+GF+ SIGNET PRODUCTS - Fabco Plastics€¦ · +GF+ SIGNET PRODUCTS ... SENSOR-POWERED FLOW MONITOR • Displays GPM • No powered required • Single input ... • CPVC, PVC •

10

2

1

www.fabcoplastics.com 5-7

9

6

7

5

3

4

8

TYPE 8900 MULTI-PARAMETER/MULTI-CHANNEL CONTROLLER

• AC or DC power option• Up to 6 sensor inputs (2

frequency inputs max)• Up to 4 current outputs• Up to 8 relays• Use with all digital (S3L)

sensors• CE, UL, RoHS, China RoHS

TYPE 9900 SMARTPRO™ TRANSMITTER

• Multi-Parameter input selection

• Large auto-sensing backlit display

• “Dial-type” digital bar graph• Optional field upgradable

relays• Selectable error mode for

current outputs, 3.6 mA or 22 mA

• Warning LED indicator• Custom 13-character label

capabilities for the channel type

• CE, UL, RoHS, China RoHS

+GF+ SIGNET PRODUCTS

+GF+ Signet Multi-Parameter Instruments

+GF+ Signet Chlorine Analyser and TurbidimeterTYPE 4630

CHLORINE ANALYSER SYSTEM• Continuous free chlorine

measurement without chemical reagents

• Optional pH sensor input for increased accuracy

• Pre-wired panel for easy installation

• 2 analogue outputs• 2 mechanical relays• Built in pressure regulator

and variable area flow indicator

• CE, UL, CUL, China RoHS

TYPE 4150TURBIDIMETER

• Compliant with U.S. EPA 180.1 or ISO 7027

• Two adjustable alarm relays• Built-in pressure regulator• Easy access for wiring and

maintenance• Optional auto cleaning for

reduced maintenance• Inexpensive standards

allow for multiple system calibration

• CE, China RoHS, ETL, cETL

10

1

2

5-8 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

9

6

7

5

3

4

8

TYPE 2540 STAINLESS STEELPADDLEWHEEL FLOW SENSOR

• 0.1 to 6 m/s (0.3 to 20 ft/s)

• DN40 DN900 (1½ to 36 in)• 316 Stainless Steel• 17 bar @ 100 °C (250 psi

@ 212 °F)• 49 Hz per m/s nominal (15

Hz per ft/s nominal)• Open Collector output• CE, RoHS, China RoHS

TYPE 2537PADDLEWHEEL FLOW SENSOR

• 0.1 to 6 m/s (0.3-20 ft/s)• DN15 to DN200 (1/2-8 in)• PP or PVDF• PP 12.5 bar @ 20 °C (181

psi @ 68 °F)• PVDF 14 bar @ 20 °C (203

psi @ 68 °F)• 4 to 20 mA, digital (S³L),

flow switch or pulse outputs (based on part number)

• Use with +GF+ tee, saddle, wafer or weldolet fitting

• CE, UL, RoHS, China RoHS, NEMA 4X/IP 65

FLOW SENSORS & INSTRUMENTS

+GF+ Signet Flow Sensors and Instruments

TYPE 2551MAGMETER (WITH DISPLAY)

• 0.05 to 10 m/s (0.15 to 33 ft/s)

• DN15 to DN900 (1/2 to 36 in)

• PP or PVDF• 10.3 bar @ 25 °C (150 psi

@ 77 °F)• 4 to 20 mA, frequency/

digital (S³L) outputs• Optional relay outputs• Use with +GF+ tee, saddle,

wafer or weldolet fitting• CE, UL, CUL, RoHS, China

RoHS, NEMA 4X/IP 65

TYPE 2551MAGMETER (BLIND)

• 0.05 to 10 m/s (0.15 to 33 ft/s)

• DN15 to DN900 (1/2 to 36 in)

