Upload
hoangnguyet
View
271
Download
10
Embed Size (px)
Citation preview
SL 30SELECTRA 30 SLICER
› SL 20 › SL 25› SL 30 › SL 50
GHD Georg Hartmann Maschinenbau GmbH
Schwalbenweg 24D-33129 Delbrück, Germany
Phone: +49 (0) 52 50.98 43-0Fax: +49 (0) 52 50.98 43-33
Web: www.ghd.netE-Mail: [email protected]
GHD HARTMANN internationalRepresented in more than 30 countries – see www.ghd.net
Technical Data
Dimensions: Length: Width: Height:
Product dimensions: Length: Height:
Capacity: approx. 3800 loaves / hour (depending on the product)
Speed Belt cutter: adjustable between 180-400 m / min
Belt cutter length: 176 inches
Controller: Omron
Frequency controller: Hitachi
Pneumatic system: Festo
Power supply: 230/400 Volt / 50 Hz
Power input: 6.5 kW
Compressed air: min. 5.0 bar
Weight: 1600 kg
approx. 3145 mm approx. 1150 mm approx. 2600 mm
160-400 mm 50-180 mm
Fully automated band slicing machine for toast and multi-grain rye breads. The cutting is implemented with band blades that are tensioned using two hardchrome plated drums. The self-supporting warp resistant steel pipe frame ensures the smooth running of the machine. Generously dimensioned doors and hoods allow for easy access for cleaning and maintenance as well as quick blade replacement. Equipment can be delivered as either left-handed or right-handed version.
Hartmann Selectra 30 Slicer
SL 30
Lower oil lubrication unit for multi-grain breads with up to 40% rye content.
Upper oil lubrication unit for multi-grain breads with more than 40% rye content.
Optional: Oil lubrication unitPatented blade oil lubrication without oil mist for applying oil to belt blades with optimal precision and dosage.
Optional:Additional blade guides (slice thickness of 7-20 mm possible)Patented blade oil lubrication withoutoil mistStainless steel versionClean room design Working area up to 550 mm (XL model)
Working area up to 650 mm (XLS model)
Working area up to 750 mm (XXL model) Blades driven with 7.5 kW three-phase motorBlades driven with 11 kW three-phase motorUV lamps for sterilising the band blades
Overview of Selectra SL 30 featuresSelf-supporting suspension of drive drum and reversing drumLow-wear hard chrome plated surfaces of the drums prevent premature wearing of the band bladesPneumatic blade tensioning deviceBlades driven with 5.5 kW three-phase motorProgrammable logic controllerEquipment stops when blade breaksSpeed for product infeed and product outfeed is continuously adjustableProduct infeed consists in upper, lower, and lateral conveyor unitsDrives for adjusting the aperture width of the product infeedAdjustment of cutting geometry +/- 15 degrees possibleIntuitive operation via touch screen
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
Non-binding suggested set-up drawing.
OutfeedSpeed continuously adjustable, can thus be synchronised with bag packing machine.
Blade guidesThe self-supporting drum sus-pension allows for fast refitting and optimum access for maintenance.