Length 100 in 2540 mm

FORKLIFTS1 – Toyota 7FGCU25 Forklift, Propane, 4,050 lb. lifting capacity, 189” Lift Height1 – Toyota 75GU25 Forklift, Propane, 3750 Lifting Capacity, 189 Lift Height

AIR COMPRESSORS1 – Dayton 3Z966A 2-Stage Air Compressor (5-HP ; 14.5CFM ; 8-Gallon), With #3Z960 Pump.1 – Gardner-Denver Electra-Saver II Air Compressor with 50 HP Rotary Screw Intense Injection with Zek-therm E-Z Drain Air Drier and (2) Air Receiver Tanks: (1) 35.6 cu ft. capacity and (1) 240 Gallon Capacity with Oil and Water Separator1 – Powerex OTD1005C2 Air Compressor, 2010 HP, 3 PH, 460V

OFFICE EQUIPMENT FURNISHINGS1 – Conference Table, 4’ x 10’ to include (9) ChairsLot – Intertel 8520 Lot to include Assorted Telephones1 – Polycomm Soundstation 2 Telephone Conferencing System with (2) Microphones

SILOS1 – Discharge Station, Blend Silo with Steel Frame1 – Kice Steel Framing to include Silo and Control Valve1 – Mac 19AVRC14 Process Air-Vent Filter Receiver, Carbon Steel1 – Silo, Mild Steel, 12 ft. Diameter, 32 Ft Tall, Nom. Capacity 2410 Cu. Ft.2 – Silo, Mild Steel, 8 ft. Diameter, 51 ft. Tall, 1215 Cu. Ft. Cap

HOPPERSLot – (3) Steel Feed Hoppers with (3) Syntron SFV-SA Flow Control Valves and Steel Frame

BLOWERS4 – Regenerative Blower. [Fuji ; Model-VFC904A-7W , 20-HP ; 570CFM] 1 – Regenerative Blower Skid. [Lamson Turbotron Model-TBS-FF-RH-AIR Blower ; Westinghouse 40-HP/Frame-324TS AC Motor] KICE ROTARY AIR LOCK AND HIGH EFFICIENCY

CYCLONE COLLECTORSHOPPER WITH STEEL FRAME AND GATE VALVE

TOYOTA 75GU25 FORKLIFT , 3750 LIFTING CAPACITY, 189 LIFT HEIGHT

CARTER-DAY RELIANCE ARM-ROTATOR WASTE WATER MANAGEMENT SYSTEM

ASSORTED MACHINE TOOLS

MACHINE TOOLS1 – DoAll C-916 Horizontal, Metal-Cutting Bandsaw1 – DoAll M-L Vertical, Metal-Cutting Contour Bandsaw, s/n-5115366. (Table 24”x24” ; Throat 16” ; Maximum Saw Length 120 ; With Model-DBW-1A Welding Attachment)1 – Jet VBS-250 Vertical, Metal-Cutting Bandsaw, On Stand. (9” Throat ; 16”Lx14” Table ; With Welding Attachment)1 – LeBlond Engine Lathe -- Needs New Head Bearing. [Overall Footprint 115”Lx35”Wx64”H ; With Carriage ; 18” Swing ; 28”DBC ; Driving Pulley 500-RPM]. With 12” 3-Jaw Chuck ; 15” 4-Jaw Chuck]1 – Lincoln LN-25 (Code#0810B) Wire-Feed DC Arc Welder1 – Little Scotchman Industries 314 Dvorak 35-Ton Hydraulic Iron Worker, s/n-R13079. With 32-Piece Punch-Die Set On Rack1 – Omega Drill Press, s/n-159. (Pedestal-Type ; 16-Speed ; Cap 5/8”; 11”Diameter Table ; Overall Height 63”)1 – Rockwell/Delta Belt Sander/Grinder, s/n-BL-3672. (Belt Capacity 6”Wide)1 – Tree 2UVRC Vertical Knee Mill s/n-9035. (1-® HP ; Spindle Speeds 60 to 3300-RPM ; Geared Table Power Feed ; Table 48Llx28”W ; Also Includes Kurt AngLock 6”-Jaw Machine Vise)1 – Wilton Horizontal, Metal-Cutting Bandsaw

