Glass Properties · Porosity Catalog Abbreviation Nominal Maximum Pore Size (Microns) ... CRUCIBLE ... GOOCH

ChemScience Quality Commitment

Our TLG® Products are manufactured to the highest Standards available ensuring that we meet our Corporate Objective of supplying consistent top quality products in the most cost efficient manner possible, thus maintain the loyalty of our growing customer base.

Glass Properties

All TLG® glass products meet ASTM specification E438, Type 1, Class A “Standard Specification for glass in laboratory Apparatus”. This Borosilicate glass with Low linear coefficient of expansion is the ideal choice for fabricating laboratory glassware.

Annealing Point ............................................................... 560˚CLinear Coefficient of Expansion ................................ 32 x 10-7 /˚CSoftening Point .................................................................. 820˚C

Shipments

Unless otherwise instructed, we ship via UPS. Most of the items in this catalog are in stock and can be shipped promptly. If an order cannot be filled completely, a partial shipment will usually be made with balance being sent as soon as possible. If the complete order is to be a single shipment, it should be specified on your purchase order.

Trade Marks

All Trademarks refered to herein are the property of their respective owners.

Pricing

Prices shown are in Canadian Dollars other then where specified and subject to change without notice.

Damage, Breakage or Shortage

Shipper should immdiately be made aware by recipient of any damage or loss incurred on any shipment. Recipient should keep all packing material from damaged shipment.

Returns

Returns to be effected only on express request of ChemScience.

Warranty

ChemScience will replace any product found to be defective or not in conformance with published specifications. ChemScience makes no warranty, expressed or implied, as to the suitability of any merchandise for any specific use and shall not be held liable for any direct or indirect loss resulting from the use of this merchandise nor for consequential damages.

Restocking Charge

Catalog items returned due to an error in ordering are subject to a 15% restocking fee.

Representations

Products in this Catalogue are based on current listings. ChemScience has reserved the rights to improve or modify any individual product specification when such a change is warranted.

Special Glassware

ChemScience has the capabilities to custom designing and fabricating unique scientific glassware according to specifications and/or drawings supplied by customers.

GENERAL INSTRUCTIONS

Terms

Terms are NET 30 Days, F.O.B. point of shipment or by any major creditcard unless otherwise stated in quotation. Applicable sales taxes will be applied at time of Invoicing.

Fritted Products

ChemScience supplies three different porosities

Porosity Catalog Abbreviation

Nominal Maximum Pore Size (Microns) Principal Uses

Coarse C 40-60Filtration of coarse materials. Gas dispersion,

gas washing, gas absorption. Mercury filtration. Extraction apparatus.

Medium M 10-15Filtration of Crystalline Precipitates. Extraction apparatus. Removal of “floaters” from distilled

water.

Fine F 4-5.5 Filtration of fine precipitates. Mercury valve. Extraction apparatus.

9511, Cote de liesse, Dorval, Quebec, Canada, H9P 2N9 Telephone :(514)-636-7850 Toll Free No :1-877-998-9910 Fax :(514)-636-9980 E-mail :[email protected] :[email protected] Website :www.chemscience.com

(A Division of SATI International Scientific Inc)Lab Glassware you Trust

GENERAL INSTRUCTIONS

CONTENTSADAPTER ............................................................................................................................................................................. 6

CONNECTING ��6THERMOMETER OR INLET ��10INLET ��11VACUUM ��14DISTILLATION ��16FLOW CONTROL ��21FLUSHING ��23DRYING TUBE ��25BUBBLER ��26AIRFREE SCHLENk ��27

ARSINE GENERATOR .........................................................................................................................................................28BEAKERS ............................................................................................................................................................................ 30BOTTLES ............................................................................................................................................................................ 32BURETTES .......................................................................................................................................................................... 37CHROMATOGRAPHY .........................................................................................................................................................38COLD TEST ......................................................................................................................................................................... 54COLUMN PACKING MATERAIL .........................................................................................................................................55COLUMN, DISTILLATION...................................................................................................................................................56CONDENSER ...................................................................................................................................................................... 57CRUCIBLE ........................................................................................................................................................................... 64

pORCELAIN-HIGH FORM ��64pORCELAIN-LOW(WIDE) FORM ��65FUSED qUARTz-OpAqUE ��66FUSED qUARTz-CLEAR ��67GOOCH ��68

CYLINDERS ......................................................................................................................................................................... 69DISH - DISTILLATION .........................................................................................................................................................75DISTILLATION ....................................................................................................................................................................77

RECEIVER ��77HEAD ��80AppARATUS ��82

EVAPORATION APPARATUS..............................................................................................................................................88EXTRACTOR, SOXHLET ......................................................................................................................................................91FILTRATION APPARATUS...................................................................................................................................................92FILTER PRODUCTS .............................................................................................................................................................98

SYRINGE FILTERS ��98MEMBRANE FILTERS ��105

FLASK .............................................................................................................................................................................. 107ROUND BOTTOM��107FLAT BOTTOM ��114ERLENMEYER-STOppER TOp & SCREW TOp ��115IODINE ��117pEAR SHApE ��118kjELDAHL ��120RECOVERY ��121FILTERING/VACUUM ��122DISTILLATION ��123SCHLENk TUBE ��124VOLUMETRIC ��131

FUNNEL........................................................................................................................................................................... 134FILTER/FILTRATION TUBE ��134pOWDER ��136FILTER ��137pRESSURE EqUALIzING ��139SEpARATORY ��141BUCHNER ��144

GAS DISPERSION TUBE .................................................................................................................................................. 148MANIFOLD ...................................................................................................................................................................... 150

VACUUM/INERT GAS, DOUBLE ��150VACUUM/INERT GAS, ALL GLASS ��153HIGH VACUUM SOLID GLASS STOpCOCk ��157VACUUM, TEFLON® STOpCOCk ��161HIGH VACUUM VALVES ��163NITROGEN/ARGON LINE, TEFLON® ��165

Table Of Contents

VACUUM, SINGLE BODY ��167DOUBLE ��168WITH #15 - O RINGS ��170ACCESSORIES ��171

METAL & PLASTIC ACCESSORIES .................................................................................................................................. 172MICROSCOPE COVER GLASS ......................................................................................................................................... 188MICROSCOPE SLIDES ..................................................................................................................................................... 192PEPTIDE SYNTHESIS VESSEL ......................................................................................................................................... 196PIPETTES ......................................................................................................................................................................... 198PIPETTORS ...................................................................................................................................................................... 200PRESSURE VESSEL .......................................................................................................................................................... 201SOLVENT STILL ............................................................................................................................................................... 202STIRRING RODS .............................................................................................................................................................. 204STOPPER ......................................................................................................................................................................... 205STOPCOCK ...................................................................................................................................................................... 208

TEFLON® ��208GLASS ��209

SUBLIMATOR .................................................................................................................................................................. 211TRAP, VACUUM .............................................................................................................................................................. 213TUBE CONNECTING ....................................................................................................................................................... 217VALVE, HIGH VACUUM .................................................................................................................................................. 218

pTFE ��218TEFLON® pROTECTED ��220

VIALAS & CLOSURES ...................................................................................................................................................... 222WATCH GLASS ................................................................................................................................................................ 226

1.Adapter, BushingBushing adapters allow for compact assemblies of dissimilar joints.

Cat no. Top outer Joints

Bottom Inner Joints Pack Type Price/Each

(CAD) CS-A0791419 14/20 19/22 Each $24.02

CS-A0793524 14/35 24/40 Each $28.53

CS-A0791924 19/38 24/40 Each $30.90

2.Adapter, ReducingWith joints at top and bottom.

Cat no. Top outer Joints

Bottom Inner Joints Pack Type Price/Each

(CAD) CS-A0201419 14/20 19/22 Each $21.45

CS-A0201424 14/20 24/40 Each $24.54

CS-A0201924 19/22 24/40 Each $25.79

CS-A0201929 19/22 29/42 Each $29.33

CS-A0202429 24/40 29/42 Each $29.04

3.Adapter, EnlargingWith joints at top and bottom.

Cat no. Top Joints

Bottom Joints Pack Type Price/Each

(CAD) CS-A0251914 19/22 14/20 Each $23.96

CS-A0252414 24/40 14/20 Each $25.45

CS-A0252419 24/40 19/22 Each $25.90

CS-A0252924 29/42 24/40 Each $30.28

ADAPTER

Please ask for any specific joints not listed here.



CONNECTING

ChemScience www.chemscience.com Toll Free:1-877-998-9910 6

4.Adapter, Connecting Four ArmDesigned with four arms for the removal of solids and for easy access to samples.

Cat no. Joints Pack Type Price/Each (CAD)

CS-A0421420 14/20 Each $62.96

CS-A0422440 24/40 Each $71.92


ChemScience www.chemscience.com Toll Free:1-877-998-9910

5.Adapter, ConnectingUsed to expand the length of apparatus. Adapter can also be used as an air condenser (With standard taper top outer joint and lower inner joint).

6.Adapter, With Spherical SocketWith top spherical socket joint and lower standard taper inner joint.

7.Adapter, With Spherical (Ball) JointWith top standard taper outer joint and lower spherical ball joint.

ADAPTER

Cat no. Joints Length Between Joints (mm) Pack Type Price/Each

(CAD) CS-A0801030 14/20 30 Each $20.37

CS-A0801090 14/20 90 Each $21.94

CS-A0809030 19/22 30 Each $27.20

CS-A0809100 19/22 55 Each $28.55

CS-A0809090 19/22 90 Each $29.54

CS-A0804030 24/40 30 Each $27.20

CS-A0804070 24/40 70 Each $27.87

CS-A0804120 24/40 120 Each $31.23

CS-A0804175 24/40 175 Each $32.46

Cat no. Top Joints Bottom Joints Pack Type Price/Each (CAD)

CS-A0663514 35/20 14/20 Each $29.54

CS-A0663519 35/20 19/22 Each $30.54

CS-A0663524 35/20 24/40 Each $33.69

CS-A0663529 35/20 29/42 Each $36.53

CatNo. Top Joints Bottom Joints Pack Type Price/Each (CAD)

CS-A0671435 14/20 35/20 Each $29.54

CS-A0671935 19/22 35/20 Each $30.54

CS-A0672435 24/40 35/20 Each $35.91

CS-A0672935 29/42 35/20 Each $36.53




CONNECTING

ChemScience www.chemscience.com Toll Free:1-877-998-9910 7

8.Adapter, Connecting, Two Outer JointsWith standard taper outer joints at both ends.

9.Adapter, Connecting, Two Inner JointsWith standard taper inner joints at both ends.

ADAPTERCONNECTING


(CAD) CS-A0821030 14/20 30 Each $28.16

CS-A0821090 14/20 90 Each $29.16

CS-A0829030 19/22 30 Each $31.91

CS-A0829090 19/22 90 Each $34.48

CS-A0824030 24/40 30 Each $36.95

CS-A0824070 24/40 70 Each $36.95

CS-A0824120 24/40 120 Each $36.95

CS-A0824175 24/40 175 Each $36.95


(CAD)

CS-A0811030 14/20 30 Each $27.16

CS-A0811090 14/20 90 Each $28.16

CS-A0819030 19/22 30 Each $30.91

CS-A0819090 19/22 90 Each $31.91

CS-A0814030 24/40 30 Each $35.82

CS-A0814070 24/40 70 Each $35.82

CS-A0814120 24/40 120 Each $35.82

CS-A0814175 24/40 175 Each $37.15



8ChemScience www.chemscience.com Toll Free:1-877-998-9910

10.Adapter, One Socket, Two Cone, ConnectingThree-arm design for the assembly of three vessels.

11.Adapter, Two Socket, One Cone, ConnectingThree-arm design for the assembly of three vessels.

12.Adapter, U-Shape

ADAPTERCONNECTING


CS-A0101420 14/20 Each $58.77

CS-A0101922 19/22 Each $59.89

CS-A0102440 24/40 Each $62.80


CS-A0331420 14/20 Each $60.62

CS-A0331922 19/22 Each $64.42

CS-A0332440 24/40 Each $66.55

Cat no. Joint Pack Type Price/Each (CAD)

CS-A0631420 14/20 Each $23.00

CS-A0631922 19/22 Each $24.50

CS-A0632440 24/40 Each $27.00




13.Adapter, Connecting InletAdapter has a #15 O-ring joint with a 0-4mm high vacuum valve at a 90° angle connected to a piece of 10mm O.D. medium wall tubing. Overall height is 100mm. Each adapter is supplied complete with one #116 Viton® O-ring.

Cat no. Description Pack Type Price/Each (CAD)

CS-A0560001 Adapter, 90°, with #15 O-ring joint Each $82.08

9 ChemScience www.chemscience.com Toll Free:1-877-998-9910

14.Adapter, Thermometer, Inlet, With Rubber FittingFor use with gas inlet tubes or plain stem thermometers. Supplied with one hole rubber adapter.

17.Adapter, Inlet with Hose ConnectionWith a serrated hose connection for vacuum or for the introduction of gases. The thread at the top is for a vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5 and 7.5mm. Serrated hose connection has an O.D. of 8mm at the largest serration. Supplied complete with a Nylon cap and Viton® o-ring.

15.Adapter, Inlet or ThermometerWith a compression cap and Viton® O-ring to form a vacuum tight seal. To use it as a syringe port, simply replace with O-ring with Teflon®-lined septum. Cap accommodates 5.0-7.5mm O.D. thermometer. Supplied with one Nylon® cap and one Viton® O-ring.

16.Adapter, Thermometer (Cone Joint)With 10/30 thermometer joint, angled for use in multiple neck flask.

ADAPTERTHERMOMETER OR INLET


CS-A0451420 14/20 Each $14.26

CS-A0451922 19/22 Each $14.84

CS-A0452440 24/40 Each $22.37

Catalogue No. Joints Pack Type Price/Each (CAD)

CS-A0521420 14/20 Each $22.95

CS-A0521922 19/22 Each $24.07

CS-A0522440 24/40 Each $23.51


CS-A0162440 24/40 Each $56.13


CS-A0531420 14/20 Each $45.00

CS-A0531922 19/22 Each $46.00

CS-A0532440 24/40 Each $48.00






18.Adapter, Inlet, 90°, With Cone JointWith hose connection on the side and male (Cone) joint.

19.Adapter, Inlet (Straight), With Cone JointWith hose connection on the top and male (Cone) joint.

ADAPTERINLET

Cat no. Joints Hose O.D. (mm) Pack Type Price/Each (CAD)

CS-A0291420 14/20 8 Each $22.00

CS-A0291922 19/22 8 Each $23.00

CS-A0292440 24/40 8 Each $25.00


CS-A0301420 14/20 8 Each $21.00

CS-A0301922 19/22 8 Each $22.00

CS-A0302440 24/40 8 Each $23.00




20.Adapter, Twin Connecting HoseAdapter has two hose connections 180° from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10 mm at the largest serration.


CS-A0341420 14/20 8 Each $21.80

CS-A0341922 19/22 8 Each $23.68

CS-A0342440 24/40 8 Each $24.90

21.Adapter, Inlet, Long StemWith standard taper top outer and lower inner joints with sealed-in lower tube extending below inner joint.

Cat no. Joints Tube Length Below Joint (mm) Pack Type Price/Each

(CAD)CS-A0651420 14/20 100 Each $36.72

CS-A0651922 19/22 100 Each $38.89

CS-A0652440 24/40 200 Each $49.14



22.Adapter, Inlet 90°, Outer Joint (Socket Joint)With hose connection on the top.

23.Adapter, Inlet (Straight), With Frit DiscWith an extra coarse disc to prevent solids from being introduced into reaction system. Hose connection is 8mm. O.D.

24.Adapter, Inlet (Straight), Outer Joint (Socket Joint)Ideal for use as a vent or for the introduction of pressure/vacuum.

25.Adapter, Inlet, With Hose & Tube Connections

(Cone Joint)

ADAPTERINLET


CS-A0951420 14/20 8 Each $23.06

CS-A0951922 19/22 8 Each $23.56

CS-A0952440 24/40 8 Each $24.06

Cat no. Joints Height (mm) Pack Type Price/Each (CAD)

CS-A0831420 14/20 65 Each $29.78

CS-A0831922 19/22 67 Each $30.71

CS-A0832440 24/40 95 Each $29.78


CS-A0321420 14/20 8 Each $22.10

CS-A0321922 19/22 8 Each $23.01

CS-A0322440 24/40 8 Each $23.98

Cat no. Joints Hose O.D (mm)

Tube Length (mm) Pack Type Price/Each

(CAD)CS-A0314075 24/40 8 75 Each $33.98

CS-A0314250 24/40 8 250 Each $37.80






ADAPTERINLET


26.Adapter,Ground Joint, Reduced Diameter, Extended, Drip TubeInner joint with a sealed on lower tube extending 6”below the grind, having the same O.D. tubing on both ends of the grind.

27.Adapter, Full length, Sealed Tube, Inner Part Only, Interchangeble Joint.Inner joint with a sealed on lower tub extending 6”below the grind, having the same O.D. tubing on both ends of the grind.

28.Adapters, Inlet, Straight, Hose ConnectionWith serrated hose connection having an O.D. of 10mm at the largest serration sealed between the top outer and lower inner standard taper joints.

Cat no. Joint Length below Joint (mm)

Tubing O.D. (mm) Pack Type Price/Each

(CAD)CS-A0501420 14/20 150 8 Each $26.10

CS-A0501922 19/22 150 10 Each $29.20

CS-A0502440 24/40 150 12 Each $31.50

Cat no. JointApprox(Top) Stem O.D X

Length (mm)

Approx (Bottom)

Stem O.D X Length (mm)

Pack Type Price/Each (CAD)

CS-A050G1030 10/30 8 x 150 5 x 115 Each $39.37

CS-A050G1435 14/35 12 x 170 8 x 115 Each $39.37

CS-A050G1938 19/38 17 x 150 10 x 115 Each $39.37

CS-A050G2440 24/40 22 x 170 12 x 115 Each $51.79


CS-A0011420 14/20 10 Each $62.10

CS-A0011922 19/22 10 Each $64.80

CS-A0012440 24/40 10 Each $66.61


29.Adapter, Vacuum Take-off, Long Stem, 105°With a hose connection and a drip tip. Lower tube is extended to 200mm.

30.Adapter, Vacuum Take-off, Short Stem, BendWith a hose connection and a drip tip.

32.Adapter, Vacuum FiltrationUsed with plain stem Buchner funnels and pluro-stopper. Hose connection has an O.D. of 10mm at the largest serration.

ADAPTERVACUUM

Cat no. Joints Tube Length Below Joint (mm) Pack Type Price/Each

(CAD)CS-A0641420 14/20 100 Each $39.40

CS-A0641922 19/22 100 Each $40.41

CS-A0642440 24/40 200 Each $44.22

Cat no. Top Joint Bottom Joint Pack Type Price/Each (CAD)

CS-A0621420 14/20 14/20 Each $39.71

CS-A0621419 14/20 19/22 Each $41.39

CS-A0621922 19/22 19/22 Each $41.88

CS-A0621924 19/22 24/40 Each $45.35

CS-A0622440 24/40 24/40 Each $46.22

Cat no. Lower Joint Pluro- Stopper Size

Fits Funnels Capacity

(mL)

Pack Type

Price/Each (CAD)

CS-A0841420 14/20 #1 2 to 30 Each $35.60

CS-A0841922 19/22 #1 2 to 30 Each $40.19

CS-A0842415 24/40 #3 15 to 150 Each $50.04

CS-A0842440 24/40 #5 or 6 350 to 3000 Each $50.82




14


31.Adapter, Inlet With Hose Connection, StraightWith vacuum take-off and drip tip.

Cat no. Socket Joint Cone Joint Hose O.D. (mm) Pack Type Price/Each

(CAD)CS-A0431420 14/20 14/20 8 Each $35.71

CS-A0431421 14/20 19/22 8 Each $36.41

CS-A0431922 19/22 19/22 8 Each $36.49

CS-A0431924 19/22 24/40 8 Each $45.75

CS-A0432440 24/40 24/40 10 Each $47.35


34.Adapter, Vacuum DistillingDistance between joints is 100mm. Useful in the sub-boiling separation of mixtures having volatile components.


CS-A0491420 14/20 8 Each $65.49


ADAPTERVACUUM


33.Adapter, Vacuum/Gas, Ball JointWith 35/20 ball joint and 8mm Hose connection.


CS-A0293520 35/20 Each $24.06


35.Adapter, Distillation, Bent 105 °Also used as rotary evaporator washer.

36.Adapter, Distillation, Receiving Short StemWith an outer joint at top. Tapered drip tube extends into open receivers.

37.Adapter, Distillation, Receiving Long StemWith an outer joint at top. Tapered drip tube extends into open receivers.

ADAPTERDISTILLATION

Cat no. Socket Size Cone Size Pack Type Price/Each (CAD)

CS-A0411420 14/20 14/20 Each $28.66

CS-A0411419 14/20 19/22 Each $31.11

CS-A0411922 19/22 19/22 Each $30.10

CS-A0411924 19/22 24/40 Each $32.72

CS-A0412440 24/40 24/40 Each $31.46

Cat no. Joints Approx. Length (mm) Pack Type Price/Each

(CAD)

CS-A0961420 14/20 65 Each $34.28

CS-A0961922 19/22 65 Each $35.10

CS-A0962440 24/40 65 Each $41.30

Cat no. Joints Approx. Length (mm) Pack Type Price/Each

(CAD)019.202.05 14/20 190 Each $40.10

019.202.06 19/22 225 Each $42.10

019.202.07 24/40 200 Each $44.28





38.Adapter, Distilling, Bent, 105°With an inner drip joint at the bottom and an outer joint at the top.


CS-A0891420 14/20 Each $40.89

CS-A0891922 19/22 Each $41.80

CS-A0892440 24/40 Each $43.90


39.Adapter, Distillation Connecting, Still Head Plain With Thermometer SocketFor use as a component in atmospheric or vacuum distillations.

40.Adapter, Distilling, 75°With compression cap and Viton® O-ring for forming a vacuum tight seal of plain thermometer.

41.Adapter, Distillation Head, JacketedVacuum jacketed. The 10/18 top joint accommodates a 76mm immersion thermometer.

ADAPTERDISTILLATION

Cat no. Top Joint Bottom Joint Side Joint Pack Type Price/Each (CAD)

CS-A0351420 14/20 14/20 14/20 Each $39.90

CS-A0351922 19/22 19/22 19/22 Each $41.93

CS-A0352440 24/40 24/40 24/40 Each $44.51

CS-A0351419 14/20 19/22 19/22 Each $46.90

CS-A0351424 14/20 24/40 24/40 Each $48.90

CS-A0354914 14/20 24/40 19/22 Each $52.90

CS-A0351924 19/22 24/40 24/40 Each $55.90

Cat no. Top Joints Height x Width (mm) Pack Type Price/Each

(CAD)CS-A0971420 14/20 85 x 50 Each $41.90

CS-A0971922 19/22 95 x 65 Each $44.90

CS-A0972440 24/40 155 x 100 Each $55.30





Cat no. Top Joint Other Joints Pack Type Price/Each (CAD)

CS-A0542440 10/18 24/40 Each $254.11

42.Adapter, Distillation Connecting, VigreuxAccommodate a 76mm immersion thermometer.

Cat no. Top Joint Other Joints Side Joint Pack Type Price/Each (CAD)

CS-A0131024 10/18 24/40 24/40 Each $67.30


43.Adapter, Distillation, With Threaded Thermometer

PortWith threaded thermometer port, supplied complete with Nylon® cap (CS-RC009) and Viton® O-ring to (CS-R010) accommodate 6-7.5mm O.D. plain thermometer.

44.Adapter, Distillation, With Thermometer JointWith a 10/18 joint on the vertical side tube for 76mm thermometer immersion.

45.Adapter, Recovery Bend, 75°With inner joints at each end.

ADAPTERDISTILLATION


CS-A0901420 14/20 Each $74.66

CS-A0901922 19/22 Each $76.65

CS-A0902440 24/40 Each $82.84

Cat no. All Joints Thermometer Joint Pack Type Price/Each

(CAD)CS-A0361410 14/20 10/18 Each $68.51

CS-A0361910 19/22 10/18 Each $71.20

CS-A0362410 24/40 10/18 Each $80.82


CS-A0151420 14/20 Each $36.90

CS-A0151922 19/22 Each $39.90

CS-A0152440 24/40 Each $43.90





46.Receiver Adapters, Straight

Cat no. Socket Size Pack Type Price/Each (CAD)

020.202.01 14/20 Each $49.90

020.202.02 19/22 Each $51.30

020.202.03 24/40 Each $58.90


ADAPTERDISTILLATION





47.Adapter, Direct DripJoints with curved drip tube.

Cat no. Joints Overall Height (mm) Pack Type Price/Each

(CAD)CS-A0141420 14/20 90 Each $42.40

CS-A0141922 19/22 90 Each $47.39

CS-A0142440 24/40 90 Each $52.44

48.Adapter, Kjeldahl TrapDistance between center of joints is approximate 200mm.


CS-A0171420 14/20 Each $97.28

CS-A0171922 19/22 Each $98.88

CS-A0172440 24/40 Each $99.77

49.Adapter, Claisen, Dual EntryProvides dual entry into a variety of flasks.

50.Adapter, Pour OutFor easy pouring from flasks.


CS-A0221420 14/20 Each $20.90

CS-A0221922 19/22 Each $21.90

CS-A0222440 24/40 Each $23.90

19

Cat no. Socket Joint Cone Joint Pack Type Price/Each (CAD)

CS-A0371420 14/20 14/20 Each $45.88

CS-A0371922 19/22 19/22 Each $46.79

CS-A0372440 24/40 24/40 Each $53.06


ADAPTERDISTILLATION

Cat no. Socket Joint Cone Joint Pack Type Price/Each (CAD)

017.202.01 14/20 14/20 Each $78.24

017.202.02 14/20 24/40 Each $80.70

017.202.03 19/22 19/22 Each $80.70

017.202.04 19/22 24/40 Each $84.74

017.202.05 24/40 24/40 Each $87.86

Cat no. Cone Size to Fit Flask

Cone Size to Fit Condenser Pack Type Price/Each

(CAD)033.202.01 24/40 19/22 Each $83.90

033.202.02 24/40 24/40 Each $88.90



51.Adapter, Claisen, Three-Inlet TypeThree-inlet type for multiple entries into a single neck flask. One side joint is at a 45° angle.

52.Steam Distillation Heads


ADAPTERFLOW CONTROL




53.Adapter, Flow Control, PTFE Stopcock 90°, Inner Joint (Cone Joint)Used to regulate the flow of gases or liquids into reaction systems. Teflon® stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration. With standard taper inner joint.


CS-A0381420 14/20 Each $56.90

CS-A0381922 19/22 Each $58.87

CS-A0382440 24/40 Each $64.90

54.Adapter, Flow Control (Straight), PTFE Stopcock,

Inner Joint (Cone Joint)Used to regulate the flow of gases or liquids into reaction systems. Teflon® stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration. With standard taper inner joint.

Cat no. Joints Stopcock Bore (mm) Pack Type Price/Each

(CAD)CS-A0701420 14/20 2 Each $55.90

CS-A0701922 19/22 2 Each $57.30

CS-A0702440 24/40 2 Each $62.10

55.Adapter, Flow Control (Straight), PTFE Stopcock, 90°, Outer Joint (Socket Joint)For regulating the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration. With standard taper outer joint.


(CAD)CS-A0711420 14/20 2 Each $58.90

CS-A0711922 19/22 2 Each $61.48

CS-A0712440 24/40 2 Each $65.30



(CAD)CS-A0721420 14/20 2 Each $76.90

CS-A0721922 19/22 2 Each $82.30

CS-A0722440 24/40 2 Each $83.78


56.Adapter, Flow Control, Metering Stopcock, 90°

(Cone Joint)Provides on/off control with the main valve. Allows delivery of preset volumes of gases or liquids to reactions using the needle valve.

22

ADAPTERFLOW CONTROL


ADAPTERFLUSHING





57.Adapter, Flushing (Vertical), Cone jointWhile sampling directly through the bore of the T-bore Teflon® stopcock, vessels can be flushed with inert gas. 10mm OD stems for use with septum stopper.


CS-A0681420 14/20 Each $87.31

CS-A0681922 19/22 Each $88.11

CS-A0682440 24/40 Each $89.45

58.Adapter, Flushing (Horizontal), Cone JointWith 2mm T-bore PTFE stopcock having constant pressure retention device or 2mm T-bore 1:5 taper Teflon® plug.

Cat no. Joints Stopcock Type Pack Type Price/Each (CAD)

CS-A0881420 14/20 Teflon® Each $86.98

CS-A0881922 19/22 Teflon® Each $88.11

CS-A0882440 24/40 Teflon® Each $90.22

59.Adapter, Flushing, Top Socket & Lower Cone JointWith 2mm T-bore PTFE stopcock.


CS-A0761420 14/20 Each $74.05

CS-A0761922 19/22 Each $79.03

CS-A0762440 24/40 Each $82.03

60.Adapter, VacuumWith 2mm straight-bore, PTFE stopcock.

Cat no. Joints Stopcock Type Pack Type Price/Each (CAD)

CS-A0741420 14/20 Teflon® Each $74.05

CS-A0741922 19/22 Teflon® Each $79.03

CS-A0742440 24/40 Teflon® Each $82.03


ADAPTERFLUSHING


61.Adapter, Vacuum TransferWith 2mm Teflon® stopcock. For transfer of sensitive and hazardous solutions.


CS-A0121420 14/20 Each $94.90

CS-A0121922 19/22 Each $96.90

CS-A0122440 24/40 Each $97.30


ADAPTERDRYING TUBE




62.Adapter, Drying Tube, “U” ShapedWith cone joint, cotton is usually used to contain drying agent.


CS-A0851420 14/20 Each $37.30

CS-A0851922 19/22 Each $39.90

CS-A0852440 24/40 Each $45.90

63.Adapter, Drying Tube, StraightWith top (Socket) and bottom (Cone) joints.


CS-A0861420 14/20 Each $39.90

CS-A0861922 19/22 Each $40.90

CS-A0862440 24/40 Each $46.90

64.Adapter, Drying Tube, 75°Angled at 75° to avoid desiccant contact with reactions.


CS-A0871420 14/20 Each $37.90

CS-A0871922 19/22 Each $40.10

CS-A0872440 24/40 Each $46.10


65.Adapter, Bubbler, Air Free, SchlenkWith 10mm O.D. hose connection.

66.Adapter, With Mineral Oil BubblerWith 10mm O.D. hose connection.

ADAPTERBUBBLER

Cat no. Body O.D. (mm) Overall Height x Width (mm) Pack Type Price/Each

(CAD)CS-B0257040 26 185 x 80 Each $42.30

CS-B0257040L 26 500 x 80 Each $75.90


CS-A0402440 24/40 Each $122.02

CS-A0401922 19/22 Each $125.14

CS-A0402942 29/42 Each $127.61




ADAPTERAIRFREE SCHLENK

27

67.Adapter, Transfer Valve, Airfree, SchlenkThe 0-4mm high vacuum valves have two Viton® O-rings on the shaft and an integral PTFE O-ring on the tip.

68.Adapter, ConnectingWith 2mm Teflon® stopcock converts standard vessels to airless applications.

Cat no. Joints Overall Height x Width (mm) Pack Type Price/Each

(CAD)CS-A0391420 14/20 150 x 75 Each $133.70

CS-A0391922 19/22 160 x 75 Each $134.53

CS-A0392440 24/40 180 x 75 Each $137.55


CS-A0191414 14/20 Each $74.05

CS-A0191919 19/22 Each $79.03

CS-A0192424 24/40 Each $82.03




ARSINE GENERATOR

28

69.Arsine Generator - USP TypeDesigned for arsenic determiniation by the silver diethyldithiocarbramate photometric method. Meets A.P.H.A. standard 104A, ACS/USP and EPA specifications. Fabricated from borosilicate glass. Joint in 125 mL & 250 mL and ball and socket joint between absorber and scrubber is 12/2. Complete unit includes clamp.

70.Arsine Generator-USP Type (Improved Version)This unit requires less space and set-up time, and is easier to clean. The lead acetate-impregnated glass wool is inserted the 24/40 joint. Glass beads may be added to the absorber tube to enhance the mixing of the generated gas through the silver diethyldithiocarbamate. Supplied with one polyacetal clamp.


CS-A0029150 Arsine Generator complete with 125mL flask and 24/40 joint Each $184.90


CS-A0015250A Absrorber Only Each $49.90

CS-A0015250S Scrubber Only Each $55.90

CS-C0S610-12 Pinch Clamp #12 Each $22.80




CS-A015250T Scrubber Only/Absorption Tube Each $139.90

CS-CC0210-24 Conical Head Clip, Plastic, 24 size Each $4.20

71.Arsine Generator - European Pharmacopeia


CS-A000125 Set with 125mL Flask Each $219.88

CS-A000250 Set with 250mL Flask Each $237.38


ARSINE GENERATOR


72.Arsenic Limit Test - As Per Japanese Pharmacopeia


CS-JP00001 Arsenic Limit Test complete apparatus as per JP XIV Each $710.90

BEAKERS

30

73.Heavy Duty, Graduated BeakerAdded strength for washing operations etc. The 250mL to 4000mL sizes are marked with a double graduated metric scale. All sizes have an extra large marking spot.

Cat no. Capacity (mL)

Graduation Range (mL)

Approx. O.D. x Height

(mm)

Graduation Interval

Qty/pk.

Qty/Cs.

Price/Pack (CAD)

229.203.07 250 25-200 68 x 90 25 12 48 $98.16

229.203.08 400 25-325 77 x 110 25 12 48 $127.80

229.203.10 600 50-500 90 x 124 50 6 36 $75.00

229.203.11 1000 50-1000 108 x 156 50 6 24 $141.90

229.203.12 2000 200-1800 131 x 180 200 4 8 $195.92

229.203.14 4000 500-3500 160 x 250 250 1 6 $91.10

229.203.16 10000 1000-9000 230 x 340 1000 1 2 $560.90


BEAKERS

74.Standard Wall, Griffin Low Form, Double Scale, GraduatedBeaker, with spout, manufactured with uniform wall thickness. The 250mL to 2000mL sizes are marked with a double graduated metric scale. All sizes have an extra large marking spot. The 10mL size is not graduated.


Graduation Range (mL)

Approx. O.D. x Height

(mm)

Graduation Interval

Qty/pk.

Qty/Cs.

Price/Pack(CAD)

229.202.02 10 — 25 x 32 — 12 48 $61.08

229.202.02A 20 5-15 32 x 40 5 12 48 $53.64

229.202.03A 30 5-25 35 x 53 10 12 48 $49.80

229.202.04 50 10-40 42 x 56 10 12 48 $51.00

229.202.05 100 20-80 50 x 72 10 12 48 $54.60

229.202.06 150 20-140 57 x 86 10 12 48 $55.20

229.202.07 250 25-200 68 x 90 25 12 48 $55.32

229.202.08 400 25-325 77 x 110 25 12 48 $63.84

229.202.10 600 50-500 90 x 124 50 6 36 $39.84

229.202.11 1000 50-1000 108 x 158 50 6 24 $71.88

229.202.12 2000 200-2000 131 x 193 100 4 8 $99.48


BOTTLES

77.Bottles Reagent, Narrow Mouth, Clear GlassManufactured from Borosilicate 3.3 glass with standard ground joint & hollow glass stopper.

75.Weighing Bottles, Low Form, Short Length Joint

76.Weighing Bottles, Tall Form, Short Length Joint

Cat no. O.D. x Height (mm) Description Capacity

(ml) Pack Type Price/Pack (CAD)

264.202.01 40 x 30 Low Form 20 10 $379.80

264.202.02 50 x 25 Low Form 20 10 $423.00

264.202.03 50 x 35 Low Form 35 10 $449.00

264.202.04 50 x 50 Low Form 50 10 $489.00

264.202.05 60 x 30 Low Form 40 10 $481.00

Cat no. O.D. x Height (mm) Description Capacity

(ml) Pack Type Price/Pack (CAD)

264.202.06 20 x 40 Tall Form 5 10 $313.00

264.202.07 25 x 50 Tall Form 16 10 $320.00

264.202.08 30 x 60 Tall Form 25 10 $389.00

264.202.09 40 x 80 Tall Form 60 10 $489.00

Cat no. Capacity(ml) Pack Type Price/Pack (CAD)

272.232.02A 50 6 $67.26

272.232.03 100 6 $67.26

272.232.04 250 6 $74.10

272.232.05 500 6 $88.56

272.232.06 1000 1 $17.95

272.232.07 2000 1 $41.69



273.232.02A 50 6 $162.00

273.232.03 100 6 $173.64

273.232.04 250 6 $264.54

273.232.05 500 6 $322.92

273.232.06 1000 1 $62.40

273.232.07 2000 1 $90.37

79.Glass Media/Storage Bottles, ClearWith Autoclavable Screw Cap & Pouring Ring - GL45 - Clear Glass.

80.Glass Media/Storage Bottles, AmberWith Autoclavable Screw Cap & Pouring Ring - GL45 - Amber Glass.

78.Bottles Reagent, Narrow Mouth, Amber GlassManufactured from Borosilicate 3.3 glass with standard ground joint and hollow glass stopper.


274.202.01 100 10 $112.10

274.202.02 250 10 $123.50

274.202.03 500 10 $147.60

274.202.04 1000 10 $179.50

274.202.05 2000 10 $416.88

Cat no. Capacity (ml) Pack Type Price/Pack (CAD)

275.202.01 100 4 $121.12

275.202.02 250 4 $191.56

275.202.03 500 4 $223.12

275.202.04 1000 4 $263.60

275.202.05 2000 4 $371.60

BOTTLES


BOTTLES

82.Dropping Bottles, Amber GlassManufactured from BOROSILICATE 3.3 glass fitted with ground in interchangeable stopper and rubber teat.

83.BOD BottleWith glass stopper. Manufactured from ASTM E 438 TYPE 1 Class A Boro 3.3 Glass.

81.Dropping Bottles, Clear GlassManufactured from BOROSILICATE 3.3 glass fitted with ground in interchangeable stopper and rubber teat.


279.202.01 30 10 $159.80

279.202.02 60 10 $186.40

279.202.03 120 10 $225.00

279.202.04 250 10 $268.50


279.202.01A 30 10 $178.50

279.202.02A 60 10 $207.10

279.202.03A 120 10 $250.00

279.202.04A 250 10 $285.70

Cat no. Capacity (mL) D. (mm) H. (mm) Pack Type Price/Pack

(CAD)284.202.02 300 70 150 2 $43.80


84.Pycnometers Gay - Lussac, CalibratedManufactured from ASTM 438 type 1 borosilicate 3.3 Glass.

85.Bottle, Gas Washing, FrittedGas washing bottle with standard taper 45/50 cap style stopper and fritted disc angled at 15° for even distribution of gas throughout absorbing material. Available with a coarse or extra coarse fritted disc. Springs are to be ordered separately. Order plastic clip instead. (not supplied).

BOTTLES

Cat no. Capacity (mL) Pack Type Price/Pack (CAD)

268.202.01 10 2 $100.00

268.202.02 25 2 $110.00

268.202.03 50 2 $118.00

268.202.04 100 2 $130.00

Cat no. Capacity (mL) Approx Height (mm) Porosity Pack Type Price/Each

(CAD)CS-B0300125C 125 290 C Each $190.00

CS-B0300125X 125 290 X-C Each $190.00

CS-B0300250C 250 305 C Each $240.00

CS-B0300250X 250 305 X-C Each $240.00

CS-B0300500C 500 380 C Each $254.00

CS-B0300500X 500 380 X-C Each $254.00

Replacement Components

CS-B0300001 Upper Portion Only, 125mL C Each $158.90

CS-B0300002 Upper Portion Only, 125mL X-C Each $153.00





CS-B0300007 Bottle Only 125mL - Each $53.50



CS-TH032 32mm S.S. Springs Pkg. of 2 - Each $7.90


BOTTLES

86.Bottle, Gas Washing, Fritted DiscGas washing bottle with an extra large diameter (60mm) fritted disc sealed into the bottom of the bottle to enable increased gas throughout and uniform gas distribution. Available with coarse or extra coarse fritted disc. The 24/40 standard taper top outer joint accepts CS-B0292440 gas inlet adapter which is to be ordered separately.

87.Alcohol Burner Bottle


Approx Height (mm) Porosity Pack Type Price/Each

(CAD)CS-B0310350C 350 250 C Each $210.90

Replacement Componenets

CS-B0310002 Bottle only C Each $180.90

CS-A0292440 24/40 Gas inlet adapter - Each $25.00

CS-CC210-24 24/40 keck clips - Each $4.20


Approx Height (mm)

Diameter(mm) Pack Type Price/Each

(CAD)CS-B003040 150 100 80 Each $15.30


* HDPE bottle not supplied

88.Burette With Straight Bore PTFE Key StopcockBurettes meet ASTM E-287 Class A specification.

90.Automatic Self Zeroing Burette With PTFE KeyBorosilicate glass burette having PTFE key giving accurate and economical liquid dispensing. These burettes are mounted on a high density polyethylene screw cap (HDPE bottle). It works by squeezing the flexible polyethylene bottle which forces liquid into the burette, built in overflow automatically pass excess liquid back into reservoir (HDPE bottle)*.

89.Straight Bore PTFE Stopcock Burettes, Funnel Filled - Educational Grade, Class A toleranceEconomical, versatile, TLG® buret composed of four replaceable components. The graduated barrel has a reinforced top and a lower end ruggedly constructed and accurately tooled to provide precise fit with a PTFE stopcock assembly. Assembly should be wetted before installation. A ground tip fits into lower end of PTFE stopcock assembly. The short length of 25 mL size fits most student laboratory drawers. The 25 mL size has permanent blue stained scale and the 50 mL has durable printed blur ceramic enamel.

BURETTES


Grad. Interval (mL)

Tolerance (±mL)

Qty/Pack

Qty/Case

Price/Each (CAD)

114.202.01 10 0.05 ±0.02 Each 9 $170.00

114.202.02 25 0.10 ±0.03 Each 9 $180.00

114.202.03 50 0.10 ±0.05 Each 9 $188.00

Burettes meet class A specification with more graduated intervals

114.202.01F 10 0.02 ±0.02 Each 9 $185.00

114.202.02F 25 0.05 ±0.03 Each 9 $195.00


Grad. Interval (mL)

Tolerance (±mL) Pack Type Price/Each

(CAD)

116.202.01 10 0.1 ±0.1 Each $115.90

New Cat no. Capacity (mL)

Graduated Interval (mL)

Tolerance (±mL) Pack Type Price/Each

(CAD)

115.202.01 25 0.1 ±0.03 Each $120.00

115.202.02 50 0.1 ±0.05 Each $125.00

Replacement Parts

115.202.01A Buret Barrel only, 25mL 6 $50.00

115.202.02A Buret Barrel only, 50mL 6 $55.00

115.202.03 PTFE Stopcock Assembly, common for both Each $129.00

115.202.04 Buret Tip, common for both 6 $10.90


91.Chromatography Flow Control Adapter0-4mm high vacuum valve with metering tip to adjust air pressure. With standard taper joint. Order CS-C0C3525 or CS-C0C0050 pinch type clamps with screw-locking device for ball joints. For replacement O-rings on high vacuum plug shaft, order CS-R010.

Cat no. Joints Capacity (mL) Pack Type Price/Each (CAD)

CS-C0195100 35/20 100 Each $75.90

CS-C0193502 35/20 250 Each $85.90

CS-C0193503 35/20 500 Each $90.90

CS-C0195500 50/30 500 Each $99.90

CS-C019501L 50/30 1000 Each $115.90

CS-C019502L 50/30 2000 Each $165.90

CS-C0184100 24/40 100 Each $72.90

CS-C0182402 24/40 250 Each $84.30

CS-C0182403 24/40 500 Each $87.30

CS-C0185500 45/50 500 Each $97.90

CS-C018451L 45/50 1000 Each $112.90

CS-C018452L 45/50 2000 Each $159.90

92.Chromatography ReservoirFor flash chromatography.

CHROMATOGRAPHY

38



Cat no. Joint Size Pack Type Price/Each (CAD)

CS-C01301 35/20 Each $98.63

CS-C01302 50/30 Each $120.95

CS-C01324 24/40 Each $66.16

CS-C01345 45/50 Each $95.49


CHROMATOGRAPHY


93.Funnel, Solvent AdditionDesign of funnel permits addition of solvents to flash chromatography columns without disturbing the silica-gel/packing layer. Lower end of the funnel is closed and the stem has a series of small holes through which the solvent drains. Top of the funnel is 90mm in diameter with the stem size as listed.

94.Chromatography Column, ModifiedShort column with lower 24/40 joint and hose connection for vacuum.

Cat no. Stem O.D. x length (mm) Pack Type Price/Each (CAD)

CS-F0291275 12 × 75 * Each $50.13

CS-F0291210 12 × 100 * Each $55.08

CS-F0291975 19 × 75 * Each $55.53

CS-F0291910 19 × 100 * Each $56.89

CS-F0292810 28 × 100 * * Each $64.41

CS-F0292812 28 × 125 * * Each $65.96

Note*Fit column with 24/40 joint or 35/20 joint

**Fit column with large joint like 45/50 standard or 50/30 spherical joint

Cat no. Column O.D. (mm)

Length (mm) Porosity Pack Type Price/Each

(CAD)CS-F0234020C 40 200 coarse Each $137.23

CS-F0234020M 40 200 medium Each $140.07

CS-F0234030C 40 300 coarse Each $159.03

CS-F0234030M 40 300 medium Each $161.21

CS-F0236020C 60 200 coarse Each $185.18

CS-F0236020M 60 200 medium Each $186.50

CS-F0236030C 60 300 coarse Each $204.44

CS-F0236030M 60 300 medium Each $206.83

CS-F0236040C 60 400 coarse Each $222.63

CS-F0236040M 60 400 medium Each $224.81

CS-F0238520C 90 200 coarse Each $235.99

CS-F0238520M 90 200 medium Each $238.17

CS-F0238530C 90 300 coarse Each $255.23

CS-F0238530M 90 300 medium Each $257.41

CS-F0238540C 90 400 coarse Each $290.43

CS-F0238540M 90 400 medium Each $292.61

CHROMATOGRAPHY

40


95.Chromatography Column, With Top Outer JointShort column with lower 24/40 joint and hose connection for use to apply vacuum. Column length is measured from bottom of top joint to fritted disc.

96.Chromatography, Rodaviss Joint, Flow Control AdapterFlow control adapter for use with column with 24/40 or 45/50 inner Rodaviss joint. Supplied complete with open top screw cap, loosening cap and O-ring. Adapter has a 0-4mm metering plug.

Cat no. Column O.D. (mm) Length (mm) Porosity Pack Type Price/Each

(CAD)CS-F0384020C 40 200 coarse Each $141.57

CS-F0384020M 40 200 medium Each $144.97

CS-F0384030C 40 300 coarse Each $163.94

CS-F0384030M 40 300 medium Each $166.12

CS-F0386020C 60 200 coarse Each $190.09

CS-F0386020M 60 200 medium Each $191.40

CS-F0386030C 60 300 coarse Each $209.35

CS-F0386030M 60 300 medium Each $211.73

CS-F0386040C 60 400 coarse Each $227.54

CS-F0386040M 60 400 medium Each $229.72

CS-F0388520C 90 200 coarse Each $240.89

CS-F0388520M 90 200 medium Each $243.07

CS-F0388530C 90 300 coarse Each $260.14

CS-F0388530M 90 300 medium Each $262.32

CS-F0388540C 90 400 coarse Each $295.34

CS-F0388540M 90 400 medium Each $297.52

Cat no. Joint Size Pack Type Price/Each (CAD)

CS-C0432440 24/40 Each $115.30

CS-C0434550 45/50 Each $124.20


CHROMATOGRAPHY


97.Chromatography, Rodaviss Joints, Reservoir Reservoir has a top 24/40 or 45/50 Rodaviss outer joint for use with flow controller, and the listed size lower inner joint. Supplied complete with open top cap, Viton® O-ring and loosening ring.

98.Disposable Cleanup/Drying Chromatography ColumnsThese disposable glass columns can be used for alumina, silica gel, or Florisil cleanup of sample extracts, or for sodium sulfate drying of samples. Being disposable, there is less chance of sample cross-contamination and there is no wasted time or added costs associated with cleaning reusable columns.

Cat no. Capacity (mL) Lower Inner Joint Size Pack Type Price/Each (CAD)

CS-C0414100 100 24/40 Each $72.90

CS-C0414250 250 24/40 Each $84.90

CS-C0414500 500 24/40 Each $89.90

CS-C0414000 1000 24/40 Each $94.90

CS-C0415500 500 45/50 Each $94.30

CS-C041451L 1000 45/50 Each $110.30

CS-C041452L 2000 45/50 Each $197.30

Cat no. Description Size (mm) O.D x I.D. x Height (mm)

Pack Type

Price/Pack (CAD)

CS-C0214210 Column, Disposable cleanup/drying 10 10.9 x 8.6 x 290 200 $178.00



99.Sprayer, TLC ChromatographyFor spraying chromogenic reagents when using thin layer or paper chromatography. The air inlet tube has an opening to release pressure and to stop spraying. Supplied with CS-C0S111420 metal clamp when ordering complete set.

Cat no. Description Capacity (mL) Joints Pack Type Price/Each (CAD)

CS-A0214050 Complete 50 24/40 Each $142.45

CS-A0214125 Complete 125 24/40 Each $203.81

CHROMATOGRAPHY

42

100.Chromatography, Column Plain, Teflon® StopcockWith reinforced beaded top.

Cat no.Column

O.D. (mm)

Column I.D.

