GeoSurveyor Mobile Bluetooth Connection to S320 · 89. Device: Internal nL400 Microhard 90. Message Type: RTCM v3.0 91. Select/tap the green check mark to continue, 92. Configuring

S320 Bluetooth Connect to GeoSurveyor Mobile Page 1 of 19 PN 874-0302-000 Rev: Mar 5, 2014

GeoSurveyor Mobile Bluetooth Connection to S320 Part Number 874-0302-000 Revised: March 5, 2014

Overview This document describes how to establish and retain a Bluetooth connection between GeoSurveyor Mobile, (SurvCE) software on the XF2 data collector and the S320 GNSS receiver. These instructions are also valid for the older XF1 data collectors running the SurvCE software and other Windows Mobile 6.5 Professional data collectors.

Procedure

Screenshot or Graphic Step

1. To create a Bluetooth connection between GeoSurveyor Mobile SW and the S320 GNSS Base receiver, turn on the S320 GNSS receiver, turn on the XF2 data collector, start the GeoSurveyor Mobile, (SurvCE) SW.

2. The S320 GNSS receiver has two internal Class 2 Bluetooth modules.

3. The S320 GNSS receiver and the XF2 data collector must be within +/- 30 feet of each other to establish and maintain a Bluetooth connection.

4. Hemisphere GNSS GeoSurveyor Mobile start up-splash-logo screen.



5. File > 1 Job menu,

6. Select/Tap Continue Last Job

7. Loading Job…

8. Job Settings > System menu,

9. Current Distance units are displayed,

10. Current Projection / Coordinate System is displayed.

11. Job Settings > System menu,

12. If necessary, select/tap

[Edit Projection List] menu bar, select appropriate Coordinate System for the current Job.



13. Job Settings > New Job,

14. Job Settings > Format menu,

15. Select Coordinate Display Order: and other display settings as needed,

16. Job Settings > Options menu,

17. Select Options as needed,

18. Job Settings > Stake,

19. Select options as needed,



20. Job Settings > Loading selected options,

21. Equip > 2 GPS Base menu,

22. GPS Base | Current menu,

23. Manufacturer: Hemisphere GNSS

24. Model: S320

25. GPS Base | Comms menu,

26. Type: Bluetooth

27. BT Type: Windows Mobile

28. Device: [ ]

29. Select/tap the Tool Menu icon button,



30. Bluetooth Devices menu,

Select Base BT Device,

31. Select/tap [ Find Device ] button-bar,

32. Looking for BT devices…

33. Make sure your S320 GNSS Base receiver is powered ON and within range, +/- 30 feet.

34. Looking for BT devices

35. Name: HGPS S320 186xxxx

36. Note: when you initiate the Bluetooth search, the actual Serial Number of your S320 GNSS receiver found will be displayed here.

37. Bluetooth Devices

Please select from these available devices,

38. Several Bluetooth devices were located, select the actual serial number of your HGPS S320 186xxxx




Please select from these available devices,

40. Select HGPS S320 186xxxx,

41. Select/tap the green check mark to continue,

42. Multiple Bluetooth ports found,

Please select which Bluetooth port to use,

43. Select the option, Any Available Port

44. Select/tap the green check mark to continue

45. Multiple Bluetooth ports found menu,

46. Select Any Available Port


48. Bluetooth Devices | Select Base BT Device menu,

49. Select HGPS S320 186xxxx

50. Select/tap [ Set Device Pin ] button-bar,



51. Configure BT Device PIN,

52. Using the data collector stylus, tap into the Enter BT Device PIN: template,

53. Enter Data menu,

54. Using the data collector stylus, tap into the dialog template, the virtual keyboard will pop open, manually enter 4-zeros, 0000,

55. Configure BT Device PIN:

56. Enter BT Device’s PIN: 0000



59. Select Base BT Device menu,

60. Receiver Name: HGPS S320 186xxxx

61. Select/tap [ Set Device Name ] button- bar,



62. Name: menu

63. Name: HGPS S320 186xxxx,

64. Enter data menu,

65. Using the data collector stylus, select/tap into the dialog template, the virtual keyboard will pop open, HGPS S320 186xxxx is displayed,

66. Name:

67. Name template > manually rename the BT Device Name to HGPS 186xxxx BAS

68. Add the Suffix BAS

69. Renaming the Base BT Device adding BAS suffix, will help remind the user which S320 Serial number is being deployed as the RTK Base receiver.