www.hgpauction.com

NORTH AMERICAN OFFICESAtlanta, Baltimore, Boca Raton, Dallas, Detroit, Los Angeles, San Diego, San Francisco, White Plains, TorontoGLOBAL OFFICESBarcelona, Dusseldorf, London

For complete Terms of Sale, visit our website at:

GLOBAL ONLINE AUCTIONStarting: September 24, 2013 - 7:00 am PDTEnding: September 25, 2013 - 9:00 am PDTAUCTION LOCATIONS500 W Ohio Ave Richmond, CA 94804AUCTION PREVIEWHeritage Global Partners will be hosting an open to the public preview and inspection on Septem-ber 23rd from 9:00am - 4:00pm.

AUCTIONEER’S NOTEHGP is pleased to be selected to conduct this Global Online Auction for MBA POLYMERS.This Online Auction features Process Lines, Extrusion Lines, Machine Tools, Spare Parts, Rolling Stock, Tanks, Facility Support, and Much More!Please view our website at www.hgpauction.com for the bidding instructions and the full terms of the sale. Thank you for your interest, and we look forward to providing you quality equipment sales and World Class Service.

AFFILIATIONS

GLOBAL HEADQUARTERSHacienda Del Mar12625 High Bluff DriveSan Diego, CA 92130Phone: (877) 303.8040 Fax: (866) 388.8595

Contact InformationDavid Barkoff, Tel: +1 650.649.0147Email: dbarkoff@hgpauction.com

ASSET ADVISORY & AUCTION SERVICES

FIRST CLASS MAILPOSTMASTER: Dated Material.Please Deliver Promptly.

Presorted First Class Mail

U.S. Postage PAID

San Diago, CAPermit No. 00

Complete Plant Closure On Behalf of:

KEY ASSETSCoperion 50MM Twin Screw Compounding Line. STS 50. (2006) Approximately 40:1 L/D. Gala Underwater Pelletizing Line. • 4,000 lb/hr Recycled Plastics Wash Line. Zerma Wet Granulator, 75kw drive. (7) Gala Spin Dryers 30-16. Sweco Vibratory Screeners. Agitated Tanks. Eriez Metal Separators. • Dry Granulation and Separation Line. Holzmag Single Rodader Shredder, 52”, 100hp. Entolater Granulator, 200hp. Rotex vibratory screener. (2) Kice Air Classifier. • BOY 50 M Injection Molding Machine • Gardner Denver Air Compressor • Gloucester Engineering Blender • Krebs Cyclone • CPU-MOD/T Waste Treatment System • Machine Tools • Rolling Stock • Spare Parts • and Much Much More!

ERIEZ N12-POLYMAG30-2/480 MAGNET SEPARATOR

Scan this QR Code with your smartphone for More Information.

BUYER’S PREMIUM: 15% cash buyers; 18% for credit card purchasers(Refer to Term 7 in the Auction Terms and Conditions for details)

In Conjunction with:Buying and Selling Process Equipment Made Easy!TM

www.aaronequipment.com

Complete Plant Closure On Behalf of MBA Polymers: A Leading Producer of Post-Consumer Recycled Plastics. Process Lines, Extrusion Lines, Machine Tools, Spare Parts, Rolling Stock, Tanks, Facility Support, and More!

WOULD YOU LIKE TO SELL AN ASSET?Simply call 1.650.207.0627 and speak with Kirk Dove, Managing Partner for more information. We will be glad to listen to your specific needs and from that HGP can prepare a detailed solution for your review that will maximize the returns for you’re assets for the company and It’s Shareholders.