General Purpose Instruments - ES Instrumentación

GeneralPurpose

Instruments

www.gsi-protek.com 15

Oscilloscope

8000 Series

Digital Mixed Signal Oscilloscope

Features

The New Protek 8000 Series consist of two types of Line-up.

The first line-up is recommended for efficient and practical use. It offers clean & fast signal analysis, 8-inch High

Define resolution display, high memory of 28Mpts for every channel, basic serial BUS decoding and 16-Channel

digital signal analysis and arbitrary function generator. It is a reasonable products that can be effectively used in

various measurement environments.

Description Protek 8102 Protek 8104

Frequency Band width 100MHz

Analog Channel 2CH 4CH

Digital Channel 16Ch Digital Logid Analysis(Option)

Real-Time Sampling 1GSa/s

Memory Depth 28Mpts

Display 8 inch High Define Resolution TFT LCD

Digital Arbitrary Function Generator Built-in 25MHz Function Generator(Option)

Specifications

16 www.gsi-protek.com

Oscilloscope

8000 Series

Digital Mixed Signal Oscilloscope

Features

The Second model in the dual line-up of Protek 8000 Series, it is a high-performance, high-end Oscilloscope.

It is unique mixed signal oscilloscope with a frequency bandwidth up to 500MHz, high sampling rate of 4GSa/

s and a large memory of 280Mpts. With a fast waveform capture rate of 200,000wfm/s, it provides stable signal

acquisition with fast and excellent display for complete signal analysis.

In addition to analog signal test and data analysis functions, serial BUS trigger and decoding, logic circuit

testing, and waveform recording and playback analysis with Super Fine Recorder make it deal for highly accurate

embedded design and application development measurement environments.

Description Protek 8204 Protek 8354 Protek 8504

Frequency Band width 200 MHz 350 MHz 500 MHz

Analog Channel 4 Ch

Digital Channel 16 Channel(Option)

Waveform Sensitivity level 256 Level

Real-Time Sampling 4 GSa/s

Memory Depth 280 Mpts

Display 9 inch High Define Resolution TFT LCD

Specification


Oscilloscope

Description Specifications

Protek 8102 Protek 8104 Protek 8204 Protek 8354 Protek 8504

Freq Band width 100MHz 100MHz 200MHz 350MHz 500MHz

Channel 2Ch + EXT 4Ch + EXT

Real-Time Sampling 1GSa/s 4GSa/s

Waveform Capture Rage

50,000 wfms/s 200,000 wfms/s

Input Impedance (1MΩ±2%) // (20pF±3pF) (1MΩ ±1%) ||（15pF ±3pF, 50Ω : 50Ω±1.5%

Memory Depth 28Mpts 280Mpts

Rise Time ≤3.5 ns ≤1.8 ns ≤1.0 ns ≤700ps

Time base range 5ns/div ~ 50s/div 2ns/div ~ 1,000s/div 1ns/div ~ 1,000s/div

DC Accuracy ± 3 % of Full Scale ± 2 % of Full Scale

Max Waveform Storage

65,000 waveforms 200,000 waveforms

Voltage base Range 1 mV/div ~ 20V/div (1MΩ) 1 mV/div ~ 5V/div (1MΩ) ±40V1 mV/div ~ 1V/div (50Ω) ±12V

Vertical resolution 8 bit

Trigger Mode

Edge, Pulse Width, Alternate, Runt, Nth

Edge, Delay, Duration, Setup/Hold, Slope,

Vedio, Pattern, RS232/UART, I2C, SPI

Edge, Pulse Width, Alternate, Runt, Nth Edge, Delay, Duration,

Setup/Hold, Slope, Vedio, Pattern, RS232/UART、I2CSPI、CAN，

USB、FlexRay

BUS Decoding(Option)

Standard Parallel decoding ; RS232/UART,

I2C, SPI

Standard Parallel decoding ; RS232/UART、I2C、SPI、CAN、USB、

FlexRay

Math function A+B, A-B, A×B, A/B, FFT, Logic Operation(√), Editable Advanced

Data Storage 256 Data(Waveform & Set value) 20 Data(Waveform & Set value)

Direct Help Function Yes Yes

Max Input Voltage CAT I 300Vrms, CAT II 100Vrms, Transient overvoltage 1000Vpk

Automatic Measurement

Max, Min, Peak-Peak, Top, Bottom, Amplitude, Cycle Mean, Mean, Middle,

Cycle RMS, RMS, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay

A→B, Delay A→B, Phase A→B, Phase B→A, Area, Cycle Area

Max, Min, Top, Bottom, Middle, PK-PK, Amplitude, Average, RMS, Cycle Average, Cycle RMS, Area, Cycle Area, Frequency, Period, Rising, Falling, +Width,

-Width, BrstW, Overshoot, Preshoot, +Duty, -Duty, RiseDelay, FallDelay, Phase

Others16Ch Digital logic analyzer, 25MHz arbitrary

function generator, LXI(Lan) interface module(Option)

USB to GPIB Convertor & LA module(Option)

Storage Type Setting ,Waveforms,BMP, Recording and PC Remote Program Data Acuisition

InterfaceUSB Host&Device, Pass/Fail, Trigger-Out,

AUX OutUSB Host&Device, LAN, Pass/Fail, Trigger-Out,

AUX, VGA out, Clock In/Output port(10MHz)

Display 8” TFT Display (800x480) 24bit 9” TFT Display (800x480) 24bit

Dimensions & Weight

336mm(W) x 164mm(H) x 108mm(D)/ ±3.5kg

456mm(W) x 210mm(H) x 120mm(D)/ ±4.5kg

Operating Condition Temperature 0 ~ 40 / Humidity : < 70%RH

Standard products Probe Kit Set, Power Cable, Manual

Input Power 100V～240VACrms，50Hz/60Hz

Specifications


Oscilloscope

Protek 8000 Series Digital Mixed Signal Oscilloscope

High Memory, Max 280Mpts Max 200,000 Frame Waveform Recording

Various decoding functions, RS232/UART, I2C, SPI, CAN, USB, Flex Ray

Measurement Application


Oscilloscope

5000E Series

Digital Storage Oscilloscope

Features

- 60MHz, 100MHz, 200MHz

- 1GSa/s Real-Time Sampling

- 32Mpts Memory Depth

- 150,000wfm/s Waveform Capture Rate

- 7" High-Define Resolution TFT LCD Display

- Interface : LAN(LXI), USB, RS-232C, P/F etc

- 16CH 250MSa/s Logic Analyzer

DEEP MEMORY (ZOOM) SAMPLING MODE TRIGGER MODE

Specification

The New Protek 5000E Series greatly improved the performance more than previous products and added

convenience to make it convenient for th user.

It is equipped with powerful 32Mpts memory compared to the same spec's other oscilloscope that goes beyond

simple commercialization improvement. And it has a fast waveform capture rate of 150,000wfms/s and is a

competitive products that can be used in a wide range application, from the educational institutions to industries,

personal DIY, and hobbies.


Oscilloscope

SpecificationsModel Protek 5062E Protek 5102E Protek 5202E

Frequency Band width 60 MHz 100 MHz 200 MHz

Channel 2CH + EXT

Real Time Sampling 1 GS/s

Rise Time ≤5.8 ns ≤3.5 ns ≤1.8 ns

Memory Depth 32 Mpts 16 Mpts

Waveform Capture Rate ≥150,000 wfms/s

Vertical Resolution 8 bits

Vertical Sensitivity (V/div) 2mV/div~10V/div (1, 2, 5 step) 2mV/div~5V/div

Time Range (s/ div) 2ns/div~50s/div (1, 2, 5 step)

Data Storage Type Setup, Wave, Bitmap, CSV, REF

Trigger Mode Edge, Pulse, Runt, Video, Slope, Alternate

Trigger Level Range Internal : Center of the Screen±div / EXT : ±1.2V /EXT/5 ±6V

Suppression Range 100ns~1.5s

Edge Trigger Edge Mode Rising, Falling, Rising &Falling

Pulse Trigger

Trigger ModePositive pulse width(greater than, less than or equal to);Negative pulse width(greater than, less than or equal to)

Pulse Width

Range20ns~10s

Video TriggerSignal Mode

& Line/FieldTV Trigger NTSC, PAL & SECAM signal mode,

lines range is 1-525(NTSC) and 1-625(PAL/SECAM)

Slope TriggerTrigger Mode

Positive slope(greater than, less than or equal to);Negative slope(greater than, less than or equal to)

Time Setting 20ns~10s

Cursor Manual / Tracking / Auto Mode

Auto MeasurementVpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Frequency, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty,

Delay 1->2, Delay 2->1, Phase 1->2, Phase2 ->1

Math Function +, -, x, / , FFT, Digital Filter

Waveform Storage Internal Storage :10 groups of waveforms, 10 kinds of set value

FFTWindow Hanning、Hamming、Blackman、Rectangular

Sample Point 1024 points

Lissajous Figures

Phase Difference

±3 degrees

InterfaceStandard : USB Host, USB Device, Pass/Fail

Option : LAN(LXI) Module, 16CH Logic Analyzer Module

Input Power 100～240VACrms，50Hz/60Hz , 40VA Power Consumption

Display 7" TFT LCD, 64k color WVGA(800×480)

Operating Condition Temperature : 0~ 40, Humidity : 35 ≤80RH, +35~+40 ≤60% RH

Standard Products Probe kit 1set, CD, Power Cable

Dimensions & Weight 332mm×147mm×170mm / 2.9 kg


Oscilloscope

6500A SeriesAnalog Oscilloscope

Features

- 20 MHz or 100MHz Band width

- 1 mV Sensitivity

- 1.9, or 12kV CRT

- Auto focus

- Trigger lock

- 4 trace, 2 Channels

DescriptionSpecifications

6510A 6502AVertical Delection

Frequency Band width DC: 0~100MHz / AC : 10Hz ~100MHz (-3dB) DC: 0~20MHz / AC : 10Hz ~20MHz (-3dB)

Operation Mode CH A, CH B, DUAL, ADD

Vertical Rage 1 mV/DIV~1 V/DIV(10MHz, -3dB), x5 gain selected, 5 mV/DIV~ 5 V/DIV

Input Impedance 1 MΩ ±2%, 25 pF ±3 pF

Rise Time 3.5 nS 17.5 nS

Max Input Voltage 300 V (DC+AC peak) AC freq<1kHz

Horizontal Deflection

Operation Mode Main, Mix, Delay, Hold off Time (5:1 Variable)

