1

George M. Pharr, Ph.D., P.E.

TEES Distinguished Research Professor

Department of Materials Science and Engineering Texas A&M University

575 Ross Street; 244 RDMC Building College Station, TX 77843-3003

Phone: 979-458-3182 Fax: 979-862-6835

E-mail: pharr@tamu.edu

Professional Preparation Rice University Mechanical Engineering & Materials Science B.S., 1975 Stanford University Materials Science and Engineering M.S., 1977 Stanford University Materials Science and Engineering Ph.D., 1979 Cambridge University Engineering Department Postdoctoral 1979-80 Professional and Educational Experience 1975 Research Assistant - Los Alamos Scientific Laboratory, Los Alamos, NM 1975-1979 Research Assistant - Department of Materials Science, Stanford University 1976-1979 Metallurgical Consultant - Failure Analysis Associates, Palo Alto, CA 1979-1980 Postdoctoral Research Associate – Cambridge University, Cambridge, England 1980-1998 Professor of Materials Science, Rice University [Assistant Professor (1980-1985);

Associate Professor (1985-1991)] 1981-1986 Consultant - Sandia National Laboratories, Albuquerque, NM 1987-1993 Consultant - Kalium Chemicals, Chicago, IL 1987-1992 Affiliate - Los Alamos National Laboratory 1987-1988 Visiting Scientist - IBM Thomas J. Watson Research Center, Yorktown Heights, NY

(sabbatical) 1989-1994 Master - Wiess College, Rice University 1994-1996 Visiting Scientist - Oak Ridge National Laboratory, Oak Ridge, TN (sabbatical) 1998-2016 Professor of Materials Science and Engineering, The University of Tennessee 1998-2016 UT/ORNL Collaborating Scientist and Joint Faculty, Oak Ridge National Laboratory 2002-2005 Adjunct Professor, Department of Biomedical Engineering, The University of Memphis 2006-2011 Head - Department of Materials Science & Engineering, The University of Tennessee 2006-2009 Deputy Director - Joint Institute for Advanced Materials, The University of Tennessee 2007 Consultant - Howrey, LLP, Palo Alto, CA 2008 Consultant - Fish and Richardson, PC, Redwood City, CA 2008-2009 Consultant - McKenna, Long and Aldridge, Washington DC 2009-2016 Director - Joint Institute for Advanced Materials, The University of Tennessee 2009-2010 Visiting Scientist - Karlsruhe Institute of Technology, Karlsruhe, Germany (sabbatical) 2014 Visiting Professor, University of Hong Kong, Department of Mechanical Engineering 2017-present Professor of Materials Science and Engineering, Texas A&M University Honors & Awards 1975 ASME Hugh Scott Cameron Award - Rice University 1975 Outstanding Senior Engineer - Rice University 1976-1977 Corning Foundation Fellowship in Materials Science - Stanford University 1977-1979 Fannie and John Hertz Foundation Fellow, 1977-1979 1979-1980 NSF Postdoctoral Fellow - University of Cambridge

2

Honors & Awards (cont.) 1982-1985 Exxon Faculty Development Award - Rice University 1984-1986 IBM Faculty Development Award - Rice University 1984 ASM Bradley Stoughton Award for Young Teachers of Metallurgy 1985 Rice University Young Alumni Achievement Award 1994 Amoco Teaching Award - Rice University 1995-present Fellow - ASM International 1996-1998 Senior Research Fellow - SHaRE Program, U.S. Department of Energy 2001 University of Tennessee Science Alliance Award for Outstanding Research Achievement 2001 Thomson-ISI "Citation Classic" Recognition 2003 Thomson-ISI "Highly Cited Researcher" in Materials Science 2003-2004 Engineering Research Fellow Award - University of Tennessee, College of Engineering 2004 Moses E. and Mayme Brooks Distinguished Professor Award - University of Tennessee

College of Engineering 2004 Faculty Award for Overall Excellence in Teaching, Research, and Service - University of

Tennessee, Department of Materials Science and Engineering 2004 Chancellor's Award for Research and Creative Achievement - University of Tennessee 2005 Engineering Research Fellow Award - University of Tennessee, College of Engineering 2005 Thomson-ISI "New Hot Paper" Recognition 2007-2016 McKamey Professor of Engineering - University of Tennessee, College of Engineering 2007 Humboldt Research Award for Senior US Scientists - Alexander von Humboldt

Foundation 2008-2016 Chancellor's Professor - University of Tennessee (inaugural class) 2010 Innovation in Materials Characterization Award - Materials Research Society (inaugural) 2012-present Fellow - Materials Research Society 2012 Engineering Research Fellow Award - University of Tennessee, College of Engineering 2012 Top Cited Article in Scripta Materialia for the period 2007-2011 2014-present Member - National Academy of Engineering (elected spring 2014) 2014 Honorary Professor, Xi'an Jiaotong University, Xi'an, China 2015 University of Tennessee College of Engineering Research Achievement Award 2015-2016 University of Tennessee Macebearer (the University's highest academic honor) 2016-present Fellow - TMS (the Minerals, Metals and Materials Society) 2017-present TEES Distinguished Research Professor - Texas A&M University Editorial Positions 1990-2016 Associate Editor - Journal of the American Ceramic Society 2000 Volume Editor - MRS Bulletin 2004 Guest Editor - Journal of Materials Research, special focus issue on "Instrumented

Indentation Testing" (January 2004) 2006 Guest Editor - Philosophical Magazine, special issue on "Instrumented Indentation

Testing in Materials Research and Development" (November/December 2006 issue) 2009-2014 Editorial Advisory Board, Materials Characterization 2009 Guest Editor - Journal of Materials Research, special focus issue on "Indentation

Methods in Advanced Materials Research" (March 2009 issue) 2011 Guest Editor - Philosophical Magazine, special issue on "Nanomechanical Testing in

Materials Research and Development" (September 2012 issue) 2012-present Principal Editor - Journal of Materials Research 2015 Guest Editor - Philosophical Magazine, special issue on "Nanomechanical Testing in

Materials Research and Development IV" (June 2015 issue)

3

Editorial Positions (cont.) 2015 Guest Editor - Current Opinion in Solid State and Materials Science, special issue on

"Recent Advances in Small-Scale Mechanical Property Testing by Nanoindentation" (December 2015 issue)

Professional Society Membership Materials Research Society, ASM International, American Ceramic Society, TMS: The Minerals, Metals and Materials Society, American Society for Engineering Education, Registered Professional Engineer (Texas # 59094) Professional Activities & Service 1982-1984 Executive Committee – ASM Houston Chapter 1984 Instructor - Metals Engineering Institute 1987-1995 AIME Book Publishing Committee 1989-1991 Board of Directors - Sigma Xi Houston Chapter 1989 Symposium Chair - Mechanical Properties of Films and Coatings, International

Conference on Metallurgical Coatings, San Diego, CA 1990 Symposium Chair - Thins Films: Stresses and Mechanical Properties II, Spring Meeting

of the Materials Research Society, San Francisco, CA 1992 Symposium Chair - Mechanical Properties of Films and Coatings, International

Conference on Metallurgical Coatings and Thin Films, San Diego, CA 1995 Meeting Chair - Spring Meeting of the Materials Research Society, San Francisco, CA 1995-1998 Meeting Program Committee - Materials Research Society 1998 Vice Chair - Gordon Research Conference on Thin Film Mechanical Behavior,

Plymouth, NH 2000 Chair - Gordon Research Conference on Thin Film Mechanical Behavior, Plymouth, NH 2003 Program Committee - Fourth European Symposium on Nanomechanical Testing

(nanomech 4), Hueckelhoven, Germany 2004 Program Committee - Fifth European Symposium on Nanomechanical Testing

(nanomech 5), Hueckelhoven, Germany 2005 Chair and Organizer - NSF Workshop on High Pressure Phase Transformations,

Knoxville, TN 2005 Program Committee - Sixth European Symposium on Nanomechanical Testing

(nanomech 6), Hueckelhoven, Germany 2005 Chair and Organizer – ECI Conference on Instrumented Indentation Testing in Materials

Research and Development, Fodelle Beach, Crete 2006 Program Committee - Seventh European Symposium on Nanomechanical Testing

(nanomech 7), Hueckelhoven, Germany 2007 Program Committee - Eighth European Symposium on Nanomechanical Testing

(nanomech 8), Hueckelhoven, Germany 2008 Co-Chair and Organizer - International Symposium on Indentation Behaviour of

Materials, Hyderabad, India 2008 Program Committee - Ninth European Symposium on Nanomechanical Testing

(nanomech 9), Hueckelhoven, Germany 2009 Organizing Committee - ECI Conference on Nanomechanical Testing in Materials

Research and Development, Barga (Tuscany), Italy 2010-2014 Advisory Board - University of Kentucky, Department of Chemical and Materials

Engineering 2010 Discussion Leader - Gordon Research Conference on Thin Film and Small-Scale

Mechanical Behavior, Colby College, Waterville ME

4

Professional Activities & Service (cont.) 2010 External Review Panel - University of Rome III 2011 Organizing Committee - ECI Conference on Nanomechanical Testing in Materials

Research and Development, October 9-14, 2011, Lanzarote, Canary Islands, Spain 2012 Discussion Leader - Gordon Research Conference on Thin Film and Small-Scale

Mechanical Behavior, Colby College, Waterville ME 2012 Discussion Leader - Gordon Research Conference on Solid State Studies in Ceramics,

Mt. Holyoke College, South Hadley MA 2013 Symposium Organizer, Symposium BBB: "Size Dependent and Coupled Materials

Properties", Spring Meeting of the Materials Research Society, April 1-5, 2013, San Francisco, CA

2013 Organizing and Steering Committee - ECI Conference on Nanomechanical Testing in Materials Research and Development IV, Olhão, Algarve, Portugal, October 6-11, 2013

2013 NSF Panel Review, Biomechanics and Mechanobiology Program, 2013 2014-present Scientific Advisory Board, Erich Schmid Institute of Materials Science, Leoben, Austria 2014 External Review Panel, Helmholtz Research Center, Geesthacht, Germany 2014 Discussion Leader - Gordon Research Conference on Thin Film and Small-Scale

Mechanical Behavior, Bentley University, Boston, MA 2015 External Review Panel, Department of Mechanical Engineering, Johns Hopkins

University, March 2015, Baltimore, MD 2015-present Scientific Advisory Board, Max Planck Institute for Iron and Steel Research, Dusseldorf,

Germany 2015 Organizing and Steering Committee - ECI Conference on Nanomechanical Testing in

Materials Research and Development V, October 4-9, 2015, Albufeira, Portugal 2016-present Albert Sauveur Achievement Award Selection Committee, ASM International 2016-present Advisory Committee - Rice University, Department of Materials Science and

NanoEngineering 2017-present External Review Panel (Chair), Helmholtz Research Center, Geesthacht, Germany Activities & Service at Texas A&M University (2017-present) 2017-present MSEN Faculty Search Committee for small-scale mechanical behavior position (chair) 2017-present MSEN Faculty Search Committee for electron microscopy position 2017-present MSEN Undergraduate Curriculum Committee Activities & Service at the University of Tennessee (1998-2016) 1998-2006 Materials Science & Engineering Department Graduate Affairs Committee (chair, 2003-2006) 1998-1999 Advisory Group for University Focus Area in Materials 1999-present Materials Science and Engineering Space Utilization Committee 1999-2001 Materials Interdisciplinary Council (interim chair, spring 1999) 2001-2003 Board of Directors - The University of Tennessee Research Corporation 2001 Chair - MSE Physical Metallurgy Search Committee 2001-2005 College of Engineering Promotion and Tenure Committee (chair, 2004-2005) 2003-2004 College of Engineering PhD Curriculum Committee 2004-2005 College of Engineering Promotion and Tenure Process Review Committee 2004-2005 College of Engineering Awards Committee 2004-2005 Chair - Nanomaterials Degree Program Committee 2005-2006 Chair - Chemical Engineering Department Head Search Committee 2005 Interim Head - Department of Materials Science & Engineering 2006-2011 Head - Department of Materials Science & Engineering 2006-2009 Deputy Director - Joint Institute for Advanced Materials

5

Activities & Service at the University of Tennessee (1998-2016) (cont.) 2006-2007 Chair - Electric Engineering and Computer Science Department Head Search 2008 Search Committee - UTK Dean of Engineering 2009 Chair - Search Committee for the Governor's Chair in Energy Storage 2009-2016 Director - Joint Institute for Advanced Materials 2009-2015 Provost's Scientific Advisory Council 2011-2014 Core Research Facilities Committee 2011 College of Engineering Promotion and Tenure Committee 2012 Ad Hoc Committee on Academic Misconduct 2012-2016 MSE Department Graduate Affairs Committee 2012-2016 MSE Department Strategic Planning Committee 2014 Search Committee - UTK Associate Vice Chancellor for Research and Engagement 2014-2016 Co-director, University of Tennessee Core Microscopy Facility Activities & Service at Rice University (1980-1998) 1982-1985 University Council 1982-1985 Faculty Council 1982-1987 Committee on Financial Aid (chair, 1985-1987) 1982-1987 Rhodes and Marshall Selection Committee 1981-1998 Associate of Wiess College 1980-1998 Materials Science Undergraduate Committee 1980-1986 Mechanical Engineering Undergraduate Committee 1985-1987 Mechanical Engineering Department Graduate Coordinator 1986 Rice United Way Campaign Chairman 1986-1988 NASA Co-op Program Coordinator 1986-1987 Committee on Undergraduate Teaching 1987-1992 Rice Representative to the Oak Ridge Associated Universities 1988-1989 Committee on Community Affairs 1988-1990 Wiess College Divisional Advisor for Engineering 1988-1994 Materials Science Group Chairman 1989-1994 Master of Wiess College 1989-1994 ROTC Committee 1996-1998 Materials Science Group Chairman 1997-1998 Committee on Undergraduate Teaching Current Graduate Students and Postdoctoral Associates Robert C. Singleton (Ph.D., University of Tennessee) Brittnee A. Mound (Ph.D., University of Tennessee) Benjamin Hackett (Ph.D., University of Tennessee) Wesley Higgins (Ph.D., Texas A&M University) Yvonne Dieudonne (Ph.D., Texas A&M University) Postdoctoral and Research Associates 1983-1986 Prasad S. Godavarti, postdoctoral associate 1984-1987 Sai V. Raj, postdoctoral associate 1992-1994 J. Brian Peters, research associate 1996-1998 John C. Hay, postdoctoral associate 1998-2001 J. Gregory Swadener, postdoctoral associate 2000-2001 Dr. Karsten Durst, research associate 1999-2001 Asa K. Jamting, postdoctoral associate 2001-2003 Young J. Park, postdoctoral associate

6

Postdoctoral and Research Associates (cont.) 2002-2005 Jae-il Jang, postdoctoral associate 2001-2005 Andrei Rar, postdoctoral associate 2003-2008 Sanghoon Shim, postdoctoral associate 2005-2009 Jin Haeng Lee, postdoctoral associate 2009-2010 Erik G. Herbert, postdoctoral associate 2015-2016 Patrick A. Ritt, postdoctoral associate Visiting Scholars 1989-1990 Dr. Robert F. Cook 1996-1997 Professor Yew-Shing Ouyang 1996-1997 Professor B. Ben-Nissan 2001 Professor Carlos M. Lepienski 2002-2003 Professor Hyungyil Lee 2006 Dr. Karsten Durst 2011 Professor Oliver Kraft 2013 Professor Antonio Rinaldi 2014 Professor Marco Sebastiani 2015 Dr. Christoph Kirchlechner Graduate Student Dissertations at Rice University "A Study of Liquid Enhanced Creep in Porous Potassium Chloride", Gholamreza Sheikh, M.S., May

1984. "Application of Numerical Methods to Dislocation Modeling of Creep", Patrick A Tibbits, Ph.D., May

1988. "Effects of Liquid Phases on Interfacial Sliding in Alkali Halide Crystals", Tarik Baykara, Ph.D., May

1989. "The Hardness and Modulus of Mo/Al2O3 Microlaminates Determined by Nanoindentation", Shaun D.

McAdams, M.S., May 1991. "The Hardness and Modulus of MoSi2/Nb Microlaminates and Stressed Materials Determined by

Nanoindentation", Ting Y. Tsui, M.S., May 1992. "A Finite Element Study of the Effects of Residual Stress on Conical Indentation", Alexei Bolshakov,

M.S., May 1993. "Cracking in Brittle Materials During Low-Load Indentation and Its Relation to Fracture Toughness", D.

Scott Harding, Ph.D., May 1995. "Determining Stress-Strain Curves of Metals by Nondestructive Continuous Ball-Indentation Methods",

Bostjan Taljat, Ph.D., March 1996 (Fulbright Scholar from University of Ljubljana, Slovenia, co-advised at Oak Ridge National Laboratory).

"Finite Element Studies of Mechanical Property Testing by Nanoindentation Methods", Alexei Bolshakov, Ph.D., May 1996.

"Factors Limiting the Accuracy of Mechanical Property Measurement by Nanoindentation", Ting Y. Tsui, Ph.D., July 1996.

"Selected Mechanical Problems in Load and Depth Sensing Indentation Testing", Haitao Song, Ph.D., May 1999.

7

Graduate Student Dissertations at the University of Tennessee "Influence of Silicon Concentration the Nanoindentation and Nanoscratch Behavior of Pyrolytic Carbon",

Stephenson G. Thomas, M.S., November 2000. "A Combinatorial Study of the Nickel-Chromium System", Nathan Ryan Williams, M.S., December

2001. "Effects of Temperature and Strain Rate on the Scratch Resistance of Polymethylmethacrylate" Pierre

Jean Morel, M.S., April 2002. "Dynamic Mechanical Characterization of Very Soft Polymeric Materials Using Nanoindentation

Techniques", Nicolas Conte, M.S., April 2002. "Directional Solidification, Microstructures, and Mechanical Properties of Cr-Cr3Si Eutectic Alloys",

Hongbin Bei, Ph.D., December 2003. "Thermal Aging Effects on the Microstructure, Oxidation Behavior, and Mechanical Properties of As-

Cast Ni3Al Alloys", Dongyun Lee, Ph.D., May 2004. "Measurement of Material Creep Parameters of Amorphous Selenium by Nanoindentation and the

Relationship Between Indentation Creep and Uniaxial Creep", James Anthony LaManna, M.S., August 2004.

"Combinatorial Design of Nickel-Chromium Alloys by Physical Vapor Deposition and Electron Beam Welding", Jaret James Frafjord, M.S., December 2004.

"An Experimental Evaluation of the Constant b Relating the Contact Stiffness to the Contact Area in Nanoindentation", Jeremy Harper Strader, M.S., August 2005.

"Processing and Characterization of Oxide Dispersion Strengthened 14YWKT Ferritic Alloys", Michael Keith West, Ph.D., August 2006.

"A Study of the Relationship Between Indentation Creep and Uniaxial Creep", James Anthony LaManna, Ph.D., December 2006.

"A Kinetic Study of Indentation Pop-out in Silicon", Songqing Wen, Ph.D., December 2006. "A Study of Indentation Creep Using the Finite Element Method", Sangjoon Sohn, Ph.D., December

2007. "A Finite Element Study of the Contact Stiffness of Homogenous Materials and Thin Films", Haitao Xu,

Ph.D., December 2007. "An Experimental Investigation of the Elastic and Viscoelastic Properties of Small Volumes of Material",

Erik G. Herbert, Ph.D., August 2008. "A Study of the Indentation Size Effect in Copper", Jeremy Harper Strader, Ph.D. December 2008. "Metallurgical Effects on Long-Term Creep Rupture in a New Nickel-Based Alloy", John Paul

Shingledecker, Ph.D., May 2012. "Influences of Sample Preparation on the Indentation Size Effect and Nanoindentation Pop-in in Nickel",

Zhigang Wang, Ph.D., May 2012. "Measurement of Power-law Creep Parameters by Instrumented Indentation Methods", Caijun Su, Ph.D.,

August 2012. "Understanding Size Effects in Small Scale Deformation: A Statistical Perspective", Sudharshan Phani

Pardhasaradhi, Ph.D., December 2012. "Evaluation of the Transient Thermal Performance of a Graphite Foam/Phase Change Material

Composite", Michael P. Trammell, M.S., May 2013. "A Study of Indentation Cracking in Brittle Materials Using Cohesive Zone Finite Elements", Kurt E.

Johanns, Ph.D., May 2014.

8

Graduate Student Dissertations at the University of Tennessee (cont.) "Temperature and Alloying Effects on the Mechanical Properties of Equiatomic FCC Solid Solution

Alloys", Zhenggang Wu, Ph.D., August 2014. "Low Temperature Thermally Activated CVD of Silicon on Molybdenum for Oxidation Protection",

Brian C. Jolly, M.S., August 2014. "Characterizing the Mechanical Behavior of Single and Polycrystalline Silicon Carbide with

Nanoindentation", Amit V. Datye, Ph.D., December 2014. "Mixing Metals for Magic Materials", Ethan E. Fox, M.S., May 2015. "Temperature Dependent Mechanical Behavior of Solid Acids", Ryan S. Ginder, Ph.D., December 2016. Courses Taught at the University of Tennessee MSE 101 - Advances in Materials Science and Engineering MSE 201 - Introduction to Materials Science and Engineering MSE 302 - Mechanical Behavior of Materials I MSE 494 - Special Project Laboratory MSE 503 - Graduate Seminar in Metallurgical Engineering MSE 512 - Fundamentals of Materials Science II MSE 666 - Nanoindentation and Contact Mechanics Courses Taught at Rice University MSCI 301 - Introduction to Materials Science MSCI 303 - Materials Science Junior Laboratory MSCI 311- Introduction to Design MSCI 402 - Mechanical Properties of Materials MSCI 411 - Metallography and Phase Relations MSCI 415 - Ceramics and Glasses MSCI 500, 501 - Materials Science Seminar MSCI 535 - Introduction to X-Ray Diffraction and Electron Microscopy MSCI 537 - Materials Science Senior Laboratory MSCI 550 - Time Dependent Plasticity MSCI 561, 562 - Advanced Metallurgical Laboratory MSCI 609 - Fracture Mechanics MSCI 614 - Special Topics: Biomaterials MSCI 614 - Special Topics: Mechanical Behavior of Ceramics MSCI 614 - Special Topics: Contact Mechanics MSCI 615 - Special Topics: Metal Forming MECH 605 - Special Topics: Welding and Joining

9

Invited Presentations - George M. Pharr

"A Study of Liquid Phase Enhanced Creep in Potassium Chloride", Sandia National Laboratories, Albuquerque, January 1981.

"A Numerical Study of Cavity Growth Controlled by Surface Diffusion", Sandia National Laboratories, Albuquerque, June 1981.

"A Study of Liquid Phase Creep Enhancement in a Model Material System", University of Texas at Austin, April 1983.

"Flow of Liquid-Solid Systems", 1983 Gordon Conference on Physical Metallurgy, Holderness School, Plymouth, New Hampshire, June 1983.

"Liquid Phase Creep Enhancement in Porous Potassium Chloride", Texas A&M University, April 1984. "Creep of Solids Containing Liquid Phases", Allied-Signal Corporation, Morristown, New Jersey, May

1986. "Nanoindentation Studies of Beam Processed Materials", Los Alamos National Laboratory, May 1987. "Creep of Solids Containing Liquid Phases", NASA Lewis Research Center, Cleveland, Ohio, October

1987. "High Temperature Deformation of Ceramics - An Overview", 90th Annual Meeting of the American

Ceramic Society, Cincinnati, May 1988. "Creep of Solids Containing Liquid or Amorphous Grain Boundary Phases", Michael F. Ashby

Symposium, Fall Meeting of the Metallurgical Society of AIME, Chicago, September 1988. "Crack Formation in Brittle Materials by Sharp Contact", Seventh International Conference on Fracture,

Houston, March 1989 (with R.F. Cook and W.C. Oliver). "The Anomalous Behavior of Silicon During Nanoindentation", 1991 Fall Meeting of the Materials

Research Society, Boston, December 1991. "The Mechanical Characterization of Thin Films Using Indentation Experiments", International

Conference on Metallurgical Coatings and Thin Films, San Diego, April 1992 (with W.C. Oliver and B.C. Lucas).

