Embed Size (px)
Citation preview
1
Gillespie Corporation FOUNDED IN 192334 PINE STREET, P.O. BOX 359 WARE, MA 01082-0359 TEL: 413/967-4980 FAX: 413/967-9534 WEBSITE: www.gillespiecorp.com E-MAIL: [email protected]
COLLAPSING PASSENGER / FREIGHT CAR GATES
For passenger, freight or material lifts, we fabricate each gate individually to your specifications. Construction and materials are of the highest quality, surpassing ANSI/ASME codes. You may select from a number of finishes and colors to make sure your customer has the look they want.
Please see below, call, or e-mail us for more information or visit our website.
GILLESPIE CORPORATION COLLAPSIBLE SCISSOR GATES
To provide a quotation we need the following information (Please see the information below as a reference):
1) Is this a freight or passenger gate?2) Box track or flat track on top?3) Track length (total opening width)?4) Hand of the gate-from in the car. Looking at the gate
from INSIDE the car, does the gate slide to the right orleft when opening?
5) Clear height under the track?6) Does car have a canopy?7) Stainless or primed gate?8) Do you want the swing feature to provide a greater
opening?
Please note: Our gates are guided at the bottom. A track will have to be provided by others on the platform to guide the gate. A groove or ½” by ½” minimum is required.
Please contact us if you have questions.
GILLESPIE CORPORATION
P.O. BOX 359 34 PINE STREET
WARE, MA 01082 TEL: 413-967‐4980 FAX: 413-967‐9534
[email protected] E‐MAIL:
WEBSITE: http://www.GillespieCorp.com
HORIZONTAL COLLAPSING FREIGHT ELEVATOR GATE
TYPICAL 4'-0" x 6'-8" RIGHT HAND FREIGHT GATE SHOWN
[____ ]
CHANNEL
ROLLER
HORIZONTAL COLLAPSING PASSENGER ELEVATOR GATES KNUCKLE TYPE
KNUCKLE TYPE CHANNEL ROLLER
0
TOP TRACK ---
-- GATE -----
GATE HEIGHT CLEAR OPN'G.
CLEAR OPN'G.
l [ ___ _] GATE WIDTH
ru:11:11:n:11:11:n:11:11:11:11. -. -. - . -. - . -. -. - . -. - . -. -. -. - . -. - . -. -. - . lI
LEFT HAND GATE (from inside car)
_[. -. -. - . -. -. - . - . -. - . -. - . - . -. - . -. - . -. - . -. 11:11:11:11:u:11:11:n:11:11:ml I
RIGHT HAND GATE (from inside car)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
l 1 : 7 __ L - _I___ J
GATE FINISH OPTIONS:
BLACK PRIMER FLAT - 0 STAINLESS STEEL 304 - 0 STAINLESS STEEL 316 - 0 POWER COATING - 0OTHERS - 0
GATE REQUIRED: Wx H---- ----
GATE OPENING HAND: GATE TYPE: GATE TOP TRACK:
LEFT HAND - 0 FREIGHT - 0 RIGHT HAND - 0 PASSENGER - 0
GATE GUIDE BAR with KNUCKLE TYPE - 0 GATE CHANNEL with TOP ROLLER - 0
GATE SWITCH: YES O NO 0 GATE RESTRICTOR: YES O NO 0
ORDERING A GATE, PLEASE ADVICE IF A CAR HAS A TOP PANEL: YES 0 NOD
SWING-IN GATES AVAILABLE FOR MORE CLEAR OPENING.
THIS STURDY GATE IS CONSTRUCTED WITH DOUBLE 3/4" CHANNEL UPRIGHT (A36 STEEL),
SPACED ACCORDING TO CODE REQUIREMENTS.
WEBBING CONSTRUCTED OF 1/8"x5/8" CRS, ASSEMBLED WITH SEPARATING WASHERS AND
SPECIAL FITTINGS TO PREVENT RUBBING.
GILLESPIE CORPORATION WARE, MASSACHUSETTS [ 413] 967-4980
JOB NAME
WEIGHT GILLESPIE ELEVATOR GATE
MODEL ENGINEER YM DATE
DWG NO
CHECK
SHEET 1 OF 1
e-mail: [email protected]
HORIZONTAL COLLAPSING FREIGHT ELEVATOR GATE (BOSTWICK SWING TYPE)
TOP ROLLER-SWING GATE
(KNUCKLE/BOSTWICK TYPE)
TOP TRACK
LIFT 8' Sw'ING 14-----++-
HANDLE
CLEAR OPN'G.
SILL
4'-0' x 6'-8' RIGHT HAND CS',/ING IN) FREIGHT GATE SHDVN
SWING IN
LEFT HAND GATE RIGHT HAND GATE
THIS STURDY FREIGHT GATE IS CONSTRUCTED WITH DOUBLE 3/4"
CHANNEL UPRIGHTS , SPACED ACCORDING TO CODE REQUIRMENTS.
WEBBING CONSTRUCTED OF 1/8" x 5/8" CRS , ASSEMBLED WITH SEPARATING WASHERS AND SPECIAL FITTINGS TO PREVENT RUBBING.
GATE FURNISHED IN FLAT BLACK PAINT AND STAINLESS STEEL. OTHER FINISHES UPON REQUEST.