X-Y Mode Switch Selectable Using X-Y Switch; CH1= X axis ±3%; CH2= Y axis ±6%

Sensitivity & Accuracy X axis ±6%; Y axis ±3%, X-Y Phase Difference: <3º(50kHz)

Sweep time & Accuracy 0.1 µS/DIV~ 0.2 S/DIV in 1-2-5 Sequence, 20 Step ; Accuracy ±3%

Sweep rate X10, ±10%, Extend Sweep Speed up to 2nS/DIV

Trigger System

Trriger Mode AUTO, NORM TV-V, TV-H,

Trigger Source INT,CH2,Line, EXT

Trigger Coupling AC Coupling

Trigger Sensitivty Int: 2 division( 2division with TV Coupling), Ext: 0.3V / (1Vpp)

Slope AC Coupling

General

CRT 12kV, 5”inch Diagonal, 8x10DIV (1DIV=1cm), P31 phosphor

Calibration Voltage Square Wave About 1kHz, 2Vp-p ±3%,

Input Voltage 220V ±10%, 50/60 Hz Approximately 35 W

Probe 1 X, 10 X

Operating condition Temperature : 0 ~ 40 / Humidity : < 70%RH

Standard Products Probe kit 1set, Manual, Power Cable

Dimension & Weight 322(W) X 132(H) X 376(D) mm , About 8.4kg 322(W) X 132(H) X 376(D) mm , About 7.4kg

Specifications


Function Generator

9205CSweep Function Generator

Features

- Digital Typical display & Count

- linear /log sweep Function

- Protection Function of all (수정필)

- External FM and VCF Input

- Practical Design of easy button arrangement

- Output Voltage LED display, TTL / CMOS output

- Frequency modulation for accurate measurement

- Panel display wtih switch operation for convenience

- 50Hz Sine wave output(convenient for education)

- Power output function (Option)

Model Protek 9205C

Frequency Range 0..2 Hz ～ 2 MHz

In/Output Wave Port 1 Waveform Output , 1 TTL , 1 External port, 1 50Hz hold output

Output Waveform Sine , square, triangle, pulse, ramp, 50Hz sine wave

Square Wave Rise Time 80ns

Output Voltage Amplitude ≥20Vp-p（1MΩ） ≥10Vp-p（50Ω）

DC Offset Range ±10V（1MΩ） ±5V（50Ω）

Output Impedance 50Ω

Duty ratio Control 20%～80%

Display Range 6digits max 999999

Voltage Amplitude 3digits,resolution:1mVp-p

TTL Output Amplitude “0”：≤0.6V；“1”：≥2.8V

TTL Output Impedance 600Ω

Output Frequency Accuracy 6digits ±1% ±1word

External Frequency Range 1Hz～10MHz

Amplitude error Range ±15%±1word

Display Dual LED Display (Frequency, Voltage)

Input Power AC 220V±10%；50Hz±5%

Dimensions & Weight 225W×105H×285D(mm)；weight：about 3kg

Operating Condition Temperature : 0 ~ 40 / Humidity : < 70%RH

Standard products BNC Cable, Manual, Power Cable

Power output (10W Power Amplifier, Factory Option)

Output Voltage 35Vp-p

Output Power ≥10W

DC Level Offset Range ＋15V～－15V

Protek 9205C

Output Frequency Range 0～ 2 MHz

Output Waveform Sine, Pulse, Trangle, Ramp, etc

Waveform Output Port Single Channel (TTL, CMOS, etc)

Display 5Digit + 3Digit Dual Display

Specifications


FunctionGenerator

DDS Arbitrary Function Generator

GD-2000N Series

Features

DescriptionSpecification

Protek GD-2082N Protek GD-2122N Protek GD-2162N

Max Output Frequency 80MHz 120MHz 160MHz

Max SAmpling 500MSa/s

Channel Dual Output Channel

Waveform Storage Max 32Mpts

Vertical Resolution 16 bit

Display 8 inch Wide TFT Display

Specification

The New Protek GD-2000N Series is a multifunctional signal generator that combines functions such as function generator, arbitrary waveform generator, pulse generator, harmonic generator, analog / digital modulator, and frequency counter.

It is convenient and easy to generate a clear signal with accurate signal output, also offers a complete dual output, fast sampling rate of 500MSa/s, arbitrary waveform of 32Mpts, and 8 inch large-sized display for easy interface and application developers.


Function Generator

SpecificationModel GD-2082N GD-2122N GD-2162N

Output Ports 2 Ports (Dual)

Max Output Frequency Range 80MHz 120MHz 160MHz

Real-time Sampling 500MS/s

Output Waveform Sine, Square, Ramp, Harmonic, Pulse,Noise,DC, Arbitrary Waveforms

Operating Mode Output Gate, Continuous, Modulate, Frequency Sweep, Burst

Modulation Type AM,FM,PM, ASK,FSK,PSK,PWM,QAM,BPSK,QPSK,OSK,SUM

Output Waveform Frequency Characteristics

Sine 1µHz～80MHz 1µHz～120MHz 1µHz～160MHz

Square 1µHz～30MHz 1µHz～40MHz 1µHz～50MHz

Pulse 1µHz～30MHz 1µHz～40MHz 1µHz～50MHz

Ramp 1µHz～2MHz 1µHz～3MHz 1µHz～4MHz

Harmonic 1µHz～40MHz 1µHz～50MHz 1µHz～80MHz

Noise(-3dB) 80MHz Bandwidth 120MHz Bandwidth 160MHz Bandwidth

Resolution 1µHz

Arbitrary Wave

Waveform Length Max 32Mpts

Vertical Resolution 16bits(symbols included)

Sampling 500MS/s

Minimum Fall/Rise Time 5ns~, Typical

Jitter(RMS)(typical) 6ns+30ppm

Non-Volatile Memory 8 waveforms (7GB)

Output Characteristics

Amplitude Range (50Ω) ≤ 20MHz : 1mVpp～10Vpp；≤ 100MHz : 1mVpp～5Vpp；≤ 120MHz : 1mVpp～2.5Vpp；≤ 160MHz : 1mVpp～1Vpp；

Accuracy (1kHz sine) ±(1% of setting value+1mVpp)

Amplitude Flatness ( 1kHz sine wave, 5Vpp)

≤ 10MHz : ±0.1dB；≤ 100MHz : ±0.2dB；≤ 120MHz : ±0.4dB； ≤ 160MHz : ±0.8dB

DC Offset Characteristics

Range (Peak AC+DC) ±5V(50Ω)；±10V (High resistance)

Offset Accuracy ±(2% of Offset setting+ 0.5% of amplitude +2mV)

Waveform Output

Impedance 50Ω, typical

Isolation 42Vpk maximum to earth

Protection Short-circuited protection, waveform output disabled automatically when overloaded.

Modulation Input

External AM Modulation ±5Vpk full-scale；5kΩ input impedance

In/Output Frequency Range 10MHz±500Hz

In/Output Level Range 80mVpp～10Vpp/0dB, (typical)

In/Output Impedance 2kΩ/50Ω, typical, AC coupled

Lock Time ＜1s

External Trigger TTL Compatible

Trigger Input

Input Level TTL Compatible

Slope Rise or Fall, selectable

Pulse Width ＞50ns

Input Impedance ＞10kΩ，DC-coupled

Linear Sweep ＜100ns, Typical

Burst Delay ＜300ns, Typical


FunctionGenerator

Trigger Output

Output Level TTL Compatible, to 50Ω

Pulse width ＞60ns, Typical

Output Impedance 50Ω, Typical

Max Frequency 1MHz

Sync Output

Input Level TTL Compatible

Input Impedance 50Ω

Frequency Counter

Range TTL Compatible (200mVpp ~ 9Vpp)

Intput Frequency 100mHz～800MHz

Accuracy ±51ppm

Frequency Resolution 7 bit/s

Trigger Adjustment Sensitivity 0~ 100%

Coupling Mode AC,DC

General Characteristics

Power 100～240 VAC, 50Hz/60Hz

Display 8 Inches, TFT LCD, WVGA(800 × 480)

Interface USB, LAN Interface & external Input


Dimension & Weight 336mm × 163.8mm × 105mm / ± 3.5kg

Standard Products BNC Cable, Manual, Power Cable

Optional Accssories Digital Interface

Specifications

16bit high resolution output frequency control

Application

Digital Signal Output (UART)

The New GD-2000N is an innovative digital technology that is optimized for digital signal development environment by designing protocol signals such as I2C, SPI and RS232. It also upgrades to 16 bit frequency resolution, which helps to realize more accurate and complete signal.

Aribtrary Waveform Output

Various modulation output ; QAM, BPSK, QPSK, OSK and SUM etc.


Function Generator

DDS Arbitrary Function Generator

GD-1000N Series

Features

- DDS Digital synthesis technology

- 3.5" TFT Color LCD Display

- 200MSa/s Max Sampling Rates, 14bit Resolution

- Sine, Pulse, Square, Ramp, Noise, Arb in 33kinds of waveforms

- Modulations ( AM, FM, ASK, FSK, PSK, Sweep, Burst )

- Dual Output Ports

- Plug & Play USB Device, RS-232 Interface(Option)


Protek GD-1005N Protek GD-1012N Protek GD-1022N Protek GD-1042N

Max Output Frequency

5MHz 10MHz 20MHz 40MHz

Max Sampling 100MSa/s 200MSa/s

Output Ports Dual Channel

Waveforms Length 16kpts

Vertical Resolution 12 bit 14 bit

Specifications


FunctionGenerator

Specifications


Protek GD-1005N Protek GD-1012N Protek GD-1022N Protek GD-1042N

Max OutputFrequency

Sine Wave：1µHz～ 5MHz

Square Wave：1µHz～ 5MHz

Ramp Wave :1mHz～ 1MHz

Pulse Wave：1µHz～ 3MHz

Arbitrary Wave：1mHz～ 1MHz













Ramp Wave1mHz～ 1MHz



Max Sampling 100MSa/s 200MSa/s

Waveform Length 16kpts

Output Ports Dual Channels

Vertical Resolution 12bit 14bit

General Characteristics

Sine WaveTotal HarmonicDistortion(≤1Vpp)

DC ～ 100kHz ：-60dBc / 100kHz ～ 1MHz：-50dBc1MHz ～ 10MHz：-35dBcDC～ 1MHz ：-50dBc (Non Harmonic Distortion)