"Measurement of Fracture Toughness in Thin Films and Small Volumes Using Nanoindentation Methods", NATO Advanced Study Institute on Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures, Praia Do Porto Novo, Portugal, July 1992 (with D.S. Harding and W.C. Oliver).

"Mechanical Characterization Using Indentation Experiments", NATO Advanced Study Institute on Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures, Praia Do Porto Novo, Portugal, July 1992 (with W.C. Oliver and B.N. Lucas).

"Mechanical Characterization on the Submicron Scale Using Indentation Experiments", Annual Meeting of the Metallurgical Society of the AIME, Denver, February 1993 (with W.C. Oliver and B.N. Lucas).

"Studies of the Mechanical Behavior of Rocks and Ceramics Using Nanoindentation", 1993 Spring Meeting of the Materials Research Society, San Francisco, April 1993 (with W.C. Oliver).

"Measurement of Thin Film Mechanical Properties Using Nanoindentation", International Conference on Metallurgical Coatings and Thin Films, San Diego, April 1993 (with W.C. Oliver).

"Measurement of the Mechanical Properties of Ceramics and Glasses Using Nanoindentation", 95th Annual Meeting of the American Ceramic Society, Cincinnati, April 1993 (with W.C. Oliver).

"Deformation Processes During Ultra-Low Load Indentation Experiments", Micromechanics of Small Volumes Workshop, La Jolla, February 1994 (with W.C. Oliver).

10

Invited Presentations (cont.) "Effects of Residual Stress on the Measurement of Mechanical Properties Using Nanoindentation", 1994

Spring Meeting of the Materials Research Society, San Francisco, April 1994 (with T.Y. Tsui, A. Bolshakov, and W.C. Oliver).

"Cracking During Nanoindentation and the Measurement of Fracture Toughness at Small Scales", Workshop on the Mechanics and Materials Science of Contact: Issues and Opportunities (sponsored by the National Science Foundation), Nashville, July 1994 (with D.S. Harding and W.C. Oliver).

"Evaluation of Mechanical Properties at the Micro- and Nanoscale", Gordon Research Conference on Solid State Studies in Ceramics, New Hampton, NH, August 1994.

"Measurement of the Mechanical Properties of Ceramics and Glasses Using Nanoindentation", Fall Meeting of the Basic Science Division of the American Ceramic Society, Louisville KY, September 1994 (with D.S. Harding and W.C. Oliver).

"Nanoindentation: Past and Future", American Society for Metals, Knoxville, TN, January 1995. "Effects of Residual Stress on the Measurement of Mechanical Properties Using Instrumented

Indentation", International Workshop on Instrumented Indentation sponsored by the Institute for Mechanics and Materials, San Diego, CA, April 1995 (with T.Y. Tsui, A. Bolshakov, and W.C. Oliver).

"Measurement of Mechanical Properties on the Sub-micron Scale Using Nanoindentation", IBM Storage Systems Division, San Jose, CA, April 1995.

"Measuring Hardness, Modulus, Creep, and Fracture Toughness Using Instrumented Indentation Tests", International Workshop on Instrumented Indentation sponsored by the Institute for Mechanics and Materials, San Diego, CA, April 1995 (with W.C. Oliver and B.N. Lucas).

"Tip Geometry Calibration: Is Fused Silica and Effective Standard for Ultra-Low Load Indentation?", International Workshop on Instrumented Indentation sponsored by the Institute for Mechanics and Materials, San Diego, CA, April 1995 (with B.N. Lucas and W.C. Oliver).

"Cracking During Nanoindentation and Its Use in the Measurement of Fracture Toughness at Small Scales", Stanford University, Department of Materials Science and Engineering, Palo Alto, CA, October 1995.

"Measurement of Mechanical Properties at the Micron and Sub-micron Scale Using Nanoindentation Methods", Ohio State University, Department of Materials Science and Engineering, Columbus, OH, November 1995.

"Measurement of Mechanical Properties on the Sub-micron Scale Using Nanoindentation", University of Ljubljana, Ljubljana, Slovenia, March 1996.

"Fracture Toughness and Residual Stress: Can They Be Measured by Nanoindentation Methods ?", Ecole Centrale de Lyon, Laboratoire de Tribologie et Dynamique des Systemes, March 1996.

"Small-Scale Contact Mechanics and the Measurement of Mechanical Properties by Nanoindentation Methods", 1996 ASME Conference on Mechanics and Materials, Johns Hopkins University, Baltimore, MD, June 1996.

"Measurement of Mechanical Properties at the Micron and Sub-micron Scale by Nanoindentation", Iowa State University, Department of Materials Science and Engineering, Ames, IA, October 1996.

"Measurement of Mechanical Properties Using Nanoindentation", Carbomedics Corporation, Austin, TX, February 1997.

"Measurement of Mechanical Properties at the Micron and Sub-micron Scale by Nanoindentation", Houston Chapter of ASM, Houston, TX, March 1997.

11

Invited Presentations (cont.) "Measurement of Mechanical Properties by Ultra-low Load Indentation" (keynote address), Engineering

Foundation Conference on the Modification of Ceramics and Semiconductors by Energetic Beam Bombardment, Il Ciocco, Italy, May 1997.

"Measurement of Mechanical Properties by Nanoindentation", University of Tennessee, Department of Materials Science and Engineering, Knoxville, TN, August 1997.

"Nanoindentation of Soft Films on Hard Substrates: Experiments and Finite Element Simulations", 1997 Fall Meeting of the Materials Research Society, Boston, MA, December 1997 (with A. Bolshakov, T.Y. Tsui, and J.C. Hay).

"Nanoindentation Experiments on Coated Systems - Approaches Using Continuous Stiffness Techniques", 1998 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1998 (with T.F. Page, J.C. Hay, W.C. Oliver, B.N. Lucas, E. Herbert, and L. Riester).

"The Anomalous Behavior of Silicon During Nanoindentation", 1998 Spring Topical Meeting of American Society of Precision Engineering: Silicon Machining, Carmel, CA, April 1998.

"Measurement of Thin Film Properties by Load and Depth Sensing Indentation", Gordon Research Conference on Thin Film Mechanical Behavior, Plymouth, NH, June 1998.

“Nanoindentation of Thin Films and Bones”, The University of Tennessee, Department of Materials Science and Engineering, Knoxville, TN, October, 1998.

"Fundamentals of Load and Depth Sensing Indentation Testing" (keynote address), 13th Brazilian Congress on Materials Science and Engineering, Curitiba PR, Brazil, December 1998.

"Measurement of Mechanical Properties by Nanoindentation" (keynote address), Workshop on Ceramic Thin Films, American Ceramic Society (Minnesota Section), Minneapolis, MN, March 1999.

"Deciphering Indentation Load-Displacement Curves", Engineering Foundation Conference on Mechanical Properties of Films, Coatings and Interfacial Materials, Il Ciocco, Italy, June, 1999.

"Nanoindentation for Materials Testing", NSF Workshop on Nano and Micromechanics of Solids for Emerging Science and Technology, Palo Alto, CA, October 1999 (with W.D. Nix).

"Measurement of Thin Film Mechanical Properties by Nanoindentation", The University of Tennessee, Department of Mechanical and Aerospace Engineering and Engineering Science, Knoxville, TN, November, 1999.

"A Simple Model for Pile-up During Indentation by A Rigid Cone", 1999 Fall Meeting of the Materials Research Society, Boston, MA, December 1999 (with H. Song).

"Critical Issues in Measuring the Mechanical Properties of Thin Films with Nanoindentation", National Institute of Standards and Technology, Gaithersburg, MD, January 2000.

"Measurement of Mechanical Properties with Nanoindentation", Virginia Polytechnic Institute, Department of Materials Science and Engineering, February, 2000.

"Deciphering Nanoindentation Load-Displacement Curves", Johns Hopkins University, Department of Materials Science and Engineering, Baltimore, MD, March, 2000.

"Fundamentals of Nanoindentation", Technical University of Chemnitz, Chemnitz, Germany, June 2000. "Understanding the Mathematical Form of Nanoindentation Load-Displacement Curves", Technical

University of Chemnitz, Chemnitz, Germany, June 2000. "Critical Issues in Modeling Elastic and Elastic-Plastic Contact with Conical Indenters", Technical

University of Chemnitz, Chemnitz, Germany, June 2000. "Measurement of Mechanical Properties at Small Scales by Nanoindentation", 2000 Fall Meeting of ASM

International, St. Louis, MO, October 2000.

12

Invited Presentations (cont.) "A Method for Residual Stress Measurement by Nanoindentation with Spherical Indenters", 2000 Fall

Meeting of the Materials Research Society, Boston, MA, November 2000 (with J.G. Swadener and B. Taljat).

"What’s in a Nanoindentation Load-Displacement Curve?", 2000 Fall Meeting of the Materials Research Society, Boston, MA, November 2000 (with A. Bolshakov and H. Song).

"Measurement of Residual Stresses by Nanoindentation with Spheres", Los Alamos National Laboratory Workshop on Nanomechanics, Los Alamos, NM, January 2001 (with J.G. Swadener and B. Taljat).

"Anisotropic Elastic Moduli from Nanoindentation and Ultrasonic Velocity Measurements in Human Tibial Cortical Bone", 2001 TMS Annual Meeting, Symposium on "Structural Biomaterials for the 21st Century", New Orleans, LA, February 2001 (with J.G. Swadener, J.-Y. Rho, and J. Fan).

"Probing the Mechanical Properties of Materials at Small Scales by Nanoindentation", University of Wisconsin, Department of Materials Science and Engineering, Madison, WI, March 2001.

"Probing the Mechanical Properties of Materials at Small Scales by Nanoindentation", Sandia National Laboratory, Albuquerque, NM, March 2001.

"Probing the Mechanical Properties of Materials at Small Scales by Nanoindentation", Los Alamos National Laboratory, Condensed Matter and Materials Science Colloquium, Los Alamos, NM, March 2001.

"Probing Mechanical Properties at Small Scales by Nanoindentation", Center for Advanced Friction Studies, Southern Illinois University, May 2001.

"Measurement of Residual Stresses by Nanoindentation with Spherical Indenters", 2nd European Symposium on Nanomechanical Testing, Huckelhoven, Germany, September 2001 (with J.G. Swadener and B. Taljat).

"How Strong are Small Things?", University of Tennessee Science Forum, Knoxville, TN, October 2001. "Probing the Mechanical Properties of Materials at Small Scales by Nanoindentation", Department of

Physics, University of Saarbruecken, Saarbruecken, Germany, September, 2001. "Almost Everything I Ever Needed to Know I Learned from Bill Nix - the Rest I Learned in

Kindergarten", Stanford University, Department of Materials Science and Engineering, Stanford, CA, October 2001.

"Mechanical Characterization of Bone by Nanoindentation", 2001 Fall Meeting of the Materials Research Society, Boston, MA, November 2001 (with J.G. Swadener and J.-Y. Rho).

"Plasticity During Indentation and It's Use in the Measurement of Residual Stress", PLASTICITY 2002: Ninth International Symposium on Plasticity, Aruba, January 2002 (with J.G. Swadener and B. Taljat).

"Smaller is (Mostly) Stronger: Recent Developments in Our Understanding of the Indentation Size Effect", Dartmouth University, Thayer School of Engineering, December 2001 (with J.G. Swadener and E.P. George).

"Novel Techniques for Mechanical Characterization of Materials", Georgia Institute of Technology, Department of Materials Science and Engineering, May, 2001.

"Probing the Mechanical Properties of Materials with Nanoindentation", General Electric Corporate Research Seminar Series on Nanotechnology, General Electric Global Research Center, Schenectady, NY, July, 2002.

"Correlation of the Indentation Size Effect for Spherical and Pyramidal Indenters", NSF Workshop on Strain Gradient Plasticity and Discrete Dislocations: Theory and Experiment", Carnegie Melon

13

Invited Presentations (cont.) University, Center for Nonlinear Analysis, Pittsburgh, PA, August 2002 (with J.G Swadener and E.P.

George). "The Indentation Size Effect in Iridium", MTS Systems Corporation 3rd Annual Nanoindenter Users

Group Meeting, Las Vegas, NV, August 2002 (with J.G Swadener and E.P. George). "A New Approach to Measuring the Elastic Modulus of Thin Films and Surface Layers by

Nanoindentation", 2002 Fall Meeting of the Materials Research Society, Boston, MA, December 2002 (with A. Rar and H. Song).

"Factors Limiting the Measurement of Thin Film Residual Stresses by Nanoindentation", International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, April 2003 (with Y.J. Park and C.M. Lepienski).

"Microstructure and Thermal Stability of Lamellar Cr-Silicides”, Thermec’ 2003: International Conference on Processing and Manufacture of Advanced Materials, Madrid, Spain, July2003 (with E.P. George, H. Bei, and K. Serin).

“Phase Transformation and Cracking in Brittle Materials during Nanoindentation”, NSF Workshop on High Pressure Phase Transformations, Charlotte, NC, August 2003 (with J.-I. Jang and S. Wen).

"Probing the Mechanical Properties of Materials at Small Scales with Nanoindentation", American Foundry Society Lost Foam Division Meeting, Knoxville, TN, June 2003.

"The Indentation Size Effect with Pyramidal and Spherical Indenters", University of Illinois, Department of Mechanical Engineering, Urbana-Champagne, IL, September 2003 (with J.G. Swadener and E.P. George).

"The Indentation Size Effect with Pyramidal and Spherical Indenters", 4th European Symposium on Nanomechanical Testing, Hueckelhoven, Germany, September 2003 (with J.G. Swadener and E.P. George).

"Probing the Mechanical Properties of Materials at Small Scales by Nanoindentation", First International Symposium on Nanostructured Materials: Structural Applications, Korean Institute of Science and Technology, Seoul, Korea, October 2003.

"The Indentation Size Effect with Pyramidal and Spherical Indenters", Seoul National University, Seoul, Korea, October 2003 (with J.G. Swadener and E.P. George).

"The Indentation Size Effect with Pyramidal and Spherical Indenters", Korean Institute for Standards (KRISS), Daejeon, Korea, October 2003 (with J.G. Swadener and E.P. George).

"Recent Developments in Our Understanding of Nanoscale Mechanical Behavior", International Meeting on Nanomaterials, Tokyo Institute of Technology, November 2003 (with E.P. George, J.G. Swadener, and H. Bei).

"Probing the Mechanical Properties of Materials at Small Scales by Nanoindentation", Department of Materials Science and Engineering, The University of Utah, March 2004.

"Recent Observations of Phase Transformation in Silicon during Nanoindentation”, NSF Workshop on High Pressure Phase Transformations, Raleigh, NC, August 2004 (with J.-I. Jang and S. Wen).

"Nanoscale Load-Displacement Studies", CNMS Workshop on Microscopy, Metrology, and Manipulations Using Electrons, Ions, and Photons for Nanophase Materials Sciences, September 15-16, 2004, Oak Ridge, TN.

"The Indentation Size Effect with Pyramidal and Spherical Indenters", Case Western Reserve University, Department of Materials Science and Engineering, Cleveland, Ohio, October 2004 (with J.G. Swadener and E.P. George).

14

Invited Presentations (cont.) "Development of Combinatorial Methods for Alloy Design and Optimization", ASM Materials Solution

Conference & Show, Columbus, Ohio, October 2004 (with E.P. George, M.L. Santella, E.D. Specht, A. Rar, J. Frafjord, P. Rack, and J. Fowlkes).

"Nanoindentation as a Tool for Developing New Structural Materials", ASM Materials Solution Conference & Show, Columbus, Ohio, October 2004 (with E.P. George, M.L. Santella, A. Rar, H. Bei, and D.Y. Lee).

"Pop-in Revisited: A New Approach to the Analysis of Nanoindentation Pop-in Data", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with H. Bei, E.P. George, and J.L. Hay).

"Cracking During Nanoindentation and Its Relation to Fracture Toughness", 107th Annual Meeting of the American Ceramic Society, April 10-13, 2005, Baltimore, MD.

"Pop-in, Cracking, and the Indentation Size Effect: Nanoindentation Studies of Important Nanomechanical Deformation Phenomena", Croucher Foundation Advanced Study Institute on Frontier Research in Nanomechanics II, May 16-20, 2005, Hong Kong.

"Cracking During Nanoindentation of Silicon and Germanium and Its Relation to Fracture Toughness", 2005 Fall Meeting of the Materials Research Society, Boston, MA, November 2005 (with Jae-il Jang).

"Probing the Mechanical Properties of Materials at Small Scales by Nanoindentation", Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC, February 2006.

"Influences of Indenter Geometry on the Indentation Size Effect", Brown University, Division of Engineering, Providence, RI, May 1, 2006.

"Influences of Indenter Geometry on the Indentation Size Effect", IUTAM Symposium on Plasticity at the Micron Scale, June 11-15, 2006, Copenhagen, Denmark (with J.H. Strader).

"Small-Scale Mechanical Behavior of Intermetallics and Composites", 14th International Conference on the Strength of Materials, June 4-9, 2006, Xian, China (with E.P. George and H. Bei).

"Influences of Indenter Geometry on the Indentation Size Effect", International Workshop on Mechanical Behavior of Materials at Small Length Scales, Bangalore, India, February 5-9, 2007 (with J.H. Strader).

"Probing the Mechanical Properties of Materials with Nanoindentation", Diamond Jubilee Lecture, Indian Institute of Science, Bangalore, India, February 7, 2007.

"Nanoindentation as a Tool for Developing New Structural Materials", General Electric Research Center, Bangalore, India, February 9, 2007.

"Probing the Mechanical Properties of Materials with Nanoindentation", International Advanced Research Center for Powder Metallurgy and New Materials (ARCI), Hyderabad, India, February 12, 2007.

"Critical Issues in Measuring Small Scale Mechanical Properties by Nanoindentation", NIST Workshop on Materials Characterization for Nanoscale Reliability", Boulder, CO, August 14-16, 2007.

"Probing the Mechanical Properties of Materials at Small-Scaled by Nanoindentation", Tewkesbury Fellow Lecture, Department of Mechanical Engineering, University of Melbourne, Melbourne, Australia, October 4, 2007.

"Probing the Mechanical Properties of Materials with Nanoindentation", Department of Mechanical Engineering, Johns Hopkins University, November 1, 2007.

"Influences of Indenter Geometry on the Indentation Size Effect", Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD, November 2, 2007.

15

Invited Presentations (cont.) "Investigation of Small-Scale Plasticity by Micropillar Compression and Nanoindentation", Department

of Materials Science and Engineering, Ohio State University, Columbus, OH, November 2, 2007 (with H. Bei, S. Shim, Y. F. Gao, and E. P. George).

"The Indentation Size Effect: A Critical Assessment of Mechanistic Models Using New Experimental Results", International Symposium on Indentation Behavior of Materials, Hyderabad, India, February 3-7, 2008.

"Probing the Mechanical Properties of Materials with Nanoindentation", Department of Mechanical Engineering, Rice University, March 19, 2008.

"Influences of Indenter Geometry on the Indentation Size Effect", Department of Aerospace Engineering and Engineering Mechanics, The University of Texas, Austin, TX, March 20, 2008.

"Nanoindentation of Metals: Influences of Indenter Geometry on the Indentation Size Effect", 7th International Workshop on Advanced Intermetallics and Metallic Materials, Harbin, China, May 18-23, 2008.

"Probing the Mechanical Properties of Materials with Nanoindentation", Department of Materials Science and Engineering, Beijing University of Science and Technology, May 27, 2008.

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", Forschungzentrum Karlsruhe, Karlsruhe, Germany, July 11, 2008.

"Probing the Mechanical Properties of Materials with Nanoindentation", Department of Mechanical Engineering, University of Karlsruhe, Karlsruhe, Germany, July 14, 2008.

"Pillars and Pop-in: Some Recent Experimental Observations", 2008 Gordon Research Conference on Thin Film and Small-Scale Mechanical Behavior, Waterville, ME, July 25-30, 2008.

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", Keynote Address, MSE'08: Materials Science and Engineering Congress and Exhibition on Advanced Materials and Processes", September 1-4, 2008, Nürnberg, Germany.

"Critical Issues in Measuring Hardness at Small Scales by Nanoindentation with Continuous Stiffness Measurement", 9th European Symposium on Nanomechanical Testing, September 9-11, 2008, Huckelhoven, Germany (with J.H. Strader and W.C. Oliver).

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", Department of Materials Science and Engineering, The University of North Texas, Denton, TX, September 24, 2008.

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", Department of Materials Science and Engineering, The University of Virginia, Charlottesville, VA, November 10, 2008.

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", Department of Chemical Engineering and Materials Science, The University of Kentucky, Lexington, KY, March 25, 2008.

"Size Effects in Micro-Pillar Compression and Nanoindentation", 2009 TMS Annual Meeting, San Francisco, CA, February 15-19, 2009 (with H. Bei, S. Shim, M.K. Miller, and E.P. George).

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", 2009 Spring Meeting of the Materials Research Society, San Francisco, CA, April 12-17, 2009 (with H. Bei, S. Shim, Y.F. Gao and E.P. George).

"Probing the Mechanical Properties of Materials with Nanoindentation", Department of Chemical Engineering, University of Waterloo, Waterloo, Canada, May 15, 2009.

16

Invited Presentations (cont.) "Probing the Transition from Ideal to Bulk Strength with Nanoindentation and Micropillar Compression",

Workshop on Probing the Limits of Strength, Berkeley, CA, August 10-12, 2009 (with H. Bei, S. Shim, Y.F. Gao, and E.P. George).

"Recent Developments in Understanding Small-Scale Mechanical Behavior: Micropillar Compression and Nanoindentation", 15th International Conference on the Strength of Materials, Dresden, Germany, August 16-21, 2009 (with E. P. George, H. Bei, S. Shim, and Y. F. Gao).

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", Department of Physics, The University of Chemnitz, Chemnitz, Germany, October 21, 2009.

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", Department of Mechanical Engineering, Ruhr University Bochum, Bochum, Germany, October 28, 2009.

"Critical Issues in Making Small-Scale Mechanical Property Measurements by Nanoindentation with Dynamic Stiffness Measurement", 2009 Fall Meeting of the Materials Research Society, Boston, MA, December 1-5, 2009 (with J.H. Strader and W.C. Oliver).

"Probing the Mechanical Properties of Materials at Small Scales by Nanoindentation", Erich Schmid Institut für Materialswissenschaft, Leoben, Austria, January 7, 2010.

"From Pop-in to Pillars: Probing the Mechanisms of Small-Scale Plasticity with Nanoindentation", Institut für Materialphysik, The University of Göttingen, Göttingen, Germany, January 21, 2010.

"From Pop-in to Pillars: The Utility of Nanoindentation in the Study of Small Scale Plasticity", Max-Plank-Institut für Eisenforschung, Düsseldorf, Germany, January 28, 2010.

"Measurement of Elastic Modulus and Residual Stress in Thin Metallic Films by Nanoindentation of Thin Film Bridges", University of Erlangen, Department of Materials Science and Engineering, Erlangen, Germany, February 4, 2010 (with P.S. Phani, E.G. Herbert, and W.C. Oliver).

"Critical Issues in Making Small-Scale Mechanical Property Measurements by Nanoindentation with Dynamic Stiffness Measurement", CAMTEC II Symposium on Fine-Scale Mechanical Characterization and Behaviour, Cambridge, England, March 29-30, 2010 (with J.H. Strader and W.C. Oliver).

"Nanoindentation in Materials Research: Past, Present, and Future", 2010 Spring Meeting of the Materials Research Society, San Francisco, CA, April 5-9, 2010 (with W.C. Oliver)

"Measurement of Elastic Modulus and Residual Stress in Thin Metallic Films by Nanoindentation of Thin Film Bridges", 11th International Workshop on Stress-Induced Phenomena in Metallization, Dresden, Germany, April 12-14, 2010 (with P.S. Phani, E.G. Herbert, and W.C. Oliver).

"From Pop-in to Pillars: Probing the Mechanisms of Small Scale Plasticity with Nanoindentation", Max-Plank-Institut for Metals Research, Stuttgart, Germany, April 19, 2010.

"Exploring the Strange New World of Small-Scale Deformation with Nanoindentation", Plenary Conference Lecture, International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA, April 26-30, 2010.

"From Pop-in to Pillars: The Utility of Nanoindentation in Probing the Mechanisms of Small-Scale Plasticity", Department of Mechanical and Aerospace Engineering, The University of California San Diego, San Diego, CA, April 26, 2010.

