Upload
vuphuc
View
213
Download
0
Embed Size (px)
Citation preview
SHEET NUMBER
1,2,3 & 4
CONTENTS
DRAWING NUMBER85-03-03 - TREND 350 FLARED
END TERMINAL2'-1" Mounting Height/TL-3/Flared
MODEL 617938B
GENERAL NOTES
1. The guardrail end anchorage system represented on this drawing is a proprietary design by Trinity Highwayand marketed under the trade name TREND 350 Flared End Terminal. Any infringement on the rights ofthedesigner shall be the sole responsibility of the user.
2. This drawing is sufficient for plan details for the TREND 350 Flared End Terminal when installed in connection withshoulder guardrail and precludes the requirement for shop drawing submittals unless the plans otherwise call forsuch submittals. The TREND 350 Flared End Terminal shall be assembled in accordance with the manufacturer'sdetailed drawings, procedures and specifications.
3. The TREND 350 Flared End Terminal is a steel post configuration. Post No.1 is a special 2-partyielding post; Post No.2 is a special 1-part yielding post; Post Nos. 3 thru 6 are standard steel posts.
4. The TREND 350 Flared End Terminal is intended for use as an approach end guardrail anchorage for shoulderguardrail. The beginning length of need point is located at Post 3 (see drawing). The effective length of the TREND350 Flared End Terminal is 37'-6". The TREND 350 Flared End Terminal may be installed as a flared endtreatment.
The alignment of the TREND 350 Flared End Terminal is a straight flare with an upstream offset from 0' to 4'(standard offset of 4' should be used whenever possible).
5. For galvanizing requirements of metallic components, see Standard Specification Section 967.
6. For detail of shoulder widening, miscellaneous asphalt pavement and pay limits, see Index 400.
7. The TREND 350 Flared End Terminal shall be paid for under the contract unit price for Guardrail, End AnchorageAssembly, EA and shall be full compensation for furnishing and installing all components in accordancewith the plans; the manufacturer's detail drawings, procedures and specifications and this drawing.
8. Site Conditions: None
The drawings and the information shown thereon are copyrighted by TRINITY HIGHWAY PRODUCTS. LLC. (2012) and the sole property of TRINITY HIGHWAY PRODUCTS, LLC. Neither the drawings nor such information is to be used for any purpose other than that for which it was specifically furnished from TRINITY HIGHWAY PRODUCTS, LLC, nor is any reproduction authorized without written permission.MODEL NO:
5/10/2013 618896BP. KruseCHECKED:
B. EckertDATE: FilE:
8/1/2014 85-03-03.idw
TRINITY"'llIIlIIIIIlI~ .:lIil#"""'4
UNLESS OTHERWISE NOTED, ALL DIMENSIONS ARE IN METERS [INCH].
DIMENSIONS ACCORDING TO ASME Y14.5M-1994 UNLESS OTHERWISESPECIFIED.
Revision
DO NOT SCALE DRAWINGECO Date Rev By Chk.
TREND 350 FLARED END TERMINAL(2'-1" Mounting Height/TL-3/Flared)
FLORIDA QPL NO. S536-0308
-{3--@ rRAWING 85-03-03ENG-FE·048 Rev A, 12/9/2013
ENG FE ~8 Rev A, 121912013
Standard Guardrail, Special End Measurement For Guardrail Payment
Transition or Other SpecialEnd Anchorage Assembly - Flared (53'-1f')Treatment / Location Station
12'-6"15'-7~" Beginning Of Length Of Need~ Impact Head
~0--
I~ : = =
I- I~- = I L:I~
W-Be'm M;d,p,n f_I
~ N <TRAFFIC-~,
Panel Splice (Typ.)N
Misc. Asphalt Pav!.