Square Wave Rise : ≤20ns / Overshoot : ≤10% / Duty : 0~99%

Ramp WaveLine : ≤0.1% of peak ;（typical value 1kHz，1VPP，symmetry 100%)Symmetry : 0%～100%

Pulse Wave Overshoot : ≤10% / Pulse string Cycle 1～50000CYC / Initial phase : 0~360°

Modulation AM, FM, ASK, FSK, PSK, Sweep, Burst Support

Amplitude Output

50Ω 2mVpp~10Vpp(1µHz~20MHz) 2mVpp~5Vpp(20MHz~40MHz)

Open Circuit(High Impedance)

4mVpp～20Vpp(1µHz~20MHz)4mVpp～10Vpp(20MHz~40MHz)

Accuracy ±1%+2mVrms；(High Impedance，RMS，Frequency 1kHz）

DC OffsetRange : ±10V(high impedance）Resolution : 20mVAccuracy : ±（1%+20mV)

Sync Output Output Sync : 5V / Frequency : 1µHz～2MHz

SweepLinear or Logarithmic / Range : Set starting and end point arbitraryTime interval : 50ns ～ 60s


Interface USB & RS232C (Factory Option)

Display 3.5” TFT LCD Display

Standard Product BNC Cable, Manual, Power Cable

Dimensions 3.5”TFT color LCD / 235mm(W)×123mm(H)×300mm(D) / Weight : 3kg


Frequency Counter

Frequency Counter

U3003A

Features

- Microprocessor to realize intelligent measurement

- Low pass filter and attenuator in pre-position circuit

- Count backwoards, realize the equivalent accuracy

- Measurement with fast speed and high sensitivity

- Micro SCM to measure frequency period and intelligent the management

- LSI design and CPLD application to diminish the components qty

- And the average working time be not less than 10000h without fault

- Fine outline, Small, light, easy to handle

Specification

Frequency Measurement Range 1Hz～3GHz

Period Measurement Range 10ns～1s

Capacitance Counter 10^8 －1

Specifications

Protek U3003A Frequency Counter realizes intelligent measurement using microprocessor technology, Mutual

counter technology, high measurement accuracy, wide frequency measurement range (1Hz ~ 3000MHz), high

sensitivity gate time measurement is possible. Further, the loss-pss filter and attenuators on the front circuit of

this counter are suitable for communication research and development.


FrequencyCounter

Description Protek U3003A

Frequency Measurement 1Hz～3GHz

Cycle Measurement 10ns-1s

Count Capability 108-1 (역시 8제곱 필요)

Input ImpedanceChannel A 1MΩ//40pF Channel B 50Ω

Input Coupling mode AC

Waveform Adaptability Sine, triangle, pulse

Dynamic Input Voltage

Channel A 30mVrms～250Vp～p

Channel B 30mVrms～1Vrms

Frequency Measurement

Channel A 1Hz～10MHz/100MHz

Channel B 100MHz～1.5GHz/3GHz

Channel A low pass filter －3dB bandwidth is about 100kHz

Channel A attenuation ×1 or ×20

Measurement Error± time base error ± trigger error ±LSDLSD＝ 100ns/(Strobe time) ×measured frequency（or measured period）

Trigger ErrorWhen the measured signal noise is 40dB，trigger error ≤0.3%

Strobe time 10ms、100ms、1s、10s

Count capability 0～99,999,999

Crystal vibrator freq 10MHz

Freq stability of Crystal vibrator

1×10-5/d

External Input Frequency 10MHz

Ext Freq Input Amplitutde ＞1Vp-p

Display8 digits high bright, 0.5 inch numeral tube,3 units LED indicator, a strobe LED indicator and a ext freq mark LED indicator;

Power Supply AC 220V(1±10%), 50Hz((1±5%), 20VA

Mechanic Character

Standard Products Manual, Power Cable, RF Cable(Option)

Operating Conditions 0~ 40°C ≤40% ~ 80%

Dimension 90H×280W×240D（mm）

Weight ±1.5kg

Specifications


Power Supply

DC Power Supply

Features

- SMD Adhesive Sheet Element Technology

- Back Light Dual LCD Display (Dual Mode)

- Automatic Conversion of Stable Voltage & Current

- Terminal Expansion Output (Serial EXT Output)

- Progressive Current Adjustment

- Multi-loop High Precision Voltage Adjustment

- Economical cost, Single/Dual output & Fixed(5V,3A)Output Type Model

PL-3000 S.D.T Series


PL-3003S PL-3005S PL-5003S PL-3003D PL-3005D PL-3003T PL-3005T

Watt 90W 150W 90W 150W 90W 150W

Voltage 0~30V 0~50V 0~30V 0~30V

Current 0~3A 0~5A 0~3A 0~3A 0~5A 0~3A 0~5A

Port Type Single Type Dual Type Dual + Fixed(5V, 3A)

Specifications


Power Supply

DC Power Supply

3003/3005 S.D.T


PL-3003S PL-3005S PL-5003S PL-3003D PL-3005D PL-3003T PL-3005T

Output Watt 90W 150W 90W 150W 90W 150W

Output Voltage 0~30V 0~50V 0~30V 0~30V

Output Current 0~3A 0~5A 0~3A 0~3A 0~5A 0~3A 0~5A

Accuracy Voltage: 100 / Current : 10 ( 3 Digit display ) Accuracy±0.05%~

Port Type Single Type Dual Type Dual + Fixed(5V, 3A)

CurrentStepwise

30mA±3mA50mA±5mA

30mA±3mA

Line Regulation

CV ≤5x10-4mV / CC ≤5x10-4mV / CV ≤5x10-4mA / CC ≤5x10-4mA

Load Regulation

CV ≤5x10-4mV / CC ≤5x10-4mV / CV ≤5x10-4mA / CC ≤5x10-4mA

Ripple &Noise

CV ≤0.5mV / CV ≤2mV / 0.1% + 10mA

Standard Products

Manual, Output Cable 1 Set, Power Cable

Operating Condition

0~ 40°C ≤40% ~ 90%

Display Type Back light 3Digit LCD Back light Dual 3Digit LCD

Power Source AC 100 or 220V(1±10%), 50Hz((1±5%), 20VA ( Adjustable by Toggle Button)

Dimensions 130 x 190 x 270mm 270 x 180 x 310mm

Weight 4.8kg 5.6kg 11kg 13kg 11.5kg 13.5kg

Specifications


Power Supply

Programmable DC Power Supply

Features

- 52 models: 6V~600V/1A~400A are available for selection.

- 5 or 4 digits of current and voltage meter.

- Max. Output Current up to 2000A (5 units in parallel).

- Switching mode, High density, and convenience for installation to 19" rack.

- Setting/ Measurement : 16bit D/A, 24bit A/D

- 750W in 1U half width, 1.5kW in 1U/2UH, 3kW in 2U height.

- Complete Protection : OVP, OCP, OTP

- Standard LXI, Isolation RS-485 Interface, (GPIB Interface is Option).

- PR/PD Series can store 16 sets of memories ; Memories can be recalled manually in front panel or by external

- CE, LXI approved

PR/PD Series

Specifications Specifications

All parameters are specified base on power on after 30 minutes, Ambient temperature 23±5 / Humidity : Under 80% RH, AC Voltage : ±5%, Frequency : ±5%.

Ripple Bandwidth=5 ~ 1MHz

The minimum output is 2V when measuring the ripple of 6V~20V models. The minimum output is 10% of the rated voltage/current when measuring other models.

Output transient response time: resistor load testing within rated output voltage.

Special requests on demand.

All specifications are subject to change without notice.