"From Pop-in to Pillars: Probing the Mechanisms of Small-Scale Plasticity with Nanoindentation", Department of Materials Science and Engineering, The University of California Santa Barbara, Santa Barbara, CA, April 30, 2010.

17

Invited Presentations (cont.) "Probing the Mechanical Properties of Materials with Nanoindentation", Department of Geology and

Natural Sciences, Ludwig-Maximillian University, Munich, Germany, May 7, 2010. "From Pop-in to Pillars: The Utility of Nanoindentation in Probing the Mechanisms of Small-Scale

Plasticity", Ira J. Fulton School of Engineering, Arizona State University, Tempe, AZ, November 5, 2010.

"From Pop-in to Pillars: The Utility of Nanoindentation in Probing the Mechanisms of Small-Scale Plasticity", Department of Materials Science and Engineering, University of Maryland, College Park, MD, November 19, 2010.

"From Pop-in to Pillars: The Utility of Nanoindentation in Probing the Mechanisms of Small-Scale Plasticity", Division of Engineering and Applied Science, Harvard University, Cambridge, MA, February 23, 2011.

"Toward a Quantitative Understanding of Single Defect Physics Controlling Mechanical Behavior", Science for Our Nation's Energy Future: Energy Frontier Research Centers Summit and Forum, Washington DC, May 25-27, 2011

"A Simple Stochastic Model for Yielding in Specimens with a Limited Number of Dislocations", XIX International Materials Congress, Cancun, Mexico, August 15-19, 2011 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Probing the Mechanisms of Small-Scale Plasticity with Nanoindentation", Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA, September 30, 2011.

"Size Effects in Plasticity: The Importance of Stochastic Processes During Yielding of Specimens with a Limited Number of Dislocations", Keynote Presentation, International Symposium on Plasticity 2012, San Juan, Puerto Rico, January 3-8, 2012 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Understanding the Small-Scale Plasticity of Pillars in Compression and Fibers in Tension", Symposium in Memory of Patrick Veyssière: Understanding the Mechanisms Controlling Plastic Flow, TMS Annual Meeting, Orlando, FL, March 11-15, 2012 (with E.P. George, P. Sudharshan Phani, and K.E. Johanns).

"Exploring the Unusual World of Small-Scale Mechanical Behavior with Nanoindentation", Oak Ridge Chapter of the American Society for Materials (ASM), Oak Ridge, TN, May 17, 2012.

"Probing the Mechanisms of Small-Scale Plasticity with Nanoindentation", Department of Materials Science and Engineering, Hanyang University, Seoul Korea, June 4, 2012.

"Probing the Mechanical Properties of Materials at Small Scales with Nanoindentation", Korean Research Institute of Chemical Technology, Daejeon, Korea, June 5, 2012.

"Probing the Mechanical Properties of Materials at Small Scales with Nanoindentation", Toyo Corporation, Tokyo, Japan, June 7, 2012.

"Measurement of Power Law Creep Parameters by Instrumented Indentation Methods", Nanomeasure 2012, Stanford University, Stanford, CA, June 19-20, 2012 (with C. Su, E.G. Herbert, and W.C. Oliver).

"Probing the Mechanical Properties of Materials with Nanoindentation", College of Engineering, University of Rome III, Rome, Italy, May 13, 2013.

"Critical Issues in Understanding Nanoindentation Load-Displacement Data and Making Small Depth Measurements with Continuous Stiffness Techniques", College of Engineering, University of Rome III, Rome, Italy, May 13, 2013.

"From Pop-in to Pillars: The Utility of Nanoindentation in Understanding the Mechanisms of Small-Scale Plasticity", College of Engineering, University of Rome III, Rome, Italy, May 14, 2013.

18

Invited Presentations (cont.) "Measurement of Power Law Creep Parameters by Instrumented Indentation Methods", College of

Engineering, University of Rome III, Rome, Italy, May 14, 2013. "Size Effects on Strength: the Role of Stochastic Processes During the Plastic Deformation of Materials

Containing a Limited Number of Dislocations", Nanomeasure 2013: The Third Scientific Symposium for Nanomeasurement Research, Warsaw, Poland, June 25-26, 2013 (Keynote Address with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Stochastic Processes and the Strength of Metals Containing a Limited Number of Dislocations", 2013 Gordon Research Conference on Physical Metallurgy, University of New England, Biddeford, ME, July 28 - August 2, 2013 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"A Simple Stochastic Model for Yielding in Specimens with a Limited Number of Dislocations", Nanoscale Multilayers 2013, Madrid, Spain, October 1-4, 2013 (with P.S. Phani, K.E. Johanns, and E.P. George).

"An Introduction to Nanoindentation", ECI Conference on Nanomechanical Testing in Materials Research and Development IV, Olhão, Algarve, Portugal, October 6-11, 2013 (with E.G. Herbert).

"A Simple Stochastic Model for Yielding in Specimens with a Limited Number of Dislocations", ECI Conference on Nanomechanical Testing in Materials Research and Development IV, Olhão, Algarve, Portugal, October 6-11, 2013 (with P.S. Phani, K.E. Johanns, and E.P. George).

"Probing the Mechanisms of Small-Scale Plasticity with Nanoindentation", Department of Mechanical Engineering, Auburn University, Auburn, AL, October 18, 2013.

"Probing the Mechanisms of Small-Scale Plasticity with Nanoindentation", Department of Mechanical Engineering, Clarkson University, Potsdam, NY, October 25, 2013.

"A Simple Stochastic Model for Yielding in Specimens with a Limited Number of Dislocations", Department of Aerospace Engineering and Engineering Mechanics, The University of Texas, Austin, TX, November 14, 2013.

"Deformation Anisotropy of HCP Single Crystals Under Nanoindentation", 2014 TMS Annual Meeting, San Diego, CA, February 16-20, 2014 (with Y.F. Gao, J. Kwon, M.J. Mills, D. Catoor, L. Li, and E.P. George).

"Size Effects on Strength: the Role of Stochastic Processes During the Plastic Deformation of Samples Containing a Small Number of Dislocations", Department of Materials Science and Engineering, Technical University of Darmstadt, Darmstadt, Germany, February 25, 2014.

"Size Effects on Strength: the Role of Stochastic Processes During the Plastic Deformation of Samples Containing a Small Number of Dislocations", European Workshop on Mechanical Characterization in Small Dimensions, Max Planck Institute for Iron and Steel Research, Dusseldorf, Germany, February 27-28, 2014 (keynote).

"Cracking in Brittle Materials During Nanoindentation: New Insights Gained from Cohesive Zone Finite Element Modeling", 2014 Spring Meeting of the Materials Research Society, San Francisco, CA, April 21-25, 2014 (with K.E. Johanns and Y.F. Gao).

"Probing the Mechanisms of Small-Scale Plasticity with Nanoindentation", Society of Experimental Mechanics Annual Conference and Exposition, Greenville, SC, June 2-5, 2014 (keynote address).

"Cracking Then, Cracking Now: Do We Really Understand Nanoindentation Cracking?", Nano 30: Thirty Years of Progress in Nanomechanical Instrumentation, Hawthorne Hotel, Salem, MA, July 18-20, 2014.

19

Invited Presentations (cont.) "Stochastic Processes and the Strength of Metals Containing a Limited Number of Dislocations", State

Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an, China, September 12, 2014 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Cracking in Brittle Materials During Nanoindentation: New Insights Gained from Cohesive Zone Finite Element Modeling", Nanomeasure 2014: The Fourth Scientific Symposium for Nanomeasurement Research, Beijing, China, September 16-17, 2014 (Keynote Address with K.E. Johanns and Y.F. Gao).

"Probing the Mechanical Behavior of Hard, Brittle Materials with Nanoindentation", Ohio State University, Department of Materials Science and Engineering, Columbus, Ohio, October 10, 2014.

"Smaller is Stronger? Exploring the Strange New World of Small-Scale Mechanical Behavior with Nanoindentation", William Mong Distinguished Lecture, University of Hong Kong, Hong Kong, October 29, 2014.

"Stochastic Processes and the Strength of Metals Containing a Limited Number of Dislocations", Department of Mechanical Engineering, Hong Kong University of Science and Technology, Hong Kong, October 31, 2014 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Stochastic Processes and the Strength of Metals Containing a Limited Number of Dislocations", Department of Mechanical Engineering, Hong Kong City University, Hong Kong, November 13, 2014 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Cracking in Brittle Materials During Nanoindentation: New Insights Gained from Cohesive Zone Finite Element Modeling", Clemson University, Department of Materials Science and Engineering, November 20, 2014 (with K.E. Johanns and Y.F. Gao).

"Indentation Contact Plasticity at Scales Near the Average Dislocation Spacing", 2014 Fall Meeting of the Materials Research Society, Boston, MA, November 30 - December 5, 2014 (with E.P. George, P.S. Phani, and K.E. Johanns).

"Probing the Mechanical Properties of Materials at Small Scales with Nanoindentation", NSF Workshop on the Role of Nanoindentation in Nanobiotechnology", University of Illinois NanoBio Node, Urbana-Champaign, Illinois, April 1-2, 2015.

"Case Studies in Nanoindentation: The World of Soft Materials", NSF Workshop on the Role of Nanoindentation in Nanobiotechnology", University of Illinois NanoBio Node, Urbana-Champaign, Illinois, April 1-2, 2015.

"Stochastic Processes and the Strength of Metals Containing a Limited Number of Dislocations", Department of Mechanical Engineering, Texas A&M University, College Station, TX, April 17, 2015 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Stochastic Processes and the Strength of Metals Containing a Limited Number of Dislocations", Department of Mechanical Engineering, Northwestern University, Evanston, IL, May 14, 2015 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Smaller is Stronger! Exploring the Strange New World of Small-Scale Mechanical Behavior with Nanoindentation", South Dakota Undergraduate Research Symposium, Pierre, South Dakota, July 29-30, 2015 (plenary presentation).

"Exploring the Strange New World of Small-Scale Mechanical Behavior with Nanoindentation", International Conference on Advances in Nanotechnology, Birmingham, England, June 9-10, 2015 (plenary presentation).

"Understanding the Mechanical Behavior of a FCC High-Entropy Alloy through its Various Equiatomic Subsidiary Alloys", 17th International Conference on Strength of Metals and Alloys, Brno, Czech Republic, August 9-14, 2015 (with Z. Wu, H. Bei, and E.P. George).

20

Invited Presentations (cont.) "Measurement of Power Law Creep Parameters by Instrumented Indentation Methods", XXIV

International Materials Congress, Cancun, Mexico, August 16-20, 2015 (with C. Su, E.G. Herbert, and W.C. Oliver).

"A Brief History of Nanoindentation", Symposium on Recent Progress in Plasticity and Phase Transformations, Ruhr University, Bochum, Germany, August 19-22, 2015.

"Multiscale Mechanical Properties and Alloy Design", DOE BES Mechanical Behavior and Radiation Effects PI Meeting, September 14-16, 2015, Gaithersburg, MD.

"Stochastic Processes and the Strength of Metals Containing a Limited Number of Dislocations", Department of Materials Science and Engineering, Michigan Technological University, Houghton, MI, September 29, 2015 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Cracking in Brittle Materials During Nanoindentation: New Insights Gained from Cohesive Zone Finite Element Modeling", ECI Conference on Nanomechanical Testing in Materials Research and Development V, October 4-9, 2015, Albufeira, Portugal (with Y.F. Gao and K.E. Johanns).

"Cracking in Brittle Materials During Nanoindentation: New Insights Gained from Cohesive Zone Finite Element Modeling", ECI Conference on Nanomechanical Testing in Materials Research and Development V, College of Engineering, University of Rome III, October 11, 2015, Rome, Italy (with Y.F. Gao and K.E. Johanns).

"Cracking in Brittle Materials During Nanoindentation: New Insights Gained from Cohesive Zone Finite Element Modeling", Department of Materials Science and Engineering, University of Illinois Urbana Champaign, October 19, 2015, Urbana-Champaign, Illinois (with Y.F. Gao and K.E. Johanns),

"Probing the Mechanical Behavior of Hard, Brittle Materials with Nanoindentation: Chapter II", Department of Materials Science and Engineering, Ohio State University, October 19, 2015, Columbus, Ohio (with W.C. Oliver and B.M. Mound).

"Smaller is Stronger: Exploring the Strange New World of Small-Scale Mechanical Behavior with Nanoindentation", Department of Materials Science and Engineering, Technical University of Darmstadt, Darmstadt, Germany, October 27, 2015.

"Exploring the Strange New World of Small-Scale Mechanical Behavior with Nanoindentation", International Symposium on Microstructure and Mechanical Properties of Advanced Metallic Materials, Erlangen, Germany, October 29-30, 2015.

"Measurement of Power-law Creep Parameters by Instrumented Indentation Methods", 5th International Indentation Workshop (IIW5), The University of Texas at Dallas, Dallas, TX, November 1-5, 2015 (plenary presentation with C. Su, E.G. Herbert, and W.C. Oliver).

"The Hardness and Elastic Modulus of Lithium and Solid Electrolytes for Next Generation Battery Applications", 5th International Indentation Workshop (IIW5), The University of Texas at Dallas, Dallas, TX, November 1-5, 2015 (with E.G. Herbert, P.S. Phani, A. Sharafi, T. Thompson, J. Sakamoto, and N.J. Dudney).

"Smaller is Stronger: Exploring the Strange New World of Small-Scale Mechanical Behavior with Nanoindentation", Department of Physics, Australian National University, Canberra, Australia, February 5, 2016.

"Cracking in Brittle Materials During Nanoindentation", International Conference on Nanoscience and Nanotechnology - ICONN 2016, February 7-11, 2016, Canberra, Australia (with Y.F. Gao and K.E. Johanns).

"Cracking in Brittle Materials During Nanoindentation", 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF 43), April 25-29, 2016, San Diego, CA (with Y.F. Gao and K.E. Johanns).

21

Invited Presentations (cont.) "Cracking in Brittle Materials During Nanoindentation: New Insights Gained from Cohesive Zone Finite

Element Modeling", 17th International Conference on Experimental Mechanics (ICEM 17), July 3-7, 2016, Rhodes, Greece (Keynote presentation with Y.F. Gao and K.E. Johanns).

"Smaller is Stronger: Exploring the Strange New World of Small-Scale Mechanical Behavior with Nanoindentation", Department of Physics, Sichuan University, Chengdu, China, September 28, 2016.

"A Brief History of Nanoindentation", Oak Ridge Chapter of the American Society for Materials (ASM), Oak Ridge, TN, October 20, 2016.

"Measurement of Power Law Creep Parameters by Nanoindentation", Department of Materials Science and Engineering, Northwestern University, Evanston, IL, February 21, 2017.

"Exploring the Unusual World of Small-Scale Mechanical Behavior with Nanoindentation", Materials Science & Engineering Symposium, Doha, Qatar, March 16, 2017 (Keynote presentation).

"From Pop-in to Pillars: Nanomechanical Research at Texas A&M University", Department of Materials Science & Engineering, Texas A&M University, Doha, Qatar, March 13, 2017.

"Exploring the Unusual World of Small-Scale Mechanical Behavior with Nanoindentation", Werkstoffforschung für Wirtsschaft und Gesellschaft Metallkunde Kolloquim, Lech am Arlberg, Austria, April 19-21, 2017 (Keynote presentation).

22

Other Public Presentations - G.M Pharr

"Application of the Methods of Dislocation Dynamics to Describe Plastic Flow in BCC and FCC Metals", Annual Meeting of the Metallurgical Society of AIME, Denver, February 1978 (with W.D. Nix).

"A Numerical Study of Cavity Growth Controlled by Surface Diffusion", Annual Meeting of the Metallurgical Society of AIME, New Orleans, February 1979 (with W.D. Nix).

"Liquid Phase Enhanced Creep in Potassium Chloride", Annual Meeting of the Metallurgical Society of AIME, Dallas, February 1982.

"The Effects of Temperature, Stress, and Salinity on the Creep of Frozen Saline Soil", ASME Third International Offshore Mechanics and Arctic Engineering Symposium, New Orleans, February 1984 (with M.S. Nixon).

"A Technique for Producing Ice from NaCl Brine for Studying Fundamental Deformation Behavior", ASME Fourth International Offshore Mechanics and Arctic Engineering Symposium, Dallas, February 1985 (with P.S. Godavarti).

"Creep of Solids Containing Liquid Phases", Annual Meeting of the Metallurgical Society of AIME, New Orleans, February 1986 (with B.L. Vaandrager and P.S. Godavarti).

"A Compilation and Analysis of Data for the Stress Dependence of the Subgrain Size", First International Conference on Low Energy Dislocation Structures, University of Virginia, Charlottesville, August 1986 (with S.V. Raj).

"Creep and Substructural Studies in NaCl Single Crystals", Fall Meeting of the Metallurgical Society of AIME, Cincinnati, October 1987 (with S.V. Raj).

"High Temperature Creep Deformation of a Rapidly Solidified Al-Fe-V-Si Alloy", Annual Meeting of the Metallurgical Society of AIME, Phoenix, January 1988 (with M.S. Zedalis, P.S. Gilman, and D.J. Skinner).

"Elastic Displacement During Indentation of Ceramics and Glasses", 90th Annual Meeting of the American Ceramic Society, Cincinnati, May 1988 (with W.C. Oliver).

"Surface Mechanical Properties of Ti Alloys Produced by Excimer Laser Mixing of Ti on AISI 304 Stainless Steel", Annual Meeting of the Materials Research Society, Boston, December 1988 (with T.R. Jervis, J.-P. Hirvonen, M. Nastasi, T.G. Zocco, J.A. Martin, and W.C. Oliver).

"On the Stability of the Creep Substructure in NaCl Single Crystals", Second International Conference on Low Energy Dislocation Structures, University of Virginia, Charlottesville, August 1989 (with S.V. Raj and J.D. Whittenberger).

"Cracking During Indentation and Its Manifestations in Indentation Load-Displacement Curves", Southwest Research Institute, San Antonio, September 1989.

"The Mechanical Behavior of Silicon During Small Scale Indentation", Fall Meeting of the Metallurgical Society of AIME, Indianapolis, October 1989 (with W.C. Oliver and D.R. Clarke).

"Direct Observation of Indentation Cracking in Brittle Materials", Annual Meeting of the American Ceramic Society, Dallas, April 1990 (with R.F. Cook).

"Effects of Liquid Phases on Interfacial Sliding in NaCl Crystals", Annual Meeting of the American Ceramic Society, Dallas, April 1990 (with T. Baykara).

"Nanoindentation of Nb/MoSi2 Microlaminate Films", International Conference on Metallurgical Coatings and Thin Films, San Diego, April 1992 (with T.Y. Tsui, T.C. Chou, and T.G. Nieh).

"Fracture During Nanoindentation", Fourth Annual Meeting of the South Texas Fracture Mechanics Discussion Group, College Station, TX, February 1993 (with W.C. Oliver and D.S. Harding).

23

Other Public Presentations (cont.) "An Explanation for the Shape of Nanoindentation Unloading Curves Based on Finite Element

Simulation", Fall Meeting of the Materials Research Society, Boston, MA, December 1994 (with A. Bolshakov and W.C. Oliver).

"Effects of Interlayers on the Scratch Adhesion Performance of Ultra-Thin Films of Copper and Gold on Silicon Substrates", Fall Meeting of the Materials Research Society, Boston, MA, December 1994 (with S.D. McAdams, T.Y. Tsui, and W.C. Oliver).

"Cracking During Nanoindentation and Its Use in the Measurement of Fracture Toughness", Fall Meeting of the Materials Research Society, Boston, MA, December 1994 (with D.S. Harding and W.C. Oliver).

"Nanoindentation and Nanoscratching of Hard Coating Materials for Magnetic Disks", Fall Meeting of the Materials Research Society, Boston, MA, December 1994 (with T.Y. Tsui, W.C. Oliver, Y.W. Chung, E.C. Cutiongo, C.S. Bhatia, R.L. White, R.L. Rhodes, and S.M. Gorbatkin).

"Nanoindentation and Nanoscratching of Hard Carbon Coatings for Magnetic Disks", Spring Meeting of the Materials Research Society, San Francisco, CA, April 1995 (with T.Y. Tsui, W.C. Oliver, C.S. Bhatia, R.L. White, S. Anders, A. Anders, and I.G. Brown).

"Mechanical Properties of Films Prepared by Cathodic Arc Deposition", Spring Meeting of the Materials Research Society, San Francisco, CA, April 1995 (with S. Anders, A. Anders, J.W. Ager, III, Z. Wang, T.Y. Tsui, I.G. Brown, and C.S. Bhatia ).

"Measurement of Residual Stress with Nanoindentation", 1996 Annual Meeting of the American Ceramic Society, Indianapolis, IN, April 1996 (with K. Jakus, S. Widjaja, R. Atri, T.Y. Tsui, and N. Evans).

"Finite Element Studies of the Influence of Pile-up on the Analysis of Nanoindentation Data", 1996 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1996 (with A. Bolshakov and W.C. Oliver).

"Indenter Geometry Effects on the Measurement of Mechanical Properties by Nanoindentation with Sharp Indenters", 1996 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1996 (with T.Y. Tsui and W.C. Oliver).

"Inaccuracies in Sneddon's Solution for Elastic Indentation by a Rigid Cone and Their Implications for Nanoindentation Data Analysis", 1996 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1996 (with A. Bolshakov).

"Nanoindentation of Soft Films on Hard Substrates - the Importance of Pile-up", 1996 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1996 (with T.Y. Tsui and W.C. Oliver).

"Understanding Time Dependent Deformation During Indentation Testing", 1996 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1996 (with B.N. Lucas, W.C. Oliver, and J.-L. Loubet).

"Mechanical Properties of Dog Aorta Based on Nanoindentation Tests", 1996 ASME Conference on Mechanics and Materials, Johns Hopkins University, Baltimore, MD, June 1996 (with E.N. Glaser, J.F. Cornhill, P.M. Anderson, T.Y. Tsui, and E.E. Herderick).

"The Mechanical Properties Microprobe", 1996 ASME Conference on Mechanics and Materials, Johns Hopkins University, Baltimore, MD, June 1996 (with W.C. Oliver, B.N. Lucas, and J.-L. Loubet).

"Finite Element Studies of Indentation in Ceramics and Glasses by a Rigid Conical Indenter", 1996 Fall Meeting of the American Ceramic Society, San Antonio, TX, October 1996 (with A. Bolshakov).

"Measurement of Mechanical Properties of Human Bone Using Nanoindentation Techniques", 1996 Fall Meeting of the American Ceramic Society, San Antonio, TX, October 1996 (with T.Y. Tsui and J.-Y. Rho).

24

Other Public Presentations (cont.) "Variation of Young's Modulus and Hardness in Human Lumbar Vertebrae Measured by

Nanoindentation", 1996 Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, GA, November 1996 (with M. Roy, J.-Y. Rho, and T.Y. Tsui).

"Young's Modulus and Hardness of Trabecular and Cortical Bone in Various Directions Determined by Nanoindentation", 43rd Annual Meeting of the Orthopaedic Research Society, San Francisco, CA, February 1997 (with J.-Y. Rho, M.E. Roy, and T.Y. Tsui).

"Indentation of Arterial Tissue", Workshop on Biomaterials and Tissue Engineering sponsored by the Institute for Mechanics and Materials, Hilton Head, SC, February 1997 (with E.N. Glaser, P.M. Anderson, B.N. Lucas, and J.F. Cornhill).

"Effects of Adhesion on the Measurement of Thin Film Mechanical Properties by Nanoindentation", 1997 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1997 (with T.Y. Tsui and C.A. Ross).

"Substrate Effects on the Measurement of Metallic Thin Film Hardness by Nanoindentation", 1997 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1997 (with T.Y. Tsui and C.A. Ross).

"Multilayers of Amorphous Carbon Prepared by Cathodic Arc Deposition", 1997 International Conference on Metallurgical Coatings and Thin Films, San Diego, April 1997 (with S. Anders, D.L. Callahan, T.Y. Tsui, and C.S. Bhatia).

"Heat Treatment of Cathodic Arc Deposited Amorphous Carbon Films", 1997 International Conference on Metallurgical Coatings and Thin Films, San Diego, April 1997 (with S. Anders, Joel W. Ager III, T.Y. Tsui, and I.G. Brown).