• PP or PVDF• 10.3 bar @ 25 °C (150 psi


digital (S³L)• Use with +GF+ tee, saddle,

wafer or weldolet fitting• CE, UL, CUL, RoHS, China

RoHS, NEMA 4X/IP 65

TYPE 515ROTOR-X PADDLEWHEEL FLOW SENSOR

• 0.3 to 6 m/s (1-20 ft/s)• DN15 to DN900 (1/2-36 in)• PP or PVDF• PP 12.5 bar @ 20 °C (180

psi @ 68°F)• PVDF 14 bar @ 20 °C (203

psi @ 68°F)• 19.7 Hz per m/s nominal (6

Hz per ft/s nominal)• Use with +GF+ tee, saddle,

wafer or weldolet fitting• AC Frequency output• FM, RoHS, China RoHS

TYPE 2536ROTOR-X PADDLEWHEEL FLOW SENSOR

• 0.1 to 6 m/s (0.3-20 ft/s)• DN15 to DN900 (1/2-36 in)• PP or PVDF• PP 12.5 bar @ 20 °C (180

psi @ 68 °F)• PVDF 14 bar @ 20 °C (200

psi @ 68 °F)• 49 Hz per m/s nominal (15

Hz per ft/s nominal)• Use with +GF+ tee, saddle,

wafer or weldolet fitting• Open Collector output• CE, RoHS, China RoHS

10

2

1


9

6

7

5

3

4

8

TYPE 2507MINI-FLOW ROTOR SENSOR

• 400 to 12,000 mL/m (0.1 to 3.2 U.S. gpm)

• G 1/4 in ports, 1/4 in NPT pipe adapters

• PVDF• 5.5 bar @ 24 °C (80 psi @

75 °F)• Open Collector output• CE, RoHS, China RoHS

TYPE 2552 METAL MAGMETER• 0.05 to 10 m/s (0.15 to 33

ft/s)• DN50 to DN2550 (2 to 102

in)• 316 Stainless Steel & PVDF• 20.7 bar @ 25 °C (300 psi


digital (S³L)• Hot-tap using ball or gate

valves• Use with 1¼ or 1½ Waga

saddle, weldolets or service saddles

• CE, RoHS, China RoHS, NEMA 6P/IP68

TYPE 2100TURBINE FLOW SENSOR

• 0.38 to 38 lpm (0.8 to 38 gpm)

• DN15 (1/2 in)• PVDF• 16 bar @ 20 °C (232 psi @

68 °F)• Open Collector output• Use with +GF+ End Fitting:

3-2100-31 to 3-2100-38• CE, RoHS, China RoHS

TYPE 2000MICRO-FLOW ROTOR SENSOR

• 0.11 to 12.11 lpm (0.03 to 3.2 gpm)

• 1/4 in NPT or ISO 7/1-R1/4 threads

• Polyphenylene Sulphide and PEEK

• 5.5 bar @ 0° to 80 °C (80 psi @ 32 °F to 176 °F)

• Open Collector output


TYPE 3519FLOW WET-TAP VALVE

• DN15 to DN900 (1/2 to 36 in)

• PVC• 7 bar @ 20 °C (100 psi

max @ 68 °F)• Use with Wet-Tap

Paddlewheel Flow Sensors Type 515 and 2536

• CE

TYPE 525 METALEX PADDLEWHEEL FLOW SENSOR

• 0.5 to 6 m/s (1.6 to 20 ft/s)

• DN15 to DN300 (1/2 to 12 in.)

• 316 Stainless Steel• 103 bar (1500 psi @ safety

factor 1.5) @ 149 °C (300 °F)

• 39 Hz per m/s nominal (12 Hz per ft/s nominal)

• Use with socket weld mini-tap or weld-on mini-tap

• AC Frequency output• FM, RoHS, China RoHS

TYPE 5075 PROPOINT® TOTALISING FLOW MONITOR

• Displays GPS, GPM, GPH, GPD, LPS, LPM, LPH, LPD

• 12 to 24 volts AC or DC• Single input• 1 Open Collector output• 1 active current output• Panel mount• Analogue and digital display• Use with all flow sensors

with frequency outputs• CE, UL, CUL, China RoHS

TYPE 5090 PROPOINT® SENSOR-POWERED FLOW MONITOR

• Displays GPM• No powered required• Single input• Panel mount• Analogue dial for indication• Use with 515• FM, UL, CUL, China RoHS