71. Select Base BT Device menu,

72. Select the Receiver Name: S320 186xxxx BAS

73. Select/Tap the Bluetooth icon,




75. Bonding with Bluetooth…

76. GPS Base > Receiver menu,

77. Select the HEMS320 Antenna model,

78. Measure and enter the S320 RTK Base Antenna height, select the appropriate Antenna measurement, ( ) Vertical or ( •) Slant

79. If using conventional survey tripod & Tribrach > Select (•) Slant

80. DGPS Type: None

81. Select/tap the Antenna details icon to reveal the selected GNSS antenna properties,

82. The Radius, SHMP, (Slant Height Measurement Point), L1 Offset and L2 Offset values are displayed,


84. GPS Base menu > Receiver menu,

85. Select the HEMS320 antenna model

86. Measure and enter the S320 Antenna Height,

87. DGPS Type: None



88. GPS Base > RTK menu,

89. Device: Internal nL400 Microhard

90. Message Type: RTCM v3.0


92. Configuring base…

93. Configuring base,

Selecting Modem/Radio…

94. Base Configuration

95. From New Position menu,

This completes the required steps to create the Bluetooth connection between the data collector and the S320 Base, Select/tap the red X to exit.

The next step, create the Bluetooth connection between the data collector and the S320 RTK Rover.



96. Equip > 3 GPS Rover,

97. GPS Rover > Current menu,

98. Manufacturer: Hemisphere GNSS

99. Model: S320,

100. GPS Rover > Comms

101. Type: Bluetooth

102. BT Type: Windows Mobile

103. Select/tap the Tools menu icon,


Select Rover BT Device,

105. Select/tap [Find Device ]

button-bar,




Looking for BT devices…

Looking for Bluetooth devices.

107. Looking for Bluetooth devices…

108. Name: HGPS S320 186xxxx

found,


Please select from these available devices


Please select from these available devices

111. Select your HGPS S320 186xxxx

serial number,




Select Rover BT Device

HGPS S320 186xxxx

113. Select/tap [Set Device Pin ]

Button-bar,

114. Configure BT Device’s PIN

115. Using the data collector stylus

Tap into the blank template [ ],

116. Enter data

117. The virtual keyboard will pop

Open, manually enter 4-zeros, 0000

Tap the green check mark to continue,

118. Configure BT Device PIN

Enter BT Device’s Pin: 0000




Select Rover BT Device

HGPS S320 186xxxx

120. Name:

Name:

[ HGPS S320 186xxxx ]

Using the stylus, tap into the template,

121. The virtual keyboard will pop

Open and display HGPS S320 186xxxx

122. Enter data

Tap into the template, manually enter the name S320 186xxxx ROV

123. Tap the green check mark to

continue,



124. Name:

125. Name:

[ S320 186xxxx ROV ]

Renaming the Rover BT Device adding ROV suffix, will help remind the user which S320 Serial number is being deployed as the RTK Rover receiver.


127. Select Rover BT Device

128. S320 186xxxx ROV

129. Tap/select the Bond Bluetooth

Icon,


131. Bonding with Bluetooth….

132. GPS Rover | Comms menu

133. Type: Bluetooth

BT Type: Windows Mobile

Device: S320 186xxx ROV



134. GPS Rover | Receiver

135. Connecting to Instrument

136. GPS Rover | Receiver menu

137. Select the HEMS320 Antenna

Model

138. Measure and enter the S320 RTK Rover Antenna height, select the appropriate Antenna measurement, ( •) Vertical or ( ) Slant

If using 2-Meter RTK Pole, select (• ) Vertical

139. DGPS Type: None

140. Enter data

141. Using the stylus, tap into the

Antenna Height template, the virtual keyboard will pop open, manually enter 2.000, tap the green check to continue,



142. GPS Rover | Receiver menu,

143. GPS Rover | RTK menu,

144. Device: Select Internal nL400

Microhard,

145. Tap the green check mark to

Continue,

[√] Use Any Base ID

146. Equip > Configuring rover

Selecting Modem/Radio,


Configuring rover




Save complete.

This completes the required steps to create the Bluetooth connection between the data collector and the S320 RTK Rover.

149. The user is now ready to start the

RTK Rover survey, return to the SurvCE main menu,

150. Survey > 1 Store Points menu,

151. The user can check the SurvCE

Version,

152. Equip > 0 About SurvCE

153. About SurvCE menu,

154. Select/Tap the Return arrow to

Return the SurvCE main menu,



155. Survey > 1 Store Points

Further Information The Hemisphere GNSS Technical Support team in Scottsdale, AZ, USA has created these Quick Reference Guides for your convenience. If you need first-level technical support, please contact your regional Hemisphere GNSS - Distributor/Dealer. If you need second-level technical support, you can contact Hemisphere GNSS Technical Support at [email protected] to request additional technical support. This document is provided for technical support purposes only. Refer to the product documentation for warranty, license, and safety information associated with the product.

Documents

GeoSurveyor Mobile Bluetooth Connection to S320 · 89. Device: Internal nL400 Microhard 90. Message Type: RTCM v3.0 91. Select/tap the green check mark to continue, 92. Configuring