I~ .1 14 .14 I I I6'-3" (TYP) 6'-3" 6'-3" 6'-3" 6'-3" 6'-3"
Standard FOOT Post ELEVATION VIEW 6'-3" I
SYSTEM LENGTH - 39'-2t"
DESIGN LENGTH - 37'-6"
End Measurement For Guardrail Payment
- V Impact Head
--'I'
~::I~ :::---::: r:::Standard Guardrail, Special -------;::;-
rh... .... Q)
Transition or Other Special rn
1-1 --- ll=Treatment 0
4
"I 1-1 --- E-- De
::J
1-1 Beginning Of Length Of Need /
--~':!.!:!.!:.eLine E
~~ 0
'x:[., -- ro12'-6" 2:
- I':-·h rI.~
\\\\\Tl1-t'-'lll/~'-=c
,,'\~~1!.:...S.q~S'411'l 37'-6" At 1:~ Flare Rate (max.) <TRAFFIC~ ~\el"."'~'l~ '" . ~::::*./ <?-/- zPl+- *~ End Anchorage Assembly - Flared (53'-1~")
~lo~uon Stet;on
:::_l No.7fi1Q1 ~ :::- ... l~:-
~~\8~f.h-Hl"§ PLAN VIEW'~4\ STATE OF ./12 Specification 536 - End Anchorage Assembly (Flared)
~~~~OR\Ot:...~~~ MODEL SYSTEM SYSTEM SYSTEM DESIGN DESIGN TEST LEVELNUMBER WIDTH HEIGHT LENGTH LENGTH SPEED DESIGNATION-/"llOA"'A("~\\\", 618896B 11'-7/8" 31" 39'-2 1/4" 37'-6" ~50 MPH TL-3
II/f/lll\\'\\
The drawings and the information shown thereon are copyrighted by TRINITY HIGHWAY PRODUCTS, LLC. (2012) and the sole property of TRINITY HIGHWAY PRODUCTS, LLC. Neither the drawings nor such information is to be used for any purpose other than that for which it was specifically furnished from TRINITY HIGHWAY PRODUCTS, LLC, nor is any reproduction authorized without written permission.DRAWN: DATE: MODEL NO:
P. Kruse 5/10/2013 618896B TRINITYCHECKED: DATE: FILE: ~ ".. ·:113#\·~ts.B. Eckert 8/1/2014 85-03-03.idwUNLESS OTHERWISE NOTED, ALL DIMENSIONS ARE IN METERS [INCH).
DIMENSIONS ACCORDING TO ASME Y14.5M-1994 UNLESS OTHERWISE DO NOT SCALE DRAWING TREND 350 FLARED END TERMINALSPECIFIED.
Revision ECO Date Rev By Chk. (2'-1" Mounting HeightlTL-3/Flared)FLORIDA QPL NO. 8536-0308
-@ DRAWING' rHEET
' 2 rvr-,85-03-03 of 4I.---.l -
..
2
2
2
2
2
2
2
2
2
2
2
2
2
2
7
6
7
4
5
4
6
34
34
34
QTY.
WASHER,FLAT,5/8,THICK,G
3/4" LOCK WASHER
DESCRIPTION
3/8"X2" HEX BOLT GR-5 HOG
3/4" HVY HEX NUT A563 DH
CBL 3/4X8'01DBL SWG
3/8" HVY HEX NUT A563GRDH
PARTS LIST
3/4"X2.5" HEX BOLT A325
MANUAL,PRODUCT,TREND 350 FLARED
3/8" ROUND WASHER F436
3/8" LOCK WASHER
3/4" ROUND WASHER F436
WASHER,BAR,1/4X2X89M,W/SLOT
HBA-BRG PLIWELDED TABS
1" HEX NUT A563
1" ROUND WASHER F844
5/8" HVY HEX NUT A563 DH
SYT-3"AN STRT 3-HL 6'6
BOLT,RAIL,5/8X2,G5,G
TRND350 HBA BKY PST2'8.75
NUT,HX,5/8,G,RAIL
ET HBA P1-2 BTM X 6-1 1/2
RAIL,W/FIN,W-SHAPE,525
RAIL,W-SHAPE,2228,W/FIN
5/8"X2" HEX BOLT A307
RAIL,W-SHAPE,2228
7/16" HEX NUT A563 DH
BACKING PLATE,POST,TE
SPACER,CABLE ANCHOR,TE,G
6'0 PST/8.5#/SYTP
7/16" WASHER F844
7/16" LOCK WASHER
SPACER,POST/RAIL,TE,G
HEAD/RAIL350TE,G,W/DECALS
6'0 POST/8.5/DDR
7/16"X1.5" HEX BOLT GRD 5
618897B
006405
004393
004389
003704G
004254
003701
004396
003717
004390
004258
006321
004699G
118614
003012G
003361
019258
003910
033795
003340
STOCK NO.
003900
118615
014578
003403
034074
617000
033873
614512G
614529G
604465
000533
618193
613554
618194
618192
3
9
5
35
31
4
32
6
34
2
7
8
28
29
27
30
23
21
25
26
24
33
14
18
20
12
17
15
19
22
13
16
11
10
ITEM16
-
27 28 29 30
10
lll)
oa.
-
DETAIL D
11
10
Nlll)
oa.
5
9
(BLON
-
ELEVATION
' ...../ I K ~ r ~
~] (if !~-~-~r----{)-~V$'e915i===!=~1==7~'~I'-)--SE-E-D-ET-A-IL-D~~
SEE DETAIL C 9 ~\:.Vu--------'-
DETAIL C
37'-6"
PLAN
9
~ V MI- I- l-ll) lI) lI)
000a. a. a.
(?)SEE DETAILA~EEDETAIL B
'\ 0-. ~--, &..
--I
DETAIL B
2
8
CD
lll)
oa.
~DETAIL A
'- 6'-3" TYP.
SEE SHEET 2FOR GUARDRAILCONFIGURATION
2'-1"-
s::JFOOT POST
Jr
TOLERANCES PER ~TRINITVQMS-SF-001, UNLESS ~",. W:llriU''''·S.