10

1

2


9

6

7

5

3

4

8

TYPE 5500 PROPOINT® FLOW MONITOR


• 12 to 24 volts AC or DC• Single Input• 1 Open Collector and 2

relay outputs• 1 active current output• Panel mount• Analogue and digital display• Use with all flow sensors


TYPE 8550FLOW INTEGRAL MOUNT


• 12 to 24 VDC• 4 to 20 mA output• For use with 8510, 8512• Various tees, saddles and

weldolet fittings• CE, UL, CUL, RoHS, China

RoHS

TYPE 8550FLOW TRANSMITTER


• 12 to 24 VDC• Up to 2 sensor inputs• Up to 2 Open Collector or 2

input versions• Up to 2 passive current

outputs• Panel or field mount• Delta flow (for 2 channel

versions only)• All flow sensors with

frequency outputs• CE, UL, CUL, RoHS, China

RoHS


TYPE 8150BATTERY POWERED FLOW TOTALISER


• Battery powered• Single input• Panel or field mount• 3 totalisers, auto calibration• Use with 515, 8510• CE, UL, CUL, RoHS, China

RoHS

TYPE 5500 PROPOINT® FLOW MONITOR


• 12 to 24 volts AC or DC• Single Input• Up to 2 Open Collector

output and 2 relay outputs• 1 active current output• Panel mount• Analogue and digital display• Use with all flow sensors


10

2

1


9

6

7

5

3

4

8

TYPE 2764-2767 DRYLOC®

DIFFERENTIAL PH/ORP ELECTRODES• 0-14 pH, ±2000 mV ORP• Ryton body, PTFE junction• Use sensor 1 inch threads for

mounting• DryLoc preamplifier

connection with gold plated pins

• For use with 2750/2760 preamplifiers

• For aggressive applications with Sulfides, high concentration of oxidisers, and heavy metals.

• Differential reference technology; rebuildable

TYPE 3719 PH/ORP WET-TAP ASSEMBLY• Use a wet-tap style sensor;

for 0-14 pH, ±2000 mV ORP• CPVC, PVC• 1/2 inch or larger• 1/2 or 2 inch NPT; ISO 7/1-

R1.5 or R2• Electrode removal without

process shutdown• Double O-ring seal to isolate

process during electrode retraction

+GF+ Signet pH/ORP Sensors and InstrumentsTYPE 2724-2726 DRYLOC®

PH AND ORP ELECTRODES• 0-14 pH, ±2000 mV ORP• Ryton body, PE junction• Use Signet fittings for in-line

applications or 3/4 inch NPT or ISO

• Suitable for submersible applications

• DryLoc preamplifier connection with gold plated pins


• General purpose use• Mounts at any angle

TYPE 2774-2777 DRYLOC®

THREADED PH/ORP ELECTRODES• 0-14 pH, ±2000 mV ORP• Ryton body, PTFE junction• Use sensor 3/4 inch threads

for mounting• DryLoc preamplifier

connection with gold plated pins


• For aggressive applications• Mounts at any angle

PH/ORP SENSORS & INSTRUMENTS

TYPE 2750 DRYLOC®

PH/ORP SENSOR ELECTRONICS• 0-14 pH, ±2000 mV ORP• PBT, CPVC (PVC-C)• DryLoc connection with gold

plated pins• 4 to 20 mA or digital (S3L)• Use with Signet 8900/PLC• In-line and submersible

versions available• Automatic buffer recognition

for 3-2750-2 only• CE, RoHS, China RoHS

TYPE 2760 DRYLOC® PH/ORP PREAMPLIFIERS AND CONNECTORS

• 0-14 pH, ±2000 mV ORP• PBT, CPVC (PVC-C)• DryLoc connection with gold

plated pins• Millivolt signal• Use with Signet 5700/8750• In-line and submersible

