Specially Designed for

The course is designed for petrophysicists, petroleum engineers, drillers, geologist and reservoir engineers who are involved in planning and executing the drilling and completion of difficult wells either due to formation strength problems or to well geometry challenges in deviated and extended reach wells.

11th August 2014 - 15th August 2014, Jakarta, IndonesiaUnderstanding Geomechanics to minimize cost & optimize reservoir life cycle

Petrosync Distinguished Instructor

GeomechanicsGeomechanics

Includes Practical Exercises Case Studies and

Sharing!

Prof. Richard M. BatemanAssociate Professor, Texas Tech UniversityInternational Consultant Petrophysicist

Course Objectives

50 years of experience in Oil & Gas industry, including Halliburton, Amoco, SchlumbergerSpecializes in petrophysics and formation evaluationSPWLA Distinguished Speaker & Past Director and author of multiple patents & publications

PETROSYNCSynchronize Your Petroleum Skills

Understanding the basics of elastic formation properties

Computation of pore pressures, overburden stresses and limitations on hydraulic pressures forsuccessful drilling

Use of logging measurements to provide Youngs Modulus and Poissons Ratio and thus predictformation strength

Special core analysis methods appropriate for unconventional reservoir rock properties

Supported by

Geomechanics

11th - 15th AUGUST 2014, Jakarta, Indonesia

Course Overview

Geomechanics covers the basics of the deformation of materials under stress, strain and shear based on the theories of elasticity and failure. From this basis the course offers two paths. One covers the application of theory to practical drilling problems and the avoidance of hole collapse and/or formation breakdown while drilling.

The other covers the petrophysical measurements needed to predict formation stress magnitude anddirection, anisotropy and the preferred direction for extended reach laterals. Since many of the inputparameters can be derived from core analysis the course wraps up with a full day on modern special core analysis covering unconventional core samples.

Richard has a worldwide balanced experience with major oil company upstream operations (Amoco International - now BP), with large independents (Bridas / Pan American Energy and CGC) and with oil and gas industry Consulting, Research, and Service sectors (Schlumberger, Halliburton & Gaffney, Cline & Associates) and with Academia. Demonstrated professionalism in consulting, management, petroleum economics, teaching and executive energy roles. Career includes P&L responsibilities, optimization of producing property operations, reserve evaluations and certifications, people motivation, total quality management implementation and inter-company mergers. Skills include technology transfer and training at technical and managerial levels. Foreign language abilities accompany expat experiences in South America, Europe, Middle East, Africa and Pacific Rim.

He is an active member of SPWLA, SPE, and SCA; SPWLA Distinguished Speaker & Past Director, and author of numerous patents, technical & management publications and four books.

Instructor Profile

17th 21st Mar Special Core Analysis Jos Maas24th 27th Mar Integration of Petrophysics & Core Analysis Ahmed Taha5th 9th May Advanced Cased Hole Logging Interpretation & Application Mourad Wassef9th 13th June Advanced Logging Tool Physics Richard Bateman23rd 27th June11th 15th Aug Geomechanics Richard Bateman

Advanced Well Log Interpretation & Formation Evaluation Ahmed Taha

DATE COURSE TITLE INSTRUCTOR

For a copy of PetroSyncs Training Calendar for 2014, please visit: http://petrosync.com/PETROSYNC_-_Catalog_Training_Yearly_Version_-_2014_-_2.pdf

Petrophysics Training Courses (JANUARY - DECEMBER 2014)

22nd 25th Sep NMR Petrophysics Application Ayham Ash6th 9th Oct Petrophysics Operations Quality Control Ahmed Taha27th 31st Oct Petrophysics in Unconventional Reservoirs Mourad Wassef 24th 28th Nov Advanced Production Logging Mourad Wassef

Introduction to Mechanical Properties

Physics of materials Ductility & Brittleness Elastic constants and moduli: Poissons and Youngs Failure modes & their prediction Day Two - 12th August 2014Day Two - 12th August 2014 Drilling Applications

Triaxial stress Hydrostatic, Pore and Lithostatic Pressure Mohrs Circle and Wellbore stability

Day Three - 13th August 2014Day Three - 13th August 2014

Geomechanical Logging Measurements

Formation Density measurements Dipole Sonic measurements Use of Compressional, Shear and Stoneley waves Estimation of formation strength Regional stress direction and fracture orientation

Geomechanics

11th - 15th AUGUST 2014, Jakarta, Indonesia

Day Four - 14th August 2014Day Four - 14th August 2014

Formation Stress

Anisotropy Fracture monitoring Micro-seismic and Tiltmeters

Day Five - 15th August 2014Day Five - 15th August 2014

Special Core Analysis for

Mineralogy Porosity Permeability & nano-permeability Micro-CT scanning

Conclusion

SAVE COST IMPROVE PERFORMANCE REDUCE RISKPetroSync understands that in current economic climate, getting an excellent return on your training investment is critical for all our clients. This excellent training can be conducted exclusively for your organization. The training can be tailored to meet your specific needs at your preferred location and time. We will meet you anywhere around the globe. If you like to know more about this excellent program, please contact us on +65 6415 4502 or email general@petrosync.com

IN-HOUSE SOLUTIONS

Course Agenda

Day One - 11th August 2014Day One - 11th August 2014

08:00 09:00 Registration (Day1)09:00 11:00 Session I11:00 11:15 Refreshment & Networking Session I11:15 13:00 Session II13:00 14:00 14:00 15:30 Session III15:30 15:45 Refreshment & Networking Session II15:45 17:00 Session IV17:00 End of Day

PROGRAM SCHEDULE

Lunch

Materials to bringA scientific calculator together with a clear plastic ruler will be helpful in working exercises and reading charts. A tablet, smart phone or PC is permitted but not essential.

