Upload
harry-goodman
View
221
Download
0
Embed Size (px)
Citation preview
General Physics II, Lec 7, By/ T.A. Eleyan
1
Additional Questions(The Electric Potential)
General Physics II, Lec 7, By/ T.A. Eleyan
2
[1] What potential difference is needed to stop an electron with an initial speed of 4.2×105m/s?
[2] An ion accelerated through a potential difference of 115V experiences an increase in potential energy of 7.37×10-17J.
Calculate the charge on the ion.
[3] An infinite charged sheet has a surface charge density s of 1.0×10-7 C/m2. How far apart are the equipotential
surfaces whose potentials differ by 5.0 V?
[4] At what distance from a point charge of 8mC would the potential equal 3.6×104V?
General Physics II, Lec 7, By/ T.A. Eleyan
3
[5] At a distance r away from a point charge q, the electrical potential is V=400v and the magnitude of the
electric field is E=150N/C. Determine the value of q and r.
[6] Calculate the value of the electric potential at point P due to the charge configuration shown in Figure. Use the values q1=5mC, q2=-10mC, a=0.4m, and b=0.5m.
General Physics II, Lec 7, By/ T.A. Eleyan
4
[7] Two large parallel conducting plates are 10cm apart and carry equal and
opposite charges on their facing surfaces. An electron placed midway between the two plates experiences a
force of 1.6×1015N. What is the potential difference between the plates?
[8] Two point charges are located as shown in, where ql=+4mC, q2=-2mC, a=0.30m, and b=0.90m. Calculate the value of the electrical potential at points P1, and P2. Which point is at the higher potential?
General Physics II, Lec 7, By/ T.A. Eleyan
5
[9] In figure prove that the work required to put four charges together on the corner of a square of radius a is given by
a
qW
0
221.0
[10] The electric potential at point P is given by the sum of the electric potential from the three charges
General Physics II, Lec 7, By/ T.A. Eleyan
6
]11 [Assume we have a system of three point charges:q1 = +1.50 Cq2 = +2.50 Cq3 = -3.50 C.
q1 is located at (0,a)q2 is located at (0,0)q3 is located at (b,0)a = 8.00 m and b = 6.00 m.
What is the electric potential at point P located at (b,a)?
General Physics II, Lec 7, By/ T.A. Eleyan
7
[12] Two charges q=+2×10-6C are fixed in space a distance d=2cm apart, as shown in figure (a) What is the electric potential at point C? (b) You
bring a third charge qn=2.0×10-6C very slowly from infinity to C. How much work must you do? (c) What is the potential energy U of the
configuration when the third charge is in place?
[13] Four equal point charges of charge q=+5mC are located at the corners of a 30cm by 40cm rectangle. Calculate the electric potential
energy stored in this charge configuration.
[14] Two point charges, Q1=+5nC and Q2=-3nC, are separated by 35cm. (a) What is the potential energy of the pair? What is the significance of the algebraic sign of your answer? (b) What is the electric potential at a
point midway between the charges?
General Physics II, Lec 7, By/ T.A. Eleyan
8
[15] What is the potential at the center of the square shown in figure? Assume that q1= +1 ×10-8C, q2= -2×10-8C, q3=+3×10-8C, q4=+2×10-8C, and a=1m.
[16] Two charges of 2mC and -6mC are located at positions (0,0) m and (0,3) m, respectively as shown in figure. (i) Find the total electric potential due to these charges at point (4,0) m. (ii) How much work is required to bring a 3mC charge from ∞ to the point P? (iii) What is the potential energy for the three charges?
General Physics II, Lec 7, By/ T.A. Eleyan
9
[17] A particle having a charge q=3×10-9C moves from point a to point b along a straight line, a total distance d=0.5m. The electric field is uniform
along this line, in the direction from a to b, with magnitude E=200N/C. Determine the force on q, the work done on it by the electric field, and the
potential difference Va-Vb.
[18] For the charge configuration shown in figure , Show that V(r) for the points on the vertical axis, assuming r >> a, is given by
General Physics II, Lec 7, By/ T.A. Eleyan
10
[19] Two stationary point charges are arranged on the x-axis as follows: Q1 = 2.4x10-10 C at x = 0 m and Q2 = -1.2x10-10 C at x = 1 m. An electron is placed at x = 2 m and let go. What is the velocity of the electron when it reaches x =
3 m.
[20] A charge of -1x10-8C weighs 1 g. It is released at rest from point P and moves to point Q. It's velocity at point Q is 1 cm/s. What is the potential difference, VP - VQ?
[21] A charge of -1x10-8C weighs 1 g. It is released at rest from point P and moves to point Q. It's velocity at point Q is 1 cm/s. What is the potential difference, VP - VQ?
-5000V -5V 5V 500V 5000V
General Physics II, Lec 7, By/ T.A. Eleyan
11
[22] An electron initially has velocity 5 x 105 m/s. It is accelerated through a potential of 2 V. What is its final velocity?
6 x 105 m/s 7 x 105 m/s 8 x 105 m/s 9 x 105 m/s 10 x 105 m/s
[23] Initially a proton travels with velocity 5 x 105 m/s perpendicular to a uniform electric field. After 2 milliseconds, the magnitude of the proton's velocity is 7.6 x 105 m/s. What is the magnitude of the electric field?
0.4 V/m 1 V/m 2 V/m 3 V/m 4 V/m