(mm)

Effective Length inch (mm)

PTFE Stopcock Bore (mm)

Pack Type

Price/Each (CAD)

CS-C0361720 17 13 8 (203) 2 Each $69.38

CS-C0361725 17 13 10 (254) 2 Each $75.48

CS-C0361730 17 13 12 (305) 2 Each $81.57

CS-C0361740 17 13 18 (457) 2 Each $102.30

CS-C0362620 26 20 8 (203) 2 Each $69.38

CS-C0362625 26 20 10 (254) 2 Each $75.48

CS-C0362630 26 20 12 (305) 2 Each $81.57

CS-C0362640 26 20 18 (457) 2 Each $102.30

CS-C0363220 32 26 8 (203) 2 Each $86.45

CS-C0363225 32 26 10 (254) 2 Each $97.42

CS-C0363230 32 26 12 (305) 2 Each $108.40

CS-C0363240 32 26 18 (457) 2 Each $129.01

CS-C0364620 46 40 8 (203) 2 Each $86.45

CS-C0364625 46 40 10 (254) 2 Each $97.42

CS-C0364630 46 40 12 (305) 2 Each $108.40

CS-C0364640 46 40 18 (457) 2 Each $129.01

CS-C0366020 60 53 8 (203) 4 Each $110.02

CS-C0366025 60 53 10 (254) 4 Each $112.61

CS-C0366030 60 53 12 (305) 4 Each $118.15

CS-C0366040 60 53 18 (457) 4 Each $143.64

CS-C0366060 60 53 24 (610) 4 Each $170.46

CS-C0368020 80 73 8 (203) 4 Each $191.13

CS-C0368025 80 73 10 (254) 4 Each $197.63

CS-C0368030 80 73 12 (305) 4 Each $209.38

CS-C0368040 80 73 18 (457) 4 Each $259.88

CS-C0368060 80 73 24 (610) 4 Each $326.25


CHROMATOGRAPHY


101.Chromatography, Column, Fritted Disc, Teflon® StopcockWith Reinforced beaded top, coarse porosity fritted disc to support column packing.


Column I.D. (mm)

Effective Length inch (mm)

PTFE Stopcock Bore (mm)

Pack Type

Price/Each (CAD)

CS-C0361720C 17 13 8 (203) 2 Each $83.16

CS-C0361725C 17 13 10 (254) 2 Each $88.13

CS-C0361730C 17 13 12 (305) 2 Each $93.10

CS-C0361740C 17 13 18 (457) 2 Each $109.26

CS-C0362620C 26 20 8 (203) 2 Each $83.16

CS-C0362625C 26 20 10 (254) 2 Each $88.13

CS-C0362630C 26 20 12 (305) 2 Each $93.10

CS-C0362640C 26 20 18 (457) 2 Each $109.26

CS-C0363220C 32 26 8 (203) 2 Each $105.53

CS-C0363225C 32 26 10 (254) 2 Each $114.34

CS-C0363230C 32 26 12 (305) 2 Each $122.93

CS-C0363240C 32 26 18 (457) 2 Each $149.03

CS-C0364620C 46 40 8 (203) 2 Each $105.53

CS-C0364625C 46 40 10 (254) 2 Each $114.34

CS-C0364630C 46 40 12 (305) 2 Each $122.93

CS-C0364640C 46 40 18 (457) 2 Each $149.03

CS-C0366020C 60 53 8 (203) 4 Each $154.45

CS-C0366025C 60 53 10 (254) 4 Each $154.45

CS-C0366030C 60 53 12 (305) 4 Each $160.10

CS-C0366040C 60 53 18 (457) 4 Each $171.29

CS-C0366060C 60 53 24 (610) 4 Each $212.19

CS-C0368020C 80 73 8 (203) 4 Each $251.35

CS-C0368025C 80 73 10 (254) 4 Each $261.13

CS-C0368030C 80 73 12 (305) 4 Each $274.88

CS-C0368040C 80 73 18 (457) 4 Each $354.88

CS-C0368060C 80 73 24 (610) 4 Each $387.94

CHROMATOGRAPHY

44

102.Chromatography ColumnGeneral purpose column has a Teflon® stopcock and a top outer joint. For flash chromatography.


Column I.D. (mm)

Effective Length inch

(mm)Joints

Stopcock Bore (mm)

Pack Type

Price/Each (CAD)

CS-C0184171 17 13 8 (203) 24/40 2 Each $91.45

CS-C0184172 17 13 10 (254) 24/40 2 Each $96.65

CS-C0184173 17 13 12 (305) 24/40 2 Each $101.84

CS-C0184174 17 13 18(457) 24/40 2 Each $122.39

CS-C0184261 26 20 8 (203) 24/40 2 Each $91.45

CS-C0184262 26 20 10 (254) 24/40 2 Each $96.65

CS-C0184263 26 20 12 (305) 24/40 2 Each $101.84

CS-C0184264 26 20 18 (457) 24/40 2 Each $122.38

CS-C0184321 32 26 8 (203) 24/40 2 Each $113.44

CS-C0184322 32 26 10 (254) 24/40 2 Each $122.48

CS-C0184323 32 26 12 (305) 24/40 2 Each $131.44

CS-C0184324 32 26 18 (457) 24/40 2 Each $157.17

CS-C0184461 46 40 8 (203) 24/40 2 Each $113.44

CS-C0184462 46 40 10 (254) 24/40 2 Each $122.38

CS-C0184463 46 40 12 (305) 24/40 2 Each $131.44

CS-C0184464 46 40 18 (457) 24/40 2 Each $157.17

CS-C0184601 60 53 8 (203) 24/40 4 Each $256.99

CS-C0184602 60 53 10 (254) 24/40 4 Each $157.17

CS-C0184603 60 53 12 (305) 24/40 4 Each $170.10

CS-C0184604 60 53 18 (457) 24/40 4 Each $189.43

CS-C0184605 60 53 24 (610) 24/40 4 Each $222.90

CS-C0184801 80 73 8 (203) 45/50 4 Each $221.15

CS-C0184802 80 73 10 (254) 45/50 4 Each $221.15

CS-C0184803 80 73 12 (305) 45/50 4 Each $234.88

CS-C0184804 80 73 18 (457) 45/50 4 Each $271.22

CS-C0184805 80 73 24 (610) 45/50 4 Each $328.72


CHROMATOGRAPHY


103.Chromatography Column, With a Coarse PorosityGeneral purpose column has a Teflon® stopcock and a top outer joint. With a coarse porosity fritted disc to support column packing.


Column I.D. (mm)

Effective Length inch (mm) Joints Stopcock

Bore (mm)Pack Type

Price/Each (CAD)

CS-C0184171C 17 13 8 (203) 24/40 2 Each $106.41

CS-C0184172C 17 13 10 (254) 24/40 2 Each $111.70

CS-C0184173C 17 13 12 (305) 24/40 2 Each $118.23

CS-C0184174C 17 13 18(457) 24/40 2 Each $140.40

CS-C0184261C 26 20 8 (203) 24/40 2 Each $106.41

CS-C0184262C 26 20 10 (254) 24/40 2 Each $111.70

CS-C0184263C 26 20 12 (305) 24/40 2 Each $118.23

CS-C0184264C 26 20 18 (457) 24/40 2 Each $140.40

CS-C0184321C 32 26 8 (203) 24/40 2 Each $130.05

CS-C0184322C 32 26 10 (254) 24/40 2 Each $140.40

CS-C0184323C 32 26 12 (305) 24/40 2 Each $149.02

CS-C0184324C 32 26 18 (457) 24/40 2 Each $174.76

CS-C0184461C 46 40 8 (203) 24/40 2 Each $142.86

CS-C0184462C 46 40 10 (254) 24/40 2 Each $152.71

CS-C0184463C 46 40 12 (305) 24/40 2 Each $161.33

CS-C0184464C 46 40 18 (457) 24/40 2 Each $187.32

CS-C0184601C 60 53 8 (203) 24/40 4 Each $181.29

CS-C0184602C 60 53 10 (254) 24/40 4 Each $181.29

CS-C0184603C 60 53 12 (305) 24/40 4 Each $194.34

CS-C0184604C 60 53 18 (457) 24/40 4 Each $214.05

CS-C0184605C 60 53 24 (610) 24/40 4 Each $248.16

CS-C0184801C 80 73 8 (203) 45/50 4 Each $280.65

CS-C0184802C 80 73 10 (254) 45/50 4 Each $296.10

CS-C0184803C 80 73 12 (305) 45/50 4 Each $305.02

CS-C0184804C 80 73 18 (457) 45/50 4 Each $365.49

CS-C0184805C 80 73 24 (610) 45/50 4 Each $428.17

CHROMATOGRAPHY

46

104.Chromatography, Column, With ReservoirWith 24/40 outer joint at top.


Column I.D. (mm)

Effective Length inch (mm) Joints PTFE Stopcock

Bore (mm)Capacity of

Reservoir (mL)Pack Type

Price/Each (CAD)

CS-C0371720 17 13 8 (203) 24/40 2 100 Each $113.77

CS-C0371730 17 13 12 (305) 24/40 2 100 Each $129.44

CS-C0371740 17 13 18 (457) 24/40 2 250 Each $135.16

CS-C0372620 26 20 8 (203) 24/40 2 250 Each $142.38

CS-C0372625 26 20 10 (254) 24/40 2 250 Each $127.87

CS-C0372630 26 20 12 (305) 24/40 2 250 Each $162.07

CS-C0372640 26 20 18 (457) 24/40 2 500 Each $188.09

CS-C0373220 32 26 8 (203) 24/40 2 500 Each $146.26

CS-C0373225 32 26 10 (254) 24/40 2 500 Each $182.23

CS-C0373230 32 26 12 (305) 24/40 2 500 Each $175.83

CS-C0373240 32 26 18 (457) 24/40 2 500 Each $193.41

CS-C0374620 46 40 8 (203) 24/40 2 500 Each $177.74

CS-C0374625 46 40 10 (254) 24/40 2 500 Each $160.23

CS-C0374630 46 40 12 (305) 24/40 2 500 Each $214.87

CS-C0374640 46 40 18 (457) 24/40 2 500 Each $236.12

CS-C0376020 60 53 8 (203) 24/40 4 500 Each $201.24

CS-C0376025 60 53 10 (254) 24/40 4 500 Each $201.24

CS-C0376030 60 53 12 (305) 24/40 4 1000 Each $222.63

CS-C0376040 60 53 18 (457) 24/40 4 1000 Each $258.60

CS-C0376060 60 53 24 (610) 24/40 4 1000 Each $266.91

CS-C0378020 80 73 8 (203) 24/40 4 1000 Each $254.45

CS-C0378025 80 73 10 (254) 24/40 4 1000 Each $264.18

CS-C0378030 80 73 12 (305) 24/40 4 1000 Each $275.09

CS-C0378040 80 73 18 (457) 24/40 4 1000 Each $321.01

CS-C0378060 80 73 24 (610) 24/40 4 1000 Each $340.60


CHROMATOGRAPHY


105.Chromatography, Column, With Reservoir, Fritted DiscWith a coarse porosity sealed in fritted disc to support column packing.


Column I.D. (mm)



Reservoir (mL)Pack Type

Price/Each (CAD)

CS-C0371720C 17 13 8 (203) 24/40 2 100 Each $118.75

CS-C0371730C 17 13 12 (305) 24/40 2 100 Each $124.13

CS-C0371740C 17 13 18 (457) 24/40 2 250 Each $131.81

CS-C0372620C 26 20 8 (203) 24/40 2 250 Each $144.88

CS-C0372625C 26 20 10 (254) 24/40 2 250 Each $169.75

CS-C0372630C 26 20 12 (305) 24/40 2 250 Each $161.75

CS-C0372640C 26 20 18 (457) 24/40 2 500 Each $191.81

CS-C0373220C 32 26 8 (203) 24/40 2 500 Each $153.88

CS-C0373225C 32 26 10 (254) 24/40 2 500 Each $172.31

CS-C0373230C 32 26 12 (305) 24/40 2 500 Each $181.38

CS-C0373240C 32 26 18 (457) 24/40 2 500 Each $198.31

CS-C0374620C 46 40 8 (203) 24/40 2 500 Each $171.56

CS-C0374625C 46 40 10 (254) 24/40 2 500 Each $185.25

CS-C0374630C 46 40 12 (305) 24/40 2 500 Each $218.50

CS-C0374640C 46 40 18 (457) 24/40 2 500 Each $237.50

CS-C0376020C 60 53 8 (203) 24/40 4 500 Each $185.63

CS-C0376025C 60 53 10 (254) 24/40 4 500 Each $209.44

CS-C0376030C 60 53 12 (305) 24/40 4 1000 Each $231.56

CS-C0376040C 60 53 18 (457) 24/40 4 1000 Each $264.81

CS-C0376060C 60 53 24 (610) 24/40 4 1000 Each $269.56

CS-C0378020C 80 73 8 (203) 24/40 4 1000 Each $244.81

CS-C0378025C 80 73 10 (254) 24/40 4 1000 Each $261.25

CS-C0378030C 80 73 12 (305) 24/40 4 1000 Each $292.13

CS-C0378040C 80 73 18 (457) 24/40 4 1000 Each $307.38

CS-C0378060C 80 73 24 (610) 24/40 4 1000 Each $317.44

CHROMATOGRAPHY

48


106.Chromatography Column, Spherical JointsSpherical joint used with pinch clamp makes quick and tight connection under pressure for flash chromatography.


Column I.D. (mm)


Bore (mm) Pack Type Price/Each (CAD)

CS-C0195171 17 13 8 (203) 35/20 2 Each $117.79

CS-C0195172 17 13 10 (254) 35/20 2 Each $125.34

CS-C0195173 17 13 12 (305) 35/20 2 Each $131.39

CS-C0195261 26 20 8 (203) 35/20 2 Each $117.79

CS-C0195262 26 20 10 (254) 35/20 2 Each $125.34

CS-C0195263 26 20 12 (305) 35/20 2 Each $131.39

CS-C0195264 26 20 18 (457) 35/20 2 Each $158.57

CS-C0195321 32 26 8 (203) 35/20 2 Each $146.48

CS-C0195322 32 26 10 (254) 35/20 2 Each $158.57

CS-C0195323 32 26 12 (305) 35/20 2 Each $170.64

CS-C0195324 32 26 18 (457) 35/20 2 Each $202.36

CS-C0195461 46 40 8 (203) 35/20 2 Each $146.48

CS-C0195462 46 40 10 (254) 35/20 2 Each $158.57

CS-C0195463 46 40 12 (305) 35/20 2 Each $170.64

CS-C0195464 46 40 18 (457) 35/20 2 Each $202.36

CS-C0195601 60 53 8 (203) 50/30 4 Each $228.76

CS-C0195602 60 53 10 (254) 50/30 4 Each $245.21

CS-C0195603 60 53 12 (305) 50/30 4 Each $258.00

CS-C0195604 60 53 18 (457) 50/30 4 Each $270.12

CS-C0195605 60 53 24 (610) 50/30 4 Each $317.80

CS-C0195801 80 73 8 (203) 50/30 4 Each $256.59

CS-C0195802 80 73 10 (254) 50/30 4 Each $266.95

CS-C0195803 80 73 12 (305) 50/30 4 Each $289.29

CS-C0195804 80 73 18 (457) 50/30 4 Each $338.34

CS-C0195805 80 73 24 (610) 50/30 4 Each $380.11


CHROMATOGRAPHY


107.Chromatography Column, Fritted Disc, Spherical JointsWith a coarse porosity fritted disc to support packing material.


Column I.D. (mm)

Effective Length inch

(mm)Joints PTFE Stopcock

Bore (mm) Pack Type Price/Each (CAD)

CS-C0195171C 17 13 8 (203) 35/20 2 Each $109.61

CS-C0195172C 17 13 10 (254) 35/20 2 Each $115.77

CS-C0195173C 17 13 12 (305) 35/20 2 Each $121.93

CS-C0195261C 26 20 8 (203) 35/20 2 Each $170.26

CS-C0195262C 26 20 10 (254) 35/20 2 Each $113.23

CS-C0195263C 26 20 12 (305) 35/20 2 Each $121.93

CS-C0195264C 26 20 18 (457) 35/20 2 Each $145.33

CS-C0195321C 32 26 8 (203) 35/20 2 Each $134.24

CS-C0195322C 32 26 10 (254) 35/20 2 Each $144.10

CS-C0195323C 32 26 12 (305) 35/20 2 Each $153.94

CS-C0195324C 32 26 18 (457) 35/20 2 Each $181.04

CS-C0195461C 46 40 8 (203) 35/20 2 Each $141.63

CS-C0195462C 46 40 10 (254) 35/20 2 Each $150.25

CS-C0195463C 46 40 12 (305) 35/20 2 Each $160.10

CS-C0195464C 46 40 18 (457) 35/20 2 Each $187.20

CS-C0195601C 60 53 8 (203) 50/30 4 Each $207.08

CS-C0195602C 60 53 10 (254) 50/30 4 Each $220.52

CS-C0195603C 60 53 12 (305) 50/30 4 Each $228.80

CS-C0195604C 60 53 18 (457) 50/30 4 Each $235.42

CS-C0195605C 60 53 24 (610) 50/30 4 Each $270.30

CS-C0195801C 80 73 8 (203) 50/30 4 Each $229.01

CS-C0195802C 80 73 10 (254) 50/30 4 Each $237.54

CS-C0195803C 80 73 12 (305) 50/30 4 Each $255.61

CS-C0195804C 80 73 18 (457) 50/30 4 Each $292.99

CS-C0195805C 80 73 24 (610) 50/30 4 Each $315.99

CHROMATOGRAPHY

50

108.Chromatography, Column, With ReservoirWith 35/20 spherical joint.


Column I.D. (mm)



Reservoir (mL) Pack Type Price/Each (CAD)

CS-C0381720 17 13 8 (203) 35/20 2 100 Each $132.90

CS-C0381730 17 13 12 (305) 35/20 2 100 Each $149.26

CS-C0381740 17 13 18 (457) 35/20 2 250 Each $190.27

CS-C0382620 26 20 8 (203) 35/20 2 250 Each $166.12

CS-C0382625 26 20 10 (254) 35/20 2 250 Each $192.39

CS-C0382630 26 20 12 (305) 35/20 2 250 Each $205.81

CS-C0382640 26 20 18 (457) 35/20 2 500 Each $226.52

CS-C0383220 32 26 8 (203) 35/20 2 500 Each $194.70

CS-C0383225 32 26 10 (254) 35/20 2 500 Each $211.05

CS-C0383230 32 26 12 (305) 35/20 2 500 Each $221.95

CS-C0383240 32 26 18 (457) 35/20 2 500 Each $245.05

CS-C0384620 46 40 8 (203) 35/20 2 500 Each $184.82

CS-C0384625 46 40 10 (254) 35/20 2 500 Each $198.79

CS-C0384630 46 40 12 (305) 35/20 2 500 Each $210.03

CS-C0384640 46 40 18 (457) 35/20 2 500 Each $245.05

CS-C0386020 60 53 8 (203) 35/20 4 500 Each $234.35

CS-C0386025 60 53 10 (254) 35/20 4 500 Each $258.74

CS-C0386030 60 53 12 (305) 35/20 4 1000 Each $278.50

CS-C0386040 60 53 18 (457) 35/20 4 1000 Each $288.71

CS-C0386060 60 53 24 (610) 35/20 4 1000 Each $307.79

CS-C0388020 80 73 8 (203) 35/20 4 1000 Each $261.46

CS-C0388025 80 73 10 (254) 35/20 4 1000 Each $274.53

CS-C0388030 80 73 12 (305) 35/20 4 1000 Each $287.01

CS-C0388040 80 73 18 (457) 35/20 4 1000 Each $334.63

CS-C0388060 80 73 24 (610) 35/20 4 1000 Each $354.11


CHROMATOGRAPHY


109.Chromatography, Column, With Reservoir, Fritted DiscWith a coarse fritted disc to support column packing, with 35/20 spherical joint.


Column I.D. (mm)



Reservoir (mL) Pack Type Price/Each (CAD)

CS-C0381720C 17 13 8 (203) 35/20 2 100 Each $163.84

CS-C0381730C 17 13 12 (305) 35/20 2 100 Each $170.86

CS-C0381740C 17 13 18 (457) 35/20 2 250 Each $182.03

CS-C0382620C 26 20 8 (203) 35/20 2 250 Each $182.03

CS-C0382625C 26 20 10 (254) 35/20 2 250 Each $198.79

CS-C0382630C 26 20 12 (305) 35/20 2 250 Each $210.23

CS-C0382640C 26 20 18 (457) 35/20 2 500 Each $236.64

CS-C0383220C 32 26 8 (203) 35/20 2 500 Each $212.25

CS-C0383225C 32 26 10 (254) 35/20 2 500 Each $228.87

CS-C0383230C 32 26 12 (305) 35/20 2 500 Each $236.94

CS-C0383240C 32 26 18 (457) 35/20 2 500 Each $263.24

CS-C0384620C 46 40 8 (203) 35/20 2 500 Each $212.82

CS-C0384625C 46 40 10 (254) 35/20 2 500 Each $228.72

CS-C0384630C 46 40 12 (305) 35/20 2 500 Each $236.60

CS-C0384640C 46 40 18 (457) 35/20 2 500 Each $271.61

CS-C0386020C 60 53 8 (203) 35/20 4 500 Each $264.60

CS-C0386025C 60 53 10 (254) 35/20 4 500 Each $285.84

CS-C0386030C 60 53 12 (305) 35/20 4 1000 Each $306.63

CS-C0386040C 60 53 18 (457) 35/20 4 1000 Each $340.49

CS-C0386060C 60 53 24 (610) 35/20 4 1000 Each $375.91

CS-C0388020C 80 73 8 (203) 35/20 4 1000 Each $290.08

CS-C0388025C 80 73 10 (254) 35/20 4 1000 Each $306.43

CS-C0388030C 80 73 12 (305) 35/20 4 1000 Each $324.82

CS-C0388040C 80 73 18 (457) 35/20 4 1000 Each $372.44

CS-C0388060C 80 73 24 (610) 35/20 4 1000 Each $407.25

CHROMATOGRAPHY

52

110.Chromatography, Column, Rodaviss Joints, Teflon® StopcockThe unique design of the Rodaviss joint affords a grease free seal while holding glassware together without clamps. Column is supplied complete with open top cap, loosening ring and O-ring.

Cat no.Column

O.D. (mm)

Column I.D.

(mm)

Effective Length

inch (mm)

Joints

PTFE Stopcock

Bore (mm)

Pack Type

Price/Each (CAD)

CS-C0404171 17 13 8 (203) 24/40 2 Each $137.20

CS-C0404172 17 13 10 (254) 24/40 2 Each $144.14

CS-C0404173 17 13 12 (305) 24/40 2 Each $151.24

CS-C0404174 17 13 18 (457) 24/40 2 Each $180.60

CS-C0404261 26 20 8 (203) 24/40 2 Each $137.20

CS-C0404262 26 20 10 (254) 24/40 2 Each $143.34

CS-C0404263 26 20 12 (305) 24/40 2 Each $151.24

CS-C0404264 26 20 18 (457) 24/40 2 Each $180.60

CS-C0404321 32 26 8 (203) 24/40 2 Each $172.90

CS-C0404322 32 26 10 (254) 24/40 2 Each $180.60

CS-C0404323 32 26 12 (305) 24/40 2 Each $191.84

CS-C0404324 32 26 18 (457) 24/40 2 Each $228.22

CS-C0404461 46 40 8 (203) 24/40 2 Each $168.00

CS-C0404462 46 40 10 (254) 24/40 2 Each $181.08

CS-C0404463 46 40 12 (305) 24/40 2 Each $191.84

CS-C0404464 46 40 18 (457) 24/40 2 Each $228.22

CS-C0404601 60 53 8 (203) 24/40 2 Each $222.22

CS-C0404602 60 53 10 (254) 24/40 2 Each $234.76

CS-C0404603 60 53 12 (305) 24/40 2 Each $246.41

CS-C0404604 60 53 18 (457) 24/40 2 Each $271.61

CS-C0404605 60 53 24 (610) 24/40 2 Each $317.80

CS-C0405801 80 73 8 (203) 45/50 4 Each $303.81

CS-C0405802 80 73 10 (254) 45/50 4 Each $315.96

CS-C0405803 80 73 12 (305) 45/50 4 Each $327.61

CS-C0405804 80 73 18 (457) 45/50 4 Each $389.20

CS-C0405805 80 73 24 (610) 45/50 4 Each $456.44


CHROMATOGRAPHY


111.Chromatography, Column, Rodaviss Joints, Teflon® Stopcock, Fritted DiscThe unique design of the Rodaviss joint affords a grease free seal while holding glassware together without clamps. Column is supplied complete with open top cap, loosening ring and O-ring. With a sealed in coarse porosity fritted disc to support column packing.

Cat no.Column

O.D. (mm)

Column I.D.

(mm)

Effective Length

inch (mm)

Joints

PTFE Stopcock

Bore (mm)

Pack Type

Price/Each (CAD)

CS-C0404171C 17 13 8 (203) 24/40 2 Each $154.03

CS-C0404172C 17 13 10 (254) 24/40 2 Each $162.79

CS-C0404173C 17 13 12 (305) 24/40 2 Each $171.95

CS-C0404174C 17 13 18 (457) 24/40 2 Each $194.77

CS-C0404261C 26 20 8 (203) 24/40 2 Each $155.39

CS-C0404262C 26 20 10 (254) 24/40 2 Each $160.64

CS-C0404263C 26 20 12 (305) 24/40 2 Each $170.86

CS-C0404264C 26 20 18 (457) 24/40 2 Each $198.86

CS-C0404321C 32 26 8 (203) 24/40 2 Each $186.53

CS-C0404322C 32 26 10 (254) 24/40 2 Each $198.86

CS-C0404323C 32 26 12 (305) 24/40 2 Each $212.82

CS-C0404324C 32 26 18 (457) 24/40 2 Each $247.84

CS-C0404461C 46 40 8 (203) 24/40 2 Each $196.00

CS-C0404462C 46 40 10 (254) 24/40 2 Each $213.78

CS-C0404463C 46 40 12 (305) 24/40 2 Each $221.20

CS-C0404464C 46 40 18 (457) 24/40 2 Each $256.22

CS-C0404601C 60 53 8 (203) 24/40 2 Each $257.98

CS-C0404602C 60 53 10 (254) 24/40 2 Each $268.82

CS-C0404603C 60 53 12 (305) 24/40 2 Each $275.84

CS-C0404604C 60 53 18 (457) 24/40 2 Each $301.04

CS-C0404605C 60 53 24 (610) 24/40 2 Each $347.23

CS-C0405801C 80 73 8 (203) 45/50 4 Each $342.40

CS-C0405802C 80 73 10 (254) 45/50 4 Each $354.11

CS-C0405803C 80 73 12 (305) 45/50 4 Each $363.99

CS-C0405804C 80 73 18 (457) 45/50 4 Each $428.44

CS-C0405805C 80 73 24 (610) 45/50 4 Each $490.02

COLD TEST


112.Cold Test (Cloud and Pour Points) JarsThese jars are used to determine the temperature (cloud point) at which haziness is first observed at the bottom of the jar when petroleum oils are cooled and examined under specified conditions (ASTM D2500), and also the temperature at which chilled undisturbed oils will pour (ASTM D97). Jar has a flat bottom and a reinforced bead at open end. With a marking spot and a graduation ring located 54mm from the inside bottom.

Cat no. Approx. O.D. (mm)

Approx. Height (mm)

Size (mm) Qty/Pack

Qty/Case

Price/Pack (CAD)

CS-CT250001 35 125 54 12 36 $238.80

113.Beads, Solid GlassUseful as packing for distillation columns, mixing beads and boiling stones. Beads are packaged in 0.45 kg (1 lb).

114.Glass HelicesEach helice consists of a single turn of borosilicate glass rod, approximately 0.5mm in diam.

Cat no. Approx. Diam. (mm)

Diam. Tolerance (± mm) Qty/Pack Price/Pk

(CAD)

CS-G0L7268-3 3.0 ±0.75 1lbs $42.00

CS-G0L7268-4 4.0 ±0.75 1lbs $47.00

CS-G0L7268-5 5.0 ±0.75 1lbs $49.00

CS-G0L7268-6 6.0 ±0.75 1lbs $50.90

Cat no. Approx. Coil I.D. (mm) Qty/Pack Price/Pk (CAD)

CS-C0000003 3.0 1lbs $740.00

CS-C0000045 4.0 - 5.0 1lbs $760.00

CS-C0000006 6.0 1lbs $795.00

COLUMN PACKING MATERIAL


COLUMN, DISTILLATION




115.Column, Distilling, VigreauxColumn Length is measured from the highest to lowest indent in the column.

116.Column, Distilling, vacuum JacketedWith 12mm I.D. indentations to support packing material. Vacuum jacketed to improve performance.

Cat no. Indentation Length (mm)

Upper Joint

Lower Joint Pack Type Price/Each

(CAD)CS-C0101075 75 14/20 14/20 Each $59.00

CS-C0101100 100 14/20 14/20 Each $61.00

CS-C0101420 120 14/20 14/20 Each $62.00

CS-C0101922 120 19/22 19/22 Each $64.90

CS-C0109130 130 19/22 19/22 Each $66.30

CS-C0102441 120 24/40 24/40 Each $65.30

CS-C0104150 150 24/40 24/40 Each $66.30

CS-C0102442 200 24/40 24/40 Each $64.90

CS-C0102443 300 24/40 24/40 Each $81.90

Cat no. Joints Jacket Height (mm) Pack Type Price/Each (CAD)

CS-C0161100 14/20 130 Each $190.12

CS-C0169130 19/22 130 Each $191.57

CS-C0169250 19/22 250 Each $204.70

CS-C0164250 24/40 250 Each $234.88


117.Column, DistillationIndentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.

Cat no. Joints Jacket Height (mm)

Column Overall Height (mm) Pack Type Price/Each

(CAD)CS-C0171120 14/20 110 180 Each $82.90

CS-C0171200 14/20 200 280 Each $85.90

CS-C0179110 19/22 110 200 Each $87.30

CS-C0179200 19/22 200 280 Each $89.90

CS-C0174200 24/40 200 330 Each $101.90



118.Condenser, Cold Finger, With Drip TipExtended offset lower tip for drop control.

119.Condenser, RefluxCoil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and a lower inner drip tip joint. Hose connections have an O.D. of 8mm or 10mm at the middle serration.

Cat no. Joint Length Below Joint (mm)

Hose O.D. (mm) Pack Type Price/Each

(CAD)CS-C0111420 14/20 100 8 Each $62.90

CS-C0111922 19/22 100 8 Each $64.90

CS-C0114150 24/40 150 8 Each $71.90

CS-C0114200 24/40 200 10 Each $78.30

CS-C0112440 24/40 220 10 Each $82.30

CS-C0114250 24/40 250 10 Each $86.90

Cat no. Jacket Length (mm) Joints

Overall Height (mm)

Hose Connection

(mm)

Pack Type

Price/Each (CAD)

CS-C0261100 100 14/20 205 8 Each $123.25

CS-C0262280 180 14/20 305 8 Each $125.53

CS-C0269100 100 19/22 205 8 Each $124.13

CS-C0264125 125 24/40 275 8 Each $127.08

CS-C0264175 175 24/40 325 10 Each $161.46

CS-C0264225 225 24/40 375 10 Each $172.37

CS-C0264275 275 24/40 425 10 Each $178.20

CONDENSER


CONDENSER





120.Condenser, Reflux, Removable Hose ConnectionsCoil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and a lower inner drip tip joint. Hose connections have an O.D. of 8mm or 10mm at the middle serration.

121.Condenser, CoiledWith joints at top and bottom.

122.Condenser, Coiled, Removable Hose ConnectionWith joints at top and bottom.

Cat no. Jacket Length (mm) Joints Over Height

(mm) Hose O.D. Pack Type

Price/Each (CAD)

CS-C0561100 100 14/20 210 8 Each $157.34

CS-C0562280 180 14/20 305 8 Each $160.64

CS-C0569100 100 19/22 210 8 Each $161.30

CS-C0564125 125 24/40 285 10 Each $179.39

CS-C0564175 175 24/40 335 10 Each $191.86

CS-C0564225 225 24/40 375 10 Each $204.80

CS-C0564275 275 24/40 435 10 Each $245.39

Cat no. Jacket Length (mm) Joints Hose O.D. Pack Type Price/Each

(CAD)CS-C0121100 100 14/20 8 Each $128.38

CS-C0121120 120 14/20 8 Each $128.38

CS-C0129200 200 19/22 8 Each $134.00

CS-C0124200 200 24/40 10 Each $134.00

CS-C0124250 250 24/40 10 Each $151.02

CS-C0124300 300 24/40 10 Each $157.84

CS-C0124400 400 24/40 10 Each $182.71

Cat no. Jacket Length (mm) Joints Hose O.D. Pack Type Price/Each

(CAD)CS-C0521100 100 14/20 8 Each $138.47

CS-C0521120 120 14/20 8 Each $144.28

CS-C0529200 200 19/22 8 Each $147.84

CS-C0524200 200 24/40 8 Each $158.80

CS-C0524300 300 24/40 8 Each $183.68

CS-C0524400 400 24/40 8 Each $210.87

CONDENSER

59



123.Condenser, Graham

124.Condenser, Graham, Removable Hose Connections

Cat no. Joints Jacket Length (mm)

O.D. Hose Connection (mm) Pack Type Price/Each

(CAD)CS-C0141120 14/20 120 8 Each $106.78

CS-C0149120 19/22 120 8 Each $108.58

CS-C0149200 19/22 200 8 Each $116.74

CS-C0144200 24/40 200 8 Each $116.75

CS-C0149250 19/22 250 8 Each $119.69

CS-C0144250 24/40 250 10 Each $120.62

CS-C0149300 19/22 300 8 Each $123.73

CS-C0144300 24/40 300 10 Each $124.49

CS-C0149400 19/22 400 8 Each $134.23

CS-C0144400 24/40 400 10 Each $134.89

CS-C0144500 24/40 500 10 Each $172.51

Cat no. Joints Jacket Length (mm)

O.D. Hose Connection (mm) Pack Type Price/Each

(CAD)CS-C0541120 14/20 120 8 Each $127.77

CS-C0549200 19/22 200 8 Each $142.21

CS-C0544200 24/40 200 10 Each $152.21

CS-C0544250 24/40 250 10 Each $162.80

CS-C0544300 24/40 300 10 Each $185.90

CS-C0544400 24/40 400 10 Each $196.90

CS-C0544500 24/40 500 10 Each $240.90


125.Condenser WestWith narrow tube space for high cooling efficiency.

Cat no. Joints Jacket Length (mm) Pack Type Price/Each (CAD)

CS-C0151110 14/20 110 Each $58.88

CS-C0150190 14/20 190 Each $62.88

CS-C0151200 14/20 200 Each $65.95

CS-C0159190 19/22 190 Each $62.88

CS-C0159200 19/22 200 Each $68.18

CS-C0154100 24/40 100 Each $74.45

CS-C0151190 24/40 190 Each $70.90

CS-C0154200 24/40 200 Each $76.00

CS-C0154300 24/40 300 Each $82.05


CONDENSER



126.Condenser West, Removable Hose ConnectionsWith Narrow tube space for high cooling efficiency.

Cat no. Joints Jacket Length (mm) Pack Type Price/Each (CAD)

CS-C0551110 14/20 110 Each $67.06

CS-C0550190 14/20 190 Each $72.14

CS-C0551200 14/20 200 Each $76.30

CS-C0559190 19/22 190 Each $77.48

CS-C0559200 19/22 200 Each $79.33

CS-C0554100 24/40 100 Each $81.84

CS-C0551190 24/40 190 Each $87.98

CS-C0554200 24/40 200 Each $90.95

CS-C0554300 24/40 300 Each $96.29



127.Condenser, Reflux, Large Cooling CapacityJacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

128.Condenser, Reflux, Large Cooling Capacity, Removable Hose ConnectionsJacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

Cat no. Coil Length (mm) Joints Overall Height

(mm)

Hose Connection

(mm)

Pack Type

Price/Each (CAD)

CS-C0314125 125 24/40 300 10 Each $155.00

CS-C0314175 175 24/40 350 10 Each $182.00

Cat no. Coil Length (mm) Joints Overall

Height (mm)

Hose Connection

(mm)Pack Type Price/Each

(CAD)

CS-C0534125 125 24/40 300 10 Each $246.00

CS-C0534175 175 24/40 350 10 Each $298.00

CONDENSER

61




129.Condenser, Reflux, Bent 105°Coil Section is 100mm in height.

130.Condenser, Reflux, Bent 105° , Removable Hose ConnectionsCoil Section is 100mm in height.

131.Condenser, Internal Coil, JacketedDouble cooling capacity.


CS-C0351420 14/20 Each $170.00

CS-C0351922 19/22 Each $187.30


CS-C0581420 14/20 Each $260.00

CS-C0581922 19/22 Each $284.00

Cat no. Jacket Length (mm) Joints Hose

Connection (mm) Pack Type Price/Each (CAD)

CS-C0339250 250 19/22 10 Each $261.49

CS-C0334250 250 24/40 10 Each $269.52

CS-C0334300 300 24/40 10 Each $279.72

CS-C0334400 400 24/40 10 Each $291.33

CS-C0334500 500 24/40 10 Each $302.19



CONDENSER



132.Condenser, AllihnWith joints at the top and bottom.

133.Condenser, Allihn, Removable Hose ConnectionsWith joints at the top and bottom.

Cat no. Jacket Length (mm) Joints O.D. Hose


CS-C0251120 120 14/20 8 Each $89.90

CS-C0259200 200 19/22 8 Each $102.90

CS-C0259300 300 19/22 8 Each $110.90

CS-C0251200 200 24/40 10 Each $101.90

CS-C0254300 300 24/40 10 Each $115.90

CS-C0254400 400 24/40 10 Each $127.30



CS-C0621120 120 14/20 8 Each $95.90

CS-C0629200 200 19/22 8 Each $98.30

CS-C0629300 300 19/22 8 Each $108.30

CS-C0621200 200 24/40 8 Each $101.90

CS-C0624300 300 24/40 8 Each $114.10

CS-C0624400 400 24/40 8 Each $129.90


134.Condenser, LiebigWith joints at the top and bottom.



CS-C0201120 120 14/20 8 Each $70.68

CS-C0209180 190 19/22 8 Each $89.05

CS-C0209300 300 19/22 8 Each $97.61

CS-C0204200 200 24/40 10 Each $93.27

CS-C0204250 250 24/40 10 Each $99.55

CS-C0204300 300 24/40 10 Each $102.81

CS-C0204400 400 24/40 10 Each $107.58

CS-C0204500 500 24/40 10 Each $108.08


CONDENSER



136.Condenser, Dewar, Micro, 105°With a standard taper top outer joint and a bottom inner joint, side Joint is at 105° angle.

137.Condenser, Dewar, Micro, 180°Side Joint is at 90° angle.

Cat no. Inside Depth (mm) I.D. (mm) Joints Pack Type Price/Each (CAD)

CS-C0281014 90 31 14/20 Each $105.75

CS-C0281031 120 31 14/20 Each $123.03

CS-C0281019 90 31 19/22 Each $107.46

CS-C0281931 120 31 19/22 Each $124.82

CS-C0282440 200 40 24/40 Each $170.49

CS-C0282450 250 50 24/40 Each $205.52

CS-C0282475 350 75 24/40 Each $227.25

Cat no. Inside Dept (mm) I.D. (mm) Joints Pack Type Price/Each (CAD)

CS-C0341014 90 31 14/20 Each $105.11

CS-C0341031 120 31 14/20 Each $123.03

CS-C0341019 90 31 19/22 Each $107.46

CS-C0341931 120 31 19/22 Each $124.82

CS-C0342440 200 40 24/40 Each $170.49

CS-C0342450 250 50 24/40 Each $205.52

CS-C0342475 350 75 24/40 Each $227.25


135.Condenser, Liebig, Removable Hose ConnectionsWith joints at the top and bottom.



CS-C0501120 120 14/20 8 Each $88.20

CS-C0509180 190 19/22 8 Each $92.81

CS-C0509300 300 19/22 8 Each $97.41

CS-C0504200 200 24/40 10 Each $94.02

CS-C0504250 250 24/40 10 Each $97.83

CS-C0504300 300 24/40 10 Each $100.91

CS-C0504400 400 24/40 10 Each $101.70

CS-C0504500 500 24/40 10 Each $109.57

CRUCIBLEPORCELAIN-HIGH FORM


138.Porcelain Crucible CoversFor use High form Porcelain Crucibles.

Cat no. Capacity (mL) Cover (I.D) Pack Qty Price/Pack (CAD)

CS-C0H01034 10 34 6 $67.80

CS-C0H01538 15 38 6 $67.92

CS-C0H03045 30 45 6 $68.52

CS-C0H04054 40 54 6 $139.80

CS-C0H05054 50 54 6 $139.92

CS-C0H10066 100 66 6 $76.44

139.High-Form Porcelain CruciblesWithstand temperatures up to 1150°C.

Cat no. Capacity (mL) Dia x H for Crucible (mm) Pack Qty Price/Pack (CAD)

CS-C013110H 10 31 x 26 6 $35.40

CS-C013515H 15 35 x 29 6 $37.20

CS-C014330H 30 43 x 37 6 $41.88

CS-C015040H 40 50 x 40 6 $61.80

CS-C015350H 50 53 x 43 6 $63.30

CS-C016500H 100 65 x 54 6 $80.40

141.Low(Wide)-Form Porcelain Crucibles Withstand temperatures up to 1150°C.

Cat no. Capacity (mL) Dia x H for Crucible (mm) Pack Type Price/Pack (CAD)

CS-C013208L 8 32 x 20 6 $42.12

CS-C014117L 17 41 x 26 6 $43.50

CS-C015030L 30 50 x 31 6 $53.40

CS-C016150L 50 61 x 37 6 $69.60

CS-C017600L 100 76 x 46 6 $79.20

CS-C018450L 150 84 x 52 6 $85.92

CRUCIBLEPORCELAIN-LOW(WIDE) FORM

65

140.Porcelain Crucible CoversFor use Low form Porcelain Crucibles.

Cat no. Capacity Cover (I.D) Pack Type Price/Pack (CAD)

CS-C0L00834 8 34 6 $67.80

CS-C0L01747 17 47 6 $69.00

CS-C0L03054 30 54 6 $139.80

CS-C0L05066 50 66 6 $77.10

CS-C0L10080 100 84 6 $81.90

CS-C0L15090 150 90 6 $113.94


CRUCIBLEFUSED QUARTZ-OPAQUE


142.Silica Crucible Without LidHeat resistance up to 1000° C.


519.303.01 15 6 $516.66

519.303.02 25 6 $562.44

519.303.03 50 6 $654.00

519.303.04 80 6 $810.96

519.303.05 100 6 $948.30

519.303.06 150 6 $1,177.20

519.303.07 200 2 $479.60


518.303.01 15 6 $588.60

518.303.02 25 6 $660.54

518.303.03 50 6 $752.10

518.303.04 80 6 $882.90

518.303.05 100 6 $1,013.70

518.303.06 150 6 $1,242.60

518.303.07 200 2 $475.24

143.Silica Crucible With LidHeat Resistance up to 1000° C.

144.Silica BasinsWith spout, round bottom, translucent, stands up to 1000° C.

Catalogue No. Capacity (mL) Pack Type Price/Pack (CAD)

520.303.01 20 6 $562.44

520.303.03 45 6 $654.00

520.303.04 70 6 $810.96

520.303.05 85 6 $850.20

520.303.06 100 6 $948.30

520.303.08 200 2 $446.90

145.Quartz Crucibles Without Lids

146.Quartz Crucible Lids


Height(mm)

Outside Top Diamter for

Crucible (mm)

Outside Bottom

Diamter for Crucible (mm)

Inside Top Diamter for Lid (mm)

Pack Type

Price/Each (CAD)

521.303.01 10 30 29 15 31 Each $79.86

521.303.02 15 35 33 16 34 Each $82.05

521.303.03 20 38 36 18 38 Each $84.09

521.303.04 30 38 43 22 45 Each $92.00

521.303.05 50 51 51 26 53 Each $112.00

521.303.06 100 66 62 31 64 Each $134.23

521.303.07 150 82 79 48 82 Each $204.00


Inside Top Diamter for

Lid (mm)

Side Length (mm) Pack Type Price/Each

(CAD)

522.303.01 10 31 6 Each $104.74

522.303.02 15 34 6 Each $110.46

522.303.03 20 38 10 Each $122.49

522.303.04 30 45 10 Each $127.63

522.303.05 50 53 10 Each $140.35

522.303.06 100 64 10 Each $159.14

521.303.07 150 82 10 Each $200.98

CRUCIBLEFUSED QUARTZ-CLEAR


CRUCIBLEGOOCH


147.Crucible, Gooch Type, With Sintered DiscCrucible suitable for precipitates to be dried to a constant weight 110 ºC. At higher temperatures, heating in an electric furnace is advised and crucibles should not be removed until the temperature has been reduced to about 250 º C. Exposure to sudden temperature changes should be avoided.

Catalogue No. Capacity (mL) Porosity Pack Type Price/Pack (CAD)

255.202.01M 15 M 6 $169.75

255.202.02M 30 M 6 $186.82

255.202.02C 30 C 6 $176.38

255.202.02F 30 F 6 $207.68

255.202.03M 50 M 6 $245.80

255.202.03C 50 C 6 $264.58

255.202.03F 50 F 6 $317.49

149.Nessler CylinderTLG® Nessler cylinder for colour comparision, Class A, Graduated, Flat Bottom.

150.Tap Density CylinderFunnel top graduated cylinder with hex base.

CYLINDERS


Sub Division (mL)

Tolerance (±) mL. Qty/Pk. Qty/Cs. Price/Pack

(CAD)

143.202.01 50 25 to 50 ±0.4 2 10 $70.00

143.202.02 100 50 to 100 ±0.8 2 10 $84.00


141.202.01 100mL 2 $192.00

141.202.02 250mL 2 $240.00

148.Cylinders, To Deliver, Single Metric Scale, With Bumper Guard, Plastic Hexagonal Base Calibrated to deliver. Made from borosilicate 3.3 Glass in heavy duty construction, reinforced top bead and with pour spout. Bumper guards are supplied from 25mL through 100mL. The 10mL has funnel top to facilitate pouring.


Graduated Interval

(mL)

Sub Division

(mL)

Approx. Height (mm)

Qty/Pk.

Qty/Cs.

Price/Pack (CAD)

137.202.02 10 0.4 to 20 0.2 132 6 24 $43.38

137.202.03 25 1 to 25 0.5 138 6 24 $47.28

137.202.04 50 2 to 50 1.0 175 6 24 $52.92

137.202.05 100 2 to 100 1.0 248 6 24 $69.12


CYLINDERS

151.Cylinders, To Deliver (TD) Class A, White Scale, With Double Metric Graduations, BumperTLG® cylinder with reverse metric scale. the “TD” (To Deliver) appears on each cylinder. Calibrated at 20°C. Flat hexagonal for added stability made from Borosilicate 3,3 Glass. They can be repeatedly used without drying. Bumpers are supplied with sizes 25 through 2000mL. designed from ASTM Specification E1272, Style 1, Class A requirements. Comes with LOT Calibration Certificate.


Graduated Interval

(mL)

Sub Division (mL)

Tolerance (±) mL

Approx. Height (mm)

Qty/Pk. Qty/Cs. Price/Pack (CAD)

138.202.02TD 10 1 to 10 0.1 ±0.09 165 2 24 $55.26

138.202.03TD 25 2 to 25 0.2 ±0.17 195 2 24 $59.40

138.202.04TD 50 3 to 50 1.0 ±0.25 190 2 24 $59.98

138.202.05TD 100 5 to 100 1.0 ±0.40 255 2 24 $70.40

138.202.06TD 250 10 to 250 2.0 ±0.80 330 2 24 $96.28

138.202.07TD 500 25 to 500 5.0 ±1.30 375 2 12 $135.18

138.202.08TD 1000 50 to 1000 10.0 ±2.50 460 1 12 $95.73

138.202.09TD 2000 100 to 2000 20.0 ±6.00 520 1 6 $156.16


152.Cylinders, To Contain (TC) Class A, White Scale,With Double Metric Graduations, BumperTLG® cylinder with reverse metric scale. The “TC” (To Contain) appears on each cylinder. Calibrated at 20°C. Flat Hexagonal for added stability made from Borosilicate 3.3 Glass. Bumpers are supplied with sizes 25 through 2000mL. Designed with ASTM Specification E1272, Style 1, Class A requirements. Comes with a LOT Calibration Certificate.

CYLINDERS


Graduated Interval

(mL)

Sub Division (mL)

Tolerance (±) mL

Approx. Height (mm)


138.202.02TC 10 1 to 10 0.1 ±0.08 165 2 24 $55.26

138.202.03TC 25 2 to 25 0.2 ±0.14 195 2 24 $59.40

138.202.04TC 50 3 to 50 1.0 ±0.20 190 2 24 $59.98

138.202.05TC 100 5 to 100 1.0 ±0.35 255 2 24 $70.40

138.202.06TC 250 10 to 250 2.0 ±0.65 330 2 24 $96.28

138.202.07TC 500 25 to 500 5.0 ±1.10 375 2 12 $135.18

138.202.08TC 1000 50 to 1000 10.0 ±2.00 460 1 12 $95.73

138.202.09TC 2000 100 to 2000 20.0 ±6.00 520 1 6 $156.16


CYLINDERS

153.Cylinders, To Deliver (TD) Class A, White Scale, With Single Metric Graduations, BumperTLG® cylinder with single metric scale. the “TD” (To Deliver) appears on each cylinder. Calibrated at 20°C. Flat hexagonal for added stability made from Borosilicate 3.3 Glass. They can be repeatedly used without drying. Bumpers are supplied with sizes 25 through 2000mL. Designed from ASTM Specification E1272, Style 1, Class A requirements. Comes with LOT Calibration Certificate.


