GEOMEMBRANE LINER PRODUCT GUIDE

TM

i build with

TA P E S & F I L M S • PA C K A G I N G P R O D U C T S & S Y S T E M S

B U I L D I N G M AT E R I A L S • E N G I N E E R E D C O AT E D P R O D U C T S

Aquamaster® GeomembranesFrom agricultural irrigation to industrial applications, Aquamaster® is the proven choice for your site requirements.

IPG® offers a series of complementary products such as geomembrane seam/ repair tape and two-sided pipe boot/patching tape. To find out more information about these or any other IPG® products, contact your IPG® Sales representative.

Aquamaster® from IPG® offers sound solutions for water resource management and a wide range of industrial applications such as conventional and non-conventional oil & gas extraction, above ground tank liners and other applications where a high strength, durable barrier is needed.

Our geomembrane portfolio is comprised of two product families: NovaLiner™ for shorter term applications with shorter warranties and our ArmorLiner™ line for more demanding applications, with longer warranty coverage.

• Lighter weight for more cost effective transportation

• Wide widths which mean fewer seams

• Can be factory prefabricated for faster and easier installations than field seaming

• Extra strong to provide added resistance to tears and punctures

• Engineered coatings provide exceptional hydrostatic resistance and heat seaming weldability

• Technologically designed for UV resistance

• Custom colors available

BE

NE

FITS

Aquamaster® woven coated fabric liners

incorporate exclusive polyolefin coatings for

maximum toughness and abrasion resistance.

These liners are available in medium or

heavy-weight fabrics with varying coating

thicknesses and colors depending on your

site requirements.

Aquamaster® liners feature unique benefits

that make it the most effective and

economical choice.

Designed for Easy Installation and Long Life

Water Management

• Settling basins

• Landfill reservoirs

• Golf course ponds and other aesthetic features

• Snowmaking water reserve ponds

Aquacultural & Agricultural

• Algae harvesting support ponds

• Irrigation canals and ponds

• Aquaculture tank liners

• Raceway ponds

Oil & Gas

• Hydraulic fracturing wastewater containment

• Evaporation ponds

• Temporary and permanent oilfield pit liners

• Above ground impoundments

• Containment booms

Municipal

• Fire reservoirs

• Road Construction and Other D.O.T. Applications

• Storm water detention and retention ponds

• Drainage systems

AP

PLIC

ATION

SDesigned for Your NeedsWhether your jobsite is in the arid regions of the American South West or the Canadian Arctic, IPG®

has the right product for your needs. The exclusive Aquamaster® product line is the perfect choice for:

800- IPG-8273 / 800-474-8273www.i tape.com | E-mai l : in fo@itape.com

©2014 Intertape Polymer Group® • AQUAMASTER BR • 1791-031714

TM

i build with

Developed and manufactured by IPG®, Aquamaster® ArmorLiner™ and

NovaLiner™ products are produced using state-of-the-art production

facilities in Canada and the USA. Our team takes the time to understand

your unique needs and will help you select the Aquamaster® product

that will deliver the performance that you require.

Our unique manufacturing and distribution

network can help you gain a competitive

edge through:

• Faster product turnaround

• Attention to quality – ISO 9001:2008 Certified Company

• Industry leading warranties

• Designed to meet the unique demands of your site requirements

• Recyclable where facilities exist

ASTM Standard

NovaLiner 12Short Term

Liner

NovaLiner 16Short Term

Liner

NovaLiner 20Short Term

Liner

NovaLiner 24Short Term

Liner

NovaLiner 30Short Term

Liner

NovaLiner 24NWLNon-Woven

Laminate

Base Fabric Black HDPE Black HDPE Black HDPE Black HDPE Black HDPE Black HDPE

Coating LDPE LDPE LDPE LDPE LDPE LDPE

Weight oz/sq yd (gsm)

D5261 5.2 (176) 7.2 (244) 9.4 (318) 10.0 (340) 12.2 (415) 13.9 (471)

Thickness mils (mm)

D177712 (0.30) +/- 10%

16 (0.40) +/- 10%

20 (0.50)+/- 10%

24 (0.60)+/- 10%

30 (0.75)+/- 10%

24 (0.6)+/- 10%*

Grab Tensile lb (N)

D7004MD 180 (800) / TD 125 (555)

MD 210 (932) /TD 190 (840)

MD 250 (1100) /TD 300 (1332)

MD 335 (1487) / TD 350 (1554)

MD 295 (1310) / TD 320 (1420)

MD 335 (1487) / TD 340 (1509)

Tongue Tear - Large Scale lb (N)

D5884MD 50 (222) / TD 50 (222)

MD 60 (266) / TD 60 (266)

MD 65 (288) / TD 75 (333)

MD 145 (643) /TD 150 (666)

MD 65 (288) / TD 85 (377)

MD 150 (666) / TD 150 (666)

Mullen Burst psi (kPa)

D751 275 (1894) 375 (2583) 550 (2442) 670 (4616) 610 (4203) 650 (4478)

Hydrostatic Resistance psi (kPa)

D751 130 (900) 97 (672) 139 (957) 262 (1803) 423 (2917) 217 (1495)

Hydraulic Conductivity cm/s

Calc. MVTR E96

0.88 x 10-12 1.27 x 10-12 1.97 x 10-12 1.77 x 10-12 1.87 x 10-12 7.73 x 10-12

Puncture Resistance lb (N)

D4833 76 (338) 113 (505) 154 (685) 194 (862) 165 (699) 209 (930)