"Mechanical Characterization of b-Silicon Nitride Using Nanoindentation", 1997 Spring Meeting of the American Ceramic Society, Cincinnati, OH, May 1997 (with J.C. Hay, E.Y. Sun, P.F. Becher, and K.B. Alexander).

"Nanoindentation Determination of Elastic Modulus and Hardness of PYC Samples", 23rd Biennial Conference on Carbon, Penn State University, State College, PA, July 1997 (with G. Hofmann, M Wiedenmeier, M. Freund, and A. Beaven).

"Critical Issues in Measuring the Mechanical Properties of Hard Films on Soft Substrates by Nanoindentation Techniques", 1997 Fall Meeting of the Materials Research Society, Boston, MA, December 1997 (with J.C. Hay).

"Using the Ratio of Loading and Unloading Stiffnesses to Characterize Elastic Recovery During Indentation", 1998 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1998 (with J.L. Hay, W.C. Oliver, and A. Bolshakov).

"The Sneddon Solution and Its Application to Nanoindentation Data Analysis", 1998 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1998 (with J.C. Hay and A. Bolshakov).

"An Experimental Assessment of Indenter Angle and Poisson Ratio Effects on Property Measurements by Nanoindentation", 1998 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1998 (with J.C. Hay).

"Pile-Up Behavior of Spherical Indentations in Engineering Materials", 1998 Spring Meeting of the Materials Research Society, San Francisco, CA, April 1998 (with B. Taljat and T. Zacharia).

"Elastic Properties of Osteon and Trabecular Bone Measured by Nanoindentation", 11th Conference of the European Society of Biomechanics, Toulouse, France, July 1998 (with J.-R. Rho and T.Y. Tsui).

25

Other Public Presentations (cont.) "Mechanical Characterization of the Microstructural Components of Human Bone by Nanoindentation",

Conference on the Impact of Emerging Technologies on Health Care in the 21st Century, Knoxville, TN, December 1998 (with J.-Y. Rho).

"The Sneddon Solution and Its Application to Nanoindentation Data", Society of Engineering Mechanics Conference on Theoretical, Experimental and Computational Mechanics, Cincinnati, OH, June 1999 (with J.C. Hay).

"On the Measurement of Residual Stress by Load and Depth Sensing Indentation", Engineering Foundation Conference on Mechanical Properties of Films, Coatings and Interfacial Materials, Il Ciocco, Italy, June 1999 (with B. Taljat and F. Kosel).

"Indentation of Elastically Anisotropic Half-spaces", 36th Annual Meeting of the Society of Engineering Science, Austin, TX, October 1999 (with J.G. Swadener).

"The Relationship Between Microstructure and the Nanoindentation Properties of Intramuscular Herring Bones", Augustusburg Conference of Advanced Science: Mechanical Properties of Cells and Tissues, Saxony, Germany, October 1999 (with J.-Y. Rho), extended abstract published in Proc. Augustusburg Conf. Adv. Sci.: Mech. Properties of Cells and Tissues, Saxony, Germany, Oct. 11-13, 1999, pp. 37-39.

"Measurement of Residual Stresses by Load and Depth Sensing Spherical Indentation", 1999 Fall Meeting of the Materials Research Society, Boston, MA, December 1999 (with B. Taljat).

"A Methodology for the Calibration of Spherical Indenters", 1999 Fall Meeting of the Materials Research Society, Boston, MA, December 1999 (with J.G. Swadener).

"Correlations Between Osteocalcin Content, Degree of Mineralization, and Mechanical Properties of C. Carpio Rib Bone, 24th Annual Meeting of the American Society of Biomechanics, Chicago, IL, July 19-22, 2000 (with M.E. Roy, J.-Y. Rho, and S.K. Nishimoto), extended abstract published in Transactions of the 24th Annual Meeting of the American Society of Biomechanics, Chicago, IL, July 19-22, 2000, p13-14.

"Nanoindentation Results from Direct Molded vs. Machined UHMWPE Tibial Bearings", 6th World Biomaterials Congress, Kamuela, HA, May 2000 (with M.A. Schmidt, D.C. Joy, J.G. Swadener, and J.C. Higgins, extended abstract published in Transactions of the Sixth World Biomaterials Congress, Volume III of III, Society for Biomaterials, Minneapolis, MN, U.S.A., p. 1255 (2000).

"Nanoindentation and Nanoscratching of Silicon Carbide Alloyed Pyrolytic Carbon", 2000 Fall Meeting of the Materials Research Society, Boston, MA, December 2000 (with M.A. Wiedenmeier and S.G. Thomas).

"Yielding and the Indentation Size Effect in Iridium", 2000 Fall Meeting of the Materials Research Society, Boston, MA, December 2000 (with J.G. Swadener and E.P. George).

"On the Measurement of Stress-Strain Curves by Spherical Indentation", 2000 Fall Meeting of the Materials Research Society, Boston, MA, December 2000 (with E.G. Herbert, W.C. Oliver, and B.N. Lucas).

"X-Ray Microbeam Investigation of the Deformation Microstructure Under Copper Indents", 2000 Fall Meeting of the Materials Research Society, Boston, MA, December 2000 (with W. Yang, B.C. Larson, G.E. Ice, J.Z. Tischler, J.D. Budai,, K.-S. Chung, N. Tamura, and W.L. Lowe).

"Using Indentation and Intra-vascular Ultrasound to Measure Arterial Response”, 2000 Fall Meeting of the Materials Research Society, Boston, MA, December 2000 (with P.M. Anderson, E. Glaser, A.I. Veress, G. Vince, and J.F. Cornhill).

26

Other Public Presentations (cont.) "Anisotropic Nanoindentation Properties of Human Cortical Bone", 47th Annual Meeting of the

Orthopaedic Research Society, San Francisco, CA, February 2001 (with Z. Fan, J.G. Swadener, J.-Y. Rho, and M. Roy).

"Microstructure and the Nanoindentation Properties of Intramuscular Herring Bones", 47th Annual Meeting of the Orthopaedic Research Society, San Francisco, CA, February 2001 (with J.-Y. Rho, S. Mishra, K. Chung, and J. Bai).

"Long Bones from the Senescence Accelerated Mouse SAMP6 Have Normal Elastic and Yield Properties but Reduced Resistance to Fracture", 47th Annual Meeting of the Orthopaedic Research Society, San Francisco, CA, February 2001 (with M.J. Silva, M.D. Brodt, Z. Fan, and J.-Y. Rho).

"Materials Characterization via the SHARED Research Equipment User Facility and Program”, 2001 Spring Meeting of the Materials Research Society, San Francisco, CA, April 2001 (with N.D. Evans, I.M. Anderson, J. Bentley, E.A. Kenik, and M.K. Miller).

"The Correlation of the Indentation Size Effect", Engineering Foundation Conference on Nanostructured Materials, Il Ciocco, Italy, June, 2001 (with J.G. Swadener and E.P. George).

"Finite Element Simulations of Spherical Indentations in Elastic-perfectly-plastic Materials", 2nd European Symposium on Nanomechanical Testing, Huckelhoven, Germany, September 2001 (with K. Durst, M. Goeken, and J.G. Swadener).

"Assessment for a New Relation for the Elastic Compliance of a Film-Substrate System", 2001 Fall Meeting of the Materials Research Society, Boston, MA, November 2001 (with A. Rar and H. Song).

"The Correlation of the Indentation Size Effect: Experiments with Pyramidal and Spherical Indenters", 2001 Fall Meeting of the Materials Research Society, Boston, MA, November 2001 (with J.G. Swadener and E.P. George).

"Formation of Nano-sized Grains and Layered Structure in Y2O3 Dispersed Fe-Cr Alloys During Ball Milling", Symposium on High-Speed Plastic Deformation, Hiroshima Institute of Technology, Hiroshima, Japan, December 2001 (with D.H. Hoelzer, S.J. Zinkle, and M. K. West).

"Effects of Solidification Parameters on Lamellar Microstructures of Near Eutectic Cr-Cr3Si Alloys", Fall Meeting of the Materials Research Society, Boston, MA, December 2002 (with H. Bei and E.P. George).

"Microstructure and Oxidation of a Cast Nickel Aluminide Alloy", Fall Meeting of the Materials Research Society, Boston, MA, December 2002 (with D.Y. Lee, M.L. Santella, and I.M. Anderson).

"Nanoindent Deformation Microstructure Investigation Using 3D Structural Microscopy", Fall Meeting of the Materials Research Society, Boston, MA, December 2002 (with W. Yang, B.C. Larson, C.M. Lepienski, J.D. Budai, J.Z. Tischler, and W. Liu).

"Determination of Thin Film Mechanical Properties with AFAM", SPIE Symposium on Testing, Reliability, and Application of Micro- and Nano- Material Systems, San Diego, CA, March 2003 (with D.C. Hurley, K. Shen, J.A. Turner, and A. Rar).

"Increasing Initial Yield Stress at Small Length Scales", 2003 Spring Meeting of the Materials Research Society, San Francisco, CA, April 2003 (with I. Spary, A.J. Bushby, and N.M. Jennett)

"Nanoindentation with Spherical Indenters: Finite Element Studies of Deformation in the Elastic-Plastic Transition Regime", International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, April 2003 (with Y.J. Park).

"Ductile Machining Phenomena of Nominally Brittle Materials at the Nanoscale", Fourth International Conference on Intelligent Processing and Manufacturing of Materials, Sendai, Japan, May 2003 (with J. Patten, R.J. Hocken, H.P. Cherukuri, R.O. Scattergood, and N. Hirata).

27

Other Public Presentations (cont.) “Material Property Evaluation of Hyper-elastic Rubber by Microindentation”, 2003 Annual Meeting of

the Society of Experimental Mechanics, Charlotte, NC, July 2003 (with H. Lee and S.H. Nahm). “UV Raman Scattering in SiC Indents”, Annual Conference of the American Society for Precision

Engineering, Portland, Oregon, October 2003 (with J.J. Huening, J.-I. Jang, X. Chen, L. Bergman, and R.J. Nemanich).

“Preparation of Ternary Alloy Libraries for High-throughput Screening of Material Properties by Means of Thick Film deposition and Interdiffusion: Benefits and Limitations”, Annual Meeting of the American Vacuum Society, Baltimore, MD, November 2003 (with A. Rar, E.D. Specht, and E.P. George).

"Preparation of Ternary Alloy Libraries by Means of Thick Film Deposition and Interdiffusion: Structure of the Resulted Layer", Fall Meeting of the Materials Research Society, Boston, MA, December 2003 (with A. Rar, E.D. Specht, H. M. Meyer, and E.P. George).

"Nonequilibrium Structures in Codeposited Cr-Fe-Ni Films", Fall Meeting of the Materials Research Society, Boston, MA, December 2003 (with E.D. Specht, P.D. Rack, A. Rar, E.P. George, and H. Hong).

"Processing, Microstructures and Mechanical Properties of Directionally Solidified V-V3Si in situ Composites, 2004 TMS Annual Meeting & Exhibition, Charlotte, March 2004 (with H. Bei and E.P. George).

"In-situ Neutron Diffraction Studies of Directionally Solidified NiAl-Mo Fibrous Composites During Tensile Loading", 2004 TMS Annual Meeting & Exhibition, Charlotte, March 2004 (with H. Bei, E. P. George, H. Choo, and D.W. Brown).

"Control of Friction at the Atomic Scale", DOE Workshop on Friction and Tribology at the Atomic Scale, Oak Ridge TN, March 2004 (with Y. Braiman, J. Barhen, S. Jeon, V. Protopopescu, A. Rar,, and T. Thundat).

"On the Evaluation of Stresses During Nanoindentation with Sharp Indenters", International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, April 2004 (with N. Schwarzer).

"Scanning Acoustic Microscopy for Non-destructive Evaluation of Subsurface Characteristics", 6th International Conference on Frontiers of Design and Manufacturing, Xi'an, China, June 2004 (with J. Qu, P.J. Blau, A.J. Shih, S.B. McSpadden Jr., and Jae-il Jang).

"Characterization of Nanoindentations in Silicon by Cross-sectional TEM", Annual Meeting of the American Microscopy Society, Savannah, GA, August 2004 (with S. Wen, J.-I. Jang, T.Y. Tsui, J. Bentley, and I.M. Anderson).

"An Experimental Evaluation of the Constant b Relating the Contact Stiffness to the Contact Area in Nanoindentation", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with J. Strader and W.C. Oliver).

"On the Measurement of Creep by Nanoindentation with Continuous Stiffness Measurement", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with A. Rar and D. Goldsby).

"On the Measurement of Material Creep Parameters by Nanoindentation", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with J.A. LaManna and W.C. Oliver).

"Micro-Raman Mapping and Analysis of Indentation-Induced Phase Transformations in Germanium", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with Jae-il Jang, M.J. Lance, and S. Wen).

28

Other Public Presentations (cont.) "Cross Sectional TEM Studies of Indenter Angle Effects on Indentation-induced Phase Transformations

in Si and Ge", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with Songqing Wen, J. Bentley, Jae-il Jang, and T Y. Tsui).

"UV Raman Scattering Analysis of Indented and Machined 6H-SiC and a-Si3N4 Surfaces", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with J.J.H. Walter, M. Liang, X.-B. Chen, J.-I. Jang, L. Bergman, J.A. Patten, and R.J. Nemanich).

"Fundamental Investigation of Deformation and Plasticity by Combining Nanoindentation and 3-D X-ray Structural Microscopy", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with W. Yang, B.C. Larson, J.Z. Tischler, J.D. Budai, C. Rouleau, and G.E. Ice).

"A Critical Examination of the Actual Contact Area Used in Analyzing Nanoindentation Data Based on 3D Finite Element Modeling", 2004 Fall Meeting of the Materials Research Society, Boston, MA, November 2004 (with S. Shim and W.C. Oliver).

"Rapid Analysis of Ternary Phase Diagrams Using Synchrotron X-ray Diffraction and Fluorescence", 3rd Japan-US Workshop on Combinatorial Materials Science and Technology, Okinawa, Japan, December 2004 (with E.D. Specht, A. Rar, P.D. Rack, E.P. George, J.D. Fowlkes, H. Hong, and E. Karapetrova).

"Thin Film Synthesis of BMG Alloys for Coatings and Combinatorial Alloy Design", 4th International Conference on Bulk Metallic Glasses, Gatlinburg, TN, May 1-5, 2005 (with D.A. Smith, Y. Deng, J.D. Fowlkes, P.D. Rack, L.H. VanBebber, F. Liu, C.L. Chiang, J. Wu, P.K. Liaw, and C.T. Liu).

"Determination of Contact Area During Small-Scale Friction Experiments by Means of Continuous Stiffness Measurements", World Tribology Congress III, Washington DC, September 12-16, 2005 (with A. Rar, Y.Y. Braiman, W.C. Oliver, D.L. Goldsby, and T.E. Tullis).

"A Method for Making Substrate-Independent Measurements of Thin Film Elastic Moduli by Nanoindentation", McMat 2005: ASME Conference on Mechanics and Materials, Baton Rouge, La, June 1-3, 2005 (with H. Xu).

"Finite Element Studies of Conical Indentation Creep for a Power Law Creeping Solid" McMat 2005: ASME Conference on Mechanics and Materials, Baton Rouge, La, June 1-3, 2005 (with S. Sohn and W.C. Oliver).

"Indentation Size Effect on Spherical Indentation in Iridium: A Study via the Conventional Theory of Mechanism-Based Strain Gradient Plasticity" McMat 2005: ASME Conference on Mechanics and Materials, Baton Rouge, La, June 1-3, 2005 (with Y. Huang, S. Qu, and K.-C. Hwang).

"Structure-Property Relationships in the Loblolly Pine Cell Wall: Interaction With Synthetic Polymers, XVII International Botanical Congress, Vienna, Austria, July 17-23, 2005 (with T. G. Rials, W. Tze, S. Wang, and S. Kelley).

"Characterization of Interfacial Properties Between Cellulose Fiber and Thermoplastic by AFM and Nanoindentation", Annual Meeting of the American Chemical Society, Washington, DC, August 2005 (with S.-H. Lee and S. Wang).

"Determination of Contact Area During Small-Scale Friction Experiments by Means of Continuous Stiffness Measurements", World Tribology Congress III, Washington, DC, September 12-16, 2005 (with A. Rar, Y.Y, Braiman, W.C. Oliver, D. Goldsby, D.L. Goldsby, and T.E. Tullis).

"Thermal Expansion Behavior of a Directionally Solidified NiAl-Mo Composite Investigated by Neutron Diffraction and Dilatometry", MECA SENS III Conference on Stress Evaluation, Santa Fe, NM, October 17-19, 2005 (with H. Bei, E. P. George, D.W. Brown, H. Choo, W.D. Porter, and M.A.M. Bourke).

29

Other Public Presentations (cont.) "An Experimental Evaluation of the Constant b Relating the Contact Stiffness to the Contact Area in

Nanoindentation", ECI Conference on Instrumented Indentation Testing in Materials Research and Development, Fodele Beach, Crete, October 9-14, 2005 (with J. Strader and W.C. Oliver).

"Measurements of Local Piezoelectric Response of Materials During Nanoindentation", 2005 Fall Meeting of the Materials Research Society, Boston, MA, November 2005 (with A. Rar, W.C. Oliver, and S.V. Kalinin).

"Time-dependent Nano-mechanical Properties of Regenerated Cellulose Fiber and Wood Cell Wall by Continuous Nanoindentation Technique", Annual Meeting of the American Chemical Society, Atlanta, GA, March 26-30, 2006 (with S.-H. Lee and S. Wang).

"A Model of Indentation Size Effects in Nanoindentation", 43rd Annual Meeting of the Society of Engineering Science, April, 2006 (with Y. Huang, F. Zhang, K.-C. Hwang, W.D. Nix, and G. Feng).

"Nanoindentation as a Tool For Understanding Nano-mechanical Properties of Cell Walls and Bio-composites", 2006 International Conference on Nanotechnology, Atlanta, GA, April 26-28, 2006 (with S. Wang, S.H. Lee, W.T.Y. Tze, and T.G. Rials).

"Synthesizing Intermetallic Composites with Well-Controlled Microstructures and Understanding Their Small Scale Mechanical Behavior", 2006 DOE/BES Mechanical Behavior Contractors Meeting, San Antonio, TX, June 2006 (with H. Bei, J.A. Horton, and E.P. George).

"Indentation Rate Effects on Pop-out in Silicon Studied by Cross-sectional TEM", International Microscopy Conference, Japan, August 2006 (with S. Wen, J. Bentley, and J.-I. Jang).

"Effect of Refining on Nano-mechanical Properties of MDF Fibers", Annual Meeting of the Forest Product Society, 2007 (with C. Xing, S. Wang, and S.-H. Lee)

"Effect of Coupling Agent on Interphase Between Natural Fiber and Thermoplastic by Nanoindentation", Annual Meeting of the Forest Product Society, 2007 (with S.-H. Lee and S. Wang).

"Indentation Size Effect in Spherical and Pyramidal Indentations", Workshop on Small-scale Mechanical Behavior, Cambridge, UK, 2007 (with K. Durst and M. Goekin).

"Nanoindentation and the Dynamic Characterization of Viscoelastic Solids", Workshop on Small-scale Mechanical Behavior, Cambridge, UK, 2007 (with E.G. Herbert and W.C. Oliver).

"Contact Stiffness and Incipient Plasticity Studied by Multidimensional Nanocontact Experiments", 2007 Fall Meeting of the Materials Research Society, Boston, MA, November 2007 (with Y.F. Gao and W.C. Oliver).

"Influence of Pre-existing Dislocation Density on Nanoindentation Pop-in Events in Single Crystal Ni", 2007 Fall Meeting of the Materials Research Society, Boston, MA, November 2007 (with S. Shim, H. Bei, Y.F. Gao, and E.P. George).

"Mechanical Behavior of Micro-Pillars Synthesized by Directional Solidification Plasticity 2008, Kona, Hawaii (with H. Bei, S. Shim, M.K. Miller, and E.P. George).

"Multiscale Mechanical Properties and Alloy Design", 2008 DOE Contractors Meeting, Washington, DC, April 2008 (with E.P. George, H. Bei, J.R. Morris, C.T. Liu, J.A. Horton, and Y. Gao).

"A Finite Element Model of Indentation Fracture", 33rd International Conference & Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 2009 (with K. Johanns)

"Measuring the Elastic Modulus and Residual Stress of Free-standing Thin Films Using Nanoindentation Techniques", ECI Conference on Nanomechanical Testing in Materials Research and Development, Barga, Italy, October 2009 (with E.G. Herbert, W.C. Oliver, and M.P. de Boer).

30

Other Public Presentations (cont.) "Nanoindentation and the Mechanical Characterization of Viscoelastic Solids", ECI Conference on

Nanomechanical Testing in Materials Research and Development, Barga, Italy, October 2009 (with E.G. Herbert and W.C. Oliver).

"Probing the Mechanisms of Small-Scale Plasticity by Nanoindentation Pop-in and Micro-Pillar Compression Testing", ECI Conference on Nanomechanical Testing in Materials Research and Development, Barga, Italy, October 2009 (with S. Shim, H. Bei, Y.F. Gao, and E.P. George).

"A Stochastic Model for Yielding in Specimens with Limited Numbers of Dislocations", 2011 Spring Meeting of the Materials Research Society, San Francisco, CA, April 2011 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"SEM-Based In-Situ Tensile Testing of Single Crystal Molybdenum Alloy Fibers", 2011 Spring Meeting of the Materials Research Society, San Francisco, CA, April 2011 (with K.E. Johanns, A. Sedlmayr, P. Sudharshan Phani, O. Kraft, and E.P. George).

"Crystallographic Dependence and Indenter Radius Effects in Nanoindentation Pop-in Tests of NiAl and Mo Single Crystals", 2011 Spring Meeting of the Materials Research Society, San Francisco, CA, April 2011 (with T. Li, H. Bei, J.R. Morris, E.P. George, and Y.F. Gao).

"A Simple Stochastic Model for Yielding in Specimens with a Limited Number of Dislocations", ECI Conference on Nanomechanical Testing in Materials Research and Development, Lanzarote, Canary Islands, Spain, October 9-14, 2011 (with P. Sudharshan Phani, K.E. Johanns, and E.P. George).

"Analysis of Dislocation Structures Underneath Nanoindents in an a-Ti Alloy", TMS Annual Meeting, Orlando, FL, March 11-15, 2012 (with J. Kwon, P. Sudharshan Phani, M.C. Brandes, and M.J. Mills).

"Interpreting Hardness Data in Multilayer Thin Films", TMS Annual Meeting, Orlando, FL, March 11-15, 2012 (with M.D. Gram and P.M. Anderson).

"A New Methodology for the Analysis of Fracture Toughness and Residual Stress in Thin Hard Coatings", International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, April 29 - May 3, 2013 (with M. Sebastiani, E. Bemporad, and E.G. Herbert).

"On the Measurement of Energy Dissipation Using Geometrically Similar Nanoindentation and the Continuous Stiffness Measurement Technique", ECI Conference on Nanomechanical Testing in Materials Research and Development IV, Olhão, Algarve, Portugal, October 6-11, 2013 (with E.G. Herbert and R.C. Singleton).

"Advances in Measuring Power-Law Creep Parameters from Instrumented Indentation", ECI Conference on Nanomechanical Testing in Materials Research and Development IV, Olhão, Algarve, Portugal, October 6-11, 2013 (with E.G. Herbert and W.C. Oliver).

"A New Method to Investigate the Fracture Toughness of Thin Films", ECI Conference on Nanomechanical Testing in Materials Research and Development IV, Olhão, Algarve, Portugal, October 6-11, 2013 (with M. Sebastiani, E. Bemporad, F. Carassiti, and E.G. Herbert).

"Measurement of Fracture Toughness in Small Volumes by the Indentation Pillar splitting Tests: In-Situ Measurements on Thin Films and Bulk Metallic Glasses", MSE 2014, September 23-25, Darmstadt, Germany (with M. Sebastiani, K.E. Johanns, and E.G. Herbert).

"Synthesis of Metastable Si and Ge Structures via High Pressure Indentation", Joint AIRAPT-25 & EHPRG-53 International Conference On High Pressure Science And Technology, August 30 - September 4, 2015, Madrid, Spain (with B. Haberl, J.E. Bradby, and J.S. Williams).