Graduated Interval

(mL)

Sub Division (mL)

Tolerance (±) mL

Approx. Height (mm)


139.202.01TD 5 0.5 to 5 0.1 ±0.05 - 2 24 $55.26

139.202.02TD 10 1 to 10 0.1 ±0.09 165 2 24 $55.26

139.202.03TD 25 2 to 25 0.2 ±0.14 195 2 24 $59.40

139.202.04TD 50 3 to 50 1.0 ±0.25 190 2 24 $59.98

139.202.05TD 100 5 to 100 1.0 ±0.40 255 2 24 $70.40

139.202.06TD 250 10 to 250 2.0 ±0.80 330 2 24 $96.28

139.202.07TD 500 25 to 500 5.0 ±1.30 375 2 12 $135.18

139.202.08TD 1000 50 to 1000 10.0 ±2.50 460 1 12 $95.73

139.202.09TD 2000 100 to 2000 20.0 ±6.00 520 1 6 $156.16


154.Cylinders, To Contain (TC) Class A, White Scale, With Single Metric Graduations, BumperTLG® cylinder with single metric scale. The “TC” (To Contain) appears on each cylinder. Calibrated at 20°C. Flat Hexagonal base for added stability made from Borosilicate 3.3 glass. Bumpers are supplied with sizes 25 through 2000mL. designed with ASTM Specification E1272, Style 1, Class A requirements. Comes with a LOT Calibration Certificate.

CYLINDERS



Sub Division (mL)

Tolerance (±) mL

Approx. Height (mm) Qty/Pk. Qty/Cs. Price/Pack

(CAD)139.202.01TC 5 0.5 to 5 0.1 ±0.04 - 2 24 $55.26

139.202.02TC 10 1 to 10 0.1 ±0.08 165 2 24 $55.26

139.202.03TC 25 2 to 25 0.2 ±0.14 200 2 24 $59.40

139.202.04TC 50 3 to 50 1.0 ±0.20 191 2 24 $59.98

139.202.05TC 100 5 to 100 1.0 ±0.35 255 2 24 $70.40

139.202.06TC 250 10 to 250 2.0 ±0.65 330 2 24 $96.28

139.202.07TC 500 25 to 500 5.0 ±1.10 375 2 12 $135.18

139.202.08TC 1000 50 to 1000 10.0 ±2.00 460 1 12 $95.73

139.202.09TC 2000 100 to 2000 20.0 ±6.00 520 1 6 $156.16


CYLINDERS

155.Cylinders, To Contain (TC) Class A, White Scale, Mixing, Single Metric Scale TLG® mixing cylinder, single metric scale and comes with durable white ceramic enamel. The “TC” (To Contain) appears on each cylinder. Calibrated at 20°C. Flat Hexagonal base for added stability. A glass stopper is supplied comes with a LOT Calibration Certificate. ASTM specification E1272, style 2, Class A requirement.



Sub Division (mL)

Tolerance (±) mL Stopper Approx.

Height (mm) Qty/Pk. Qty/Cs. Price/Each (CAD)

140.202.02TC 10 1 to 10 0.1 ±0.08 9 170 2 6 $80.00

140.202.03TC 25 2 to 25 0.2 ±0.14 13 215 2 6 $90.00

140.202.04TC 50 3 to 50 1.0 ±0.20 16 195 2 6 $110.00

140.202.05TC 100 5 to 100 1.0 ±0.35 22 255 2 6 $132.00

140.202.06TC 250 10 to 250 2.0 ±0.65 27 330 1 1 $90.00

140.202.07TC 500 25 to 500 5.0 ±1.10 32 380 1 1 $115.90

140.202.08TC 1000 50 to 1000 10.0 ±2.00 32 475 1 1 $160.90



156.Distilling Bulb, KugelrohrUsed in distillation of very small amount of distillate at lower temperature with high efficiency. Kugelrohr machine required but not supplied. For the vacuum adapter, see CS-A0301420.

157.Weighing FunnelBorosilicate glass funnel with tapered poring neck for micro transferring of solid and liquid, flat bottom keep funnel from while weighing. To be used as weighing dish and sample transfer funnel.

158.Dessicator With Lid, PlainDie pressed, Neutral Glass with Porcelain perforated plate.

DISH - DISTILLATION

Cat no. Capacity (mL) Joints Bulb O.D.

(mm)Overall

Height (mm)Pack Type

Price/Each (CAD)

CS-D0281005 5 14/20 25 80 Each $48.76

CS-D0281010 10 14/20 31 85 Each $51.08

CS-D0281015 15 14/20 35 90 Each $53.80

CS-D0281025 25 14/20 42 98 Each $57.21

CS-D0281050 50 14/20 48 105 Each $61.97

CS-A0301420 14/20 vacuum adapter with 8mm hose connection Each $21.00

Cat no. Capacity (mL) Pack Type Price/Pack(CAD)

245.202.01 3 5 $100.00

245.202.02 6 5 $115.00

245.202.03 10 5 $125.00

Cat no. I.D. (mm) Pack Type Price/Each(CAD)

249.202.01 150 Each $250.00

249.202.02 250 Each $340.00

249.202.03 300 Each $435.00


DISH - DISTILLATION

160.Dishes, Crystallizing, Without SpoutThe rims on these dishes are reinforced and fire polished to reduce chipping. Will withstand repeated sterilization (wet or dry). Ideal for storage and crystallization.

159.Dessicator With Lid, VacuumDie pressed, Neutral Glass with Porcelain perforated plate and glass sleeve.

Cat no. I.D. (mm) Pack Type Price/Each(CAD)

250.202.01 150 Each $275.00

250.202.03 250 Each $374.00

250.202.04 300 Each $478.50

Cat no. Capacity (mL) O.D. x Height (mm) Qty/Pk.

Qty/Cs.

Price/Pack (CAD)

246.202.04 180 70 x 50 6 24 $113.88

246.202.05 180 80 x 40 6 24 $111.23

246.202.06 270 90 x 50 6 18 $121.37

246.202.06A 325 100 x 50 6 18 $147.73

246.202.07 740 125 x 65 4 12 $212.37

246.202.08 1200 150 x 75 4 8 $263.43

246.202.09 1770 180 x 90 2 8 $168.38

246.202.10 2500 200 x 100 2 6 $176.44





161.Distillation Cow ReceiverDesigned for micro scale application. With one female joint and four drip-tip male joints.

162.Distilling Receiver, Graduated, With HooksCentrifuge tube shaped receiver with an upper standard taper joint has two glass hooks 180° apart.

163.Distilling, Cow Receiver GraduatedTubes are graduated from 0 to 3mL in 0.2mL subdivisions.

DISTILLATIONRECEIVER


CS-D0161420 14/20 Each $106.65

CS-D0161922 19/22 Each $110.99

CS-D0162440 24/40 Each $157.04

Cat no. Joints Capaticy (mL) Pack Type Price/Each(CAD)

CS-T0230012 14/20 12 Each $32.46

CS-T0230015 14/20 15 Each $33.58

CS-T0239012 19/22 12 Each $34.70

CS-T0239015 19/22 15 Each $35.82

Cat no. Joints Pack Type Price/Each(CAD)

CS-D0351403 14/20 Each $121.92


DISTILLATION RECEIVER



164.Distilling Receiver, With Hose ConnectionCow-type design having three receivers spaced 40° apart. 105° angle between top outer joint and lower inner joints.

165.Distillation Receiving Set, With Rotating cowRotating cow receiver allows four flasks to be progressively filled.


CS-D0191420 14/20 Each $91.68

CS-D0191922 19/22 Each $94.93

CS-D0192440 24/40 Each $102.99

Cat no. Item Type Joints Pack Type Price/Each (CAD)

CS-A0551420 Vacuum Adapter 14/20 Each $42.82

CS-D0201414 Cow Receiver 14/20 Each $106.65





Accessories





Round Bottom Flask with other joints are available upon request.


166.Distribution Receiver, Vertical OrientationRotating distillation receiver allows four fractions to be collected. Vacuum adapter has a vertical orientation.

167.Distillation Receiver/Moisture Determination Apparatus, Dean & StarkFor easy separation of water from reaction or distillation system. Graduated with 2mm Teflon® stopcock or 2mm glass stopcock. With standard round bottom flask 250mL of 24/40 socket joint.

168.Distillation Receiver - Clevenger ApparatusFor Determination of volatile oil comprising with 1000mL Round Bottom Flask, 24/40 Socket.

DISTILLATIONRECEIVER

Cat no. Item Type Joints Pack Type Price/Each (CAD)



Accessories


Old Cat no. Capacity (mL) Pack Type Price/Each (CAD)

224.202.01 2 Each $280.00

224.202.02 5 Each $310.00

224.202.03 10 Each $345.00

224.202.04 25 Each $389.00

Old Cat no. Description Pack Type Price/Each (CAD)

227.202.01Clevenger Apparatus for determination of volatile oil

lighter than water comprising of 1000 mL flask, oil separatory tube and condeser.

Each $500.00


DISTILLATIONHEAD




169.Distillation Head, Vigreux, MicroDistillation head with condenser sealed to a Vigreux column. Vacuum adapter has an outer joint and accepts a distribution adapter (CS-D0201414). To be used with a 25mm immersion thermometer.

170.Distillation Head, Jacketed, Vigreux, MicroSimilar to CS-D014 but with the Vigreux column vacuum jacketed to improve distillation performance. To be used with CS-D0201414 distribution adapter.

171.Distillation Head, Vigreux, JacketedVacuum jacketed Vigreux distillation head having a sealed condenser, braced for strength. Vacuum adapter has an inner joint and a sealed in drip tip. To be used with a 25mm immersion thermometer.

Cat no. Joint Size Thermometer Joint

Approx Height x Width (mm) Pack Type Price/Each

(CAD)CS-D0141014 14/20 10/18 195 × 185 Each $222.85

Cat no. Joint Size Thermometer Joint

Approx Height x Width (mm) Pack Type Price/Each

(CAD)CS-D0171014 14/20 10/18 195 × 190 Each $329.87

Cat no. Joint Size

Column Height (mm)

Thermometer Joint

Approx Height x

Width (mm)

Pack Type

Price/Each (CAD)

CS-D0211100 14/20 100 10/18 200 × 180 Each $343.07

CS-D0211150 14/20 150 10/18 250 × 180 Each $352.30

CS-D0214200 24/40 200 10/18 325 × 350 Each $407.55

CS-D0214300 24/40 300 10/18 425 × 350 Each $417.17



172.Distillation Head, Micro scaleWith 2mm glass stopcock and 24/40 joint. Supplied with a special 25mL long-neck flask for a small volume efficiency.

DISTILLATIONHEAD

Cat no. Joints Hose O.D. (mm) Pack Type Price/Each

(CAD)CS-D0112440G 24/40 8 Each $103.10


DISTILLATIONAPPARATUS



173.Drying Chamber, AbderhaldenDrying samples for elemental analysis. Sample is placed in a vial which is placed into drying chamber. Under vacuum and gentle heat created by refluxing in outer jacket of low boiling point solvents.

174.Desiccant FlaskChoice of either glass or Teflon® stopcock.

Cat no. Upper Joint Lower Joint Drying Chamber Joint Pack Type Price/Each

(CAD)CS-D0222434 24/40 24/40 34/45 Each $234.08

Cat no. Joints Stopcock Pack Type Price/Each (CAD)

CS-D0133424G 34/45 2mm (Glass) Each $102.90

CS-D0133424 34/45 2mm (PTFE) Each $107.44

82


* Burner, Retort Stand and Clamps are not supplied.

Old Cat no. Capacity (mL) Pack Type Price/Each (CAD)

226.202.01 5 Each $500.00

226.202.02 10 Each $590.00

176.Alcohol Determination - Distillation Apparatus <611>


CS-AD000611 Complete Each $435.00

Parts:

Stillhead Splash Vertical 24/40Inland Revenue Condenser unit 24/40Extension fitting 125mm 24/40Receiver/Adapter - Straight 24/40Flat Bottom flask 500mL 24/40Keck Clip KC24 24/40 (Green)Glass Boliing beads - 50g.

175.Essential Oil Determination Apparatus (Clevenger Type)Vertical tube combined with condenser and measuring tube with stopcock. A return tube for the aqeous apart of the distillate connects the bottom of the measuring tube and the vertical tube. With 1000mL Round Bottom Flask of 24/40 Socket.



83

177.Hydroxypropoxy Determination ApparatusComplete apparatus as described in USP 23-NF 18(421) for hydroxypropoxy group determinations. The apparatus includes a 125 mL conical bottom flask with a 24/40 outer joint, thermocouple well and an inlet with a 1.0mm capillary tip for nitrogen and water, a distillation head, condenser head and condenser. A 250 mL Erlenmeyer flask is supplied as a receiver.


CS-F06606-1 Conical boiling flask, 24/40 joint, 125 mL Each $380.00

CS-F06606-2 Distillation head, 24/40, 12/5 Each $123.17

CS-F06606-3 Condenser head, 12/5, 19/38 Each $131.72

CS-F06606-4 Graham Condenser, 250mm, 19/38 Each $169.32

CS-F06606-5 Erlenmeyer Flask, 250 mL Each $22.72

178.Regular Sulphite/Cyanide Distillation Apparatus TLG®

This cyanide distilling apparatus is used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by reflux distillation and absorbed in a scrubber containing sodium hydroxide solution. The cyanide ion in the absorbing solution is then determined colorimetrically or by volumetric titration. Apparatus Meets EPA and ASTM requirements. Designed for sample size of 500 mL.


Cat no. Description Pack Type

Price/Each (CAD)

CS-A050G1938 Inlet Tube, joint 19/38 (PART A) Each $39.37

CS-C021607-B Reflux condenser, 24/40 lower joint, 45/50 upper joint, 19/38 side joint (PART B) Each $230.01

CS-C021607-C Cold Finger condenser, Joint 45/50 (PART C) Each $192.03

CS-T021607-D Dispersion Tube, Medium Porosity, 19/38 side joint, 29/42 lower joint (PART D) Each $177.16

CS-T021607-E Receiver tube 29/42 joint (PART E) Each $78.02

CS-F021607-F Flask, 1000mL, 24/40 joint center neck, 19/38 joint side neck (PART F) Each $132.02



CS-A050G1938 Inlet Tube Joint 19/38 (PART A) Each $39.37

CS-R010607-B Reflux body, 19/38 joint lower and side, joint 29/42 upper (PART B) Each $188.28

CS-C010607-C Cold finger condenser, joint 29/42 (PART C) Each $154.72

CS-F010607-D Flask, 19/38 center and side joint necks, 1000 mL (PART D) Each $163.30

CS-A010607-E House adapter, socket joint 18/9 (PART E) Each $59.04

CS-T010607-F Scrubber Tube, 19/38 side joint and 29/42 lower joint (PART F) Each $293.79

CS-F010607-G Scrubber Flask Joint 29/42 (PART G) Each $150.00

CS-A010607-H Absrober joint 29/42 flask (PART H) Each $150.00

CS-T010607-I Dispersion tube 18/7 upper joint and 29/42 lower joint (PART I) Each $293.79

Clamp Clamp size joint 18/9 (2 supplied) 12 $20.63

179.Cyanide Distillation Apparatus with Two Bubbler 19/38 Joint

This cyanide distilling apparatus is used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by reflux distillation and absorbed in a scrubber containing sodium hydroxide solution. The first bubbler acts as a scrubber to remove sulfides. Cyanide is absorbed in the second bubbler.



CS-A010607-A Head, 29/42 lower joint, 14/20 upper joint (PART A) Each $194.93

CS-C010607-B Cold Finger condenser, 14/20 joint, #1 Hose Connection. (PART B) Each $117.94

CS-T010607-C Dispersion tube, Coarse porosity, 29/42 joint, #1 Hose connection. (PART C) Each $219.87

CS-T010607-D Tube 29/42 joint Capacity 50mL (PART D) Each $83.83


CS-T010607-D Tube Capacity 50mL, 29/42 joint (Part A) Each $83.83

CS-MA714D-02 Distilling head, 3" (Part B) Each $285.90

CS-MA714D-03 Distilling head, 4.5" (Part B) Each $285.90

CS-MA714A-04 Anti-siphon adapter (Part C) Each $116.10

180.Components for Midi-Cyanide Distillation Apparatus (Midi VAP® 3000)This cyanide distilling apparatus is used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by reflux distillation and absorbed in a scrubber containing sodium hydroxide solution. Used with 50 mL or less of aqueous samples. Purge tube capacity is 50mL.

181.Components for Midi-Ammonia Distillation Apparatus (Midi VAP® 3000)



D

DISTILLATION APPARATUS

Cat no. Flask Cap. (mL)

Funnel Cap. (mL)

Hose Connection Joints Approx. Overall H x W

(mm) Pack Type Price/Each (CAD)

CS-MW513800 1000 250 #2 24/40 595 x 300 Each $770.91

183.Monier-Williams Sulfites Distillation Apparatus (Sulpher Dioxide Test Appratus)

182.Components for Midi-Phenol Distillation Apparatus (Midi VAP® 3000)

Apparatus is used for the determination of sulfites in food and related products. Assembly consists of a three neck 1000mL boiling flask with Allihn condenser and a right angle inlet adapter with a bubbler tube. Remaining components are a right angle hose connection adapter and a special 24/40 outlet adapter with a double bend. To ensure a complete seal during the analysis, each joint should be clamped. Five clamps are supplied with the complete apparatus.


CS-T010607-D Tube Capacity 50mL, 29/42 joint (Part A) Each $83.83

CS-MP714D-02 Distilling head, 3" (Part B) Each $285.90

CS-MP714D-03 Distilling head, 4.5" (Part B) Each $285.90

CS-S0401420 Pennyhead Stopper, 14/20 joint (Part C) Each $12.90


D

184.Nitrogen Determination (Kjeldahl) Assembly


Convenient assembly of Borosilicate 3.3 glassware for Kjeldahl digestions and distillations. Flask can be used alone for digestion stage and then fitted to rest of assembly for the distillation process. Manufactured from heat resistant and chemically durable borosilicate glass.

Parts:

A : Kjeldhal flask B : Adapter Claisen with long tube C : funnel for alkaline solution D : Adapter,Kjeldhal Trap E : Condenser F : Delivery Adapter Straight


CS-NI-300 Complete assembly having 300 ML KJELDHAL FLASK Each $790.00




EVAPORATION APPARATUS



185.Rotary, Evaporator, Bump Trap Anti ClimbTrap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.

186.Adapter, Distillation TrapAdapter is placed above flask to prevent carry-over of reactions which have a tendency to foam.

Cat no. Top Joints Bottom Joints Capacity(mL) Pack Type Price/Each (CAD)

CS-A0272414 24/40 14/20 100 Each $91.79

CS-A0272419 24/40 19/22 100 Each $94.04

CS-A0272424 24/40 24/40 100 Each $94.03

CS-A0272250 24/40 14/20 250 Each $94.03

CS-A0272950 24/40 19/22 250 Each $97.33

CS-A0274250 24/40 24/40 250 Each $97.95

Cat no. Upper Joints Lower Joints Capacity(mL) Pack Type Price/Each (CAD)

CS-A0262414 24/40 14/20 100 Each $55.00

CS-A0262419 24/40 19/22 100 Each $56.00

CS-A0264100 24/40 24/40 100 Each $57.00



187.Rotary, Evaporator, Bump Trap, Anti-SplashThis design prevents possible contamination from rotary evaporatory.


CS-A0282414 24/40 14/20 100 Each $87.32

CS-A0282419 24/40 19/22 100 Each $88.44

CS-A0282424 24/40 24/40 100 Each $88.44

CS-A0281250 24/40 14/20 250 Each $87.88

CS-A0289250 24/40 19/22 250 Each $89.10

CS-A0284250 24/40 24/40 250 Each $90.67


188.Rotary, Evaporator, Bump Trap, Anti-Splash With Fritted DiscSimilar to CS-A028 except with extra coarse fritted disc sealed above lower inner joint. Frit reduces foam from being carryover.



CS-A0232414 24/40 14/20 100 Each $131.10

CS-A0232419 24/40 19/22 100 Each $131.88

CS-A0232424 24/40 24/40 100 Each $132.66

CS-A0231250 24/40 14/20 250 Each $134.55

CS-A0239250 24/40 19/22 250 Each $134.55

CS-A0234250 24/40 24/40 250 Each $134.55





189.Rotary, Evaporator, Bump Trap Anti-Splash, ModifiedWith two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.


CS-A0602414 24/40 14/20 100 Each $89.78

CS-A0602419 24/40 19/22 100 Each $90.90

CS-A0602424 24/40 24/40 100 Each $90.90

CS-A0601250 24/40 14/20 250 Each $90.34

CS-A0609250 24/40 19/22 250 Each $91.95

CS-A0604250 24/40 24/40 250 Each $93.14




190.Condenser, For Soxhlet ExtractorsAllihn reflux condenser with a water cooled inner drip joint at bottom.

191.Extractor, SoxhletExtractor body only.

192.Extractor, Liquid-Liquid, ContinuousStopcock stops the flow after the extraction is complete. For samples of one liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered separately.

Cat no. Upper Joints Lower Joints Pack Type Price/Each (CAD)

CS-E0103424 34/45 24/40 Each $91.79

CS-E0104524 45/50 24/40 Each $120.90

CS-E0105550 55/50 24/40 Each $243.49


CS-E0120200 Extractor, 45/50 top-24/40 bottom Each $276.83

Cat no. Jacket Length (mm) Joints Overall Height


CS-C0243445 190 34/45 275 Each $109.60

CS-C0244500 260 45/50 365 Each $145.53

CS-C0245550 300 55/50 405 Each $169.98

EXTRACTOR, SOXHLET


FILTRATION APPARATUS


193.Microfiltration Apparatus, 47 mm All-Glass, with Fritted Glass Support BaseThis assembly uses a standard taper 40/35 joint to connect the support base to the filtering flask; complete assembly includes a graduated funnel, aluminum clamp, support base and filtering flask.


Price/Each (CAD)

258.202.01

COMPLETE SET Price/Each HAVING

Each $470.47

• Glass Funnel, 47 mm, 300 mL ( PART NO 1)

• Aluminum Clamp (PART NO 2)

• Fritted Glass Support Base, 47 mm, 40/35 ( PART NO 3)

• Aluminum Clamp (PART NO 2) Flask 1000 mL 40/35 (PART NO 4)

258.202.02


Each $662.22




• Vacuum Flask with Conical Bottom 2000 ML 40/35 (PART NO 4)

258.202.03


Each $767.00




• Vacuum Flask with Conical Bottom 5000 ML 40/35 (PART NO 4)

Parts Price


Price/Each (CAD)

258.245.01 Glass Funnel, 47 mm, 300 mL (PART NO 1) Each $88.08

258.245.01A Glass Funnel, 47 mm, 1000 mL (PART NO 1) Each $179.88

258.245.02 Aluminum Clamp (PART NO 2) Each $96.78

258.245.03 Fritted Glass Support Base, 47 mm, 40/35 (PART NO 3) Each $260.86

258.245.04 Vacuum Flask 1000ML 40/35 joint (PART NO 4) Each $160.11

258.245.06 Vacuum Flask with Conical Bottom 2000ML 40/35 (PART NO 4) Each $287.58

258.245.07 Vacuum Flask with Conical Bottom 5000 ML 40/35 (PART NO 4) Each $371.94

194.Microfiltration Assembly, 47 mm, with Glass Support, with Silicone StopperComplete assembly includes a graduated funnel, aluminum clamp, support base and silicone stopper. Useful for bacteriological analysis water (using 47mm sterile membrane filters). Analysis of suspended solids in water (Using 47mm depth funnel).


Price/Each (CAD)

260.202.01


Each $225.41

• Glass Funnel, 47 mm, 300 mL (PART NO 1)

• Anodized Aluminum Clamp, 47 mm (PART NO 2)

• Fritted Glass Support Base,47mm (PART NO 3)

• No. 8 Silicone Stopper, 9/16" (14.3 mm) Hole (PART NO 4)

Parts Price


Price/Each (CAD)


258.245.01A Glass Funnel, 47 mm, 1000 mL (PART NO 1) Each $179.88


260.245.02 Fritted Glass Support Base, 47 mm (PART NO 3) Each $116.25

260.245.05 No. 8 Silicone Stopper, 9/16" (14.3 mm) Hole (PART NO 4) Each $21.88

260.245.04 Filtration Flask,1000 mL(PART NO 5) Each $91.88

260.245.08 Flask,4000 mL(PART NO 5) Each $182.78





195.Microfiltration Assembly, 47 mm, with PTFE-Faced Fritted Glass Support Used when autoclaving with the filter in place. The PTFE coating prevents the membrane from adhering to the ground glass surface. This unit is supplied with a PTFE faced fritted glass support base, PTFE-faced 300 mL graduated funnel, anodized aluminum clamp and a No. 8 silicone stopper.

Cat no. Support Type

Grad. Funnel Capacity (mL)

Filter Size (mm) Pack Type Price/Each

(CAD)261.245.01 PTFE-Faced 300 47 Each $326.84

Component Parts

Accessories


Price/Each (CAD)

261.245.01 PTFE-Faced Glass Funnel, 47 mm, 300 mL (PART NO 1) Each $124.61

258.245.02 Anodized Aluminum Clamp, 47 mm (PART NO 2) Each $96.78

261.245.03 PTFE-Faced Fritted Glass Support Base, 47 mm (PART NO 3) Each $215.81



Price/Each (CAD)

260.245.04 Filtration Flask, 1000 mL Capacity, No. 8 Stopper Joint (PART NO 5) Each $91.88



95

196.Microfiltration Assembly, 47 mm, with Stainless Steel Support Used for filtering viscous or proteinaceous solutions or to produce ultra clean filtrate. This unit is supplied with a 316 stainless steel support screen, PTFE support screen gasket, glass support base, 300 mL graduated funnel, anodized aluminum clamp and a No. 8 silicone stopper.

Cat no. Type Grad. Funnel Capacity (mL)

Filter Size (mm) Pack Type Price/Each

(CAD)262.202.01 Stainless 300 47 Each $267.39

With Stainless Steel Support

Component Parts

Accessories


Price/Each (CAD)



262.245.03 Stainless Steel Support Screen, 47 mm (PART NO 3) Each $226.24

262.245.04 PTFE Support Screen Gasket, Pkg./25, (1 Supplied) (PART NO 4) 25 $85.62

262.245.05 Glass Support Base, 47 mm (PART NO 5) Each $91.90



Price/Each (CAD)

260.245.01A Glass Funnel, 47 mm, 1000 mL Capacity (PART NO 1) Each $179.88






197.Microfiltration Assembly, 25 mm, with Fritted Glass SupportComplete assembly includes a graduated funnel, aluminum clamp, support base and silicone stopper.

Spare Parts


Price/Each (CAD)

259.245.01 Glass Funnel, 25 mm, 15 mL capacity (PART NO 1) Each $68.29


259.245.02 Fritted Glass Support Base, 25 mm (PART NO 3) Each $101.40


259.245.04 Vacuum Filtering FLASK 125 mL (PART NO 5) Each $45.30


Price/Each (CAD)

259.202.01


Each $212.87

• Funnel cup 15 mL (PART NO1)

• Anodized Clamp (PART NO 2)

• 25mm membrane (PART NO 3)

• Silicon stopper (PART NO 4)

198.Microfiltration Assembly, 25 mm, with Stainless Steel Support

The 25 mm vacuum microfiltration assemblies are designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. The funnel is graduated from 5 to 15 mL in 1 mL increments. Connection to our 125 mL filtration flask is made with a No. 5 silicone stopper.


Price/Each (CAD)

259.202.03

COMPLETE SET PRICE HAVING

Each $245.30

• Funnel cup 15 mL (PART 1)

• Anodized Clamp (PART 2)

• Stainless screen 25mm (PART 3)

• PTFE Support Screen Gasket (PART 4)

•Glass Support Base, 25 mm (PART 5)

• Silicon stopper (PART 6)

Spare Parts


Price/Each (CAD)

259.245.01 Glass Funnel, 25 mm, 15 mL capacity (PART NO 1) Each $68.29


259.245.05 Stainless Steel Support Screen, 25 mm (PART NO 3) Each $102.54

259.245.06 PTFE Support Screen Gasket, Pkg./25 (1 Supplied) (PART NO 4) 25 $45.57

259.245.07 Glass Support Base, 25 mm (PART NO 5) Each $57.15


259.245.04 Vacuum Filtering FLASK 125 mL (PART NO 7) Each $45.30



FILTER PRODUCTSSYRINGE FILTERS

98

The following chart will help you choose the appropriate membrane material for your syringe filter. If you have any questions or are unsure which membrane material is appropriate for your task, please contact us at 1-877-998-9910.



99

Use the information in this table to determine the ability of a specific syringe filter to withstand exposure to a solvent. All concentrations are 100% unless noted.

Syringe Filter Membrane Compatibility

LegendC: Compatible CA: Cellulose Acetate

LC: Limited Compatibility RC: Regenerated CelluloseIC: Incompatible (not recommended) PP: PolypropyleneND: No Compatibility Data Available PA: Polyamide Nylon

PTFE: Polytetrafluorethylene PC: PolycarbonatePVDF: Polyvinylidenefluoride PET: Polyester

PES: Polyethersulfone CME: Cellulose Mixed EsterCN: Cellulose Nitrate

Chemicals Nylon (PA) PTFE PVDF CA RC PP PC PET CME CN PES

AcidsAcetic, Glacial C C C C C C ND C IC IC C

Acetic, 25% IC C C IC IC C C C LC LC CHydrochloric, Concentrated IC C C IC IC C C IC IC IC C

Sulfuric, Concentrated IC C IC IC IC C IC ND IC IC ICSulfuric, 25% IC C C IC LC C ND ND LC IC ND

Nitric Concentrated IC C C IC IC C C LC IC IC ICNitric, 25% IC C C IC IC C ND ND LC LC LC

Phosphoric 25% IC C ND C LC C ND C LC ND NDFormic, 25% IC C ND LC C C ND LC C LC C

Trichloroacetic, 10% IC C ND C C C ND ND ND ND NDAlkalis

Ammonium Hydroxide, 25% C C LC C LC LC IC LC LC IC C

Sodium Hydroxide, 3 Normal C C C IC LC LC IC LC IC IC C

AlcoholsMethanol, 98% C C C C C C C C IC IC CEthanol, 98% C C C C C C C C IC IC CEthanol, 70% LC C C LC C C C C IC IC C

Isopropalnol, n-Propanol C C C C C C LC C C C CAmyl alcohol, Butanol C C C C C C ND C C C C

Benzyl Alcohol C C C LC C C LC ND LC LC ICEthylene glycol C C C C C C C C LC LC C



100

Propylene glycol C C C LC C C ND ND ND ND NDGlycerol C C C C C C ND ND C ND ND

HydrocarbonsHexane, Xylene C C C C C IC C C C C C

Toulene, Benzene C C C C C IC LC C C C CKerosene, Gasoline C C C C C LC LC C C C C

Tetralin, Decalin ND C C C C ND ND ND ND ND NDHalogenated Hydrocarbons

Methylene Chloride LC C C IC C LC ND C ND LC ICChloroform C C C IC C LC IC C C C IC

Trichloroethylene C C C C C LC ND C C C ICMonochlorobenzene,

Freon C C C C C C C ND ND C C

Carbon Tetrachloride C C C LC C LC LC C C C CKetones

Acetone, Cyclohexanone C C IC IC C C IC C IC IC ICMethyl Ethyl Ketone C C LC LC C LC LC ND ND IC IC

Icepropylacetone C C IC C CN D ND ND ND ND ICMethyl Isobutyl Ketone ND C LC ND C LC ND ND ND IC C

EstersEthyl Acetate & Methyl

Acetate C C C IC C LC LC C IC IC IC

Amyl, Propyl, and Butyle Acetate C C ND LC C LC C ND ND IC C

Propylene Glycol Acetate ND C ND IC C C ND ND ND ND ND2-Ethoxyethyl Acetate ND C ND LC C ND ND ND ND ND ND

Methyl Cellosolve Acetate ND C ND IC C C ND ND ND ND NDBenzyl Benzoate C C ND C C ND ND ND ND ND ND

Isopropyl Myristate C C ND C C ND ND ND ND ND NDTricresyl Phosphate ND C ND C C ND ND ND ND ND ND

Oxides - EthersEthyl Ether C C C C C LC C C LC LC C

Dioxane & Tetrahydrofuran C C LC IC C C IC PET IC IC ICDimethylsulfoxide (DMSO) C C IC IC C C IC ND IC IC IC

Isopropyl Ether ND C C C C C C ND ND LC CSolvents with Nitrogen

Dimethyl Formamide LC C IC IC LC C ND C IC IC ICDiethylacetamide C C ND IC C ND ND ND ND ND NDTriethanolamine C C ND C C ND ND ND ND ND ND

Aniline ND C ND IC C ND ND ND ND ND NDPyridine C C C IC C LC IC ND IC IC IC

MiscellaneousPhenol Aqueous, 10% ND C LC IC IC C ND ND IC LC IC

Hydrogen Peroxide, 30% C C ND C C ND ND ND ND ND NDSilicone Oil & Mineral Oil ND C C C C C C C C C C



101

The table below offers general guidelines for membrane charecterstics and compatible applications.

Membrane Characteristics

Membrane ApplicationsMembrane Type Characteristics Applications

Regenerated Cellulose

Hydrophilic membrane with good solvent resistance, extremely low nonspecific

protein binding; compatible with nearly all common HPLC solvents; tolerates

aqueous samples in pH range of 3 to 12.

Membrane of choice for low nonspecific protein binding applications; Tissue Culture media filtration and general

biological sample preparation.

Polyamide (Nylon)

One of the most commonly used membranes; broad compatibility with aqueous and organic solvents, stable

hydrophilic membrane, not suitable for highly acidic samples.

General laboratory filtration; filtration for most samples; HPLC samples. NOTE:

Nylon binds protein, do not use when high protein recovery is desired.

Polytetrafluorethylene (strengh and resistance may be limited by backer

material)

Highly hydrophobic, PTFE membranes are chemically inert to most organic solvents, alkalis and acids. PTFE can

be used as a breather filter for aqueous applications. Can be used with aqueous

solutions only after use of a wetting agent (eg alcohol).

Suitable for filtation of aggressive solvents, bases and acids. Can be used as ventilation

filter.

Polyvinylidenfluoride (hydrophilic version)

Hydrophilic membrane with good solvent resistance; low UV absorbing extractables

and low nonspecific protein binding.

General biological filtration; filtration of samples where high protein recovery is

desired.

Polypropylene

Hydrophobic membrane has wide chemical compatibility with organic

solvents; low non-specific protein binding.

Filtration of organic solvents. Can be used as ventilation filter

Polyethersulfone

Hydrophilic membrane with high flow rates (liquids), low protein binding, low

concentrations of extractable substances.

PES is certified for ion chromatography; tissue culture filtration;

filtration of proteins and nucleic acids.

Mixed Cellulose Ester

Hydrophilic membrane with high flow rate, high protein binding capacity (not

suitable for biological samples). Not suit-able for use with strong acids and alkalis

Ideal for use in general filtration, medical assays, or diagnostic kit manufac-

turing applications.

Cellulose Acetate

Low protein binding, ideal for aqueous based samples; high protein recovery from filtrate; lower protein binding

compared to PVDF.

Tissue culture media filtration, sensitive biological samples.

Glass FiberLarger porosity; able to remove large

particulates without clogging.

Primarily used as a pre-filter in conjunction with another membrane. Can

be paired with most membranes - but typically with RC, CA, Nylon and PVDF.



102

Cat no. Pore Diameter Pack Type (pcs/pk)

Price/Pack(CAD)

CS-GLN1322 0.22 μm 13 mm 100 $90.00

CS-GLN1345 0.45 μm 13 mm 100 $95.00

CS-GLN2522 0.22 μm 25 mm 100 $102.00

CS-GLN2545 0.45 μm 25 mm 100 $106.00

CS-GLN3022 0.22 μm 30 mm 100 $155.00

CS-GLN3045 0.45 μm 30 mm 100 $160.00


Price/Pack(CAD)

CS-GLPT1322 0.22 μm 13 mm 100 $97.00

CS-GLPT1345 0.45 μm 13 mm 100 $98.00

CS-GLPT2522 0.22 μm 25 mm 100 $104.00

CS-GLPT2545 0.45 μm 25 mm 100 $110.00

CS-GLPT3022 0.22 μm 30 mm 100 $160.00

CS-GLPT3045 0.45 μm 30 mm 100 $168.00

199.Syringe Filter, Polyamide(PA), Nylon66(Hydrophilic) It has broad compatibility with aqueous and organic naturally hydrophilic membrane; extremely low in extractables; excellent flow rate with most sample matrices; not compatible with strong acids or bases. Nylon membranes are particularly suitable for general laboratory filtration. This includes filtration for most HPLC samples. It is also used for the clarification and sterilization of alkaline solutions. This membrane has high mechanical stability. NOTE: Nylon binds protein, do not use when high protein recovery is desired.

200.Syringe Filter, Polytetrafluorethylene, PTFE (Hyrdrophobic) The Hydrophobic PTFE membrane is resistant to nearly all solvents, acids and bases, membrane is mechanically strong and will withstand exposure to high temperature liquids. Low in extractables, PTFE blocks water vapor, and can be used to filter aqueous solutions after pre-wetting with an alcohol. Polytetrafluorethylene membranes are used for the filtration of aggressive organic, highly basic, or hot solutions. Since it has a low resistance to gases, the membrane is also used for air and gas filtration (aeration and ventilation tasks).



103


Price/Pack(CAD)

CS-GLPV1322 0.22 μm 13 mm 100 $97.00

CS-GLPV1345 0.45 μm 13 mm 100 $98.00

CS-GLPV2522 0.22 μm 25 mm 100 $120.00

CS-GLPV2545 0.45 μm 25 mm 100 $125.00

CS-GLPV3022 0.22 μm 30 mm 100 $160.00

CS-GLPV3045 0.45 μm 30 mm 100 $168.00

201.Syringe Filter, Polyvinylidenefluoride ,PVDF (Hydrophilic) It is Hydrophilic membrane with good solvent resistance. Low UV absorbing extractables and low non-specific binding. Polyvinylidenefluoride membranes are used for general biological filtration and in cases where high protein recovery is desired. It has slight hydrophilic properties and can be used for clear filtration and sterilization of aqueous solutions.


202.Syringe Filter, Mixed Cellulose Ester, MCE (Hydrophilic) Naturally hydrophilic membrane with high flow rates, superior strength and exceptional sensitivityIdeal for use in general filtration, medical assays or diagnostic kit manufacturing applications.The mixed cellulose ester membrane is hydrophilic. It is a mixed ester of the CA and CN membrane material. MCE membranes contain a high proportion of cellulose nitrate and can therefore be used for similar tasks.


Price/Pack(CAD)

CS-GLMC1322 0.22 μm 13 mm 100 $90.00

CS-GLMC1345 0.45 μm 13 mm 100 $93.00

CS-GLMC2522 0.22 μm 25 mm 100 $110.00

CS-GLMC2545 0.45 μm 25 mm 100 $120.00


104

203.Syringe Filter, Polyethersulfone, PES (Hydrophilic) It supports High flow rates with good throughput volume. Low protein binding. Compatible with high temperature liquids. Mechanically strong membrane low in extractable ions. PES is certified for ion chromatography, tissue culture filtration, filtration of proteins and nucleic acids. Polyethersulfone membranes are hydrophilic and have low protein adorption. They are primarily used for aqueous or partially organic media (pH 2-12) in pharmaceutical and biological sample preparation.


Price/Pack(CAD)

CS-GLPES1322 0.22 μm 13 mm 100 $97.00

CS-GLPES1345 0.45 μm 13 mm 100 $98.00

CS-GLPES2522 0.22 μm 25 mm 100 $110.00

CS-GLPES2545 0.45 μm 25 mm 100 $115.00

CS-GLPES3022 0.22 μm 30 mm 100 $160.00

CS-GLPES3045 0.45 μm 30 mm 100 $168.00


204.Syringe Filter, Polypropylene, PP (Hydrophobic) This Hydrophobic membrane has wide chemical compatibility with organic solvents. Low non-specific protein binding. Used for Filtration of biological samples, filtration of aggressive organic solutions. Polypropylene membranes are slightly hydrophobic and versatile in use. They are attacked by few substances and are relatively inert (except for strong oxidizing agents). They are highly stable and can be used for both aqueous and organic media.


Price/Pack(CAD)

CS-GLPP1322 0.22 μm 13 mm 100 $97.00

CS-GLPP1345 0.45 μm 13 mm 100 $98.00

CS-GLPP2522 0.22 μm 25 mm 100 $120.00

CS-GLPP2545 0.45 μm 25 mm 100 $125.00

CS-GLPP3022 0.22 μm 30 mm 100 $160.00

CS-GLPP3045 0.45 μm 30 mm 100 $168.00

FILTER PRODUCTS MEMBRANE FILTERS


205.Nylon 66 Membrane Filter Nylon membrane filter is a supported, naturally hydrophilic membrane .Nylon membrane filters are flexible, durable and tear resistant, and can be autoclaved at 121°C. It has High strength and heat resistance. It is used for HPLC sample preparation,to sterilize biological solutions or buffers,or for vacuum degassing and Compatible with many aqueous, alcohols solvents, bases, most HPLC solvents, aromatic hydrocarbons and THF.

206.PTFE (Hydrophobic) Membrane FilterPolytetrafluoroethylene (PTFE) membrane discs are used for a variety of filtration applications, including biochemistry, microelectronic, lab material and etc. It can effectively filtrate microorganism and other particulates .PTFE also has high temperature resistance and wide chemical compatibility. Its Highly porous membrance filter and its used to sterilize gasses,vent gas from aqueous solutions,or sterilize or clarify aggressive chemicals. Insert to mostaggressive solvents, strong acids, alcohols, bases, aromatics.


Price/Pack(CAD)

CS-GLMN1322 0.22 μm 13 mm 100 $136.51

CS-GLMN2522 0.22 μm 25 mm 100 $167.29

CS-GLMN4722 0.22 μm 47 mm 100 $226.89

CS-GLMN1345 0.45 μm 13 mm 100 $136.51

CS-GLMN2545 0.45 μm 25 mm 100 $167.29

CS-GLMN4745 0.45 μm 47 mm 100 $226.89


Price/Pack(CAD)

CS-GLMPT1322 0.22 μm 13 mm 100 $150.00

CS-GLMPT2522 0.22 μm 25 mm 100 $170.00

CS-GLMPT4722 0.22 μm 47 mm 100 $235.00

CS-GLMPT1345 0.45 μm 13 mm 100 $150.00

CS-GLMPT2545 0.45 μm 25 mm 100 $107.00

CS-GLMPT4745 0.45 μm 47 mm 100 $235.00

FILTER PRODUCTSMEMBRANE FILTERS


207.PVDF (Hydrophilic) Membrane FilterIt is Hydrophilic membrane with good solvent resistance. Low UV absorbing extractables and low non-specific binding. Polyvinylidenefluoride membranes are used for general biological filtration and in cases where high protein recovery is desired. It has slight hydrophilic properties and can be used for clear filtration and sterilization of aqueous solutions.


Price/Pack(CAD)

CS-GLMPV1322 0.22 μm 13 mm 100 $123.60

CS-GLMPV2522 0.22 μm 25 mm 100 $148.80

CS-GLMPV4722 0.22 μm 47 mm 100 $196.80

CS-GLMPV1345 0.45 μm 13 mm 100 $123.60

CS-GLMPV2545 0.45 μm 25 mm 100 $148.80

CS-GLMPV4745 0.45 μm 47 mm 100 $196.80

FLASKROUND BOTTOM



208.Flask, Round Bottom, Single NeckHeavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.

Cat no. Capacity (mL) Joint Pack Type Price/Each (CAD)

CS-F0301405 5 14/20 Each $17.92

CS-F0301410 10 14/20 Each $18.49

CS-F0301910 10 19/22 Each $19.17

CS-F0301425 25 14/20 Each $18.49

CS-F0301925 25 19/22 Each $18.72

CS-F0302425 25 24/40 Each $18.60

CS-F0301450 50 14/20 Each $18.49

CS-F0301950 50 19/22 Each $18.60

CS-F0302450 50 24/40 Each $19.17

CS-F0301100 100 14/20 Each $18.49

CS-F0309100 100 19/22 Each $18.60

CS-F0304100 100 24/40 Each $19.17

CS-F0304150 150 24/40 Each $23.10

CS-F0301250 250 14/20 Each $23.39

CS-F0309250 250 19/22 Each $24.88

CS-F0304250 250 24/40 Each $26.25

CS-F0309500 500 19/22 Each $29.10

CS-F0304500 500 24/40 Each $30.36

CS-F0304000 1000 24/40 Each $36.90

CS-F030242L 2000 24/40 Each $91.52

CS-F030243L 3000 24/40 Each $148.26


209.Flask, Round Bottom, Spherical JointHeavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.

Cat no. Capacity (mL) Joints Pack Type Price/Each (CAD)

CS-F0527050 50 35/20 Each $27.65

CS-F0527100 100 35/20 Each $27.65

CS-F0527250 250 35/20 Each $27.65

CS-F0527500 500 35/20 Each $29.22

CS-F0527000 1000 35/20 Each $39.96

CS-F052702L 2000 35/20 Each $99.63

FLASKROUND BOTTOM



211.Flask, Round Bottom, Threaded InletWith a threaded side port for insertion of thermometer or bleed tubes, having an O.D. between 5mm and 7.5mm. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.


CS-F0141425 25 14/20 Each $47.87

CS-F0141450 50 14/20 Each $47.87

CS-F0141950 50 19/22 Each $48.26

CS-F0141100 100 14/20 Each $48.91

CS-F0149100 100 19/22 Each $55.87

CS-F0144100 100 24/40 Each $66.44

CS-F0141250 250 14/20 Each $61.34

CS-F0149250 250 19/22 Each $64.60

CS-F0144250 250 24/40 Each $68.92

CS-F0144500 500 24/40 Each $72.59


210.Flask, Round Bottom with HooksHeavy wall design.


CS-F0331405 5 14/20 Each $25.63

CS-F0331905 5 19/22 Each $25.63

CS-F0331410 10 14/20 Each $25.63

CS-F0331910 10 19/22 Each $25.63

CS-F0331425 25 14/20 Each $25.63

CS-F0331925 25 19/22 Each $25.63

CS-F0331450 50 14/20 Each $25.63

CS-F0331950 50 19/22 Each $25.63

CS-F0331100 100 14/20 Each $25.63

CS-F0339100 100 19/22 Each $25.63

CS-F0334250 250 24/40 Each $33.25

CS-F0334500 500 24/40 Each $37.25

CS-F0334000 1000 24/40 Each $42.09

FLASKROUND BOTTOM



212.Flask, Two Neck, AngledRound bottom with joints. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.

Cat no. Capacity (mL) Center Joints Side Joints Pack Type Price/Each (CAD)

CS-F0411410 10 14/20 10/30 Each $50.12

CS-F0411110 10 14/20 14/20 Each $50.12

CS-F0414910 10 19/22 19/22 Each $50.12

CS-F0411125 25 14/20 14/20 Each $50.13

CS-F0411925 25 19/22 14/20 Each $52.00

CS-F0419925 25 19/22 19/22 Each $52.00

CS-F0411150 50 14/20 14/20 Each $50.13

CS-F0411950 50 19/22 14/20 Each $52.00

CS-F0419950 50 19/22 19/22 Each $52.00

CS-F0414150 50 24/40 14/20 Each $68.53

CS-F0414950 50 24/40 19/22 Each $68.53

CS-F0414450 50 24/40 24/40 Each $68.53

CS-F0411100 100 14/20 14/20 Each $50.53

CS-F0411900 100 19/22 14/20 Each $52.00

CS-F0419900 100 19/22 19/22 Each $52.00

CS-F0414100 100 24/40 14/20 Each $68.53

CS-F0419100 100 24/40 19/22 Each $68.53

CS-F0414400 100 24/40 24/40 Each $70.66

CS-F0411250 250 14/20 14/20 Each $54.53

CS-F0410250 250 19/22 14/20 Each $55.46

CS-F0419250 250 19/22 19/22 Each $57.20

CS-F0414251 250 24/40 14/20 Each $72.26

CS-F0414259 250 24/40 19/22 Each $72.26

CS-F0414250 250 24/40 24/40 Each $72.26

CS-F0411501 500 14/20 14/20 Each $57.33

CS-F0419501 500 19/22 14/20 Each $60.53

CS-F0419509 500 19/22 19/22 Each $60.53

CS-F0414501 500 24/40 14/20 Each $62.80

CS-F0414509 500 24/40 19/22 Each $62.80

CS-F0414504 500 24/40 24/40 Each $76.26

CS-F041611L 1000 24/40 14/20 Each $93.46

CS-F041621L 1000 24/40 19/22 Each $93.46

CS-F041241L 1000 24/40 24/40 Each $93.46

CS-F041242L 2000 24/40 24/40 Each $150.52

FLASKROUND BOTTOM



213.Flask, Three Neck, AngledRound bottom with joints. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.