Power Supply

Output

Model

Ripple Line Regulation Load Regulation Response Time(S)RemoteSense

(V)SizeCC CC CV CC CV CC CV CC Full

LoadUP

FullLoadDown

No LoadDownV A

mVrms

mArms

0.05%+mV

0.10%+mA

0.05%+mV

0.10%+mA

0 - 6 0 - 100 PR/PD-6100 10 180 2.8 11 2.8 23 0.08 0.05 0.6 1

1UH

0 - 8 0 - 90 PR/PD-8090 10 180 2.8 11 2.8 23 0.08 0.05 0.6 1

0 - 12.5 0 - 60 PR/PD-1260 10 120 4 8.5 4 18 0.08 0.05 0.8 1

0 - 20 0 - 38 PR/PD-2038 10 76 4 5.8 4 12.6 0.08 0.05 0.8 1

0 - 30 0 - 25 PR/PD-3025 10 63 5 4.5 5 10 0.08 0.08 0.9 1.5

0 - 40 0 - 19 PR/PD-4019 10 48 6 3.9 6 8.8 0.08 0.08 1 2

0 - 50 0 - 15 PR/PD-5015 10 43 8 3.6 8 8.2 0.08 0.08 1.1 2

0 - 60 0 - 12.5 PR/PD-6012 10 38 8 3.25 8 7.5 0.08 0.08 1.1 3

0 - 80 0 - 9.5 PR/PD-809 10 29 10 2.95 10 6.9 0.15 0.15 1.2 4

0 - 100 0 - 7.5 PR/PD-1007 10 23 12 2.75 12 6.5 0.15 0.15 1.5 5

0 - 150 0 - 5 PR/PD-1505 16 18 17 2.5 17 6 0.15 0.15 2 5

0 - 300 0 - 2.5 PR/PD-3002 25 13 32 2.25 32 5.5 0.15 0.15 3 5

0 - 350 0 - 2.1 PR/PD-3502 25 13 32 2.25 32 5.5 0.15 0.15 3 5

0 - 450 0 - 1.7 PR/PD-4501 34 13 35 2.3 35 5.5 0.21 0.24 3.5 5

0 - 600 0 - 1.25 PR/PD-6001 75 8 62 2.13 62 5.26 0.25 0.3 4 5

0 - 6 0 - 200 PR/PD-6200 15 360 2.8 18.5 2.8 38 0.08 0.05 0.6 1

1U

0 - 8 0 - 180 PR/PD-8180 15 360 2.8 18.5 2.8 38 0.08 0.05 0.6 1

0 - 12.5 0 - 120 PR/PD-12120 15 248 3.4 14.5 4 28 0.08 0.05 0.8 1

0 - 20 0 - 76 PR/PD-2076 15 152 4 9.6 4 20.2 0.08 0.05 0.8 1

0 - 30 0 - 50 PR/PD-3050 15 125 5 7 5 15 0.08 0.08 0.9 1.5

0 - 40 0 - 38 PR/PD-4038 15 95 6 5.8 6 12.6 0.08 0.08 1 2

0 - 50 0 - 30 PR/PD-5030 15 85 7 5.2 7 11.4 0.08 0.08 1.1 2

0 - 60 0 - 25 PR/PD-6025 15 75 8 4.5 8 10 0.08 0.08 1.1 3

0 - 80 0 - 19 PR/PD-8019 15 57 10 3.9 10 8.8 0.15 0.15 1.2 4

0 - 100 0 - 15 PR/PD-10015 15 45 12 3.5 12 8 0.15 0.15 1.5 5

0 - 150 0 - 10 PR/PD-15010 24 45 12 3.5 12 8 0.15 0.15 2 5

0 - 300 0 - 5 PR/PD-3005 38 25 32 2.5 32 6 0.15 0.15 3 5

0 - 350 0 - 4.2 PR/PD-3504 38 25 32 2.5 32 6 0.15 0.15 3 5

0 - 450 0 - 3.4 PR/PD-4503 68 18 35 2.5 32 5.8 0.21 0.24 3.5 5

0 - 600 0 - 2.5 PR/PD-6002 113 15 62 2.26 62 5.5 0.25 0.3 4 5

0 - 6 0 - 400 PR/PD-6400 23 1000 2.8 42 6.2 85 0.08 0.02 0.5 1

2U

0 - 8 0 - 360 PR/PD-8360 23 1000 2.8 42 6.2 85 0.08 0.02 0.5 1

0 - 12.5 0 - 240 PR/PD-12240 23 800 3.2 29 7.1 60 0.08 0.1 0.8 1

0 - 20 0 - 152 PR/PD-20150 23 600 4 18.5 8 38 0.08 0.1 0.8 1

0 - 30 0 - 100 PR/PD-30100 23 310 5 13 9.5 27 0.08 0.16 0.9 1.5

0 - 40 0 - 76 PR/PD-40076 23 250 6 10.5 11 22 0.08 0.16 1 2

0 - 50 0 - 60 PR/PD-5060 23 200 7 9 13 19 0.08 0.16 1.1 2

0 - 60 0 - 50 PR/PD-6050 23 150 8 7.5 14 16 0.08 0.16 1.1 3

0 - 80 0 - 38 PR/PD-8038 23 110 10 6.2 17 13.4 0.15 0.3 1.2 4

0 - 100 0 - 30 PR/PD-10030 23 90 12 5.3 20 11.6 0.15 0.3 1.5 5

0 - 150 0 - 20 PR/PD-15020 36 90 17 4.2 27.5 9.4 0.15 0.3 2 5

0 - 300 0 - 10 PR/PD-30010 57 50 32 3.1 50 7.2 0.15 0.3 3.5 5

0 - 350 0 - 8.4 PR/PD-3508 57 50 32 3.1 50 7.2 0.15 0.3 3.5 5

0 - 450 0 - 6.8 PR/PD-4506 134 42 43 2.8 84 6.7 0.25 0.5 4 5

0 - 600 0 - 5 PR/PD-6005 170 30 62 2.55 95 6.1 0.25 0.5 4 5

Specifications

Products Information : Standard Products (Manual, Power Cable), Output Cable(Option), Rack Mount(Option), GPIB Interface(Option),

Input Power of Standard Rack is 110~230VAC 50/60Hz. Operating Condition (0~40, Humiditiy : < 70%).

Upgrade of High Precision Resolution display is Option (PD4-> PR5 digits)


Meter

True RMS 5½ Digital Multimeter

4005,4005G

Features

- True RMS Bench type DMM

- 5½ Resoluion with 10000ms Sampling Time

- Max Measurement Speed: 150rdgs/s

- Max Accuracy: 0.001%

- Built-in Temperature Measurements

- 1GB Nand Flash size Mass Storage

- 4.3” TFT LCD (480x272) Display

- Math Function (Max, min, average, dBm/dB, P/F History, etc.)

- USB Host, Device / LAN / GPIB Interface

The Protek 4005, 4005G(GPIB) True RMS 5½ Digital Multimeter incorporating a dual-readout display. They are

especially well suited for the needs of high-precision, multifuncion, and Automatic Measurement applications.

Function Range

Model4005 GPIB Interface Excluded

4005G GPIB Interface Included

DC-V 200mV~ 1000V

DC-C 200µA~ 10A

AC-V 200mV~ 750V

AC-C 20mA~ 10A

2/4-Resistance 200Ω~ 100MΩ

Frequency 20Hz~ 1MHz

Period 1µs~ 0.05 s

Diode Test Range is Fixed at 2.0V

Capacitance 2nF~ 10000µF

Specifcations


Meter

Function Rage of Measurement Accuracy±( % of Reading + % of Range )

DC Voltage

200mV/ 2V / 20V / 200V1000V

0.015 + 0.004 ~

Input Resistance 200mV ~ 2V range, 10MΩ or 10GΩ Selectable, 20V, 200V & 1000V ,Rang, Input Bias Current <90pA, 25°C, Input Protection 1000V on ALL range

DC Current

200/ 2mA/ 20mA200mA/ 2A/ 10A

<8mV/ <80mV/<0.05V<0.5V/ <0.1V/ <0.3V

0.055 + 0.005 ~

Shunt Resistor 200µA Sampling Voltage <8mV & 2mA Sampling Voltage <80mV1Ω for 20mA. 200mA, 0.01Ω for 2A. 10A, Input Protection : 12A., 250V

Resistance

200Ω/ 2KΩ/ 20K/ 200KΩ2MΩ/ 10MΩ/ 100MΩ

1mA/ 1mA/ 100 / 101/ 200nA/ 200nA ll 10MΩ

0.020 + 0.003 ~

TEST method : 4 wire or 2 wire Resistance selectableInput Protection : 1000V on ALL range

Diode Test 2.0V 1mA 0.05 + 0.01 ~

Continuity-Test 2000Ω 1mA 0.05 + 0.01 ~

Continuity & Diode Test1mA±5% Constant Source or open circuit Voltage / input protection 1000VContinuity threshold : Adjustable , Beeper

True RMSAC Voltage

200mV/ 2V/ 20V/ 200V750V

20Hz/ 45Hz/ 20kHz/ 50kHz 0.2 + 0.05 ~

AC Coupled true RMS Measure · up to 1000V DC bias are Permitted on every Range1mΩ ± 2% in parallel with < 100pF on all Range

True RMSAC Current

20mA/ 200mA/ 2A/ 10A 20Hz/ 45Hz/ 2kHz/ 10kHz 0.5 + 0.10 ~

Frequency / Period 200mV ~ 750V20Hz/ 2kHz/ 20kHz/ 200kHz1MHz

0.01 + 0.003 ~

Capacitance2nF / 20nF / 200nF/ 2µF20µF / 200µF / 10000µF

10µA / 10µA / 100µA/ 100µA1mA / 1mA /1mA

1+0.5 ~

Temperature

RTD α=0.00385 -200°C~ 660°C 0.16°C

TC

B 20°C~ 1820°C

0.5°CE -270°C~ 1000°C

J -210°C~ 1200°C

K -270°C~ 1370°C

N -270°C~ 1300°C

R/ S -50°C~ 1760°C 0.6°C

T -270°C~ 400°C 0.5°C

Interface USB.LAN,GPIB(Option) Display : 4.3" TFT Color LCD

Standard Product Manual, Test-Lead 1Set,Power Cable Meas. Function Auto,Manual,Hold,Math

Sampling / Trigger 1~ 50,000ms 6ms~ 100,000ms Optional

Operating Condition AC 100V~ 240V 20VA 50/60Hz Temperature : 0~50, Humidity : < 70%

History Records 10k Reading Volatile Memory 1Gb Nand Flash Non Volatile Memory

Dimensions 282(H) x 260(W) x 105(D) mm Weight 3.33 kg

Specifications


Meter

Special Features


Meter

True RMS 4½ Digital Multimeter

4000

Features

- High Precision of 51,000 Count, VFD Dual Display

- True RMS AC Voltage & Current Measurement and frequency up to 100kHz

- 12 Measurement functions, including DCV/ACV, DCI/ACI, Resistance, Frequency/Period, Diode,

dBm, Conduction etc.

- Math Parameters AC+DC, AC+Hz, Readout+%, and Readout+dBm Synchronously display

- Measurement Speed : up to 15 times/second and 30 times/second

- DCV Measurement Accuracy up to 0.02%, Resolution of 10µV

- Measured value displayed in the from of percentage(%)

- REL Measurement mode to eliminate stray reading

- Calibration withou uncovering, Limit function (HI/IN/LO) for fast sorting

- SCPI Interface ; RS-232C, USB etc.

- Max Current Measurement : up tp 20A

Parameter DC/AC Voltage, DC/AC Current, Resistance, Frequency, Period, Conduction, Diode

Math Fucntion %, dB, dBm, REL

Method Auto, Manual, Hold

Display VFD, dual display

Reading ModeSingle Display : All measurement parameters Dual Display : ACV+DCV, ACI+DCI, ACV+Hz, ACI+Hz, Readout+dB/dBm, Readout+Max/Min

Trigger Mode INT/MAN/BUS

Reading holdDepending on the accuracy of the products, Users can see the most stable value of each measurement out of the number of readings in general.

Comparator To judge HI,IN,LO and display, with ALARM at HI/LO(selectable)

Interface RS-232C, Supporting SCPI Command

Functions

The New "Protek 4000” 4½ Digital Multimeter is a remarkably improved multimeter with a sample design and a 51,000 counts & high accuracy of 0.02% and high-speed measurement. A high-brightness VDF dual display with excellent measurement efficiency makes the measurement parameters clearly visible to the user. This New "Protek 4000" has significantly improved the internal SMD to differentiate it from the existing model, and it is a low cost, high efficiency model which provides various SCPI communication condition through RS-232C and USB Interface etc.