versions available• CE, RoHS, China RoHS

5700 PROPOINT® PH/ORP MONITOR• Displays pH or ORP (mV)• 12 to 24 volts AC or DC• Single input• 2 relay outputs• 1 active current output• Panel mount• Analogue and digital display• Use with 2714, 2724, 2764

and 2774 series electrodes• CE, UL, CUL, China RoHS

TYPE 8750 PH/ORP TRANSMITTER• Displays pH or ORP (mV)• 12 to 24 VDC• Single channel input• Up to 2 Open Collector or

relay outputs• Up to 2 passive current

outputs• Panel or field mount• EasyCal function• Use with 2714, 2724, 2764,

2774 series electrodes• CE, UL, CUL, RoHS, China

RoHS

10

1

2


9

6

7

5

3

4

8 TYPE 8850 CONDUCTIVITY TRANSMITTER• Displays μS, mS, KΩ, MΩ,

PPM• 12 to 24 VDC• Single channel input• Up to 2 Open Collector

outputs or dry-contact relays• Up to 2 passive current

outputs• Panel or field mount• Temperature compensation• For use with 2819 and 2839

series electrodes• CE, UL, CUL, RoHS, China

RoHS

TYPE 8860 DUAL-CHANNELCONDUCTIVITY CONTROLLER

• Displays μS, mS, KΩ, MΩ, PPM

• AC or DC supply• Up to 2 sensor inputs• Up to 2 Open Collector and 4

relay outputs• Up to 3 active current

outputs• Panel mount• % reject, % recovery, and

ratio functions• 2819 and 2839 series

electrodes• CE, UL, CUL, RoHS, China

RoHS

TYPE 2818-2823 CONDUCTIVITY/RESISTIVITY ELECTRODES

• 0.055 to 400,000 μS (0.02 to 200,000 ppm) (18.2 MΩ to 1 KΩ)

• 316 SS or Titanium (Hastelloy-C also available upon request)

• Reversible threads or sanitary flange connections

• Connection to Signet Conductivity/Resistivity instruments or 2850 sensor electronics

• NIST traceable certificates for USP requirements

• RoHS, China RoHS

TYPE 2839-2842 CONDUCTIVITY ELECTRODES

• 0.055 to 400,000 μS (0.02 to 200,000ppm) (18.2MΩ to 1KΩ)

• 316 SS and PEEK• Dual threaded NPT or ISO• Connection to Signet

Conductivity/Resistivity instruments or 2850 sensor electronics

• Short insertion depth for small size fittings

• RoHS, China RoHS

TYPE 2850 DRYLOC®

CONDUCTIVITY SENSOR ELECTRONICS• 0.055 to 400,000 μS (0.02

to 200,000ppm)(18.2MΩ to 1 KΩ)

• PBT or CPVC• Integral systems connect to

the 2839 series electrodes or 2819 via special order

• 4 to 20 mA or digital (S3L)• Single and dual channel

remote mount versions available

• CE, RoHS, China RoHS

TYPE 5800CR PROPOINT®

CONDUCTIVITY MONITOR• Displays μS, mS, KΩ,

MΩ,PPM• 12 to 24 volts AC or DC• Single input• Up to 2 relay outputs• 1 active current output• Panel mount• Analogue and digital display• Use with all Signet

conductivity electrodes• CE, UL, CUL, China RoHS

TYPE 5900 PROPOINT®

SALINITY MONITOR• Displays ppm• 12 to 24 volts AC or DC• Single input• Up to 2 relay outputs• 1 active current output• Panel mount• Analogue and digital display• For use with 2822, 2823,