CS-F0431110 10 14/20 14/20 Each $58.93

CS-F0431125 25 14/20 14/20 Each $58.93

CS-F0439125 25 19/22 14/20 Each $60.13

CS-F0439925 25 19/22 19/22 Each $62.26

CS-F0431150 50 14/20 14/20 Each $62.26

CS-F0439150 50 19/22 14/20 Each $64.00

CS-F0439950 50 19/22 19/22 Each $65.73

CS-F0434150 50 24/40 14/20 Each $81.33

CS-F0434950 50 24/40 19/22 Each $81.33

CS-F0434450 50 24/40 24/40 Each $81.33

CS-F0431100 100 14/20 14/20 Each $62.53

CS-F0439100 100 19/22 14/20 Each $64.13

CS-F0439900 100 19/22 19/22 Each $65.73

CS-F0434100 100 24/40 14/20 Each $99.99

CS-F0434900 100 24/40 19/22 Each $99.99

CS-F0434400 100 24/40 24/40 Each $99.99

CS-F0431250 250 14/20 14/20 Each $70.40

CS-F0430250 250 19/22 14/20 Each $72.13

CS-F0439250 250 19/22 19/22 Each $73.86

CS-F0430050 250 24/40 14/20 Each $94.66

CS-F0432250 250 24/40 19/22 Each $94.66

CS-F0434250 250 24/40 24/40 Each $94.66

CS-F0431500 500 14/20 14/20 Each $77.33

CS-F0432500 500 19/22 14/20 Each $80.79

CS-F0439500 500 19/22 19/22 Each $80.80

CS-F0430500 500 24/40 19/22 Each $105.59

CS-F0434500 500 24/40 24/40 Each $105.59

CS-F043411L 1000 24/40 14/20 Each $116.37

CS-F043491L 1000 24/40 19/22 Each $116.37

CS-F043401L 1000 24/40 24/40 Each $118.93

CS-F043242L 2000 24/40 24/40 Each $185.32

FLASKROUND BOTTOM



214.Flask, Three Neck, VerticalRound bottom with joints. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.


CS-F0441150 50 14/20 14/20 Each $58.66

CS-F0449150 50 19/22 14/20 Each $61.32

CS-F0449950 50 19/22 19/22 Each $58.66

CS-F0441100 100 14/20 14/20 Each $61.32

CS-F0449100 100 19/22 14/20 Each $63.99

CS-F0449900 100 19/22 19/22 Each $63.99

CS-F0444100 100 24/40 14/20 Each $99.99

CS-F0444900 100 24/40 19/22 Each $99.99

CS-F0444400 100 24/40 24/40 Each $99.99

CS-F0441250 250 14/20 14/20 Each $69.33

CS-F0440250 250 19/22 14/20 Each $69.33

CS-F0449250 250 19/22 19/22 Each $69.33

CS-F0442250 250 24/40 19/22 Each $99.99

CS-F0444250 250 24/40 24/40 Each $99.99

CS-F0441500 500 14/20 14/20 Each $77.33

CS-F0442500 500 19/22 14/20 Each $105.59

CS-F0449500 500 19/22 19/22 Each $105.59

CS-F0440500 500 24/40 19/22 Each $105.59

CS-F0444500 500 24/40 24/40 Each $105.59

CS-F044411L 1000 24/40 14/20 Each $118.93

CS-F044491L 1000 24/40 19/22 Each $118.93

CS-F0444000 1000 24/40 24/40 Each $118.93

CS-F044242L 2000 24/40 24/40 Each $185.32

FLASKROUND BOTTOM



215.Flask, Round Bottom, 3-Neck Bottom OutletLower outlet is a 4mm straight bore Teflon® stopcock.


CS-F0424450 500 24/40 24/40 Each $190.14

CS-F042441L 1000 24/40 24/40 Each $211.20

CS-F042442L 2000 24/40 24/40 Each $238.92

CS-F042252L 2000 45/50 24/40 Each $253.61


216.Flask, Round Bottom, 4-Neck, AngledHeavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.


CS-F0221125 25 14/20 14/20 Each $85.53

CS-F0221925 25 19/22 14/20 Each $91.41

CS-F0221150 50 14/20 14/20 Each $86.06

CS-F0221950 50 19/22 14/20 Each $91.41

CS-F0221100 100 14/20 14/20 Each $86.06

CS-F0229100 100 19/22 14/20 Each $91.41

CS-F0221250 250 14/20 14/20 Each $91.29

CS-F0229250 250 19/22 14/20 Each $130.79

CS-F0224250 250 24/40 24/40 Each $130.79

CS-F0221500 500 14/20 14/20 Each $138.63

CS-F0229500 500 19/22 14/20 Each $138.63

CS-F0224500 500 24/40 24/40 Each $138.63

CS-F0224000 1000 24/40 24/40 Each $159.56

CS-F022242L 2000 24/40 24/40 Each $190.95

FLASK ROUND BOTTOM



217.Flask, Round Bottom 4-Neck,VerticalWith identical vertical side joints.

218.Flask, Round Bottom, Boiling, Long NeckNarrow neck with beaded rim.

Cat no. Capacity (mL) Center Joint Side Joint Pack Type Price/Each (CAD)

CS-F0219140 100 19/22 14/20 Each $117.88

CS-F0214190 100 24/40 19/22 Each $117.88

CS-F0211250 250 14/20 14/20 Each $123.90

CS-F0219250 250 19/22 14/20 Each $126.26

CS-F0214259 250 24/40 19/22 Each $129.80

CS-F0214250 250 24/40 24/40 Each $141.25

CS-F0211500 500 14/20 14/20 Each $135.58

CS-F0219500 500 19/22 14/20 Each $138.18

CS-F0214591 500 24/40 19/22 Each $140.66

CS-F0214500 500 24/40 24/40 Each $146.08

CS-F0212500 500 29/42 24/40 Each $160.36

CS-F0218500 500 29/42 29/42 Each $164.96

CS-F0214091 1000 24/40 19/22 Each $177.09

CS-F0214000 1000 24/40 24/40 Each $182.37

CS-F021841L 1000 29/42 24/40 Each $188.68

CS-F021242L 2000 24/40 24/40 Each $245.44

CS-F021842L 2000 29/42 24/40 Each $246.92

CS-F021342L 2000 34/45 24/40 Each $254.70

Cat no. Capacity (mL) Approx O.D. x Height (mm) Pack Type

Price/Each (CAD)

233.202.03 250 83x149 10 $11.42

233.202.04 500 102x203 10 $15.61

233.202.05 1000 130x241 10 $19.68

233.202.06 2000 161x308 6 $52.86

233.202.08 5000 221x380 1 $115.71

FLASK FLAT BOTTOM



220.Flask, Flat Bottom, AmberHeavy wall single neck, flat bottom flask with an outer joint.


CS-F0124250A 250 24/40 Each $68.00

CS-F0124500A 500 24/40 Each $89.00

CS-F0124000A 1000 24/40 Each $109.00


219.Flask, Flat BottomHeavy wall single neck, flat bottom flask with an outer joint.


CS-F0121450 50 14/22 Each $23.49

CS-F0121950 50 19/22 Each $24.53

CS-F0122450 50 24/40 Each $25.41

CS-F0129100 100 19/22 Each $26.36

CS-F0124100 100 24/40 Each $26.87

CS-F0124125 125 24/40 Each $26.87

CS-F0124250 250 24/40 Each $26.87

CS-F0124500 500 24/40 Each $30.78

CS-F0124000 1000 24/40 Each $49.20

221.Flask, Flat Bottom, Boiling, Long Neck

Cat no. Capacity (mL) Approx O.D. x Height (mm) Pack Type Price/Each

(CAD)235.202.03 250 82x134 10 $12.75

235.202.04 500 103x174 10 $17.42

235.202.05 1000 132x213 10 $20.94

235.202.06 2000 168x293 6 $57.04

FLASKERLENMEYER-STOPPER TOP & SCREW TOP


222.Erlenmeyer Flask, Narrow Neck With GraduationThese flasks are the choice for general laboratory usage. Tops are reinforced and tooled with a rounded finish, containing more glass to give them maximum mechanical strength. Body is thick walled with a long tapered outside contour to minimize chipping when struck or rubbed together. All flasks have durable white ceramic enamel scales to indicate approximate volumes at various levels, useful in measuring and mixing solutions where a high degree of accuracy is not necessary.


Grad. Range (mL)

Grad. Interval

(mL)

Rubber Stopper

no.

Approx Width x Height (mm)

Qty/Pk

Qty/Cs

Price/Pack (CAD)

231.202.01A 10 5-10 5 0 31x50 12 12 $98.10

231.202.01 25 10-20 5 0 41x65 12 48 $67.30

231.202.02 50 20 - 50 10 1 51x78 12 48 $67.30

231.202.04 125 50 - 125 25 5 67x114 12 48 $60.43

231.202.05 250 50 - 200 25 6 82x132 12 48 $63.18

231.202.06 500 100 - 500 50 7 101x176 6 36 $39.49

231.202.07 1000 250 - 1000 50 9 129x216 6 24 $64.07

231.202.08 2000 600 - 2000 200 10 160x268 4 8 $99.62

231.202.09 4000 1000 - 4000 500 10 206x360 1 4 $78.95

223.Erlenmeyer Flask, Wide Neck With GraduationA wide mouth flask especially recommended for use as a titration flask.For convenience, these flasks are graduated to show the approximate capacity and have an extra large marking spot.


Grad. Range(mL)

Grad. Interval

(mL)

Rubber Stopper

no.Qty/Pk Qty/Cs Price/Pack

(CAD)

232.202.01 125 50-125 25 6 12 48 $84.04

232.202.02 250 50-200 25 8 12 48 $93.85

232.202.03 500 100-500 50 10 6 36 $56.41

232.202.04 1000 250-1000 50 11 6 24 $94.09

232.202.05 2000 400-1800 100 13 4 8 $117.50

FLASK ERLENMEYER-STOPPER TOP & SCREW TOP



Note:All sizes including 1L flasks are hand-blown from tubing to ensure heavy and uniform wall.

224.Flask, Erlenmeyer, Outer JointWith Joint. Stopper is not supplied.

225.Flask Erlenmeyer, GL ThreadsFlask has a GL screw thread top and is supplied complete with a polypropylene liner less closure and pouring ring.


CS-F0661405 14/20 5 Each $20.04

CS-F0661410 14/20 10 Each $20.05

CS-F0661910 19/22 10 Each $21.50

CS-F0661425 14/20 25 Each $20.05

CS-F0661925 19/22 25 Each $21.50

CS-F0661450 14/20 50 Each $20.05

CS-F0661950 19/22 50 Each $21.50

CS-F0662450 24/40 50 Each $25.72

CS-F0661125 14/20 125 Each $23.61

CS-F0669125 19/22 125 Each $24.80

CS-F0664125 24/40 125 Each $26.12

CS-F0664250 24/40 250 Each $26.77

CS-F0664500 24/40 500 Each $32.31

CS-F0664000 24/40 1000 Each $32.31

Cat no. Capacity (mL) Cap Size Qty/Pack

Qty/Case

Price/Pack (CAD)

075.202.02 125 GL-32 10 24 $317.90

075.202.04 250 GL-45 10 24 $384.45

075.202.05 500 GL-45 6 24 $251.13

075.202.06 1000 GL-45 4 12 $199.10

075.202.07 2000 GL-45 2 8 $146.96

FLASKIODINE



226.Flask, IodineFlask has a funnel top with a standard taper outer grind to accept a 24/40 long neck stopper allowing the handle to extend above the liquid seal. Used in ASTM D29 and ASTM D555.

Cat no. Capacity (mL) Joint size Pack Type Price/Each (CAD)

072.202.01 125 24/40 2 $96.60

072.202.02 250 24/40 2 $109.40

072.202.03 500 24/40 2 $122.40

FLASKPEAR SHAPE




228.Flask, Pear Shape, Threaded InletWith a threaded side port for insertion of thermometers or bleed tubes having an O.D. between 5mm and 7.5mm.

227.Flask, Pear Shape, Single NeckHeavy wall design.

Cat no. Joint Capacity (mL) Pack Type Price/Each (CAD)

CS-F0131010 14/20 10 Each $50.10

CS-F0131415 14/20 15 Each $50.10

CS-F0131025 14/20 25 Each $62.50

CS-F0131214 14/20 200 Each $77.50

CS-F0139200 19/22 200 Each $81.25

Cat no. Joint Capacity (mL) Pack Type Price/Each (CAD)

CS-F0321405 14/20 5 Each $18.83

CS-F0329205 19/22 5 Each $19.29

CS-F0321410 14/20 10 Each $18.83

CS-F0329210 19/22 10 Each $19.29

CS-F0321415 14/20 15 Each $18.83

CS-F0321225 14/20 25 Each $18.83

CS-F0329225 19/22 25 Each $19.29

CS-F0321250 14/20 50 Each $18.83

CS-F0329250 19/22 50 Each $19.29

CS-F0322450 24/40 50 Each $25.90

CS-F0321100 14/20 100 Each $20.08

CS-F0329100 19/22 100 Each $20.77

CS-F0324100 24/40 100 Each $27.39

CS-F0321200 14/20 200 Each $32.56

CS-F0329200 19/22 200 Each $34.26

CS-F0324200 24/40 200 Each $36.31

FLASK PEAR SHAPE



229.Flask, Two Neck, Pear ShapePear shape with joints. Heavy wall design.

Cat no. Center Joints Side Joints Capacity (mL) Pack Type Price/Each (CAD)

CS-F0341105 14/20 14/20 5 Each $37.73

CS-F0341110 14/20 14/20 10 Each $37.73

CS-F0341910 19/22 14/20 10 Each $37.73

CS-F0349910 19/22 19/22 10 Each $37.73

CS-F0341115 14/20 14/20 15 Each $37.73

CS-F0341125 14/20 14/20 25 Each $37.73

CS-F0341925 19/22 14/20 25 Each $37.73

CS-F0349925 19/22 19/22 25 Each $37.73

CS-F0341150 14/20 14/20 50 Each $37.73

CS-F0341950 19/22 14/20 50 Each $37.73

CS-F0349950 19/22 19/22 50 Each $37.73

CS-F0341100 14/20 14/20 100 Each $40.86

CS-F0341900 19/22 14/20 100 Each $40.86

CS-F0349900 19/22 19/22 100 Each $40.86

CS-F0341200 14/20 14/20 200 Each $54.44

CS-F0349200 19/22 14/20 200 Each $55.90

CS-F0349920 19/22 19/22 200 Each $56.10

FLASK KJELDAHL



230.Flask, Kjeldahl, Long Neck With Standard Taper JointKjeldahl shape flask with a standard taper outer joint. Flasks with joint sizes other than those listed are available.


Approx. overall

height (mm)Socket Size Pack Type Price/Each

(CAD)

070.202.03 100 265 24/40 Each $40.70

070.202.04 300 295 24/40 Each $42.52

070.202.05 500 305 24/40 Each $48.29

070.202.06 800 325 24/40 Each $56.21

FLASKRECOVERY



231.Flask, RecoveryHeavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness.


CS-F0311405 5 14/20 Each $19.17

CS-F0311410 10 14/20 Each $19.17

CS-F0311910 10 19/22 Each $19.28

CS-F0311425 25 14/20 Each $19.17

CS-F0311925 25 19/22 Each $19.28

CS-F0312425 25 24/40 Each $24.07

CS-F0311450 50 14/20 Each $19.17

CS-F0311950 50 19/22 Each $19.28

CS-F0312450 50 24/40 Each $24.08

CS-F0311100 100 14/20 Each $19.75

CS-F0319100 100 19/22 Each $19.86

CS-F0314100 100 24/40 Each $24.53

CS-F0311200 200 14/20 Each $26.88

CS-F0319200 200 19/22 Each $29.20

CS-F0314200 200 24/40 Each $31.96

CS-F0311250 250 14/20 Each $35.25

CS-F0319250 250 19/22 Each $24.18

CS-F0314250 250 24/40 Each $34.24

CS-F0314500 500 24/40 Each $49.19

CS-F0314000 1000 24/40 Each $60.48

FLASKFILTERING/VACUUM


232.Flask, Buckner, Filtration Bolt NeckThese flasks, with tabulation, are blown in special molds, in shapes designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent foot for rubber stoppers. Tabulation O.D. on sizes up to 1000mL is 10.0mm. Tabulation O.D. for 2000mL and 4000mL is 12.5 mm.

233.Flask, Filtering Heavy WallHeavy wall Erlenmeyer shaped filtering flask with standard taper outer joint and serrated hose connection for attachment to vacuum source.


Grad. Range (mL)

Grad. Interval

(mL)

Rubber Stopper

no.

Approx O.D. x Height (mm)

Pack Type

Price/Pack (CAD)

CS-F0150025 25 - - 3 40X75 6 $155.06

CS-F0150050 50 - - 4 51X85 6 $155.06

CS-F0150125 125 50-125 - 5 70x110 6 $160.43

CS-F0150250 250 75-250 25 6 84x146 6 $144.53

CS-F0150500 500 150-500 50 7 106x184 6 $206.79

CS-F0151000 1000 300-1000 50 8 137x238 6 $326.35

CS-F0152000 2000 600-2000 200 9 168x292 1 $108.04

CS-F0154000 4000 1500-4000 500 12 198x356 1 $158.69

CS-F0155000 5000 1500-5000 500 12 220x367 1 $200.00

Cat no. Capacity (mL) Joint Pack Type Price/Each (CAD)

CS-F0155251 250 19/22 Each $70.52

CS-F0155252 250 24/40 Each $79.93

CS-F0155500 500 24/40 Each $104.56


FLASKDISTILLATION


234.Flask, Distillation, ASTM E-1405The sidearm of the 125 mL flask is located approximately 137 mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Suitable for micro chemical equipments.

Cat no. Nominal Capacity (mL) Dia. (mm) Height (mm) Side Dia

(mm) Arm Length Pack Type Price/Pack (CAD)

073.205.01 125 69 215 7 7 2 $64.00

FLASKSCHLENK TUBE



235.Tube, Storage, High vacuum ValveSupplied with high vacuum valve with PTFE O-ring at tip and PTFE wiper to protect Viton® O-Ring on shaft.

236.Flask, Reaction Tube, High vacuum ValveSupplied with high vacuum valve with PTFE O-ring at tip and PTFE wiper to protect Viton® O-Ring on shaft.

Cat no. Capacity (mL) Valve Size Tube O.D. x

Length (mm) Pack Type Price/Each (CAD)

CS-F0580025 25 0-4mm 26 × 110 Each $76.34

CS-F0580825 25 0-8mm 26 × 110 Each $87.23

CS-F0580050 50 0-4mm 28 × 120 Each $89.32

CS-F0580850 50 0-8mm 28 × 120 Each $101.37

CS-F0580100 100 0-4mm 40 × 165 Each $94.05

CS-F0588100 100 0-8mm 40 × 165 Each $104.72

CS-F0584250 250 0-4mm 60 × 185 Each $98.17

CS-F0588250 250 0-8mm 60 × 185 Each $109.56

CS-F0584350 350 0-4mm 70 × 200 Each $106.80

CS-F0588350 350 0-8mm 70 × 200 Each $109.90

Cat no. Capacity (mL) Joint Valve Size Pack Type Price/Each (CAD)

CS-F0561025 25 14/20 0-4mm Each $90.29

CS-F0561050 50 14/20 0-4mm Each $90.42

CS-F0561100 100 14/20 0-4mm Each $91.28

CS-F0564100 100 24/40 0-4mm Each $96.76

CS-F0564250 250 24/40 0-4mm Each $96.76

CS-F0564350 350 24/40 0-4mm Each $106.91

FLASK SCHLENK TUBE




237.Flask, Reaction Tube, Male JointSupplied with high vacuum valve with PTFE O-ring at tip and PTFE wiper to protect Viton® O-Ring on shaft.

238.Flask, Reaction Tube, With Glass StopcockWith 2mm glass stopcock. With spring retention device for smooth turning purpose.

Cat no. Capacity (mL) Joints Valve Size Pack Type Price/Each (CAD)

CS-F0571025 25 14/20 0-4mm Each $87.38

CS-F0571050 50 14/20 0-4mm Each $88.17

CS-F0571100 100 14/20 0-4mm Each $96.16

CS-F0574100 100 24/40 0-4mm Each $95.57

CS-F0574250 250 24/40 0-4mm Each $111.97

CS-F0574350 350 24/40 0-4mm Each $125.50


CS-F0531050 50 14/20 Each $106.58

CS-F0531950 50 19/22 Each $107.09

CS-F0531100 100 14/20 Each $107.01

CS-F0539100 100 19/22 Each $108.02

CS-F0534100 100 24/40 Each $107.68

CS-F0531250 250 14/20 Each $108.29

CS-F0539250 250 19/22 Each $113.47

CS-F0534250 250 24/40 Each $117.69

CS-F0534500 500 24/40 Each $120.98

FLASKSCHLENK TUBE




239.Flask, Reaction Tube, With Inner (Male) JointWith an inner joint and 2mm glass stopcock having a constant pressure retention device.

240.Flask, Reaction Tube, With Outer JointWith an outer joint and 2mm glass stopcock having a constant pressure retention device.

Cat no. Capacity Joints Pack Type Price/Each (CAD)

CS-F0691025 25 14/20 Each $78.58

CS-F0691050 50 14/20 Each $78.58

CS-F0691100 100 14/20 Each $79.98

CS-F0694100 100 24/40 Each $84.31

CS-F0694250 250 24/40 Each $85.72

CS-F0694350 350 24/40 Each $87.31

Cat no. Capacity Joints Pack Type Price/Each (CAD)

CS-F0891410 10 14/20 Each $79.43

CS-F0891425 25 14/20 Each $80.84

CS-F0891450 50 14/20 Each $81.14

CS-F0891950 50 19/22 Each $82.30

CS-F0892450 50 24/40 Each $82.97

CS-F0891100 100 14/20 Each $81.87

CS-F0899100 100 19/22 Each $82.95

CS-F0894100 100 24/40 Each $83.40

CS-F0899200 200 19/22 Each $84.20

CS-F0894200 200 24/40 Each $85.41

CS-F0894250 250 24/40 Each $86.88

FLASK SCHLENK TUBE



241.Flask, High vacuum ValveSupplied with high vacuum valve with PTFE O-ring at tip and PTFE wiper to protect Viton® O-Ring on shaft.

242.Flask, Reaction, High vacuum ValveSupplied with high vacuum valve with PTFE O-ring at tip and PTFE wiper to protect Viton® O-Ring on shaft.

Cat no. Capacity (mL) Valve Size Pack Type Price/Each (CAD)

CS-F0490010 10 0-4mm Each $100.66

CS-F0490025 25 0-4mm Each $100.66

CS-F0490050 50 0-4mm Each $100.66

CS-F0490100 100 0-4mm Each $104.68

CS-F0490250 250 0-4mm Each $108.25

CS-F0490258 250 0-8mm Each $132.30

CS-F0490500 500 0-4mm Each $113.60

CS-F0490508 500 0-8mm Each $126.75

CS-F049041L 1000 0-4mm Each $135.82

CS-F049081L 1000 0-8mm Each $148.16


CS-F0541050 50 14/20 0-4mm Each $103.52

CS-F0541950 50 19/22 0-4mm Each $105.20

CS-F0541100 100 14/20 0-4mm Each $103.52

CS-F0549100 100 19/22 0-4mm Each $105.59

CS-F0544100 100 24/40 0-4mm Each $105.40

CS-F0541250 250 14/20 0-4mm Each $105.66

CS-F0549250 250 19/22 0-4mm Each $108.97

CS-F0544250 250 24/40 0-4mm Each $113.25

CS-F0544500 500 24/40 0-4mm Each $115.78

CS-F054241L 1000 24/40 0-4mm Each $120.39

FLASKSCHLENK TUBE



243.Flask, Modified Schlenk TubeChoice of either 2mm glass stopcock, 2mm Teflon® stopcock or 0-4mm high vacuum valve.

Cat no. Capacity (mL) Joint Stopcock Type Pack Type Price/Each (CAD)

CS-F0901410 10 14/20 Teflon® Each $59.90

CS-F0901425 25 14/20 Teflon® Each $67.17

CS-F0901450 50 14/20 Teflon® Each $70.55

CS-F0901950 50 19/22 Teflon® Each $75.10

CS-F0902450 50 24/40 Teflon® Each $76.48

CS-F0901100 100 14/20 Teflon® Each $72.32

CS-F0909100 100 19/22 Teflon® Each $75.90

CS-F0904100 100 24/40 Teflon® Each $79.08

CS-F0901200 200 14/20 Teflon® Each $78.32

CS-F0909200 200 19/22 Teflon® Each $81.35

CS-F0904200 200 24/40 Teflon® Each $83.27

CS-F0904500 500 24/40 Teflon® Each $89.25

CS-F0904000 1000 24/40 Teflon® Each $110.89

CS-F0901410G 10 14/20 Glass Each $57.08

CS-F0901425G 25 14/20 Glass Each $63.84

CS-F0901450G 50 14/20 Glass Each $67.22

CS-F0901950G 50 19/22 Glass Each $70.90

CS-F0902450G 50 24/40 Glass Each $73.15

CS-F0901100G 100 14/20 Glass Each $68.99

CS-F0909100G 100 19/22 Glass Each $73.90

CS-F0904100G 100 24/40 Glass Each $75.76

CS-F0901200G 200 14/20 Glass Each $74.26

CS-F0909200G 200 19/22 Glass Each $77.92

CS-F0904200G 200 24/40 Glass Each $79.25

CS-F0904500G 500 24/40 Glass Each $85.34

CS-F0904000G 1000 24/40 Glass Each $103.57

CS-F0901425H 25 14/20 HV VALVE Each $66.67












FLASK SCHLENK TUBE



244.Tube, Storage With Outer JointSupplied with high vacuum valve with PTFE O-ring at tip.

Cat no. Capacity (mL) Joints Valve Size Tube O.D. x

Length (mm)Pack Type

Price/Each (CAD)

CS-F0761425 25 14/20 0-4mm 26 × 110 Each $87.56

CS-F0761450 50 14/20 0-4mm 28 × 120 Each $99.35

CS-F0761950 50 19/22 0-4mm 28 × 120 Each $104.30

CS-F0762450 50 24/40 0-4mm 28 × 120 Each $105.35

CS-F0761100 100 14/20 0-4mm 40 × 165 Each $114.44

CS-F0769100 100 19/22 0-4mm 40 × 165 Each $115.10

CS-F0764100 100 24/40 0-4mm 40 × 165 Each $117.93

CS-F0761108 100 14/20 0-8mm 40 × 165 Each $116.16

CS-F0769108 100 19/22 0-8mm 40 × 165 Each $117.16

CS-F0764108 100 24/40 0-8mm 40 × 165 Each $119.70

CS-F0761250 250 14/20 0-4mm 60 × 185 Each $125.90

CS-F0769250 250 19/22 0-4mm 60 × 185 Each $125.90

CS-F0764250 250 24/40 0-4mm 60 × 185 Each $125.90

CS-F0761258 250 14/20 0-8mm 60 × 185 Each $128.59

CS-F0769258 250 19/22 0-8mm 60 × 185 Each $131.59

CS-F0764258 250 24/40 0-8mm 60 × 185 Each $133.26

CS-F0761350 350 14/20 0-4mm 70 × 200 Each $141.90

CS-F0769350 350 19/22 0-4mm 70 × 200 Each $145.10

CS-F0764350 350 24/40 0-4mm 70 × 200 Each $147.90

CS-F0761358 350 14/20 0-8mm 70 × 200 Each $154.66

CS-F0769358 350 19/22 0-8mm 70 × 200 Each $158.10

CS-F0764358 350 24/40 0-8mm 70 × 200 Each $160.16

FLASKSCHLENK TUBE




245.Flask, Storage With Outer JointSupplied with high vacuum valve with PTFE O-ring at tip.

246.Flask, Solvent Transfer/Storage, Straus, Airfree Schlenk


CS-F0461010 10 14/20 0-4mm Each $91.63

CS-F0461025 25 14/20 0-4mm Each $91.63

CS-F0461050 50 14/20 0-4mm Each $91.63

CS-F0461100 100 14/20 0-4mm Each $91.63

CS-F0464100 100 24/40 0-4mm Each $93.70

CS-F0461250 250 14/20 0-4mm Each $101.70

CS-F0464250 250 24/40 0-4mm Each $103.77

CS-F0461500 500 14/20 0-4mm Each $112.06

CS-F0461508 500 14/20 0-8mm Each $120.62

CS-F0464500 500 24/40 0-4mm Each $113.73

CS-F0464508 500 24/40 0-8mm Each $126.90

CS-F0464000 1000 24/40 0-4mm Each $130.90

CS-F0464008 1000 24/40 0-8mm Each $135.30


CS-F0484250 250 24/40 0-4mm Each $124.89

CS-F0484258 250 24/40 0-8mm Each $133.74

CS-F0481500 500 14/20 0-4mm Each $124.89

CS-F0484500 500 24/40 0-4mm Each $144.45

CS-F0481508 500 14/20 0-8mm Each $124.89

CS-F0484508 500 24/40 0-8mm Each $153.87

CS-F0484000 1000 24/40 0-4mm Each $129.88

CS-F0484008 1000 24/40 0-8mm Each $166.34

FLASKVOLUMETRIC


Stoppers (Glass, Teflon) are sold separately. Refer Cat no. CS-S028 and CS-S012.

* All these products are non ASTM E 288 Standards.


Tolerance (±mL)

Stopper #

Colour Printing

Qty/Pk

Qty/Cs.

Price/Pack (CAD)

129.202.01 5 ±0.02 9 White 2 72 $53.80

129.202.02 10 ±0.02 9 White 2 72 $55.04

129.202.02A* 20 ±0.04 9 White 2 72 $72.60

129.202.03 25 ±0.03 9 White 2 72 $54.20

129.202.04 50 ±0.05 9 White 2 48 $58.32

129.202.05 100 ±0.08 13 White 2 48 $60.54

129.202.06 200 ±0.10 16 White 2 24 $70.68

129.202.07 250 ±0.12 16 White 2 24 $75.06

129.202.08 500 ±0.20 19 White 2 12 $96.46

129.202.09 1000 ±0.30 22 White 1 8 $58.95

247.Volumetric Flask With One Graduation Mark Class A, Narrow MouthCalibrated to Class A tolerance in accordance with ASTM E 288 standard. The graduation line on the neck is sharp with permanent large colored encryption for easy to read. Supplied with closed bottom polyethylene stopper to fit in the ground neck. Calibrated To Contain(TC).

248.Flask, Micro Volumetric, Class AClass A micro volumetric flask calibrated to contain. Flasks have hexagonal foot base for stability.


Tolerance (±mL) Stopper # Colour

PrintingQty/Pk.

Qty/Cs.

Price/Each (CAD)

129.202.01A 1 ±0.01 9 White Each 24 $48.28

129.202.03A 2 ±0.15 9 White Each 24 $52.45

FLASKVOLUMETRIC


Stoppers (Glass, Teflon) are sold separately. Refer Cat no. CS-S028 and CS-S012

249.Volumetric Flask With One Graduation Mark Class A, Wide Mouth, Heavy DutyWide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. The graduation line on the neck is sharp with permanent large colored encryption for easy to read. Flasks are calibrated “To Contain” at Class A tolerances, per ASTM E288 specifications. Supplied with closed bottom polyethylene stopper to fit in the ground neck.


Tolerance (±mL) Stopper # Colour

PrintingQty/

PkQty/Cs.

Price/Pack (CAD)

129.203.01 5 ±0.02 13 White 2 72 $65.10

129.203.02 10 ±0.02 13 White 2 72 $70.30

129.203.02N* 15 ±0.02 13 Black 2 72 $121.80

129.203.02A* 20 ±0.04 13 Blue 2 72 $77.78

129.203.03 25 ±0.03 13 Amber 2 72 $76.48

129.203.03A 30 ±0.03 13 White 2 72 $77.34

129.203.04 50 ±0.05 13 White 2 48 $78.54

129.203.05 100 ±0.08 16 White 2 48 $88.62

129.203.06 200 ±0.10 19 White 2 24 $115.68

129.203.07 250 ±0.12 19 Amber 2 24 $125.32

129.203.07A* 400 ±0.20 19 White 2 12 $176.00

129.203.08 500 ±0.20 19 Amber 2 12 $139.12

129.203.08A* 700 ±0.20 22 White 2 12 $200.00

129.203.09A* 900 ±0.30 22 Amber 2 8 $220.00

129.203.09 1000 ±0.30 22 White 1 8 $88.00

129.203.10A* 1500 ±0.30 27 Amber 1 8 $130.00

129.203.10 2000 ±0.50 27 White 1 8 $111.00

129.203.12* 4000 ±1.0 38 White 1 2 $405.70

* All these products are non ASTM E 288 Standards.

FLASKVOLUMETRIC


251.Volumetric Flask, PolypropyleneMaterial: Polypropylene

Cat no. Capacity (mL) Qty/Pk. Price/Each (CAD)

VF-PP-25 25 Each $43.90

VF-PP-50 50 Each $55.59

VF-PP-100 100 Each $59.60

VF-PP-250 250 Each $73.63

VF-PP-500 500 Each $66.90

VF-PP-1000 1000 Each $113.39

250.Volumetric Flask With One Graduation Mark Class A, Wide Mouth, AmberSupplied with closed bottom polyethylene stopper to fit in the ground neck.


Tolerance (±mL)

Stopper #

Colour Printing

Qty/Pk.

Qty/Cs.

Price/Pack (CAD)

130.202.01 5 ±0.02 13 White 2 72 $69.42

130.202.02 10 ±0.02 13 White 2 72 $78.02

130.202.02A* 20 ±0.04 13 White 2 72 $83.82

130.202.03 25 ±0.03 13 White 2 72 $83.82

130.202.04 50 ±0.05 13 White 2 48 $90.74

130.202.05 100 ±0.08 16 White 2 48 $113.64

130.202.06 200 ±0.10 19 White 2 24 $125.42

130.202.07 250 ±0.12 19 White 2 24 $136.74

130.202.07A* 400 ±0.20 19 White 2 12 $161.24

130.202.08 500 ±0.15 19 White 2 12 $161.24

130.202.08A* 700 ±0.20 22 White 2 12 $280.00

130.202.09A* 900 ±0.30 22 White 2 8 $290.00

130.202.09 1000 ±0.30 22 White 1 8 $153.55

130.202.10 2000 0.50 27 White 1 8 $222.81

Stoppers (Glass, Teflon) are sold separately. Refer Cat no. CS-S028 and CS-S012* All these products are non ASTM E 288 standards

FUNNELFILTER/FILTRATION TUBE




252.Funnel, Filter, Fritted DiscWith two 2mm glass stopcocks.

253.Funnel, Filter, Fritted Disc, High VacuumWith a 0-4mm high vacuum valve and a 2mm glass stopcock having constant pressure retention device. Socket Joint on top.

Cat no. Joints Frit O.D. (mm) Porosity Capacity

(mL)Pack Type

Price/Each (CAD)

CS-F0973014C 14/20 30 Coarse 60 Each $162.09

CS-F0973014M 14/20 30 Medium 60 Each $162.09

CS-F0973024C 24/40 30 Coarse 60 Each $169.02

CS-F0973024M 24/40 30 Medium 60 Each $169.02

CS-F0974024C 24/40 40 Coarse 200 Each $209.99

CS-F0974024M 24/40 40 Medium 200 Each $209.99


(mL)Pack Type

Price/Each (CAD)

CS-F0371460C 14/20 30 Coarse 60 Each $187.77

CS-F0371460M 14/20 30 Medium 60 Each $187.77

CS-F0374200C 24/40 40 Coarse 200 Each $192.67

CS-F0374200M 24/40 40 Medium 200 Each $192.67


254.Funnel, Filter, Fritted Disc, High Vacuum, Cone JointWith a 0-4mm high vacuum valve and a 2mm glass stopcock having constant pressure retention device. Cone joint on top.


(mL)Pack Type

Price/Each (CAD)

CS-F0401460C 14/20 30 Coarse 60 Each $192.17

CS-F0401460M 14/20 30 Medium 60 Each $192.17

CS-F0404200C 24/40 40 Coarse 200 Each $192.67

CS-F0404200M 24/40 40 Medium 200 Each $192.67

FUNNEL FILTER/FILTERATION TUBE





255.Filter Tube, Fritted DiscAvailable with a choice of coarse or medium porosity fritted discs.

256.Filter Tube, Fritted Disc, With 2mm Glass StopcockWith two 2mm glass stopcocks having constant pressure retention devices.

257.Funnel, Addition, High vacuum ValveSupplied with high vacuum valve with PTFE O-ring at tip and PTFE wiper to protect Viton® O-ring on shaft.

Cat no. Joints Approx. Frit. O.D. Porosity Pack Type Price/Each (CAD)

CS-F0701420C 14/20 20 C Each $100.71

CS-F0701420M 14/20 20 M Each $100.71

CS-F0701430C 14/20 30 C Each $107.38

CS-F0701430M 14/20 30 M Each $107.38

CS-F0702440C 24/40 36 C Each $110.86

CS-F0702440M 24/40 36 M Each $110.86

Cat no. Joints Approx. Frit. O.D. Porosity Pack Type Price/Each (CAD)

CS-F0351420C 14/20 20 C Each $177.62

CS-F0351420M 14/20 20 M Each $177.62

CS-F0351430C 14/20 30 C Each $177.62

CS-F0351430M 14/20 30 M Each $177.62

CS-F0352440C 24/40 36 C Each $213.74

CS-F0352440M 24/40 36 M Each $213.74


CS-F0551060 14/20 100 Each $224.80

CS-F0554200 24/40 250 Each $247.90

FUNNEL POWDER




258.Funnel, PowderFunnels have a 60° side angle and a standard taper inner joint.

259.Funnel, Powder, Flattened SideFunnels have a 60° side angle and a standard taper inner joint.

260.Funnel, Powder 60° OffsetFor use with Multi-neck flasks.

Cat no. Top Dia. (mm) Joints Pack Type Price/Each (CAD)

CS-F0181950 50 19/22 Each $26.53

CS-F0182450 50 24/40 Each $29.59

CS-F0181975 75 19/22 Each $31.51

CS-F0182475 75 24/40 Each $33.69

CS-F0189100 100 19/22 Each $38.58

CS-F0184100 100 24/40 Each $40.20

Cat no. Top Dia. (mm) Joints Pack Type Price/Each (CAD)

CS-F0191450 50 14/20 Each $31.68

CS-F0191950 50 19/22 Each $33.00

CS-F0192475 75 24/40 Each $41.58

CS-F0194100 100 24/40 Each $48.40

Cat no. Joints Approx. Diameter at Top (mm) Pack Type Price/Each (CAD)

CS-F0392475 24/40 75 Each $42.02

CS-F0394100 24/40 100 Each $50.77

261.Funnel, Plain, Filling, PowderWith a short stem. For use in transferring powder or filling bottles.

Cat no.Approx. I.D.

At Funnel top (mm)

Approx. Stem Length

(mm)

Approx. O.D. of

Stem (mm)

Qty/Pack

Qty/Case

Price/Pack(CAD)

238.203.01 60 35 13 6 24 $75.96

238.203.02 80 35 15 6 24 $84.69

238.203.03 100 35 18 6 24 $124.02

238.203.04 125 35 19 2 12 $65.30

238.203.05 150 35 19 2 12 $136.23

FUNNELFILTER


263.Funnel, Micro


CS-F0740027 27mm O.D. Micro filter funnel Each $19.00

262.Funnel Filtering, 60° angle with stemStems are approximately 10 - 15mm O.D. by approx. 100mm (2” - 4”) long.

Cat no. Diameter (mm) Qty/Pack

Qty/Case

Price/Pack(CAD)

238.202.05 50 12 48 $129.24

238.202.07 65 12 48 $144.12

238.202.09 75 12 48 $155.76

238.202.11 100 6 12 $100.74

238.202.12 125 6 12 $131.34

238.202.13 150 6 12 $166.98

264.Funnel, Solvent AdditionDesign of funnel permits addition of solvents to flash chromatography columns without disturbing the silica-gel/packing layer. Lower end of the funnel is closed and the stem has a series of small holes through which the solvent drains. Top of the funnel is 90mm in diameter with the stem size as listed.

Cat no. Stem O.D. x length (mm) Pack Type Price/Each (CAD)

CS-F0291275 12 x 75 * Each $50.13

CS-F0291210 12 x 100 * Each $55.08

CS-F0291975 19 x 75 * Each $55.53

CS-F0291910 19 × 100 * Each $56.89

CS-F0292810 28 × 100 * * Each $64.41

CS-F0292812 28 × 125 * * Each $65.96

Note

*Fit column with 24/40 joint or 35/20 joint.

** Fit column with large joint like 45/50 standard or 50/30 spherical joint.

FUNNELFILTER


Cat no.Top

Diameter (mm)

Disc Diameter

(mm)Porosity

Stem Length (mm)

Approx overall height (mm)

Pack Type

Price/Each (CAD)

239.202.01 40 10 C 145 180 Each $39.02

239.202.02 50 20 C 70 115 Each $81.16

239.202.03 50 20 M 70 115 Each $84.43

239.202.04 50 20 F 70 115 Each $85.78

239.202.05 75 30 C 75 145 Each $118.94

239.202.06 75 30 M 75 145 Each $118.94

239.202.07 75 30 F 75 145 Each $118.94

265.Filter Funnel, HirschThese conical funnel shape is very useful for preparation work, to concentrate crystal residue for re washing. The angle of funnel body facilitate the removal of precipitates.

FUNNELPRESSURE EQUALIZING




266.Funnel, Pressure EqualizingWith 1:5 Teflon® stopcock.

267.Funnel, Pressure Equalizing, Glass Stopcock, GraduatedWith a straight bore glass stopcock in pressure equalizing line, graduated.

Cat no. Capacity (mL) Joints PTFE Stopcock

bore (mm) Pack Type Price/Each (CAD)

CS-F0621425 25 14/20 2 Each $111.10

CS-F0621925 25 19/22 2 Each $113.06

CS-F0622425 25 24/40 2 Each $119.22

CS-F0621460 60 14/20 2 Each $113.06

CS-F0621960 60 19/22 2 Each $116.42

CS-F0622460 60 24/40 2 Each $145.53

CS-F0621125 125 14/20 2 Each $124.26

CS-F0629125 125 19/22 2 Each $127.62

CS-F0624125 125 24/40 2 Each $156.72

CS-F0629250 250 19/22 2 Each $172.76

CS-F0624250 250 24/40 2 Each $177.99

CS-F0624500 500 24/40 4 Each $191.90

CS-F062241L 1000 24/40 4 Each $230.38

Cat no. Capacity (mL) Joints Stopcock bore


CS-F0671425G 25 14/20 2 Each $135.34

CS-F0671925G 25 19/22 2 Each $135.34

CS-F0671460G 60 14/20 2 Each $135.34

CS-F0671960G 60 19/22 2 Each $137.36

CS-F0672460G 60 24/40 2 Each $141.50

CS-F0671125G 125 14/20 2 Each $147.99

CS-F0679125G 125 19/22 2 Each $161.60

CS-F0674125G 125 24/40 2 Each $169.26

CS-F0679250G 250 19/22 2 Each $180.79

CS-F0674250G 250 24/40 2 Each $186.05

CS-F0674500G 500 24/40 4 Each $201.50

CS-F067241LG 1000 24/40 4 Each $222.87

FUNNEL PRESSURE EQUALIZING




268.Funnel, Pressure Equalizing, Teflon® StopcockWith straight bore Teflon® stopcock in pressure equalizing line, graduated.

Cat no. Capacity (mL) Joints Stopcock bore


CS-F0671425 25 14/20 2 Each $166.80

CS-F0671925 25 19/22 2 Each $169.03

CS-F0671460 60 14/20 2 Each $169.03

CS-F0671960 60 19/22 2 Each $169.03

CS-F0672460 60 24/40 2 Each $195.90

CS-F0671125 125 14/20 2 Each $179.11

CS-F0679125 125 19/22 2 Each $189.98

CS-F0674125 125 24/40 2 Each $198.14

CS-F0679250 250 19/22 2 Each $203.01

CS-F0674250 250 24/40 2 Each $209.33

CS-F0674500 500 24/40 4 Each $228.41

CS-F067241L 1000 24/40 4 Each $266.79

269.Funnel, Pressure Equalizing, High vacuum ValveWith Teflon® extended tip valve for semi-needle valve adjustment.


CS-F0641425 25 14/20 Each $137.47

CS-F0641460 60 14/20 Each $137.47

CS-F0641960 60 19/22 Each $142.73

CS-F0642460 60 24/40 Each $167.24

CS-F0641125 125 14/20 Each $142.95

CS-F0649125 125 19/22 Each $146.31

CS-F0644125 125 24/40 Each $170.94

CS-F0649250 250 19/22 Each $180.99

CS-F0644250 250 24/40 Each $185.49

FUNNELSEPARATORY


270.Funnel, Separatory, Teflon® StopcockSupplied with a Glass or Polypropylene (P.P) stopper.

With Flask Length Joint


Stopper Joints

PTFE Stopcock

(mm)Stopper Pack Type Price/Each

(CAD)

CS-F0471330 30 No.13 2 P.P Each $81.50

CS-F0471330A 30 No. 13 2 Glass Each $81.50

CS-F0471660 60 No. 16 2 P.P Each $103.94


CS-F0472125 125 No. 22 2 P.P Each $103.94


CS-F0472250 250 No.22 4 P.P Each $119.07

CS-F0472250A 250 No.22 4 Glass Each $119.07

CS-F0477500 500 No. 27 4 P.P Each $136.76


CS-F0477000 1000 No.27 4 P.P Each $188.65


CS-F0478000 2000 No. 38 6 P.P Each $272.22


271.Funnel Separatory, AmberWith 2mm Teflon® stopcock. Supplied with a glass stopper or Polypropylene (P.P) stopper.

Cat no. Capacity (mL) Pack Type

Price/Each (CAD)

CS-F0474125AG 125 Each $174.37

CS-F0474250AG 250 Each $192.21

CS-F0474500AG 500 Each $226.77

FUNNELSEPARATORY


272.Funnel separatoryWith 2mm Teflon® stopcock. Supplied with a glass stopper or Polypropylene (P.P) stopper.

Cat no. Capacity (mL) Joints

PTFE Stopcock

(mm)Stopper Pack

TypePrice/Each

(CAD)

CS-F0451025 25 14/20 2 P.P Each $93.96

CS-F0451025A 25 14/20 2 Glass Each $93.96

CS-F0459025 25 19/22 2 P.P Each $94.26

CS-F0459025A 25 19/22 2 Glass Each $94.26

CS-F0451050 50 14/20 2 P.P Each $94.80

CS-F0451050A 50 14/20 2 Glass Each $94.80

CS-F0459050 50 19/22 2 P.P Each $96.20

CS-F0459050A 50 19/22 2 Glass Each $96.20

CS-F0451125 125 14/20 2 P.P Each $96.86

CS-F0451125A 125 14/20 2 Glass Each $96.86

CS-F0459125 125 19/22 2 P.P Each $100.43

CS-F0459125A 125 19/22 2 Glass Each $100.43

CS-F0454125 125 24/40 2 P.P Each $104.42

CS-F0454125A 125 24/40 2 Glass Each $104.42

CS-F0451250 250 14/20 4 P.P Each $108.60

CS-F0451250A 250 14/20 4 Glass Each $108.60

CS-F0459250 250 19/22 4 P.P Each $111.93

CS-F0459250A 250 19/22 4 Glass Each $111.93

CS-F0454250 250 24/40 4 P.P Each $119.19

CS-F0454250A 250 24/40 4 Glass Each $119.19

CS-F0454500 500 24/40 4 P.P Each $184.80

CS-F0454500A 500 24/40 4 Glass Each $184.80


273.Funnel, Separatory Sure-GripGlobe shaped separatory funnel with a long stopper neck and straight section between the funnel body and stopcock, which provides a secure grip while shaking and also aids in clamping. Available with Teflon® stopcocks. Supplied complete with one listed size P.P or hollow glass stopper.


Stopper size

PTFE Stopcock (mm) Stopper Pack

TypePrice/Each

(CAD)CS-F0687500G 500 27 4 Glass Each $125.24

CS-F0687500 500 27 4 P.P Each $132.62

CS-F0687000G 1000 27 4 Glass Each $167.04

CS-F0687000 1000 27 4 P.P Each $175.87

CS-F068272LG 2000 27 4 Glass Each $209.51

CS-F068272L 2000 27 4 P.P Each $222.64

FUNNELSEPARATORY


274.Funnel, Separatory, Teflon® Stopcock, Cylindrical ShapedCylindrical shaped separatory funnel having a lower standard taper inner joint and a top outer joint, both being the same size. Graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper.

275.Cylindrical Funnel, Separatory, GraduatedThe cylindrical shaped funnel separatory graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Supplied complete with listed size stopper.

Cat no. Capacity (mL) Joints PTFE

Stopcock (mm)Pack Type

Price/Each (CAD)

CS-FC475014 50 14/20 2 Each $139.45

CS-FC471224 125 24/40 2 Each $182.30

CS-FC472540 250 24/40 2 Each $195.25

CS-FC475024 500 24/40 4 Each $233.25

Cat no. Capacity (mL) Stopper size PTFE Stopcock

bore (mm) Pack Type Price/Each (CAD)

CS-FC456016 60 16 2 Each $117.45

CS-FC451222 125 22 2 Each $117.45

CS-FC452522 250 22 2 Each $156.60

CS-FC455027 500 27 4 Each $185.90

CS-FC451027 1000 27 4 Each $206.55

FUNNELBUCHNER


276.Buchner Funnel, PorcelainThese funnels are glazed inside and outside with the exception of the rim and without a cover. These are autoclavable and highly resistant to chemical attack. Material : Porcelain


Overall Height (mm)

Plate Dia

(mm)

Dia. of Perforated Area (mm)

Fits Paper Dia. (mm)

Pack Type

Price/Each (CAD)

584.303.01 2 64 14.5 11 13 6 $84.90

584.303.02 30 89 43 32 42.5 6 $34.73

584.303.03 87 112 56 42 55 6 $41.90

584.303.04 186 143 83 60 75 4 $55.80

584.303.05 320 160 100 77 90 4 $72.80

584.303.06 550 195 114 95 110 2 $89.50

584.303.07 700 202 126 105 125 1 $122.00

277.Funnel, Filter, Buchner, JacketedWith jacket enclosing entire funnel bowl and upper part of stem. Circulation of liquid through the jacket permits warming or cooling of funnel and contents during filtration.

