Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Glide-Lock Siding Hanger
Installation System
Lightweight, Easy to Use, Proven Performance
Use With Insulated and Non Insulated Siding
PREVENT VINYL SIDING FROM WARPING & BUCKLING!
GLIDE-LOCK CREATES OVER 6 X MORE ATTACHMENT POINTS THAN STANDARD NAILS
STANDARD NAILS 3/8” nail head equals 4” of contact
“Straightening Out The World One Home At A Time”
4” HANGERS EQUAL 24” OF CONTACT
Glide-Lock Siding Hanger
Installation System
Vinyl siding may be easier to install than other products, but it still requires installers to follow stringent steps to guarantee a beautiful finished appearance (see page 2). One panel of vinyl siding can routinely expand and contract a 1/2” or more during normal, year-round changes in temperature. Even one nail driven too loose or too tight can cause the siding to buckle or warp, creating an imperfect appearance. In fact, installers are required to only allow approximately 1/32” clearance (the thickness of a dime) between the fastener head and the vinyl*. An average siding job requires about 2,000 nails, creating many opportunities for error, even for the best installation experts.
NEW GLIDE-LOCK SIDING HANGERS PREVENT VINYL FROM WARPING & BUCKLING
Glide-Lock Siding Hangers :
Allow siding to expand and contract freely, gliding like a train on a track
Eliminate the margin of error, creating a perfect installation every time
Prevent siding from warping or buckling due to imperfect installation
Warranted against siding blow offs in up to category 5 hurricane winds
Install quieter and faster than traditional nails
Provide more attachment points than traditional nails
Lifetime Warranty against warping, buckling and wind blow off
Made in the USA and ASTM tested
GLIDE-LOCK
FullBack®V Siding Insulation for Vinyl
Siding has been designed to be a very durable exterior cladding product, and the
improvements in manufacturing process including color fading over the past 8-10 years have
served to improve these premium vinyl siding products even more. There is 1 obvious
problem with vinyl siding: the hollow void between the siding and the wall.
This leaves vinyl susceptible to impact damage from a variety of sources
like hail, flying debris, lawnmower stone throw or the occasional baseball. Adding Fullback®V
siding insulation significantly improves impact resistance over ordinary vinyl siding, because the
foam acts as a shock absorber to dampen the blow, limit the amount of flex and support the
return to shape. “Progressive Foam Technologies” have performed a series of vigorous testing
both in-house, on homes in various neighborhoods and various geographical locations.
“IMPACT RESISTANCE SIDING”
APPEARANCE
Vinyl siding is America’s #1 choice in exterior cladding for many
reasons. It is available in a variety of colors, trim and profiles.
While vinyl siding has many options to make your home beautiful
and maintenance free, adding Fullback®V Insulation behind your
vinyl siding provides additional value and options that have never
been available before with ordinary vinyl siding.
NEW LEVEL OF ENERGY EFFICIENCY & NOISE REDUCTION
Adding Fullback®V Insulation to your siding can make your siding the most
energy-efficient siding on the market. With an R-value range of 2.0-3.5, it can
reduce your heating and cooling costs year round; “Keep the heat in and cold
out during the winter months and the cool in and heat out during the summer
months” and we’ve been told the insulation actually makes your home a lot
quieter keeping the outside noise outside… just to name a few -lawnmowers,
car traffic, barking dogs & aircraft.
Glide-Lock Siding Hanger
Installation System
Glide-Lock Mfg, Inc.
844-324-7559 www.GlideLock.com
Glide-Lock Siding Hanger Installation System with Fullback®V, is the hidden treasure behind your vinyl siding
Designed to fit over 98% of all vinyl siding on the market today
Designed For Use With Fullback®V,
Flat Insulation or No Insulation,
The Choice Is Yours!
Horizontal & Vertical Siding