" Effects of Lithiation on the Fracture Toughness and Mechanical Properties of LiMn2O4 Cathode Battery Materials", ECI Conference on Nanomechanical Testing in Materials Research and Development V, October 4-9, 2015, Albufeira, Portugal (with M. Sebastiani, K. E. Johanns, and Hugues-Yanis Amanieu).

31

Other Public Presentations (cont.) "Influence of Indenter Angle on Small-scale Cracking in Fused Quartz During Nanoindentation", 2015

Fall Meeting of the Materials Research Society, Boston, MA, December 2015 (with B.A. Mound). "Mechanical Characterization of Solid Acid Materials for Intermediate Temperature Fuel Cells", TMS

2016: 145th Annual Meeting & Exhibition, Nashville, TN, February 14-18, 2016 (with R. Ginder). "Mechanical Properties of Candidate Materials for High Temperature Nanoindentation Tips", 43rd

International Conference on Metallurgical Coatings and Thin Films (ICMCTF 43), April 25-29, 2016, San Diego, CA (with K.E. Johanns, W.C. Oliver, P.S. Phani, J.E. Swindeman, and L.A. Boatner).

"Constitutive Modeling of Indentation Cracking in Fused Silica", MSE 2016: Material Science and Engineering Conference, September 27-29, 2016, Darmstadt, Germany (with S. Bruns, K. E. Johanns, H. Rehman1, and K. Durst).

"Atomic Scale Dynamics of Screw Dislocation Motion in Ni and an Equiatomic Ni-Fe Alloy", 2016 Fall Meeting of the Materials Research Society, Boston, MA, November 2016 (with Y.N. Osetsky and J.R. Morris).

"Observations of Surface and Sub-surface Cracks in Fused Quartz Using Nanoinentation and Focused Ion Beam Milling", 41st International Conference and Expo on Advanced Ceramics and Composites, January 22-27, 2017, Daytona Beach, FL (with B.A. Mound).

“STEM Characterization of the Deformation Substructure of a NiCoCr Equiatomic Solid Solution Alloy”, Microscopy & Microanalysis 2017, August 6-10, 2017, St. Louis, MO, (with J. Miao, C.E. Slone, T.M. Smith, C. Niu, H. Bei, M. Ghazisaeidi, and M.J. Mills)

32

Grants and Sponsored Research at Rice University, 1980-1998

"The Mechanical and Metallurgical Properties of a JETLOCK Connection", Brown and Root, Inc., May 1981 - December 1982, $27,223 (co-principal investigator with J.E. Merwin).

"The Physical Properties of Ice-Gravel Mixtures", Exxon Production Research Co., October 1981 - December 1982, $175,000 (co-principal investigator with A.J. Chapman and J.E. Merwin).

"A Fundamental Study of Liquid Phase Enhanced Creep", National Science Foundation, July 1982 - June 1983, $55,800 (principal investigator).

"The Physical Properties of Ice-Gravel Mixtures", Exxon Production Research Co., February 1983 - December 1983, $115,000 (co-principal investigator with A.J. Chapman and J.E. Merwin).

"A Fundamental Study of Liquid Phase Enhanced Creep", National Science Foundation, July 1983 - June 1984, $50,000 (principal investigator).

"Creep of Frozen Saline Soils", Exxon Production Research Co., May 1984 - December 1984, $15,000 (principal investigator).

"IBM Faculty Development Grant", IBM Corporation, May 1984 - April 1985, $30,000 (principal investigator).

"A Fundamental Study of Liquid Phase Enhanced Creep", National Science Foundation, July 1984 - June 1985, $50,000 (principal investigator).

"Collaborative Research Program", Instron Corporation, 1 year, $77,887 (co-principal investigator with J.E. Merwin).

"IBM Faculty Development Grant", IBM Corporation, July 1985 - December 1986, $30,000 (principal investigator).

"A Fundamental Study of Liquid Phase Enhanced Creep", National Science Foundation, July 1985 - December 1986, $50,000 (principal investigator).

"Measurement of Microscopic Inhomogeneities in Strength Resulting from High Temperature Deformation Using the Nanoindenter", SHaRE Program of the Oak Ridge Associated Universities, October 1985 - September 1986, $1,200 (principal investigator).

"Relations Between Microhardness and Dislocation Substructure in Single Crystals of Silver", SHaRE Program of the Oak Ridge Associated Universities, October 1986 - September 1987, $2,286 (principal investigator).

"Equipment for Undergraduate Materials Science Laboratory", Hewlett-Packard, September 1986, $19,455 (principal investigator).

"Deformation of Copper-Bismuth Alloys Above and Below the Eutectic Temperature", IBM Corporation, July 1987 - July 1988, $39,270 (principal investigator).

"A Fundamental Study of Liquid Phase Enhanced Creep", National Science Foundation, March 1987 - February 1989 , $60,000 (principal investigator).

"An Investigation of the Unloading Displacement Discontinuity During the Nanoindentation of Silicon", SHaRE Program of the Oak Ridge Associated Universities, October 1987 - September 1988, $2,400 (principal investigator).

"Determination of Elastic Moduli in Hard Materials Using Nanoindentation Techniques", SHaRE Program of the Oak Ridge Associated Universities, October 1988 - September 1989, $2,400 (principal investigator).

"A Fundamental Study of the Mechanical Properties of Intermetallics", Lockheed Missiles and Space Company, February 1989 - January 1990, $15,000 (principal investigator).

33

Research at Rice University (cont.) "Modeling the Surface and Interior Structure of Comet Nuclei Using a Multidisciplinary Approach",

NASA (Johnson Space Center), April 1989 - March 1990, $62,123, (co-principal investigator with C.R. O'Dell (P.I.) and Panos Dakoulas).

"A Study of the Mechanical Properties of Microlaminates Using the Nanoindenter", SHaRE Program of the Oak Ridge Associated Universities, October 1989 - September 1990, $2,870 (principal investigator).

"Mechanical Properties of Microlaminates", Lockheed Missiles and Space Company, February 1990 - December 1991, $74,813 (principal investigator).

"Development of a Fracture Toughness Microprobe", DOE / Martin Marietta / Oak Ridge National Laboratory, April 1, 1990 - March 31, 1991, $65,978 (principal investigator).

"A Study of the Mechanical Properties of Microlaminates Using the Nanoindenter", SHaRE Program of the Oak Ridge Associated Universities, October 1990 - September 1991, $3,290 (principal investigator).

"Development of a Fracture Toughness Microprobe", DOE / Martin Marietta / Oak Ridge National Laboratory, April 1, 1991 - September 30, 1992, $68,765 (principal investigator).

"Effects of Residual Stress on the Measurement of Hardness in the Nanoindenter", SHaRE Program of the Oak Ridge Associated Universities, October 1991 - September 1992, $3,000 (principal investigator).

"Techniques for Producing Ultrafine Scratches and Grooves for Use in Adhesion Testing and Micromachining", State of Texas Advanced Technology Program, January 1, 1992 - August 31, 1994, $199,745 (principal investigator).

"Mechanical Properties of Synthetic Multilayers", Lockheed Missiles and Space Company, May 1, 1992 - April 30, 1993, $15,000 (principal investigator).

"Application of the Finite Element Technique to Indentation Problems", DOE / Martin Marietta / Oak Ridge National Laboratory, May 16, 1992 - May 15, 1993, $30,000 (principal investigator).

"Effects of Anisotropy on the Measurement of Elastic Modulus Using the Nanoindenter", SHaRE Program of the Oak Ridge Institute for Science and Education, October 1992 - September 1993, $3,000 (principal investigator).

"Nanotribology of Magnetic Disk Storage Materials", DARPA through the National Storage Industry Consortium, May 1, 1993 - March 31, 1996, $149,951 (principal investigator).

"Application of the Finite Element Technique to Indentation Problems", DOE / Martin Marietta / Oak Ridge National Laboratory, May 16, 1993 - May 15, 1994, $30,000 (principal investigator).

"Development of a Thin Film Scratch Adhesion Test Using the Nanoindenter", SHaRE Program of the Oak Ridge Institute for Science and Education, October 1993 - September 1994, $1,500 (principal investigator).

"Development of an In Situ Whisker-Reinforced Ceramic Composite for Advanced Technology Applications", State of Texas Advanced Technology Program, January 1, 1994 - August 31, 1996, $109,000 (principal investigator).

"Development of Techniques for the Mechanical Properties Microprobe", DOE / Martin Marietta / Oak Ridge National Lab, April 1, 1994 - March 31, 1996, $96,000 (principal investigator - sabbatical support).

"Application of the Finite Element Technique to Indentation Problems", DOE / Martin Marietta / Oak Ridge National Laboratory, May 16, 1994 - May 15, 1995, $30,000 (principal investigator).

34

Research at Rice University (cont.) "Development of a Thin Film Nanomagnetics Characterization Chamber", NSF Academic Infrastructure

Program, July 1, 1994 - June 30, 1997, $342,460 (co-principal investigator with B.M. Lairson (P.I.), F.B. Dunning, and G.K. Walters).

"An Atomic Force Microscopy Study of Small Contact Impressions Produced in Nanoindentation", SHaRE Program of the Oak Ridge Institute for Science and Education, October 1994 - September 1995, $2,000 (principal investigator).

"Application of the Finite Element Technique to Indentation Problems", DOE / Martin Marietta / Oak Ridge National Laboratory, May 16, 1995 - May 15, 1996, $30,000 (principal investigator).

"Substrate Influences on the Measurement of Mechanical Properties by Nanoindentation", SHaRE Program of the Oak Ridge Institute for Science and Education, October 1995 - September 1996, $1,300 (principal investigator).

"Application of the Finite Element Technique to Indentation Problems and Thin Films", DOE / Lockheed Martin / Oak Ridge National Laboratory, February 12, 1996 - February 11, 1997, $32,000 (principal investigator).

"Development of Testing Methodologies for the Measurement of Mechanical Properties of Thin Films Using Nanoindentation Techniques", DOE / Lockheed Martin / Oak Ridge National Laboratory, July 15, 1996 - July 14, 1997, $36,000 (principal investigator).

"Mechanical Properties of Cortical and Cancellous Bone", Whitaker Foundation, July 16, 1997 - July 15, 1998, $60,989 (co-principal investigator with Prof. Jae Young Rho, University of Memphis).

"Application of the Finite Element Technique to Indentation Problems and Thin Films", DOE / Lockheed Martin / Oak Ridge National Laboratory, July 15, 1997 - July 14, 1999, $65,500 (principal investigator).

35

Grants and Sponsored Research at the University of Tennessee, 1998-2016 Research Grants "Oak Ridge National Laboratory Collaborating Scientist", DOE Basic Energy Sciences Program (through

Lockheed Martin Energy Research), August 1, 1998 – July 31, 1999, $48,640 (principal investigator). “Testing Methodologies for the Measurement of Mechanical Properties of Thin Films Using

Nanoindentation Techniques", DOE Basic Energy Sciences Program (through Lockheed Martin Energy Research), September 17, 1998 - September 16, 1999, $111,438 (principal investigator).

“Development of a Small-Scale, Dynamic Mechanical Testing System”, MTS Systems Corporation, October 1, 1998 – September 30, 2000, $60,000 (principal investigator; through the UTK Center for Materials Processing).

“Mechanical Properties of Pyrolytic Carbon Coatings and Their Influence on the Surface Finishing Characteristics of Artificial Heart Valve Components”, Sulzer Carbomedics, Inc., January 1, 1999 –December 31, 2000, $60,000 (principal investigator; through the UTK Center for Materials Processing).

“Effects of Thermal Aging on the Microstructure and Mechanical Properties of Advanced Nickel Aluminide Alloys”, DOE Advanced Industrial Materials Program (through Lockheed Martin Energy Research), July 1, 1999 – June 30, 2000, $60,000 (principal investigator).

"Oak Ridge National Laboratory Collaborating Scientist", DOE Basic Energy Sciences Program (through Lockheed Martin Energy Research), August 1, 1999 – November 15, 2000, $64,593 (principal investigator).

“Development of Testing Methodologies for the Measurement of Residual Stress Using Nanoindentation Techniques", DOE Basic Energy Sciences Program (through Lockheed Martin Energy Research), September 17, 1999 - November 15, 2000, $131,334 (principal investigator).

"Deformation and Fracture Behavior of Oxide-Dispersion-Strengthened Alloy Systems", DOE Fusion Energy Materials Program (through Lockheed Martin Energy Research), October 1, 1999 - September 30, 2002, $90,000 (principal investigator).

"The Mechanical Behavior of Iridium Alloys and Intermetallics", DOE through ORNL, May 15, 2000 – May 14, 2003, $90,000 (principal investigator).

“Effects of Thermal Aging on the Microstructure and Mechanical Properties of Advanced Nickel Aluminide Alloys”, DOE Advanced Industrial Materials Program (through Lockheed Martin Energy Research), July 1, 2000 – June 30, 2002, $120,004 (principal investigator).

“Development of Techniques for Small-Scale Mechanical Testing”, MTS Systems Corporation, August 1, 2000 - July 31, 2001, $130,000 (principal investigator; through the UTK Center for Materials Processing).

"Research in the Modeling of the Microindentation Process", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2000 - November 15, 2001, $52,842 (principal investigator).

“Development of Testing Methodologies for the Measurement of Residual Stresses Using Nanoindentation Techniques", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2000 - November 15, 2001, $111,412 (principal investigator).

"Gordon Research Conference on Thin Film Mechanical Behavior", National Science Foundation, June 1, 2000 - December 31, 2000, $8000 (principal investigator).

"Aging and Properties of High Temperature Alloys", DOE through UT Battelle, February 5, 2001 - February 4, 2004, $105,000 (principal investigator).

36

Research at University of Tennessee (cont.) "Development of Combinatorial Methods for Alloy Design and Optimization", US DOE, Industrial

Materials for the Future Program", April 1, 2002 - March 31, 2005, $600,000 ($300,000 to UT and $300,000 to ORNL) (principal investigator).

“Development of Techniques for Small-Scale Mechanical Testing”, MTS Systems Corporation, August 1, 2001 - July 31, 2002, $130,000 (principal investigator; through the UTK Center for Materials Processing).

"Research in Nanoindentation Modeling", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2001 - November 15, 2002, $54,922 (principal investigator).

“Development of Testing Methodologies for Measurement of Thin Film Mechanical Properties by Nanoindentation", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2001 - November 15, 2002, $169,744 (principal investigator).

“Effects of Thermal Aging on the Microstructure and Mechanical Properties of Advanced Nickel Aluminide Alloys”, DOE Advanced Industrial Materials Program through (UT Battelle), July 1, 2002 – June 30, 2004, $120,000 (principal investigator).

"High Pressure Phase Transformations in Silicon, Germanium, and Silicon Nitride", National Science Foundation, July 1, 2002 - June 30, 2005 , $284,851 (co-principal investigator with Prof. John Patten, Western Michigan University).

"Mesoscale Materials Physics Using X-ray Microbeams", DOE through UT Battelle, October 13, 2002 - October 12, 2003, $84,796 (principal investigator).

"Microbeam Software Research", DOE through UT Battelle, October 13, 2002 - October 12, 2003, $15,962 (principal investigator).

“Development of Techniques for Small-Scale Mechanical Testing”, MTS Systems Corporation, August 1, 2002 - July 31, 2003, $60,000 (principal investigator; through the UTK Center for Materials Processing).

"Deformation and Fracture Behavior of Oxide-Dispersion-Strengthened Alloy Systems", DOE Fusion Energy Materials Program (through UT Battelle), November 2, 2002 - November 1, 2005, $111,000 (principal investigator).

"Research in Nanoindentation Modeling", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2002 - November 15, 2003, $58,086 (principal investigator).

“Development of Testing Methodologies for Measurement of Thin Film Mechanical Properties by Nanoindentation", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2002 - November 15, 2003, $141,382 (principal investigator).

“Development of Techniques for Small-Scale Mechanical Testing”, MTS Systems Corporation, August 1, 2003 - July 31, 2004, $64,000 (principal investigator; through the UTK Center for Materials Processing).

"Mesoscale Materials Physics Using X-ray Microbeams", DOE through UT Battelle, October 13, 2003 - October 12, 2004, $86,759 (principal investigator).

"Microbeam Software Research", DOE through UT Battelle, October 13, 2003 - October 12, 2004, $16,394 (principal investigator).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2003 - November 15, 2005, $159,056 (principal investigator).

"Development of Testing Methodologies for Measurement of Mechanical Properties by Nanoindentation", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2003 - November 15, 2004, $139,292 (principal investigator).

37

Research at University of Tennessee (cont.) "Longitudinal Hardness and Young's Modulus of Loblolly Pine Cell Walls Using the Nanoindentation

Technique", USDA WUR Grant, October 1, 2003 - September 30, 2006 , $88,270 (co-principal investigator with Prof. Siqun Wang).

“Development of Techniques for Small-Scale Mechanical Testing”, MTS Systems Corporation, August 1, 2004 - July 31, 2005, $64,000 (principal investigator; through the UTK Center for Materials Processing).

"Mesoscale Materials Physics Using X-ray Microbeams", DOE through UT Battelle, October 13, 2004 - October 12, 2005, $90,037 (principal investigator).

"Microbeam Software Research", DOE through UT Battelle, October 13, 2004 - October 12, 2005, $17,052 (principal investigator).

"Development of Testing Methodologies for Measurement of Mechanical Properties by Nanoindentation", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2004 - November 15, 2005, $137,361 (principal investigator).

"Combinatorial Alloy Design of Ta-Mo-Cr Alloys", DOE (through UT Battelle), January 31, 2005 - June 30, 2005, $20,000 (principal investigator).

"High Pressure Phase Transformations in Silicon, Germanium, and Silicon Nitride", National Science Foundation, July 1, 2005 - December 31, 2005 , $49,158 (co-principal investigator with Prof. John Patten, Western Michigan University).

"Characterization of Interphase in Natural Fiber Reinforced Polymer Composites", US Department of Agriculture, September 1, 2005 - August 31, 2008, $378,528 (co-principal investigator with Siqun Wang and Seung-Hwan Lee).

“Development of Techniques for Small-Scale Mechanical Testing”, MTS Systems Corporation, August 1, 2005 - July 31, 2006, $64,000 (principal investigator; through the UTK Center for Materials Processing).

"Mesoscale Materials Physics Using X-ray Microbeams", DOE through UT Battelle, October 13, 2005 - October 12, 2006, $90,174 (principal investigator).

"Microbeam Software Research", DOE through UT Battelle, October 13, 2005 - October 12, 2006, $27,356 (principal investigator).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2005 - November 15, 2007, $257,195 (principal investigator).

"Development of Testing Methodologies for Measurement of Mechanical Properties by Nanoindentation", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2006 - November 15, 2007, $115,946 (principal investigator).

“Development of Techniques for Small-Scale Mechanical Testing”, MTS Systems Corporation, August 1, 2006 - July 31, 2007, $64,000 (principal investigator; through the UTK Center for Materials Processing).

“Development of Techniques for Small-Scale Mechanical Testing”, MTS Systems Corporation, August 1, 2007 - July 31, 2008, $64,000 (principal investigator; through the UTK Center for Materials Processing).

"Nanoindentation at the High Temperature Materials Laboratory", DOE Energy Efficiency and Renewable Energy Program (through UT Battelle), November 16, 2007 - November 15, 2008, $82,908 (principal investigator).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2007 - November 15, 2008, $107,462 (principal investigator).

38

Research at University of Tennessee (cont.) "Piezoceramic Multilayer Actuator Characterization", DOE through UT Battelle, April 1, 2008 - March

31, 2009, $109,466 (principal investigator). "Scale-Dependent Crystal Plasticity and Nanoindentation-Induced Dislocation Microstructure", NSF,

May 1, 2008 - April 30, 2011, $316,643 (co-principal investigator with Yanfei Gao). "Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16,

2008 - November 15, 2009, $112,836 (principal investigator). "Development of Techniques for Small-Scale Mechanical Testing", Agilent Technologies, November 1,

2008 - October 31, 2009, $64,000 (principal investigator; through the UTK Center for Materials Processing).

“Measurements of Thin Film Mechanical Properties by Instrumented Indentation and Automated Topography Techniques”, Agilent Technologies Foundation, January 1, 2009 - December 31, 2009, $36,833 (principal investigator; through the UTK Center for Materials Processing).

"Piezoceramic Multilayer Actuator Characterization", DOE through UT Battelle, April 1, 2009 - March 31, 2010, $108,524 (principal investigator).

"Energy Frontier Center for Defect Physics in Materials", DOE BES Program through UT Battelle, July 1, 2009 - June 30, 2014, $500,000 to UTK (senior investigator with G.M. Stocks).

"Indentation-Induced Damage Initiation and Evolution in Single- and Poly-Crystalline Ceramics", NSF, October 1, 2009 - September 30, 2012, $315,000 (co-principal investigator with Yanfei Gao).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2009 - November 15, 2010, $88,993 (principal investigator).

"Mechanical Properties of Thin Film Electrode Materials", DOE Basic Energy Sciences Program (through UT Battelle), January 15, 2010 - September 30, 2010, $21,924 (principal investigator).

"Piezoceramic and Piezoceramic Multilayer Actuator Characterization", DOE through UT Battelle, April 1, 2010 - June 30, 2011, $118,239 (principal investigator).

"Experimental Studies of Small Scale Mechanical Behavior", DOE through UT Battelle, September 1, 2010 - July 31, 2011, $114,892 (principal investigator).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2010 - November 15, 2011, $107,462 (principal investigator).

"Mechanical Properties of Thin Film Electrode Materials", DOE Basic Energy Sciences Program (through UT Battelle), January 20, 2011 - January 19, 2012, $24,500 (principal investigator).

"Mechanical Testing Experiments", DOE through UT Battelle, January 15, 2011 - December 31, 2011, $25,000 (principal investigator).

"Collaborative Research: Aging and Disease Effects on Viscous Energy Dissipation of Bone as Characterized by Nanoindentation", NSF, July 1, 2011 - June 30, 2015, $226,074 (principal investigator with E.G. Herbert, co-PI).

"Experimental Studies of Small Scale Mechanical Behavior", DOE through UT Battelle, September 1, 2011 - July 31, 2012, $122,277 (principal investigator).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2011 - November 15, 2012, $117,126 (principal investigator).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2012 - November 15, 2013, $123,304 (principal investigator).

"Experimental Studies of Small Scale Mechanical Behavior", DOE through UT Battelle, September 1, 2012 - May 31, 2015, $212,682 (principal investigator).

39

Research at University of Tennessee (cont.) "Structure and Properties of High Entropy Alloys", DOE through UT Battelle, April 1, 2013 - August 31,

2014, $52,894 (principal investigator). "Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16,

2013 - November 15, 2014, $128,853 (principal investigator). "Multipurpose High Resolution X-ray Diffractometer for Nuclear Energy Research and Education", DOE

NEUP Infrastructure Program, $549,750, January 1, 2014 - December 31, 2014 (principal investigator with M. Patel - lead PI, K. Sickafus, C.J. Rawn, and W.J. Weber).

"Template-Directed Directionally Solidified Eutectic Metamaterials", Air Force Office of Scientific Research, $724,996, September 30, 2012 - September 30, 2017 (co-investigator with E.P. George).

"MRI: Development of and Broad-Based Materials Research with the Next Generation Nanomechanical Testing Platform", National Science Foundation, August 15, 2014 - July 31, 2019, $2,203,758 (principal investigator with E.G. Herbert and Warren C. Oliver, co-PIs).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2014 - November 15, 2015, $132,549 (principal investigator).

"Mechanical Properties at the Protected Lithium Interface", DOE EERE Program through Oak Ridge National Laboratory, October 1, 2014 - September 30, 2017, $330,000.71 (PI with lead-PI E.G. Herbert).

"Glass and Glass-Ceramic Structure and Responding Mechanical Performance", Army Research Laboratory, September 26, 2014 - September 25, 2017, $149,574 (PI with lead PI Andrew Wereszczak).

"Experimental Studies of Small Scale Mechanical Behavior", DOE through UT Battelle, October 16, 2014 - May 31, 2015, $4,822 (principal investigator).

"High-Pressure Changes in Silicate Glasses", Army Research Laboratory, October 1, 2015 - September 30, 2018, $517,248 (PI with lead PI Andrew Wereszczak).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2015 - November 15, 2016, $162,761 (principal investigator).

"Joint Faculty Appointment", DOE Basic Energy Sciences Program (through UT Battelle), November 16, 2016 - January 31, 2017, $24,342 (principal investigator).