Cat no. Capacity (mL) Porosity Overall

Height (mm) Pack Type Price/Each (CAD)

CS-F0513030C 30 Coarse 147 Each $299.31

CS-F0513030M 30 Medium 147 Each $299.31

CS-F0514060C 60 Coarse 161 Each $344.25

CS-F0514060M 60 Medium 161 Each $344.25

CS-F0516150C 150 Coarse 187 Each $368.63

CS-F0516150M 150 Medium 187 Each $368.63

Please ask for any specific sizes not listed here.

FUNNELBUCHNER



278.Filter Funnel, Buchner, Perforated PlateWith sealed-in perforated glass disc to support filter media. Pressure may be used but should not exceed 15 psi. This design solves the contamination problem with fritted disc and also the blindness problem with ceramic Buchner funnel.

Cat no. Glass Disc Size (mm) Capacity Pack Type Price/Each

(CAD)CS-F0804260 42 60 Each $102.50

CS-F0806150 60 150 Each $137.56

CS-F0808350 80 350 Each $173.19

CS-F0809600 90 600 Each $225.00

279.Filter Funnel, Buchner, Inner Joint, Perforated Plate

Cat no. Capacity (mL) Joint Size Glass Disc Size (mm) Pack Type Price/Each

(CAD)CS-F0963014 30 14/20 32 Each $100.69

CS-F0963019 30 19/22 32 Each $125.31

CS-F0963024 30 24/40 32 Each $125.31

CS-F0964014 60 14/20 42 Each $103.19

CS-F0964019 60 19/22 42 Each $130.69

CS-F0964024 60 24/40 42 Each $130.69

CS-F0966019 150 19/22 60 Each $190.31

CS-F0966024 150 24/40 60 Each $190.31

CS-F0968024 350 24/40 80 Each $247.50

CS-F0969024 600 24/40 90 Each $265.63

FUNNEL BUCHNER



280.Filter Funnel, Buchner, Inner JointNot recommended for filtration where pressure would exceed 15psi.

Cat no. Capacity (mL) Joints Frit O.D.

(mm) Porosity Pack Type Price/Each (CAD)

CS-F0362014C 15 14/20 20 C Each $78.24

CS-F0362014M 15 14/20 20 M Each $78.24

CS-F0362014F 15 14/20 20 F Each $77.47

CS-F0362019C 15 19/22 20 C Each $88.04

CS-F0362019M 15 19/22 20 M Each $88.04

CS-F0362019F 15 19/22 20 F Each $88.04

CS-F0362024C 15 24/40 20 C Each $113.49

CS-F0362024M 15 24/40 20 M Each $113.49

CS-F0362024F 15 24/40 20 F Each $113.49

CS-F0363014C 30 14/20 30 C Each $82.27

CS-F0363014M 30 14/20 30 M Each $82.27

CS-F0363014F 30 14/20 30 F Each $82.26

CS-F0363019C 30 19/22 30 C Each $90.10

CS-F0363019M 30 19/22 30 M Each $90.10

CS-F0363019F 30 19/22 30 F Each $90.10

CS-F0363024C 30 24/40 30 C Each $120.17

CS-F0363024M 30 24/40 30 M Each $120.17

CS-F0363024F 30 24/40 30 F Each $120.17

CS-F0364014C 60 14/20 40 C Each $84.28

CS-F0364014M 60 14/20 40 M Each $84.28

CS-F0364014F 60 14/20 40 F Each $84.29

CS-F0364019C 60 19/22 40 C Each $94.12

CS-F0364019M 60 19/22 40 M Each $94.12

CS-F0364019F 60 19/22 40 F Each $94.13

CS-F0364024C 60 24/40 40 C Each $126.84

CS-F0364024M 60 24/40 40 M Each $126.84

CS-F0364024F 60 24/40 40 F Each $126.84

CS-F0366019C 150 19/22 60 C Each $154.32

CS-F0366019M 150 19/22 60 M Each $154.32

CS-F0366019F 150 19/22 60 F Each $154.32

CS-F0366024C 150 24/40 60 C Each $164.63

CS-F0366024M 150 24/40 60 M Each $164.63

CS-F0366024F 150 24/40 60 F Each $164.63

CS-F0368024C 350 24/40 80 C Each $238.75

CS-F0368024M 350 24/40 80 M Each $238.75

CS-F0368024F 350 24/40 80 F Each $238.75

CS-F0369024C 600 24/40 90 C Each $287.47

CS-F0369024M 600 24/40 90 M Each $287.47

CS-F0369024F 600 24/40 90 F Each $287.47

FUNNELBUCHNER


281.Filter Funnel, BuchnerWith sealed-in glass disc of the listed porosity. Not recommended for filtration where pressure would exceed 15psi. C-coarse, M-medium, F-Fine porosity.

Cat no. Capacity (mL) Disc O.D. (mm) Porosity Pack Type Price/Each (CAD)

CS-F0601002C 2 10 C Each $34.71

CS-F0601002M 2 10 M Each $34.71

CS-F0601002F 2 10 F Each $34.71

CS-F0602015C 15 20 C Each $38.99

CS-F0602015M 15 20 M Each $38.99

CS-F0602015F 15 20 F Each $38.99

CS-F0603030C 30 30 C Each $43.93

CS-F0603030M 30 30 M Each $43.93

CS-F0603030F 30 30 F Each $43.93

CS-F0604060C 60 40 C Each $48.47

CS-F0604060M 60 40 M Each $48.47

CS-F0604060F 60 40 F Each $48.47

CS-F0606150C 150 60 C Each $86.52

CS-F0606150M 150 60 M Each $86.52

CS-F0606150F 150 60 F Each $86.52

CS-F0608350C 350 80 C Each $119.56

CS-F0608350M 350 80 M Each $119.56

CS-F0608350F 350 80 F Each $122.08

CS-F0609600C 600 90 C Each $143.36

CS-F0609600M 600 90 M Each $143.36

CS-F0609600F 600 90 F Each $145.88

CS-F0601000C 1000 110 C Each $237.60

CS-F0601000M 1000 110 M Each $237.60

CS-F0601000F 1000 110 F Each $237.60

GAS DISPERSION TUBE

282.Gas Dispersion Tube, FrittedStem is 8mm O.D. × 150mm length.

283.Gas Dispersion Tube, Fritted, 15° AngleThe 15° angle permits tube to be inserted into vessels where a large opening is not available. Stem is 8mm O.D. × 150mm length.

Cat no. Disc. Dia. (mm) Porosity Pack Type Price/Each (CAD)

CS-G0260810C 10 C Each $28.98

CS-G0260810M 10 M Each $28.98

CS-G0260820C 20 C Each $35.35

CS-G0260820M 20 M Each $35.35

CS-G0260830C 30 C Each $38.13

CS-G0260830M 30 M Each $38.13

CS-G0260840C 40 C Each $56.56

CS-G0260840M 40 M Each $56.56

Cat no. Disc. Dia. (mm)

Opening Required (mm) Porosity Pack Type Price/Each

(CAD)CS-G0271018C 10 18 C Each $37.46

CS-G0271018M 10 18 M Each $37.46

CS-G0272025C 20 25 C Each $42.90

CS-G0272025M 20 25 M Each $42.90

CS-G0273035C 30 35 C Each $48.29

CS-G0273035M 30 35 M Each $48.29

CS-G0274045C 40 45 C Each $55.72

CS-G0274045M 40 45 M Each $55.72


284.Gas Dispersion Tube, Fritted, 90° AngleThe 90° angle permits bubbles to be spread over a large area. Stem is 8mm O.D. × 150 length.

Cat no. Disc. Dia. (mm)

Opening Required (mm) Porosity Pack Type Price/Each

(CAD)CS-G0282035C 20 35 C Each $42.90

CS-G0282035M 20 35 M Each $42.90

CS-G0283045C 30 45 C Each $48.29

CS-G0283045M 30 45 M Each $48.29

CS-G0284060C 40 60 C Each $55.72

CS-G0284060M 40 60 M Each $55.72

GAS DISPERSION TUBE


MANIFOLDVACUUM/INERT GAS, DOUBLE

285.Manifold, Vacuum/Inert Gas, Double

286.Manifold, Vacuum/Inert Gas, Double, With Front-Left & Rear-Right

Cat no. Number of Ports

Valve Orifice (mm)

Overall Width (mm)

Pack Type

Price/Each (CAD)

CS-M0111003 3 0-4 350 Each $612.58

CS-M0111004 4 0-4 450 Each $732.75

CS-M0111005 5 0-4 550 Each $826.32


Valve Orifice (mm)

Overall Width (mm)

Pack Type

Price/Each (CAD)

CS-M0171003 3 0-4 350 Each $601.17

CS-M0171004 4 0-4 450 Each $721.34

CS-M0171005 5 0-4 550 Each $814.91

General purpose double bank manifold for use with vacuum and inert gas. Supplied with 0-4mm high vacuum valves for grease-free operation. Both banks are made from 22mm medium wall tubing and have all banks open. Ports are spaced 100mm center to center and have an O.D. of 10mm.

General purpose double bank manifold for use with vacuum and inert gas. Supplied with 0-4mm high vacuum valves for grease-free operation. Both banks are made from 22mm medium wall tubing and have all banks open. Ports are spaced 100mm with front-left & rear-right O.D. of 10mm.


287.Manifold, Vacuum/Inert Gas, Double, With Front-Right & Rear-Left

288.Manifold, Vacuum/Inert Gas, Double, With Front-Left-Right & Rear-Left


Valve Orifice (mm)

Overall Width (mm)

Pack Type

Price/Each (CAD)

CS-M0141003 3 0-4 350 Each $601.17

CS-M0141004 4 0-4 450 Each $721.34

CS-M0141005 5 0-4 550 Each $814.91


Valve Orifice (mm)

Overall Width (mm)

Pack Type

Price/Each (CAD)

CS-M0101003 3 0-4 350 Each $601.17

CS-M0101004 4 0-4 450 Each $721.34

CS-M0101005 5 0-4 550 Each $814.91


General purpose double bank manifold for use with vacuum and inert gas. Supplied with 0-4mm high vacuum valves for grease-free operation. Both banks are made from 22mm medium wall tubing and have all banks open. Ports are spaced 100mm with front-right and rear-left 10mm hose connections.

General purpose double bank manifold for use with vacuum and inert gas. Supplied with 0-4mm high vacuum valves for grease-free operation. Both banks are made from 22mm medium wall tubing and have all banks open. Ports are spaced 100mm with front-left-right and rear-left 10mm hose connections.



289.Manifold, Vacuum/Inert Gas, Double, With Front-Left-Right & Rear-Right


Valve Orifice (mm)

Overall Width (mm)

Pack Type

Price/Each (CAD)

CS-M0471003 3 0-4 350 Each $601.17

CS-M0471004 4 0-4 450 Each $721.34

CS-M0471005 5 0-4 550 Each $814.91

General purpose double bank manifold for use with vacuum and inert gas. Supplied with 0-4mm high vacuum valves for grease-free operation. Both banks are made from 22mm medium wall tubing and have all banks open. Ports are spaced 100mm with front-left-right and rear-right 10mm hose connections.


290.Manifold, Vacuum/Inert Gas, All Glass, Front-Left-Right & Rear-Left-Right

291.Manifold, Vacuum/Inert Gas, All Glass, Front-Left & Rear-Right

Cat no. Number of Ports Overall Width (mm) Pack Type

Price/Each (CAD)

CS-M0411003 3 350 Each $567.84

CS-M0411004 4 450 Each $739.36

CS-M0411005 5 550 Each $899.21


Price/Each (CAD)

CS-M0181003 3 350 Each $524.37

CS-M0181004 4 450 Each $681.28

CS-M0181005 5 550 Each $829.40

MANIFOLDVACUUM/INERT GAS, ALL GLASS

With 4mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels. Beams are 22mm O.D. with front-left-right and rear-left-right 10mm hose connections. Distance between stopcocks is 100mm center to center.

With 4mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels. Beams are 22mm O.D. with front-left and rear-right 10mm hose connections. Distance between stopcocks is 100mm center to center.



Price/Each (CAD)

CS-M0421003 3 350 Each $480.48

CS-M0421004 4 450 Each $623.70

CS-M0421005 5 550 Each $758.95

292.Manifold, Vacuum/Inert Gas, All Glass, Front-Right & Rear-Left


293.Manifold, Vacuum/Inert Gas, All Glass, Front-Left-Right & Rear-Left


Price/Each (CAD)

CS-M0401003 3 350 Each $524.37

CS-M0401004 4 450 Each $681.28

CS-M0401005 5 550 Each $829.40

With 4mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels. Beams are 22mm O.D. with front-right and rear-left- 10mm hose connections. Distance between stopcocks is 100mm center to center.

With 4mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels. Beams are 22mm O.D. with front-left-right and rear-left 10mm hose connections. Distance between stopcocks is 100mm center to center.


294.Manifold, Vacuum/Inert Gas, All Glass, Front-Left & Rear-Left-Right

295.Manifold, Vacuum/Inert Gas, All Glass, Front-Left-Right & Rear-Right


Price/Each (CAD)

CS-M0431003 3 350 Each $480.48

CS-M0431004 4 450 Each $623.70

CS-M0431005 5 550 Each $758.95


Price/Each (CAD)

CS-M0441003 3 350 Each $480.48

CS-M0441004 4 450 Each $623.70

CS-M0441005 5 550 Each $758.95


With 4mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels. Beams are 22mm O.D. with front-left and rear-left-right 10mm hose connections. Distance between stopcocks is 100mm center to center.

With 4mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels. Beams are 22mm O.D. with front-left-right and rear-right 10mm hose connections. Distance between stopcocks is 100mm center to center.



Price/Each (CAD)

CS-M0451003 3 350 Each $480.48

CS-M0451004 4 450 Each $623.70

CS-M0451005 5 550 Each $758.95


296.Manifold, Vacuum/Inert Gas, All Glass, Front-Right & Rear-Left-Right

With 4mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels. Beams are 22mm O.D. with front-right and rear-left-right 10mm hose connections. Distance between stopcocks is 100mm center to center.


297.Manifold, High Vacuum Solid Glass Stopcock, Front-Left-Right & Rear-Left-Right

298.Manifold, High Vacuum Solid Glass Stopcocks, Front-Left & Rear-Right


Price/Each (CAD)

CS-M0250003 3 350 Each $524.37

CS-M0250004 4 450 Each $681.28

CS-M0250005 5 550 Each $829.40


Price/Each (CAD)

CS-M0230003 3 350 Each $477.95

CS-M0230004 4 450 Each $621.28

CS-M0230005 5 550 Each $756.47

MANIFOLDHIGH VACUUM SOLID GLASS STOPCOCK

With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Beams are 22mm O.D. with front-left-right and rear-left-right 10mm hose connections. Distance between stopcocks is 100mm center to center.

With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Beams are 22mm O.D. with front-left and rear-right 10mm hose connections. Distance between stopcocks is 100mm center to center.



299.Manifold, High Vacuum Solid Glass Stopcocks, Front-Right & Rear-Left

300.Manifold, High Vacuum Solid Glass Stopcocks, Front-Left-Right & Rear-Left


Price/Each (CAD)

CS-M0240003 3 350 Each $477.95

CS-M0240004 4 450 Each $621.28

CS-M0240005 5 550 Each $756.47


Price/Each (CAD)

CS-M0260003 3 350 Each $477.95

CS-M0260004 4 450 Each $621.28

CS-M0260005 5 550 Each $756.47

With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Beams are 22mm O.D. with front-right and rear-left 10mm hose connections. Distance between stopcocks is 100mm center to center.

With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Beams are 22mm O.D. with front-left-right and rear-left 10mm hose connections. Distance between stopcocks is 100mm center to center.


301.Manifold, High Vacuum Solid Glass Stopcocks, Front-Left & Rear-Left-Right

302.Manifold, High Vacuum Solid Glass Stopcocks, Front-Left-Right & Rear-Right


Price/Each (CAD)

CS-M0280003 3 350 Each $477.95

CS-M0280004 4 450 Each $621.28

CS-M0280005 5 550 Each $756.47


Price/Each (CAD)

CS-M0290003 3 350 Each $477.95

CS-M0290004 4 450 Each $621.28

CS-M0290005 5 550 Each $756.47


With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Beams are 22mm O.D. with front-left and rear-left-right 10mm hose connections. Distance between stopcocks is 100mm center to center.

With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Beams are 22mm O.D. with front-left-right and rear-right 10mm hose connections. Distance between stopcocks is 100mm center to center.



303.Manifold, High Vacuum Solid Glass Stopcocks, Front-Right & Rear-Left-Right


Price/Each (CAD)

CS-M0300003 3 350 Each $477.95

CS-M0300004 4 450 Each $621.28

CS-M0300005 5 550 Each $756.47

With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Beams are 22mm O.D. with front-right and rear-left-right 10mm hose connections. Distance between stopcocks is 100mm center to center.


304.Vacuum Manifold, Teflon® Stopcocks, Hose Connection At Right Side

305.Vacuum Manifold, Teflon® Stopcocks, Hose Connection At Left End

Cat no. Number of Ports Stopcock Bore (mm) Pack Type

Price/Each (CAD)

CS-M0190042 4 2 Each $292.99

CS-M0190044 4 4 Each $337.79

CS-M0190062 6 2 Each $439.49

CS-M0190064 6 4 Each $489.56


Price/Each (CAD)

CS-M0500042 4 2 Each $292.99

CS-M0500044 4 4 Each $337.79

CS-M0500062 6 2 Each $439.49

CS-M0500064 6 4 Each $489.56

MANIFOLDVACUUM, TEFLON® STOPCOCK

General purpose manifold with 2mm or 4mm Teflon® stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at right side. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 100mm.

General purpose manifold with 2mm or 4mm Teflon® stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at left side. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 100mm.


MANIFOLDVACUUM, TEFLON® STOPCOCK

306.Vacuum Manifold, Teflon® Stopcocks, Hose Connection At Both Ends


Price/Each (CAD)

CS-M0490042 4 2 Each $302.78

CS-M0490044 4 4 Each $327.80

CS-M0490062 6 2 Each $413.11

CS-M0490064 6 4 Each $457.16

General purpose manifold with 2mm or 4mm Teflon® stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at both ends. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 100mm.


307.Vacuum Manifold, High Vacuum Valves, Hose Connection At Right Side

308.Vacuum Manifold, High Vacuum Valves, Hose Connection At Left Side


Stopcock Bore (mm)

Overall Width (mm)

Pack Type

Price/Each (CAD)

CS-M0522403 3 0-4 325 Each $504.97

CS-M0522404 4 0-4 425 Each $561.00

CS-M0522405 5 0-4 525 Each $618.52

MANIFOLDHIGH VACUUM VALVES

With a serrated hose connection (10mm O.D.) at right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.

With a serrated hose connection (10mm O.D.) at left hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.



Stopcock Bore (mm)

Overall Width (mm)

Pack Type

Price/Each (CAD)

CS-M0202403 3 0-4 325 Each $504.97

CS-M0202404 4 0-4 425 Each $561.00

CS-M0202405 5 0-4 525 Each $618.52

MANIFOLDHIGH VACUUM VALVES

309.Vacuum Manifold, High Vacuum Valves, Hose Connection At Both Ends


Stopcock Bore (mm)

Overall Width (mm)

Pack Type

Price/Each (CAD)

CS-M0512403 3 0-4 325 Each $510.02

CS-M0512404 4 0-4 425 Each $566.61

CS-M0512405 5 0-4 525 Each $624.71

With a serrated hose connection (10mm O.D.) at both ends. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.


310.Manifold, Nitrogen/Argon Line, Teflon®, Both Ends Hose Connections

311.Manifold, Nitrogen/Argon Line, Teflon®, Left Hose Connection


Stopcock Bore (mm) Joints Pack

TypePrice/Each

(CAD)CS-M0211042 4 2 14/20 Each $305.09

CS-M0211044 4 4 14/20 Each $349.20


Stopcock Bore (mm) Joints Pack

TypePrice/Each

(CAD)CS-M0531042 4 2 14/20 Each $257.24

CS-M0531044 4 4 14/20 Each $327.58



MANIFOLDNITROGEN/ARGON LINE, TEFLON®

With 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment cutting down on the number used. Main tube is 22mm O.D. with both ends connections (10mm). Delivery ports have 8mm hose connections.

With a serrated hose connection (10mm O.D.) at left hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.


MANIFOLDNITROGEN/ARGON LINE, TEFLON®


312.Manifold, Nitrogen/Argon Line, Teflon®, Right Hose Connection

Cat no. Number of Ports Stopcock Bore (mm) Joints Pack

TypePrice/Each

(CAD)CS-M0541042 4 2 14/20 Each $257.24

CS-M0541044 4 4 14/20 Each $327.58

With 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment cutting down on the number used. Main tube is 22mm O.D. with right hose connections (10mm). Delivery ports have 8mm hose connections.


313.Manifold, Vacuum, Single Body, Right Hand

314.Manifold, Vacuum, Single Body, Left Hand


CS-M0221420 14/20 Each $572.06

CS-M0221922 19/22 Each $591.30

CS-M0222440 24/40 Each $610.19


CS-M0321420 14/20 Each $572.06

CS-M0321922 19/22 Each $591.30

CS-M0322440 24/40 Each $610.19



MANIFOLDVACUUM, SINGLE BODY

With four high vacuum solid glass stopcocks of 4mm bore and inner joints. A 4mm T-bore high vacuum stopcock is at the inlet end of the main body which is 22mm O.D. All glass stopcocks have constant pressure retention devices.

With four high vacuum solid glass stopcocks of 4mm bore and inner joints. A 4mm T-bore high vacuum stopcock is at the inlet end of the main body which is 22mm O.D. All glass stopcocks have constant pressure retention devices.


MANIFOLDDOUBLE

315.Manifold, Double, Hollow Glass Stopcocks, Spherical Joints

316.Manifold, Double, Hollow Glass Stopcocks, Right Hand Side

Cat no. Number of Ports Overall Width (mm) PacK Type Price/Each (CAD)

CS-M0270003 3 280 Each $530.07

CS-M0270004 4 365 Each $686.99

CS-M0270005 5 450 Each $835.11

Cat no. Number of Ports Hose connection (mm) PacK Type Price/Each (CAD)

CS-M0340004 4 10 Each $635.60

With 35/20 ball joints and 4mm double oblique high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plugs. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels.

With high vacuum hollow glass stopcocks. The small O.D. (17mm) front tube is for inert gases and the larger O.D. (22mm) back tube is for vacuum, which has a 35/20 socket on the right hand side.


317.Manifold, Double, Hollow Glass Stopcocks, Left Hand Side

318.Manifold, Double, High Vacuum Valve and 35/20 Spherical Joint


CS-M0360004 Vacuum/gas manifold Each $721.34

Cat no. Number of Ports Hose connection (mm) PacK Type Price/Each (CAD)

CS-M0350004 4 10 Each $635.60

MANIFOLDDOUBLE

With high vacuum hollow glass stopcocks. The small O.D. (17mm) front tube is for inert gases and the larger O.D. (22mm) back tube is for vacuum, which has a 35/20 socket on the left hand side.

This manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.) with a 10mm hose connection. The rear tube is for vacuum (22mm O.D), with two 35/20 socket joints. Please order each component separately.


MANIFOLDWITH #15 - O RINGS

319.Manifold, With # 15 O-Ring Joints

320.Manifold, Vacuum, Single, With # 15 O-Ring Joints


CS-M0150004 Vacuum/gas manifold Each $697.95


CS-M0311508 Vacuum manifold, single bank Each $501.55

With 4mm double hollow high vacuum stopcocks. This four-port manifold is fitted with two 14/20 and two 24/40 inner joints, and is 100mm center to center joints. # 15 O-ring joint stopper (CS-S480015) and # 15 O-ring joint to serrated hose adapter have to be ordered separately. Viton® O-rings can be ordered using item # CS-R116.

Four ports are spaced 100mm center to center, with 0-8mm high vacuum valves mounted on 45° angle to the operator for easy Access. Overall width is 395mm. Adapter from # 15 O-ring joints to serrated hose connections. Standard taper components or stoppers are available in the following page and have to be ordered separately.

321.Manifold, Double Banks, With # 15 O-Ring Joints


CS-M0330804 Vacuum manifold, single bank Each $834.24

Forward facing 0-8mm high vacuum valves allow easy operation of manifold inside of a fume hood. Main parts are spaced 100mm center to center. Adapter components or stoppers are available in the following page and have to be ordered separately.


MANIFOLDACCESSORIES

322.Manifold, Solvent Transfer

323.Stopper, With #15 O-Ring Joint

Cat no. Joints Overall Height x Width (mm) Pack Type Price/Each (CAD)

CS-M0164380 24/40 140 × 380 Each $124.85


CS-S0480015 # 15 O-Ring Joint stopper Each $21.00

Supplied with high vacuum valve with PTFE O-ring at tip and PTFE wiper to protect Viton® O-Ring on shaft.

For use with manifolds having #15 O-ring joints. Supplied complete with one # 116(CS-R116) Viton® O-ring.

324.Adapter, #15 O-Ring Joint To Serrated Hose Connection

325.Adapter, #15 O-Ring Joint To Inner Joint


CS-M0131604 10mm O.D. Serrated hose connection Each $21.00

CS-M0131605 16mm O.D. Serrated hose connection Each $25.90


CS-M0131514 From #15 O-ring joint to: 14/20 inner joint Each $27.01




METAL & PLASTIC ACCESSORIES

326.Three Finger ClampsMade of chrome plated alloy with three PVC coated prongs.

327.Three Finger Double Adjust ClampDouble adjustable, PVC coated prongs. Made of chrome plated Zinc-Alloy or plastic coated alloy. Accept objects from 0 to 60mm(large), to 30mm(small).

328.Flexible Shank Three Finger ClampZinc alloy, Ni/Cr plated.

Cat no. Description Size (mm) Pack Type Price/Each (CAD)

CS-C0J170-20 Small 0 -25 Each $20.00

CS-C0J170-21 Medium 0 - 50 Each $20.00

Cat no. Description Size (mm) Pack Type Price/Each (CAD)

CS-F0W200-30 Small, Plated, Chrome Plated 0 - 30 Each $32.00

CS-F0W200-70 Large, Plated, Chrome Plated 0 - 70 Each $44.00

CS-F0W230-30 Small, Plated, Plastic 0 - 30 Each $28.00

CS-F0W230-70 Large, Plated, Plastic 0 - 70 Each $38.00

Cat no. Opening Pack Type Price/Each (CAD)

CS-F0W162-25 0/25 Each $65.00

CS-F0W162-40 10/40 Each $75.00

CS-F0W162-80 25/80 Each $85.00

329.Two Prong Extension Clamps (Small)Made of Ni/Cr plated zinc alloy, PVC coated prongs.

330.Two Prong Extension Clamps (Medium)Made of Ni/Cr plated zinc alloy, PVC coated prongs.


CS-F0W100-25 Accept articles from 7 to 25mm Each $24.00


CS-F0W100-45 Accept articles from 12 to 45mm Each $36.00


331.Three Finger Double Adjust Swivel Clamp (large)With bosshead for rod max. dia. Up to 21mm.

332.Suspension ClampHold thermometers, drying tubes or other item.



CS-S0C350-10 Single prong Each $30.00

CS-S0C350-11 Single, with Bosshead plastic coated Each $40.00

CS-S0C350-20 Double prong Each $60.00

Cat no. Description Size(mm) Pack Type Price/Each (CAD)

CS-S0W200-70 Large 0 - 70 Each $53.00

CS-S0W200-30 Small 0 - 30 Each $44.00

333.Thermometer Extension Clamp

Cat no. Description Length (mm) Pack Type Price/Each (CAD)

CS-S0T200-15 Extension rod 10mm in dia. 200 Each $33.00

334.Thermometer Swivel Clamp

335.Bross Head, Black Plated Finish


CS-S0T120-15 With adjustable bosshead Each $40.00

Cat no. For Rods Dia. Pack Type Price/Each (CAD)

CS-C0B203-13 13mm Each $30.00

CS-C0B203-16 16mm Each $32.00

CS-C0B203-21 21mm Each $36.00

CS-C0B203-25 25mm Each $40.00



336.Extension ClampTwo prong double adjust extension clamp, die-cast alloy, chrome plated.

337.Swivel ClampTwo prong double adjust swivel clamp for large and small articles.

338.Flexible Clamp With Rotable BossheadManufactured from Zinc Die Casting. Ni/Cr Plated.

339.Alloy Test Tube & Thermometer HolderChrome plated alloy, with spring loaded jaws. For tube 0-25mm.

Cat no. Size Max Opening(mm) Pack Type Price/Each (CAD)

CS-F0T260-40 Small 40 Each $24.00

CS-F0T260-65 Large 65 Each $36.00

Cat no. Size Max Opening(mm) Pack Type Price/Each (CAD)

CS-S0T260-40 Small 40 Each $32.00

CS-S0T260-65 Large 65 Each $44.00

Cat no. Span Width (mm) Model Pack Type Price/Each

(CAD)CS-S0W500-40 0 - 40 Three prong Each $50.00

CS-S0W500-25 12 - 25 Round Each $55.00

Cat no. Model Pack Type Price/Each (CAD)

CS-F0D100-25 Chromed Each $40.00

340.Test Tube & Thermometer Swivel Holder (Alloy)Chrome plated alloy, with bosshead and spring loaded jaws. For tube 0-25mm.

Cat no. Model Pack Type Price/Each (CAD)

CS-S0D100-25 Chromed Each $55.00



341.Spring Tubing ClampsCenter hinged spring and acetyl plastic, provided on/off flow control for flexible tubing.

Cat no. For Tubing Dia. Pack Type Price/Each (CAD)

CS-T0C300-08 0-8mm Each $28.00

CS-T0C300-12 0-12mm Each $34.00

342.Mohr’s Tubing Clip (spring steel)According to Mohr, made of spring steel.

Cat no. Model Total Length (mm) Pack Type Price/Each

(CAD)CS-T0C100-14 Plated steel 45 Each $10.00

CS-T0C100-24 AISI304 60 Each $15.00

343.Hoffman’s Tubing Clip Hoffman type, brass made, bottom hinged and nickel plated. Allow variable flow control.

Cat no. Max Opening(mm) Pack Type Price/Each (CAD)

CS-T0H200-12 12 Each $13.00

CS-T0H200-17 17 Each $15.00

CS-T0H200-20 20 Each $16.00

CS-T0H200-25 25 Each $18.00

CS-T0H200-30 30 Each $19.00

CS-T0H200-40 40 Each $21.00

CS-T0H200-50 50 Each $22.00

344.Dish ForcepMade of AISI304, three finger type for stable operation.

Cat no. Total Length(mm) Pack Type Price/Each (CAD)

CS-T0B400-10 240 Each $15.00

CS-T0B400-20 300 Each $20.00



345.Crucible Tongs, Stainless SteelFlat hinge, Bowed type, Dimension given is overall length.

346.Crucible Tongs, Stainless SteelFlat hinge, Straight type, Dimension given is overall length.

347.Breaker Tong

Cat no. Total Length (mm) Pack Type Price/Each (CAD)

CS-T0A600-150 150 Each $22.00

CS-T0A600-200 200 Each $27.00

CS-T0A600-220 220 Each $32.00

CS-T0A600-250 250 Each $35.00

CS-T0A600-300 300 Each $38.00

CS-T0A600-350 350 Each $42.00

CS-T0A600-400 400 Each $48.00

CS-T0A600-450 450 Each $52.00

CS-T0A600-500 500 Each $60.00

CS-T0A600-600 600 Each $78.00

Cat no. Total Length (mm) Pack Type Price/Each (CAD)

CS-T0A800-150 150 Each $22.00

CS-T0A800-200 200 Each $27.00

CS-T0A800-220 220 Each $32.00

CS-T0A800-250 250 Each $35.00

CS-T0A800-300 300 Each $38.00

CS-T0A800-350 350 Each $42.00

Cat no. Model Material Pack Type Price/Each (CAD)

CS-C0J205-30 A PVC (Red or Blue Colour) Each $15.00

CS-T0B600-10 B Rubber (Blue Colour) Each $18.00

CS-T0B600-20 C Three Jaw, PVC Each $21.00

CS-T0B600-10 D Glass fibre Sleeve Each $50.00


348.Spherical Joint Pinch ClampsSpring closing action. Unique forked shaped jaws provide uniform compression for safe, leak - free seals. Screw locking device for maximum security. Stainless steel bright polished finish for years of chemical resistance.

349.Beaker TongMade of AISI304, fibreglass sleeve for high temperature protect.

350.Metal Standard Taper ClipsSecurely hold conical joints under pressure. Nickel-plated steel, feature superior chemical and temperature resistance. Withstand temperatures up to 500° C (932° F).


Cat no. Size Pack Type Price/Each (CAD)

CS-C0S610-12 12 Each $22.80

CS-C0S610-18 18 Each $20.63

CS-C0S610-28 28 Each $24.77

CS-C0S610-35 35 Each $27.67

CS-C0S610-50 50 Each $59.96

CS-C0S610-65 65 Each $75.97

Cat no. Length(mm) Pack Type Price/Each (CAD)

CS-T0B500-10 250 Each $35.00

CS-T0B500-20 280 Each $40.00

Cat no. Size (mm) Pack Type Price/Each (CAD)

CS-C0C220-14 14 Each $10.00

CS-C0C220-19 19 Each $12.00

CS-C0C220-24 24 Each $12.00

CS-C0C220-29 29 Each $18.00

351.Teasing NeedleMade of plastic (POM).


CS-D0K110-10 Straight Tip Each $10.00

CS-D0K110-20 Curved Tip Each $13.00



352.Conical Head Keck ClipsMade of plastic (POM).

353.Conical Head Clips (s/s)Made of stainless steel, bright polished.

Cat no. To Fit Joint Size Colour Pack Type Price/Pack (CAD)

CS-C0C210-10 10/13 & 10/29 Green 10 $32.13

CS-C0C210-12 12/18 & 12/30 Purple 10 $33.44

CS-C0C210-14 14/20 & 14/35 Yellow 10 $28.13

CS-C0C210-19 19/22 & 19/38 Blue 10 $32.00

CS-C0C210-24 24/24 & 24/40 Green 10 $35.00

CS-C0C210-29 29/26 & 29/42 Red 10 $41.63

CS-C0C210-34 34/28 & 34/45 Orange 10 $43.44

CS-C0C210-40 40/35 & 40/50 Yellow 10 $49.06

CS-C0C210-45 45/50 Brown 10 $66.50

Cat no. Size Pack Type Price/Each (CAD)

CS-C0C200-10 10/19 Each $12.00

CS-C0C200-12 12/21 Each $12.20

CS-C0C200-14 14/23 Each $12.80

CS-C0C200-19 19/26 Each $13.00

CS-C0C200-24 24/29 Each $13.80

CS-C0C200-29 29/32 Each $14.50

CS-C0C200-45 45/40 Each $16.00

354.ForcepsOur forceps are made for the use in the laboratory. They are made of antimagnetic stainless steel, or made of magnetic stainless steel. The surface is highly polished.

Cat no. Length (mm) Pack Type Price/Each (CAD)

CS-F0C200-125 125 Each $12.50

CS-F0C200-140 140 Each $13.00

CS-F0C200-160 160 Each $15.00

CS-F0C200-180 180 Each $16.10

CS-F0C200-200 200 Each $18.00

CS-F0C200-250 250 Each $20.00


355.Laboratory ForcepsStainless Steel.


Cat no. Description Length (mm) Pack Type Price/Each (CAD)

CS-F0C210-125 (A) Straight forcep round tips 15 Each $10.00

CS-F0C211-120(B) Sprung straight

forcep with fine tips

120 Each $12.00

CS-F0C212-120 (C) Flat and wide tips 120 Each $12.00

CS-F0C213-126 (D) Fine tips 126 Each $12.30

CS-F0C214-102 (E) Straight forcep round tips 102 Each $11.50

A

B

C

D

E



356.Test Tube Rack (Plastic)Made of a blend of polypropylene. Locking feels allow racks to be stacked while not in use. Rows are numbered and lettered for tube identification.

357.Double Burette Clamp(Alloy)For two burettes from micro to 100mL size and self closing jaws without obscuring graduations. Die-cast, high strength alloy and plastic coated

Cat no. O.D (mm) Tubes Rows Pack Type Price/Each (CAD)

CS-A01989-1000 13 90 6x15 Each $30.00

CS-A01989-1001 16 60 5x12 Each $30.00

CS-A01989-1002 20 40 4x10 Each $31.00

CS-A01989-1003 25 24 3x8 Each $31.00

CS-A01989-1004 30 21 3x7 Each $33.00


CS-CB170-10 Die-cast, high strength alloy and plastic coated Each $35.24

180

358.Test Tube Racks (Plastic) One piece design which can be folded to shape by the user without the use of tools. Made of blend of polypropylene. Locking feels allow racks to be stacked while not in use. Rows are numbered and lettered for tube identification.

Cat no. O.D (mm) Tubes Rows Pack Type Price/Each (CAD)

CS-A01994-1000 13 90 6x15 Each $25.00

CS-A01994-1001 16 60 5x12 Each $25.00

CS-A01994-1002 20 40 4x10 Each $26.00

CS-A01994-1003 25 24 4x10 Each $26.00

CS-A01994-1004 30 21 3x8 Each $28.00



359.Horizon Pipette RackMade of PP, support 12 straight or small bulb pipette over 200mm long. Complete with two end pieces and three connecting rods for easily assembly.

Cat no. Pack Type Price/Each(CAD)

CS-T0T650-10 Each $14.00

181

360.Electrode Stand With Swivel ArmOlds up to four standard size electrodes and one ATC probe. Weighted base allows you to pivot holder 360 for more flexibility. Arm allows you to move electrode side to side or up and down while keeping electrode at a constant vertical angle.


CS-AA600-10 Round Base Each $70.00

361.Nessler Tube Rack

Cat no. Description Hole size (mm) Places Pack Type Price/Each

(CAD)CS-C0D950-06 Polymethyl 28 6 Each $15.00

362.Draining RackMade of plastic coated steel. Wire tips are PVC Covered.

Cat no. Position Size (High x Wide) Pack Type Price/Each

(CAD)CS-D0R650-50 55 650x360 Each $60.00

CS-D0R650-48 48 500x400 Each $55.00

CS-D0R650-32 32 300x400 Each $48.00



363.Laboratory Jacks Aluminium plates providing a rigid support platform. The scissor action movement is activated by a large control knob. CS-LJ450 have a tapped hole with locking nut in the top plate which accpets an M10 threaded retort rod.

364.Tripods, Triangular top(Stainless Steel)Height 200mm.

Cat no. Size (mm) Max Height (mm)

Max Static Load (kg) Pack Type Price/Each

(CAD)CS-LJ450-100 100 x 100 140 20 Each $90.00

CS-LJ450-150 150 x 150 280 60 Each $150.00

CS-LJ450-200 200 x 200 290 60 Each $180.00

CS-LJ450-250 200 x 250 380 60 Each $280.00

Cat no. Side Length Pack Type Price/Each (CAD)

CS-T0J110-125 125 Each $40.00

CS-T0J110-150 150 Each $45.00

CS-T0J110-200 200 Each $50.00

365.Retort Stand Base with Metal Sheet base (Stainless Steel) Metal sheet base, complete with rod.

Cat no. Base Size Rod Pack Type Price/Each (CAD)

CS-A0A400-175 175 x 100 450 x 9 mm Each $45.00

CS-A0A400-225 225 x 125 500 x 10 mm Each $48.00

CS-A0A400-230 230 x 130 600 x 10 mm Each $58.00

CS-A0A400-250 250 x 150 600 x 10 mm Each $75.00

CS-A0A400-300 300 x 150 700 x 12 mm Each $85.00



366.Tripods, Circular top(Stainless Steel)Height 200mm.

Cat no. Side Length Pack Type Price/Each (CAD)

CS-T0J130-125 125 Each $40.00

CS-T0J130-150 150 Each $45.00

CS-T0J130-200 200 Each $50.00

368.Rectangular Retort Stand Base Made of cast iron, with hole tapped M10x1.5mm and rubber feet in the short side.


CS-A0390-240 115 x 75 Each $30.00

CS-A0390-250 160 x 100 Each $35.00

CS-A0390-260 200 x 125 Each $45.00

CS-A0390-270 250 x 160 Each $55.00

CS-A0390-280 315 x 200 Each $65.00

369.Open Ring Retort Support Made of Ni/Cr plated steel.

Cat no. Ring Dia. Length Pack Type Price/Each (CAD)

CS-H0300-60 60mm 180mm Each $9.00

CS-H0300-80 80mm 195mm Each $10.00

CS-H0300-100 100mm 200mm Each $11.00

CS-H0300-120 120mm 215mm Each $12.00

CS-H0300-140 140mm 225mm Each $13.00

367.Tripod Retort Stand BasesCast iron finished in blue paint with rod hole tapped M10x1.5mm and rubber feet. Dimension given is approximate spread from rod to foot.

Cat no. Size(mm) Pack Type Price/Each (CAD)

CS-A0A320-85 85 Each $35.00

CS-A0A320-110 110 Each $45.00

CS-A0A320-135 135 Each $50.00

CS-A0A320-175 175 Each $70.00



370.Wire Gauze SquaresIron wire and square shape, Ceramic centers contains no asbestos.

Cat no. Size(mm) Pack Type Price/Each (CAD)

Open Mesh (AISI304)

CS-C0P900-100 100 x 100 10 $2.00

CS-C0P900-120 120 x 120 10 $2.20

CS-C0P900-125 125 x 125 10 $2.80

CS-C0P900-140 140 x 140 10 $3.00

CS-C0P900-150 150 x 150 10 $3.50

CS-C0P900-160 160 x 160 10 $3.90

CS-C0P900-180 180 x 180 10 $4.00

CS-C0P900-200 200 x 200 10 $4.50

CS-C0P900-250 250 x 250 10 $5.10

With Ceramic Center

CS-C0P850-100 100 x 100 10 $2.20

CS-C0P850-120 120 x 120 10 $2.42

CS-C0P850-125 125 x 125 10 $3.08

CS-C0P850-140 140 x 140 10 $3.30

CS-C0P850-150 150 x 150 10 $3.85

CS-C0P850-160 160 x 160 10 $4.29

CS-C0P850-180 180 x 180 10 $4.40

CS-C0P850-200 200 x 200 10 $4.95

CS-C0P850-250 250 x 250 10 $5.61

371.Open Ring Retort Support With Bosshead Made of Ni/Cr plated steel.

Cat no. Ring Dia. Pack Type Price/Each (CAD)

CS-H0320-50 50mm Each $14.00

CS-H0320-60 60mm Each $16.00

CS-H0320-80 80mm Each $18.00

CS-H0320-100 100mm Each $21.00

CS-H0320-120 120mm Each $23.00

CS-H0320-140 140mm Each $26.00



372.Closed Ring Retort Support With Bosshead Made of Ni/Cr plated steel.


CS-H0330-50 50mm Each $16.00

CS-H0330-60 60mm Each $18.00

CS-H0330-80 80mm Each $20.00

CS-H0330-100 100mm Each $23.00

CS-H0330-120 120mm Each $26.00

CS-H0330-140 140mm Each $29.00

373.Circular Support Platforms With BossheadPlastic coated platform with a raised rim. Black or White finish.


CS-H0400-80 80mm Each $35.00

CS-H0400-120 120mm Each $45.00

CS-H0400-150 150mm Each $65.00

375.Medical SpoonStainless steel SUS430. All size.

Cat no. Size (mm) Model Pack Type Price/Each (CAD)

CS-S0S300-125 125 spoon Each $9.00

CS-S0S300-150 150 spoon Each $10.50

CS-S0S300-160 160 spoon Each $12.00

CS-S0S301-160 160 spoon/spoon Each $15.00

CS-S0S300-180 180 spoon Each $16.50

CS-S0S300-200 200 spoon Each $18.30

CS-S0S300-210 210 spoon/spoon Each $21.00

CS-S0S300-230 230 spoon/flat Each $22.20

374.Spoon/FlatStainless steel AISI304.

Cat no. Model Length (mm) Pack Type Price/Each (CAD)

CS-S0P113-210 Flat spoon end spatula. 210 Each $12.00

CS-S0P114-190 Grooved spatula, with angled spoon 190 Each $18.00

CS-S0P115-195 Trulla pattern 195 Each $22.50



376.Spatulas Stainless steel, AISI304. One end rounded and bend up, one end square.

377.Spoon/Grooved Spatulas Stainless steel, spoon/flat pattern.

378.Spoon/Spatulas Stainless steel SUS430, spoon/flat pattern.


CS-S0P110-100 100 Each $13.11

CS-S0P110-120 120 Each $15.60

CS-S0P110-125 125 Each $17.40

CS-S0P110-140 140 Each $18.60

CS-S0P110-150 150 Each $20.70

CS-S0P110-160 160 Each $22.40

CS-S0P110-180 180 Each $24.30

CS-S0P110-200 200 Each $26.40

CS-S0P110-220 220 Each $27.90

CS-S0P110-230 230 Each $29.70


CS-S0P130-120 120 Each $14.00

CS-S0P130-140 140 Each $16.00

CS-S0P130-160 160 Each $18.00

CS-S0P130-180 180 Each $20.00


CS-S0P120-150 150 Each $9.00

CS-S0P120-175 175 Each $11.70

CS-S0P120-200 200 Each $13.50

CS-S0P120-230 230 Each $15.30

379.Spoon/SpatulasStainless steel AISI304, spoon/flat.


CS-S0P125-125 125 Each $18.00

CS-S0P125-150 150 Each $24.00

CS-S0P210-210 210 Each $27.00


380.O-Ring, Viton®

For Solvent and chemical compatibility.

Cat no. Size I.D. W Possible Application Pack Type Price/Each (CAD)

CS-R0007 007 3.7 1.78 0-4mm high vacuum plug tip or 5/5 threaded joint Each $2.15

CS-R0010 010 6.07 1.78 o-4mm high vacuum plug-shaft 7/10 threaded joint Each $2.15

CS-R0013 013 10.8 1.78 Viton® O-ring for 15mm stopper of internal thread Each $3.33

CS-R0121 121 26.6 2.62 Viton® O-ring for 25mm stopper of internal thread Each $10.75

CS-R0212 212 21.8 3.50 Viton® O-ring for 25mm bushing of internal thread Each $6.45

CS-R0014 014 12.3 1.78 14/10 threaded joints- Microscale Each $4.41

CS-R0107 107 5.23 2.62 Thermometer/inlet adapters Each $3.23

CS-R0108 108 6.0 2.62 Top O-ring for 0-8 mm high vacuum valve plug Each $3.23

CS-R0110 110 9.2 2.62 O-ring for 0-8 mm high vacuum valve tip O-ring Each $3.33

CS-R0116 116 18.7 2.62 #15 O-ring joint Each $4.84

CS-R0221 221 21.8 3.50 Replacement #221 O-ring for rodaviss joint Each $6.45

CS-R0223 223 40.9 3.50 Replacement #223 O-ring for rodaviss joint Each $11.83

CS-R0331 331 56.5 5.33 57mm flat O-ring flange Each $21.82

CS-R0217 217 29.7 3.50 Viton® O-ring for #25 O-ring joint Each $10.75



CS-R0339 339 81.9 5.33 80mm flat O-ring flange Each $21.82

CS-R0112 112 12.4 2.62 0-12mm high vacuum valve shaft O-ring Each $2.69

CS-R0008 008 4.5 1.78 O-ring for #7 internal thread Each $2.47

CS-R0225 225 4.72 3.50 O-ring for #50 internal thread Each $13.33



MICROSCOPE COVER GLASS

188

381. Borosilicate 3.3 Glass

For Automatic Coverslipping Machine

Thickness NR.1.0/0.13-0.16mm

Cat no. Dimensions Pack Type Price/Each (CAD)

BS-1316-2222 22 x 22 mm 1 Ounce/Box10 x 1 Ounce/Inner Box $18.30

BS-1316-2432 24 x32 mm 1 Ounce/Box10 x 1 Ounce/Inner Box $21.30












Microscope cover glass made of Borosilicate 3.3 glassPackaging by Weighing.

Special Dimensions are avaialble upon request

Thickness Available:

•Nr. 1.0 - 0.13 - 0.16 mm •Nr. 1.5 - 0.16 - 0.19 mm •Nr. 2.0 - 0.19 - 0.22 mm




SW-1619-2222 22 x 22 mm 1 Ounce/Box10 x 1 Ounce/Inner Box $21.39

SW-1619-2432 24 x32 mm 1 Ounce/Box10 x 1 Ounce/Inner Box $25.90







382.Super White Standard glass


Microscope cover glass made of Super White Standard GlassPackaging by Weighing.

Special Dimensions are avaialble upon request


•Nr. 1.0 - 0.13 - 0.16 mm •Nr. 1.5 - 0.16 - 0.19 mm •Nr. 2.0 - 0.19 - 0.22 mm








383.Microscope Cover Glass, Circular

TLG® Super White Glass (Diamond Line)



C-1316-08 8 ø 100 $30.90

C-1316-10 10 ø 100 $39.90

C-1316-11 11 ø 100 $44.30

C-1316-12 12 ø 100 $49.90

C-1316-13 13 ø 100 $55.90

C-1316-14 14 ø 100 $58.90

C-1316-15 15 ø 100 $61.90

C-1316-16 16 ø 100 $65.90

C-1316-18 18 ø 100 $70.30

C-1316-20 20 ø 100 $75.90

C-1316-22 22 ø 100 $77.90

C-1316-24 24 ø 100 $80.30

C-1316-25 25 ø 100 $81.40

Pack by Counting.

Special Dimensions are avaialble upon request.