Dimensional Stability %

D1204MD -3.60 /TD -2.42

MD -3.60 / TD -3.40

MD -4.30 / TD -1.80

MD -3.60 /TD -1.0

MD -4.40 /TD -1.80

MD -3.60 /TD -2.50

Low Temperature Flex D2136MD&TD: Pass

@ -40°C (-40°F)MD&TD: Pass

@ -40°C (-40°F)MD&TD: Pass

@ -65°C (-85°F)MD&TD: Pass

@ -65°C (-85°F)MD&TD: Pass

@ -65°C (-85°F)TBD

Accelerated UV Weathering % Retained Strength

G154 >90 >90 >90 >90 >90 >90

Limited Warranty (Exposed) Years

2 2 2 2 2 2

Limited Warranty (Buried) Years

5 5 10 10 10 10

*Without Anti-Slip Layer

800- IPG-8273 / 800-474-8273www.i tape.com | E-mai l : in fo@itape.com

©2014 Intertape Polymer Group® • AQUAMASTER BR • 1791-031714

TM

i build with

ASTM Standard

ArmorLiner 24Long Term

Liner

ArmorLiner 30Long Term

Liner

ArmorLiner 24LDouble Scrim

Laminate

ArmorLiner 40Double Scrim

Laminate

ArmorLiner 45Double Scrim

Laminate

ArmorLiner 30SFL Single Film Laminate

Base Fabric Black HDPE Black HDPE Black HDPE Black HDPE Black HDPE Black HDPE

Coating LDPE LDPE LDPE LDPE LDPE LDPE

Weight oz/sq yd (gsm)

D5261 11.5 (392) 15.6 (528) 12.0 (406) 18.5 (627) 22.5 (762) 14.7 (505)

Thickness mils (mm)

D177724 (0.60)+/- 10%

30 (0.75)+/- 10%

24 (0.60)+/- 10%

40 (1.0)+/- 10%

45 (1.12) 30 (0.75)**

Grab Tensile lb (N)

D7004MD 350 (1554) / TD 335 (1487)

MD 355 (1576) /TD 420 (1865)

MD 380 (1687) /TD 370 (1642)

MD 680 (3019) /TD 650 (2886)

MD 635 (2817) /TD 605 (2686)

MD 345 (1535) /TD 325 (1455)

Tongue Tear - Large Scale lb (N)

D5884MD 110 (488) / TD 110 (488)

MD 55 (244) /TD 55 (244)

MD 75 (333) /TD 70 (310)

MD 155 (688) /TD 155 (688)

MD 100 (444) /TD 100 (444)

MD 90 (400) /TD 90 (400)

Mullen Burst psi (kPa)

D751 645 (4444) 700 (4823) 750 (4892) 1250 (8612) 1250 (8612) 650 (4480)

Hydrostatic Resistance psi (kPa)

D751 425 (2927) 610 (4196) 226 (1558) 685 (4723) 880 (6063) 635 (4375)

Hydraulic Conductivity cm/s

Calc. MVTR E96

1.40 x 10-12 1.07 x 10-12 1.77 x 10-12 2.65 x 10-12 2.32 x 10-12 2.06 x 10-12

Puncture Resistance lb (N)

D4833 182 (811) 202 (900) 220 (970) 347 (1542) 380 (1688) 180 (800)

Dimensional Stability %

D1204MD -4.2 /TD -3.7

MD -2.8 /TD -1.5

MD -2.5 /TD -1.4

MD -3.8 /TD -1.8

MD -2.1 /TD -3.1

MD -2.9 /TD -1.0

Low Temperature Flex D2136MD&TD: Pass

@ -65°C (-85°F)MD&TD: Pass

@ -65°C (-85°F)MD&TD: Pass

@ -65°C (-85°F)MD&TD: Pass

@ -65°C (-85°F)MD&TD: Pass

@ -40°C (-40°F)MD&TD: Pass

@ -65°C (-85°F)

Accelerated UV Weathering % Retained Strength

G154 >90 >90 >90 >90 >90 >90

Limited Warranty (Exposed) Years

10 10 15 15 20 20

Limited Warranty (Buried) Years

20 20 25 25 25 25

**Including Film Laminate Layer

TM

i b

uild

wit

h

EUROPE

Langley, British Columbia

Ontario, CA

Tremonton, UT

Brighton, CO

Monterrey, Mexico

Menasha, WI

Carbondale, IL

Marysville, MI

Danville, VA

Columbia, SC

Tampa, FL

Executive HeadquartersSarasota, FL

Corporate HeadquartersSt. Laurent, Quebec

Truro, Nova Scotia

Flensburg, Germany

Porto, Portugal

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

1

2

34

5

6

7

8

9

10

1112

13

14

15

16

ManufacturingDistribution

CORPORATE PROFILEIntertape Polymer Group Inc. (IPG) is an acknowledged leader in the packaging industry. Leveraging its advanced manufacturing and technologies, extensive research and development capabilities and a comprehensive strategic acquisition program, the company believes it has assembled the broadest and deepest range of products in the industry. IPG is widely recognized for its development and manufacture of specialized polyolefin, plastic and paper-based packaging products, as well as complementary packaging systems for industrial and retail use. Additionally, IPG is a woven and flexible intermediate bulk container (FIBC) manufacturer. Its performance products, including tapes and cloths, are designed for demanding aerospace, automotive and industrial applications and are sold to a broad range of industry/specialty distributors, retail stores and large end-users in diverse industries.

CORPORATE VISIONIPG’s vision is to become an indispensable supplier to our customers, exceeding expectations in quality, delivery and cost through continuous improvement, innovation and customer interaction.

800- IPG-8273 / 800-474-8273www.itape.com | Tech Help: 877-447-4832 | info@itape.com