OTHERWISE SPECIFIED. TREND 350 FLARED END TERMINALDO NOT SCALE DRAWING (2'-1" Mounting Height/TL-3/Flared)
ECO Date Rev By Chk. FLORIDA QPL NO. S536-030810103/12 AJC
MATERIAL: FINISH:- - PLK SEE PARTS LIST N/A
3566 1/24113 B WWL JMESHEET:
3774 12/27/13 C WWL JME B--@ rRAW1N
S5_03_03 3 of 4rEV
C
3/21/2012DATE:
DATE:
677.45 Ibmass ITEM 22 WAS 115971 G & WEIGHT WAS 876.58 LBSESTIMATED WEIGHT:
DRAWN:The drawings and the information shown thereon B. Sindorfare copyrighted by TRINITY HIGHWAY CHECKED'
PRODUCTS, LLC. (2012) and the sole property P. Kruseof TRINITY HIGHWAY PRODUCTS, LLC. UNLESSOTHERWISENOTED,ALLDIMENSIDNS::':~~~:;Neither the drawings nor such information is to DIMENSIONS ACCORDING TOASME Y14.5M-1994 UNLESS OTHERWISE
be used for any purpose other than that for which I-=---:--:-- -"'SP-=.:EC;:;..;IFI:=::ED::.....------+::-::-=o---=---:---;:::--r-::---,--::7"":"""""iit was specifically furnished from TRINITY RevisionHIGHWAY PRODUCTS, LLC, nor is any UPDATED TITLE BLOCKreproduction authorized without writtenpermission. ADDED NOTE 3
MISC. ASPHALT PAVT.
NOTES:1. SYSTEM CAN BE FLARED UP TO AN OFFSET OF 4'-0".2. REFER TO SYSTEM MANUAL FOR POST OFFSET DIMENSIONS.
ENG-FE-046 Rev A, 1219/2013
uDETAIL FDETAIL E
~SE~ DETAIL_H__!
-SEE NOTE 1
910
DETAIL G
DETAIL H
SECTION A-A SECTION B-B
CREV
ENG-FE-046 Rev A, 1219/2013
..
4 of 4SHEET:
2'-1"
SEE SHEET 2FOR GUARDRAILCONFIGURATION
85-03-03DRAWING--8--
6'-3" TYP.
3774 12/27/13 C WWL
\
-)j~MISC. ASPHALT PAVT. --./ - ---c:;r-E-E-D-E-T'-A-I-L-F--l !r--
STANDARD FOOT POST
I~
JSEE DETAIL E
,.--rI
DATE:DMWN:
B
B~
II
L!ELEVATION
677.45Ibmass SEE SHEET 1ESTIMATED WEIGHT:
The drawings and the information shown thereonare copyrighted by TRINITY HIGHWAY B. Sindorf 3/21/2012 TOLERANCES PER TRINITYPRODUCTS, LLC. (2012) and the sole property CHECKED DAlE QMS-SF-001, UNLESS ".. .:@""".,.ofTRINITY HIGHWAY PRODUCTS, LLC. P. Kruse 5/14/2012 OTHERWISE SPECIFIED. TREND 350 FLARED END TERMINALNeither the drawings nor such information is to UNLESS OTHERWISE NOTED, ALL DIMENSIONS ARE IN INCHES.be used for any purpose other than that for which I-::::-DI_ME..,...NS..,...'O_NS_AC_CO_R_DIN_G_TO~:~,=::~CE~lFi.=::~6,-SM_-19_94_uN_LE_ss_o_TH_ER_wl_sE-+....:D=-O::....;.:N:.,:O~T....:S:.:C::.A.;:L:..::E~D:;..:R..::.A..:..:W..:.,I~N:.,:G:........j (2'-1" Mounting Height/TL-3/Flared)itwasspecificallyfurnishedfromTRINITY Revision ECO Date Rev By Chk. FLORIDA QPL NO. S536-0308HIGHWAY PRODUCTS, LLC, nor is any
UPDATED TITLE BLOCK 10103/12 - PLK AJC MSATEERE'AcpARTS LIST "NN,s/HA'reproduction authorized without written I--------------I--+-=-:..::....::..~+--+-=-+..::...:...j
permission. SEE SHEET 1 3566 1/24113 B WWL
A
-_W
2'-9"(SEE NOTE 2)
SEE DETAIL G
FRONT
NOTES:1
1. 2" DIAMETER HOLES IN SYTP POST (ITEM 9) APPROXIMATELY CENTERED ON GROUND LINE.2. DIMENSION IS FIXED REGARDLESS OF VARYING DOWNSTREAM GUARDRAIL HEIGHTS.3. FOR ALL STRUT INSTALLATIONS, THE INSTALLER MUST PROVIDE A SHALLOW VALLEYITROUGH
FOR INSTALLATION OF THE STRUT, SINCE A PORTION OF THE ANGLE STRUT WILL BE BELOWGRADE.