•Nr. 1.0 - 0.13 - 0.16 mm •Nr. 1.5 - 0.16 - 0.19 mm •Nr. 2.0 - 0.19 - 0.22 mm



C-1619-08 8 ø 100 $35.90

C-1619-10 10 ø 100 $44.90

C-1619-11 11 ø 100 $49.30

C-1619-12 12 ø 100 $54.90

C-1619-13 13 ø 100 $60.90

C-1619-14 14 ø 100 $63.90

C-1619-15 15 ø 100 $66.90

C-1619-16 16 ø 100 $70.90

C-1619-18 18 ø 100 $75.30

C-1619-20 20 ø 100 $80.90

C-1619-22 22 ø 100 $82.90

C-1619-24 24 ø 100 $85.30

C-1619-25 25 ø 100 $86.40



191



C-1922-08 8 ø 100 $45.90

C-1922-10 10 ø 100 $54.90

C-1922-11 11 ø 100 $59.30

C-1922-12 12 ø 100 $64.90

C-1922-13 13 ø 100 $70.90

C-1922-14 14 ø 100 $73.90

C-1922-15 15 ø 100 $76.90

C-1922-16 16 ø 100 $80.90

C-1922-18 18 ø 100 $85.30

C-1922-20 20 ø 100 $90.90

C-1922-22 22 ø 100 $92.90

C-1922-24 24 ø 100 $95.30

C-1922-25 25 ø 100 $96.40


MICROSCOPE SLIDES

384.TLG® Super White Glass (Diamond Line)

Ground Edges, Corners 90°

Cat no. Marking Area Box of Price/Gross*(CAD)

GEW90-2575-01 Plain 72 $60.90

GEW90-2575-02 20mm depth double frosted one end 72 $75.24



GEW45-2575-01 Plain 72 $64.50

GEW45-2575-02 20mm depth double frosted one end 72 $78.82

Beveled Edges, Corners 45°


BEW45-2575-01 Plain 72 $68.08

BEW45-2575-02 20mm depth double frosted one end 72 $82.40

PRE - CLEANEDDim. 25 x 75mmThickness: 1.0mm

Without tissue paper interleavedIndividual flow-pack20 x 72pcs/inner box2 x 20 x 72pcs/carton

1 Gross = 2 Boxes*


385.TLG® Super White Glass (Diamond Line)

Color Frosted, Adapted For Thermal Transfer Printers

Color Frosted, Ground Edges, Corners 90°


GEW90-2575-W White 72 $74.52

Color Frosted, Ground Edges, Corners 45°


GEW45-2575-B Blue 72 $67.50

GEW45-2575-G Green 72 $67.50

GEW45-2575-P Purple 72 $67.50

GEW45-2575-O Orange 72 $67.50

GEW45-2575-I Pink 72 $67.50

GEW45-2575-T Tan 72 $67.50

GEW45-2575-W White 72 $67.50

GEW45-2575-Y Yellow 72 $67.50

Color Frosted, Beveled Edges, Corners 45°


BEW45-2575-W White 72 $72.00

MICROSCOPE SLIDES


Without tissue paper interleavedIndividual flow-pack20 x 72pcs/carton

I Gross = 2 Boxes*


MICROSCOPE SLIDES



GEW90-2575-03 Plain 72 $60.90

GEW90-2575-04 Single frosted 72 $75.24

GEW90-2575-05 Double frosted 72 $91.00



GEW45-2575-03 Plain 72 $64.50

GEW45-2575-04 Single frosted 72 $78.82

GEW45-2575-05 Double frosted 72 $94.20

Beveled Edges, Corners 45°


BEW45-2575-03 White 72 $68.08

BEW45-2575-04 Single frosted 72 $82.40

BEW45-2575-05 Double frosted 72 $99.00


Individual flow-pack50 x 72pcs/carton

1 Gross = 2 Boxes*


386.TLG® Super Grade, Green Glass

Without Tissue Paper Interleaved

MICROSCOPE SLIDES

195

387.Positive Charged Microscope Slides (Meta-Hydrophobic Surface)

TLG® Super White Glass (Diamond Line)

Suitable For Thermal Transfer Printers, Ground Edges, Corners 90°


GE90-2575-W White 72 $74.76

Suitable For Thermal Transfer Printers, Ground Edges, Corners 45°


GE45-2575-W White 72 $77.44

Suitable For Thermal Transfer Printers, Beveled Edges, Corners 45°


BE45-2575-W White 72 $80.10

The Positive Charged Microscope Slides are made by a new process which offers permanent and more density positive charges on the slide surface to achieve a higher adhesion with the histological or cytological samples. The products can be utilized in more scientific applications, especially for securely attaching frozen breast, brain, skin and other normally difficult to bond tissue sections to the slide.


Without Tissue Interleaved20 x 72pcs/carton

1 Gross = 2 Boxes*


PEPTIDE SYNTHESIS VESSEL

388.Peptide Synthesis Vessel, Solid Phase With a fritted disc of coarse or medium porosity to support resin. Top of the vessel has GL thread and a Teflon® lined screw cap. Teflon® stopcock has a 2mm bore with the arm being 8mm O.D.

389.Peptide Synthesis Vessel, Solid Phase, T-Bore Teflon® Stopcock With a fritted disc of coarse or medium porosity to support resin. Top of the vessel has a GL thread and a Teflon® lined screw cap. Teflon® stopcock has a 2mm bore with the arm being 8mm O.D.


Fritted Disc O.D. (mm) Porosity GL thread

SizePack Type

Price/Each (CAD)

CS-P0120010C 10 15 C 14 Each $121.68

CS-P0120010M 10 15 M 14 Each $121.68

CS-P0120025C 25 20 C 25 Each $138.32

CS-P0120025M 25 20 M 25 Each $138.32

CS-P0120050C 50 25 C 25 Each $154.38

CS-P0120050M 50 25 M 25 Each $154.38

CS-P0120100C 100 40 C 25 Each $217.75

CS-P0120100M 100 40 M 25 Each $217.75

CS-P0120250M 250 50 M 32 Each $238.49



SizePack Type

Price/Each (CAD)

CS-P0130010C 10 15 C 14 Each $154.77

CS-P0130010M 10 15 M 14 Each $154.55

CS-P0130025C 25 20 C 25 Each $170.30

CS-P0130025M 25 20 M 25 Each $170.30

CS-P0130050C 50 25 C 25 Each $186.49

CS-P0130050M 50 25 M 25 Each $186.49

CS-P0130100C 100 40 C 25 Each $202.41

CS-P0130100M 100 40 M 25 Each $202.41

CS-P0130250M 250 50 M 32 Each $259.32


390.Peptide Synthesis Vessel, Solid Phase, T-Bore, VacuumA connection of 8mm O.D. is sealed on the inner joint for connection to an inner gas. With a fritted disc of coarse or medium porosity to support resin. Top of the vessel has GL thread and a Teflon® lined screw cap. Teflon® stopcock has a 2mm bore with the arm being 8mm O.D.

391.Vessel, With Lower Joint And T-Bore PTFE PlugSolid phase peptide synthesis vessels feature 2mm PTFE stopcocks and fritted glass supports for resin beads during operation. The 24/40 inner drip joint can be assembled with other standard glassware. The vessel has a 8mm hose connection for vacuum and the stopcock has an 8mm O.D. sidearm is for inert gas introduction. Vessels are supplied with PTFE-faced silicone lined black Nylon® caps.

PEPTIDE SYNTHESIS VESSEL



SizePack Type

Price/Each (CAD)

CS-P0140010C 10 15 C 14 Each $170.30

CS-P0140010M 10 15 M 14 Each $170.30

CS-P0140025C 25 20 C 25 Each $180.00

CS-P0140025M 25 20 M 25 Each $180.00

CS-P0140050C 50 25 C 25 Each $195.00

CS-P0140050M 50 25 M 25 Each $195.00

CS-P0140100C 100 40 C 25 Each $205.00

CS-P0140100M 100 40 M 25 Each $205.00



SizePack Type

Price/Each (CAD)

CS-P0150025C 25 25 C 25 Each $190.00

CS-P0150025M 25 25 M 25 Each $190.00

CS-P0150050C 50 30 C 25 Each $210.00

CS-P0150050M 50 30 M 25 Each $210.00

CS-P0150100C 100 45 C 25 Each $220.00

CS-P0150100M 100 45 M 25 Each $220.00

CS-P0150250C 250 57 C 32 Each $250.00

CS-P0150250M 250 57 M 32 Each $250.00

CS-P0150500C 500 80 C 32 Each $280.00

CS-P0150500M 500 80 M 32 Each $280.00


PIPETTES

392.Pipette Volumetric, With One Mark, Accuracy As Per Class AReusable, Class A borosilicate glass pipettes meet ASTM requirements. Calibrated to Class A Tolerance in accordance with ASTM E-542, and ASTM E-969. Pipets are calibrated “To Deliver”. All pipettes feature treated and tempered tips to reduce chipping and breakage.


Tolerance (±mL)

Colour Code

Qty/Pk.

Qty/Cs.

Price/Pack (CAD)

123.202.01 1 ±0.0006 Blue 6 12 $96.54

123.202.02 2 ±0.0006 Orange 6 12 $78.74

123.202.03 3 ±0.01 Black 6 12 $78.28

123.202.04 4 ±0.01 Red 6 12 $78.67

123.202.05 5 ±0.01 White 6 12 $76.63

123.202.06 6 ±0.01 Orange 6 12 $84.68

123.202.07 7 ±0.01 Green 6 12 $95.70

123.202.08 8 ±0.02 Blue 6 12 $96.03

123.202.09 9 ±0.02 Black 6 12 $95.96

123.202.10 10 ±0.02 Red 6 12 $86.33

123.202.11 15 ±0.03 Green 6 12 $118.27

123.202.12 20 ±0.03 Yellow 6 12 $128.24

123.202.13 25 ±0.03 Blue 6 12 $136.49

123.202.14 30 ±0.03 Black 6 12 $195.89

123.202.15 40 ±0.05 White 6 12 $193.97

123.202.16 50 ±0.05 Red 3 6 $90.12

123.202.17 100 ±0.08 Yellow 3 6 $127.74

393.Pipette, Serological, Class A, Color-Coded, with Colored Markings, To DeliverThese reusable Serological pipettes are calibrated to Class A Specifications, “To Deliver/Blow out.” Made of borosilicate glass, these pipettes are specially treated to reduce chipping. Accuracy is printed on each pipette. Fast, uniform flow times.


Tolerance (±mL)

Graduation Interval

(mL)

Colour Code Qty/Pk. Qty/

Cs.Price/Pack

(CAD)

124.202.03 1.0 ±0.01 0.1 Red 12 72 $133.72

124.202.04 1.0 ±0.01 0.01 Yellow 12 72 $132.79

124.202.05 2.0 ±0.01 0.1 Green 12 72 $153.52

124.202.06 5.0 ±0.02 0.1 Blue 12 72 $143.62

124.202.07 10.0 ±0.03 0.1 Orange 12 72 $163.94

124.202.08 25.0 ±0.05 0.1 White 12 72 $267.17


PIPETTES

394.Pipette, Measuring (Mohr) Class A, Color-Coded, with Colored Markings, To DeliverThese Reusable Mohr pipettes are calibrated to Class A Specifications & USP Standards for Volumetric Glassware. Pipettes are designed to deliver total capacity without blow-out. Easily identify size by the color-coded graduations enameled into the glass. The top end of 5-25mL sizes is constricted (Mohr type).


Tolerance (±mL)

Graduation Interval

(mL)

Colour Code

Qty/Pk.

Qty/Cs.

Price/Pack (CAD)

125.202.03 1.0 ±0.01 0.1 Red 12 72 $133.72

125.202.04 1.0 ±0.01 0.01 Yellow 12 72 $132.79

125.202.05 2.0 ±0.01 0.1 Green 12 72 $153.52

125.202.06 5.0 ±0.02 0.1 Blue 12 72 $143.62

125.202.07 10.0 ±0.03 0.1 Orange 12 72 $163.94

125.202.08 25.0 ±0.05 0.1 White 12 72 $267.17

395.Disposable Borosilicate Glass Pasteur PipetsBorosilicate glass, without cotton plug, uniform tip size, straight cut tip.

Cat no. Description Qty/Pk Price/Pack (CAD)

123.203.01 Disposable Borosilicate Glass Pasteur Pipette 5-3/4 Inch 1000 $43.97

123.203.02 Disposable Borosilicate Glass Pasteur Pipette 9 Inch 1000 $48.76


PIPETTORS

Cat no. Volume Range[µ]

Increments[µ]

Test volume[µl]

%Inaccuracy

(±)

%Imprecision

(±)

Suitable Tips

Pack Type

Price/Each (CAD)

AV-10001 0.5-10 0.11 2.5 1.5

0-20µl Each $18010 1.0 0.8

AV-10005 5-50 0.55 2.0 2.0

0-200µl Each $18050 0.6 0.6

AV-10011 50-200 150 1.0 0.4

0-200µl Each $180200 0.6 0.15

AV-10055 200-1000 5200 0.9 0.3 100-

1000µl Each $1801000 0.6 0.2

AV-10105 10-100 0.510 3.0 1.5

0-200µl Each $180100 0.8 0.15

AV-10155 100-1000 5100 2.0 0.7 100-

1000µl Each $1801000 0.6 0.2

AV-10201 2-20 0.12 2.0 0.8

0-20µl Each $18020 1.8 0.6

AV-10211 20-200 120 0.6 0.6

0-200µl Each $190200 0.5 0.15

AV-10050 500-5000 50.0500 0.7 0.3 500-

5000µl Each $1901000 0.5 0.15

AV-10150 1000-5000 50.0 1000 0.7 0.3 500-5000µl Each $190


396.Pipettors- Variable VolumeThese Products do not require recalibration after every autoclaving as required by other Autoclavable Pipettes. The click Stop digital system ensures no unwanted volume alterations during pipetting and the two step plunger operation allows reverse pipetting technique useful for working with certain liquids.

397.Pressure Vessel, Heavy wall, Cylindrical VesselHeavy wall cylindrical vessels have an internal thread for use with a 15mm Teflon® bushing as a pressure seal. This unique design allows hand tightening and loosening for easy access into the vessel. The O-ring is positioned on the bushing above the thread for improved sealing. The vessels are useful for pressure reactions and applications such as polymerization and analysis of halogens by thermal decomposition in the presence of lime. Complete apparatus is supplied with vessel, Teflon® bushing and Viton® O-ring.

398.Pressure Vessel, Heavy wall, Round Bottom VesselHeavy wall round bottom vessels have an internal thread for use with a 15mm Teflon® bushing as a pressure seal. This unique design allows hand tightening and loosening for easy access into the vessel. The O-ring is positioned on the bushing above the thread for improved sealing. The vessels are useful for pressure reactions and applications such as polymerization and analysis of halogens by thermal decomposition in the presence of lime. Complete apparatus is supplied with vessel, Teflon® bushing and Viton® O-ring.


O.D. x Overall (mm)

GL Thread Size Supplied Pack

TypePrice/Each

(CAD)CS-P0160001 15 26 x 70 15 complete Each $53.37

CS-P0160002 35 26 x 125 15 complete Each $54.21






O.D. x Overall (mm)

GL Thread Size Supplied Pack

TypePrice/Each

(CAD)CS-P0170001 75 46 x 90 15 complete Each $77.81






PRESSURE VESSEL


SOLVENT STILL

202

399.Solvent Still, Repurification (Grease-Free)Head only. Condenser and flasks are not supplied. Access port has threaded 14/10 joint to accept a Teflon®-lined silicone septum with a compression cap (supplied). Threaded 14/10 also accept regular 14/20 glass or Teflon® stopper (not supplied).

400.Solvent Still HeadSimilar to above but with drip tip on the delivery port other than 14/20 inner joint. With 4mm straight bore stopcock in the upper portion for easy syringe needle access.

401.Solvent Still Head, With Teflon® StopcockSyringe port has 14/20 outer joint for a rubber septum and a 4mm Teflon® stopcock. Solvent is drained through 2mm T-bore Teflon® stopcock. The drainage arm has a 14/20 inner joint.

Cat no. Capacity (mL) Joint Size Pack Type

Price/Each (CAD)

CS-S0134250 250 24/40 Each $298.03

CS-S0134500 500 24/40 Each $415.42

Cat no. Capacity (mL) Top Joints Bottom

Joints Pack Type Price/Each (CAD)

CS-S0234504 500 24/40 24/40 Each $351.13

CS-S0234004 1000 24/40 24/40 Each $364.98

Cat no. Capacity (mL) Top Joints Bottom

Joints Pack Type Price/Each (CAD)

CS-S0244504 500 24/40 24/40 Each $362.41

CS-S0244004 1000 24/40 24/40 Each $376.22


402.Solvent Still, High Vacuum ValvesFor greater solvent/chemical resistance, the two 0-4mm high vacuum valves have Teflon® covers over the two Viton® O-rings on the shaft and one integral Teflon® O-rings on the tip, without exposing any material other than Teflon® to any solvents. Syringe port has a 4mm Teflon® stopcock and a 14/20 outer joint. Delivery port has a 14/20 inner joint.

404.Solvent Still, Built - In CondenserGrease-free design. Same as above with 14/10 threaded joint and Teflon®-lined septum for syringe access.

403.Solvent Still, With High Vacuum ValvesFor greater solvent/chemical resistance, the two 0-4mm high vacuum valves have Teflon® covers over the two Viton® O-rings on the shaft and one integral Teflon® O-rings on the tip, without exposing any material other than Teflon® to any solvents. Syringe port has a 4mm Teflon® stopcock and a 14/20 outer joint. Delivery port has a 14/20 inner joint.


Price/Each (CAD)

CS-S0144125 125 24/40 Each $531.31


Price/Each (CAD)

CS-S0274125 125 24/40 Each $702.90

Cat no. Capacity (mL) Top & Bottom Joints

Pack Type

Price/Each (CAD)

CS-S0264250 250 24/40 Each $597.45

CS-S0264500 500 24/40 Each $648.30

405.Distilling Heat, SolventUpper sampling port has a 4mm Teflon® stopcock with a 14/20 outer joint for use with septa. Lower drain is centered to allow total drainage of storage head.

SOLVENT STILL

Cat no. Take-off Joint

Capacity (mL)

Double Oblique Stopcock Bore (mm)

Pack Type

Price/Each (CAD)

CS-S0251250 14/20 250 2 Each $423.89

CS-S0259250 19/22 250 2 Each $428.89

CS-S0254250 24/40 250 2 Each $426.69

CS-S0251500 14/20 500 2 Each $445.78

CS-S0259500 19/22 500 2 Each $449.99

CS-S0254500 24/40 500 2 Each $453.37

CS-S0254000 24/40 1000 2 Each $475.64

CS-S025242L 24/40 2000 4 Each $510.90


STIRRING RODS


406.Soft Glass Stirring RodsWith rounded and fine-polished ends

Cat no. Dia.mm(inch) Length.mm(inch) Pack Type (pcs/pk)

Price/Pack(CAD)

CS-S0980128 4.84(0.19) 128(4.92) 72 $46.57

CS-S0980153 6.30(0.24) 153(5.88) 72 $61.23

CS-S0980204 6.30(0.24) 204(7.84) 72 $78.90

CS-S0980255 6.30(0.24) 255(9.80) 72 $90.13

407.Stopper, Penny-Head, Glass, HollowAll sizes are with joints. Heavy wall design.

408.Stopper, Penny-Head, Glass, Solid

Cat no. Joint Size Qty/Pack

Qty/Case

Price/Each (CAD)

CS-S0401018 10/18 Each 6 $13.01

CS-S0401420 14/20 Each 6 $12.90

CS-S0401922 19/22 Each 6 $15.52

CS-S0402440 24/40 Each 6 $16.32

CS-S0402942 29/42 Each 6 $20.31

CS-S0403445 34/45 Each 6 $31.13

CS-S0404550 45/50 Each 6 $43.28

CS-S0405550 55/50 Each 6 $53.02


Qty/Case

Price/Each (CAD)

CS-S0291018 10/18 Each 6 $12.54

CS-S0291030 10/30 Each 6 $12.54

CS-S0291420 14/20 Each 6 $12.54

CS-S0291922 19/22 Each 6 $14.44

CS-S0292440 24/40 Each 6 $15.22

CS-S0292942 29/42 Each 6 $22.12

409.Stopper, Cap DesignFor apparatus having an inner opening.

410.Stopper, With #15 O-Ring JointFor use with manifolds having #15 O-ring joints. Supplied complete with one #116 (CS-R116) Viton® O-ring.

STOPPER

Cat no. Joint Size Pack Type

Price/Each (CAD)

CS-S0391420 14/20 Each $14.55

CS-S0391922 19/22 Each $16.23

CS-S0392440 24/40 Each $20.15


Price/Each (CAD)

CS-S0480015 #15 O-ring joint stopper Each $21.00


STOPPER


413.Stopper, Glass, Flask Length, Penny Head

414.Stopper, Plastic, Flask Length


Qty/Case

Price/Each (CAD)

CS-S0280009 #9 Each 6 $5.59

CS-S0280013 #13 Each 6 $5.93

CS-S0280016 #16 Each 6 $7.08

CS-S0280019 #19 Each 6 $8.33

CS-S0280022 #22 Each 6 $9.02

CS-S0280027 #27 Each 6 $11.41

CS-S0280032 #32 Each 6 $15.41

CS-S0280038 #38 Each 6 $20.68

Note All sizes are solid except #32 and #38 which are hollow.


Qty/Case

Price/Each (CAD)

CS-S0120009P #9 Each 6 $3.68

CS-S0120013P #13 Each 6 $3.68

CS-S0120016P #16 Each 6 $4.88

CS-S0120019P #19 Each 6 $4.93

CS-S0120022P #22 Each 6 $6.06

CS-S0120027P #27 Each 6 $6.12

CS-S0120038P #38 Each 6 $7.40

Note All sizes are solid except #32 and #38 which are hollow.

411.Stopper, Spherical, Penny HeadHollow stopper for use with spherical socket joint.

412.Stopper, Teflon®, Flask Length

Cat no. Spherical Size Pack Type

Price/Each (CAD)

CS-S0450035 35 Each $31.73

Cat no. Stopper Pack Type

Price/Each (CAD)

CS-S0120013 13 Each $11.50

CS-S0120016 16 Each $13.10

CS-S0120019 19 Each $14.00

CS-S0120022 22 Each $15.00

CS-S0120027 27 Each $22.90

CS-S0120038 38 Each $45.00

Cat no. Joint Size Pack Type

Price/Each (CAD)

CS-S0111420 14/20 Each $20.00

CS-S0111922 19/22 Each $21.00

CS-S0112425 24/25 Each $22.90

CS-S0112440 24/40 Each $24.00

CS-S0112942 29/42 Each $25.90

CS-S0113445 34/45 Each $27.30

Cat no. Color Joint Size / Tubing ID x OD Fit Pack Type Price/Pack

(CAD)

CS-S7520228 5mm NMR Red 5 mm NMR Tubing - 100 $45.00

CS-S7520229 5mm NMR White

5 mm NMR Tubing - 100 $45.00

CS-S7520200 Red 8-9 mm Tubing 05 x 11 100 $34.80

CS-S7520202 White 8-9 mm Tubing 05 x 11 100 $34.80

CS-S7520220 Red 14/20 Joint 13x20 100 $89.00

CS-S7520221 White 14/20 Joint 13x20 100 $89.00

CS-S7520230 Red 19/22 Joint 15x30 100 $128.00

CS-S7520231 White 19/22 Joint 15x30 100 $128.00

CS-S7520253 Red 24/40 Joint - 100 $170.00

CS-S7520252 White 24/40 Joint - 100 $170.00

CS-S7520254 Red 29/42 Joint - 100 $240.00

CS-S7520255 White 29/42 Joint - 100 $240.00

415.Stopper, Teflon®

Teflon® handle stoppers for easy gripping.

416.Septum Stoppers, Sleeve Type, SeptaFlanged type stoppers with a hollow plug and sleeve extension that folds down over the neck of a vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, re-sealing after needle is withdrawn. Available in either RED or WHITE rubber and sold in the package quantities listed below.

STOPPER


STOPCOCKTEFLON®


417.Stopcock, Teflon® Straight BoreWith 1:5 Teflon® plug and a threaded pressure nut. Stopcock barrels are polished to prevent PTFE plug from scratch.

418.Stopcock, 1:5 Teflon®, T-BoreStopcock with three stems sealed 90° apart. Teflon® plug has a “T” shape bore to connect any two or all three stems.

419.Stopcock, 1:5 Teflon®, Double Oblique BoreWith polished barrels.

420.Stopcock, Teflon®, 120° BoreA 1:5 taper Teflon® stopcock with three sidearms sealed 120° apart. Plug has a bore to allow connection of any two arms at once.

Cat no. Bore (mm) Plug Size Stem O.D. (mm) Pack Type Price/Each

(CAD)CS-S0101502 2 11/25 8 Each $28.00

CS-S0101504 4 15.2/30 10 Each $41.90

CS-S0101506 6 16/35 12 Each $52.50

Cat no. Plug Size Bore (mm) Stem O.D. (mm) Pack Type Price/Each

(CAD)CS-S0161530 15.2/30 2 8 Each $61.90

CS-S0161635 16/35 4 10 Each $74.10


(CAD)CS-S0171244 12.9/44 2 8 Each $59.10

CS-S0171444 14.4/44 4 10 Each $69.10


(CAD)CS-S0411530 15.2/30 2 8 Each $89.43

CS-S0411635 16/35 4 10 Each $103.01

421.Stopcock, Teflon®, Four WayA 1:5 taper Teflon® plug having double “V”, 90° bores to connect opposite sets of adjacent rams. Configuration of stopcock allows it to be used in a system to obtain reversal of flow.


(CAD)CS-S0421530 15.2/30 2 8 Each $133.26

422.Stopcock, Glass, Hollow Plug, Oblique, High VacuumPrecision ground with corresponding numbers on the barrel and plug. Lower vacuum chamber is evacuated via a separate 2mm hole in the plug which is not in the line of flow.

423.Stopcock, Glass, Hollow Plug, Double Oblique, High VacuumPrecision ground with corresponding numbers on the barrel and plug. Lower vacuum chamber is evacuated via a separate 2mm hole in the plug which is not in the line of flow.

424.Stopcock, Glass, Hollow Plug, Offset, High VacuumPrecision ground with corresponding numbers on the barrel and plug. Lower vacuum chamber is evacuated via a separate 2mm hole in the plug which is not in the line of flow.

Cat no. Bore (mm) Plug Size Stem O.D. (mm) Pack Type

Price/Each (CAD)

CS-S0341750 4 17.35/50 10 Each $98.87

CS-S0342565 8 25/65 16 Each $186.43

Cat no. Plug Size (mm)

Bore (mm)

Sidearm O.D (mm) Pack Type Price/Each

(CAD)CS-S0351656 16.2/56 4 10 Each $126.00


Bore (mm)


(CAD)CS-S0701240 12.6/40 2 8 Each $78.20

CS-S0701754 17.35/50 4 10 Each $92.63

CS-S0701756 17.35/50 6 12 Each $112.71

STOPCOCKGLASS


STOPCOCKGLASS

425.Stopcock, Glass, Hollow Plug, 90°, High vacuumPrecision ground with corresponding numbers on the barrel and plug. Lower vacuum chamber is evacuated via a separate 2mm hole in the plug which is not in the line of flow.

426.Stopcock, Glass, Hollow Plug, T-Type, High vacuumPrecision ground with corresponding numbers on the barrel and plug. Lower vacuum chamber is evacuated via a separate 2mm hole in the plug which is not in the line of flow.


Bore (mm)


(CAD)CS-S0711240 12.6/40 2 8 Each $78.20

CS-S0711754 17.35/50 4 10 Each $92.63

CS-S0711756 17.35/50 6 12 Each $118.69


Bore (mm)


(CAD)CS-S0721240 12.6/40 2 8 Each $83.67

CS-S0721754 17.35/50 4 10 Each $97.50

CS-S0721756 17.35/50 6 12 Each $115.90


427.SublimatorA grease-free, two-piece sublimation apparatus consisting of an upper water cooled condenser and lower vessel to hold the material to be sublimed. The sublimate collects on the lower end of the condenser which has a flat bottom. Condenser is constructed using a grease-free, threaded valve. Connection of the condenser and lower vessel via an O-ring joint enables the two parts to be gently separated for maximum product recovery. Complete apparatus consists of the cold finger condenser, lower vessel, Viton® O-ring and stainless steel pinch clamp. Available in two sizes with the capacity listed being that below the bottom of the cold finger.

SUBLIMATOR

Cat no. Description Capacity (mL) Joint Size O-Ring Size Clamp Size Pack Type Price/Each (CAD)

CS-S0732510 10mL sublimer complete 10 25 217 35 Each $259.99



Replacement Components:


CS-S0732510A Lower Vessel only, 10mL sublimer Each $43.69

CS-S0732510B Condenser only, 10mL sublimer Each $230.00





CS-S0600004 0-4mm high vacuum plug and control knob. (Teflon protected O-rings) Each $47.31


SUBLIMATOR


428.Sublimator, With 2mm Glass StopcockSupplied with a special 25mL long-neck flask for small volume efficiency.

Cat no. Stopcock Joints Pack Type Price/Each (CAD)

CS-D0232440G 2mm Glass 24/40 Each $129.86


429.Vacuum Trap, Spherical JointsWith 35/20 spherical joints for added flexibility. Trap body is 50mm O.D. and 360mm in length. Order the three adapters and 35/20 SS pinch clamps separately.

430.Vacuum Trap, 35/20 Ball JointsFor use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately.

431.Vacuum Trap, #15 O-Ring JointSupplied with two CS-R116 Viton® O-rings.

TRAP, VACUUM

Cat no. Joints Description Pack Type Price/Each (CAD)

CS-V0175036 35/20 Vacuum Trap body Each $114.29

CS-V0175037 35/20 Top Adapter(A), 16mm O.D. outlet Each $33.14

CS-V0175038 35/20

Middle Adapter(B)/Pump

Adapter 16mm O.D. outlet

Each $30.11

CS-V0175039 35/20Bottom

Adapter(C), 16mm O.D. outlet

Each $21.16

CS-CS610-35 35/20 Clamps for 35/20 ball joints Each $27.67

Cat no. Joints Outer Body O.D. (mm)

Length Outer Body Below Joint (mm) Pack Type Price/Each

(CAD)CS-V0415045 45/50 50 250 Each $162.13

Cat no. JointOuter

Body O.D. (mm)

Outer Body Length

Below Joint (mm)

O.D. Inner & Side

Tube (mm)

Pack Type

Price/Each (CAD)

CS-V0325045 45/50 50 250 18 Each $124.92

213

A

B

C


TRAP, VACUUM

432.Vacuum Trap, With #15 O-Ring JointTwo-piece design with a 0-12mm high vacuum valve as the shut off. Connection is made via a 57mm O-ring flat flange (supplied, item CS-C0C0057) and a #331 Viton® O-ring (supplied, item #CS-R331). Outer body length below flange is 300mm. Smaller size tubing adapters are also available below. Please order #15 O-ring joint stainless steel clamp (CS-C0C2815) separately.

433.Vacuum Trap, With #15 O-Ring JointFor use with above manifolds with #15 O-ring joint. The seal between upper and lower parts is made with a 57mm flat O-ring flange. Trap body is 57mm O.D. × 300mm in length. Complete trap assembly comes with CS-C0C0057 horseshoe clamp, one CS-R331 Viton® O-ring and two CS-R116 Viton® O-rings.

434.Storage Vessel, #15 O-Ring JointStorage vessel with a #15 O-ring joint on the sidearm and a high vacuum valve to control gas or liquid flow into the vessel. Supplied complete with one #116 Viton® O-ring.

435.NMR Tube WasherWith 24/40 inner joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied through the hose connection.


CS-V0381512 Vacuum trap with #15 O-Ring joint Each $312.34


CS-V0391557 Vacuum trap assembly, complete Each $292.20

Cat no. Capacity (mL) Valve Size Approx. Height (mm)

Pack Type

Price/Each (CAD)

CS-S0490025 25 0-4mm 175 Each $102.45

CS-S0490050 50 0-4mm 190 Each $104.70

CS-S0490100 100 0-8mm 235 Each $140.05

CS-S0490350 350 0-8mm 240 Each $145.00


CS-T0100024 24/40 Each $97.85


436.Storage Flask, #15 O-Ring JointFlask has a #15 O-ring joint on the sidearm and a high vacuum valve to control gas or liquid flow into the vessel. Supplied complete with one #116 Viton® O-ring.

437.Vacuum Trap, Serrated Hose Connections With Joints for easy removal of condensate. Serrated hose connections for side tube have an O.D. of 13mm at the smallest serration and 16mm at the largest serration. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection.

438.Vacuum Trap, Micro, DewarSmall scale dry ice, Dewar style trap. The dry-ice chamber is 40mm I.D × 60mm in length. Choice either glass stopcock for better vacuum or PTFE stopcock for grease-free operation. With 10mm hose connections.

TRAP, VACUUM

Cat no. JointsOuter

Body O.D. (mm)

Outer Body Length

Below Joint (mm)

O.D. Inner & Side

Tube (mm)Pack Type Price/Each

(CAD)

CS-V0163024 24/40 30 200 10 Each $86.02

CS-V0163229 29/42 32 200 10 Each $88.22

CS-V0164034 34/45 40 225 16 Each $108.02

CS-V0164050 40/50 45 250 16 Each $114.02

CS-V0165045 45/50 50 250 22 Each $127.77

CS-V0165050 50/50 55 275 26 Each $149.22

CS-V0165550 55/50 60 300 30 Each $176.39

Cat no. Lower Reservoir (mL)

Stopcock Type

Stopcock Bore (mm) Pack Type Price/Each

(CAD)CS-V0200100G 100 Glass 2 Each $218.85

CS-V0200100 100 Teflon® 2 Each $226.44

Cat no. Capacity (mL) Valve Size Approx.

Height (mm) Pack Type Price/Each (CAD)

CS-S0520050 50 0-4mm 120 Each $104.40

CS-S0520100 100 0-4mm 135 Each $108.50

CS-S0520250 250 0-4mm 160 Each $111.60

CS-S0520500 500 0-8mm 190 Each $115.20

CS-S0521000 1000 0-8mm 220 Each $122.60


TRAP, VACUUM

439.Vacuum Trap, Dewar TypeDry ice, Dewar style trap condenser designed for large volume solvent removal. Choice either glass stopcock for better vacuum or PTFE stopcock for grease-free operation. With 10mm hose connections.

Cat no.Lower

Reservoir (mL)

Stopcock Type

Stopcock Bore (mm)

Inner Chamber

I.D. x Depth (mm)

Pack Type

Price/Each (CAD)

CS-V0210250G 250 Glass 4 59 × 230 Each $358.66

CS-V0210250 250 Teflon® 4 59 × 230 Each $374.44

CS-V0210500G 500 Glass 4 75 × 275 Each $378.46

CS-V0210500 500 Teflon® 4 75 × 275 Each $393.86

CS-V0211000G 1000 Glass 4 95 × 330 Each $397.49

CS-V0211000 1000 Teflon® 4 95 × 330 Each $406.45


440.Tube, Connecting, T-Shape

441.Tube, Connecting, Y-Shape

442.Check ValveAll glass, with ground seat for liquid seal.

TUBE CONNECTING

Cat no. Tubing O.D. (mm) Pack Type Price/Each (CAD)

CS-T0120800 8 Each $14.84

CS-T0121000 10 Each $16.43

Cat no. Tubing O.D. (mm) Pack Type Price/Each (CAD)

CS-T0110800 8 Each $18.60

CS-T0111000 10 Each $20.20

Cat no. Hose Connection (mm) Pack Type Price/Each

(CAD)CS-V0180008 8 Each $44.00


VALVE, HIGH VACUUMPTFE

443.Plug, High Vacuum Valve, PTFE Stem, Viton® O-RingComplete with control knob and PTFE stem having three O-rings.

444.Valve, High Vacuum, PTFE, O-RingWith two 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the precision formed tapered seat.

445.Valve, High Vacuum, PTFE, O-Ring, 180°With two 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring kit, see CS-R7010 or CS-R108110 or CS-R110112.


CS-S0540004 0-4mm high vacuum plug and control knob Viton O-ring at tip Each $31.24




CS-S0550004 0-4mm high vacuum valve, 90°, complete Each $54.74




CS-S0560004 0-4mm high vacuum valve, 180° Each $64.48




446.Valve, High Vacuum, PTFE, O-ring, Low Hold UpWith two 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring kit, see CS-R7010 or CS-R108110 or CS-R110112.

447.Valve, High Vacuum, PTFE, O-Ring, Three WayWith two 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring kit, see CS-R7010 or CS-R108110 or CS-R110112.


CS-S0570004 0-4mm high vacuum valve, (Low Hold Up) Each $62.69

CS-S0570008 0-8mm high vacuum valve, (Low Hold Up) Each $97.39


CS-S0580004 0-4mm high vacuum valve, (3-way) Each $128.74

CS-S0580008 0-8mm high vacuum valve, (3-way) Each $175.75

VALVE, HIGH VACUUMPTFE


448.Valve, High Vacuum,Teflon® Protected, 90°Viton® O-rings on PTFE shaft are protected with precision Teflon® wipers. The plug has a machined-in integral PTFE tip O-ring to make the primary seal. This design provides for an excellent vacuum tight seal without exposing any material other than Teflon® to chemicals. The glass portion has two sidearms sealed to the barrel at a 90 angle to one another.

449.Valve, High Vacuum, Teflon® Protected, 180°With two 9mm O.D. sidearms sealed to the barrel at a 180° angle to one another Viton® O-ring on PTFE shaft are protected with precision Teflon® wipers. The plug has a machined-in Integral PTFE tip O-ring to make the primary seal. This design provides for an excellent vacuum tight seal without exposing any material other than Teflon® to chemicals.

450.Valve, High Vacuum, Teflon® Protected, Low Hold UpWith two 9mm O.D. sidearms bent to minimize hold up of liquids. Viton® O-ring on PTFE shaft are protected with precision Teflon® wipers. The plug has a machined-in Integral PTFE tip O-ring to make the primary seal. This design provides for an excellent vacuum tight seal without exposing any material other than Teflon® to chemicals.














VALVE, HIGH VACUUMTEFLON® PROTECTED

451.Valve, High Vacuum, Teflon® Protected, Three WayViton® O-ring on PTFE shaft are protected with precision Teflon® wipers. The plug has a machined-in Integral PTFE tip O-ring to make the primary seal. This design provides for an excellent vacuum tight seal without exposing any material other than Teflon® to chemicals.

452.Valve, High Vacuum, Teflon® Protected, 90° T- MeteringViton® O-ring on PTFE shaft are protected with precision Teflon® wipers. The plug has a machined-in Integral PTFE tip O-ring to make the primary seal. This design provides for an excellent vacuum tight seal without exposing any material other than Teflon® to chemicals. The glass portion has two sidearms sealed to the barrel at a 90° angle to one another.


CS-S0640004 0-4mm high vacuum valve, (3 - way) Each $140.21




CS-S0670004 0-4mm high vacuum valve, 90° (Teflon® covered O-rings) Each $76.89



VALVE, HIGH VACUUM TEFLON® PROTECTED

221

453.Valve, High Vacuum, Teflon® Protected, Low Hold Up, MeteringViton® O-ring on PTFE shaft are protected with precision Teflon® wipers. The plug has a machined-in Integral PTFE tip O-ring to make the primary seal. This design provides for an excellent vacuum tight seal without exposing any ma-terial other than Teflon® to chemicals. With two 9mm O.D. sidearms bent to minimize hold up of liquids.


CS-S0680004 0-4mm high vacuum valve, Low hold up metering Each $61.38




VIALAS & CLOSURES

222

454.Screw Thread Vials Small Opening & Closures (8-425, ND8)These 8mm Vials and Caps are compatible with Agilent, Waters, Varian and Shimadzu instruments. The vials are made of borosilicate glass. The PTFE silicone septa have a durable seal. We ensure strict quality standards. The Pre-assembled caps with septa are convenient to use (Available upon Request).

455.Screw Thread Vials Wide Opening and Closures (9-425, ND9)These vials can be used on all common auto sampler instruments due to their technical adaptability and dimensions. Our vials are ideally suited for Agilent, Waters, Varian and Shimadzu. Combine the excellent of a crimp cap profile with the ease of a screw cap. The screw cap and precision fit septa give a secure seal with micro volume inserts.

Cat no. Capacity Size (mm) Description Pack Type Price/Pack(CAD)

CS-V08-2 2ML-Vial 12X32Clear Glass, Flat Base, 8-425 Screw

Thread Vials, With Marking spot and graduation.

100PCS/PK $15.00

CS-V08-2A 2ML-Vial 12X32Amber Glass, Flat Base, 8-425 Screw Thread Vial, With Marking spot and

graduation.100PCS/PK $16.50

Cat no. Type Size (mm) Description Pack Type Price/Pack(CAD)

CS-CS08 Cap/Septa 8-425White PTFE/Red Silicone, 1.5mm

(0.06 in) thick septa. Black Open top Screw cap

100PCS/PK $18.09

CS-CS08PCap/

PRE-SLIT Septa

8-425Red PTFE/White Silicone, 1.5mm

(0.06 in) thick , PRE-SLIT septa. Black Open top Screw cap

100PCS/PK $24.81

Cat no. Capacity Size (mm) Description Pack Type Price/Pack

(CAD)

CS-V09-2 2ML 12X32Clear Glass, Flat Base, 9-425

Screw Thread Vials, With Marking spot and graduation.

100PCS/PK $15.4

CS-V09-2A 2ML 12X32Amber Glass, Flat Base, 9-425

Screw Thread Vial, With Marking spot and graduation.

100PCS/PK $17.71

Cat no. Type Size (mm) Description Pack Type Price/Pack

(CAD)

CS-CS09 Cap/Septa 9-425

White PTFE/Red Silicone, 1mm (0.4 in) thick septa with Blue, Open Top (6mm hole) Screw

Ribbed Cap

100PCS/PK $20.90

CS-CS09-PSP Cap/Septa 9-425Red PTFE/White Silicone/Red PTFE, 1mm (0.4) thick septa Blue, Open Top (6mm hole) Screw Ribbed Cap

100PCS/PK $26.95

CS-CS09PCap/

PRE-SLIT Septa

9-425

Red PTFE/White Silicone, 1mm (0.4 in) thick, PRE-SLIT septa Blue,

Open Top (6mm hole) Screw Ribbed Cap

100PCS/PK $30.25


VIALS & CLOSURES


456.Standard Opening Snap Seal Vials and Closures (ND11)These vials can be used on all common auto sampler instruments due to their technical adaptability and dimensions. Our vials are ideally suited for Agilent, Waters, Varian and Shimadzu.

457.Crimp Top Vials Wide Opening and Closures (ND11)These vials and caps are compatible with different auto samplers, like Agilent, Waters, Varian and Shimadzu etc. The vials are made of borosilicate glass. The PTFE silicone septa have a durable seal. All Vials come with marking spot and graduation. Pre-assembled caps and septa are convenient to use. Packing is conducted in a clean environment for optimum quality.


CS-VS011-2 2ML 12X32Clear Glass, Flat Base, 11mm

Snap Vial, Standard Opening, with Marking spot and graduation.

100PCS/PK $13.54

CS-VS011-2A 2ML 12X32

Amber Glass, Flat Base, 11mm Snap Vial, Standard Opening,

With Marking spot and graduation.

100PCS/PK $14.90


CS-SCS11 Cap/Septa 11mm snap11mm Open Top Snap Cap with Red PTFE/White Silicone Septa

1mm (.040") thick.100PCS/PK $18.57

CS-SCS11-PSP Cap/Septa 11mm snap

11mm Open Top Snap Cap with Red PTFE/White Silicone/Red

PTFE 1mm (.040") thick.100PCS/PK $25.69


CS-VC011-2 2ML 12X32Clear Glass, Flat Base, 11mm Crimp

Vial, Standard Opening, with Marking spot and graduation.

100PCS/PK $12.00

CS-VC011-2A 2ML 12X32

Amber Glass, Flat Base, 11mm Crimp Vial, Standard Opening, with Marking

spot and graduation.100PCS/PK $13.30


CS-CPS11 Cap/Septa 11 mm Crimp

SILVER, 11mm Open Top Crimp Cap with CLEAR PTFE/ Red Silicone Septa

1mm (.40") thick.100PCS/PK $21.50

CS-CPS11-PSP Cap/Septa 11 mm

Crimp

SILVER, 11mm Open Top Crimp Cap with Red PTFE/White Silicone/Red PTFE

1mm (.40") thick septa.100PCS/PK $26.50

VIALS & CLOSURES

224

458.Screw Top Headspace Vials (ND 18)Screw top for better sealing and convenience. Built to withstand high internal pressures needed for headspace analysis, these thick wall vials are guaranteed not to burst. Since the caps are the most likely part of the system to leak, these screw caps are made with precision threads for tighter sealing and more reliability. Save time, save operator fatigue and expect great results with these vials.


Round Bottom Headspace Vials

CS-V018-10SR 10ML 22.5x46 10ML Screw headspace clear vials 100PCS/PK $45.90

CS-V018-20SR 20ML 22.5x75.5 20ML Screw headspace clear vials 100PCS/PK $59.90

Flat Bottom Headspace Vials

CS-V018-10SF 10ML 22.5x46 10ML Screw headspace clear vials 100PCS/PK $40.10

CS-V018-20SF 20ML 22.5x75.5 20ML Screw headspace clear vials 100PCS/PK $55.00

Screw Cap and Septa


CS-CS18 Cap/Septa 18

Magnetic precision screw thread metal cap, 8mm

center hole ø17.5mm with Red PTFE/White Silicone

1.5mm (.60”) thick.

100PCS/PK $79.90


VIALS & CLOSURES


459.Crimp Top Headspace Vials (ND 20)These Vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability.


Flat Bottom, Flat Top Headspace Vials

CS-V020-10FF 10ML 22.5x46 Clear glass, 20mm Flat top 100PCS/PK $19.98

CS-V020-20FF 20ML 22.5x75 Clear glass, 20mm Flat top 100PCS/PK $20.90

Flat Bottom, Beveled Top Headspace Vials

CS-V020-10FB 10ML 22.5x46 Clear glass, 20mm Beveled top 100PCS/PK $20.08

CS-V020-20FB 20ML 22.5x75 Clear glass, 20mm Beveled top 100PCS/PK $21.90

Round Bottom, Flat Top Headspace Vials

CS-V020-10RF 10ML 22.5x46 Clear glass, 20mm Flat top 100PCS/PK $20.08

CS-V020-20RF 20ML 22.5x75 Clear glass, 20mm Flat top 100PCS/PK $21.90

Round Bottom, Beveled Top Headspace Vials

CS-V020-10RB 10ML 22.5x46 Clear glass, 20mm Beveled top 100PCS/PK $20.08

CS-V020-20RB 20ML 22.5x75 Clear glass, 20mm Beveled top 100PCS/PK $21.90

Crimp Cap and Septa


CS-CPS20 Cap/Septa 20Open top Aluminum crimp cap with White PTFE/White Silicone

Septa 3mm(.125”)thick.100PCS/PK $57.00

CS-CPS20M Cap/Septa 20Magnetic Silve crimp cap with

White PTFE/White Silicone Septa 3mm(.125”)thick.

100PCS/PK $78.80

WATCH GLASS

226

460.Watch GlassThese watch glasses provide high chemical durability, preventing contamination of solutions. They are modeled to the same radius of curvature for convenient stacking. The heavy wall an uniform fire-polished edge provide mechanical strength. The outside diameter cannot be controlled within close limits and a slight degree of out-of-round can be expected to occur.