Group Discount is based on Standard Price

* For 7 or more delegates, please inquire for more attractive package.

* Important: Please note that registration without payment will incur a SGD 200 administration fee.

1st Delegate Name

Direct Line Number: Email:

Job Title: Department:

Head of Department:

Company:____________________________________________ Industry : __________________________________

Address: _______________________________________________________Postcode: _________________________

Country: ________________________Email: __________________________________________________________

Attention Invoice to: ______________________________________________________________________________

Direct Line Number: ______________________________ Fax: _____________________________________________

PAYMENT METHODS

DELEGATES DETAILS

Please note: - Indicate if you have already registered by Phone Fax Email Web

I agree to PetroSyncs terms & conditions,payment terms and cancellation policy.

By Direct Transfer : Please quote invoice number(s) on remittance advice PetroSync LLP Bank details: Account Name: PetroSync LLP Bank Number: 7144 Branch Code: 013 Account No: 13-1-005531-6

SWIFT Code of Correspondent Bank: SCBLSGSGXXX All bank charges to be borne by payer. Please ensure that PetroSync LLP receives the full invoiced amount.

By Credit Card : Please debit my credit card: Visa MasterCard

Card Number:

Name printed on card: _____________________________________________________________________

Expiry Date:

Name of Correspondent Bank : Standard Chartered Bank, 6 Battery Road, Singapore 049909

Security Code:

INVOICE DETAILS

Authorized Signature : ____________________________________________________________________________

Mrs Ms Dr Others Mr

DETAILS

PROGRAMME CONSULTANT

PAYMENT TERMS : Payment is due in full at the time of registration. Full payment is mandatory for event attendance.

2nd Delegate Name

Direct Line Number: Email:

Job Title: Department:

Head of Department:

Mrs Ms Dr Others Mr

3rd Delegate Name

Direct Line Number: Email:

Job Title: Department:

Head of Department:

Mrs Ms Dr Others Mr

INVESTMENT PACKAGES

AMEX

TERMS AND CONDITIONS

CHARGES & FEE(s)

- For Payment by Direct TelegraphicTransfer, client has to bear both local and oversea bank charges.

- For credit card payment, there is additional 4% credit card processsing fee.

DISCLAIMERPlease note that trainers and topics were confirmed at the time of publishing; however, PetroSync may necessitate substitutions, alterations or cancellations of the trainers or topics. As such, PetroSync reserves the right to change or cancel any part of its published programme due to unforeseen circumstances. Any substitutions or alterations will be updated on our web page as soon as possible.

DATA PROTECTIONThe information you provide will be safeguarded by PetroSync that may be used to keep you informed of relevant products and services. As an international group we may transfer your data on a global basis for the purpose indicated above. If you do not want us to share your information with other reputable companies, please tick this box

CANCELLATION POLICYYou may substitute delegates at any time as long as reasonable advance notice is given to PetroSync. For any cancellation received in writing not less than fourteen (14) working days prior to the training course, you will receive credit voucher less a SGD $200 administration fee and any related bank or credit card charges.

Delegates who cancel less than fourteen (14) working days of the training course, or who do not attend the course, are liable to pay the full course fee and no refunds will be granted.

In the event that PetroSync cancels or postpones an event for any reason and that the delegate is unable or unwilling to attend in on the rescheduled date, you will receive a credit voucher for 100% of the contract fee paid. You may use this credit voucher for another PetroSync to be mutually agreed with PetroSync, which must occur within a year from the date of postponement.

PetroSync is not responsible for any loss or damage as a result of the cancellation policy. PetroSync will assume no liability whatsoever in the event this event is cancelled, rescheduled or postponed due to any Act of God, fire, act of government or state, war, civil commotion, insurrection, embargo, industrial action, or any other reason beyond management control.

CERTIFICATE OF ATTENDANCEA minimum of 70% attendance is required prior issuance of PetroSync's Certificate.

* To enjoy the promotion & discount offer, payment must be made before deadline

* Prices include lunches, refreshments and materials. Promotion & discount cannot be combined with other promotional offers.

Please accept our apologies for mail or email that is incorrectly addressed. Please email us at registration@petrosync.com and inform us of any incorrect details. We will amend them accordingly.

- If you have not received an acknowledgement before the training, please call us to confirm your booking.

Course Confirmation

Investment Package

Standard Price 8th Aug 2014 SGD $ 5,995

Group Discount(3 or more Delegates)

10% discount for groups of 3 registering from the same organization at the same time

Early Bird Offer

Deadline Course Fee

8th Aug 2013

11th Jul 2014 SGD $ 5,795

Name : Email : registration@petrosync.comPhone : +65 6415 4500 Fax : +65 6826 4322

Cay Aagen

Geomechanics

11th - 15th AUGUST 2014, Jakarta, Indonesia