Meter

Protek 4000 Measurement Speed (Reading/sec, Approximate)Speed (Count/Sec) Slow Middle Fast

DCV,DCI 5 10 25

ACV,ACI 5 10 25

Ω (~5M) 5 10 25

Ω (50M~) 1.3 2.6 5.6

True RMS DC+AC 1.2 1.4 1.5

Freq/ Period 1 2 3.9

Diode - 10 -

Continuity - - 25

Protek 4000 Measurement Range

DC Voltage Max Reading Resolution Accuracy Input Impedance

Range

500mV 510.00 10µV 0.02+0.016 10MΩ

5V 5.1000 100µV 0.02+0.008 11.1MΩ

50V 51.000 1mV 0.02+0.008 11.1MΩ

500V 510.00 10mV 0.02+0.008 10MΩ

1000V 1200.00 100mV 0.02+0.008 10MΩ

DC Current Max Reading Resolution Accuracy Input Impedance

Range

5mA 5.1000 0.1µA 0.05+0.010 <0.6V/100Ω

50mA 51.000 1µA 0.05+0.008 <0.06/1Ω

500mA 510.00 10µA 0.05+0.008 <0.6/1Ω

5A 5.1000 100µA 0.25+0.010 <0.6V/100Ω

20A 20.000 1mA 0.25+0.010 <0.6V/100Ω

AC Voltage 500mV 5V 50V 500V 750V

Resolution 10µV 100µV 1mV 10mV 100mV

Accuracy

20Hz~ 50Hz 1.0+0.08 ~

50Hz~ 20kHz 0.5+0.06 0.35+0.02 0.50+0.03

20kHz~ 50kHz 1.5+0.1 1.00+0.04

50kHz~ 100kHz 3.0+0.3 3.0+0.1

AC Current 5mA 50mA 500mA 5A 20A

Resolution 0.1µA 1µA 10µA 100µA 1mV

Accuracy

20Hz~ 50Hz 1.50+0.16 2.00+0.16

50Hz~ 2kHz 0.5+0.08 0.5+0.1

2kHz~ 20kHz 2+0.16 2+0.12~

Load Voltage/shunt Resistance Same as DC Current

Resistance Max Reading Resolution Test Current Accuracy

Range

500Ω 510.00 10mΩ 0.5mA 0.10+0.010

5kΩ 5.1000 100mΩ 0.45mA 0.10+0.008

50kΩ 51.000 1Ω 45µA 0.10+0.008

500kΩ 510.00 10Ω 4.5µA 0.10+0.008

5MΩ 5.1000 100Ω 450nA 0.15+0.008

50MΩ 51.000 1kΩ 45nA 0.30+0.010

Frequency Max Reading Resolution Accuracy Sensitivity

RAnge

5Hz~10Hz 9.9999 0.0001Hz 0.05+0.02 200mV rms

10Hz~100Hz 99.999 0.001Hz 0.01+0.02 300mV rms

100Hz~100kHz 999.99 0.1Hz 0.01+0.008 300mV rms

100kHz~1MHz 9999.9 10Hz 0.01+0.008 500mV rms

Operating Temperature & Humidity 0~40, ≤90% RH

Power Supply Voltage Range 198~242VAC, 99~121VAC ≤10VA 47.5Hz~63Hz

Display Green LED Display

Interface USB, RS232C, GPIB(Factory Option)

Dimenssions & Weight 277mm(W)*115mm(H)*340mm / Approx. 2.2kg

Standard Products Manual, Test Lead 1Set, Power Cable, Data Cable

Measurement Condition

Calibration Cycle : 1 yearOperating Humidity : 18~ 28, ≤90% RH; (When resistor range is 10M and 100M, ≤70% RH;)Warming up Time : 30 MinAccuracy is expressed as : +/-( % of Reading + % of Range )Temperature Coefficient : 0~ 18 & 28~ 40, +0.1% x Accuracy/

Specifications


Meter

Handheld Digital Multimeter

406

Features

- True RMS

- IEC 1010-2, CAT III 1000V,

CAT IV 600V Safety

- Max 22,000 Count LCD Display

- 46 Segment Bar Graph

- Peak Hold Function

- Data Hold, Range Hold

- High Accuracy of up to 0.1%

- MAX / MIN / REL Mode

- Measurement of Frequency Band width

- Battery Replancement indicator & Input Protection Circuit

- RS-232C (USB) Interface

Protek 406 provides data collection function, and it is possible to do data analysis as well as measurement.

In addition, it is an excellent products with reliability and stability through CAT-III and CAT-IV standards and IEC,

CE certification such as electricity measurement standard.


Meter

Description Protek 406

DC Voltage

Range 220mV 2.2V 22V 220V 600V

Resolution 0.01mV 0.0001V 0.001V 0.01V 0.1V

Accuracy ±(0.1%+5d) ±(0.1%+2d) ±(0.1%+5d)

AC Voltage

Range 220mV 2.2V 22V 220V 750V

Resolution 0.01mV 0.0001V 0.001V 0.01V 0.1V

Accruacy(45Hz ~ 1kHz) ±(1.0%+10d) ±(0.8%+10d) ±(1.2%+10d)

(1kHz ~ 10kHz) ±(1.5%+50d) ±(1.2%+50d) ±(2.0%+50d) ±(3.0%+50d)

DC Current

Range 220 2200 22mA 220mA 10A

Resolution 0.01 0.1 0.001mA 0.01mA 0.001A

Accuracy ±(0.5% + 10d) ±(1.2% + 50d)

AC Current

Range 220 2200 22mA 220mA 10A

Resolution 0.01 0.01 0.001mA 0.01mA 0.001A

Accuracy(45Hz ~ 1kHz) ±(0.8%+5d) ±(1.2%+10d) 1kHz~5kHz

(1kHz ~ 10kHz) ±(1.2%+50d) ±(1.5%+50d) ±(2.0%+50d)

Resistance Measure

Range 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 22MΩ 220MΩ

Resolution 0.01Ω 0.0001kΩ 0.001kΩ 0.01kΩ 0.0001MΩ 0.001MΩ 0.01MΩ

Accuracy ±(0.5% + 10d) ±(0.8% + 10d) ±(1.5% + 10d) ±(3.0% + 50d)

DiodeMeasure

Range Open Circuit Voltage 2.8V

Resolution 0.0001V

Accuracy ±(2.0% + 5d)

Band widthMeasure

Range 45Hz ~ 10kHz

Resolution 0.1

FrequencyMeasure

Range 10Hz ~ 220MHz

Resolution 0.001Hz


Audio Audio Frequency can be measured when Input voltage is over 15V(Same Frequency)

Duty RatioRange 0.1% ~ 99.9%

Resolution 0.1%

Capacitance

Range 22nF 220nF 2.2 22 220 2.2mF 22mF 220mF

Resolution 0.001nF 0.01nF 0.0001 0.001 0.01 0.0001mF 0.001mF 0.01mF

Accuracy ±(3.0% + 5d) ±(4.0% + 5d) ±(5.0% + 5d)~

Capacitance

Range 30Ω, Open Circuit Voltage -1.2V

Resolution 0.01Ω

Accuracy >30Ω, <10Ω Buzzer, ±(2.0% + 5d)

Power 9V NEDA1604, 6F22, 006P Size Battery

Display Bar Graph, Dual Mono Back Light LCD (On/Off)

Operating Condition

0~ 40 (When stored -10~50), Humidity : <70% RH

Standard Products

Manual+Program CD, Test Lead 1Set, RS232 Cable, General Socket

Option USB Interface Cable, General Socket, 10A H 240V ф6x25mm.

Weight ±370g Dimensions 180mm(H) x 87mm(W) x 47mm(D)

Specifications


Meter

D705T

Features

-True RMS

- IEC 1010-2-032, CAT III 1000V,

CAT IV 600V Safety Protection

- 5000 Count LCD Display

- 25 Segment Bar Graph

- Data Hold, Range Hold

- MAX / MIN / AVG Mode(Sampling Rate : 100ms)

Description Specification

DC VoltageRange 400mV 4V, 40V, 400V, 1000V

Accuracy 0.3% +2d 0.5% + 2d

AC VoltageRange 400mV 4V, 40V, 400V, 750V

Accuracy 1% + 3d 1.5% + 5d

DC CurrentRange 400µA, 400mA, 20A

Accuracy 1% + 2d

AC CurrentRange 400µA, 400mA, 20A

Current 1.5% + 3d

Handheld Digital Multimeter

The Protek D705T is a comptact & portable Multimeter thatn can be safely used in the field as well as in the

electric field by obtaining CE / UL certificate, safety CATIII 1000V and CAT IV 600V.

Specifications


Meter


DC Voltage

Range 500mV 5V 50V 500V 1000V

Resolution 0.1mV 0.001V 0.01V 0.1V 1V

Accuracy ±(0.09%+2d) ±(0.09%+5d) ±(0.09%+2d) ±(0.09%+2d) ±(0.09%+2d)

AC Voltage

Range 500mV 5V 50V 500V 1000V

Resolution 0.1mV 0.001V 0.01V 0.1V 1V

Accuracy

(45Hz ~ 500Hz) ±(0.8% + 5d) True RMS

(500Hz ~ 1kHz) ±(1.0% + 5d) True RMS

DC Current

Range 500 5000 50mA 400mA 5A 10A

Resolution 0.1 1 10 100 1mA 10mA


AC Current

Range 500 5000 50mA 400mA 5A 10A

Resolution 0.1 1 10 100 1mA 10mA

Accuracy

(45Hz ~ 500Hz) ±(0.8% + 5d) True RMS±(1.5%+10d)

True RMS±(0.8%+5d)True RMS

(500Hz ~ 1kHz) ±(2.0% + 5d) True RMS±(2.0%+10d)

True RMS±(2.0%+5d)True RMS

ResistanceMeasure

Range 500Ω 5kΩ 50kΩ 500kΩ 5MΩ 50MΩ

Resolution 0.1Ω 0.001kΩ 0.01kΩ 0.1kΩ 0.001MΩ 0.01MΩ

Accuracy ±(1.0% + 5d)±(1.5%+ 10d)

DiodeMeasure

Range 2V

Resolution 0.001V


TempMeasure

Range -40 ~ 400 -40 ~ 752

Resolution 0.1 0.1

Accuracy ±(3.0% + 3.0) ±(3.0% + 5.4)

FrequencyMeasure

Range 9.999Hz 99.99Hz 999.9Hz 9.999kHz 99.99kHz 999.9kHz

Resolution 0.001Hz 0.01Hz 0.1Hz 1Hz 10Hz 100Hz


Sensitivity Vpp = ±300mV (Square wave input)

Duty Ratio

Range 1.0% ~ 99.0%

Resolution 0.1%

Accuracy 0.5Hz to 300kHz (Pulse width > 3)(0.1%+0.05% per kHz+1count)for±6

00mV p-p Square wave input

Capacitance

Range 40nF 400nF 4 40 400 4000

Resolution 0.01nF 0.1nF 0.001 0.01 0.1 1

Accuracy ±(3.0% + 10d)±(3.5%+ 30d)

ContinuityMeasure

Range 500Ω Threshold Response time

Resolution 0.1Ω

Accuracy ±(1.0% + 5d) Approx. 25Ω 1msec

Power 1.5V AAA Size Battery(2)