Cat no. Dia. Size (mm)

Fits Beaker Size(mL) Qty/Pk Qty/Cs Price/Pack

(CAD)CS-W0998565 65 150 12 144 $32.04

CS-W0998575 75 250 12 72 $33.96

CS-W0998590 90 400 12 72 $77.04

CS-W09985100 100 600 12 144 $40.80

CS-W09985125 125 1000 12 144 $57.60

CS-W09985150 150 2000 12 144 $78.96


IndexAAdapter .................................................................................................................................................................................................... 6

Bubbler, Air Free, Schlenk ................................................................................................................................................................ 26Bushing ................................................................................................................................................................................................. 6Claisen, Dual Entry ........................................................................................................................................................................... 19Claisen, Three-Inlet Type ................................................................................................................................................................. 20Connecting .....................................................................................................................................................................................7, 27Connecting Four Arm ........................................................................................................................................................................ 6Connecting Inlet .................................................................................................................................................................................. 9Connecting, Two Inner Joints............................................................................................................................................................ 8Connecting, Two Outer Joints ........................................................................................................................................................... 8Direct Drip ......................................................................................................................................................................................... 19Distillation, Bent 105 ° ...................................................................................................................................................................... 16Distillation Connecting, Still Head Plain With Thermometer Socket ....................................................................................... 17Distillation Connecting, Vigreux .................................................................................................................................................... 17Distillation Head, Jacketed ............................................................................................................................................................... 17Distillation, Receiving Long Stem ................................................................................................................................................... 16Distillation, Receiving Short Stem .................................................................................................................................................. 16Distillation, With Thermometer Joint ............................................................................................................................................ 18Distillation, With Threaded Thermometer Port............................................................................................................................ 18Distilling, 75° ..................................................................................................................................................................................... 17Distilling, Bent, 105° ......................................................................................................................................................................... 16Drying Tube, 75° ............................................................................................................................................................................... 25Drying Tube, Straight ....................................................................................................................................................................... 25Drying Tube, “U” Shaped ................................................................................................................................................................. 25Enlarging .............................................................................................................................................................................................. 6Flow Control, Metering Stopcock, 90° (Cone Joint) ..................................................................................................................... 22Flow Control, PTFE Stopcock 90°, Inner Joint (Cone Joint) ....................................................................................................... 21Flow Control (Straight), PTFE Stopcock, 90°, Outer Joint (Socket Joint) ................................................................................. 21Flow Control (Straight), PTFE Stopcock, Inner Joint (Cone Joint) ........................................................................................... 21Flushing (Horizontal), Cone Joint .................................................................................................................................................. 23Flushing, Top Socket & Lower Cone Joint ..................................................................................................................................... 23Flushing (Vertical), Cone joint ........................................................................................................................................................ 23Full length, Sealed Tube, Inner Part Only, Interchangeble Joint. ................................................................................................ 13Ground Joint, Reduced Diameter,Extended, Drip Tube .............................................................................................................. 13Inlet 90°, Outer Joint (Socket Joint) ................................................................................................................................................ 12Inlet, 90°, With Cone Joint ............................................................................................................................................................... 11Inlet, Long Stem................................................................................................................................................................................. 11Inlet or Thermometer ....................................................................................................................................................................... 10Inlet, Straight, Hose Connection ..................................................................................................................................................... 13Inlet (Straight), Outer Joint (Socket Joint) ..................................................................................................................................... 12Inlet (Straight), With Cone Joint ..................................................................................................................................................... 11Inlet (Straight), With Frit Disc ........................................................................................................................................................ 12Inlet with Hose Connection ............................................................................................................................................................. 10Inlet With Hose Connection, Straight ............................................................................................................................................ 14Inlet, With Hose & Tube Connections (Cone Joint) .................................................................................................................... 12Kjeldahl Trap ...................................................................................................................................................................................... 19One Socket, Two Cone, Connecting ................................................................................................................................................. 9Pour Out ............................................................................................................................................................................................. 19Receiver Adapters, Straight .............................................................................................................................................................. 18Recovery Bend, 75° ........................................................................................................................................................................... 18Reducing ............................................................................................................................................................................................... 6Steam Distillation Heads .................................................................................................................................................................. 20Thermometer (Cone Joint) .............................................................................................................................................................. 10Thermometer, Inlet, With Rubber Fitting ...................................................................................................................................... 10Transfer Valve, Airfree, Schlenk ...................................................................................................................................................... 27Twin Connecting Hose ..................................................................................................................................................................... 11Two Socket, One Cone, Connecting ................................................................................................................................................. 9

U-Shape .................................................................................................................................................................................................9Vacuum ............................................................................................................................................................................................... 23Vacuum Distilling ............................................................................................................................................................................. 15Vacuum Filtration ............................................................................................................................................................................. 14Vacuum/Gas, Ball Joint ..................................................................................................................................................................... 15Vacuum Take-off, Long Stem, 105° ................................................................................................................................................. 14Vacuum Take-off, Short Stem, Bend ............................................................................................................................................... 14Vacuum Transfer ............................................................................................................................................................................... 24With Mineral Oil Bubbler ................................................................................................................................................................ 26With Spherical (Ball) Joint ..................................................................................................................................................................7With Spherical Socket ..........................................................................................................................................................................7

Arsine Generator .................................................................................................................................................................................. 28Arsenic Limit Test - As Per Japanese Pharmacopeia .................................................................................................................... 29European Pharmacopeia .................................................................................................................................................................. 28USP Type ............................................................................................................................................................................................ 28USP Type (Improved Version)......................................................................................................................................................... 28

BBeakers ................................................................................................................................................................................................... 30

Heavy Duty, Graduated Beaker ....................................................................................................................................................... 30Standard Wall, Griffin Low Form, Double Scale, Graduated ...................................................................................................... 31

Bottles .................................................................................................................................................................................................... 32BOD Bottle ......................................................................................................................................................................................... 34Bottle, Gas Washing, Fritted ............................................................................................................................................................ 35Bottle, Gas Washing, Fritted Disc ................................................................................................................................................... 36Bottles Reagent, Narrow Mouth, Amber Glass ............................................................................................................................ 33Bottles Reagent, Narrow Mouth, Clear Glass ................................................................................................................................ 32Dropping Bottles, Amber Glass ....................................................................................................................................................... 34Dropping Bottles, Clear Glass.......................................................................................................................................................... 34Glass Media/Storage Bottles, Amber .............................................................................................................................................. 33Glass Media/Storage Bottles, Clear ................................................................................................................................................. 33Pycnometers Gay - Lussac, Calibrated ........................................................................................................................................... 35Weighing Bottles, Low Form, Short Length Joint ......................................................................................................................... 32Weighing Bottles, Tall Form, Short Length Joint .......................................................................................................................... 32

Burettes .................................................................................................................................................................................................. 37Automatic Self Zeroing Burette With PTFE Key .......................................................................................................................... 37Burette With Straight Bore PTFE Key Stopcock ........................................................................................................................... 37Straight Bore PTFE Stopcock Burets, Funnel Filled - Educational Grade, Class A tolerance ................................................ 37

CChromatography .................................................................................................................................................................................. 38

Chromatography Column ................................................................................................................................................................ 44Chromatography Column, Fritted Disc, Spherical Joints ............................................................................................................ 49Chromatography, Column, Fritted Disc, Teflon® Stopcock ......................................................................................................... 43Chromatography Column, Modified .............................................................................................................................................. 39Chromatography, Column Plain, Teflon® Stopcock ...................................................................................................................... 42Chromatography, Column, Rodaviss Joints, Teflon® Stopcock ................................................................................................... 52Chromatography, Column, Rodaviss Joints, Teflon® Stopcock, Fritted Disc ............................................................................ 53Chromatography Column, Spherical Joints ................................................................................................................................... 48Chromatography Column, With a Coarse Porosity ..................................................................................................................... 45Chromatography, Column, With Reservoir ............................................................................................................................ 46, 50Chromatography, Column, With Reservoir, Fritted Disc ...................................................................................................... 47, 51Chromatography Column, With Top Outer Joint ........................................................................................................................ 40Chromatography Flow Control Adapter ........................................................................................................................................ 38Chromatography Reservoir .............................................................................................................................................................. 38Chromatography, Rodaviss Joint, Flow Control Adapter ............................................................................................................ 40Disposable Cleanup/Drying Chromatography Columns ............................................................................................................ 41Funnel, Solvent Addition ................................................................................................................................................................. 39Rodaviss Joints, Reservoir ................................................................................................................................................................ 41Sprayer, TLC Chromatography........................................................................................................................................................ 41

Cold Test ................................................................................................................................................................................................ 54Cold Test (Cloud and Pour Points) Jars ......................................................................................................................................... 54

Column Distillation ............................................................................................................................................................................. 56Column, Distilling, Vigreaux ........................................................................................................................................................... 56Condenser, Distilling, vacuum Jacketed......................................................................................................................................... 56Distillation .......................................................................................................................................................................................... 56

Column Packing Material ................................................................................................................................................................... 55Beads, Solid Glass .............................................................................................................................................................................. 55Glass Helices ...................................................................................................................................................................................... 55

Condenser ............................................................................................................................................................................................. 57Allihn .................................................................................................................................................................................................. 62Allihn, Removable Hose Connections ........................................................................................................................................... 62Coiled .................................................................................................................................................................................................. 58Coiled, Removable Hose Connection ............................................................................................................................................. 58Cold Finger, With Drip Tip.............................................................................................................................................................. 57Condenser West ................................................................................................................................................................................. 59Condenser West, Removable Hose Connections .......................................................................................................................... 60Dewar, Micro, 105° ............................................................................................................................................................................ 63Dewar, Micro, 180° ........................................................................................................................................................................... 63Graham ............................................................................................................................................................................................... 59Graham, Removable Hose Connections ........................................................................................................................................ 59Internal Coil, Jacketed ...................................................................................................................................................................... 61Liebig ................................................................................................................................................................................................... 62Liebig, Removable Hose Connections ............................................................................................................................................ 63Reflux .................................................................................................................................................................................................. 57Reflux, Bent 105° ............................................................................................................................................................................... 61Reflux, Bent 105° , Removable Hose Connections ....................................................................................................................... 61Reflux, Large Cooling Capacity ....................................................................................................................................................... 60Reflux, Large Cooling Capacity, Removable Hose Connections ................................................................................................ 60Reflux, Removable Hose Connections ........................................................................................................................................... 58

Crucible ................................................................................................................................................................................................. 64Crucible, Gooch Type, With Sintered Disc .................................................................................................................................... 68High-Form Porcelain Crucibles ...................................................................................................................................................... 64Low(Wide)-Form Porcelain Crucibles ........................................................................................................................................... 65Porcelain Crucible Covers ..........................................................................................................................................................64, 65Quartz Crucibles With Lids ............................................................................................................................................................. 67Quartz Crucibles Without Lids ....................................................................................................................................................... 67Silica Basins ........................................................................................................................................................................................ 66Silica Crucible With Lid ................................................................................................................................................................... 66Silica Crucible Without Lid ............................................................................................................................................................. 66

Cylinders ................................................................................................................................................................................................ 69Cylinders, To Contain (TC) Class A, White Scale, Mixing, Single Metric Scale ...................................................................... 74Cylinders, To Contain (TC) Class A, White Scale,With Double Metric Graduations, Bumper ............................................. 71Cylinders, To Contain (TC) Class A, White Scale, With Single Metric Graduations, Bumper .............................................. 73Cylinders, To Deliver, Single Metric Scale, With Bumper Guard, Plastic Hexagonal Base ..................................................... 69Cylinders, To Deliver (TD) Class A, White Scale, With Double Metric Graduations, Bumper ............................................. 70Cylinders, To Deliver (TD) Class A, White Scale, With Single Metric Graduations, Bumper ............................................... 72Nessler Cylinder ................................................................................................................................................................................ 69Tap Density Cylinder ........................................................................................................................................................................ 69

DDish Distillation ................................................................................................................................................................................... 75

Dessicator With Lid, Plain ............................................................................................................................................................... 75Dessicator With Lid, With Vacuum ................................................................................................................................................ 76Dishes, Crystallizing, Without Spout ............................................................................................................................................. 76Distilling Bulb, Kugelrohr ................................................................................................................................................................ 75Weighing Funnel ............................................................................................................................................................................... 75

Distillation Apparatus .......................................................................................................................................................................... 82Alcohol Determination - Distillation Apparatus <611> .............................................................................................................. 82Components for Midi-Ammonia Distillation Apparatus (Midi VAP 3000) ............................................................................ 85Components for Midi-Cyanide Distillation Apparatus (Midi VAP 3000) ............................................................................... 85Components for Midi-Phenol Distillation Apparatus (Midi VAP 3000)................................................................................ 86Cyanide Distillation Apparatus with Two Bubbler 19/38 Joint ................................................................................................... 84Desiccant Flask .................................................................................................................................................................................. 82

Drying Chamber, Abderhalden ....................................................................................................................................................... 82Essential Oil Determination Apparatus (Clevenger Type) .......................................................................................................... 82Hydroxypropoxy Determination Apparatus.................................................................................................................................. 83Monier-Williams Sulfites Distillation Apparatus (Sulpher Dioxide Test Appratus) ................................................................ 86Nitrogen Determination (Kjeldahl) Assembly .............................................................................................................................. 87Regular Sulphite/Cyanide Distillation Apparatus TLG® .............................................................................................................. 83

Distillation Head .................................................................................................................................................................................. 80Jacketed, Vigreux, Micro .................................................................................................................................................................. 80Micro scale ......................................................................................................................................................................................... 81Vigreux, Jacketed ............................................................................................................................................................................... 80Vigreux, Micro ................................................................................................................................................................................... 80

Distillation Receiver ............................................................................................................................................................................. 77Distillation Cow Receiver ................................................................................................................................................................. 77Distillation Receiver, Dean Stark With Uptake Tube Vacuum (Clevenger Apparatus) ........................................................... 79Distillation Receiver/Moisture Determination Apparatus, Dean & Stark ................................................................................. 79Distillation Receiving Set, With Rotating cow .............................................................................................................................. 78Distilling, Cow Receiver Graduated ............................................................................................................................................... 77Distilling Receiver, Graduated, With Hooks ................................................................................................................................. 77Distilling Receiver, With Hose Connection ................................................................................................................................... 78Distribution Receiver, Vertical Orientation ................................................................................................................................... 79

EEvaporation Apparatus ........................................................................................................................................................................ 88

Adapter, Distillation Trap ................................................................................................................................................................. 88Rotary, Evaporator, Bump Trap Anti Climb .................................................................................................................................. 88Rotary, Evaporator, Bump Trap, Anti-Splash ................................................................................................................................ 89Rotary, Evaporator, Bump Trap Anti-Splash, Modified ............................................................................................................... 90Rotary, Evaporator, Bump Trap, Anti-Splash With Fritted Disc ................................................................................................. 89

Extractor Soxhlet .................................................................................................................................................................................. 91Condenser, For Soxhlet Extractors ................................................................................................................................................. 91Extractor, Liquid-Liquid, Continuous ............................................................................................................................................ 91Extractor, Soxhlet .............................................................................................................................................................................. 91

FFilter products ....................................................................................................................................................................................... 98

Nylon 66 Membrane Filter ............................................................................................................................................................. 105PTFE (Hydrophobic) Membrane Filter ........................................................................................................................................ 105PVDF (Hydrophilic) Membrane Filter ......................................................................................................................................... 106Syringe Filter, Mixed Cellulose Ester, MCE (Hydrophilic) ........................................................................................................ 103Syringe Filter, Polyamide(PA), Nylon66(Hydrophilic) .............................................................................................................. 102Syringe Filter, Polyethersulfone, PES (Hydrophilic) ................................................................................................................... 104Syringe Filter, Polypropylene, PP (Hydrophobic) ....................................................................................................................... 104Syringe Filter, Polytetrafluorethylene, PTFE (Hyrdrophobic) ................................................................................................... 102Syringe Filter, Polyvinylidenefluoride ,PVDF (Hydrophilic) .................................................................................................... 103

Filtration Apparatus ............................................................................................................................................................................. 92Microfiltration Apparatus, 47 mm All-Glass, with Fritted Glass Support Base ........................................................................ 92Microfiltration Assembly, 25 mm, with Fritted Glass Support ................................................................................................... 96Microfiltration Assembly, 25 mm, with Stainless Steel Support ................................................................................................. 97Microfiltration Assembly, 47 mm, with Glass Support, with Silicone stopper ......................................................................... 93Microfiltration Assembly, 47 mm, with PTFE-Faced Fritted Glass Support ............................................................................. 94Microfiltration Assembly, 47 mm, with Stainless Steel Support ................................................................................................. 95

Flask DistillationFlask, Distillation, ASTM E-1405.................................................................................................................................................. 123

Flask-Erlenmeyer-Stopper Top & Screw Top ................................................................................................................................. 129Erlenmeyer Flask, Narrow Neck With Graduation .................................................................................................................... 115Erlenmeyer Flask, Wide Neck With Graduation ........................................................................................................................ 115Flask Erlenmeyer, GL Threads ....................................................................................................................................................... 116Flask, Erlenmeyer, Outer Joint ...................................................................................................................................................... 116

Flask-Filtering/VacuumFlask, Buckner, Filtration Bolt Neck ............................................................................................................................................. 122Flask, Filtering Heavy Wall ............................................................................................................................................................ 122

Flask Flat Bottom ................................................................................................................................................................................ 114

Flask, Flat Bottom............................................................................................................................................................................114Flask, Flat Bottom, Amber .............................................................................................................................................................114Flask, Flat Bottom, Boiling, Long Neck ........................................................................................................................................114

Flask Iodine .........................................................................................................................................................................................117Flask Kjeldahl

Flask, Kjeldahl, Long Neck With Standard Taper Joint ..............................................................................................................120Flask Pear Shape .................................................................................................................................................................................118

Flask, Pear Shape, Single Neck .......................................................................................................................................................118Flask, Pear Shape, Threaded Inlet .................................................................................................................................................118Flask, Two Neck, Pear Shape ..........................................................................................................................................................119

Flask Recovery ....................................................................................................................................................................................121Flask Round Bottom ..........................................................................................................................................................................107

Flask, Round Bottom, 3-Neck Bottom Outlet .............................................................................................................................112Flask, Round Bottom, 4-Neck, Angled .........................................................................................................................................112Flask, Round Bottom 4-Neck,Vertical ..........................................................................................................................................113Flask, Round Bottom, Boiling, Long Neck ..................................................................................................................................113Flask, Round Bottom, Single Neck ...............................................................................................................................................107Flask, Round Bottom, Spherical Joint ...........................................................................................................................................107Flask, Round Bottom, Threaded Inlet ..........................................................................................................................................108Flask, Round Bottom with Hooks .................................................................................................................................................108Flask, Three Neck, Angled..............................................................................................................................................................110Flask, Three Neck, Vertical .............................................................................................................................................................111Flask, Two Neck, Angled ................................................................................................................................................................109

Flask Schlenk Tube .............................................................................................................................................................................124Flask, High vacuum Valve ..............................................................................................................................................................127Flask, Modified Schlenk Tube ........................................................................................................................................................128Flask, Reaction, High vacuum Valve ............................................................................................................................................127Flask, Reaction Tube, High vacuum Valve ...................................................................................................................................124Flask, Reaction Tube, Male Joint ...................................................................................................................................................125Flask, Reaction Tube, With Glass Stopcock .................................................................................................................................125Flask, Reaction Tube, With Inner (Male) Joint ...........................................................................................................................126Flask, Reaction Tube, With Outer Joint .......................................................................................................................................126Flask, Solvent Transfer/Storage, Straus, Airfree Schlenk ...........................................................................................................130Flask, Storage With Outer Joint .....................................................................................................................................................130Tube, Storage, High vacuum Valve ...............................................................................................................................................124Tube, Storage With Outer Joint .....................................................................................................................................................129

Flask Volumetric .................................................................................................................................................................................131Flask, Micro Volumetric, Class A ..................................................................................................................................................131Volumetric Flask, Polypropylene...................................................................................................................................................133Volumetric Flask With One Graduation Mark Class A,Narrow Mouth ..................................................................................131Volumetric Flask With One Graduation Mark Class A, Wide Mouth, Amber .......................................................................133Volumetric Flask With One Graduation Mark Class A, Wide Mouth, Heavy Duty ..............................................................132

Funnel Buchner ..................................................................................................................................................................................144Buchner Funnel, Porcelain .............................................................................................................................................................144Filter Funnel, Buchner ....................................................................................................................................................................147Filter Funnel, Buchner, Inner Joint ...............................................................................................................................................146Filter Funnel, Buchner, Inner Joint, Perforated Plate .................................................................................................................145Filter Funnel, Buchner, Perforated Plate ......................................................................................................................................145Funnel, Filter, Buchner, Jacketed ...................................................................................................................................................144

Funnel Filter ........................................................................................................................................................................................138Filter Funnel, Hirsch .......................................................................................................................................................................138Funnel Filtering, 60° angle with stem ...........................................................................................................................................137Funnel, Micro ..................................................................................................................................................................................137Funnel, Solvent Addition ...............................................................................................................................................................137

Funnel-Filter/Filtration Tube ............................................................................................................................................................135Filter Tube, Fritted Disc ..................................................................................................................................................................135Filter Tube, Fritted Disc, With 2mm Glass Stopcock .................................................................................................................135Funnel, Addition, High vacuum Valve .........................................................................................................................................135Funnel, Filter, Fritted Disc .............................................................................................................................................................134Funnel, Filter, Fritted Disc, High Vacuum ...................................................................................................................................134Funnel, Filter, Fritted Disc, High Vacuum, Cone Joint ..............................................................................................................134

Funnel Powder .................................................................................................................................................................................... 136Funnel, Plain, Filling, Powder ........................................................................................................................................................ 136Funnel, Powder ................................................................................................................................................................................ 136Funnel, Powder 60° Offset .............................................................................................................................................................. 136Funnel, Powder, Flattened Side ..................................................................................................................................................... 136

Funnel Pressure Equalizing ............................................................................................................................................................... 139Funnel, Pressure Equalizing ........................................................................................................................................................... 139Funnel, Pressure Equalizing, High vacuum Valve ...................................................................................................................... 140Funnel, Pressure Equalizing, Teflon® Stopcock ........................................................................................................................... 140

Funnel Separatory .............................................................................................................................................................................. 143Cylindrical Funnel, Separatory, Graduated ................................................................................................................................. 143Funnel separatory ............................................................................................................................................................................ 142Funnel Separatory, Amber ............................................................................................................................................................. 141Funnel, Separatory Sure-Grip ........................................................................................................................................................ 142Funnel, Separatory, Teflon® Stopcock ........................................................................................................................................... 141Funnel, Separatory, Teflon® Stopcock, Cylindrical Shaped ........................................................................................................ 143

GGas Dispersion Tube .......................................................................................................................................................................... 148

Gas Dispersion Tube, Fritted ......................................................................................................................................................... 148Gas Dispersion Tube, Fritted, 15° Angle ...................................................................................................................................... 148

MManifold Accessories

Adapter, #15 O-Ring Joint To Inner Joint .................................................................................................................................... 171Adapter, #15 O-Ring Joint To Serrated Hose Connection ......................................................................................................... 171Manifold, Solvent Transfer ............................................................................................................................................................. 171

Manifold Double ................................................................................................................................................................................ 168Manifold, Double, High Vacuum Valve and 35/20 Spherical Joint .......................................................................................... 169Manifold, Double, Hollow Glass Stopcocks, Left Hand Side ..................................................................................................... 169Manifold, Double, Hollow Glass Stopcocks, Right Hand Side .................................................................................................. 168Manifold, Double, Hollow Glass Stopcocks, Spherical Joints ................................................................................................... 168

Manifold High Vacuum Solid Glass Stopcock................................................................................................................................ 157Manifold, High Vacuum Solid Glass Stopcock, Front-Left-Right & Rear-Left-Right ............................................................ 157Manifold, High Vacuum Solid Glass Stopcocks, Front-Left & Rear-Right .............................................................................. 157Manifold, High Vacuum Solid Glass Stopcocks, Front-Left-Right & Rear-Left ..................................................................... 158Manifold, High Vacuum Solid Glass Stopcocks, Front-Left-Right & Rear-Right .................................................................. 159Manifold, High Vacuum Solid Glass Stopcocks, Front-Right & Rear-Left .............................................................................. 158Manifold, High Vacuum Solid Glass Stopcocks, Front-Right & Rear-Left-Right .................................................................. 160

Manifold High Vacuum Valves ......................................................................................................................................................... 163Vacuum Manifold, High Vacuum Valves, Hose Connection At Both Ends ............................................................................ 164Vacuum Manifold, High Vacuum Valves, Hose Connection At Left Side ............................................................................... 163Vacuum Manifold, High Vacuum Valves, Hose Connection At Right side ............................................................................ 163

Manifold Nitrogen/Argon Line,Teflon ............................................................................................................................................ 165Manifold, Nitrogen/Argon Line, Teflon, Both Ends Hose Connections ................................................................................. 165Manifold, Nitrogen/Argon Line, Teflon, Left Hose Connection .............................................................................................. 165Manifold, Nitrogen/Argon Line, Teflon, Right Hose Connection ............................................................................................ 166

Manifold Vacuum/Inert Gas, All Glass ........................................................................................................................................... 153Manifold, Vacuum/Inert Gas, All Glass, Front-Left & Rear-Left-Right................................................................................... 155Manifold, Vacuum/Inert Gas, All Glass, Front-Left & Rear-Right ........................................................................................... 153Manifold, Vacuum/Inert Gas, All Glass, Front-Left-Right & Rear-Left................................................................................... 154Manifold, Vacuum/Inert Gas, All Glass, Front-Left-Right & Rear-Left-Right ....................................................................... 153Manifold, Vacuum/Inert Gas, All Glass, Front-Left-Right & Rear-Right ................................................................................ 155Manifold, Vacuum/Inert Gas, All Glass, Front-Right & Rear-Left ........................................................................................... 154Manifold, Vacuum/Inert Gas, All Glass, Front-Right & Rear-Left-Right ................................................................................ 156

Manifold Vacuum/Inert Gas,Double ............................................................................................................................................... 150Manifold, Vacuum/Inert Gas, Double .......................................................................................................................................... 150Manifold, Vacuum/Inert Gas, Double, With Front-Left & Rear-Right .................................................................................... 150Manifold, Vacuum/Inert Gas, Double, With Front-Left-Right & Rear-Right ......................................................................... 152Manifold, Vacuum/Inert Gas, Double, With Front-Right & Rear-Left .................................................................................... 151

Manifold Vacuum, Single Body ........................................................................................................................................................ 167

Manifold, Vacuum, Single Body, Left Hand ................................................................................................................................167Manifold, Vacuum, Single Body, Right Hand ..............................................................................................................................167

Manifold Vacuum,Teflon Stopcock ..................................................................................................................................................161Vacuum Manifold, Teflon Stopcocks, Hose Connection At Both Ends ...................................................................................162Vacuum Manifold, Teflon Stopcocks, Hose Connection At Left End ......................................................................................161Vacuum Manifold, Teflon Stopcocks, Hose Connection At Right Side ...................................................................................161

Manifold With #15-O Rings .............................................................................................................................................................170Manifold, Double Banks, With # 15 O-Ring Joints ....................................................................................................................170Manifold, Vacuum, Single, With # 15 O-Ring Joints ..................................................................................................................170Manifold, With # 15 O-Ring Joints ...............................................................................................................................................170

Metal & Plastic Accessories ...............................................................................................................................................................172Alloy Test Tube & Thermometer Holder ......................................................................................................................................174Beaker Tong .....................................................................................................................................................................................177Breaker Tong ....................................................................................................................................................................................176Bross Head, Black Plated Finish ....................................................................................................................................................173Circular Support Platforms With Bosshead ................................................................................................................................185Closed Ring Retort Support With Bosshead ...............................................................................................................................185Conical Head Clips (s/s) .................................................................................................................................................................178Conical Head Keck Clips ................................................................................................................................................................178Crucible Tongs, Stainless Steel .......................................................................................................................................................176Dish Forcep ......................................................................................................................................................................................175Draining Rack ..................................................................................................................................................................................181Electrode Stand With Swivel Arm ................................................................................................................................................181Extension Clamp .............................................................................................................................................................................174Flexible Clamp With Rotable Bosshead .......................................................................................................................................174Flexible Shank Three Finger Clamp ..............................................................................................................................................172Forceps ..............................................................................................................................................................................................178Hoffman’s Tubing Clip ....................................................................................................................................................................175Horizon Pipette Rack ......................................................................................................................................................................181Laboratory Forceps .........................................................................................................................................................................179Laboratory Jacks ..............................................................................................................................................................................182Medical Spoon .................................................................................................................................................................................185Metal Standard Taper Clips ............................................................................................................................................................177Mohr’s Tubing Clip (spring steel) ..................................................................................................................................................175Nessler Tube Rack ...........................................................................................................................................................................181Open Ring Retort Support .............................................................................................................................................................183Open Ring Retort Support With Bosshead ..................................................................................................................................184O-Ring, Viton® .................................................................................................................................................................................187Rectangular Retort Stand Base ......................................................................................................................................................183Retort Stand Base with Metal Sheet base (Stainless Steel) .........................................................................................................182Spatulas .............................................................................................................................................................................................186Spherical Joint Pinch Clamps ........................................................................................................................................................177Spoon/Flat ........................................................................................................................................................................................185Spoon/Grooved Spatulas ................................................................................................................................................................186Spoon/Spatulas ................................................................................................................................................................................186Spring Tubing Clamps ....................................................................................................................................................................175Suspension Clamp ...........................................................................................................................................................................173Swivel Clamp ....................................................................................................................................................................................174Teasing Needle .................................................................................................................................................................................177Test Tube Rack (Plastic) .................................................................................................................................................................180Test Tube Racks (Plastic) ................................................................................................................................................................180Test Tube & Thermometer Swivel Holder (Alloy) ......................................................................................................................174Thermometer Extension Clamp ....................................................................................................................................................173Thermometer Swivel Clamp ..........................................................................................................................................................173Three Finger Clamps .......................................................................................................................................................................172Three Finger Double Adjust Clamp ..............................................................................................................................................172Three Finger Double Adjust Swivel Clamp (large) .....................................................................................................................173Tripod Retort Stand Bases ..............................................................................................................................................................183Tripods, Circular top(Stainless Steel) ...........................................................................................................................................183Tripods, Triangular top(Stainless Steel) .......................................................................................................................................182Two Prong Extension Clamps (Medium) ....................................................................................................................................172

Wire Gauze Squares ........................................................................................................................................................................ 184Microscope Cover Glass .................................................................................................................................................................... 188

Microscope Cover Glass, Circular TLG® Super White Glass (Diamond Line) ....................................................................... 190Super White Standard glass ........................................................................................................................................................... 189

Microscope Slides ............................................................................................................................................................................... 192Positive Charged Microscope Slides (Meta-Hydrophobic Surface)TLG Super White Glass (Diamond Line) .................. 195TLG® Super Grade, Green Glass Without Tissue Paper Interleaved ........................................................................................ 194TLG® Super White Glass (Diamond Line) Color Frosted, Adapted For Thermal Transfer Printers.................................... 193

PPeptide Synhesis Vessel ...................................................................................................................................................................... 196

Peptide Synthesis Vessel, Solid Phase ........................................................................................................................................... 196Peptide Synthesis Vessel, Solid Phase, T-Bore Teflon® Stopcock .............................................................................................. 196Peptide Synthesis Vessel, Solid Phase, T-Bore, vacuum ............................................................................................................. 197Vessel, With Lower Joint And T-Bore PTFE Plug ....................................................................................................................... 197

Pipettes ................................................................................................................................................................................................. 198Disposable Borosilicate Glass Pasteur Pipets ............................................................................................................................... 199Pipette, Measuring (Mohr) Class A, Color-Coded, with Colored Markings, To Deliver ................................................... 199Pipette, Serological,Class A, Color-Coded, with Colored Markings, To Deliver ................................................................... 198Pipette Volumetric, With One Mark, Accuracy As Per Class A .............................................................................................. 198

Pipettors ............................................................................................................................................................................................... 200Pipettors- Variable Volume ............................................................................................................................................................ 200

Pressure Vessel .................................................................................................................................................................................... 201Pressure Vessel, Heavy wall, Cylindrical Vessel .......................................................................................................................... 201Pressure Vessel, Heavy wall, Round Bottom Vessel .................................................................................................................... 201

Pycnometers Gay - Lussac, Calibrated .............................................................................................................................................. 35

SSolvent Still .......................................................................................................................................................................................... 202

Distilling Heat, Solvent ................................................................................................................................................................... 203Solvent Still, Built - In Condenser ................................................................................................................................................. 203Solvent Still Head ............................................................................................................................................................................ 202Solvent Still Head, With Teflon® Stopcock ................................................................................................................................... 202Solvent Still, High vacuum Valves ................................................................................................................................................. 203Solvent Still, Repurification (Grease-Free) .................................................................................................................................. 202Solvent Still, With High Vacuum Valves ...................................................................................................................................... 203

Stirring rods ........................................................................................................................................................................................ 204Soft Glass Stirring Rods .................................................................................................................................................................. 204

Stopcock Glass .................................................................................................................................................................................... 209Stopcock, Glass, Hollow Plug, 90°, High vacuum ....................................................................................................................... 210Stopcock, Glass, Hollow Plug, Double Oblique,High vacuum ................................................................................................. 209Stopcock, Glass, Hollow Plug, Oblique, High vacuum .............................................................................................................. 209Stopcock, Glass, Hollow Plug, Offset, High vacuum .................................................................................................................. 209Stopcock, Glass, Hollow Plug, T-Type, High vacuum ................................................................................................................ 210

Stopcock Teflon® ................................................................................................................................................................................. 208Stopcock, 1:5 Teflon®, Double Oblique Bore ............................................................................................................................... 208Stopcock, 1:5 Teflon®, T-Bore......................................................................................................................................................... 208Stopcock, Teflon®, 120° Bore .......................................................................................................................................................... 208Stopcock, Teflon®, Four Way .......................................................................................................................................................... 208Stopcock, Teflon® Straight Bore ..................................................................................................................................................... 208

Stopper ................................................................................................................................................................................................. 205Septum Stoppers, Sleeve Type, Septa ............................................................................................................................................ 207Stopper, Cap Design ........................................................................................................................................................................ 205Stopper, Glass, Flask Length, Penny head .................................................................................................................................... 206Stopper, Penny-Head, Glass, Hollow ............................................................................................................................................ 205Stopper, Penny-Head, Glass, Solid ................................................................................................................................................ 205Stopper, Plastic, Flask Length ........................................................................................................................................................ 206Stopper, Spherical, Penny head ...................................................................................................................................................... 206Stopper, Teflon® ................................................................................................................................................................................ 207Stopper, Teflon®, Flask Length ....................................................................................................................................................... 206Stopper, With #15 O-Ring Joint .................................................................................................................................................... 205

Sublimator ...........................................................................................................................................................................................211Sublimator ........................................................................................................................................................................................211Sublimator, With 2mm Glass Stopcock ........................................................................................................................................212

TTrap Vacuum .......................................................................................................................................................................................213

NMR Tube Washer ..........................................................................................................................................................................214Storage Flask, #15 O-Ring Joint .....................................................................................................................................................215Storage Vessel, #15 O-Ring Joint ...................................................................................................................................................214Vacuum Trap, #15 O-Ring Joint ....................................................................................................................................................213Vacuum Trap, 35/20 Ball Joints .....................................................................................................................................................213Vacuum Trap, Dewar Type .............................................................................................................................................................216Vacuum Trap, Micro, Dewar ..........................................................................................................................................................215Vacuum Trap, Serrated Hose Connections ..................................................................................................................................215Vacuum Trap, Spherical Joints .......................................................................................................................................................213Vacuum Trap, With #15 O-Ring Joint ..........................................................................................................................................214

Tube Connecting ................................................................................................................................................................................217Check Valve ......................................................................................................................................................................................217Tube, Connecting, T-Shape ............................................................................................................................................................217Tube, Connecting, Y-Shape ............................................................................................................................................................217

VValve, High Vacuum PTFE................................................................................................................................................................218

Plug, High Vacuum Valve, PTFE Stem, Viton® O-Ring .............................................................................................................218Valve, High Vacuum, PTFE, O-Ring ............................................................................................................................................218Valve, High Vacuum, PTFE, O-Ring, 180° ..................................................................................................................................218Valve, High Vacuum, PTFE, O-ring, Low Hold Up ....................................................................................................................219Valve, High Vacuum, PTFE, O-Ring, Three Way ........................................................................................................................219

Valve, High Vacuum Teflon® Protected ...........................................................................................................................................220Valve, High Vacuum,Teflon® Protected, 90° ................................................................................................................................220Valve, High Vacuum, Teflon® Protected, 90° T- Metering .........................................................................................................221Valve, High Vacuum, Teflon® Protected, 180° .............................................................................................................................220Valve, High Vacuum, Teflon® Protected, Low Hold Up .............................................................................................................220Valve, High Vacuum, Teflon® Protected, Low Hold Up, Metering ...........................................................................................221Valve, High Vacuum, Teflon® Protected, Three Way...................................................................................................................221

Vials & closures ...................................................................................................................................................................................222Crimp Top Headspace Vials (ND 20) ...........................................................................................................................................225Crimp Top Vials Wide Opening and Closures (ND11) .............................................................................................................223Screw Thread Vials Small Opening & Closures (8-425, ND8) ..................................................................................................222Screw Thread Vials Wide Opening and Closures (9-425, ND9) ...............................................................................................222Screw Top Headspace Vials (ND 18) ............................................................................................................................................224Standard Opening Snap Seal Vials and Closures (ND11) .........................................................................................................223

WWatch glass ..........................................................................................................................................................................................226

Watch Glass ......................................................................................................................................................................................226

0-9017.202.01 ..........................20017.202.02 ..........................20017.202.03 ..........................20017.202.04 ..........................20017.202.05 ..........................20019.202.05 ..........................16019.202.06 ..........................16019.202.07 ..........................16020.202.01 ..........................18020.202.02 ..........................18020.202.03 ..........................18033.202.01 ..........................20033.202.02 ..........................20070.202.03 ........................120070.202.04 ........................120070.202.05 ........................120070.202.06 ........................120072.202.01 ........................117072.202.02 ........................117072.202.03 ........................117073.205.01 ........................123075.202.02 ........................116075.202.04 ........................116075.202.05 ........................116075.202.06 ........................116075.202.07 ........................116114.202.01 ..........................37114.202.01F .......................37114.202.02 ..........................37114.202.02F .......................37114.202.03 ..........................37115.202.01 ..........................37115.202.01A .......................37115.202.02 ..........................37115.202.02A .......................37115.202.03 ..........................37115.202.04 ..........................37116.202.01 ..........................37123.202.01 ........................198123.202.02 ........................198123.202.03 ........................198123.202.04 ........................198123.202.05 ........................198123.202.06 ........................198123.202.07 ........................198123.202.08 ........................198123.202.09 ........................198123.202.10 ........................198123.202.11 ........................198123.202.12 ........................198123.202.13 ........................198123.202.14 ........................198123.202.15 ........................198123.202.16 ........................198123.202.17 ........................198123.203.01 ........................199

123.203.02 ........................199124.202.03 ........................198124.202.04 ........................198124.202.05 ........................198124.202.06 ........................198124.202.07 ........................198124.202.08 ........................198125.202.03 ........................199125.202.04 ........................199125.202.05 ........................199125.202.06 ........................199125.202.07 ........................199125.202.08 ........................199129.202.01 ........................131129.202.01A .....................131129.202.02 ........................131129.202.02A .....................131129.202.03 ........................131129.202.03A .....................131129.202.04 ........................131129.202.05 ........................131129.202.06 ........................131129.202.07 ........................131129.202.08 ........................131129.202.09 ........................131129.203.01 ........................132129.203.02 ........................132129.203.02A .....................132129.203.02N ....................132129.203.03 ........................132129.203.04 ........................132129.203.05 ........................132129.203.06 ........................132129.203.07 ........................132129.203.07A .....................132129.203.08 ........................132129.203.08A .....................132129.203.09 ........................132129.203.09A .....................132129.203.10 ........................132129.203.10A .....................132129.203.12 ........................132130.202.01 ........................133130.202.02 ........................133130.202.02A .....................133130.202.03 ........................133130.202.04 ........................133130.202.05 ........................133130.202.06 ........................133130.202.07 ........................133130.202.07A .....................133130.202.08 ........................133130.202.08A .....................133130.202.09 ........................133130.202.09A .....................133130.202.10 ........................133137.202.02 ..........................69137.202.03 ..........................69137.202.04 ..........................69137.202.05 ..........................69138.202.01TC ....................71138.202.02TC ....................71

138.202.02TD ....................70138.202.03TC ....................71138.202.03TD ....................70138.202.04TC ....................71138.202.04TD ....................70138.202.05TC ....................71138.202.05TD ....................70138.202.06TC ....................71138.202.06TD ....................70138.202.07TC ....................71138.202.07TD ....................70138.202.08TC ....................71138.202.08TD ....................70138.202.09TD ....................70139.202.01TC ....................73139.202.01TD ....................72139.202.02TC ....................73139.202.02TD ....................72139.202.03TC ....................73139.202.03TD ....................72139.202.04TC ....................73139.202.04TD ....................72139.202.05TC ....................73139.202.05TD ....................72139.202.06TC ....................73139.202.06TD ....................72139.202.07TC ....................73139.202.07TD ....................72139.202.08TC ....................73139.202.08TD ....................72139.202.09TC ....................73139.202.09TD ....................72140.202.01TC ....................74140.202.02TC ....................74140.202.03TC ....................74140.202.04TC ....................74140.202.05TC ....................74140.202.06TC ....................74140.202.07TC ....................74140.202.08TC ....................74141.202.01 ..........................69141.202.02 ..........................69143.202.01 ..........................69143.202.02 ..........................69224.202.01 ..........................79224.202.02 ..........................79224.202.03 ..........................79224.202.04 ..........................79226.202.01 ..........................82226.202.02 ..........................82227.202.01 ..........................79229.202.02 ..........................31229.202.02A .......................31229.202.03A .......................31229.202.04 ..........................31229.202.05 ..........................31229.202.06 ..........................31229.202.07 ..........................31229.202.08 ..........................31229.202.10 ..........................31229.202.11 ..........................31229.202.12 ..........................31

229.203.07 ..........................30229.203.08 ..........................30229.203.10 ..........................30229.203.11 ..........................30229.203.12 ..........................30229.203.14 ..........................30229.203.16 ..........................30231.202.01 ........................115231.202.01A .....................115231.202.02 ........................115231.202.04 ........................115231.202.05 ........................115231.202.06 ........................115231.202.07 ........................115231.202.08 ........................115231.202.09 ........................115231.202.10 ........................115232.202.01 ........................115232.202.02 ........................115232.202.03 ........................115232.202.04 ........................115232.202.05 ........................115233.202.03 ........................113233.202.04 ........................113233.202.05 ........................113233.202.06 ........................113233.202.08 ........................113235.202.03 ........................114235.202.04 ........................114235.202.05 ........................114235.202.06 ........................114238.202.05 ........................137238.202.07 ........................137238.202.09 ........................137238.202.11 ........................137238.202.12 ........................137238.202.13 ........................137238.203.01 ........................136238.203.02 ........................136238.203.03 ........................136238.203.04 ........................136238.203.05 ........................136239.202.01 ........................138239.202.02 ........................138239.202.03 ........................138239.202.04 ........................138239.202.05 ........................138239.202.06 ........................138239.202.07 ........................138245.202.01 ..........................75245.202.02 ..........................75245.202.03 ..........................75246.202.04 ..........................76246.202.05 ..........................76246.202.06 ..........................76246.202.06A .......................76246.202.07 ..........................76246.202.08 ..........................76246.202.09 ..........................76246.202.10 ..........................76249.202.01 ..........................75249.202.02 ..........................75

Numerical Index

249.202.03 ..........................75250.202.01 ..........................76250.202.03 ..........................76250.202.04 ..........................76255.202.01M ......................68255.202.02C .......................68255.202.02F .......................68255.202.02M ......................68255.202.03C .......................68255.202.03F .......................68255.202.03M ......................68258.202.01 ..........................92258.202.02 ..........................92258.202.03 ..........................92258.245.01 ............. 92, 93, 95258.245.01A .................92, 93258.245.02 ....... 92, 93, 94, 95258.245.03 ..........................92258.245.04 ..........................92258.245.06 ..........................92258.245.07 ..........................92259.202.01 ..........................97259.202.03 ..........................96259.245.01 ....................96, 97259.245.02 ..........................97259.245.03 ....................96, 97259.245.04 ....................96, 97259.245.05 ..........................96259.245.06 ....................96, 97259.245.07 ..........................96259.245.08 ..........................96260.202.01 ..........................93260.245.01A .......................95260.245.02 ..........................93260.245.04 ............. 93, 94, 95260.245.05 ....................93, 94260.245.06 ..........................95260.245.08 ............. 93, 94, 95261.245.01 ..........................94261.245.03 ..........................94262.202.01 ..........................95262.245.03 ..........................95262.245.04 ..........................95262.245.05 ..........................95264.202.01 ..........................32264.202.02 ..........................32264.202.03 ..........................32264.202.04 ..........................32264.202.05 ..........................32264.202.06 ..........................32264.202.07 ..........................32264.202.08 ..........................32264.202.09 ..........................32268.202.01 ..........................35268.202.02 ..........................35268.202.03 ..........................35268.202.04 ..........................35272.232.02A .......................32272.232.03 ..........................32272.232.04 ..........................32272.232.05 ..........................32272.232.06 ..........................32

272.232.07 ..........................32273.232.02A .......................33273.232.03 ..........................33273.232.04 ..........................33273.232.05 ..........................33273.232.06 ..........................33273.232.07 ..........................33274.202.01 ..........................33274.202.02 ..........................33274.202.03 ..........................33274.202.04 ..........................33274.202.05 ..........................33275.202.01 ..........................33275.202.02 ..........................33275.202.03 ..........................33275.202.04 ..........................33275.202.05 ..........................33279.202.01 ..........................34279.202.01A .......................34279.202.02 ..........................34279.202.02A .......................34279.202.03 ..........................34279.202.03A .......................34279.202.04 ..........................34279.202.04A .......................34284.202.02 ..........................34518.303.01 ..........................66518.303.02 ..........................66518.303.03 ..........................66518.303.04 ..........................66518.303.05 ..........................66518.303.06 ..........................66518.303.07 ..........................66519.303.01 ..........................66519.303.02 ..........................66519.303.03 ..........................66519.303.04 ..........................66519.303.05 ..........................66519.303.06 ..........................66519.303.07 ..........................66520.303.01 ..........................66520.303.03 ..........................66520.303.04 ..........................66520.303.05 ..........................66520.303.06 ..........................66520.303.08 ..........................66521.303.01 ..........................67521.303.02 ..........................67521.303.03 ..........................67521.303.04 ..........................67521.303.05 ..........................67521.303.06 ..........................67521.303.07 ..........................67522.303.01 ..........................67522.303.02 ..........................67522.303.03 ..........................67522.303.04 ..........................67522.303.05 ..........................67522.303.06 ..........................67584.303.01 ........................144584.303.02 ........................144584.303.03 ........................144

584.303.04 ........................144584.303.05 ........................144584.303.06 ........................144584.303.07 ........................144

AA0A320-85 ......................183A0A320-110 ....................183A0A320-135 ....................183A0A320-175 ....................183A0A400-175 ....................182A0A400-225 ....................182A0A400-230 ....................182A0A400-250 ....................182A0A400-300 ....................182A050G1030 ........................13A050G1435 ........................13A050G1938 ........... 13, 83, 84A050G2440 ........................13A0000125 ...........................28A0000250 ...........................28A0390-240 .......................183A0390-250 .......................183A0390-260 .......................183A0390-270 .......................183A0390-280 .......................183A01989-1000 ...................180A01989-1001 ...................180A01989-1002 ...................180A01989-1003 ...................180A01989-1004 ...................180A01994-1000 ...................180A01994-1001 ...................180A01994-1002 ...................180A01994-1003 ...................180A01994-1004 ...................180A010607-A ........................85A010607-E .........................84A010607-H ........................84A0011420 ...........................13A0011922 ...........................13A0012440 ...........................13A0015250A ........................28A0015250S .........................28A0015250T ........................28A0024150 ...........................28A0024250 ...........................28A0029150 ...........................28A0029250 ...........................28A0101420 .............................9A0101922 .............................9A0102440 .............................9A0121420 ...........................24A0121922 ...........................24A0122440 ...........................24A0131024 ...........................17A0141420 ...........................19A0141922 ...........................19A0142440 ...........................19A0151420 ...........................18A0151922 ...........................18A0152440 ...........................18A0162440 ...........................10

A0171420 ...........................19A0171922 ...........................19A0172440 ...........................19A0191414 ...........................27A0191919 ...........................27A0192424 ...........................27A0201419 .............................6A0201424 .............................6A0201924 .............................6A0201929 .............................6A0202429 .............................6A0214125 ...........................41A0214250 ...........................41A0221420 ...........................19A0221922 ...........................19A0222440 ...........................19A0231250 ...........................89A0232414 ...........................89A0232419 ...........................89A0232424 ...........................89A0234250 ...........................89A0239250 ...........................89A0251914 .............................6A0252414 .............................6A0252419 .............................6A0252924 .............................6A0262414 ...........................89A0262419 ...........................89A0264100 ...........................89A0272250 ...........................88A0272414 ...........................88A0272419 ...........................88A0272424 ...........................88A0272950 ...........................88A0274250 ...........................88A0281250 ...........................89A0282414 ...........................89A0282419 ...........................89A0282424 ...........................89A0284250 ...........................89A0289250 ...........................89A0291420 ...........................11A0291922 ...........................11A0292440 .....................11, 36A0293520 ...........................15A0301420 .....................11, 75A0301922 ...........................11A0302440 ...........................11A0314075 ...........................12A0314250 ...........................12A0321420 ...........................12A0321922 ...........................12A0322440 ...........................12A0331420 .............................9A0331922 .............................9A0332440 .............................9A0341420 ...........................11A0341922 ...........................11A0342440 ...........................11

A0351419 ...........................17A0351420 ...........................17A0351424 ...........................17A0351922 ...........................17A0351924 ...........................17A0352440 ...........................17A0354914 ...........................17A0361410 ...........................18A0361910 ...........................18A0362410 ...........................18A0371419 ...........................19A0371420 ...........................19A0371922 ...........................19A0371924 ...........................19A0372440 ...........................19A0381420 ...........................21A0381922 ...........................21A0382440 ...........................21A0391420 ...........................27A0391922 ...........................27A0392440 ...........................27A0401922 ...........................26A0402440 ...........................26A0402942 ...........................26A0411419 ...........................16A0411420 ...........................16A0411922 ...........................16A0411924 ...........................16A0412440 ...........................16A0421420 .............................6A0422440 .............................6A0431420 ...........................14A0431421 ...........................14A0431922 ...........................14A0431924 ...........................14A0432440 ...........................14A0451420 ...........................10A0451922 ...........................10A0452440 ...........................10A0491420 ...........................15A0501420 ...........................13A0501922 ...........................13A0502440 ...........................13A0521420 ...........................10A0521922 ...........................10A0522440 ...........................10A0531420 ...........................10A0531922 ...........................10A0532440 ...........................10A0542440 ...........................17A0551420 ...........................78A0551922 ...........................78A0552440 ...........................78A0560001 .............................9A0592440 ...........................79A0601250 ...........................90A0602414 ...........................90A0602419 ...........................90A0602424 ...........................90