"Multiscale Mechanical Properties and Alloy Design", US Department of Energy, Basic Energy Sciences Program, October 1, 2015 - September 30, 2018, $2,907,000 (PI at Oak Ridge National Laboratory).

Equipment Grants "MTS 10GL Electro-Mechanical Material Testing Workstation", MTS Systems Corporation, August

1999, $52,150. "Nanoinstruments XP Mechanical Properties Microprobe", Nanoinstruments, Inc., $200,000, January

1999. "Nanoindenter XP Upgrade", MTS Systems Corporation, July 2004, $120,000. "UTM Nanotensile Testing System", MTS Systems Corporation, July 2004, $210,000

40

Publications - George M. Pharr

Articles 1. G.M. Pharr and W.D. Nix, "A Comparison of the Orowan Stress with the Threshold Stress for Creep in

Ni-20Cr-2Th02 Single Crystals", Scripta Metallurgica 10, p. 1007 (1976).

2. G.M. Pharr, D.M. Barnett and W.D. Nix, "A Critique of the Ayres-Stein Method of Predicting Cleavage Planes in Metals", Scripta Metallurgica 12, p. 973 (1978).

3. G.M. Pharr and W.D. Nix, "Application of the Methods of Dislocation Dynamics to Describe Plastic Flow in Both B.C.C. and F.C.C. Metals", Acta Metallurgica 27, p. 433 (1979).

4. G.M. Pharr and W.D. Nix, "A Numerical Study of Cavity Growth Controlled by Surface Diffusion", Acta Metallurgica 27, p. 1615 (1979).

5. G.M. Pharr, "Some Observations on the Relation Between Dislocation Substructure and Power Law Breakdown in Creep", Scripta Metallurgica 15, p. 713 (1981).

6. G.M. Pharr and M.F. Ashby, "On Creep Enhanced by a Liquid Phase", Acta Metallurgica 31, p. 129 (1983).

7. M.S. Nixon and G.M. Pharr, "The Effects of Temperature, Salinity, and Stress on the Creep of Frozen Saline Soil", Proceedings of the Third International Offshore Mechanics and Arctic Engineering Symposium, New Orleans, February, 1984, p. 77.

8. R. Sheikh and G.M. Pharr, "The Grain Size Dependence of Creep Enhanced by a Liquid Phase in Porous Potassium Chloride", Scripta Metallurgica 18, p. 837 (1984).

9. M.S. Nixon and G.M. Pharr, "The Effects of Temperature, Salinity, and Stress on the Creep of Frozen Saline Soil", Journal of Energy Resources Technology 106, p. 344 (1984).

10. B.L. Vaandrager and G.M. Pharr, "Creep of Alpha Brass Containing a Grain Boundary Liquid Phase", Scripta Metallurgica 18, p.1337 (1984).

11. P.S. Godavarti and G.M. Pharr, "A Technique for Producing Ice from Sodium Chloride Brine for Studying Fundamental Deformation Behavior", Proceedings of the Fourth International Offshore Mechanics and Arctic Engineering Symposium, Dallas, February, 1985, vol. 2, p. 234.

12. Gh.R. Sheikh and G.M. Pharr, "Further Observations on Creep Enhanced by A Liquid Phase in Porous Potassium Chloride", Acta Metallurgica 33, p. 231 (1985).

13. P.S. Godavarti and G.M. Pharr, "A Technique for Producing Ice from Sodium Chloride Brine for Studying Fundamental Deformation Behavior", Journal of Energy Resources Technology 107, p. 173 (1985).

14. G.M. Pharr and J.E. Merwin, "Effects of Brine Content on the Strength of Frozen Ottawa Sand", Cold Regions Science and Technology 11, p. 205 (1985).

15. G.M. Pharr, "On the Correlation Between the Constants in the Dorn Equation for Creep", Scripta Metallurgica 19, p. 1347 (1985).

16. S.V. Raj and G.M. Pharr, "A Compilation and Analysis of Data for the Stress Dependence of the Subgrain Size", Materials Science and Engineering 81, p. 217 (1986).

17. S.V. Raj and G.M. Pharr, "A Compilation and Analysis of Data for the Stress Dependence of the Subgrain Size", Low Energy Dislocation Structures (M.N. Bassim et al, editors), p. 217, Elsevier-Sequoia, Laussanne (1986).

18. M. Yoshihara, G.M. Pharr, and R.B. McLellan, "The Structure of Pd-Y Solid Solutions", Scripta Metallurgica 21, p. 393 (1987).

41

Publications (cont.) 19. G.M. Pharr and P.S. Godavarti, "A Comparison of the Creep Behavior of Saline Ice and Frozen Saline

Ottawa Sand at -8˚C", Cold Regions Science and Technology 14, p. 273 (1987). 20. M. Nastasi, J.-P. Hirvonen, T.R. Jervis, G.M. Pharr and W.C. Oliver, "Surface Mechanical Properties

of C Implanted Ni", Journal of Materials Research 3, p. 226 (1988). 21. T. Baykara and G.M. Pharr, "Wetting and Penetration of Grain Boundaries in Alkali Halide Salts by

Solutions of Water and Methanol", Scripta Metallurgica 22, p. 226 (1988). 22. G.M. Pharr, M.S. Zedalis, P.S. Gilman, and D.J. Skinner, "High Temperature Creep Deformation of a

Rapidly Solidified Al-Fe-V-Si Alloy", Dispersion Strengthened Aluminum Alloys (Y.-W. Kim and W.M. Griffith, editors), p. 309, The Minerals, Metals and Materials Society (1988).

23. T.R. Jervis, J.-P. Hirvonen, M. Nastasi, T.G. Zocco, J.R. Martin, G.M. Pharr and W.C. Oliver, "Surface Mechanical Properties of Ti Alloys Produced by Excimer Laser Mixing of Ti on AISI 304 Stainless Steel", Materials Research Society Symposium Proceedings 140, New Materials Approaches to Tribology: Theory and Applications, L.E. Pope, L. Fehrenbacher, and W.O. Winer, editors, p. 189 (1989).

24. G.M. Pharr and W.C. Oliver, "Nanoindentation of Silver - Relations Between Hardness and Dislocation Structure", Journal of Materials Research 4, p.94 (1989).

25. B.L. Vaandrager and G.M. Pharr, "Compressive Creep of Copper Containing a Liquid Bismuth Intergranular Phase", Acta Metallurgica 37, p. 1057 (1989).

26. S.V. Raj, G.M. Pharr and J.D. Whittenberger, "On the Stability of the Creep Substructure in NaCl Single Crystals", Proceedings of the Second International Conference on Low Energy Dislocation Structures, University of Virginia, Charlottesville, August 1989. p. 161.

27. G.M. Pharr, P.S. Godavarti and B.L. Vaandrager, "Effects of Wetting on the Compression Creep Behavior of Metals Containing Low Melting Intergranular Phases", Journal of Materials Science 24, p. 784 (1989).

28. G.M. Pharr, W.C. Oliver and R.F. Cook, "Crack Formation in Brittle Materials by Sharp Contact", Advances in Fracture Research: Proceedings of the Seventh International Conference on Fracture, Pergamon Press, pp. 3723-3730 (1989).

29. S.V. Raj, G.M. Pharr and J.D. Whittenberger, "On the Stability of the Creep Substructure in NaCl Single Crystals", Materials Science and Engineering A113, p.161 (1989).

30. G.M. Pharr, W.C. Oliver and D.R. Clarke, "Hysteresis and Discontinuity in the Indentation Load-Displacement Behavior of Silicon", Scripta Metallurgica 23, p. 1949 (1989).

31. S.V. Raj and G.M. Pharr, "Creep Substructure Formation in Sodium Chloride Single Crystals in the Power-Law and Exponential Creep Regimes", Materials Science and Engineering A122, pp. 233-242 (1989).

32. G.M. Pharr and R.F. Cook, "Instrumentation of a Conventional Hardness Tester for Load-Displacement Measurement During Indentation", Journal of Materials Research 5, pp. 847-851 (1990).

33. R.F. Cook and G.M. Pharr, "Direct Observation and Analysis of Indentation Cracking in Glasses and Ceramics", Journal of the American Ceramic Society 73, pp. 787- 818 (1990).

34. G.M. Pharr, "Creep of Solids Containing Liquid or Amorphous Grain Boundary Phases", Modeling of Material Behavior and Design, edited by J.D. Embury and A.W. Thompson, TMS Publications, pp. 89-112 (1990).

35. G.M. Pharr, W.C. Oliver and D.R. Clarke, "The Mechanical Behavior of Silicon During Small-Scale Indentation", Journal of Electronic Materials 19, pp. 881-887 (1990).

42

Publications (cont.) 36. G.M. Pharr, W.C. Oliver, and D.S. Harding, "New Evidence for a Pressure-Induced Phase

Transformation During the Indentation of Silicon", Journal of Materials Research 6, pp. 1129-1130 (1991).

37. T. Baykara and G.M. Pharr, "Effects of Liquid Phases on Intrinsic Interfacial Sliding of Alkali Halide Crystals", Acta Metallurgica et Materiala 39, pp. 1141-1150 (1991).

38. T.C. Chou, T.G. Nieh, S.D. McAdams, and G.M. Pharr, "Microstructures and Mechanical Properties of Thin Films of Aluminum Oxide", Scripta Metallurgica et Materiala 25, pp. 2203-2208 (1991).

39. S.V. Raj, J.D. Whittenberger, and G.M. Pharr, "Comments on the Paper 'Does the Subgrain Size Influence the Rate of Creep' ", Materials Science and Engineering A145, pp. L13-17 (1991).

40. G.M. Pharr, S.V. Courington, J. Wadsworth, and T.G. Nieh, "Deformation of Extruded Nickel Beryllide Between Room Temperature and 820˚C", Journal of Materials Research 6, pp. 2653-2659 (1991).

41. G.M. Pharr, W.C. Oliver, and F.R. Brotzen, "On the Generality of the Relationship Among Contact Stiffness, Contact Area, and Elastic Modulus During Indentation", Journal of Materials Research 7, pp. 613-617 (1992).

42. S.V. Raj and G.M. Pharr, "Effect of Temperature on the Formation of Creep Substructure in Sodium Chloride Single Crystals", Journal of the American Ceramic Society 75, pp. 347-352 (1992).

43. G.M. Pharr, W.C. Oliver, R.F. Cook, P.D. Kirchner, M.C. Kroll, T.R. Dinger, and D.R. Clarke, "Electrical Resistance of Metallic Contacts on Silicon and Germanium During Indentation", Journal of Materials Research 7, pp. 961-972 (1992).

44. G.M. Pharr, "The Anomalous Behavior of Silicon During Nanoindentation", in Thin Films: Stresses and Mechanical Properties III, edited by W.D. Nix, J.C. Bravman, E. Arzt, and L.B. Freund, Materials Research Society, Pittsburgh, pp. 301-312 (1992) [also referenced as Materials Research Society Symposium Proceedings 239, pp. 301-312 (1992)].

45. J.C. Morris, G.M. Pharr, and D.L. Callahan, "Preparation of Microindentations in Cross-Section", in Specimen Preparation for Transmission Electron Microscopy III, edited by R. Anderson, B. Tracy, and J. Bravman, Materials Research Society, Pittsburgh (1992) [also referenced as Materials Research Society Symposium Proceedings 254 (1992)].

46. W.C. Oliver and G.M. Pharr, "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments", Journal of Materials Research 7, pp. 1564-1583 (1992).

47. G.M. Pharr and W.C. Oliver, "Measurement of Thin Film Mechanical Properties Using Nanoindentation", MRS Bulletin 17, pp. 28-33 (1992).

48. T.C. Chou, T.G. Nieh, T.Y. Tsui, G.M. Pharr, and W.C. Oliver "Mechanical Properties and Microstructures of Metal/Ceramic Microlaminates: Part I. Nb/MoSi2 Systems", Journal of Materials Research. 7, pp. 2765-2773 (1992).

49. T.C. Chou, T.G. Nieh, S.D. McAdams, G.M. Pharr, and W.C. Oliver, "Mechanical Properties and Microstructures of Metal/Ceramic Microlaminates: Part II. A Mo/Al2O3 System", Journal of Materials Research. 7, pp. 2774-2784 (1992).

50. G.M. Pharr, D.S. Harding, and W.C. Oliver, "Measurement of Fracture Toughness in Thin Films and Small Volumes Using Nanoindentation Methods", Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures, edited by M. Nastasi, D.M. Parkin, and H. Gleiter, Kluwer Academic Publishers, pp. 449-461 (1993).

43

Publications (cont.) 51. W.C. Oliver, B.N. Lucas, and G. M. Pharr, "Mechanical Characterization Using Indentation

Experiments", Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures, edited by M. Nastasi, D.M. Parkin, and H. Gleiter, Kluwer Academic Publishers, pp. 417-428 (1993).

52. G.M. Pharr, T.Y. Tsui, A. Bolshakov, and W.C. Oliver, "Effects of Residual Stress on the Measurement of Hardness and Elastic Modulus Using Nanoindentation", in Materials Reliability in Microelectronics, edited by P. Borgesen, J.C. Coburn, J.E. Sanchez, Jr., K.P. Rodbell, and W.F. Filter, Materials Research Society, Pittsburgh, pp. 127-134 (1994) [also referenced as Materials Research Society Symposium Proceedings 338, pp. 127-134 (1994)].

53. R.F. Cook and G.M. Pharr, "Indentation Load-Displacement Behavior During Conventional Hardness Testing", Journal of Hard Materials 5, pp. 179-190 (1995).

54. A. Bolshakov, W.C. Oliver, and G.M. Pharr, "An Explanation for the Shape of Nanoindentation Unloading Curves Based on Finite Element Simulation", in Thin Films: Stresses and Mechanical Properties V, edited by S.P. Baker, C.A. Ross, P.H. Townsend, C.A. Volkert, and P. Borgesen, Materials Research Society, Pittsburgh, pp. 675-680 (1995) [also referenced as Materials Research Society Symposium Proceedings 356, pp. 675-680 (1995)].

55. S.D. McAdams, T.Y. Tsui, W.C. Oliver, and G.M. Pharr, "Effects of Interlayers on the Scratch Adhesion Performance of Ultra-Thin Films of Copper and Gold on Silicon Substrates", in Thin Films: Stresses and Mechanical Properties V, edited by S.P. Baker, C.A. Ross, P.H. Townsend, C.A.

Volkert, and P. Borgesen, Materials Research Society, Pittsburgh, pp. 809-814 (1995) [also referenced as Materials Research Society Symposium Proceedings 356, pp. 809-814 (1995)].

56. D.S. Harding, W.C. Oliver, G.M. Pharr, "Cracking During Nanoindentation and Its Use in the Measurement of Fracture Toughness", in Thin Films: Stresses and Mechanical Properties V, edited by S.P. Baker, C.A. Ross, P.H. Townsend, C.A. Volkert, and P. Borgesen, Materials Research Society, Pittsburgh, pp. 663-668(1995) [also referenced as Materials Research Society Symposium Proceedings 356, pp. 663-668 (1995)].

57. T.Y. Tsui, G.M. Pharr, W.C. Oliver, Y.W. Chung, E.C. Cutiongo, C.S. Bhatia, R.L. White, R.L. Rhodes, and S.M. Gorbatkin, "Nanoindentation and Nanoscratching of Hard Coating Materials for Magnetic Disks", in Thin Films: Stresses and Mechanical Properties V, edited by S.P. Baker, C.A. Ross, P.H. Townsend, C.A. Volkert, and P. Borgesen, Materials Research Society, Pittsburgh, pp. 767-772 (1995) [also referenced as Materials Research Society Symposium Proceedings 356, pp. 767-772 (1995)].

58. T.Y. Tsui, G.M. Pharr, W.C. Oliver, C.S. Bhatia, R.L. White, S. Anders, A. Anders, and I.G. Brown, "Nanoindentation and Nanoscratching of Hard Carbon Coatings for Magnetic Disks", in Mechanical Behavior of Diamond and Other Forms of Carbon, edited by M.D. Drory, M.S. Donley, D. Bogy, and J.E. Field, Materials Research Society, Pittsburgh, pp. 447-452 (1995) [also referenced as Materials Research Society Symposium Proceedings 383, pp. 447-452 (1995)].

59. S. Anders, A. Anders, J.W. Ager, III, Z. Wang, G.M. Pharr, T.Y. Tsui, I.G. Brown, and C.S. Bhatia, "Mechanical Properties of Amorphous Hard Carbon Films Prepared by Cathodic Arc Deposition", in Mechanical Behavior of Diamond and Other Forms of Carbon, edited by M.D. Drory, M.S. Donley, D. Bogy, and J.E. Field, Materials Research Society, Pittsburgh, pp. 453-458 (1995) [also referenced as Materials Research Society Symposium Proceedings 383, pp. 453-458 (1995)].

60. T.D. Shen, C.C. Koch, T.Y. Tsui, and G.M. Pharr, "On the Elastic Moduli of Nanocrystalline Fe, Cu, Ni and Cu-Ni Alloys Prepared by Mechanical Milling/Alloying", Journal of Materials Research. 10, pp. 2892-2896 (1995).

44

Publications (cont.) 61. G.M. Pharr, D.L. Callahan, S.D. McAdams, T.Y. Tsui, S. Anders, A. Anders, J.W. Ager III, I.G.

Brown, C.S. Bhatia, S.R.P. Silva, and J. Robinson, "Hardness, Elastic Modulus, and Structure of Very Hard Carbon Films Produced by Cathodic-Arc Deposition with Substrate Pulse Biasing", Applied Physics Letters 68, pp. 779-781 (1996).

62. T.Y. Tsui, W.C. Oliver, and G.M. Pharr, "Influences of Stress on the Measurement of Mechanical Properties Using Nanoindentation: I. Experimental Studies in an Aluminum Alloy", Journal of Materials Research 11, pp. 752-759 (1996).

63. A. Bolshakov, W.C. Oliver, and G.M. Pharr, "Influences of Stress on the Measurement of Mechanical Properties Using Nanoindentation: II. Finite Element Simulations", Journal of Materials Research 11, pp. 760-768 (1996).

64. M. Roy, J.Y. Rho, T.Y. Tsui, and G.M. Pharr, "Variation of Young's Modulus and Hardness in Human Lumbar Vertebrae Measured by Nanoindentation", Advances in Bioengineering BED 33, pp. 385-386 (1996).

65. K. Ghaffari, B. Wang, S. Danyluk, M. Billone, and G.M. Pharr, "Optical Interferometric Determination of In-Plane Residual Stresses in SiO2 Films on Silicon Substrates", Materials Evaluation, pp. 1167-1170 (1996).

66. E.Y. Sun, P.F. Becher, S.-L. Hwang, S.B. Waters, G.M. Pharr, and T.Y. Tsui, "Properties of Silicon-Aluminum-Yttrium Oxynitride Glasses", Journal of Non-Crystalline Solids 208, pp. 162-169 (1996).

67. A. Bolshakov and G.M. Pharr, "Inaccuracies in Sneddon's Solution for Elastic Indentation by a Rigid Cone and Their Implications for Nanoindentation Data Analysis", Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.E. Sundgren, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 189-194 (1997) [also referenced as Materials Research Society Symposium Proceedings 436, pp. 189-194 (1997)].

68. A. Bolshakov, W.C. Oliver, and G.M. Pharr, "Finite Element Studies of the Influence of Pileup on the Analysis of Nanoindentation Data", in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.E. Sundgren, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 141-146 (1997) [also referenced as Materials Research Society Symposium Proceedings 436, pp. 141-146 (1997)].

69. T.Y. Tsui, W.C. Oliver, and G.M. Pharr, "Indenter Geometry Effects on the Measurement of Mechanical Properties by Nanoindentation with Sharp Indenters, in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.E. Sundgren, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 147-152 (1997) [also referenced as Materials Research Society Symposium Proceedings 436, pp. 147-152 (1997)].

70. T.Y. Tsui, W.C. Oliver, and G.M. Pharr, "Nanoindentation of Soft Films on Hard Substrates - the Importance of Pileup", in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.E. Sundgren, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 207-212 (1997) [also referenced as Materials Research Society Symposium Proceedings 436, pp. 207-212 (1997)].

71. B.N. Lucas, W.C. Oliver, J.-L. Loubet, and G.M. Pharr, "Understanding Time Dependent Deformation During Indentation Testing", in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J.E. Sundgren, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 233-238 (1997) [also referenced as Materials Research Society Symposium Proceedings 436, pp. 233-238 (1997)].

45

Publications (cont.) 72. J.-Y. Rho, T.Y. Tsui, and G.M. Pharr, "Elastic Properties of Human Vertebral Cortical and Trabecular

Bone Measured by Nanoindentation", Biomaterials 18, pp. 1325-1330 (1997). 73. C. Doughty, S.M. Gorbatkin, T.Y. Tsui, G.M. Pharr, and D.L. Medlin, "Hard Boron Suboxide-Based

Films Deposited in a Sputter-Sourced, High Density Plasma Deposition System", Journal of Vacuum Science and Technology A 15, pp. 2623-2626 (1997).

74. S. Anders, D.L. Callahan, G.M. Pharr, T.Y. Tsui, and C.S. Bhatia, "Multilayers of Amorphous Carbon Prepared by Cathodic Arc Deposition", Surface and Coatings Technology 94-95, pp. 189-194 (1997).

75. S. Anders, Joel W. Ager III, G.M. Pharr, T.Y. Tsui, and I.G. Brown, "Heat Treatment of Cathodic Arc Deposited Amorphous Hard Carbon Films", Thin Solid Films 308-309, pp. 186-190 (1997).

76. T.Y. Tsui, C.A. Ross and G.M. Pharr, "Nanoindentation Hardness of Soft Films on Hard Substrates: Effects of the Substrate", in Materials Reliability in Microelectronics VII, edited by J.J. Clement, R.R. Keller, K.S. Krisch, J.E. Sanchez, Jr., and Z. Suo, Materials Research Society, Pittsburgh, pp. 57-62 (1997) [also referenced as Materials Research Society Symposium Proceedings 473, pp. 57-62 (1997)].

77. T.Y. Tsui, C.A. Ross and G.M. Pharr, "Effects of Adhesion on the Measurement of Thin Film Mechanical Properties by Nanoindentation", in Materials Reliability in Microelectronics VII, edited by J.J. Clement, R.R. Keller, K.S.Krisch, J.E. Sanchez, Jr., and Z. Suo, Materials Research Society,

Pittsburgh, pp. 51-56 (1997) [also referenced as Materials Research Society Symposium Proceedings 473, pp. 51-56 (1997)].

78. A. Bolshakov and G.M. Pharr, "Influences of Pile-up on the Measurement of Mechanical Properties by Load and Depth Sensing Indentation Techniques", Journal of Materials Research 13, pp. 1049-1058 (1998).

79. J.C. Hay and G.M. Pharr, "Critical Issues in Measuring the Mechanical Properties of Hard Films on Soft Substrates by Nanoindentation Techniques", in Thin Films: Stresses and Mechanical Properties VII, edited by R.C. Cammarata, M.A. Nastasi, E. P. Busso, and W.C. Oliver, Materials Research Society, Pittsburgh, pp. 65-70 (1998) [also referenced as Materials Research Society Symposium Proceedings 505, pp. 65-70 (1998)].

80. G.M. Pharr, A. Bolshakov, T.Y. Tsui, and J.C. Hay, "Nanoindentation of Soft Films on Hard Substrates: Experiments and Finite Element Simulations", in Thin Films: Stresses and Mechanical Properties VII, edited by R.C. Cammarata, M.A. Nastasi, E. P. Busso, and W.C. Oliver, Materials Research Society, Pittsburgh, pp. 109-120 (1998) [also referenced as Materials Research Society Symposium Proceedings 505, pp. 109-120 (1998)].

81. G.M. Pharr, "Measurement of Mechanical Properties by Ultra-low Load Indentation", Materials Science and Engineering A 253, 151-159 (1998).

82. J.C. Hay, E.Y. Sun, G.M. Pharr, P.F. Becher, and K.B. Alexander, "Elastic Anisotropy of Beta Silicon Nitride Whiskers", Journal of the American Ceramic Society 81, 2661-2669 (1998).

83. J.C. Hay, A. Bolshakov, and G.M. Pharr, "Applicability of Sneddon Relationships to the Real Case of a Rigid Cone Penetrating an Infinite Half Space", in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 263-268 (1998) [also referenced as Materials Research Society Symposium Proceedings 522, pp. 263-268 (1998)].

