Product certificate

K20878/02

Issued 2015-06-15

Replaces K20878/01

Page 1 of 3

PVC fittings for solvent cement joints

STATEMENT BY KIWA

With this product certificate, issued in accordance with the Kiwa Regulations for Product

Certification, Kiwa declares that legitimate confidence exists that the products supplied by

Cepex S.a.u. as specified in this product certificate and marked with the Kiwa®-mark in the manner as

indicated in this product certificate may, on delivery, be relied upon to comply with Kiwa

evaluation guideline BRL-K17301 “Piping systems of PVC for the transport of drinking water and

raw water”.

Bouke Meekma

Kiwa

Publication of the certificate is allowed.

Advice: consult www.kiwa.nl in order to ensure that this certificate is still valid.

Supplier

Cepex

C/ Lluis Companys 5153

E08400 GRANOLLERS

Spain

Tel. 0034938704208

Fax. 0034938795711

Kiwa Nederland B.V.

Sir Winston Churchilllaan 273

Postbus 70

2280 AB RIJSWIJK

The Netherlands

Tel. +31 70 414 44 00

Fax +31 70 414 44 20

info@kiwa.nl

www.kiwa.nl

Certification process

consists of initial and

regular assessment of:

• quality system

• product

28

6/1

303

27

Kiwa®

Product certificate K20878/02 Page 2 of 3

PVC fittings for solvent cement joints

KIWA

PRODUCT SPECIFICATION

Fittings with adhesive connections of PVC-U according to evaluation guideline BRL-K17301 “Plastics piping systems of PVC for the transport of cold drinking water and raw water”.

The dimensions and types, in pressure class PN16, given in the table below are part of this product certificate.

Table 1

Nominal

Dimensions

(in mm)

Tee 45° Tee 90° Elbow 45 º Elbow 90 º

12

16

20 X X X

25 X X X

32 X X X

40 X X X

50 X X

63

75 X X X

90 X

Table 2

Nominal

Dimensions

(in mm)

Crosspieces Caps Sockets Reducers

12

16

20 X X

25 X X 25 x 20

32 X X 32 x 25

40 X X 40 x 32

50 X X 50 x 40

63 X X 63 x 50

75 X X 75 x 63

90 X X 90 x 75

MARKING

De fittings shall be marked with the Kiwa®-mark.

Fittings The minimum required marking on the fittings shall be:

or for smaller dimensions in agreement with Kiwa;

manufacturer name, trade name or logo;

material identification PVC;

nominal pressure (PN);

nominal dimension of the corresponding pipe;

production period or production code.

Location of the marks: on every fitting. The realization of the marks is as follows: clear, durable and indelible.

Kiwa®

Product certificate K20878/02 Page 3 of 3

PVC fittings for solvent cement joints

HYGIENIC ASPECTS

Approval:

This product is approved on the basis of the requirements set in the "Regeling materialen en chemicaliën drink- en warm

tapwatervoorziening" (“Materials and chemicals in the supply of drinking water and warm tap water Regulation”; published in the

Government Gazette).

Criteria hygienic aspects:

The hygienic aspects are based on two main criteria. The product shall permanently comply with:

• The product recipe approved during the assessment procedure. The recipe is laid down in the for confidentiality reasons

undisclosed ‘appendix hygienic aspects’ to certificate K20878. This recipe is not to be changed without prior approval by

Kiwa according to the Kiwa approval procedure for the hygienic aspects;

• Specific product requirements for the hygienic aspects, laid down in ‘appendix hygienic aspects’ to certificate K20878.

For confidentiality reasons this appendix is not public.

APPLICATION AND USE

The products are intended for PVC-U piping systems for the transport of drinking water and raw water heated to 45º degrees.

RECOMMENDATIONS FOR CUSTOMERS

Check at the time of delivery whether:

the supplier has delivered in accordance with the agreement;

the mark and the marking method are correct;

the products show no visible defects as a result of transport etc.

If you should reject a product on the basis of the above, please contact:

Cepex S.a.u.

and, if necessary,

Kiwa Nederland B.V.