FORMULAS:
CLEAR OPENING WITH GATE SWUNG=PLATFORM WIDTH MINUS 2 1/2". TO CHOOSE GATE, PICK GATE 2" SMALLER THAN PLATFORM. TAKE COLLAPSED WIDTH PLUS 1 1/2" AND DEDUCT FROM PLATFORM WIDTH TO GET NORMAL CLEAR OPENING.
GILLESPIE CORP. WARE, MASS. www.gillespiecorp.com TEL. 413-967-4980 FAX. 413-967-9534
1
Gillespie Corporation FOUNDED IN 1923
34 PINE STREET, P.O. BOX 359 TEL: 413-967-4980 WEBSITE: www.gillespiecorp.com
WARE, MA 01082-0359 FAX: 413-967-9534 E-MAIL: [email protected]
Collapsible Panel Type Car Gate
Some jurisdictions around the country no longer allow the use of collapsible car gates on elevators and lifts.
Below is some information on our collapsible panel car gates.
These gates can be painted or come fabricated in stainless steel
If you have question or need additional information, please contact us.
I II �
C GATE TRACK
I I I I I I I I I I I I I
:t-=='=---=±'==-=''=--=t:"=-='-==-=::lc I I
L..L __________ ___l_J
5 1 / 4 PANEL WIDTH (6) PANELS1
�(mic.6" � mo, s·:
1ITTJill I D j
GATE SWITCH
DOOR HANDLE
GATE
GATE OPENIN 7- == == == == == ==��
u_ ___________ _l_J
(6) PANEL GATE - UP TO 48" WIDE
RIGHT HAND GATE (from inside car)
s 1/4 (10) PANEL GATE - UP TO 75" WIDE(10 PANELSn _PA�EL WIDTH "
( (min.6 - max 8 )
�------------------u1111111111 �
GATE TRACK
L..L __________________ ___l_J
GATE SWITCH
DOOR HANDLE
r ....•
RIGHT HAND GATE (from inside car)
GATE
GATE OPENING
' 1 I I I I I I I I I I I I I I I I I
LL=�----------------� U-=-11 1/4----o-l�
6 3/4 PANEL WIDTH (8) PANELS
�l(mic6" � me, 8°) (8) PANEL GATE - UP TO 60" WIDE
I
r GATE TRACK GATE SWITCH
DOOR HANDLE
( . '
..
GATE
GATE OPENING
:j RIGHT HAND GATE (from inside car)
, '1
�-====================--�7 u_-=_} L..L ______________ ___l_J L..L ______________ ___l_J
GATE OPENING HAND: LEFT HAND - D RIGHT HAND - D
PANEL GAGE: 16 ga - D 14 ga - D
1 1/4----o-l�
GATE SWITCH: YES DGATE RESTRICTOR: YES D
NO D NOD
ORDERING A GATE, PLEASE ADVICE IF CAR HAS A TOP PANEL: YES D NOD
GATE FINISH OPTIONS: BLACK PRIMER FLAT - DSTAINLESS STEEL 304 - DSTAINLESS STEEL 316 - D
GATE REQUIRED: ____ Wx ___ H
POWER COATING - DOTHERS - D
THIS STURDY GATE IS CONSTRUCTED OF STEEL PAN PANELS (UP TO 8" WIDE) WITH PERFORATED METAL VISION PANELS STAINLESS STEEL HINGES.
ASSEMBLED WITH SEPARATING WASHERS, NYLON BEARINGS AND SPECIAL FITTINGS TO ASSURE GATE SMOOTH OPERATION.
GILLESPIE CORPORATION WARE, MASSACHUSETTS [ 413] 967-4980
JOB NAME
WEIGHT GILLESPIE PANEL GATES
MODEL ENGINEER DATE CHECK
DWG NO SHEET 1 OF 2
6 3/4 (8) PANELS
n _PA�EL WIDTH ,,
mm:t::: (mm s ma, s I
DOUBLE (8) PANEL GATE - UP TO 12 FT WIDE
6 3/4 i!(s) PANELS
DD
�------------------------------�
GATE REQUIRED: __ Wx __ H
ORDERING A GATE, PLEASE ADVICE IF A CAR HAS A TOP PANEL: YES D NOD
b-----------1-----------------i------------d
GATE TRACK
(0) (0) (0)
(OJ (OJ (OJ
ADD-ON PLATFORM SILL AVAILABLE
r 0 0 0 0
--------·----------
----
GATE
----
-�GATE SWITCHES
� � I -0- I '1
GATE OPENING
-
�------------------------------� 1 1/4
7
I
GATE FINISH OPTIONS: BLACK PRIMER FLAT - D STAINLESS STEEL 304 - D STAINLESS STEEL 316 - D POWER COATING - D OTHERS - D
PANEL GAGE: 16 ga - D 14 ga - D
THIS STURDY GATE IS CONSTRUCTED OF STEEL PAN PANELS
(UP TO 8" WIDE) WITH PERFORATED METAL VISION PANELS.
STAINLESS STEEL HINGES.
ASSEMBLED WITH SEPARATING WASHERS, NYLON BEARINGS
AND SPECIAL FITTINGS TO ASSURE GATE SMOOTH OPERATION.
GATE SWITCH: YES D NOD GATE RESTRICTOR: YES D NOD
GILLESPIE CORPORATION WARE, MASSftCHUSETTS [ 413] 967-4980
JOB NAME
WEIGHT GILLESPIE PANEL GATES
MODEL ENGINEER DATE CHECK DWG NO SHEET 2 OF 2