Display Bar Graph, Dual MONO Back Light LCD (On/Off)

Operating Condition 0~ 40 (when stored -10~50), Humidity : ±70% RH

Standard Products Manual, Test Lead 1Set

Weight ± 350g Dimensions 89mm(H) x 180mm(W) x 48mm(D)

Specifications


Meter

260TR

Features

- Mirror scale for accurate Reading

- AC/DC Voltage Measurement

- DC Current Measurement

- Resistance Measurement

- Diode & Continuity Test

- Transistor Test

Description Protek 260TRFunctions Range Sensitivity Accuracy

DC Voltage2V / 5V / 10V / 50V250V / 1000V

20000Ω/V ±3%

AC Voltage10V / 50V / 250V1000V

8000Ω/V0~≤50V to 10kHz50~ ≤250V to 20kHz

±4%

DC Current2.5mA / 25mA /250mA / 10A

Voltage drop : 0.25V ±3%

Resistance Measurement

R x 1 : 0~ 2000Ω / R x 10 : 0~ 20000ΩR x 1k : 0~ 2MΩ / R x 10k : 0~ 20MΩ

±3° Arc

Short CircuitCurrent

R x 1 : 150mA, 3V / R x 10 : 15mA, 3VR x 1k : 150µA, 3V / R x 10k : 60µA, 12V

±3%

dB Measurement

-10dB~ +22dB (AC 10V Range) / +4dB~ +36dB (AC 50V Range)+18dB~ +50dB (AC 250V Range) / +30dB~ +62dB (AC 1000V Range)* 0dB : 600Ω 1mW

Diode/Transistor/Conduction Test

Diode : XIK (0~150µA) or X10(0~15mA), Scale display ± 0.2~0.8V Transistor Quality Judgement : NPN or PNP / Conduction Test : 1~ 10Ω

Operating Condition

< 23°C±5°C Dimension & Weight 102 x 150 x 45 (mm) 370g

Power Supply 9V 1 Battery Standard Products Cover, Lead 1Set

Handheld Analog Multimeter

Specifications


Meter

JT-10

Features

- 4000Count Display

- Automatic Measurement & Data Hold

- Low Power Alert

- Body-intergrated test lead

- Battery Voltage Test

- Diode, Capacitance, Conduction Test

Description JT-10Functions Range Sensitivity

DC Voltage 400mV ~ 400V ±(1.5%+2d)

AC Voltage 4V ~ 400V ±(2.0%+5d)

DC Current 400µA ~ 200mA ±(2.0%+4d)

AC Current 400µA ~ 200mA ±(3.0%+4d)

Resistance 400Ω ~ 40MΩ ±(2.0%+4d)

Capacitance 40nF ~ 40µF ±(2.0%+5d)

Frequency 10Hz ~ 10MHz ±(1.0%+4d)

Duty Cycle(5) 0.1%~ 99% ±(2.0%+2d)

Battery Test < 1.5V Battery ±(1.0%+2d)

Diode Test < 0.4 ~ 0.7V Display OL

Conduction Test 40Ω or less OL Ω Display or Buzzer

Data Hold, Auto Measure Yes Auto Range, Data Hold

Auto Power Off Yes Shut-down when not used for 10 min

Display 4,000 Count MONO LCD Display

Operation Power LR-44 x 2EA Battery Low Alert

Operation ConditionTemperature : 0~ 40Humuditiy : <80% RH

Storage Temperature:20~ 40 Humudity : <70% RH

Dimensions & Weight 60mm(W)X100mm(D)X10mm(H) ±150g

Standard Products Manual, Body-Integrated Test Lead

Pocket Digital Multimeter

Specifications

Protek JT10 is a pocket sized digital multimeter with a small size. It is recommended for people who are not

confortable with heavy products of those who do simple measurement.


Meter

307

Features

- True RMS, 4000 Count

- 40 Segment Bar-Graph

- AC/DC 1,000A

- Voltage, Frequency, Resistance

- Data Hold Function

- Average Power, Apparent Power & Power Factor

- RS 232 Interface

휴대용 클램프 미터

SpecificationsDescription Specification

DC VoltageRange 4V 40V, 400V, 600V

Accuracy ±(0.1% rdg + 3d) ±(0.5% rdg +3d)　

AC VoltageRange 4V, 40V, 400V, 600V

Accuracy ±(1.5% rdg + 5d)

DC CurrentRange 400A / 1000A

Accuracy ±(2.0% rdg +5d)

AC CurrentRange 400A / 1000A


The Protek 307 can measure not only current but also voltage, current, frequency, resistance and power.

In addition, it is portable and easy to use in various fields and equipped with electric facility maintenance and

measurement data function.


Meter


DC Voltage

Range 4V 40V, 400V, 600V

Accuracy ±(0.1% rdg +3d) 　±(0.5% rdg +3d)

Input Impedance 10MΩ

Max Input Voltage 1,000V DC

AC Voltage

Range 4V, 40V, 400V, 600V

Accuracy ±(1% rdg + 5d)

Input Impedance 10MΩ

Max Input Voltage 750V AC rms 45Hz ~ 1kHz

DC Current

Range 400A / 1000A


Input Impedance 0.1A / 1A

Max Input Voltage 1000A(Within 1Minute)

AC Current

Range 400A / 1000A


Input Impedance 0.1A / 1A

Max Input Voltage 1000A(Within 1Minute)

Resistance

Range 400 / 4k / 40k / 400k / 4M / 10MΩ

Accuracy ±(0.5% rdg +3d) / 4M: ±(1.0% rdg +5d) / 10M: ±(2.0% rdg +5d)

Input Impedance 100mΩ / 1Ω / 10Ω / 100Ω / 1kΩ / 10kΩ

Max Input Voltage 250Vrms

Frequency

Range 10kHz / 100kHz / 1MHz


Input Impedance 1Hz / 10Hz / 100Hz

Max Input Voltage 750V AC

Power

Range 600kW


Input Impedance 100W

Max Input Voltage ACW: 1000V rms, 1000A / DCW: 1000V DC, 1000A

Apparent

Power

Range 600VA


Input Impedance 1VA

Max Input Voltage 1000V / 1000A

Power

Factor

Range 0.03 ~ 1


Input Impedance 0.01

Max Input Voltage 1000V / 1000A

Measuring Method Dual Integration Mode

Display 3 3/4 Digits LCD, Max. Reading '3999'

Bar Graph Display 40 Segments

Range Auto or Manual Range

PolarityAutomatic No Indication for Positive

Polarity Minus (-) sign for Negative Polarity

Sampling Digital 2 Times / Sec Bargraph 20 Times / Sec.

Interface Sensing Type RS232C

Low Battery Indication "BAT" Light 2.4 ± 0.3V

Operating Condition 0 ~ 40 (Below 80 R.H)Non-Condensing

Temperature Coefficient (0 ~ 18), (28 ~ 40) Accuracy X 0.1

Storage Temperature -20 ~ 60 (Below 70 R.H) Non-Condensing

Power Supply 9V Battery X 1pc(307)

Auto Power Off 30 Minutes

Dimensions & Weight 44(H) x 86(W) x 273(D) mm / ± 900g

Standard Products Manual, Test Lead 1set, RS232 Cable

Specifications


Meter

1240C

Features

- diameter ф 32mm / 65X32mm

- Automatic Resistance Measurement

from 0.01 to 1200 Ω

- Automatic Current Measurement

from 0.10 mA to 30A

- Data Collection through RS232C

- Alarm Function and Data Hold

- Bulit-in Memory ( 100 group data storage )

- Noise detection function

- HIgh resolution of 4 Digit Display

Earth Resistance Clamp Tester

Clamp Type high performance earth resistance meter "Protek 1240C Series" is mainly used for electric power,

telecommunication, meteorological, oil field, architectural and industrial electric equipment, facility measurement.

"Protek1240C" is a products that can measure the circuit grounding system without separating the ground

deflector without a seperate auxiliary electrode, and can make its own measurement through the intergral value

of the grounding resistance of the main body and the grounding lead resistance.

Series


Meter

Description Protek 1240C Protek 1240C+

Method Function Earth Resistance Test, Loop Resistance Automatic Test

Clamp Jaws Size Φ32mm 65mmX32mm

Input Power 6VDC ( 1.5V AA Alkaline Battery 4pcs )

Safety IEC/EN61010-1, IEC/EN6010-2-032 / IP30, IK04 Protection Level

Resistance Measurement Range 0.01~ 1,200Ω

Resistance Resolution 0.001Ω

Resistance Measurement Accuracy ±1%±0.01Ω

Leakage & Current Range 0.00mA~ 30.0A (True RMS)

Over Current Safety About 5 time/sec MAX 40A

Current Resolution 0.05mA

Current Measurement Accuracy ±2.5%±1mA

Over Voltage Safety CAT-III 150V to Ground, MAX 20A

Number of Internal Storage Memories 0~ 99 group

Alarm Setting Range Resistance：1~ 199Ω

Alarm Beep Self-beep and Alarm LED Light (Control via AL Button)

Interference signal recognition Display the NOISE symbol with its own beep

Operating Condition -20~ 55；20％RH-90％RH

Display MONO LCD Display (4 Digit) / Size : 47mm×28.5mm

Clamp Diameter Size 32mm

Weight ±1100g 내외 (including Battery) ±1120g (including Battery)

Dimension 260(280)mm(D)×90mm(W)×66mm(H)

Protection Self-Double Insulation CLASS-II

Structure Clamp, CT

Measuring Method Autuomatic Measurement(4-digit auto rage) & Measurement Value Hold

External Magnetic field ＜40A/m

External Field ＜1V/m

Measurement Sampling 0.5 Sec(one second)

Resistance Measurement Frequency ＞1KHz

Alternating Current Frequecy 50/60Hz Auto

Battery Indication Low Battery display if the battery voltage is less than 5.3V

Data Storage Method Press the MEM button and select a group from 0 to 99

Display Range On-Screen ragne display "OLΩ", "L0.01" or "OL A"

Auto Power Auto-off after 5 minutes standby

Power Consumption Operating current consumption of 50mA and 30hours continuous operating

RS232 Interface(Option) Data acquisition using RS-232 Interface

Certification Certification of CE, SCM

Standard Products Manual, Hard case(bag), Test Loop

Specifications


Meter

1680LC

Features

- 68фmm, wide clamp diame

- Online monitoring via USB Interface,

Data Records View is available

- Measurement & Data hold of Max/Min value

- 99 units store in internal memories

- 0.00mA ~ 1200A Measurement

- High Accuracy of 0.01mA resolution

AC Leakage Current Clmap Meter

The Protek1680LC Leakage Current Clamp Meter is specifically designed for online measurement of AC

leakage current at voltages below 600V. With CT & digital intergration technology, there is no metal conductor

outside the clmap, which makes non-contact testing possible. It is widely used in the fields of electricity,

communication, meteorology, railway, oilfield, construction, measurement, science and reserach, industry and

mining. The Protek 1680LC is a compact size, wide clamp diameter of 68фmm, high accuracy and efficiency,

which is essential for the safety test of electric techinicians.

