GFS - Circular Super Cutter

The Circular Super Cutter with 10 decisive features:

1) Proven drag cutting with slanting blades 2) Cutting forces shared between two

blades

3) Strong and secure blade holder

4) Largely vibration-free cutting

5) Closed and strong cross bar holder

6) Tool holder displacement with precision clamping

7) Jaw adjustment with spindle also possible 8) Strong cutting blade, cross section 7 x 16 mm / 0.275’’ x 0.630’’.

9) 3 blade shapes, for sheet metal, thicker metal and plastics 10) A quality tool that permits high cutting performance and long periods of operation

The outstanding feature of GFS drag cutting is flycutting withangled precutting and follower cutting blades.

Cutting performance: Metals 70 mm - 300 mm / 2.760’’ - 11.810’’ , up to 20 mm / 0.780’’thickness from one sideForward feed max. 0.3 mm/revPlastics 90 mm – 320 mm / 3.540’’ - 12.600’’, up to 60 mm / 2.360’’thickness from one side

Flycutting with angled (dragged) blades and the total cut shared between 2 blades(precutting and follower blades) makes cutting especially trouble- and vibration-free,with a cutting depth in metals of 20 mm / 0.780’’ from one side. Thin sheet metal of0.3 mm / 0.012’’ to about 2 mm / 0.080’’ thickness, on the other hand, is handled byjust a single special blade. Plastics can be cut from one side with a straight blade up toa depth of 60 mm / 2.360’’.

GFS - Circular Super Cutter

2 Models :

Super 100 : Diameter changes by Super 200 : Tool holders displaced with threadedsimply displacing the tool holders spindles with a scale for fine adjustment

3 cutting ranges on the Super 100 thanks to cross bars of different lengths.

Metals 70 - 300 mm ∅2.750’’ - 11.800’’

Plastics 90 - 320 mm ∅3.540’’ - 12.600’’

Metals 70 - 200 mm ∅2.750’’ - 7.870’’

Plastics 90 - 220 mm ∅3.540’’ - 8.660’’

Metals 70 - 130 mm ∅2.750’’ - 5.120’’

Plastics 90 - 150 mm ∅3.540’’ - 5.900’’

Circular-Super-Kreisschneider Circular Super CutterTagliadischi Circolare Super Fraise trépaneuse Circular Super

Kreisschneider Circular kpl. Circular cutter completeTagliadischi circolare completo Fraise trépaneuse Circular complet

Artikel ∅∅∅∅ Bereich - ∅∅∅∅ Range Art.No.Super 100, MK 3 (MT3) 70 - 130 1013003Super 100, MK 4 (MT4) 70 - 130 1013004Super 100, MK 4 (MT4) 70 - 200 1013006Super 100, MK 4 (MT4) 70 - 300 1013008Super 100, MK 5 (MT5) 70 - 130 1013005Super 100, MK 5 (MT5) 70 - 200 1013007Super 100, MK 5 (MT5) 70 - 300 1013009Super 200, MK 4 (MT4) 70 - 300 1014004Super 200, MK 5 (MT5) 70 - 300 1014005

Mittelstücke kpl.m. Zentrierbohrer Centerpieces incl. Center drillElemento centrale completo con punta da centri Pièce intermédiaire complet, avec foret de centrage

Größe - Size - Misura - Dimension Art.No.Super 100 MK 3 1013013Super 100 MK 4 1013014Super 100 MK 5 1013015Super 200 MK 4 1014014Super 200 MK 5 1014015

Querstange - Crosspiece - Barra trasversale - Traverse

Größe - Size - Misura - Dimension ∅∅∅∅ Bereich - ∅∅∅∅ Range Art.No.Super 100 70-130 mm 1013020Super 100 70-200 mm 1013021Super 100 70-300 mm 1013022Super 200 1014020

Stahlhalter - Toolholder - Supporto - Porte-outilGröße - Size - Misura - Dimension Art.No.Super 100 1013040Super 200 1014040

Zentrierbohrer - Center drill - Punta da centri - Foret de centrageNo. 1209, kurz - short - corto - court 1013030No. 1210, lang - long - longo - long 1013031

Circular-Super-Kreisschneider Circular Super CutterTagliadischi circolare super Fraise trépaneuse Circular Super

Artikel Art. No.Mittleres Führungsstück - Center bushGuida centrale - Pièce intermédiaire de guidage 1014042

Kupplung f. beide Spindeln - Coupler f. both spindlesAccoppiamento per due mandrini - Couplage pour les deux broches 1014050

Spindel links- Spindle leftMandrino sinistro - Broche de gauche 1014060

Spindel rechts - Spindle rightMandrino destro - Broche de droite 1014061

Messer - Blades - Coltelli - Couteaux

Artikel Art. No.No.1201 HSS/E 2013201Vorschneider / Pre cutter / Maschio di sbozzatura / Couteau ébaucheur

No.1202 HSS/E 2013202Nachschneider / Finisher / Maschio di rifinitura / Couteau de finition

No.1203 HM 2013203Vorschneider / Pre cutter / Maschio di sbozzatura / Couteau ébaucheur

No.1204 HM 2013204Nachschneider / Finisher / Maschio di rifinitura / Couteau de finition

No.1205 HSS/E 2013205Schneidmesser / Cutter / Coltello / Couteau

No.1206 HM 2013206Schneidmesser / Cutter / Coltello / Couteau

No.1207 HM 2013207Schneidmesser f. Kunststoffe bis 35 mm SchnittiefeCutter for plastics up to 35 mm cutting depthColtello per materiali sintetici con profondità di passata fino a 35 mmCouteau pour matières synthétiques jusqu'à 35 mm de profondeur de coupe

No.1208 HM 2013208Schneidmesser f. Kunststoffe bis 60 mm Schnittiefe Cutter f. plastics up to 60 mm cutting depth Coltello per materiali sintetici con profondità di passata fino a 60 mmCouteau pour matières synthétiques jusqu'à 60 mm de profondeur de coupe

Circular Super Cutter

Blade 1201, HSSMetal up to 20 mm ( 0.800 “) thicknessPre cutter, Clamping in angular recess

Blade 1202, HSSMetal up to 20 mm ( 0.800 “) thickness

Finisher, Clamping in angular recess

Blade 1203, CarbideMetal up to 20 mm ( 0.800 “) thickness

Pre cutter, Clamping in angular recess

Blade 1204, CarbideMetal up to 20 mm ( 0.800 “) thickness

Finisher, Clamping in angular recess

Blade 1205, HSSSheet metal from 0,3 to 2 mm ( 0.012 “ to 0.080 “) thickness

Only one blade needed, Clamping in angular recess

Blade 1206, CarbideSheet metal from 0,3 to 2 mm ( 0.012 “ to 0.080 “) thickness

Only one blade needed, Clamping in angular recess

Blade 1207, CarbidePlastics and laminates up to 35 mm ( 1.380 “ ) thickness

Only one blade needed Clamping in straight recess

Blade 1208, CarbidePlastics and laminates up

to 50 mm ( 1.970 “ ) thicknessOnly one blade needed

Clamping in straight recess