Embed Size (px)
Citation preview
GEONEX OY is a Finnish company, specialized in manufacturing, armament and sales of DTH-/Hammer drilling machines and accessories for those. We have long experience behind Geonex as Contractors in the Nordic countries in the field of Foundation Pile Drilling with Down The Hole Hammer. That expe-rience we have used in the development of our Geonex-products and services. We have an on-going develop-ment of new and user-friendly DTHsolutions.
GEONEX DTH DRILLING VERTICAL DRILLING SOLUTION
www.geonex.fi
GEONEX DTH Vertical drilling solutions
The base of each Geonex-DTH Drilling solution has an excellent performance, state of the art reliability, technique and eff iciency. We have focused on design of the details as well whichincreases the productivity even more.
MAIN FEATURES AND APPLICATIONS OF DTH-HAMMER DRILLED PILES
GEONEX FOUNDATION PILING RIG ARMAMENT FOR HAMMER PILING
Piling with Down The Hole Hammer is growing solution for foundation piles in rocky and mixed soil types, where rock contact is necessary. Geonex provides armament and consutation for modifying Kelly Bar, CFA and Impact Piling rigs for Hammer Drilling applications.
• Drilled piles are installed through all soil layers to the desired depth, even all the way to bedrock.
• The soil contains obstacles in the soil that are difficult to penetrate such as stones, boulders etc.
• Pile diameters up to 1220 mm.
• Piles bear securely on bedrock.
• The bedrock is slant and piles need to be drilled into bedrock to prevented from sliding.
• Piles can carry high loads, which leads to reduced pile amount.
• The piles have high precision and quality requirements
• Piling work can be carried out near existing buildings or structures, where there are strict requirements for the environmental impacts of the piling, such as vibration, soil settlement and diplacements
Geonex can supply a total solution, which covers all your DTH-drilling needs. We can provide project consulting, needed drilling equipment, coordinating drilling machinery, staff training and full deployment of the contracting work.
CONSULTATION, SERVICE, REPAIR AND TRAINING
• If you have project or you are planning one, please don’t hesitate to contact us.
• We can provide knowledge from over 20 years of horizontal drilling experience to you.
• Over 10 000 holes and 200 000 m.
The base of each Geonex-DTH Drilling solution has an excellent performance, state of the artreliability, technique and eff iciency. We have focused on design of the details as well whichincreases the productivity even more.
VERTICAL DTH-DRILLING PRODUCTS
• DTH-Hammer oilers
• Clamp-sets
• DTH-Drilling Rotary Heads
• Overburden drilling systems
• DTH-Hammers 6-38”
• HEX & API REG Drilling rods
• Break-out benches and tools
• DTH-Hammer Air Valves
CONTACT INFORMATION
Tuomas LassheikkiR&D+358 40 910 [email protected]
Kimmo JuvaniCEO+358 400 693 [email protected]
Geonex OyTeollisuustie 9FI-95600 YlitornioFinlandwww.geonex.fi
BY CHOOSING GEONEX PRODUCTS
YOU ARE EQUIPPED FOR THE MOST
DEMANDING CONDITIONS.
Geonex suits for different kind of drilling commitments and soil types around the world. Geonex reliability, user convenience and efficiency are
unbeatable especially in mixed and rocky soil conditions.