A0604250 ...........................90A0609250 ...........................90A0621419 ...........................14A0621420 ...........................14A0621922 ...........................14A0621924 ...........................14A0622440 ...........................14A0631420 .............................9A0631922 .............................9A0632440 .............................9A0641420 ...........................14A0641922 ...........................14A0642440 ...........................14A0651420 ...........................11A0651922 ...........................11A0652440 ...........................11A0663514 .............................7A0663519 .............................7A0663524 .............................7A0663529 .............................7A0671435 .............................7A0671935 .............................7A0672435 .............................7A0672935 .............................7A0681420 ...........................23A0681922 ...........................23A0682440 ...........................23A0701420 ...........................21A0701922 ...........................21A0702440 ...........................21A0711420 ...........................21A0711922 ...........................21A0712440 ...........................21A0721420 ...........................22A0721922 ...........................22A0722440 ...........................22A0741420 ...........................23A0741922 ...........................23A0742440 ...........................23A0761420 ...........................23A0761922 ...........................23A0762440 ...........................23A0791419 .............................6A0791924 .............................6A0793524 .............................6A0801030 .............................7A0801090 .............................7A0804030 .............................7A0804070 .............................7A0804120 .............................7A0804175 .............................7A0809030 .............................7A0809090 .............................7A0809100 .............................7A0811030 .............................8A0811090 .............................8A0814030 .............................8A0814070 .............................8A0814120 .............................8

Numerical Index Prefix ‘CS’

A0814175 .............................8A0819030 .............................8A0819090 .............................8A0821030 .............................8A0821090 .............................8A0824030 .............................8A0824070 .............................8A0824120 .............................8A0824175 .............................8A0829030 .............................8A0829090 .............................8A0831420 ...........................12A0831922 ...........................12A0832440 ...........................12A0841420 ...........................14A0841922 ...........................14A0842415 ...........................14A0842440 ...........................14A0851420 ...........................25A0851922 ...........................25A0852440 ...........................25A0861420 ...........................25A0861922 ...........................25A0862440 ...........................25A0871420 ...........................25A0871922 ...........................25A0872440 ...........................25A0881420 ...........................23A0881922 ...........................23A0882440 ...........................23A0891420 ...........................16A0891922 ...........................16A0892440 ...........................16A0901420 ...........................18A0901922 ...........................18A0902440 ...........................18A0951420 ...........................12A0951922 ...........................12A0952440 ...........................12A0961420 ...........................16A0961922 ...........................16A0962440 ...........................16A0971420 ...........................17A0971922 ...........................17A0972440 ...........................17AA600-10 ........................181AD000611 ..........................82AV-10001 .........................200AV-10005 .........................200AV-10011 .........................200AV-10050 .........................200AV-10055 .........................200AV-10105 .........................200AV-10150 .........................200AV-10155 .........................200AV-10201 .........................200AV-10211 .........................200

BB003040 .............................36B0257040 ...........................26B0257040L .........................26

B0300001 ...........................35B0300002 ...........................35B0300003 ...........................35B0300004 ...........................35B0300005 ...........................35B0300006 ...........................35B0300007 ...........................35B0300008 ...........................35B0300009 ...........................35B0300125C ........................35B0300125X ........................35B0300250C ........................35B0300250X ........................35B0300500C ........................35B0300500X ........................35B0310002 ...........................36B0310350C ........................36BE45-2575-W .................195BEW45-2575-01 .............192BEW45-2575-02 .............192BEW45-2575-03 .............194BEW45-2575-04 .............194BEW45-2575-05 .............194BEW45-2575-W .............193BS-1316-2222 ..................188BS-1316-2432 ..................188BS-1316-2450 ..................188BS-1619-2222 ..................188BS-1619-2432 ..................188BS-1619-2450 ..................188BS-1922-2222 ..................188BS-1922-2432 ..................188BS-1922-2450 ..................188

CC0B203-13 .......................173C0B203-16 .......................173C0B203-21 .......................173C0B203-25 .......................173C0C200-10.......................178C0C200-12.......................178C0C200-14.......................178C0C200-19.......................178C0C200-24.......................178C0C200-29.......................178C0C200-45.......................178C0C210-10.......................178C0C210-12.......................178C0C210-14.......................178C0C210-19.......................178C0C210-24.................36, 178C0C210-29.......................178C0C210-34.......................178C0C210-40.......................178C0C210-45.......................178C0C220-14.......................177C0C220-19.......................177C0C220-24.......................177C0C220-29.......................177C0D950-06 ......................181C0H01034 ..........................64C0H01538 ..........................64

C0H03045 ..........................64C0H04054 ..........................64C0H05054 ..........................64C0H10066 ..........................64C0J170-20 ........................172C0J170-21 ........................172C0J205-30 ........................176C0L00834 ...........................65C0L01747 ...........................65C0L03054 ...........................65C0L05066 ...........................65C0L10080 ...........................65C0L15090 ...........................65C0P850-100 .....................184C0P850-120 .....................184C0P850-125 .....................184C0P850-140 .....................184C0P850-150 .....................184C0P850-160 .....................184C0P850-180 .....................184C0P850-200 .....................184C0P850-250 .....................184C0P900-100 .....................184C0P900-120 .....................184C0P900-125 .....................184C0P900-140 .....................184C0P900-150 .....................184C0P900-160 .....................184C0P900-180 .....................184C0P900-200 .....................184C0P900-250 .....................184C0S610-12 .................28, 177C0S610-18 .......................177C0S610-28 .......................177C0S610-35 .......................177C0S610-50 .......................177C0S610-65 .......................177C0000003 ...........................55C0000006 ...........................55C0000045 ...........................55C01301 ...............................38C01302 ...............................38C-1316-08 ........................190C-1316-10 ........................190C-1316-11 ........................190C-1316-12 ........................190C-1316-13 ........................190C-1316-14 ........................190C-1316-15 ........................190C-1316-16 ........................190C-1316-18 ........................190C-1316-20 ........................190C-1316-22 ........................190C-1316-24 ........................190C-1316-25 ........................190C01324 ...............................38C01345 ...............................38C-1619-08 ........................190C-1619-10 ........................190C-1619-11 ........................190C-1619-12 ........................190C-1619-13 ........................190C-1619-14 ........................190

C-1619-15 ........................190C-1619-16 ........................190C-1619-18 ........................190C-1619-20 ........................190C-1619-22 ........................190C-1619-24 ........................190C-1619-25 ........................190C-1922-08 ........................191C-1922-10 ........................191C-1922-11 ........................191C-1922-12 ........................191C-1922-13 ........................191C-1922-14 ........................191C-1922-15 ........................191C-1922-16 ........................191C-1922-18 ........................191C-1922-20 ........................191C-1922-22 ........................191C-1922-24 ........................191C-1922-25 ........................191C010607-B .........................85C010607-C.........................84C013110H ..........................64C013208L ...........................65C013515H ..........................64C014117L ...........................65C014330H ..........................64C015030L ...........................65C015040H ..........................64C015350H ..........................64C016150L ...........................65C016500H ..........................64C017600L ...........................65C018450L ...........................65C018451L ...........................38C018452L ...........................38C019501L ...........................38C019502L ...........................38C021607-B .........................83C021607-C.........................83C041451L ...........................41C041452L ...........................41C0101075 ...........................56C0101100 ...........................56C0101420 ...........................56C0101922 ...........................56C0102441 ...........................56C0102442 ...........................56C0102443 ...........................56C0104150 ...........................56C0109130 ...........................56C0111420 ...........................57C0111922 ...........................57C0112440 ...........................57C0114150 ...........................57C0114200 ...........................57C0114250 ...........................57C0121100 ...........................58C0121120 ...........................58C0124200 ...........................58C0124250 ...........................58C0124300 ...........................58C0124400 ...........................58

C0129200 ...........................58C0141120 ...........................59C0144200 ...........................59C0144250 ...........................59C0144300 ...........................59C0144400 ...........................59C0144500 ...........................59C0149120 ...........................59C0149200 ...........................59C0149250 ...........................59C0149300 ...........................59C0149400 ...........................59C0150190 ...........................59C0151110 ...........................59C0151190 ...........................59C0151200 ...........................59C0154100 ...........................59C0154200 ...........................59C0154300 ...........................59C0159190 ...........................59C0159200 ...........................59C0161100 ...........................56C0164250 ...........................56C0169130 ...........................56C0169250 ...........................56C0171120 ...........................56C0171200 ...........................56C0174200 ...........................56C0179110 ...........................56C0179200 ...........................56C0182402 ...........................38C0182403 ...........................38C0184100 ...........................38C0184171 ...........................44C0184171C ........................45C0184172 ...........................44C0184172C ........................45C0184173 ...........................44C0184173C ........................45C0184174 ...........................44C0184174C ........................45C0184261 ...........................44C0184261C ........................45C0184262 ...........................44C0184262C ........................45C0184263 ...........................44C0184263C ........................45C0184264 ...........................44C0184264C ........................45C0184321 ...........................44C0184321C ........................45C0184322 ...........................44C0184322C ........................45C0184323 ...........................44C0184323C ........................45C0184324 ...........................44C0184324C ........................45C0184461 ...........................44C0184461C ........................45C0184462 ...........................44C0184462C ........................45C0184463 ...........................44C0184463C ........................45

C0184464 ...........................44C0184464C ........................45C0184601 ...........................44C0184601C ........................45C0184602 ...........................44C0184602C ........................45C0184603 ...........................44C0184603C ........................45C0184604 ...........................44C0184604C ........................45C0184605 ...........................44C0184605C ........................45C0184801 ...........................44C0184801C ........................45C0184802 ...........................44C0184802C ........................45C0184803 ...........................44C0184803C ........................45C0184804 ...........................44C0184804C ........................45C0184805 ...........................44C0184805C ........................45C0185500 ...........................38C0193502 ...........................38C0193503 ...........................38C0195100 ...........................38C0195171 ...........................48C0195171C ........................49C0195172 ...........................48C0195172C ........................49C0195173 ...........................48C0195173C ........................49C0195261 ...........................48C0195261C ........................49C0195262 ...........................48C0195262C ........................49C0195263 ...........................48C0195263C ........................49C0195264 ...........................48C0195264C ........................49C0195321 ...........................48C0195321C ........................49C0195322 ...........................48C0195322C ........................49C0195323 ...........................48C0195323C ........................49C0195324 ...........................48C0195324C ........................49C0195461 ...........................48C0195461C ........................49C0195462 ...........................48C0195462C ........................49C0195463 ...........................48C0195463C ........................49C0195464 ...........................48C0195464C ........................49C0195500 ...........................38C0195601 ...........................48C0195601C ........................49C0195602 ...........................48C0195602C ........................49C0195603 ...........................48C0195603C ........................49

C0195604 ...........................48C0195604C ........................49C0195605 ...........................48C0195605C ........................49C0195801 ...........................48C0195801C ........................49C0195802 ...........................48C0195802C ........................49C0195803 ...........................48C0195803C ........................49C0195804 ...........................48C0195804C ........................49C0195805 ...........................48C0195805C ........................49C0201120 ...........................62C0204200 ...........................62C0204250 ...........................62C0204300 ...........................62C0204400 ...........................62C0204500 ...........................62C0209180 ...........................62C0209300 ...........................62C0214210 ...........................41C0214225 ...........................41C0214250 ...........................41C0243445 ...........................91C0244500 ...........................91C0245550 ...........................91C0251120 ...........................62C0251200 ...........................62C0254300 ...........................62C0254400 ...........................62C0259200 ...........................62C0259300 ...........................62C0261100 ...........................57C0262280 ...........................57C0264125 ...........................57C0264175 ...........................57C0264225 ...........................57C0264275 ...........................57C0269100 ...........................57C0281014 ...........................63C0281019 ...........................63C0281031 ...........................63C0281931 ...........................63C0282440 ...........................63C0282450 ...........................63C0282475 ...........................63C0314125 ...........................60C0314175 ...........................60C0334250 ...........................61C0334300 ...........................61C0334400 ...........................61C0334500 ...........................61C0339250 ...........................61C0341014 ...........................63C0341019 ...........................63C0341031 ...........................63C0341931 ...........................63C0342440 ...........................63C0342450 ...........................63C0342475 ...........................63C0351420 ...........................61

C0351922 ...........................61C0361720 ...........................42C0361720C ........................43C0361725 ...........................42C0361725C ........................43C0361730 ...........................42C0361730C ........................43C0361740 ...........................42C0361740C ........................43C0362620 ...........................42C0362620C ........................43C0362625 ...........................42C0362625C ........................43C0362630 ...........................42C0362630C ........................43C0362640 ...........................42C0362640C ........................43C0363220 ...........................42C0363220C ........................43C0363225 ...........................42C0363225C ........................43C0363230 ...........................42C0363230C ........................43C0363240 ...........................42C0363240C ........................43C0364620 ...........................42C0364620C ........................43C0364625 ...........................42C0364625C ........................43C0364630 ...........................42C0364630C ........................43C0364640 ...........................42C0364640C ........................43C0366020 ...........................42C0366020C ........................43C0366025 ...........................42C0366025C ........................43C0366030 ...........................42C0366030C ........................43C0366040 ...........................42C0366040C ........................43C0366060 ...........................42C0366060C ........................43C0368020 ...........................42C0368020C ........................43C0368025 ...........................42C0368025C ........................43C0368030 ...........................42C0368030C ........................43C0368040 ...........................42C0368040C ........................43C0368060 ...........................42C0368060C ........................43C0371720 ...........................46C0371720C ........................47C0371730 ...........................46C0371730C ........................47C0371740 ...........................46C0371740C ........................47C0372620 ...........................46C0372620C ........................47C0372625 ...........................46C0372625C ........................47

C0372630 ...........................46C0372630C ........................47C0372640 ...........................46C0372640C ........................47C0373220 ...........................46C0373220C ........................47C0373225 ...........................46C0373225C ........................47C0373230 ...........................46C0373230C ........................47C0373240 ...........................46C0373240C ........................47C0374620 ...........................46C0374620C ........................47C0374625 ...........................46C0374625C ........................47C0374630 ...........................46C0374630C ........................47C0374640 ...........................46C0374640C ........................47C0376020 ...........................46C0376020C ........................47C0376025 ...........................46C0376025C ........................47C0376030 ...........................46C0376030C ........................47C0376040 ...........................46C0376040C ........................47C0376060 ...........................46C0376060C ........................47C0378020 ...........................46C0378020C ........................47C0378025 ...........................46C0378025C ........................47C0378030 ...........................46C0378030C ........................47C0378040 ...........................46C0378040C ........................47C0378060 ...........................46C0378060C ........................47C0381720 ...........................50C0381720C ........................51C0381730 ...........................50C0381730C ........................51C0381740 ...........................50C0381740C ........................51C0382620 ...........................50C0382620C ........................51C0382625 ...........................50C0382625C ........................51C0382630 ...........................50C0382630C ........................51C0382640 ...........................50C0382640C ........................51C0383220 ...........................50C0383220C ........................51C0383225 ...........................50C0383225C ........................51C0383230 ...........................50C0383230C ........................51C0383240 ...........................50C0383240C ........................51C0384620 ...........................50

C0384620C ........................51C0384625 ...........................50C0384625C ........................51C0384630 ...........................50C0384630C ........................51C0384640 ...........................50C0384640C ........................51C0386020 ...........................50C0386020C ........................51C0386025 ...........................50C0386025C ........................51C0386030 ...........................50C0386030C ........................51C0386040 ...........................50C0386040C ........................51C0386060 ...........................50C0386060C ........................51C0388020 ...........................50C0388020C ........................51C0388025 ...........................50C0388025C ........................51C0388030 ...........................50C0388030C ........................51C0388040 ...........................50C0388040C ........................51C0388060 ...........................50C0388060C ........................51C0404171 ...........................52C0404171C ........................53C0404172 ...........................52C0404172C ........................53C0404173 ...........................52C0404173C ........................53C0404174 ...........................52C0404174C ........................53C0404261 ...........................52C0404261C ........................53C0404262 ...........................52C0404262C ........................53C0404263 ...........................52C0404263C ........................53C0404264 ...........................52C0404264C ........................53C0404321 ...........................52C0404321C ........................53C0404322 ...........................52C0404322C ........................53C0404323 ...........................52C0404323C ........................53C0404324 ...........................52C0404324C ........................53C0404461 ...........................52C0404461C ........................53C0404462 ...........................52C0404462C ........................53C0404463 ...........................52C0404463C ........................53C0404464 ...........................52C0404464C ........................53C0404601 ...........................52C0404601C ........................53C0404602 ...........................52C0404602C ........................53

C0404603 ...........................52C0404603C ........................53C0404604 ...........................52C0404604C ........................53C0404605 ...........................52C0404605C ........................53C0405801 ...........................52C0405801C ........................53C0405802 ...........................52C0405802C ........................53C0405803 ...........................52C0405803C ........................53C0405804 ...........................52C0405804C ........................53C0405805 ...........................52C0405805C ........................53C0414000 ...........................41C0414100 ...........................41C0414250 ...........................41C0414500 ...........................41C0415500 ...........................41C0432440 ...........................40C0434550 ...........................40C0501120 ...........................63C0504200 ...........................63C0504250 ...........................63C0504300 ...........................63C0504400 ...........................63C0504500 ...........................63C0509180 ...........................63C0509300 ...........................63C0521100 ...........................58C0521120 ...........................58C0524200 ...........................58C0524300 ...........................58C0524400 ...........................58C0529200 ...........................58C0534125 ...........................60C0534175 ...........................60C0541120 ...........................59C0544200 ...........................59C0544250 ...........................59C0544300 ...........................59C0544400 ...........................59C0544500 ...........................59C0549200 ...........................59C0550190 ...........................60C0551110 ...........................60C0551190 ...........................60C0551200 ...........................60C0554100 ...........................60C0554200 ...........................60C0554300 ...........................60C0559190 ...........................60C0559200 ...........................60C0561100 ...........................58C0562280 ...........................58C0564125 ...........................58C0564175 ...........................58C0564225 ...........................58C0564275 ...........................58C0569100 ...........................58C0581420 ...........................61

C0581922 ...........................61C0621120 ...........................62C0621200 ...........................62C0624300 ...........................62C0624400 ...........................62C0629200 ...........................62C0629300 ...........................62CB170-10 .........................180CC0210-14 ........................78CC0210-19 ........................78CC0210-24 ........... 28, 78, 79Clamp .................................84CPS11 ...............................223CPS11-PSP ......................223CPS20 ...............................225CPS20M ...........................225CS08 .................................222CS08P ...............................222CS09 .................................222CS09P ...............................222CS09-PSP .........................222CS18 .................................224CS610-35 .........................213CT250001 ..........................54

DD0K110-10 ......................177D0K110-20 ......................177D0R650-32 ......................181D0R650-48 ......................181D0R650-50 ......................181D0112440G .......................81D0133424 ...........................82D0133424G .......................82D0141014 ...........................80D0161420 ...........................77D0161922 ...........................77D0162440 ...........................77D0171014 ...........................80D0191420 ...........................78D0191922 ...........................78D0192440 ...........................78D0201414 ...........................78D0201922 ...........................78D0202424 .....................78, 79D0211100 ...........................80D0211150 ...........................80D0214200 ...........................80D0214300 ...........................80D0222434 ...........................82D0232440G .....................212D0281005 ...........................75D0281010 ...........................75D0281015 ...........................75D0281025 ...........................75D0281050 ...........................75D0351403 ...........................77

EE0103424 ...........................91E0104524 ...........................91E0105550 ...........................91

E0120200 ...........................91

FF0C200-125 .....................178F0C200-140 .....................178F0C200-160 .....................178F0C200-180 .....................178F0C200-200 .....................178F0C200-250 .....................178F0C210-125 .....................179F0C211-120 .....................179F0C212-120 .....................179F0C213-126 .....................179F0C214-102 .....................179F0D100-25 .......................174F0T260-40 .......................174F0T260-65 .......................174F0W100-25 ......................172F0W100-45 ......................172F0W162-25 ......................172F0W162-40 ......................172F0W162-80 ......................172F0W200-30 ......................172F0W200-70 ......................172F0W230-30 ......................172F0W230-70 ......................172F06606-1 ............................83F06606-2 ............................83F06606-3 ............................83F06606-4 ............................83F06606-5 ............................83F010607-D .........................84F010607-G .........................84F021242L .........................113F021342L .........................113F021607-F ..........................83F021841L .........................113F021842L .........................113F022242L .........................112F030242L .........................107F030243L .........................107F041241L .........................109F041242L .........................109F041611L .........................109F041621L .........................109F042252L .........................112F042441L .........................112F042442L .........................112F043242L .........................110F043401L .........................110F043411L .........................110F043491L .........................110F044242L .........................111F044411L .........................111F044491L .........................111F049041L .........................127F049081L .........................127F052702L .........................107F054241L .........................127F062241L .........................139F067241L .........................140F067241LG ......................139

F068272L .........................142F068272LG ......................142F0121450 .........................114F0121950 .........................114F0122450 .........................114F0124000 .........................114F0124000A ......................114F0124100 .........................114F0124125 .........................114F0124250 .........................114F0124250A ......................114F0124500 .........................114F0124500A ......................114F0129100 .........................114F0131010 .........................118F0131025 .........................118F0131214 .........................118F0131415 .........................118F0139200 .........................118F0141100 .........................108F0141250 .........................108F0141425 .........................108F0141450 .........................108F0141950 .........................108F0144100 .........................108F0144250 .........................108F0144500 .........................108F0149100 .........................108F0149250 .........................108F0150025 .........................122F0150050 .........................122F0150125 .........................122F0150250 .........................122F0150500 .........................122F0151000 .........................122F0152000 .........................122F0154000 .........................122F0155000 .........................122F0155251 .........................122F0155252 .........................122F0155500 .........................122F0181950 .........................136F0181975 .........................136F0182450 .........................136F0182475 .........................136F0184100 .........................136F0189100 .........................136F0191450 .........................136F0191950 .........................136F0192475 .........................136F0194100 .........................136F0211250 .........................113F0211500 .........................113F0212500 .........................113F0214000 .........................113F0214091 .........................113F0214190 .........................113F0214250 .........................113F0214259 .........................113F0214500 .........................113F0214591 .........................113F0218500 .........................113F0219140 .........................113

F0219250 .........................113F0219500 .........................113F0221100 .........................112F0221125 .........................112F0221150 .........................112F0221250 .........................112F0221500 .........................112F0221925 .........................112F0221950 .........................112F0224000 .........................112F0224250 .........................112F0224500 .........................112F0229100 .........................112F0229250 .........................112F0229500 .........................112F0234020C .........................39F0234020M ........................39F0234030C .........................39F0234030M ........................39F0236020C .........................39F0236020M ........................39F0236030C .........................39F0236030M ........................39F0236040C .........................39F0236040M ........................39F0238520C .........................39F0238520M ........................39F0238530C .........................39F0238530M ........................39F0238540C .........................39F0238540M ........................39F0291210 ...................39, 137F0291275 ...................39, 137F0291910 ...................39, 137F0291975 ...................39, 137F0292810 ...................39, 137F0292812 ...................39, 137F0301100 .........................107F0301250 .........................107F0301405 .........................107F0301410 .........................107F0301425 .........................107F0301450 .........................107F0301910 .........................107F0301925 .........................107F0301950 .........................107F0302425 .........................107F0302450 .........................107F0304000 .........................107F0304100 .........................107F0304250 .........................107F0304500 .........................107F0309100 .........................107F0309250 .........................107F0309500 .........................107F0311100 .........................121F0311200 .........................121F0311250 .........................121F0311405 .........................121F0311410 .........................121F0311425 .........................121F0311450 .........................121F0311910 .........................121

F0311925 .........................121F0311950 .........................121F0312425 .........................121F0312450 .........................121F0314000 .........................121F0314100 .........................121F0314200 .........................121F0314250 .........................121F0314500 .........................121F0319100 .........................121F0319200 .........................121F0319250 .........................121F0321100 .........................118F0321200 .........................118F0321225 .........................118F0321250 .........................118F0321405 .........................118F0321410 .........................118F0321415 .........................118F0322450 .........................118F0324100 .........................118F0324200 .........................118F0329100 .........................118F0329200 .........................118F0329205 .........................118F0329210 .........................118F0329225 .........................118F0329250 .........................118F0331100 .........................108F0331405 .........................108F0331410 .........................108F0331425 .........................108F0331450 .........................108F0331905 .........................108F0331910 .........................108F0331925 .........................108F0331950 .........................108F0334000 .........................108F0334250 .........................108F0334500 .........................108F0339100 .........................108F0341100 .........................119F0341105 .........................119F0341110 .........................119F0341115 .........................119F0341125 .........................119F0341150 .........................119F0341200 .........................119F0341900 .........................119F0341910 .........................119F0341925 .........................119F0341950 .........................119F0349200 .........................119F0349900 .........................119F0349910 .........................119F0349920 .........................119F0349925 .........................119F0349950 .........................119F0351420C .......................135F0351420M ......................135F0351430C .......................135F0351430M ......................135F0352440C .......................135

F0352440M ......................135F0362014C .......................146F0362014F .......................146F0362014M ......................146F0362019C .......................146F0362019F .......................146F0362019M ......................146F0362024C .......................146F0362024F .......................146F0362024M ......................146F0363014C .......................146F0363014F .......................146F0363014M ......................146F0363019C .......................146F0363019F .......................146F0363019M ......................146F0363024C .......................146F0363024F .......................146F0363024M ......................146F0364014C .......................146F0364014F .......................146F0364014M ......................146F0364019C .......................146F0364019F .......................146F0364019M ......................146F0364024C .......................146F0364024F .......................146F0364024M ......................146F0366019C .......................146F0366019F .......................146F0366019M ......................146F0366024C .......................146F0366024F .......................146F0366024M ......................146F0368024C .......................146F0368024F .......................146F0368024M ......................146F0369024C .......................146F0369024F .......................146F0369024M ......................146F0371460C .......................134F0371460M ......................134F0374200C .......................134F0374200M ......................134F0384020C .........................40F0384020M ........................40F0384030C .........................40F0384030M ........................40F0386020C .........................40F0386020M ........................40F0386030C .........................40F0386030M ........................40F0386040C .........................40F0386040M ........................40F0388520C .........................40F0388520M ........................40F0388530C .........................40F0388530M ........................40F0388540C .........................40F0388540M ........................40F0392475 .........................136F0394100 .........................136F0401460C .......................134

F0401460M ......................134F0404200C .......................134F0404200M ......................134F0410250 .........................109F0411100 .........................109F0411110 .........................109F0411125 .........................109F0411150 .........................109F0411250 .........................109F0411410 .........................109F0411501 .........................109F0411900 .........................109F0411925 .........................109F0411950 .........................109F0414100 .........................109F0414150 .........................109F0414250 .........................109F0414251 .........................109F0414259 .........................109F0414400 .........................109F0414450 .........................109F0414501 .........................109F0414504 .........................109F0414509 .........................109F0414910 .........................109F0414950 .........................109F0419100 .........................109F0419250 .........................109F0419501 .........................109F0419509 .........................109F0419900 .........................109F0419925 .........................109F0419950 .........................109F0424450 .........................112F0430050 .........................110F0430250 .........................110F0430500 .........................110F0431100 .........................110F0431110 .........................110F0431125 .........................110F0431150 .........................110F0431250 .........................110F0431500 .........................110F0432250 .........................110F0432500 .........................110F0434100 .........................110F0434150 .........................110F0434250 .........................110F0434400 .........................110F0434450 .........................110F0434500 .........................110F0434900 .........................110F0434950 .........................110F0439100 .........................110F0439125 .........................110F0439150 .........................110F0439250 .........................110F0439500 .........................110F0439900 .........................110F0439925 .........................110F0439950 .........................110F0440250 .........................111F0440500 .........................111

F0441100 .........................111F0441150 .........................111F0441250 .........................111F0441500 .........................111F0442250 .........................111F0442500 .........................111F0444000 .........................111F0444100 .........................111F0444250 .........................111F0444400 .........................111F0444500 .........................111F0444900 .........................111F0449100 .........................111F0449150 .........................111F0449250 .........................111F0449500 .........................111F0449900 .........................111F0449950 .........................111F0451025 .........................142F0451025A ......................142F0451050 .........................142F0451050A ......................142F0451125 .........................142F0451125A ......................142F0451250 .........................142F0451250A ......................142F0454125 .........................142F0454125A ......................142F0454250 .........................142F0454250A ......................142F0459025 .........................142F0459025A ......................142F0459050 .........................142F0459050A ......................142F0459125 .........................142F0459125A ......................142F0459250 .........................142F0459250A ......................142F0461010 .........................130F0461025 .........................130F0461050 .........................130F0461100 .........................130F0461250 .........................130F0461500 .........................130F0461508 .........................130F0464000 .........................130F0464008 .........................130F0464100 .........................130F0464250 .........................130F0464500 .........................130F0464508 .........................130F0471330 .........................141F0471330A ......................141F0471660 .........................141F0471660A ......................141F0472125 .........................141F0472125A ......................141F0472250 .........................141F0472250A ......................141F0474125AG ...................141F0474250AG ...................141F0474500AG ...................141F0477000 .........................141

F0477000A ......................141F0477500 .........................141F0477500A ......................141F0478000 .........................141F0478000A ......................141F0481500 .........................130F0481508 .........................130F0484000 .........................130F0484008 .........................130F0484250 .........................130F0484258 .........................130F0484500 .........................130F0484508 .........................130F0490010 .........................127F0490025 .........................127F0490050 .........................127F0490100 .........................127F0490250 .........................127F0490258 .........................127F0490500 .........................127F0490508 .........................127F0513030C .......................144F0513030M ......................144F0514060C .......................144F0514060M ......................144F0516150C .......................144F0516150M ......................144F0527000 .........................107F0527050 .........................107F0527100 .........................107F0527250 .........................107F0527500 .........................107F0531050 .........................125F0531100 .........................125F0531250 .........................125F0531950 .........................125F0534100 .........................125F0534250 .........................125F0534500 .........................125F0539100 .........................125F0539250 .........................125F0541050 .........................127F0541100 .........................127F0541250 .........................127F0541950 .........................127F0544100 .........................127F0544250 .........................127F0544500 .........................127F0549100 .........................127F0549250 .........................127F0551060 .........................135F0554200 .........................135F0561025 .........................124F0561050 .........................124F0561100 .........................124F0564100 .........................124F0564250 .........................124F0564350 .........................124F0571025 .........................125F0571050 .........................125F0571100 .........................125F0574100 .........................125F0574250 .........................125

F0574350 .........................125F0580025 .........................124F0580050 .........................124F0580100 .........................124F0580825 .........................124F0580850 .........................124F0584250 .........................124F0584350 .........................124F0588100 .........................124F0588250 .........................124F0588350 .........................124F0601000C .......................147F0601000F .......................147F0601000M ......................147F0601002C .......................147F0601002F .......................147F0601002M ......................147F0602000C .......................147F0602000F .......................147F0602000M ......................147F0602015C .......................147F0602015F .......................147F0602015M ......................147F0603000C .......................147F0603000F .......................147F0603000M ......................147F0603030C .......................147F0603030F .......................147F0603030M ......................147F0604060C .......................147F0604060F .......................147F0604060M ......................147F0606150C .......................147F0606150F .......................147F0606150M ......................147F0608350C .......................147F0608350F .......................147F0608350M ......................147F0609600C .......................147F0609600F .......................147F0609600M ......................147F0621125 .........................139F0621425 .........................139F0621460 .........................139F0621925 .........................139F0621960 .........................139F0622425 .........................139F0622460 .........................139F0624125 .........................139F0624250 .........................139F0624500 .........................139F0629125 .........................139F0629250 .........................139F0641125 .........................140F0641425 .........................140F0641460 .........................140F0641960 .........................140F0642460 .........................140F0644125 .........................140F0644250 .........................140F0649125 .........................140F0649250 .........................140F0661125 .........................116

F0661405 .........................116F0661410 .........................116F0661425 .........................116F0661450 .........................116F0661910 .........................116F0661925 .........................116F0661950 .........................116F0662450 .........................116F0664000 .........................116F0664125 .........................116F0664250 .........................116F0664500 .........................116F0669125 .........................116F0671125 .........................140F0671125G ......................139F0671425 .........................140F0671425G ......................139F0671460 .........................140F0671460G ......................139F0671925 .........................140F0671925G ......................139F0671960 .........................140F0671960G ......................139F0672460 .........................140F0672460G ......................139F0674125 .........................140F0674125G ......................139F0674250 .........................140F0674250G ......................139F0674500 .........................140F0674500G ......................139F0679125 .........................140F0679125G ......................139F0679250 .........................140F0679250G ......................139F0687000 .........................142F0687000G ......................142F0687500 .........................142F0687500G ......................142F0691025 .........................126F0691050 .........................126F0691100 .........................126F0694100 .........................126F0694250 .........................126F0694350 .........................126F0701420C .......................135F0701420M ......................135F0701430C .......................135F0701430M ......................135F0702440C .......................135F0702440M ......................135F0740027 .........................137F0761100 .........................129F0761108 .........................129F0761250 .........................129F0761258 .........................129F0761350 .........................129F0761358 .........................129F0761425 .........................129F0761450 .........................129F0761950 .........................129F0762450 .........................129F0764100 .........................129

F0764108 .........................129F0764250 .........................129F0764258 .........................129F0764350 .........................129F0764358 .........................129F0769100 .........................129F0769108 .........................129F0769250 .........................129F0769258 .........................129F0769350 .........................129F0769358 .........................129F0804260 .........................145F0806150 .........................145F0808350 .........................145F0809600 .........................145F0891100 .........................126F0891410 .........................126F0891425 .........................126F0891450 .........................126F0891950 .........................126F0892450 .........................126F0894100 .........................126F0894200 .........................126F0894250 .........................126F0899100 .........................126F0899200 .........................126F0901100 .........................128F0901100G ......................128F0901100H ......................128F0901200 .........................128F0901200G ......................128F0901200H ......................128F0901410 .........................128F0901410G ......................128F0901425 .........................128F0901425G ......................128F0901425H ......................128F0901450 .........................128F0901450G ......................128F0901450H ......................128F0901950 .........................128F0901950G ......................128F0901950H ......................128F0902450 .........................128F0902450G ......................128F0902450H ......................128F0904000 .........................128F0904000G ......................128F0904000H ......................128F0904100 .........................128F0904100G ......................128F0904100H ......................128F0904200 .........................128F0904200G ......................128F0904200H ......................128F0904500 .........................128F0904500G ......................128F0904500H ......................128F0909100 .........................128F0909100G ......................128F0909100H ......................128F0909200 .........................128F0909200G ......................128

F0909200H ......................128F0963014 .........................145F0963019 .........................145F0963024 .........................145F0964014 .........................145F0964019 .........................145F0964024 .........................145F0966019 .........................145F0966024 .........................145F0968024 .........................145F0969024 .........................145F0973014C .......................134F0973014M ......................134F0973024C .......................134F0973024M ......................134F0974024C .......................134F0974024M ......................134FC451027 .........................143FC451222 .........................143FC452522 .........................143FC455027 .........................143FC456016 .........................143FC471224 .........................143FC472540 .........................143FC475014 .........................143FC475024 .........................143

GG0L7268-3 .........................55G0L7268-4 .........................55G0L7268-5 .........................55G0L7268-6 .........................55G0260810C ......................148G0260810M .....................148G0260820C ......................148G0260830C ......................148G0260830M .....................148G0260840C ......................148G0260840M .....................148G0271018C ......................148G0271018M .....................148G0272025C ......................148G0272025M .....................148G0273035C ......................148G0273035M .....................148G0274045C ......................148G0274045M .....................148G0282035C ......................149G0282035M .....................149G0283045C ......................149G0283045M .....................149G0284060C ......................149G0284060M .....................149GE45-2575-W .................195GE90-2575-W .................195GEW45-2575-01 .............192GEW45-2575-02 .............192GEW45-2575-03 .............194GEW45-2575-04 .............194GEW45-2575-05 .............194GEW45-2575-B ..............193GEW45-2575-G ..............193

GEW45-2575-I ...............193GEW45-2575-O ..............193GEW45-2575-P ..............193GEW45-2575-T ..............193GEW45-2575-W .............193GEW45-2575-Y ..............193GEW90-2575-01 .............192GEW90-2575-02 .............192GEW90-2575-03 .............194GEW90-2575-04 .............194GEW90-2575-05 .............194GEW90-2575-W .............193GLMC1322 ......................103GLMC1345 ......................103GLMC2522 ......................103GLMC2545 ......................103GLMN1322 .....................105GLMN1345 .....................105GLMN2522 .....................105GLMN2545 .....................105GLMN4722 .....................105GLMN4745 .....................105GLMPT1322....................105GLMPT1345....................105GLMPT2522....................105GLMPT2545....................105GLMPT4722....................105GLMPT4745....................105GLMPV1322 ...................106GLMPV1345 ...................106GLMPV2522 ...................106GLMPV2545 ...................106GLMPV4722 ...................106GLMPV4745 ...................106GLN1322 .........................102GLN1345 .........................102GLN2522 .........................102GLN2545 .........................102GLN3022 .........................102GLN3045 .........................102GLPES1322 ......................104GLPES1345 ......................104GLPES2522 ......................104GLPES2545 ......................104GLPES3022 ......................104GLPES3045 ......................104GLPP1322 ........................104GLPP1345 ........................104GLPP2522 ........................104GLPP2545 ........................104GLPP3022 ........................104GLPP3045 ........................104GLPT1322 .......................102GLPT1345 .......................102GLPT2522 .......................102GLPT2545 .......................102GLPT3022 .......................102GLPT3045 .......................102GLPV1322 .......................103GLPV1345 .......................103GLPV2522 .......................103GLPV2545 .......................103GLPV3022 .......................103

GLPV3045 .......................103

HH0300-60 .........................183H0300-80 .........................183H0300-100 .......................183H0300-120 .......................183H0300-140 .......................183H0320-50 .........................184H0320-60 .........................184H0320-80 .........................184H0320-100 .......................184H0320-120 .......................184H0320-140 .......................184H0330-50 .........................185H0330-60 .........................185H0330-80 .........................185H0330-100 .......................185H0330-120 .......................185H0330-140 .......................185H0400-80 .........................185H0400-120 .......................185H0400-150 .......................185

JJP00001 ..............................29

LLJ450-100 .........................182LJ450-150 .........................182LJ450-200 .........................182LJ450-250 .........................182

MM0101003 ........................151M0101004 ........................151M0101005 ........................151M0111003 ........................150M0111004 ........................150M0111005 ........................150M0131514 ........................171M0131519 ........................171M0131524 ........................171M0131604 ........................171M0131605 ........................171M0141003 ........................151M0141004 ........................151M0141005 ........................151M0150004 ........................170M0164380 ........................171M0171003 ........................150M0171004 ........................150M0171005 ........................150M0181003 ........................153M0181004 ........................153M0181005 ........................153M0190042 ........................161M0190044 ........................161M0190062 ........................161M0190064 ........................161M0202403 ........................163

M0202404 ........................163M0202405 ........................163M0211042 ........................165M0211044 ........................165M0221420 ........................167M0221922 ........................167M0222440 ........................167M0230003 ........................157M0230004 ........................157M0230005 ........................157M0240003 ........................158M0240004 ........................158M0240005 ........................158M0250003 ........................157M0250004 ........................157M0250005 ........................157M0260003 ........................158M0260004 ........................158M0260005 ........................158M0270003 ........................168M0270004 ........................168M0270005 ........................168M0280003 ........................159M0280004 ........................159M0280005 ........................159M0290003 ........................159M0290004 ........................159M0290005 ........................159M0300003 ........................160M0300004 ........................160M0300005 ........................160M0311508 ........................170M0321420 ........................167M0321922 ........................167M0322440 ........................167M0330804 ........................170M0340004 ........................168M0350004 ........................169M0360004 ........................169M0401003 ........................154M0401004 ........................154M0401005 ........................154M0411003 ........................153M0411004 ........................153M0411005 ........................153M0421003 ........................154M0421004 ........................154M0421005 ........................154M0431003 ........................155M0431004 ........................155M0431005 ........................155M0441003 ........................155M0441004 ........................155M0441005 ........................155M0451003 ........................156M0451004 ........................156M0451005 ........................156M0471003 ........................152M0471004 ........................152M0471005 ........................152M0490042 ........................162M0490044 ........................162M0490062 ........................162

M0490064 ........................162M0500042 ........................161M0500044 ........................161M0500062 ........................161M0500064 ........................161M0512403 ........................164M0512404 ........................164M0512405 ........................164M0522403 ........................163M0522404 ........................163M0522405 ........................163M0531042 ........................165M0531044 ........................165M0541042 ........................166M0541044 ........................166MA714A-04 .......................85MA714D-02 ......................85MA714D-03 ......................85MP714D-02 .......................86MP714D-03 .......................86MW513800 ........................86

NNI-300 ................................87NI-500 ................................87NI-800 ................................87

PP0120010C ......................196P0120010M .....................196P0120025C ......................196P0120025M .....................196P0120050C ......................196P0120050M .....................196P0120100C ......................196P0120100M .....................196P0120250M .....................196P0130010C ......................196P0130010M .....................196P0130025C ......................196P0130025M .....................196P0130050C ......................196P0130050M .....................196P0130100C ......................196P0130100M .....................196P0130250M .....................196P0140010C ......................197P0140010M .....................197P0140025C ......................197P0140025M .....................197P0140050C ......................197P0140050M .....................197P0140100C ......................197P0140100M .....................197P0150025C ......................197P0150025M .....................197P0150050C ......................197P0150050M .....................197P0150100C ......................197P0150100M .....................197P0150250C ......................197P0150250M .....................197

P0150500C ......................197P0150500M .....................197P0160001 .........................201P0160002 .........................201P0160003 .........................201P0160004 .........................201P0160005 .........................201P0160006 .........................201P0170001 .........................201P0170002 .........................201P0170003 .........................201P0170004 .........................201P0170005 .........................201P0170006 .........................201

RR0007 ...............................187R0008 ...............................187R0010 ...............................187R0013 ...............................187R0014 ...............................187R0107 ...............................187R0108 ...............................187R0110 ...............................187R0112 ...............................187R0116 ...............................187R0121 ...............................187R0212 ...............................187R0217 ...................... 187, 211R0221 ...............................187R0223 ...............................187R0225 ...............................187R0226 ...................... 187, 211R0229 ...................... 187, 211R0331 ...............................187R0339 ...............................187R010607-B .........................84

SS0C350-10 .......................173S0C350-11 .......................173S0C350-20 .......................173S0D100-25 .......................174S0P110-100 ......................186S0P110-120 ......................186S0P110-125 ......................186S0P110-140 ......................186S0P110-150 ......................186S0P110-160 ......................186S0P110-180 ......................186S0P110-200 ......................186S0P110-220 ......................186S0P110-230 ......................186S0P113-210 ......................185S0P114-190 ......................185S0P115-195 ......................185S0P120-150 ......................186S0P120-175 ......................186S0P120-200 ......................186S0P120-230 ......................186S0P125-125 ......................186S0P125-150 ......................186

S0P130-120 ......................186S0P130-140 ......................186S0P130-160 ......................186S0P130-180 ......................186S0P210-210 ......................186S0S300-125 ......................185S0S300-150 ......................185S0S300-160 ......................185S0S300-180 ......................185S0S300-200 ......................185S0S300-210 ......................185S0S300-230 ......................185S0S301-160 ......................185S0T120-15 ........................173S0T200-15 ........................173S0T260-40 ........................174S0T260-65 ........................174S0W200-30 ......................173S0W200-70 ......................173S0W500-25 ......................174S0W500-40 ......................174S025242L .........................203S0101502 ..........................208S0101504 ..........................208S0101506 ..........................208S0111420 ..........................207S0111922 ..........................207S0112425 ..........................207S0112440 ..........................207S0112942 ..........................207S0113445 ..........................207S0120009P .......................206S0120013 ..........................206S0120013P .......................206S0120016 ..........................206S0120016P .......................206S0120019P .......................206S0120022 ..........................206S0120022P .......................206S0120027 ..........................206S0120027P .......................206S0120038 ..........................206S0120038P .......................206S0134250 ..........................202S0134500 ..........................202S0144125 ..........................203S0161530 ..........................208S0161635 ..........................208S0171244 ..........................208S0171444 ..........................208S0234004 ..........................202S0234504 ..........................202S0244004 ..........................202S0244504 ..........................202S0251250 ..........................203S0251500 ..........................203S0254000 ..........................203S0254250 ..........................203S0254500 ..........................203S0259250 ..........................203S0259500 ..........................203S0264250 ..........................203S0264500 ..........................203

S0274125 ..........................203S0280009 ..........................206S0280013 ..........................206S0280016 ..........................206S0280019 ..........................206S0280022 ..........................206S0280027 ..........................206S0280032 ..........................206S0280038 ..........................206S0291018 ..........................205S0291030 ..........................205S0291420 ..........................205S0291922 ..........................205S0292440 ..........................205S0292942 ..........................205S0341750 ..........................209S0342565 ..........................209S0351656 ..........................209S0391420 ..........................205S0391922 ..........................205S0392440 ..........................205S0401018 ..........................205S0401420 ....................86, 205S0401922 ..........................205S0402440 ..........................205S0402942 ..........................205S0403445 ..........................205S0404550 ..........................205S0405550 ..........................205S0411530 ..........................208S0411635 ..........................208S0421530 ..........................208S0450035 ..........................206S0480015 ................. 171, 205S0490025 ..........................214S0490050 ..........................214S0490100 ..........................214S0490350 ..........................214S0520050 ..........................215S0520100 ..........................215S0520250 ..........................215S0520500 ..........................215S0521000 ..........................215S0540004 ..........................218S0540008 ..........................218S0540012 ..........................218S0550004 ..........................218S0550008 ..........................218S0550012 ..........................218S0560004 ..........................218S0560008 ..........................218S0560012 ..........................218S0570004 ..........................219S0570008 ..........................219S0580004 ..........................219S0580008 ..........................219S0600004 ..........................211S0610004 ..........................220S0610008 ..........................220S0610012 ..........................220S0620004 ..........................220S0620008 ..........................220S0620012 ..........................220

S0630004 ..........................220S0630008 ..........................220S0630012 ..........................220S0640004 ..........................221S0640008 ..........................221S0640012 ..........................221S0670004 ..........................221S0670008 ..........................221S0670012 ..........................221S0680004 ..........................221S0680008 ..........................221S0680012 ..........................221S0701240 ..........................209S0701754 ..........................209S0701756 ..........................209S0711240 ..........................210S0711754 ..........................210S0711756 ..........................210S0721240 ..........................210S0721754 ..........................210S0721756 ..........................210S0732510 ..........................211S0732510A .......................211S0732510B .......................211S0734040 ..........................211S0734040A .......................211S0734040B .......................211S0735060 ..........................211S0735060A .......................211S0735060B .......................211S0980128 ..........................204S0980153 ..........................204S0980204 ..........................204S0980255 ..........................204S7520200 ..........................207S7520202 ..........................207S7520220 ..........................207S7520221 ..........................207S7520228 ..........................207S7520229 ..........................207S7520230 ..........................207S7520231 ..........................207S7520252 ..........................207S7520253 ..........................207S7520254 ..........................207S7520255 ..........................207SCS11 ...............................223SCS11-PSP .......................223SW-1316-2222.................189SW-1316-2432.................189SW-1316-2450.................189SW-1619-2222.................189SW-1619-2432.................189SW-1619-2450.................189SW-1922-2222.................189SW-1922-2432.................189SW-1922-2450.................189

TT0A600-150.....................176T0A600-200.....................176T0A600-220.....................176

T0A600-250.....................176T0A600-300.....................176T0A600-350.....................176T0A600-400.....................176T0A600-450.....................176T0A600-500.....................176T0A600-600.....................176T0A800-150.....................176T0A800-200.....................176T0A800-220.....................176T0A800-250.....................176T0A800-300.....................176T0A800-350.....................176T0B400-10 .......................175T0B400-20 .......................175T0B500-10 .......................177T0B500-20 .......................177T0B600-10 .......................176T0B600-20 .......................176T0C100-14 .......................175T0C100-24 .......................175T0C300-08 .......................175T0C300-12 .......................175T0H200-12 ......................175T0H200-17 ......................175T0H200-20 ......................175T0H200-25 ......................175T0H200-30 ......................175T0H200-40 ......................175T0H200-50 ......................175T0J110-125 ......................182T0J110-150 ......................182T0J110-200 ......................182T0J130-125 ......................183T0J130-150 ......................183T0J130-200 ......................183T0T650-10 .......................181T010607-A ...................85, 86T010607-C .........................85T010607-F .........................84T010607-I ..........................84T021607-D ........................83T021607-E .........................83T0100024 .........................214T0110800 .........................217T0111000 .........................217T0120800 .........................217T0121000 .........................217T0230012 ...........................77T0230015 ...........................77T0239012 ...........................77T0239015 ...........................77TH032 ................................35

VV08-2 ................................222V08-2A .............................222V09-2 ................................222V09-2A .............................222V018-10SF .......................224V018-10SR .......................224V018-20SF .......................224

V018-20SR .......................224V020-10FB ......................225V020-10FF .......................225V020-10RB ......................225V020-10RF ......................225V020-20FB ......................225V020-20FF .......................225V020-20RB ......................225V020-20RF ......................225V0163024 .........................215V0163229 .........................215V0164034 .........................215V0164050 .........................215V0165045 .........................215V0165050 .........................215V0165550 .........................215V0175036 .........................213V0175037 .........................213V0175038 .........................213V0175039 .........................213V0180008 .........................217V0200100 .........................215V0200100G ......................215V0210250 .........................216V0210250G ......................216V0210500 .........................216V0210500G ......................216V0211000 .........................216V0211000G ......................216V0325045 .........................213V0381512 .........................214V0391557 .........................214V0415045 .........................213VC011-2 ...........................223VC011-2A ........................223VF-PP-25 .........................133VF-PP-50 .........................133VF-PP-100 .......................133VF-PP-250 .......................133VF-PP-500 .......................133VF-PP-1000 .....................133VS011-2............................223VS011-2A.........................223

WW0998565 ........................226W0998575 ........................226W0998590 ........................226W09985100 .....................226W09985125 .....................226W09985150 .....................226

Documents

Glass Properties · Porosity Catalog Abbreviation Nominal Maximum Pore Size (Microns) ... CRUCIBLE ... GOOCH