Series


Meter

Description Protek 1680LC

Function AC Leakage Current Measurement, AC Current & Online Measurement

Power 6F22, Zn-Mn dry 9V Battery 1pc

Measuring mode Clip-on CT，integral mode

Display 4 digits MONO LCD Display

Dimension Width × Height× Thickness：175mm×70mm×38mm

LCD Dimension 35mm×21.5mm；display domain：32mm×15mm

Sampling Speed about 2 times/s

Frequency 50/60Hz 내외 자동

Measurement Method Automatic Measurement of Range

Accuracy（23±3,below 70%RH）

0.00～59.9A: ±1.5%±5dgt

60.00A～199.9A: ±2%±5dgt

200.0A～599.A: ±3%±5dgt

600.0A～1200A: ±4%±5dgt

Voltage Range AC600V

USB Interface Upload data to PC via USB or Monitoring Online

Storage Up to 99

Peak Hold Peak value is displayed on the meter display while the HOLD button is pressed

Reading Hold Hold & Read Measurement Data

Out of Range OL (Over Load) display when the current is over the measurement range

Auto Power-off Auto Power-off when not in 5 minutes

Battery Alarm Replace if battery voltage drops below 7.2V

Dimension 175mm(W) X 70mm(H) X 38mm(D)

Weight 120g（including battery）

Power Consumption ± 5mW

Operating ConditionsTemperature :0～40, Humidity: 80%rh,

When Stored :-10～60, Humidity : 70%rh

Insulating Strength AC2kV/rms (between clamp and metal housing)

Safety IEC1010-1、IEC1010-2-032、pollution, etc 2、CAT Ⅲ(600V)

Standard Products Manual, USB Data Cable, Program CD, Pouch

Specifications

“68”фmm Jaws Size


Meter

9216A

Features

- Basic Accuracy of 0.05%

- 5 Test Frequencies

- Store up to 9 Setups in the Memory

- RS232C Interface

Accessories

- Radial Fixture

- DB25 Male Connector

- Kelvin Clips(Option)

- SMD Tweezers(Option)

Description Protek 9216AMeasurement Modes Auto, R+Q, L+Q, C+D, C+R

Equivalent Circuit Serial or Parallel

Parameters DisplayedValue, Deviation, % Deviation or Bin Number.

Deviation and % deviation are calculated from a stored relative value.

Averaging 2 ~ 10 Measurement

Measurement Range

R+Q R 0.0001Ω ~ 2000MΩ Q 0.00001 ~ 50

L+Q L 0.0001µH ~ 99999H Q 0.00001 ~ 50

C+D C 0.0001pF ~ 99999µF D 0.00001 ~ 10

C+R C 0.0001pF ~ 99999µF R 0.00001 ~ 99999kΩ

Test Frequency 100Hz, 120Hz, 1kHz, 10kHz, 100kHz

Frequency Accuracy ±100ppm

Drive Voltage 0.1V, 0.25V, 1Vrms

Drive Level Accuracy ±2%

Measurement Speed

Slow, Medium, Fast: 2, 10 or 20

measurements per second at test frequencies of 1kHz and above and about

0.6, 2.4 or 6 measurements per second at 100Hz and 120Hz

Ranging Auto or Manual

Trigger Through External Trigger, Continuous, Manual or Remote over RS232 interface

Bias Voltage Internal ==> 2.0VDC ±2% External ==> 0 to +40VDC ([email protected])

Conditions At least 30 minute warm up, 23±5, < 70%

Power Supply 110~ 240 VAC 50/60Hz, ±50W

Basic Accuracy 0.05%

Interface RS232

Standard Products Manual, Texst Fixture 1pc, Power Cable

Dimensions & Weight 363mm(W) X 109mm(H) X 386mm(D) / ± 5.8kg

100kHz Bench Type LCR Meter

The Protek 9216A is a useful too measuring a device characteristics with various functions. It has more than 13 orders

of magnitude, basic accuracyh of 0.05% and 5 test frequencies.

Specifications


Meter

9216B200kHz Bency Type LCR Meter

High technology & quality circuit design and concentrating essence of LCR Test, Protek-9216B is a new generation

compact LCR Meter of low cost and high performance. Also of traditional mechanical power switch, it New Software

control power switch. The basic accuracy of 0.05% and good test stability can compare favorably with that high-end

model. Being equipped with 4.3" inch TFT LCD Display and brand new interface system, Protek-9216B LCR Meter

possess elegant appearance and easy operation. Also, being provided with various interfaces and good compatibility

with SCPI commands, Protek-9216B LCR Meter is convenient for constituting all kinds of test system and satisfy

various kinds of demands for inspection, and scientific research.

Features

- Low cost, high performance, Small Size

- 4.3” TFT LCD & Dual display

- Max 200kHz Test Frequency

- Max 6 Digit Reading Resolution

- 10mVrms~2.0Vrms Programmable Signal Level, 0~±5V50mA

Built-in bias source

- DCR, 50mV~ 2V Programmable test level, 10µΩ Resolution

- Ls-Rd / Lp-Rd Function (L, Rd display simultaneously)*

- Highest test speed 13ms/time

- Selectable 30Ω/100Ω Impedance Signal Source

- V/I Monitor and auto level adjustment function

- Built-in comparator, 10Bins sorting and count function

- File Storage and fimware update through USB Disk

- RS-232C, RS485, USB, HANDLER, GPIB Interface

* Rd means DCR


Meter

Description Protek 9216B

Basic MeasurementAccuracy

LCRZ 0.05%

DCR 0.1%

Cabliration Condition

Warm up time : ≥30minutes ; Environment temperature : 23±5

Signal Level : 1Vrms ; Correction: after OPEN, SHORT

Testing cable length : 0m

Test Signal Frequency 20Hz ~ 200kHz

SIgnal Source Output Impedance 30Ω, 100Ω, ±1% @1kHz

AC Test Signal Level

Normal

10mV~ 2Vrms

Resolution : 10mV / Accuracy : 10% x Setting voltage+2mV

100µA~ 20mArms / Resolution : 0.1mA

Constant level(ALC ON)

20mA~ 1Vrms

Resolution : 10mV / Accuracy 10%

200µA~ 10mArms / Resolution : 0.1mA

DCR test signal level 50mV~ 2V DC / Resolution : 0.5mV

DC Bias Voltage Source

0V~ ±5V

Resolution : 0.5mV / Accuracy 1%

0mA~ ±50mA

Resolution : 0.5µA

Test Parameter lZl, lYl, C, L, X, B, R, G, D, Q, θ, DCR

DCR Display Range 0.00001 Ω~ 99.9999 MΩ

LCR Parameters Display Range

lZl, R, X 0.00001Ω ~ 99.9999Ω

lYl, G, B 0.00001µs ~ 99.9999s

C 0.00001pF ~ 9.99999F

L 0.00001µH ~ 99.9999Kh

D 0.00001 ~ 9.99999

Q 0.00001 ~ 99999.9

θ(DEG) -179.999° ~ 179.999°

θ(RAD) -3.14159 ~ 3.14159Ω

Δ% -999.999% ~ 999.999%

Display Digits 6 digits

Measurement Time (≥10kHz)Fast : 75meas/sec(13ms), Medium : 11meas/sec(90ms)

,Slow : 2.7meas/sec(370ms)

Equivalent circuit Serial, Parallel

Range Mode Auto, Hold

Trigger Mode Internal, Manual, External, Bus

Average time 1-255

Correction Open, Short, Load

Math operation Direct reading, ΔABS, Δ%

Specifications


Meter

Description Protek 9216B

Trigger Delay Time Setting 0 ~ 60.000s 1ms steps

Step Delay Time Setting 0 ~ 60.000s 1ms steps

List Sweep

- 10 points list sweep

- Frequency, AC voltage/current, internal/external

bias voltage/current can be swept.

- Each sweep point can be sorted separately

Comparator Function

10 bins, BIN1-BING9, NG, AUX

Bin count function

PASS, FAIL LED Display on front panel

Built-in Storage Internal 100 LCRZ instrument setting files, 201 times test results

USB StorageInstrument setting files, measurement result CSV fIles,

printed screen (GIF format)

Interface

Control HANDLER

Communication USB HOST, RS-232C, RS485(optional), GPIB(optional)

Storage USB DEVICE ( U-Disk storage )

Dimension 235mm(W) * 105mm(H) * 360mm(D)

Weight ± 3.6 kg

Standard Products Manual, TEST FIXTURE, Power Cable, Fuse(1), CD, USB Cable

Specifications

HANDLER

Setting Screen Dtat Storage Screen

High Resolution Measurement Screen


Meter

505AHandheld Power Quality Analyzer

Protek 505A is portable power quality analyzer that can be easily used at the filed of electric technology. It is equipped

with easy data reporting function as well as 3-phase measurement.

Features

- Voltage, Current, Power Trend Analytical record

- 600V AC, 1000A AC True RMS Measurement & Record

- Single Phase of sequential method

- 3-Phase & unbalanced 3-phase measurements.

- Harmonic (~50th) measurement & record

- DC(Offset) component Measurement of Voltage & Current

- Detect inrush current & record and display the change of half cycle RMS

- Long testability and instantaneous event record

- Differential input, Real-time Clock

- Snapshot recording with data capture

- Bluetooth & USB Interface

- Mutual data transfer & math function using two products.