2842 electrodes• CE, UL, CUL, China RoHS

TYPE 8850 CONDUCTIVITY SYSTEM• Displays μS, mS, KΩ, MΩ,

PPM• Dual 4 to 20 mA output

for both temperature and process signal

• Relay/open collector option• For use with 2839-2842 or

2819 via special order• 4-wire power• Standard 3/4 inch NPT/ISO

fittings (customer supplied)• CE, UL, CUL, RoHS, China

RoHS

CONDUCTIVITY INSTRUMENTS

+GF+ Signet Conductivity/Resistivity Instruments

10

2

1


9

6

7

5

3

4

8

+GF+ Signet Level Sensors and InstrumentsTYPE 2250 LEVEL SENSOR

This instrument is used to:• 0 to 10 psi = 0 to 7.03m = 0

to 23.06ft• 0 to 50 psi = 0 to 35.15m =

0 to 115.32ft• Wetted Material: PVDF, PVC,

ceramic• Submersible sensor• 4 to 20 mA or digital (S3L)• Uses hydrostatic pressure for

level and depth control• Use with Signet 8250 level

transmitter or connect to PLC, etc. using the 4 to 20 mA output


TYPE 8250 LEVEL TRANSMITTER• Displays m, cm, ft, in, lbs,

kg/m3, cm3, ft3• 12 to 24 VDC• Up to 2 sensor inputs• 4 relay (2 internal, 2

external)• Up to 2 passive current

outputs• Panel or field mount• Specific gravity entry and

custom volume points• Use with 2250, 2450• CE, UL, CUL, RoHS, China

RoHS

TYPE 8350 TEMPERATURE INTEGRAL SYSTEM

• ProcessPro® instrument with 2350 sensor

• Provides 4-20 mA output• Relay or open collector

options available• 2 or 4 wire power option• Displays °C, °F• Standard 3/4 inch NPT


RoHS

TYPE 8350 TEMPERATURE TRANSMITTER• °C or °F• 12 to 24 VDC• Up to 2 sensor inputs• Up to 2 Open Collector or


outputs• Panel or field mount• Delta temperature (for

2-channel versions only)• Use with 2350• CE, UL, CUL, RoHS, China

RoHS

TYPE 2350 TEMPERATURE SENSOR• 10°C -100°C (14°F-212°F)• PVDF• 3/4 inch dual threaded

for in-line or submersible installation

• 4 to 20 mA or digital (S3L)• Use with Signet 8350

temperature transmitter or connect to PLC, etc. using the 4 to 20 mA output


+GF+ Signet Temperature Instruments

LEVEL & TEMPERATURE PRODUCTS

10

1

2


9

6

7

5

3

4

8

+GF+ SIGNET PRESSURE PRODUCTS

+GF+ Signet Pressure Sensors and Instruments

TYPE 8450 PRESSURE INTEGRAL SYSTEM

• ProcessPro® instrument with 2450 sensor

• Provides 4 to 20 mA output• Relay or open collector

options available• 2 or 4 wire power option• Displays psi, kPa, bar• Standard 3/4 inch NPT


RoHS

TYPE 8450 PRESSURE TRANSMITTER• Displays psi, bar or kPa• 12 to 24 VDC• Up to 2 sensor inputs• Up to 2 Open Collector or


outputs• Panel or field mount• Delta temperature (for

2-channel versions only)• Use with 2450• CE, UL, CUL, RoHS, China

RoHS

TYPE 2450 PRESSURE SENSOR• 3 ranges: -0.1 to 0.7 bar

(-1.5 to 10 psi) - U, -0.4 to 3.4 bar (-6.0 to 50 psi) - L, -0.96 to 17.2 bar (-14.6 to 250 psi) - H

• PVDF, ceramic• 3/4 inch - L and H• 1/2 inch union, dual thread• 4 to 20 mA or digital (S3L)• Use with Signet 8450

pressure transmitter or connect to PLC, etc.