Consult the supplier’s processing guidelines for the proper storage and transport methods.

Water Regulations Advisory Scheme Ltd.Unit 13,

Willow Road,Pen y Fan Industrial Estate,

Crumlin,Gwent,

NP11 4EG

Approval Number: 1509553Test Report: M106033

23rd October 2015

Cepex SAUAv. Ramon Ciurans 40,Pol. Ind. Congost, Parcela 6,08530 La Garriga (Barcelona),Spain

WATER REGULATIONS ADVISORY SCHEME LTD. (WRAS)MATERIAL APPROVAL

The material referred to in this letter is suitable for contact with wholesome water for domestic purposes having met therequirements of BS6920-1:2000 and/or 2014 ‘Suitability of non-metallic products for use in contact with water intended for humanconsumption with regard to their effect on the quality of the water’.

The reference relates solely to its effect on the quality of the water with which it may come into contact and does not signify theapproval of its mechanical or physical properties for any use.

POLYVINYLCHLORIDE (PVC, PVC-U AND CPVC) - COMPONENTS - ONLY LEAD FREE PVC-U LISTED IN THISSECTION.

5300

Cepex PVC-U Fittings (beginning with product code of 05). Grey coloured, injection moulded PVC-U fittings. For use with waterup to 23°C.

APPROVAL NUMBER: 1509553APPROVAL HOLDER: CEPEX SAU

The Scheme reserves the right to review approval.Approval 1509553 is valid between September 2015 and September 2020

An entry, as above, will accordingly be included in the Water Fittings Directory on-line under the section headed, “Materials whichhave passed full tests of effect on water quality”.

The Directory may be found at: www.wras.co.uk/directory

Yours faithfully

Jason FurnivalApprovals & Enquiries ManagerWater Regulations Advisory Scheme

The Water Regulations Advisory Scheme Ltd. Registered in England No, 06663930 Registered office: 6D Lowick Close, Hazel Grove, Stockport, SK7 5EDTel:+44(0)333 207 9030 Fax:+44(0)1495 248 540 Email:info@wras.co.uk website:www.wras.co.uk

WRAS MATERIAL APPROVAL - MATERIALS WHICH HAVE PASSED FULL TESTS OF EFFECT ON WATER QUALITY

The material referred to in this letter is suitable for contact with water for domestic purposes. Approval of this material does notsignify the approval of its mechanical or physical properties for any use.

Manufacturers or applicants may only quote in their sales literature terms which are used in this letter, namely that; ‘the materialas listed, having passed the tests of effect on water quality, is suitable for use in contact with wholesome water’

This may be abbreviated to ‘Water Regulations Advisory Scheme - Approved Material’ or ‘WRAS Approved Material’.

The scope of an Approval does not extend to rebranded materials unless otherwise agreed by the Scheme.

Use of the WRAS Approved Material Logo

Approval holders may use the WRAS Approved Material logo and make reference to any approval issued by WRAS Ltd. inrespect of a particular material or range of materials provided the approval is, and remains valid.

Approval holders are entitled to use the logo on the packing, promotional literature and point of sale advertising ApprovedMaterials.

Modifications to existing Approvals

It is a condition of WRAS Material Approval that NO changes or modifications to the Approved Material, be made without theApproval Holder first notifying WRAS Ltd. Full details of the proposed changes must be provided to the Scheme. Failure tocomply with this condition will immediately invalidate a previously granted Approval.

Re-Approval

WRAS will write to you 1 year before the approval expires asking whether you would like to renew it. Please complete therelevant section of the MA3 application form which will be included with the letter and return to WRAS (via e-mail or post).

Please note it is the responsibility of the Approval Holder to ensure the Approval remains valid. WRAS Ltd. accepts no liability forthe delay in granting approval where this is caused by circumstances outside of the Scheme’s control.

The Water Regulations Advisory Scheme Ltd. Registered in England No, 06663930 Registered office: 6D Lowick Close, Hazel Grove, Stockport, SK7 5EDTel:+44(0)333 207 9030 Fax:+44(0)1495 248 540 Email:info@wras.co.uk website:www.wras.co.uk