Safety 600V

CAT I,II,III Voltage

IEC 60664, CE


Meter

Function Measurement Range Resolution Accuracy

Frequency 40 69 0.01 ±1dgt

T-RMS Voltage 4V 600V 0.1V ±(0.5%+5dgt)

DC Voltage 4V 600V 0.1V ±(0.5%+5dgt)

T-RMS Current 40A 1,000A 1A ±(0.75%+CT Tolerance)

DC Current 40A 1,000A 1A ±(0.5%+CT Tolerance)

Half-period T-RMS Vol. 4V 600V 0.1V ±(0.8%+5dgt)

Half-period T-RMS Cur. 40A 1,000A 1A ±(0.75%+CT Tolerance)

Peak Voltage 4V 600V 0.1V ±(0.75%+5dgt)

Peak Current 40A 1,000A 1A ±(0.75%+5dgt)

Crest factor 1.00 9.99 0.01 ±(5%+5dgt)

Active power 0W 600.0kW 4 digits±(1%+5dgt), Cos≥0.8±(1.5%+10dgt), 0.2≤Cos＜0.8

Reactive power 0VAR 600.0kVAR 4 digits±(1%+5dgt), SinΦ≥0.5±(1.5%+10dgt), 0.2≤Sin＜0.5

Apparent power 0VA 600.0Kva 4 digits ±(1%+5dgt)

Power factor -1 1 0.001±(1.5%+5dgt), Cos≥0.5±(1.5%+10dgt), 0.2≤Cos＜0.5

Active power 0Wh 9,999MW 4 digits±(1%+5dgt), Cos≥0.8±(1.5%+10dgt), 0.2≤Cos＜0.8

Reactive power 0VARh 9,999MVARh 4 digits±(1%+5dgt), SinΦ≥0.5±(1.5%+10dgt), 0.2≤Sin＜0.5

Apparent power 0VAh 9,999MVAh 4 digits ±(1%+5dgt)

Phase shift -179° 180° 1° ±(2°)

Displacement factor(DPF)

-1 1 0.001±(1°) on Φ±(5dgts) on DPF

Tangent VA ≥ 50VA -32.76 32.76 0.001 TanΦ＜10 ±(1°) on Φ

Level of harmonicsOrder (VRMS > 50V)

0% 999.9% 0.10% ±(1%+5dgt)

Angles of harmonics(VRMS > 50V)

-179° 180° 1°±(3°), 0rder∈[1;25]±(10°), 0rder∈[26;50]

Global level ofharmonics (THD-F)

0% 999.9% 0.10% ±(1%+5dgt)

Distortion factor(THD-R) 0% 999.9% 0.10% ±(1%+10dgt)

K factor 1 99.99 0.01 ±(5%+5dgt)

Environment Specification

Parameter Reference Environment

Operation Environment Max 73° ± 5°F (23° ± 3°C) Humidity ± 45 to 75%

Working pressure 25.4" to 31.3" Hg (860 to 1060 hPa)

Phase-to-earth voltage 50 to 600Vrms without DC (< 0.5%)

Clamp current circuit input voltage

30mVrms to 0.4Vrms without DC (<0.5%)

Network frequency 50 and 60Hz ± 0.1Hz

Phase shift 0° active power / 90° reactive power

Harmonics <0.1%

Balanced 3-Phase connection 3φ mode OFF

Measure method Sequential wiring measurement in 3-phase measurement

Specification


Meter

SpecificationSpecification

Voltage Input

Operating Range: Phase-Phase - 0 to 660Vrms AC/DC*

Phase-Neutral - 0 to 600Vrms AC/DC

*Provided that the max with 600Vrms in regards to earth is not exceeded

Input Impedance: 451kΩ

Overload: 1.33Vn (Vn = nominal voltage)

Current Input

Operating Range: 0 to 1V

Input Impedance: 1MΩ for current probe circuit

Overload: 1.7V

Sample Rate: 10.24kHz

Hardware Specification

Weight & Dimensions 100mm(W)x220mm(D)x54mm(H) / 800g (including battery)

Power Source Input AC 100V~ 240V @ 50/60Hz 0.5% Adapter Output DC 12V 1A

Battery Capacity 6Ni-MH Rechargeable Battery Pack >1,800mAh 7.2V,0.8A

Battery powered Max 8 hours standby & continuous use (4 hours charge)

Shock Vibration / Airtight EN 61010-1 / IP54 EN60529

Storage drive / Temp. & Humidity Operation: 0~ 50, Storage: -20~ 50, Humidity: within 10~ 85%

Display 240X160 Pixel Mono Graphic dot back light LCD (ON/OFF)

Interface USB , Bluetooth(Option)

Standard products Test Lead, Manual, CD(Reporting Software), Adaptor, Battery

Measuring Clamp(Option) Current Clamp (200A~ 1000A )


Meter

606AHandheld Battery Quality Analyzer

Protek 606A is designed to prevent and inspect the power system failure of quality problems caused by the bad light

consumption of the battery.

It is handheld battery analyzer that efficiently analyzes the installation and management status of the battery and

diagnoses and evaluates the performance right on the spot

Features

-Impedance measure mode (Impedance+DCV+Temp)

-DC Voltage + Ripple voltage (Simultaneous measure)

-DC Voltage + DC Current (Simultaneous measure)

-AC Voltage + AC Current (Simultaneous measure)

-Ripple Current, Floating Current (Sequential measure)

-Battery Life & Replacement time

-Capacity Analyzer(Charge / Discharge Test)

-Hydrogen gas detector(UPS system status check)

-Battery unit installation environment and safety check

-Bluetooth Interface(E-mail, PC Interface)

-Battery charge rate, efficiency measurement

Safety 500VCAT I,II,III Voltage SpecificationCE Certification


Meter

Safety 500VCAT I,II,III Voltage SpecificationCE Certification

SpecificationsSpecifications

Impedance MeasureRange : 3mΩ~ 300Ω (6Range)Accuracy : ±0.8%rdg±10dgtsBattery Pack Test voltage ; Max DC/400V

DC Current MeasureRange : 5V~ 500V (3Range)

Accuracy : ±0.5%rdg±5dgts

AC Voltage MeasureRange : 500V (1Range)

Accuracy : ±0.75%rdg±5dgts (40Hz~500Hz)

AC Ripple Voltage MeasureRange : 5V (1Range)

Accuracy : ±2.5%rdg±10dgts (Max 10kHz)

DC/AC Current MeasureRange : 4A,40A,400A,1000A

Accuracy : ±0.5%rdg±5dgts+CT Tolerance

Temperature(NTC Sensor) MeasureRange : -10~ 100

Accuracy : : ±1±2dgts

Data Storage & InterfaceInternal Memory : 8MB(up to 250String)

Bluetooth : E-mail sending, Data transfer with PC connection

Power SourceInternal Battery : 7.4V/5.4A(Li-ion)External Adaptor: 12V/2.5A Battery Time : up to 8 hours

Standard productsMeter bar 1SET, Manual, Bluetooth connector

Data interface CD 1Copy, External Adaptor

OptionalCurrent Clamp adapter(CT), Temperature sensor, Warranty Extension (Basic

Warranty is 1 year)

Weight & DimensionsDisplay : 4” Mono LCDSize : 232mm(L)X192mm(W)X111(H)mmWeight : 1.4kg (Including Battery)


Accessories

Optional Model Description

PCP-505040MHz, 50A

PCP-530012MHz, 300A

The PCP5000 probe can measure high frequency AC/DC1. Fast and accurate current waveform capture with high bandwidth2. 1% measurement accuracy3. Convenient measurement range change(low current)4. Automated degaussing function.5. Over current Alert function(sound, light)6. Touch-button for long-term use

PCP-4060100kHz, 60A

PCP-4200150kHz, 200A

The PCP4000 probe is accommodated equipment that electromagnetic induction technology for AC / DC current measurement.

1. To measure up to 200A2. Accurate Voltage output(mV)3. Cable measurement in thin space

PDPB-305050MHz100:1, 10:1800V p-p 50Ω

DPB3050 is a differential probe for power electronics measurement

1. 500 MHz Bandwidth2. Attenuation ratio of 100 : 1 / 10 : 13. Max input differential voltage ±800Vp-p

Protek PCP-5000 SeriesCurrent Probe

Protek PCP-4000 Series Current Probe

Protek PDPB-3050Differential Probe

Protek-Accessories


Accessories


Protek PHPB-401550MHz, 15kV1000:1High Voltage Probe

The PHPB-4015 is high voltage probe.

1. Bandwidth : 1.5MHz2. Attenuation ratio : 1000X3. Max operation voltage : 15KV4. Function

- Dynamo experiment- HVD test- Floating ground test

Protek PDPB-4050Differential Probe50MHz, 6500V100:1,200:1,500:11000:1

The PDPB-4050 is differential probe.

1. High Voltage Test2. Dynamo Test3. HDV Test4. Instantaneous Voltage5. Floating ground test

Protek PSRF503Magnetic NearProbe30MHz ~ 3GHz

PDPB3050 Differential Probe For Power Electronic Measurement

1.500MHz Bandwidth2.100:1 / 10:13.Up to ±800Vp-p Input Differential Voltage

ProtekPassive Probe

PP350 (350Mhz 10:1 DSO Probe)




GP100 (100Mhz 10:1 DSO Probe)

GP60 (60Mhz 10:1 DSO Probe)

Standard

1MΩ / 10MΩ , 300V / 600V

Protek-Accessories


Accessories

Protek-AccessoriesOptional Model Description

ProtekBNC to Clip

Protek Measurement DSO & AFGAccessories

ProtekDC-Power Supply

Lead Clip

Protek DC-Power Supply( Regulated Type )

Alligator Clip typeDigital Multimeter

Test Lead

1000V. 10AAlligator Clip + Test Lead Set

ProtekBCN to BNC Cable

BNC Cable for Signal input/output(Common for BNC type)

ProtekCurrent Clamp

RangeAC/DC 40A / 1mV/AAC/DC 400A / 1mV/A505A Power Quality Analyzer606A Battery Tester


Accessories

Protek-AccessoriesOptional Model Description

ProtekDigital Multimeter

Test - Lead

Protek 4000 1000V , 20A CAT1,2

Protek 9216BSMD Tweezer

Protek LCR Meter (9216B) Accessories

Protek LCR Meter (9216) Accessories

Protek 9216Kelvin Clip

Protek 9216Trans Fixture

Protek 9216BTest Fixture


Accessories


RS-232C Module Protek 4000 & 9216B Option

GPIB Module Protek 4000 & 9216B Option

ADM288Multimeter for Vehicle

Battery voltage check(0~30V)Startup starter battery checkLamp lighting test(LED lit)Relay, Power window, conduction testShort breaker (operation at 7.5A or more)One-touch operation light, buzzer functionUsed Power(12V/24V vehicle battery)

ProtekRS-232C Cable

PC to TMC Connector

USB to TMCCommunication cable

USB to PCCommunication cable

Protek-Accessories

Documents

General Purpose Instruments - ES Instrumentación