84. J.C. Hay and G.M. Pharr, "Experimental Investigations of the Sneddon Solution and An Improved Solution for the Analysis of Nanoindentation Data", in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker, Materials

46

Publications (cont.) Research Society, Pittsburgh, pp. 39-44 (1998) [also referenced as Materials Research Society

Symposium Proceedings 522, pp. 39-44 (1998)]. 85. J.L. Hay, W.C. Oliver, A. Bolshakov, and G.M. Pharr, "Using the Ratio of the Loading Slope and

Elastic Stiffness to Predict Pile-up and Constraint Factor During Indentation", in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, N. Burnham, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 101-106 (1998) [also referenced as Materials Research Society Symposium Proceedings 522, pp. 101-106 (1998)].

86. B. Taljat, T. Zacharia, and G.M. Pharr, "Pile-Up Behavior of Spherical Indentations in Engineering Materials", in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich , N. Burnham, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 33-38 (1998) [also referenced as Materials Research Society Symposium Proceedings 522, pp. 33-38 (1998)].

87. T.F. Page, G.M. Pharr, J.C. Hay, W.C. Oliver, B.N. Lucas, E. Herbert, and L. Riester,

"Nanoindentation Characterization of Coated Systems: P:S2 – A New Approach Using the Continuous Stiffness Technique", in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich , N. Burnham, and S.P. Baker, Materials Research Society, Pittsburgh, pp. 53-64 (1998) [also referenced as Materials Research Society Symposium Proceedings 522, pp. 53-64 (1998)].

88. M.E. Roy, J.-Y. Rho, T.Y. Tsui, N.D. Evans, and G.M. Pharr, "Mechanical and Morphological Variation of the Human Lumbar Vertebral Cortical and Trabecular Bone", Journal of Biomedical Materials Research 44, pp. 191-197 (1999).

89. T.Y. Tsui and G.M. Pharr, "Substrate Effects on Nanoindentation Mechanical Property Measurement of Soft Films on Hard Substrates", Journal of Materials Research. 14, pp. 292-301 (1999).

90. J.-Y. Rho, M.E. Roy II, T.Y. Tsui, and G.M. Pharr, "Elastic Properties of Microstructural Components of Human Bone Tissue Measured by Nanoindentation", Journal of Biomedical Materials Research 45, pp. 48-54 (1999).

91. C.H. Turner, J.-Y. Rho, Y. Takano, T.Y. Tsui, and G.M. Pharr, "The Elastic Properties of Trabecular and Cortical Bone Tissue Are Similar: Results from Two Microscopic Measurement Techniques", Journal of Biomechanics 32, pp. 437-441 (1999).

92. J.C. Hay, A. Bolshakov, and G.M. Pharr, “A Critical Examination of the Fundamental Relations in the Analysis of Nanoindentation Data”, Journal of Materials Research 14, pp. 2296-2305 (1999).

93. J.-Y. Rho and G.M. Pharr, "Effects of Drying on the Mechanical Properties of Bovine Femur Measured by Nanoindentation", Journal of Materials Science: Materials in Medicine 10, pp. 485-488 (1999).

94. J.-Y. Rho, P. Zioupos, J.D. Currey, and G.M. Pharr, "Variations in the Individual Thick Lamellar Properties within Osteons by Nanoindentation", Bone 25, pp. 295-300 (1999).

95. G. Hofmann, M. Wiedenmeier, M. Freund, A. Beavan, J. Hay, and G.M. Pharr, "An Investigation of the Relationship Between Position Within Coater and Pyrolytic Carbon Characteristics Using Nanoindentation", Carbon 38, pp. 645-653 (2000).

96. J.-Y. Rho, P. Zioupos, J.D. Currey, and G.M. Pharr, "Letters to the Editor: Variations in the Individual Thick Lamellar Properties within Osteons by Nanoindentation", Bone 26, pp. 545-546 (2000).

97. J.G. Swadener and G.M. Pharr, "A Methodology for the Calibration of Spherical Indenters", in Thin Films - Stresses and Mechanical Properties VIII, edited by R. Vinci, O. Kraft, N. Moody, P. Besser, and E. Shaffer III, Materials Research Society, Warrendale, PA, pp. 525-530 (2000) [also referenced as Materials Research Society Symposium Proceedings 594, pp. 525-530 (2000)].

47

Publications (cont.) 98. B. Taljat and G.M. Pharr, "Measurement of Residual Stresses by Load and Depth Sensing Spherical

Indentation", in Thin Films - Stresses and Mechanical Properties VIII, edited by R. Vinci, O. Kraft, N. Moody, P. Besser, and E. Shaffer III, Materials Research Society, Warrendale, PA, pp. 519-524 (2000) [also referenced as Materials Research Society Symposium Proceedings 594, pp. 519-524 (2000)].

99. J.-Y. Rho, M. Roy, and G.M. Pharr, "Comments on 'Elastic Modulus and Hardness of Cortical and Trabecular Bone Lamellae Measured by Nanoindentation in the Human Femur' ", Journal of Biomechanics 33, p. 1335 (2000).

100. M.A. Schmidt, D.C. Joy, G.M. Pharr, J.G. Swadener, and J.C. Higgins, "Nanoindentation Results from Direct Molded vs. Machined UHMWPE Tibial Bearings", Transactions of the Sixth World Biomaterials Congress, Volume III, Society for Biomaterials, Minneapolis, MN, p. 1255 (2000).

101. J.G. Swadener and G.M. Pharr, "Indentation of Anisotropic Elastic Half Spaces with Rigid Cones and Parabolas of Revolution", Philosophical Magazine A 81, pp. 447-466 (2001).

102. M.E. Roy, S.K. Nishimoto, J.-Y. Rho, S.K. Bhattacharya, J.S. Lin, and G.M. Pharr, "Correlations Between Osteocalcin Content, Degree of Mineralization, and Mechanical Properties of C. Carpio Rib Bone", Journal of Biomedical Materials Research 54, pp. 547-553 (2001).

103. D.L. Davidson and G.M. Pharr, "Matrix Properties of Textile-Reinforced Ceramic Matrix Composites Measured by Nanoindentation", Journal of Composites Technology and Research 23, pp.102-110 (2001).

104. J.-Y. Rho, J.D. Currey, P. Zioupos, and G.M. Pharr, "The Anisotropic Young's Modulus of Equine Secondary Osteons and Interstitial Bone by Nanoindentation", Journal of Experimental Biology 204 (Pt 10), pp. 1775-1781 (2001).

105. J.G. Swadener, B. Taljat, and G.M. Pharr, "Measurement of Residual Stress by Load and Depth Sensing Indentation with Spherical Indenters", Journal of Materials Research 16, pp. 2091-2102 (2001).

106. E.G. Herbert, G.M. Pharr, W.C. Oliver, B.N. Lucas, and J.L. Hay, "On the Measurement of Stress-Strain Curves by Spherical Indentation", in Fundamentals of Nanoindentation and Nanotribology, edited by S.P. Baker, R.F. Cook, S.G. Corcoran, and N.R. Moody, Materials Research Society, Warrendale, PA, pp. Q3.4.1-6 (2001) [also referenced as Materials Research Society Symposium Proceedings 649, pp. Q3.4.1-6 (2001)].

107. J.G. Swadener, J.-Y. Rho, and G. M. Pharr, "Effects of Anisotropy on Elastic Moduli Measured by Nanoindentation in Human Tibial Cortical Bone", Journal of Biomedical Materials Research 57, pp. 108-112 (2001).

108. M.E. Roy, S.K. Nishimoto, J.-Y. Rho, S.K. Bhattacharya, and G.M. Pharr, "The Distribution of Osteocalcin, Degree of Mineralization, and Mechanical Properties Along the Length of C. Carpio Rib Bone", Journal of Materials Science: Materials in Medicine 12, pp. 699-702 (2001).

109. R. Barabash, G.E. Ice, B.C. Larson, G.M. Pharr, K.-S. Chung, and W. Yang, "White Microbeam Diffraction from Distorted Crystals", Applied Physics Letters 79, pp. 749-751 (2001).

110. E.G. Herbert, G.M. Pharr, W.C. Oliver, B.N. Lucas, and J.L. Hay, "On the Measurement of Stress-Strain Curves by Spherical Indentation", Thin Solid Films 398, pp. 331-335 (2001)].

111. J.-Y. Rho, P. Zioupos, J.D. Currey, and G.M. Pharr, "Microstructural Elasticity and Regional Heterogeneity in Human Femoral Bone of Various Ages Examined by Nanoindentation", Journal of Biomechanics 35, pp.189-198 (2002).

48

Publications (cont.) 112. J.G. Swadener, E.P. George, and G.M. Pharr, "The Correlation of the Indentation Size Effect

Measured with Indenters of Various Shape", Journal of Mechanics and Physics of Solids 50, pp.681-694 (2002).

113. P.M. Anderson, E. Glaser, A.I. Veress, G.M. Pharr, G. Vince, and J.F. Cornhill "Using Indentation and Intra-vascular Ultrasound to Measure Arterial Response”, in Cardiovascular Biomaterials, Materials Research Society Symposium Proceedings 662, pp. MM2.4.1-2.4.6 (2001)].

114. J.-Y. Rho, S.R. Mishra, K. Chung, J. Bai, and G.M. Pharr, "The Relationship Between Ultrastructure and the Nanoindentation Properties of Intramuscular Herring Bones", Annuals of Biomedical Engineering 29, 1082-1088 (2001).

115. J.G. Swadener, E.P. George, and G.M. Pharr, "The Correlation of the Indentation Size Effect for Experiments with Pyramidal and Spherical Indenters", in Thin Films Stresses and Mechanical Properties IX, edited by C.S Ozkan, L.B. Freund, R.C. Cammarata, and H. Gao, Materials Research Society, Warrendale, PA, pp. 451-456 (2002) [also referenced as Materials Research Society Symposium Proceedings 695, pp. 451-456 (2002)].

116. A. Rar, H. Song, and G.M. Pharr, "Assessment for a New Relation for the Elastic Compliance of a Film-Substrate System", in Thin Films Stresses and Mechanical Properties IX, edited by C.S Ozkan, L.B. Freund, R.C. Cammarata, and H. Gao, Materials Research Society, Warrendale, PA, pp. 431-436 (2002) [also referenced as Materials Research Society Symposium Proceedings 695, pp. 431-436 (2002)].

117. Z. Fan, J.G. Swadener, J.Y. Rho, M. Roy, and G.M. Pharr, "Anisotropic Properties of Human Tibial Cortical Bone as Measured by Nanoindentation", Journal of Orthopaedic Research 20, pp. 806-810 (2002).

118. K. Durst, M. Goeken, and G.M. Pharr, “Finite Element Simulation of Spherical Indentation in the Elastic-Plastic Transition”, Zeitschrift fur Metallkunde 93, pp. 857-861 (2002).

119. G.M. Pharr and A. Bolshakov, "Understanding Nanoindentation Unloading Curves", Journal of Materials Research 17, pp. 2660-2671 (2002).

120. H. Bei, E.P. George, and G.M. Pharr, "Effects of Composition on Lamellar Microstructures of Near Eutectic Cr-Cr3Si Alloys", Intermetallics 11, pp. 283-289 (2003).

121. T.Y. Tsui, C.A. Ross, and G.M. Pharr, "A Method for Making Substrate-Independent Hardness Measurements of Soft Metallic Films on Hard Substrates by Nanoindentation", Journal of Materials Research 18, pp. 1383-1391 (2003).

122. H. Bei, E. P. George, and G. M. Pharr, "Effects of Solidification Parameters on Lamellar Microstructures of Near Eutectic Cr-Cr3Si Alloys", in Defect Properties and Related Phenomena in Intermetallic Alloys (eds. E. P. George, H. Inui, M. J. Mills, and G. Eggeler), MRS Symp. Proc., Vol. 753, pp. 71-76, Materials Research Society, Warrendale, PA (2003).

123. E. P. George, H. Bei, K. Serin, and G.M. Pharr, "Microstructure and Thermal Stability of Lamellar Cr-Silicides”, Materials Science Forum 426-432, pp. 4579-4584 (2003).

124. M. P. Brady, I.M. Anderson, M.L. Weaver, H.M. Meyer, L.R. Walker, M.K. Miller, D.J. Larson, I.G. Wright, V.K. Sikka, A. Rar, G.M. Pharr, J.R. Keiser, and C.A. Walls, "Nitrogen Impurity Gettering in Oxide Dispersion Ductilized Chromium", Materials Science and Engineering A358, pp. 243-254 (2003).

125. D. Penumadu, A.Dutta, G.M. Pharr, and B. Files, "Mechanical Properties of Blended Single Wall Carbon Nanotube Composites", Journal of Materials Research 18, pp.1849-1853 (2003).

126. D.Y. Lee, M.L. Santella, I.M. Anderson, and G.M. Pharr, "Microstructure and Oxidation of a Cast Nickel Aluminide Alloy", in Defect Properties and Related Phenomena in Intermetallic Alloys

49

Publications (cont.) (eds. E. P. George, H. Inui, M. J. Mills, and G. Eggeler), MRS Symp. Proc., Vol. 753, pp. 71-76,

Materials Research Society, Warrendale, PA (2003). 127. W. Yang, B.C. Larson, G.M. Pharr, G.E. Ice, J.G. Swadener, J.D. Budai, J.Z. Tischler, and W. Liu,

"X-ray Microbeam Investigation of Deformation Microstructure in Microindented Cu", in Multiscale Phenomena in Materials -- Experiments and Modeling Related to Mechanical Behavior (eds. H.M. Zbib, D.H. Lassila, L.E. Levine, and K.J. Hemker), MRS Symp. Proc., Vol. 779, pp. W.5.34.1-6, Materials Research Society, Warrendale, PA (2003).

128. C.M. Lepienski, G.M. Pharr, Y.J. Park, T.R. Watkins, A. Misra, and X. Zhang, "Factors Limiting the Measurement of Residual Stresses in Thin Films by Nanoindentation", Thin Solid Films 447, pp. 251-257 (2004).

129. Y.J. Park and G.M. Pharr, "Nanoindentation with Spherical Indenters: Finite Element Studies of Deformation in the Elastic-Plastic Transition Regime", Thin Solid Films 447, pp. 246-250 (2004).

130. E.D. Specht, A. Rar, G.M. Pharr, E.P. George, P. Zschack, H. Hong, and J. Ilavsky, “Rapid Structural and Chemical Characterization of Ternary Phase Diagrams Using Synchrotron Radiation”, Journal of Materials Research 18, pp. 2522-2527 (2003).

131. H. Bei, E.P. George, E.A. Kenik, and G.M. Pharr, "Directional Solidification and Microstructures of Cr-Cr3Si Near-Eutectic Alloys", Acta Materialia 51, pp. 6241-6252 (2003).

132. J. Patten, H.P. Cherukuri, G.M Pharr, R.O. Scattergood, W. Gao, and J. Yan, "Ductile Machining Phenomena of Nominally Brittle Materials at the Nanoscale", Proceedings of the Fourth International Conference on Intelligent Processing and Manufacturing of Materials, Sendai, Japan, May 2003.

133. H. Lee, G.M. Pharr, and S.H. Nahm, “Material Property Evaluation of Hyper-elastic Rubber by Microindentation”, Proceedings of the 2003 Annual Meeting of the Society of Experimental Mechanics, Charlotte, NC, July 2003.

134. Y.-T. Cheng, T.F. Page, G.M. Pharr, M.V. Swain, and K.J. Wahl, "Fundamentals and Applications of Instrumented Indentation in Multidisciplinary Research: Introduction", Journal of Materials Research 19, pp. 1-2, 2004.

135. W.C. Oliver and G.M. Pharr, "Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology", Journal of Materials Research 19, pp. 3-20, 2004.

136. D.L. Goldsby, A. Rar, G.M. Pharr, and T.E. Tullis, "Nanoindentation Creep of Quartz with Implications for Rate- and State-Variable Friction Laws Relevant to Earthquake Mechanics", Journal of Materials Research 19, pp. 357-365, 2004.

137. H. Bei, G.M. Pharr, and E.P. George, "A Review of Directionally Solidified Intermetallic Composites for High Temperature Structural Applications", Journal of Materials Science 39, pp. 3975-3984 (2004).

138. Wenge Yang, B.C. Larson, G.M. Pharr, G.E. Ice, J.D. Budai, J.Z. Tischler, and Wenjun Liu, "Deformation Microstructure Under Microindents in Single Crystal Cu Using 3D X-ray Structural Microscopy", Journal of Materials Research 19, pp. 66-72, 2004.

139. B. Taljat and G.M. Pharr, "Development of Pile-up During Spherical Indentation of Elastic-Plastic Solids", International Journal of Solids and Structures 41, pp.3891-3904 (2004).

140. Jae-il Jang, Songqing Wen, M.J. Lance, I.M. Anderson, and G.M. Pharr, "Cracking and Phase Transformation in Silicon During Nanoindentation, in "Thin Films --Stresses and Mechanical Properties X", (eds. S.G. Corcoran, Y.-C. Joo, N.R. Moody, and Z. Suo), MRS Symp. Proc., Vol. 795, pp. U8.15.1-6 (2004).

50

Publications (cont.) 141. A. Rar, E.D. Specht, H.M. Meyer III, M.L. Santella, E.P. George, and G.M. Pharr, "Preparation of

Ternary Alloy Libraries by Means of Thick Film Deposition and Interdiffusion: Structure and Mechanical Properties", in "Combinatorial and Artificial Intelligence Methods in Materials Science", (eds. R.A. Potyrailo, A. Karim, Q. Wang, and T. Chikyow), MRS Symp. Proc., Vol. 804, pp. JJ9.2.1-6 (2004).

142. E.D. Specht, P.D. Rack, A. Rar, G.M. Pharr, E.P. George, and H. Hong, "Nonequilibrium Structures in Codeposited Cr-Fe-Ni Films", in "Combinatorial and Artificial Intelligence Methods in Materials Science", (eds. R.A. Potyrailo, A. Karim, Q. Wang, and T. Chikyow), MRS Symp. Proc., Vol. 804, pp. JJ6.3.1-6 (2004).

143. A. Rar, E.D. Specht, E.P. George, M.L. Santella, and G.M. Pharr, "Preparation of Ternary Alloy Libraries for High-throughput Screening of Material Properties by Means of Thick Film Deposition and Interdiffusion: Benefits and Limitations", Journal of Vacuum Science and Technology A22, pp. 1788 - 1792 (2004).

144. H. Bei, E.P. George, E.A. Kenik, and G.M. Pharr, Microstructures and Mechanical Properties of Directionally Solidified V-V3Si Eutectic Composites, Zeitschrift fur Metallkunde 95, pp. 505-512 (2004).

145. N. Schwarzer and G.M. Pharr, "On the Evaluation of Stresses During Nanoindentation with Sharp Indenters", Thin Solid Films 469-470, pp. 194-200 (2004).

146. H. Bei, E.P. George, and G.M. Pharr, "Elastic Constants of Single Crystal Cr3Si and Cr-Cr3Si Lamellar Eutectic Composites: A Comparison of Ultrasonic and nanoindentation Measurements", Scripta Materialia 51, pp. 875-879 (2004).

147. Wen, S., J. Bentley, J. Jang, I. M. Anderson, and G. M. Pharr, “Characterization of Nanoindentations in Silicon by Cross-Sectional TEM,” Microsc. Microanal. 10 (Suppl. 2), pp. 56-57 (2004).

148. D.Y. Lee, M.L. Santella, I.M. Anderson, and G.M. Pharr, "Thermal Aging Effects on the Microstructure and Short Term Oxidation Behavior of A Cast Ni3Al Alloy", Intermetallics 13, pp. 187-196 (2005).

149. D.Y. Lee, M.L. Santella, I.M. Anderson, and G.M. Pharr, "Long Term Oxidation of An As-Cast Ni3Al Alloy at 900°C and 1100°C", Metallurgical and Materials Transactions 36A, pp.1855-1869 (2005).

150. A. Rar, J. Frafjord, J.D. Fowlkes, E.D. Specht, P. D. Rack, M. L. Santella, E.P. George, and G. M. Pharr, "PVD Synthesis and High-Throughput Property Characterization of Ni-Fe-Cr Alloy Libraries", Measurement Science and Technology 16, pp.46-53 (2005) .

151. Jae-il Jang, M.J. Lance, S. Wen, T.Y. Tsui, and G.M. Pharr, "Indentation-Induced Phase Transformations in Silicon: Influences of Load, Rate and Indenter Angle on the Transformation Behavior", Acta Materialia 53, pp. 1759-1770 (2005).

152. J.A. LaManna, W.C. Oliver, and G.M. Pharr, "On the Measurement of Material Creep Parameters by Nanoindentation", in Fundamentals of Nanoindentation and Nanotribology III (edited by D.F. Bahr, Y.-T. Cheng, N. Huber, A.B. Mann, and K.J. Wahl), Warrendale, PA, pp. 147-152 (2005); also referenced as Mater. Res. Soc. Symp. Proc. 841, pp. 147-152 (2005).

153. S. Wen, J. Bentley, Jae-il Jang, and G.M. Pharr, "Cross sectional TEM studies of indentation-induced phase transformation in Si: indenter angle effects," in Fundamentals of Nanoindentation and Nanotribology III (edited by D.F. Bahr, Y.-T. Cheng, N. Huber, A.B. Mann, and K.J. Wahl), Warrendale, PA, pp. 279-284 (2005); also referenced as Mater. Res. Soc. Symp. Proc. 841, pp. 279-284 (2005).

51

Publications (cont.) 154. Jae-il Jang, M.J. Lance, S. Wen, J.J. Huening, R.J. Nemanich, and G.M. Pharr, "Micro-Raman

Mapping and Analysis of Indentation-Induced Phase Transformations in Germanium", in Fundamentals of Nanoindentation and Nanotribology III (edited by D.F. Bahr, Y.-T. Cheng, N. Huber, A.B. Mann, and K.J. Wahl), pp. 277-282 (2005); also referenced as Mater. Res. Soc. Symp. Proc. 841, pp. 277-282 (2005).

155. J.J.H. Walter, M. Liang, X.-B. Chen, J.-I. Jang, L. Bergman, J.A. Patten, G.M. Pharr, and R.J. Nemanich, "UV Raman Scattering Analysis of Indented and Machined 6H-SiC and b-Si3N4 Surfaces", in Surface Engineering - Fundamentals and Applications (edited by J.E. Krzanowski, S.N. Basu, J. Patscheider, Y. Gogotsi), pp. 75-80 (2005); also referenced as Mater. Res. Soc. Symp. Proc. 843, pp. 75-80 (2005).

156. Hyungyil Lee, Jin Haeng Lee, and George M. Pharr, "A Numerical Approach to Spherical Indentation Techniques for Material Property Evaluation", Journal of the Mechanics and Physics of Solids 53, pp. 2037–2069 (2005).

157. A. Rar, S. Sohn, W.C. Oliver, D.L. Goldsby, T.E. Tullis, and G.M. Pharr, "On the Measurement of Creep by Nanoindentation with Continuous Stiffness Techniques", in Fundamentals of Nanoindentation and Nanotribology III (edited by D.F. Bahr, Y.-T. Cheng, N. Huber, A.B. Mann, and K.J. Wahl), Warrendale, PA, pp. 119-124 (2005); also referenced as Mater. Res. Soc. Symp. Proc. 841, pp. 119-124 (2005).

158. J.H. Strader, S. Shim, H. Bei, W.C. Oliver, and G.M. Pharr, "An Experimental Evaluation of the Constant b Relating the Contact Stiffness to the Contact Area in Nanoindentation", in Fundamentals of Nanoindentation and Nanotribology III (edited by D.F. Bahr, Y.-T. Cheng, N. Huber, A.B. Mann, and K.J. Wahl), Warrendale, PA, pp. 9-14 (2005); also referenced as Mater. Res. Soc. Symp. Proc. 841, pp. 9-14 (2005).

159. S. Shim, H. Bei, W.C. Oliver, and G.M. Pharr, "A Critical Examination of the Actual Contact Area Used in Analyzing Nanoindentation Data Based on 3D Finite Element Modeling", in Fundamentals of Nanoindentation and Nanotribology III (edited by D.F. Bahr, Y.-T. Cheng, N. Huber, A.B. Mann, and K.J. Wahl), Warrendale, PA, pp. 39-44 (2005); also referenced as Mater. Res. Soc. Symp. Proc. 841, pp. 39-44 (2005).