MONTREAL BRANCH

10

2

1


9

6

7

5

3

4

8

TYPE 7300 SWITCHING POWER SUPPLIES

• Regulated 24 VDC output• DIN or surface mount• Universal AC input• Five output capacities• Fused input• Finger safe terminals• CE, UL, CUL

+GF+ Signet Other Products

TYPE 0251PC COMM CONFIGURATION TOOL

• User friendly interface• Configure settings such as

instrument type, units and modify labels

• Back up and restore 9900 Transmitter configurations to a computer

• Use a single file to clone multiple 9900 Transmitters

• Red and blue LED indicators for data and power


TYPE 6400 INTRINSIC SAFETY BARRIER

• One step, snap-on 35 mm DIN rail mounting and grounding

• Replaceable 160 mA fuse• Compatible with 515 and

525• FM, UL, CSA

+GF+ SIGNET OTHER PRODUCTS

TYPE 0250 USB TO DIGITAL (S³L)CONFIGURATION/DIAGNOSTIC TOOL

• User friendly interface• Multi-language menus• Configure all modifiable

parameters in the sensor• Monitor/graph sensor data

or log sensor data to a file• Monitor mV readings in pH/

ORP sensors to monitor drift


TYPE 2759PH/ORP SYSTEM TESTER

• Battery powered• Simulates pH and ORP• Compatible with 2750 and

2760 preamp• Connects to any Signet pH/

ORP instrument

TYPE 2830/2850-101-XCONDUCTIVITY/RESISTIVITY TOOLS

• Simulates 5 different values• Verifies electronic

independent of electrode• Compatible with all Signet

conductivity/resistivity instruments

TYPE 8058I-GO SIGNAL CONVERTER

• Connects third party 4 to 20 mA signals to the 8900 and 9900

• Up to two 4 to 20 mA sensor inputs

• Requires special programming for use with the 8250, 8350, 8450

• Compatible with 8250, 8350, 8450, 8900, 9900

• CE, China RoHS

TYPE 8059EXTERNAL RELAY MODULES

• AC and DC powered versions

• External relays controlled by host

• 8250, 8900• CE, UL, CUL, China RoHS

10

1

2


9

6

7

5

3

4

8

SADDLE MATERIAL SIZES - DN

PVC Clamp-On 2.0-8.0in SCH 80

Fibreglass Glue-On 3.0-12.0in SCH 80

PVC Glue-On 10.0 and 12.0in SCH 80

PVC BSP Clamp-On 3.0-6.0in SCH 80

PVC-U metric Clamp-On DN65-DN200

INSTALLATION FITTINGS

+GF+ Signet Installation FittingsPLASTIC TEES MATERIAL SIZES - DN

PVC 0.5-4.0in SCH 80

PVC-C 0.50-2.0in SCH 80

*PVC BSP 0.5-2.0in

Fibreglass 1.5-2.0in SCH 80

*ABS metric DN20-DN50

PVC metric DN15-DN50

PP metric DN15-DN50

PVDF metric DN15-DN50

COOL-FIT DN20-DN50

METAL TEES MATERIAL SIZES - DN

Carbon Steel NPT 0.50-2.0in SCH 40

Copper Sweat-On 0.50-2.0in SCH K

Galvanized Iron NPT 1.0-2.0in SCH 40

316 SS NPT 0.50-2.00in SCH 40

Brass NPT 1.0-2.0in SCH 40

METAL TEES MATERIAL SIZES - DN

SS Socket 0.50in - 1.00in

SS Weld-on 1.25in - 12in

METRIC WAFER FITTING MATERIAL SIZES - DN

PP DN65 to DN300 (2.5 to 12.0in)

PDVF DN65 to DN200(2.5 to 8.0in)

SADDLE MATERIAL SIZES - DN

Iron Strap-On 2.0-12.0in SCH 80

316 SS Metalex Strap-On

2.0-12.0in SCH 80

Iron Multi/Saddle 1.25-1.50in SCH 80

WELDOLETS/BRAZOLETS MATERIAL SIZES - DN

Carbon Steel 2.5-12.0in SCH 40

Brass 2.5-12.0in SCH 40

316 SS 2.5-12.0in SCH 40

METRIC WAFER FITTING MATERIAL SIZES - DN

PE 2.0-12.0in

Note: *BSP and ABS fittings are available through your local FABCO sales office.

Documents

+GF+ SIGNET PRODUCTS - Fabco Plastics€¦ · +GF+ SIGNET PRODUCTS ... SENSOR-POWERED FLOW MONITOR • Displays GPM • No powered required • Single input ... • CPVC, PVC •