160. Jae-il Jang, M.J. Lance, S. Wen, and G.M. Pharr, "Evidence for Nanoindentation-Induced Phase Transformations in Germanium", Applied Physics Letters 86, pp. 131907:1-3 (2005).

161. H. Bei, E.P. George, J.L. Hay, and G.M. Pharr, "Influence of Indenter Tip Geometry on Elastic Deformation During Nanoindentation", Physical Review Letters 95, 045501 (2005).

162. H. Bei, E. P. George, D.W. Brown, G.M. Pharr, H. Choo, W.D. Porter, and M.A.M. Bourke, "Thermal Expansion Behavior of a Directionally Solidified NiAl-Mo Composite Investigated by Neutron Diffraction and Dilatometry", Journal of Applied Physics 97, 123503 1-5 (2005).

163. E.D. Specht, P.D. Rack, A. Rar, G.M. Pharr, E.P. George, J.D. Fowlkes, H. Hong, and E. Karapetrova, "Metastable Phase Evolution and Grain Growth in Annealed Nanocrystalline Cr-Fe-Ni Films", Thin Solid Films 493, pp. 307-312 (2005).

164. S. Qu, Y. Huang, G.M. Pharr, and K.C. Huang, "The Indentation Size Effect in the Spherical Indentation of Iridium: A Study via the Conventional Theory of Mechanism-Based Strain Gradient Plasticity", International Journal of Plasticity 22, pp. 1265-1286 (2006).

165. N. Schwarzer, T. Chudoba, and G.M. Pharr, "On the Evaluation of Stresses in Coated Materials During Nanoindentation with Sharp Indenters", Surface and Coatings Technology 200, pp. 4220-4226 (2006).

52

Publications (cont.) 166. Andrei Rar, G.M. Pharr, W.C. Oliver, E. Karapetian, and Sergei V. Kalinin, "Piezoelectric

Nanoindentation", Journal of Materials Research 21, pp. 552-556 (2006). 167. N.M. Jennett, G.M. Pharr, and C.J. McHargue, "Instrumented Indentation Testing in Materials

Research and Development", Philosophical Magazine 86, pp. 5153-5155 (2006). 168. Jeremy H. Strader, Sanghoon Shim, Hongbin Bei, W.C. Oliver, and G.M. Pharr, "An Experimental

Evaluation of the Constant b Relating the Contact Stiffness to the Contact Area in Nanoindentation", Philosophical Magazine 86, pp. 5285-5298 (2006).

169. Y. Huang, F. Zhang, K.C. Hwang, W.D. Nix, G.M. Pharr, and G. Feng, "A Model of Size Effects in Nanoindentation", Journal of the Mechanics and Physics of Solids 54, pp. 1668-1686 (2006).

170. E.G. Herbert, W.C. Oliver, and G.M. Pharr, "On the Measurement of Yield Strength by Spherical Indentation", Philosophical Magazine 86, pp. 5521-5539 (2006).

171. Haitao Xu and G.M. Pharr, "An Improved Relation for the Elastic Compliance of a -Film/Substrate System During Indentation with Flat Cylindrical Punch", Scripta Materialia 55, pp. 315-318 (2006).

172. Y.F. Gao, B.N. Lucas, J.C. Hay, W.C. Oliver, and G.M. Pharr, "Nanoscale Incipient Asperity Sliding and Interface Micro-slip Assessed by the Measurement of Tangential Contact Stiffness", Scripta Materialia 55, pp. 653-656 (2006).

173. S. Wang, S.H. Lee, W.T.Y. Tze, G.M. Pharr, and T.G. Rials, "Investigating Nano-mechanical Properties of Wood and Its Composites by Nanoindentation", Proceedings of the 8th Pacific Rim Bio-based Composites Symposium, pp. 328-333 (2006).

174. M Kant, D. Penumadu, and G.M. Pharr, "Mechanical Properties of Fibers Using Nano-Tensile Testing", in Nanomechanical Characterization and Size Dependent Mechanical Propoerties, Proceedings of the 2006 Materials Science and Technology Conference (2006).

175. W.T.Y. Tze, S. Wang, T.G. Rials, G.M. Pharr, and S.S. Kelley, "Nanoindentation of Wood Cell Walls: Continuous Stiffness and Hardness Measurements", Composites: Part A - Applied Science and Manufacturing 38, pp. 945-953 (2007).

176. Y. Huang, X. Feng, G.M. Pharr, and K.C. Wang, "A Nanoindentation Model for Spherical Indenters", Modeling and Simulation in Materials Science and Engineering 15, pp. S255-S262 (2007).

177. S.-H. Lee, Y. Teramoto, S. Wang, G.M. Pharr, and T.G. Rials, "Nanoindentation of Biodegradable Cellulose Diacetate-graft-Poly(L-lactide) Copolymers: Effect of Molecular Composition and Thermal Aging on Mechanical Properties", Journal of Polymer Science: Part B: Polymer Physics 45, pp. 1114-1121 (2007).

178. S. Shim, W.C. Oliver, and G.M. Pharr, "A Comparison of 3D Finite Element Simulations for Berkovich and Conical Indentation of Fused Silica", International Journal of Surface Science and Engineering 1, pp. 259-273 (2007).

179. Y.P. Deng, Y.F. Guan, J.D. Fowlkes, S.Q. Wen, F.X. Liu, G.M. Pharr, P.K. Liaw, C.T. Liu, and P.D. Rack, "A Combinatorial Thin Film Sputtering Approach for Synthesizing and Characterizing Ternary ZrCuAl Metallic Glasses", Intermetallics 15, pp. 1208-1216 (2007).

180. Y.F. Gao and G.M. Pharr, "Multidimensional Contact Moduli of Elastically Anisotropic Solids", Scripta Materialia 57, pp. 13-16 (2007).

181. S.-H. Lee, S. Wang, G.M. Pharr, M. Kant, and D. Penumadu, "Mechanical Properties and Creep Behavior of Lyocell Fibers by Nanoindentation and Nanotensile Testing", Holzforschung 61, pp. 254-260 (2007).

53

Publications (cont.) 182. H. Bei, S. Shim, E.P. George, M.K. Miller, E.G. Herbert, and G.M. Pharr, "Compressive Strengths

of Molybdenum Alloy Micro-Pillars Prepared Using a New Technique", Scripta Materialia 57, pp. 397-400 (2007).

183. Seung-Hwan Lee, Siqun Wang, G.M. Pharr, and H. Xu, "Evaluation of Interphase Properties in a Cellulose Fiber-Reinforced Polypropylene Composite by Nanoindentation and Finite Element Analysis", Composites: Part A, Applied Science and Manufacturing 38, pp. 1517-1524 (2007).

184. J. Qin, Y. Huang, K.C. Hwang, J. Song and G.M. Pharr, "The Effect of Indenter Angle on the Microindentation Hardness", Acta Materialia 55, pp. 6127-6132 (2007).

185. H. Bei, S. Shim, M.K. Miller, G. M. Pharr, and E. P. George, "Effects of Focused Ion Beam Milling on the Nanomechanical Behavior of a Molybdenum-Alloy Single Crystal", Applied Physics Letters 91, 111915 (2007).

186. K. Durst, M. Goken, and G.M. Pharr, "Indentation Size Effect in Spherical and Pyramidal Indentations", Journal of Physics D: Applied Physics 41, 074005 (2008).

187. E.G. Herbert, W.C. Oliver, and G.M. Pharr, "Nanoindentation and the Dynamic Characterization of Viscoelastic Solids", Journal of Physics D: Applied Physics 41, 074021 (2008).

188. H. Bei, Y.F. Gao, S. Shim, E.P. George, and G.M. Pharr, "Strength Differences Arising from Homogeneous vs. Heterogeneous Dislocation Nucleation", Physical Review B 77, 060103 (2008).

189. C. Xing, S. Wang, G.M. Pharr, and L.H. Groom, "Effect of thermo-mechanical refining pressure on the properties of wood fibers: Measured by nanoindentation and AFM", Holzforschung 62, pp. 230-236 (2008).

190. Y.F. Gao, H. Xu, W.C. Oliver, and G.M. Pharr, "A Comparison of Coulomb Friction and Friction Stress Models Based on Multidimensional Nanocontact Experiments", Journal of Applied Mechanics 75, pp. 034504 1-3 (2008).

191. H. Bei, E.P. George, and G.M. Pharr, "Small-scale Mechanical Behavior of Intermetallics and Their Composites", Materials Science and Engineering A 483-484, pp. 218-222 (2008).

192. Y.F. Gao, H.T. Xu, W.C. Oliver, and G.M. Pharr, "Effective Elastic Modulus of Film-on-Substrate Systems Under Normal and Tangential Contact", Journal of the Mechanics and Physics of Solids 56, pp. 402-416 (2008).

193. Sanghoon Shim, Jae-il Jang, and G.M. Pharr, "Extraction of Flow Properties of Single-Crystal Silicon Carbide by Nanoindentation and Finite-Element Simulation", Acta Materialia 56, pp. 3824-3832 (2008).

194. Jae-il Jang and G.M. Pharr, "Influence of Indenter Angle on Cracking in Si and Ge During Nanoindentation", Acta Materialia 56, pp. 4458-4469 (2008).

195. H. Bei, S. Shim, G.M. Pharr, and E.P. George, "Effects of Pre-strain on the Compressive Stress-Strain Response of Mo-alloy Single Crystal Micro-pillars", Acta Materialia 56, pp. 4762-4770 (2008).

196. S. Shim, H. Bei, E.P. George, and G.M. Pharr, "A Different Type of Indentation Size Effect", Scripta Materialia 59, pp. 1095-1098 (2008).

197. S. Shim, H. Bei, M.K. Miller, G.M. Pharr, and E.P. George, "Effects of Focused Ion Beam Milling on the Compressive Behavior of Directionally Solidified Micro-pillars and the Nanoindentation Response of an Electro-polished Surface", Acta Materialia 57, pp. 503-510 (2009).

198. G.M. Pharr, Y.-T. Cheng, I.M. Hutchings, M. Sakai, N.R. Moody, G. Sundararajan, and M.V. Swain, "Indentation Methods in Advanced Materials Research", Journal of Materials Research 24, pp. 579-580 (2009).

54

Publications (cont.) 199. E.G. Herbert, W.C. Oliver, A. Lumsdaine, and G.M. Pharr, "Measuring the Constitutive Behavior

of Viscoelastic Solids in the Time and Frequency Domain Using Flat Punch Nanoindentation", Journal of Materials Research 24, pp. 626-637 (2009).

200. G.M. Pharr, J.H. Strader, and W.C. Oliver, "Critical Issues in Making Small-depth Mechanical Property Measurements by Nanoindentation with Continuous Stiffness Measurement", Journal of Materials Research 24, pp. 653-666 (2009).

201. T.L. Li, J.H. Lee, Y.F. Gao, G.M. Pharr, M. Huang, and T.Y. Tsui, "Geometric Effects on Dislocation Nucleation in Strained Electronics", Applied Physics Letters 94, pp. 17095:1-3, (2009).

202. E.G. Herbert, W.C. Oliver, M.P. de Boer, and G.M. Pharr, "Measuring the Elastic Modulus and Residual Stress of Free-Standing Thin Films Using Nanoindentation Techniques", Journal of Materials Research 24, pp. 2974-2985 (2009).

203. C. Xing, S. Wang, and G.M. Pharr, "Nanoindentation of Juvenile and Mature Loblolly Pine (Pinus taeda L.) Wood Fibers as Affected by Thermomechanical Refining Pressure", Wood Science and Technology 43, pp. 615-625 (2009).

204. Y.F. Gao, C. Zhou, J.H. Lee, B.C. Larson, and G.M. Pharr, "Similarity Relationships and Lattice Rotations in the Nanoindentation Behavior of Single Crystals", Proceedings of the NSF CMMI Research and Innovation Conference, June 22-25, 2009, Honolulu, Hawaii.

205. G.M. Pharr, E.G. Herbert, and Y.F. Gao, "The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations", Annual Reviews in Materials Research 40, pp. 271-290 (2010).

206. C.J. Su, J.A. LaManna, Y.F. Gao, W.C. Oliver, and G.M. Pharr, "Plastic Instability in Amorphous Selenium Near its Glass Transition Temperature", Journal of Materials Research 25, pp. 1015-1019 (2010).

207. W.C. Oliver and G.M. Pharr, "Nanoindentation in Materials Research: Past, Present, and Future", MRS Bulletin 35, pp. 897-907 (2010).

208. J.H. Lee, C. Zhou, C.J. Su, Y.F. Gao, and G.M. Pharr, "Similarity Relationships in Creep Contacts and Applications in Nanoindentation Tests", Materials Research Society Symposium Proceedings 1224, FF07-08 (2010).

209. C. Begau, A. Hartmaier, E.P. George, and G.M. Pharr, Atomic Processes of Dislocation Generation and Plastic Deformation During Nanoindentation", Acta Materialia 59, pp. 934-942 (2011).

210. P. Sudharshan Phani, K. Johanns, A. Gali, G. Duscher, E.P. George, and G.M. Pharr, "Scanning Transmission Electron Microscope Observations of Defects in As-Grown and Pre-strained Mo Alloy Fibers", Acta Materialia 59, pp. 2172-2179 (2011).

211. X.H. Bi, C.A. Patil, C.C. Lynch, G.M. Pharr, A. Mahadevan-Jansen, and J.S. Nyman, “Raman and Mechanical Properties Correlate at the Whole Bone- and Tissue-Levels in a Genetic Mouse Model”, Journal of Biomechanics 44, pp. 297-303 (2011).

212. J.R. Morris, H. Bei, G.M. Pharr, and E.P. George, “Size Effects and Stochastic Behavior of Nanoindentation Pop-in”, Physical Review Letters 106, 165502:1-4 (2011).

213. J.S. Nyman, C.C. Lynch, D.S. Perrien, S. Thiolloy, E.C. O'Quinn, C.A. Patil, X. Bi, G.M. Pharr, A. Mahadevan-Jansen, and G.R. Mundy, “Differential Effects Between the Loss of MMP-2 and MMP-9 on Structural and Tissue-Level Properties of Bone”, Journal of Bone and Mineral Research 26, pp. 1252-1260 (2011).

214. Z. Wang, H. Bei, E.P. George, and G.M. Pharr, "Influences of Surface Preparation on Nanoindentation Pop-in in Single-Crystal Mo", Scripta Materialia 65, 469-472 (2011).

55

Publications (cont.) 215. M. Sebastiani, C. Eberl, E. Bemporad, and G.M. Pharr, "Depth-resolved Residual Stress Analysis

of Thin Coatings by a New FIB-DIC Method", Materials Science and Engineering A528, pp. 7901-7908 (2011).

216. J.P. Shingledecker and G.M. Pharr, "The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL® Alloy 740 at 1023 K (750°C)", Metallurgical and Materials Transactions A 43, pp. 1902-1910 (2012).

217. E.G. Herbert, W.E. Tenhaeff, N.J. Dudney, and G.M. Pharr, "Mechanical Characterization of LiPON Films Using Nanoindentation", Thin Sold Films 520, pp. 413-418 (2012).

218. J.H. Lee, Y.F. Gao, and G.M. Pharr, "Effective Poisson’s Ratio from Multiaxial Contacts of Single Crystals", Journal of Materials Research 27, pp. 182-191 (2012).

219. K.E. Johanns, A. Sedlmayr, P. Sudharshan Phani, R. Mönig, O. Kraft, E.P. George, and G.M.Pharr, "In-Situ Tensile Testing of Single Crystal Molybdenum Alloy Fibers with Various Dislocation Densities in a Scanning Electron Microscope", Journal of Materials Research 27, pp. 508-520 (2012).

220. J.-I. Jang, H. Bei, P.F. Becher, and G.M. Pharr, "Experimental Analysis of the Elastic–Plastic Transition During Nanoindentation of Single Crystal a-Silicon Nitride", Journal of the American Ceramic Society 95, pp. 2113-2115 (2012).

221. J.H. Lee, Y.F. Gao, K.E. Johanns, and G.M. Pharr, "Cohesive Interface Simulations of Indentation Cracking as a Fracture Toughness Measurement Method for Brittle Materials", Acta Materialia 60, pp. 5448-5467 (2012).

222. G. Dehm, G.M. Pharr, and J. Michler, "Nanomechanical Testing in Materials Research and Development III", Philosophical Magazine 92, pp. 3125-3127 (2012).

223. Caijun Su, E.G. Herbert, Sangjoon Sohn, J.A. Lamanna, W.C. Oliver, and G.M. Pharr, "Measurement of Power-law Creep Parameters by Instrumented Indentation Methods", Journal of the Mechanics and Physics of Solids 61, pp. 517-536 (2013).

224. J.P. Shingledecker and G.M. Pharr, "Testing and Analysis of Full-Scale Creep Rupture Experiments on Inconel 740 Cold-Formed Tubing", Journal of Materials Engineering and Performance 22, pp. 454-462 (2013).

225. P. Sudharshan Phani, K.E. Johanns, E.P. George, and G.M. Pharr, “A Simple Stochastic Model for Yielding in Specimens with a Limited Number of Dislocations”, Acta Materialia 61, pp. 2489-2499 (2013).

226. D. Catoor, Y.F. Gao, J. Geng, M.J.N.V. Prasad, E.G. Herbert, K.S. Kumar, G.M. Pharr, and E.P. George, “Incipient Plasticity and Deformation Mechanisms in Single Crystal Mg During Spherical Nanoindentation”, Acta Materialia 61, pp. 2953-2965 (2013).

227. J.P. Shingledecker, N.D. Evans, and G.M. Pharr, " Influences of Composition and Grain Size on Creep-Rupture Behavior of Inconel® Alloy 740", Materials Science and Engineering A 578, pp. 277-286 (2013).

228. J. Kwon, M.C. Brandes, P. Sudharshan Phani, A.P. Pilchak, Y.F. Gao, E.P. George, G.M. Pharr, and M.J. Mills, "Characterization of Deformation Anisotropies in an α-Ti Alloy by Nanoindentation and Electron Microscopy", Acta Materialia 61, pp. 4743-4756 (2013).

229. P. Sudharshan Phani, K.E. Johanns, E.P. George, and G.M. Pharr, “A Stochastic Model for the Size Dependence of Spherical Indentation Pop-in”, Journal of Materials Research 28, pp. 2728-2739 (2013).

56

Publications (cont.) 230. E.G. Herbert, K.E. Johanns, R.S. Singleton, and G.M. Pharr, “On the Measurement of Energy Dissipation Using Nanoindentation and the Continuous Stiffness Technique”, Journal of Materials

Research 28, pp. 3029-3042 (2013). 231. Z. Wu, H. Bei, F. Otto, G.M. Pharr, and E.P. George, "Recovery, Recrystallization, Grain Growth

and Phase Stability of a Family of FCC-Structured Multi-Component Equiatomic Solid Solution Alloys", Intermetallics 46, pp. 131-140 (2014).

232. K.E. Johanns, J.H. Lee, Y.F. Gao, and G.M. Pharr, “An Evaluation of the Advantages and Limitations of Simulating Indentation Cracking with Cohesive Zone Finite Elements”, Modeling and Simulation in Materials Science and Engineering 22, 015011 (2014).

233. M. Sebastiani, A.M. Korsunsky, C. Eberl, E. Bemporad, and G.M. Pharr, "Discussion on 'Interfacial Residual Stress Analysis of Thermal Spray Coatings by Miniature Ring-Core Cutting Combined with DIC Method", Experimental Mechanics 54, pp. 1305-1306 (2014).

234. Z. Wu, H. Bei, G.M. Pharr, and E.P. George, "Temperature Dependence of the Mechanical Properties of Equiatomic Solid Solution Alloys with FCC Crystal Structures", Acta Materialia 81, pp. 428-441 (2014).

235. J. Kwon, M.L. Bowers, M.C. Brandes, V. McCreary, I.M. Robertson, P. Sudharshan Phani, H. Bei, Y.F. Gao, G.M. Pharr, E.P. George, and M.J. Mills, "Characterization of Dislocation Networks and Deformation Mechanisms in As-Grown and Deformed Directionally Solidified NiAl-Mo Composites", Acta Materialia 89, pp. 315-326 (2015).

236. Y.F. Gao, B.C. Larson, J.H. Lee, L. Nicola, J.Z. Tischler, and G.M. Pharr, "Lattice Rotation Patterns and Strain Gradient Effects in Single Crystals Under Spherical Indentation", Journal of Applied Mechanics 82, 061007:1-10 (2015).

237. M. Sebastiani, K.E. Johanns, E.G. Herbert, E. Bemporad, F. Carassiti, and G.M. Pharr, "A Novel Pillar Splitting Indentation Test for Measuring Fracture Toughness of Thin Ceramic Coatings", Philosophical Magazine 95, pp. 1928-1944 (2015).

238. D.B. Marshall, R.F. Cook, N.P. Padture, M.L. Oyen, A. Pajares, J.G. Bradby, I.E. Reimanis, R. Tandon, T.F. Page, G.M. Pharr, and B.R. Lawn, "The Compelling Case for Indentation as a Functional Exploratory and Characterization Tool", Journal of the American Ceramic Society 98, pp. 2671-2680 (2015).

239. M. Sebastiani, K.E. Johanns, E.G. Herbert, and G.M. Pharr, "Measurement of Fracture Toughness by Nanoindentation Methods: Recent Advances and Future Challenges", Current Opinion in Solid State and Materials Science 19, pp. 315-316 (2015).

240. G.M. Pharr, "Recent Advances in Small-Scale Mechanical Property Testing by Nanoindentation", Current Opinion in Solid State and Materials Science 19, pp. 324-333 (2015).

241. A. Datye, Lin Li, Wei Zhang, Yujie Wei, Yanfei Gao, and G.M. Pharr, "Extraction of Anisotropic Mechanical Properties from Nanoindentation of SiC-6H Single Crystals", Journal of Applied Mechanics 83, pp. 091003 1-7 (2016).

242. Y.Z. Xia, Y.F. Gao, G.M. Pharr, and H. Bei, "Single versus Successive Pop-in modes in Nanoindentation Tests of Single Crystals", Journal of Materials Research 31, pp. 2065-2075 (2016).

243. J.S. Nyman, M. Granke, R.C. Singleton, and G.M. Pharr, "Tissue-Level Mechanical Properties of Bone Contributing to Fracture Risk", Current Osteoporosis Reports 14, pp. 138-150 (2016).

244. S. Bruns, K. E. Johanns, H. Rehman, G.M. Pharr, and K. Durst, "Constitutive Modeling of Indentation Cracking in Fused Silica", in press, Journal of the American Ceramic Society.

57

Publications (cont.) 245. J. Miao, C.E. Slone, T.M. Smith, C. Niu, H. Bei, M. Ghazisaeidi, G.M. Pharr, and M.J. Mills,

"Deformation Substructure Evolution in a Ni-Co-Cr Solid Solution High Entropy Alloy", submitted, Acta Materialia.

Books and Book Chapters 1. M.F. Doerner, W.C. Oliver, G.M. Pharr, and F.R. Brotzen (editors), Thin Films: Stresses and

Mechanical Properties II, Materials Research Society Symposium Proceedings 188, Materials Research Society, Pittsburgh (1990).

2. R.F. Cook and G.M. Pharr, "Mechanical Properties of Ceramics", book chapter in Materials Science and Technology: A Comprehensive Treatment, edited by R.W. Cahn, P. Haasen, and E.J. Kramer, in Volume 11: Structure and Properties of Ceramics (Michael V. Swain - volume editor), pp. 339-407, VCH Publishers, Inc., New York (1994).

3. J.-Y. Rho and G.M. Pharr, "Nanoindentation Testing of Bone", book chapter in Mechanical Testing of Bone and the Bone-Implant Interface, edited by Y.H. An and R.H. Draughn, pp. 257-269, CRC Press, Boca Raton, FL (2000).

4. J.L. Hay and G.M. Pharr, "Instrumented Indentation Testing", book chapter in ASM Handbook Volume 8: Mechanical Testing and Evaluation (10th edition), edited by H. Kuhn and D. Medlin, pp. 232-243 , ASM International, Materials Park, OH (2000).

February 2017